REV. Status AUDIO COUPLING MINIATURE ENCAPSULATED TRANSFORMER DESIGNED TO OPERATE (O REVISION 3OmW MAX IN SECONDARY AND REFLECT A PRIMARY SOURCE IMPEDANCE OF fr 04/06/98 TS APPROXIMATELY 25KQ WITH 1KQ SPLIT LOAD ON SECONDARY. m O REVISION A : tet att D> ADDED RoHS A. Electrical Specifications (@ 20C) > | 12/02/05 MP _| 1. Pri Source Impedance; 25K? mo -- REVISION B 2. Sec Load Impedance; 1KQ SPLIT 5 Li ADDED TEMP 3. Pri DC Current; 0.25mA MAX =| > 4 ie uP 4. Operating Level; 30mW MAX @ 300Hz 4729/15 MP _ 5. Frequency Response (relative to 1KHz); +2.0dB, @ 30OHz to 100KHz 6. Longitudinal Balance; 60dB MIN @ 1KHz 7. DC Resistance; 1-2) 16000 +20% 3-6) 950 +20% 8. Turns Ratio; (1-2) : (3-4) : (5-6) = 10.0: 1.0 : 1.0 42% 9. Dielectric Strength; 60Hz 500Vrms 0.5 minute @ Pri Sec B. Marking; METO6, TAMURA, Primary and Secondary Impedance, PM13M, MICROTRAN, TF5S21ZZ, date code and country of origin C. Operating Temperature: 20 to +85C Storage Temperature: 55 to +105C PM13M D. Schematic Diagram eR PRI SEC 10-5 6 2500 e EKO 5 KacT 4 (CONNECT 4-5) [ 2500 2 * 93 _ E. Mechanical Specifications Date code, and country of origin 11.80(0.465) MAX f Peeters ) 19.0(0.75) MIN (6 PLACES) @ 0.5(0.02) 6 PLACES TIN PLATED 7.6+0.25(0.30+0.01) 3 4 ee 7.87(0.31) MAX | 2 5 5.00+0.25(0.20+0.01) TYP 45 20+ 03 | 5 20 <= 50+ 0.4 PREPARED BY: 2.50+0.25(0.10+0.01) TYP 10.4(0.41)MAX C. POPPE ENGINEER: DRAWING CONTROL NO.| REV MODEL DESCRIPTION MODEL SPECIFICATION MATHI P P-A1-12002 | B AUDIO COUFLING MINIATURE ENCAPSULATED _XFMR METO6 SAFETY ENGINEER] contENTS OF THIS DRAWING ARE CORPORATION OF AMERICA SUBJECT TO CHANGE WITHOUT | 1949 sour {NDREASEN DRIVE, #100 ESCONDIDO, CA. 92029 PRIOR NOTICE 699-1270 "FAX FESONDDO, DIM: mmLin] SCL: 2/1 | se: 10F 1 APPROVED: PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN M. PITCHAI CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING.