DSPIC30F6012T-30I/PF - Microchip Technology

dsPIC30F6011/6012/6013/6014

Data Sheet

High-Performance, 16-Bit

Digital Signal Controllers

Information contained in this publication regarding device

applications a nd the like is p ro vid ed only f or yo ur c o n ve nience

and may be supers eded by updates. It is y our res po nsibilit y to

ensure that your application meets with your specifications.

MICROCHIP MAKES NO REPRESENTATIONS OR

WARRANTIES OF ANY KIND WHETHER EXPRESS OR

IMPLIED, WRITTEN OR ORAL, STATUTORY OR

OTHERWISE, RELATED TO THE INFORMATION,

INCLUDING BUT NOT LIMITED TO ITS CONDITION,

QUALITY, PERFORMANCE, MERCHANTABILITY OR

FITNESS FOR PURPOSE. Microchip disclaims all liability

arising from this information and its use. Use of Microchip

devices in life support and/or safety applications is entirely at

the buyer’s risk, and the buyer agrees to defend, indemnify and

hold harmless Microchip from any and all damages, claims,

suits, or expenses resulting from such use. No licenses are

conveyed, implicitly or otherwise, under any Microchip

intellectual property rights.

Trademarks

The Microchip name and logo, the Microchip logo, Accur on,

dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICST ART,

PRO MATE, PowerSmart, rfPIC and SmartShunt are

registered trademarks of Microchip Technology Incorporated

in the U.S.A. and other countries.

AmpLab, FilterLab, Migratable Memory, MX DEV, MXLAB,

SEEV AL, SmartSensor and The Embedded Control Solutions

Company are registered trademarks of Microchip Technology

Incorporated in the U.S.A.

Analog-for-the-Digital Age, Application Maestro, CodeGuard,

dsPICDEM, dsPICDEM.net, dsPICworks, ECAN,

ECONOMONITOR, FanSense, FlexROM, fuzzyLAB,

In-Circuit Serial Programming, ICSP, ICEPIC, Linear Active

Thermistor, Mindi, MiWi, MPASM, MPLIB, MPLINK, PIC kit,

PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal,

PowerInf o, PowerMate, PowerTool, REAL ICE, rfLAB,

rfPICDEM, Select Mode, Smart Serial, SmartTel, Total

Endurance, UNI/O, WiperLock and ZENA are trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

SQTP is a service mark of Microchip Technology Incorporated

in the U.S.A.

All other trademarks mentioned herein are property of their

respective companies.

Printed on recycled paper.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrit y of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violat ion of the Digital Millennium Copyright Act. If suc h a c t s

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2002 certification for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and

T empe, Arizona, Gresham, Oregon and Mountain View , California. The

Company’s quality system processes and procedures are for its PIC®

8-bit MCUs, KEELOQ® code hopping devices, Serial EEPROMs,

microperipherals, nonvolatile memory and analog products. In addition,

Microchip’s quality system for the design and manufacture of

development systems is ISO 9001:2000 certified.

dsPIC30F6011/6012/6013/6014

High-Performance Modified RISC CPU:

• Modified Harvard architecture

• C compiler optimized in struction set architecture

• Flexible addressing modes

• 83 base instructions

• 24-bit wide instructions, 16-bit wide data path

• Up to 144 Kbytes on-chip Flash program space

• Up to 48K in struction words

• Up to 8 Kbytes of on-chip data RAM

• Up to 4 Kbytes of nonvolatile data EEPROM

• 16 x 16-bit working register array

• Up to 30 MIPS operation:

- DC to 40 MHz external clock input

- 4 MHz-10 MHz oscillator input with PLL

active (4x, 8x, 16x)

• Up to 41 interrupt sources:

- 8 user-selectable priority levels

- 5 external interrupt sources

- 4 processo r traps

DSP Features:

• Dual data fetch

• Modulo and Bit-Reversed modes

• Two 40-bit wide accumulators with optional

saturati on log ic

• 17-bit x 17-bit single cycle hardware fractional/

integer multiplier

• All DSP instructions are single cycle:

- Multiply-Accumulate (MAC) operation

• Single-cycle ±16 shift

Peripheral Feat ures:

• High current sink/source I/O pins: 25 mA/25 mA

• Five 16-bit timers/counters; optionally pair up

16-bit timers into 32-bit timer modules

• 16-bit Capture input functions

• 16-bit Compare/PWM output functions

• Data Converter Interface (DCI) supports common

audio Codec protocols, including I2S and AC’97

• 3-wire SPI modules (supports 4 Frame modes)

•I

2C™ module supports Multi-Master/Slave mode

and 7-bit/10-bit addressing

• Two addressable UART modules with FIFO

buffers

• Two CAN bus modules compliant with CAN 2.0B

standard

Analog Features:

• 12-bit Analog-to-Digital Converter (ADC) with:

- 200 ksps co nve rsion rate

- Up to 16 input channels

- Conversion available during Sleep and Idle

• Programmable Low-Voltage Detection (PLVD)

• Programmable Brown-out Reset

Special Microcontroller Features:

• Enhanced Flash program memory:

- 10,000 erase/write cycle (min.) for

industrial temperature range, 100K (typical)

• Data EEPROM memory:

- 100,000 erase/wri t e cycle (min.) for

industrial temperature range, 1M (typical)

• Self-reprogrammable under software control

• Power-on Reset (POR), Power-up Timer (PWR T)

and Oscillator Start-up Timer (OST)

• Flexible Watchdog Timer (WDT) with on-chip low

power RC oscillator for reliable operation

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157).

dsPIC30F6011/6012/6013/6014 High-Performance

Digital Signal Controllers

dsPIC30F6011/6012/6013/6014

Special Microcontroller Features (Cont.):

• Fail-Safe Clock Monitor operation:

- Detect s clo ck failure and switch es to on-c hip

low power RC oscillator

• Programmable code protection

• In-Circuit Serial Programming™ (ICSP™)

• Selectable Power Management modes:

- Sleep, Idle and Alternate Clock modes

CMOS Technology:

• Low-power, high-speed Flash technology

• Wide operating voltage range (2.5V to 5.5V)

• Industrial and Extended temperature ranges

• Low power consumption

dsPIC30F6011/6012/ 6013/6014 Controller Families

Device Pins Program Mem ory SRAM

Bytes EEPROM

Bytes Timer

16-bit Input

Cap

Output

Comp/Std

PWM

Codec

Interface A/D 12-bit

200 ksps

UART

SPI

I2C™

CAN

Bytes Instructions

dsPIC30F6011 64 132K 44K 6144 2048 5 8 8 — 16 ch 2 2 1 2

ds PIC30F6012 64 144K 48K 8192 4096 5 8 8 AC’97, I2S 16 ch 2 2 1 2

dsPIC30F6013 80 132K 44K 6144 2048 5 8 8 — 16 ch 2 2 1 2

ds PIC30F6014 80 144K 48K 8192 4096 5 8 8 AC’97, I2S 16 ch 2 2 1 2

dsPIC30F6011/6012/6013/6014

Pin Diagrams

Note: For descriptions of individual pins, see Section 1.0 “Device Overview”.

13 36

EMUC1/SOSCO/T1CK/CN0/RC14

EMUD1/SOSCI/T4CK/CN1/RC13

EMUC2/OC1/RD0

IC4/INT4/RD11

IC2/INT2/RD9

IC1/INT1/RD8

VSS

OSC2/CLKO/RC15

OSC1/CLKI

VDD

SCL/RG2

EMUC3/SCK1/INT0/RF6

U1RX/SDI1/RF2

EMUD3/U1TX/SDO1/RF3

RG15

T2CK/RC1

T3CK/RC2

SCK2/CN8/RG6

SDI2/CN9/RG7

SDO2/CN10/RG8

MCLR

VSS

VDD

AN3/CN5/RB3

AN2/SS1/LVDIN/CN4/RB2

PGC/EMUC/AN1/VREF-/CN3/RB1

PGD/EMUD/AN0/VREF+/CN2/RB0

OC8/CN16/RD7

RG13

RG12

RG14

VSS

C2TX/RG1

C1TX/RF1

C2RX/RG0

EMUD2/OC2/RD1

OC3/RD2

AN6/OCFA/RB6

AN7/RB7

AVDD

AVSS

AN8/RB8

AN9/RB9

AN10/RB10

AN11/RB11

VSS

VDD

AN12/RB12

AN13/RB13

AN14/RB14

AN15/OCFB/CN12/RB15

U2TX/CN18/RF5

U2RX/CN17/RF4

SDA/RG3

SS2/CN11/RG9

AN5/IC8/CN7/RB5

AN4/IC7/CN6/RB4

IC3/INT3/RD10

VDD

C1RX/RF0

OC4/RD3

OC7/CN15/RD6

OC6/IC6/CN14/RD5

OC5/IC5/CN13/RD4

64-Pin TQFP

dsPIC30F6011

*dsPIC30F6011A recommended for new designs

dsPIC30F6011/6012/6013/6014

Pin Diagrams (Continued)

Note: For descriptions of individual pins, see Sect ion 1.0 “Device Over vi ew ”.

13 36

EMUC1/SOSCO/T1CK/CN0/RC14

EMUD1/SOSCI/T4CK/CN1/RC13

EMUC2/OC1/RD0

IC4/INT4/RD11

IC2/INT2/RD9

IC1/INT1/RD8

VSS

OSC2/CLKO/RC15

OSC1/CLKI

VDD

SCL/RG2

EMUC3/SCK1/INT0/RF6

U1RX/SDI1/RF2

EMUD3/U1TX/SDO1/RF3

COFS/RG15

T2CK/RC1

T3CK/RC2

SCK2/CN8/RG6

SDI2/CN9/RG7

SDO2/CN10/RG8

MCLR

VSS

VDD

AN3/CN5/RB3

AN2/SS1/LVDIN/CN4/RB2

PGC/EMUC/AN1/VREF-/CN3/RB1

PGD/EMUD/AN0/VREF+/CN2/RB0

OC8/CN16/RD7

CSDO/RG13

CSDI/RG12

CSCK/RG14

VSS

C2TX/RG1

C1TX/RF1

C2RX/RG0

EMUD2/OC2/RD1

OC3/RD2

AN6/OCFA/RB6

AN7/RB7

AVDD

AVSS

AN8/RB8

AN9/RB9

AN10/RB10

AN11/RB11

VSS

VDD

AN12/RB12

AN13/RB13

AN14/RB14

AN15/OCFB/CN12/RB15

U2TX/CN18/RF5

U2RX/CN17/RF4

SDA/RG3

SS2/CN11/RG9

AN5/IC8/CN7/RB5

AN4/IC7/CN6/RB4

IC3/INT3/RD10

VDD

C1RX/RF0

OC4/RD3

OC7/CN15/RD6

OC6/IC6/CN14/RD5

OC5/IC5/CN13/RD4

64-Pin TQFP

dsPIC 30 F60 12

*dsPIC30F6012A recommended for new designs

dsPIC30F6011/6012/6013/6014

Pin Diagrams (Continued)

Note: For descriptions of individual pins, see Section 1.0 “Device Overview”.

22 80

IC5/RD12

OC4/RD3

OC3/RD2

EMUD2/OC2/RD1

RG14

CN23/RA7

CN22/RA6

C2RX/RG0

C2TX/RG1

C1TX/RF1

C1RX/RF0

RG13

RG12

OC8/CN16/RD7

OC6/CN14/RD5

EMUC2/OC1/RD0

IC4/RD11

IC2/RD9

IC1/RD8

INT4/RA15

IC3/RD10

INT3/RA14

VSS

OSC1/CLKI

VDD

SCL/RG2

U1RX/RF2

U1TX/RF3

EMUC1/SOSCO/T1CK/CN0/RC14

EMUD1/SOSCI/CN1/RC13

VREF+/RA10

VREF-/RA9

AVDD

AVSS

AN8/RB8

AN9/RB9

AN10/RB10

AN11/RB11

VDD

U2RX/CN17/RF4

IC8/CN21/RD15

U2TX/CN18/RF5

AN6/OCFA/RB6

AN7/RB7

T3CK/RC2

T4CK/RC3

T5CK/RC4

SCK2/CN8/RG6

SDI2/CN9/RG7

SDO2/CN10/RG8

MCLR

SS2/CN11/RG9

AN4/CN6/RB4

AN3/CN5/RB3

AN2/SS1/LVDIN/CN4/RB2

PGC/EMUC/AN1/CN3/RB1

PGD/EMUD/AN0/CN2/RB0

VSS

VDD

RG15

T2CK/RC1

INT2/RA13

INT1/RA12

AN12/RB12

AN13/RB13

AN14/RB14

AN15/OCFB/CN12/RB15

VDD

VSS

OC5/CN13/RD4

IC6/CN19/RD13

SDA/RG3

SDI1/RF7

EMUD3/SDO1/RF8

AN5/CN7/RB5

VSS

OSC2/CLKO/RC15

OC7/CN15/RD6

EMUC3/SCK1/INT0/RF6

IC7/CN20/RD14

80-Pin TQFP

dsPIC30F6013

*dsPIC30F6013A recommended for new designs

dsPIC30F6011/6012/6013/6014

Pin Diagrams (Continued)

Note: For descriptions of individual pins, see Sect ion 1.0 “Device Over vi ew ”.

22 80

IC5/RD12

OC4/RD3

OC3/RD2

EMUD2/OC2/RD1

CSCK/RG14

C2RX/RG0

C2TX/RG1

C1TX/RF1

C1RX/RF0

CSDO/RG13

CSDI/RG12

OC8/CN16/RD7

OC6/CN14/RD5

EMUC2/OC1/RD0

IC4/RD11

IC2/RD9

IC1/RD8

INT4/RA15

IC3/RD10

INT3/RA14

VSS

OSC1/CLKI

VDD

SCL/RG2

U1RX/RF2

U1TX/RF3

EMUC1/SOSCO/T1CK/CN0/RC14

EMUD1/SOSCI/CN1/RC13

VREF+/RA10

VREF-/RA9

AVDD

AVSS

AN8/RB8

AN9/RB9

AN10/RB10

AN11/RB11

VDD

U2RX/CN17/RF4

IC8/CN21/RD15

U2TX/CN18/RF5

AN6/OCFA/RB6

AN7/RB7

T3CK/RC2

T4CK/RC3

T5CK/RC4

SCK2/CN8/RG6

SDI2/CN9/RG7

SDO2/CN10/RG8

MCLR

SS2/CN11/RG9

AN4/CN6/RB4

AN3/CN5/RB3

AN2/SS1/LVDIN/CN4/RB2

PGC/EMUC/AN1/CN3/RB1

PGD/EMUD/AN0/CN2/RB0

VSS

VDD

COFS/RG15

T2CK/RC1

INT2/RA13

INT1/RA12

AN12/RB12

AN13/RB13

AN14/RB14

AN15/OCFB/CN12/RB15

VDD

VSS

OC5/CN13/RD4

IC6/CN19/RD13

SDA/RG3

SDI1/RF7

EMUD3/SDO1/RF8

AN5/CN7/RB5

VSS

OSC2/CLKO/RC15

OC7/CN15/RD6

EMUC3/SCK1/INT0/RF6

IC7/CN20/RD14

80-Pin TQFP

dsPIC30F6014

CN23/RA7

CN22/RA6

*dsPIC30F6014A recommended for new designs

© 2006 Microchip Technology Inc. DS70117F-page 7
dsPIC30F6011/6012/6013/6014
Table of Contents
1.0 Device Overview .......................................................................................................................................................................... 9
2.0 CPU Architecture Overview........................................................................................................................................................ 15
3.0 Memory Organization................................................................................................................................................................. 25
4.0 Address Generator Units............................................................................................................................................................ 39
5.0 Interrupts.................................................................................................................................................................................... 45
6.0 Flash Progra m Memo ry.................. ..................... ........................... ........................... ................................................................. 51
7.0 Da ta EEPROM Memory............... ........................... ..................... ........................... ................................................................... 57
8.0 I/O Ports....... ............................ ................................. ........................... ...................................................................................... 63
9.0 Timer1 Module ........................................................................................................................................................................... 69
10.0 Timer2/3 Module ................. .. ..... .. .... .. .. .. .. ....... .. .. .. .... .. .. .. ....... .. .. .. .... .. .. ..... .... .. .. .. .. .... ..... ............................................................ 73
11.0 Timer4/5 Module  ....................... .. .. .... .. .. .. .. ....... .. .. .... .. .. .. ....... .. .. .. .. .... .. ..... .. .... .. .. .. .. ....... ............................................................ 79
12.0 Input Capture Module............................. .... ..... .... .. .. .... .. .. ....... .. .... .. .. .... ..... .... .. .. .... .. .. ....... .......................................................... 83
13.0 Output Compa re Module........................ ..................... ..................... ..................... ..................................................................... 87
14.0 SP I Module................................................................................................................................................................................. 91
15.0 I2C Module................................................................................................................................................................................. 95
16.0 U nivers al Asynchr onous Receiver  Transmi tter (UART) Module .............................................................................................. 103
17.0 CAN Module............................................................................................................................................................................. 111
18.0 Data Converter Interface (DCI) Module......................................................... .... .... .... ........... .... ................................................ 125
19.0 12-bit Analog-to-Digital Converter (A/D) Module...................................................................................................................... 135
20.0 System Inte g r a tion ................ ..................... ..................... ............................ ................... .......................................................... 145
21.0 Instruction Set Summary.......................................................................................................................................................... 161
22.0 Development Support............................................................................................................................................................... 169
23.0 Electrical Characteristics.......................................................................................................................................................... 173
24.0 Packagin g  In fo rmation.............................. ..................... ............................ ............................................................................... 211
Appendix A: Revision History . ............................................................................................................................................................ 215
Index .................................................................................................................................................................................................. 217
The Micro chip Web Site...... ........................... ........................... ............................ ............................................................................. 223
Customer Change Notification Service......................................................................... ...... ............................................................... 223
Customer Support............................................................... .... ............. ...... ............. ...... .... ................................................................. 223
Reader Response.............................................................................................................................................................................. 224
Product Identification System ............................................................................................................................................................ 225
TO OUR VALUED CUSTOMERS
It is our intention to  provide our valued customers with the best documentation possible to ensure successful use of your Microchip
products. To this end, we will continue to improve our pu blications to better s uit your needs. Our publications will be refined and
enhanced as new volumes and updates are introduced. 
If you have  any questions o r c omm ents regarding this publication, please c ontact the M arketing Communications Department via
E-mail at docerrors@microchip.com or fax the Reader Response Form in the back of this data sheet to (480) 792-4150. We
welcome your feedback.
Most Current Data Sheet
To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at:
http://www.microchip.com
You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of an y page.
The last character of the literature number is the version number, (e.g., DS30000A is version A of document DS30000).
Errata
An errata sheet, describing minor operational differences from the data sheet  and recommended workarounds, may exist for current
devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision
of silicon and revision of document to which it applies.
To determine if an errata sheet exists for a particular device, please check with one of the following:
• Microchip’s Worldwide Web site; http://www.microchip.com
• Your local Microc hip sales office (see last page)
When contacting a sales office, please specify which device, revision of silicon and data sheet (include  literature number) you are
using.
Customer Noti fic atio n Syst em
Register on our web site at www.microchip.com to receive the most current information on all of our products.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

1.0 DEVICE OVERVIEW This document contains specific information for the

dsPIC30F6011/6012/6013/6014 Digital Signal Control-

ler (DSC) devices. The dsPIC30F devices contain

extensive Digital Signal Processor (DSP) functionality

within a high-performance 16-bit microcontroller (MCU)

architecture. Figure 1-1 and Figure 1-2 show device

block diagrams for dsPIC30F6011/6012 and

dsPIC30F6013/6014 respectively.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157).

dsPIC30F6011/6012/6013/6014

FIGURE 1- 1: dsPIC30F601 1 /6012 BLOCK DIAGRAM

AN8/RB8

AN9/RB9

AN10/RB10

AN11/RB11

Power-up

Timer

Oscillator

S tart-up Timer

POR/BOR

Reset

Watchdog

Timer

Instruction

Decode &

Control

OSC1/CLKI

MCLR

, V

AN4/IC7/CN6/RB4

AN12/RB12

AN13/RB13

AN14/RB14

AN15/OCFB/CN12/RB15

Low-Voltage

Detect

UART1,

CAN2

Timing

Generation

CAN1,

AN5/IC8/CN7/RB5

PCH PCL

Program Counter

ALU<16>

X Data Bus

C™

DCI

AN6/OCFA/RB6

AN7/RB7

PCU

12-bit ADC

Timers

SCK2/CN8/RG6

SDI2/CN9/RG7

SDO2/CN10/RG8

SS2/CN11/RG9

Input

Capture

Module

Output

Compare

Module

EMUC1/SOSCO/T1CK/CN0/RC14

EMUD1/SOSCI/T4CK/CN1/RC13

T2CK/RC1

PORTB

C2RX/RG0

C2TX/RG1

SCL/RG2

SDA/RG3

PORTG

PORTD

16 16

16 x 16

W Reg Array

Divide

Unit

Engine

DSP

Decode

ROM Latch

Y Data Bus

Effective Address

X RAGU

X WAGU

Y AGU

PGD/EMUD/AN0/V

REF

+/CN2/RB0

PGC/EMUC/AN1/V

REF

-/CN3/RB1

AN2/SS1/LVDIN/CN4/RB2

AN3/CN5/RB3

OSC2/CLKO/RC15

, A V

UART2

SPI2

PORTC

Interrupt

Controller

PSV & Table

Data Access

Control Block

Stack

Control

Logic

Loop

Control

Logic

Data LatchData Latch

Y Data

RAM X Data

RAM

Address

Latch Address

Latch

Control Signals

to Various Blocks

EMUC2/OC1/RD0

EMUD2/OC2/RD1

OC3/RD2

OC4/RD3

OC5/IC5/CN13/RD4

OC6/IC6/CN14/RD5

OC7/CN15/RD6

OC8/CN16/RD7

IC1/INT1/RD8

IC2/INT2/RD9

IC3/INT3/RD10

IC4/INT4/RD11

CSDI*/RG12

CSDO*/RG13

CSCK*/RG14

COFS*/RG15

T3CK/RC2

SPI1,

Address Latch

Program Memory

(Up to 144 Kbytes)

Data Latch

Data EEPROM

(Up to 4 Kbytes)

U2TX/CN18/RF5

EMUC3/SCK1/INT0/RF6

C1RX/RF0

C1TX/RF1

U1RX/SDI1/RF2

EMUD3/U1TX/SDO1/RF3

U2RX/CN17/RF4

PORTF

*Present in the dsPIC30F6012 only.

dsPIC30F6011/6012/6013/6014

FIGURE 1-2: dsPIC30F6013/6014 BLOCK DIAGRAM

AN8/RB8

AN9/RB9

AN10/RB10

AN11/RB11

Power-up

Timer

Oscillator

S tart-up Timer

POR/BOR

Reset

Watchdog

Timer

Instruction

Decode &

Control

OSC1/CLKI

MCLR

, V

AN4/CN6/RB4

AN12/RB12

AN13/RB13

AN14/RB14

AN15/OCFB/CN12/RB15

Low-Voltage

Detect

UART1,

INT4/RA15

INT3/RA14

REF

+/RA10

REF

-/RA9

CAN2

Timing

Generation

CAN1,

AN5/CN7/RB5

PCH PCL

Program Counter

ALU<16>

X Data Bus

C™

DCI

AN6/OCFA/RB6

AN7/RB7

PCU

12-bit ADC

Timers

SCK2/CN8/RG6

SDI2/CN9/RG7

SDO2/CN10/RG8

SS2/CN11/RG9

U2TX/CN18/RF5

EMUC3/SCK1/INT0/RF6

SDI1/RF7

EMUD3/SDO1/RF8

Input

Capture

Module

Output

Compare

Module

EMUC1/SOSCO/T1CK/CN0/RC14

EMUD1/SOSCI/CN1/RC13

T4CK/RC3

T2CK/RC1

PORTB

C1RX/RF0

C1TX/RF1

U1RX/RF2

U1TX/RF3

C2RX/RG0

C2TX/RG1

SCL/RG2

SDA/RG3

POR TG

PORTD

16 16

16 x 16

W Reg Array

Divide

Unit

Engine

DSP

Decode

ROM Latch

Y Data Bus

Effective Address

X RAGU

X WAGU

Y AGU

PGD/EMUD/AN0/CN2/RB0

PGC/EMUC/AN1/CN3/RB1

AN2/SS1/LVDIN/CN4/RB2

AN3/CN5/RB3

OSC2/CLKO/RC15

U2RX/CN17/RF4

, A V

UART2

SPI2

16 PORTA

PORTC

PORTF

Interrupt

Controller

PSV & Table

Data Access

Control Block

Stack

Control

Logic

Loop

Control

Logic

Data LatchData Latch

Y Data

RAM X Data

RAM

Address

Latch Address

Latch

Control Signals

to Various Blocks

EMUC2/OC1/RD0

EMUD2/OC2/RD1

OC3/RD2

OC4/RD3

OC5/CN13/RD4

OC6/CN14/RD5

OC7/CN15/RD6

OC8/CN16/RD7

IC1/RD8

IC2/RD9

IC3/RD10

IC4/RD11

IC5/RD12

IC6/CN19/RD13

IC7/CN20/RD14

IC8/CN21/RD15

CSDI*/RG12

CSDO*/RG13

CSCK*/RG14

COFS*/RG15

T3CK/RC2

SPI1,

INT1/RA12

INT2/RA13

CN23/RA7

CN22/RA6

T5CK/RC4

Address Latch

Program Memory

(Up to 144 Kbytes)

Data Latch

Data EEPROM

(Up to 4 Kbytes)

*Present in the dsPIC30F6014 only.

dsPIC30F6011/6012/6013/6014

Table 1-1 provides a brief description of device I/O

pinouts and the functions that may be multiplexed to a

port pin. Multiple functions may exist on one port pin.

When multiplexing occurs, the peripheral module’s

functional requirements may force an override of the

data direction of the port pin.

TABLE 1-1: PINOUT I/O DESCRIPTIONS

Pin Name Pin

Type Buffer

Type Description

AN0- AN15 I Analog Analog inpu t chan nels.

AN0 and AN1 are also u sed for device prog ra m m i ng data and

clock inputs, respectively.

AVDD P P Positive sup pl y f or a nalog modu le .

AVSS P P Groun d re fe re nce for analog module.

CLKI

CLKO

ST/CMOS

—

Ext ernal clock so urce input. Always associ ated with OSC1 pi n

function.

Oscillat or crystal ou tp ut . Co nnects to crys tal or resonator in

Crystal Oscillator mode. Optionally functions as CLKO in RC

and EC modes. Always associa te d wi th O SC 2 pin

function.

CN0- C N23 I ST Input change notifi cat ion inputs.

Can be software programmed for internal weak pull-ups on all

inputs.

COFS

CSCK

CSDI

CSDO

I/O

—

Data Converter Interface frame synchronization pin.

Data Conve rter In te rf ac e serial cloc k i nput/out put pi n.

Data Conve rter In te rface serial da ta input pi n.

Data Conve rter In te rface serial da ta output pin.

C1RX

C1TX

C2RX

C2TX

—

CAN1 bus receive pin.

CAN1 bus transmit pin.

CAN2 bus receive pin.

CAN2 bus transmit pin

EMUD

EMUC

EMUD1

EMUC1

EMUD2

EMUC2

EMUD3

EMUC3

I/O

ICD Prim ar y C o mmunica t io n C hannel data input/output pi n.

ICD Primary Communication Channel clock input/output pin.

ICD Secondary Communication Channel data

input/ou tp ut pin.

ICD Seco ndary Com m unicati on Ch annel cloc k i nput/output pi n.

ICD Tertiary Communication Channel data input/output pin.

ICD Tertiar y Communicatio n Channel clock input/ou tput pi n.

ICD Quaternary Communication Channel data

input/ou tp ut pin.

ICD Quat er nary Communicat ion C hannel cl ock input/output pin.

IC1-IC 8 I ST Capture in puts 1 through 8.

INT0

INT1

INT2

INT3

INT4

External interru p t 0.

External interru p t 1.

External interru p t 2.

External interru p t 3.

External interru p t 4.

LVDIN I Analog Low-Voltage Detect Reference Voltage input pin.

MCLR I/P ST Maste r Cl ear (Reset) input or programming vol tage input . Thi s

pin is an active low Reset to the device.

OCFA

OCFB

OC1-OC8

—

Compare Fau lt A i nput (for Compar e ch annels 1, 2, 3 and 4).

Compare Fau lt B i nput (for Compar e ch annels 5, 6, 7 and 8).

Compare outputs 1 throug h 8.

Legend: CMOS = CMOS compatible input or output Analog = Analog input

ST = Schmitt Trigger input with CMOS levels O = Output

I = Input P = Power

dsPIC30F6011/6012/6013/6014

OSC1

OSC2

I/O

ST/CMOS

—

Oscillator cr ysta l input. ST buffer whe n configured i n R C mode;

CMOS ot he rwise.

Oscillat or crystal ou tp ut . Co nnects to crys tal or resonator in

Crystal Oscillator mode. Optionally functions as CLKO in RC

and EC modes.

PGD

PGC I/O

IST

ST In-Circu it Ser ial Pro gr am m i ng data input/outp ut pin.

In-Circu it Seri al Pro gr am m ing clock input pin.

RA6-RA7

RA9-RA10

RA12-RA15

I/O

PORTA is a bidirectional I/O port.

RB0-RB15 I/O ST PORTB is a bidirectional I/O port.

RC1-RC4

RC13-RC15 I/O

I/O ST

ST PORTC is a bidirec tional I/O port.

RD0-RD15 I/O ST PORTD is a bidirectional I/O port.

RF0-R F8 I/O ST PORTF is a bid irec tio nal I/O port.

RG0-RG3

RG6-RG9

RG12-RG15

I/O

PORTG is a bidirec tional I/O port.

SCK1

SDI1

SDO1

SS1

SCK2

SDI2

SDO2

SS2

I/O

—

Synchro nous serial cl ock input/output for SPI1.

SPI1 Data In.

SPI1 Data Out.

SPI1 Slave Sy nchronization .

Synchro nous serial cl ock input/output for SPI2.

SPI2 Data In.

SPI2 Data Out.

SPI2 Slave Sy nchronization .

SCL

SDA I/O

I/O ST

ST Synchronous se rial cl oc k in put/outp ut fo r I2C™.

Synchro nous serial data input / out put for I2C.

SOSCO

SOSCI O

I—

ST/CMOS 32 kHz low power oscillator cryst a l output.

32 kHz low power osc illat or cry stal input. ST buffer when

configur ed i n R C m ode; CMO S otherwise .

T1CK

T2CK

T3CK

T4CK

T5CK

Time r1 ext ernal cloc k input.

Time r2 ext ernal cloc k input.

Time r3 ext ernal cloc k input.

Time r4 ext ernal cloc k input.

Time r5 ext ernal cloc k input.

U1RX

U1TX

U1ARX

U1ATX

U2RX

U2TX

—

UART1 Receive.

UART1 Transmit.

UART1 Altern ate Rec eive.

UART1 Altern ate Transmit .

UART2 Receive.

UART2 Transmit.

VDD P — Positive supply for logic and I/O pins.

VSS P — Ground reference for logic and I/O pins.

VREF+ I Analog Analog Voltage Reference (High) input.

VREF- I Analog Analog Voltage Reference (Low) input.

TABLE 1-1: PINOUT I/O DESCRIPTIONS (CONTINUED)

Pin Name Pin

Type Buffer

Type Description

Legend: CMOS = CMOS compatible input or output Analog = Analog input

ST = Schmitt Trigger input with CMOS levels O = Output

I = Input P = Power

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

2.0 CPU ARCHITECTURE

OVERVIEW

2.1 Core Overview

This section contains a brief overview of the CPU

architecture of the dsPIC30F. For additional hard-

ware and programming information, please refer to

the “dsPIC30F Family Reference Manual” (DS70046)

and the “dsPIC30F/33F Programmer’s Reference

Manual” (DS70157) respectively.

The core has a 24-bit instruction word. The Program

Counter (PC) is 23 bits wide with the Least Significant

bit (LSb) always clear (refer to Section 3.1 “Program

Address Space”), and the Most Significant bit (MSb)

is ignored during norm al prog ram ex ecuti on, ex cept for

certain specialized instructions. Thus, the PC can

address up to 4M instruction words of user program

space. An instruction prefetch mechanism is used to

help maintain throughput. Program loop constructs,

free from loop count management overhead, are sup-

ported using the DO and REPEAT instructions, both of

which are interruptible at any point.

The work ing re giste r array c onsist s o f 16 x 16 -bit re gis-

ters, each of which can act as data, address or offset

registers. One working register (W15) operates as a

software Stack Pointer for interrupts and calls.

The data space is 64 Kbytes (32K words) and is split

into two blocks, referred to as X and Y data memory.

Each block has its own independent Address Genera-

tion Unit (AGU). Most instructions operate solely

through the X memory, AGU, which provides the

appearance of a single unified data space. The

Multiply-Accumulate (MAC) class of dual source DSP

instructions operate through both the X and Y AGUs,

splitting the data address space into two parts (see

Section 3.2 “Data Address Space”). The X and Y

data space boundary is device specific and cannot be

alter ed by the user . Each dat a word consis ts of 2 bytes,

and mos t instruction s can address data eith er as words

or bytes.

There are two methods of accessing data stored in

program memory:

• The upper 32 Kbytes of data space memory can

be mappe d into the lowe r hal f (us er space) of pro-

gram space at any 16K program word boundary,

defined by the 8-bi t Program Sp ace Vis ibility Page

(PSVPAG) register. This lets any instruction

access program space as if it were data space,

with a limitation that the access requires an addi-

tional cycle. More over, only t he lower 16 bits of

each instruction word can be accessed using this

method.

• Linear indirect access of 32K word pages within

progra m spac e is also possibl e using any w orking

Table read and write instructions can be used to

access all 24 bits of an instruction word.

Overhead-free circular buffers (Modulo Addressing)

are supported in both X and Y address spaces. This is

primarily intended to remove the loop overhead for

DSP algorithms.

The X AGU also supports Bit-Reversed Addressing on

dest inatio n ef fectiv e addres ses to great ly simpl ify inp ut

or output data reordering for radix-2 FFT algorithms.

Refer to Section 4.0 “Address Generator Units” for

details on Modulo and Bit-Reversed Addressing.

The core supports Inherent (no operand), Relative,

Literal, Memory Direct, Register Direct, Register

Indirect, Register Offset and Literal Offset Addressing

modes. Instructions are associated with predefined

addressing modes, depending upon their functional

requirements.

For m os t i ns tru c ti o ns , the c or e i s c apa bl e of e xe c ut i ng

a data (or program data) memory read, a working reg-

ister (data) read, a data memory write and a program

(instruction) memory read per instruction cycle. As a

result, 3-operand instructions are supported, allowing

C = A + B operations to be executed in a single cycle.

A DSP engine has been included to significantly

enhance the core arithmetic capab ility and throughput.

It features a high-speed 17-bit by 17-bit multiplier, a

40-bit ALU, two 40-bit saturating accumulators and a

40-bit b idi rec tio nal b arrel shifter. Dat a in th e a cc umul a-

tor or any worki ng r egist er can be shif ted up to 15 bits

right, or 16 bits left in a single cycle. The DSP instruc-

tions ope rate sea mles sly with all other in struct ions an d

have be en desi gned for o ptimal re al-time p erforma nce.

The MAC class of instructions can concurrently fetch

two data operands from memory while multiplying two

W registers. To enable this concurrent fetching of data

operands, the data space has been split for these

instructions and linear for all others. This has been

achiev ed in a tran sp a r en t and fle xib le mann er, by ded-

icating cert ain worki ng registe rs to e ach addre ss spac e

for the MAC class of instructions.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157).

dsPIC30F6011/6012/6013/6014

The core does not support a multi-stage instruction

pipeline. However, a single stage instruction prefetch

mechanism is used, which accesses and partially

decodes instructions a cycle ahead of execution, in

order to maximize available execution time. Most

instructions execute in a single cycle with certain

exceptions.

The core features a vectored exception processing

structure for traps and interrupts, with 62 independent

vectors. The exceptions consist of up to 8 traps (of

which 4 are re served ) a nd 54 interrupts . Ea ch in terru pt

is priorit ized based on a use r assigned prio rity between

1 and 7 (1 being the lowest priority and 7 being the

highest), in conjunction with a predetermined ‘natural

order’. Traps have fixed priorities ranging from 8 to 15.

2.2 Programmer’s Model

The programmer’s model is shown in Figure 2-1 and

consists of 16 x 16-bit working registers (W0 through

W15), 2 x 40-bit accumulators (ACCA and ACCB),

STATUS register (SR), Data Table Page register

(TBLPAG), Program Space Visibility Page register

(PSVPAG), DO and REPEAT registers (DOSTART,

DOEND, DCOUNT and RCOUNT) and Program

Counter (PC). The working registers can act as data,

address or offset registers. All registers are memory

mapped. W0 acts as the W register for file register

addressing.

Some of these registers have a shadow register asso-

ciated with each of them, as shown in Figure 2-1. The

shadow register is used as a temporary h olding register

and can tr ansfer its con tents to or fro m i t s hos t reg is ter

upon the occurrence of an event. None of the shadow

registers are accessible directly. The following rules

apply for transfer of registers into and out of shadows.

•PUSH.S and POP.S

W0, W1, W2, W3, SR (DC, N, OV, Z and C bits

only) are transferred.

•DO instruction

DOSTART, DOEND, DCOUNT shadows are

pushed on loop start, and popped on loop end.

When a byte operation is performed on a working reg-

ister, only the Least Signific ant Byte (LSB) of the t arget

mapped working registers is that both the Least and

Most Significant Bytes can be manipulated through

byte wide data m emory space accesses.

2.2.1 SOFTWARE STACK POINTER/

FRAM E POIN TE R

The dsPIC® DSC devices contain a software stack.

W15 is the dedicated software Stack Pointer (SP), and

will be automatically modified by exception processing

and sub routine calls and return s. However , W15 can be

referenced by any instruction in the same manner as all

other W registers. This simplifies the reading, writing

and manipulation of the Stack Pointer (e.g., creating

stac k fram es ).

W15 is initialized to 0x0800 during a Reset. The user

may reprogram the SP during initialization to any

location within data space.

W14 has been dedicated as a Stack Frame Pointer as

defined by the LNK and ULNK instructions. However,

W14 can be referenced by any instruction in the same

manner as all other W registers.

2.2.2 STATUS REGISTER

The dsPIC DSC core has a 16-bit STATUS register

(SR), the LSB of which is referred to as the SR Low

byte (SRL) an d the Most Signi fic an t Byte (MSB) a s the

SR High byte (SRH). See Figure 2-1 for SR layout.

SRL contains all the MCU ALU operation status flags

(includ ing the Z bit ), as well as the CPU Inter rupt Prior-

ity Level status bits, IPL<2:0> and the Repeat Active

status bit, RA. During exception processing, SRL is

concate na ted with the MSB of the PC to form a

complete word value which is then stacked.

The upper byte of the STATUS register contains the

DSP Adder/Subtracter status bits, the DO Loop Active

bit (DA) and the Digit Carry (DC) status bit.

2.2.3 PROGRAM COUNT ER

The program counter is 23 bits wide; bit 0 is always

clear. Therefore, the PC can address up to 4M

instruction words.

Note: In order to protect against misaligned

stack accesses, W15<0> is always clear.

dsPIC30F6011/6012/6013/6014

FIGURE 2-1 : PROGRAMMER’ S MODEL

TABPAG

PC22 PC0

7 0

D0D15

Program Counter

Data Table Page Address

STATUS Register

Working Registers

DSP Operand

Registers

W10

W11

W12/DSP Offset

W13/DSP Write Back

W14/Frame Pointer

W15/Stack Pointer

DSP Address

Registers

AD39 AD0AD31

DSP

Accumulators ACCA

ACCB

PSVPAG

7 0Program Space Visibility Page Address

OA OB SA SB

RCOUNT

15 0

REPEAT Loop Counter

DCOUNT

15 0

DO Loop Counter

DOSTART

22 0

DO Loop Start Address

IPL2 IPL1

SPLIM Stack Pointer Limit Register

AD15

SRL

PUSH.S Shadow

DO Shadow

OAB SAB

15 0Core Configuration Register

Legend

CORCON

DA DC RA N

TBLPAG

PSVPAG

IPL0 OV

W0/WREG

SRH

DO Loop End Address

DOEND

dsPIC30F6011/6012/6013/6014

2.3 Divide Suppor t

The dsPIC DSC devices feature a 16/16-bit signed

fraction al d iv ide ope rati on , as w ell as 32/1 6-b it a nd 1 6/

16-bit signed and unsigned integer divide operations, in

the form of single instruction iterative divides. The fol-

lowing instructions and data sizes are supported:

1. DIVF - 16/16 signed fract ion al div id e

2. DIV.sd - 32/16 signed divide

3. DIV.ud - 32/16 unsigned divide

4. DIV.sw - 16/16 signed divide

5. DIV.uw - 16/16 unsigned divide

The 16/16 divides are simila r to the 32/16 (same number

of iterations), but the dividend is eithe r zero-extended or

sign-extended during the first iteration.

The divide instructions must be executed within a

REPEAT loop. Any other form of execution (e.g., a

series of discrete divide instructions) will not function

correctly because the instruction flow depends on

RCOUNT. The divide instruction does not automatically

set up the RCOUNT value and it must, therefore, be

explic itly and correctl y specifi ed in the REPEAT instruc-

tion as shown in T able 2-1 (REPEAT will execute the t ar-

get ins truction {o perand va lue + 1} ti mes). The REPEAT

loop count must be setup for 18 iterations of the DIV/

DIVF instruction. Thus, a complete divide operation

requires 19 cycles.

TABLE 2-1: DIVIDE INSTRUCTIONS

Note: The divide flow is interruptible. However,

the user needs to save the context as

appropriate.

Instruction Function

DIVF Signed fractional divide: Wm/Wn → W0; Rem → W1

DIV.sd Signed divide: (Wm + 1:Wm)/Wn → W0; Rem → W1

DIV.ud Unsigned divide: (Wm + 1:Wm/Wn → W0; Rem → W1

DIV.sw Signed divide: Wm/Wn → W0; Rem → W1

DIV.uw Unsigned divide: Wm/Wn → W0; Rem → W1

dsPIC30F6011/6012/6013/6014

2.4 DSP Engine

The DSP engine consists of a high-speed 17-bit x

17-bit multiplier, a barrel shifter and a 40-bit adder/

subtracter (with two target accumulators, round and

saturati on log ic).

The dsPIC30F is a single-cycle instruction flow archi-

tecture, therefore, concurrent operation of the DSP

engine with MCU instruction flow is not possible.

However, some MCU ALU and DSP engine resources

may be used concurrently by the same in struction (e.g.,

ED, EDAC).

The DSP engine also has the capability to perform

inherent accumulator-to-accumulator operations,

which require no additional d ata. These in structions are

ADD, SUB and NEG.

The DSP engine has various options selected through

various bits in the CPU Core Configuration register

(CORCON), as listed below:

1. Fractional or integer DSP multiply (IF).

2. Signed or unsigned DSP multiply (US).

3. Conventional or convergent rounding (RND).

4. Automatic saturation on/off for ACCA (SATA).

5. Automatic saturation on/off for ACCB (SATB).

6. Automatic saturation on/off for writes to data

memory (SATDW).

7. Accumulator Saturation mode selection

(ACCSAT).

A block diagram of the DSP engine is shown in

Figure 2-2.

Note: For CORCON layout, see Table 3-3.

TABLE 2-2: DSP INSTRUCTIONS SUMMARY

Instruction Algebraic Operation ACC WB?

CLR A = 0 Yes

ED A = (x – y)2No

EDAC A = A + (x – y)2No

MAC A = A + (x * y) Yes

MAC A = A + x2No

MOVSAC No change in A Yes

MPY A = x * y No

MPY.N A = – x * y No

MSC A = A – x * y Yes

dsPIC30F6011/6012/6013/6014

FIGURE 2-2: DSP ENGINE BLOCK DIAGRAM

Zero Backfill

Sign-Extend

Barrel

Shifter

40-bit Accumula tor A

40-bit Accumula tor B Round

Logic

X Data Bus

To/From W Array

Adder

Saturate

Negate

16 16

40 40

Y Data Bus

Carry/Borrow Out

Carry/Borrow In

Multiplier/Scaler

17-bit

dsPIC30F6011/6012/6013/6014

2.4.1 MULTIPLIER

The 17 x 17-bit multiplier is capable of signed or

unsign ed ope ration an d can m ultiplex its output u sing a

scaler to support either 1.31 fractional (Q31) or 32-bit

integer results. Unsigned operands are zero-extended

into the 17th bit of the multiplier input value. Signed

operands are sign-exten ded into the 17th bit of the mul-

tiplier input value. The output of the 17 x 17-bit multi-

plier/scaler is a 33-bit value which is sign-extended to

40 bits. Integer data is inherently represented as a

signed two’s complement value, where the MSB is

defined as a sign bit. Generally speaking, the range of

an N-bit two’s complement integer is -2N-1 to 2N-1 – 1.

For a 16-bit integer, the data range is -32768 (0x8000)

to 32767 (0x7FFF) including ‘0’. For a 32-bit integer,

the data range is -2,147,483,648 (0x8000 0000) to

2,147,483,645 (0x7FFF FFFF).

When the multiplier is configured for fractional multipli-

cation, the data is represented as a two’s complement

fraction , where the M SB is define d as a sign b it and the

radix po int is im plied to lie just a fter the si gn bit (QX f or-

mat). The range of an N-bit two’s complement fraction

with this implied radix point is -1.0 to (1 – 21-N). For a

16-bit fraction, the Q15 data range is -1.0 (0x8000) to

0.999969482 (0x7FFF) including ‘0’ and has a preci-

sion of 3.01518x10-5. In Fractional mode, the 16x16

multiply operation generates a 1.31 product which has

a precision of 4.65661 x 10-10.

The same multiplier is used to support the MCU multi-

ply instructions which include integer 16-bit signed,

unsigned and mixed sign multiplies.

The MUL instruction may be directed to use byte or

word size d opera nds. By te opera nds wil l direct a 1 6-bit

result, and word operands will direct a 32-bit result to

the specified register(s) in the W array.

2.4.2 DATA ACCUMULATORS AND

ADDER/SUBTRACTER

The data accumulator consists of a 40-bit adder/

subtracter with automatic sign extension logic. It can

select one of two accumulators (A or B) as its pre-

accumulation source and post-accumulation destina-

tion. For the ADD and LAC instructions, the data to be

accum ulated or l oaded ca n be optio nally sca led via th e

barrel shifter, prior to accumulation.

2.4.2.1 Adder/Subtracter, Overflow and

Saturation

The adder/subtracter is a 40-bit adder with an optional

zero inpu t into on e side a nd eithe r true , or comp leme nt

data into the other input. In the case of addition, the

carry/borrow input is active high and the other input is

true data (not complemented), whereas in the case of

subtrac tion, the carry/borrow input is active low and the

other input is complemented. The adder/subtracter

generates overflow status bits SA/SB and OA/OB,

which are latched and reflected in the STATUS

• Overflow from bit 39: this is a catastrophic

overflow in which the sign of the accumulator is

destroyed.

• Overflow into guard bits 32 through 39: this is a

recoverable overflow. This bit is set whenever all

the guard bits bits are not identical to each other.

The adder has an additional saturation block which

controls accumulator data saturation, if selected. It

uses the result of the adder, the overflow status bits

described above, and the SATA/B (CORCON<7:6>)

and ACCSAT (CORCON<4>) mode control bits to

determine when and to what value to saturate.

Six STATUS register bits have been provided to

support saturation and overflow; they are:

1. OA:

ACCA overflowed into guard bits

2. OB:

ACCB overflowed into guard bits

3. SA:

ACCA saturated (bit 31 overflo w and saturatio n)

ACCA overflowed into guard bits and saturated

(bit 39 over flow and saturation)

4. SB:

ACCB saturated (bit 31 overflo w and saturatio n)

ACCB overflowed into guard bits and saturated

(bit 39 over flow and saturation)

5. OAB:

Logical OR of OA and OB

6. SAB:

Logical OR of SA and SB

The OA and OB bits are modified each time data

passes through the adder/subtracter. When set, they

indicate that the most recent operation has overflowed

into the accumulator guard bits (bits 32 through 39).

The OA and OB bits can also optionally generate an

arithmetic warning trap when set and the correspond-

ing overflow trap flag enable bit (OVATE, OVBTE) in

the INTCON1 register (refer to Section 5.0 “Inter-

rupts”) is set. This allows the user to take immediate

action, for example, to correct system gain.

dsPIC30F6011/6012/6013/6014

The SA and SB bits are modified each time data

passes through the adder/subtracter but can only be

cleared by the user. When set, they indicate that the

accumula tor has overfl owed it s m aximum range (b it 31

for 32-bit saturation, or bit 39 for 40-bit saturation) and

will be saturated (if saturation is enabled). When satu-

ration is not en ab led , SA and SB default to bit 39 over-

flow an d th us in di ca te th at a c ata str o ph ic ov erf l ow h as

occu rred. If the COV TE bit in the INTCO N1 reg ister is

set, SA an d SB bit s wil l generate an ari thmeti c warnin g

trap when saturation is disabled.

The overflow and saturation status bits can optionally

be viewed in the STATUS register (SR) as the logical

OR of OA an d OB (in bit OAB) and the logical OR of SA

and SB (in bit SAB). Th is allows programm ers to check

one bit in the STATUS register to determine if either

accumulator has overflowed, or one bit to determine if

either a ccum ulator has satu rated. T his w ould be usefu l

for complex number arithmetic which typically uses

both the accu mulators.

The device supports three saturation and overflow

modes:

1. Bit 39 Overflow and Saturation:

When bit 39 overflow and saturation occurs, the

saturation logic load s the maximally positive 9.31

(0x7FFFFFFFFF), or maximally negative 9.31

value (0x8000000000) into the target accumula-

tor. The SA or SB bit is set and remains set until

cleared by the user. This is referred to as ‘super

saturation’ and provides protection against erro-

neous data, or unexpected algorithm problems

(e.g., gain calculations).

2. Bit 31 Overflow and Saturation:

When bit 31 overflow and saturation occurs, the

saturation logic then loads the maximally posi-

tive 1.31 value (0x007FFFFFFF), or maximally

negative 1.31 value (0x0080000000) into the

target accumulator. The SA or SB bit is set and

remains set until cleared by the user. When this

Saturation mode is in effect, the guard bits are

not used (so the OA, OB or OAB bits are never

set).

3. Bit 39 Catastrophic Overflow:

The bit 39 overflow status bit from the adder is

used to set the SA or SB bit which remain set

until cleared by the user. No saturation opera-

tion is performed and the accumulator is allowed

to overflow (destroying its sign). If the COVTE

bit in the INTCON1 register i s set, a cat astrophic

ove rflow can initiate a trap exception.

2.4.2.2 Accumulator ‘Write Back’

The MAC class of instructions (with the exception of

MPY, MPY.N, ED and EDAC) can optionally write a

rounded version of the high word (bits 31 through 16)

of the accumulator that is not t argeted by the instruction

into dat a spac e memory. The wri te is performe d across

the X bus into combined X and Y address space. The

following addressing modes are supported:

1. W13, Re gi ste r Dire ct:

The rounded contents of the non-target

accumulator are written into W13 as a 1.15

fraction.

2. [W13] + = 2, Register Indirect with

Post-Increment:

The round ed contents of the non- target accumu-

lator are written into the address pointed to by

W13 as a 1.15 fraction. W13 is then

incremented by 2 (fo r a wo rd wr ite).

2.4.2.3 Round Logic

The round logic is a combinational block which per-

forms a conventional (biased) or convergent (unbi-

ased) round function during an accumulator write

(store). The Round mode is determined by the state of

the RND bit in the CORCON register . It generates a 16-

bit, 1.15 data value which is passed to the data space

write satura tion logic . If rounding is not indica ted by the

instruction, a truncated 1.15 data value is stored and

the least significant word (lsw) is simply discarded.

Conventional rounding takes bit 15 of the accumulator,

zero-extends it and ad ds it to the AC CxH word (bi t s 16

through 31 of the accumulator). If the ACCxL word

(bits 0 through 15 of the accumulator) is between

0x8000 and 0xFFFF (0x8000 included), ACCxH is

incremented. If ACCxL is between 0x0000 and

0x7FFF, ACCxH is left unchanged. A consequence of

this algorithm is that over a succession of random

rounding operations, the value will tend to be biased

slightly positive.

Convergent (or unbiased) rounding operates in the

same manner as conventional rounding, except when

ACCxL equals 0x8000. If this is the case, the LSb

(bit 16 of the accumulator) of ACCxH is examined. If it

is ‘1’, ACCxH is incremented. If it is ‘0’, ACCxH is not

modif ied . Assu min g th at bit 16 is effec tive ly ra ndom in

nature, th is s c hem e w i ll re mo ve any rou ndi ng b ias th at

may accumulate .

The SAC and SAC.R instructions store either a trun-

cated (SAC) or rounded (SAC.R) version of the cont ents

of th e ta rget ac cumu lator t o d ata memo ry vi a th e X bu s

(subject to data saturation, see Section 2.4.2.4 “Data

Space Write Saturation”). Note that for the MAC cl as s

of instructions, the accumulator write back operation

will fu nction in t he same ma nner , a ddressing combine d

MCU (X and Y) data space though the X bus. For this

class of instructions, the data is always subject to

rounding.

dsPIC30F6011/6012/6013/6014

2.4.2.4 Data Space Write Saturation

In addition to adder/subtracter saturation, write s to data

space may also be saturated but without affecting the

contents of the source accumulator. The data space

write saturation logic block accepts a 16-bit, 1.15 frac-

tional value from the round logic block as its input,

together with overflow status from the original source

(accumulator) and the 16-bit round adder. These are

combined and used to select the appropriate 1.15

fractional value as output to write to data space

memory.

If the SATDW bit in the CORCON register is set, data

(after roundi ng or trun ca tio n) is tes te d for ove rflo w and

adjusted accordingly, For input data greater than

0x007FF F, dat a written to me mory is forced to the max-

imum posit ive 1. 15 val ue, 0x7FFF. F or inp ut da ta less

than 0x FF8000, dat a wri tten to memo ry is f orced to the

maximum negative 1.15 value, 0x8000. The MSb of the

source (bit 39) is used to determine the sign of the

operand bei ng tes ted.

If the SATDW bit in the CORCON regis ter is not set , the

input data is always passed through unmodified under

all con dit ion s.

2.4.3 BARREL SHIFTER

The barrel shifter is capable of performing up to 16-bit

arithmetic or logic right shifts, or up to 16-bit left shifts

in a single cycle. The source can be either of the two

DSP accumulators, or the X bus (to support multi-bit

shifts of register or memory data).

The sh ifter requires a s ign ed bi nary v al ue to de term in e

both the m agnitude (number of bits) and direction of the

shift operation. A positive value will shift the operand

right. A negative value will shift the operand left. A

value of ‘0’ will not modify the operand.

The barrel shifter is 40 bits wide, thereby obtaining a

40-bit res ult for DSP shift ope rations an d a 16-bit resu lt

for MCU shift operations. Data from the X bus is pre-

sented to the barrel shifter between bit positions 16 to

31 for right sh ifts, and bit positio ns 0 to 16 for left sh ifts.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

3.0 MEMORY ORGANIZATION

3.1 Program Address Space

The program address space is 4M instruction words. It

is addressable by a 24-bit value from either the 23-bit

PC, table instruction Effective Address (EA), or data

space EA, when program space is mapped into data

space as defined by Table 3-1. Note that the program

spa ce add ress i s increm ented b y tw o betwee n suc ces-

sive program words in order to provide compatibility

with data space addressing.

User program space access is restricted to the lower

4M instruction word address range (0x000000 to

0x7FFFFE) for al l acces se s other than TBLRD/TBLWT,

which use TBLPAG<7> to deter mine user or c onfigura-

tion space access. In Table 3-1, Program Space

Address Construction, bit 23 allows access to the

Device ID, the User ID and the Configuration bits.

Otherwise, bit 23 is always clear.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157). Note: The ad dress map show n in Figure 3-1 an d

Figure 3-2 is conceptual, and the actual

memory configuration may vary across

individual devices depending on available

memory.

dsPIC30F6011/6012/6013/6014

FIGURE 3-1:

PROGRAM SPACE MEMORY

MAP FOR dsPIC30F601 1/6013

FIGURE 3-2:

PROGRAM SPACE MEMORY

MAP FOR dsPIC30F6012/6014

Reset - Target Address

User Memory

Space

000000

00007E

000002

000080

Device Configuration

User Flash

Program Memory

016000

015FFE

Configuration Memory

Space

Data EEPROM

(44K instructions)

(2 Kbytes)

800000

F80000

Registers F8000E

F80010

DEVID (2) FEFFFE

FF0000

FFFFFE

Reserved F7FFFE

Reserved

7FF800

7FF7FE

(Read ‘0’s)

8005FE

800600

UNITID (32 instr.)

Vector Tables

8005BE

8005C0

Reset - GOTO Instruction

000004

Reserved

7FFFFE

Reserved

000100

0000FE

000084

Alternate Vector Table

Reserved

Interru pt Vector Table

Reset - Target Address

User Memory

Space

000000

00007E

000002

000080

Device Configuration

User Flash

Progra m Mem ory

018000

017FFE

Configuration Memory

Space

Data EEPROM

(48K instructions)

(4 Kbytes)

800000

F80000

Registers F8000E

F80010

DEVID (2) FEFFFE

FF0000

FFFFFE

Reserved F7FFFE

Reserved

7FF000

7FEFFE

(Read ‘0’s)

8005FE

800600

UNITID (32 instr.)

Vector Tables

8005BE

8005C0

Reset - GOTO Instruction

000004

Reserved

7FFFFE

Reserved

000100

0000FE

000084

Al ternate Vector Table

Reserved

Interrupt Ve ctor Table

dsPIC30F6011/6012/6013/6014

TABLE 3-1: PROGRAM SPACE ADDRESS CONSTRUCTION

FIGURE 3-3: DATA ACCESS FROM PROGRAM SPACE ADDRESS GENERATION

Access Type Access

Space Program Space Address

<23> <22:16> <15> <14:1> <0>

Instruction Access User 0PC<22:1> 0

TBLRD/TBLWT User

(TBLPAG<7> = 0)TBLPAG<7:0> Data EA<15:0>

TBLRD/TBLWT Configuration

(TBLPAG<7> = 1)TBLPAG<7:0> Data EA<15:0>

Program Space Visibility User 0PSVPAG<7:0> Data EA<14:0>

0Program Counter

23 bits

PSVPAG Reg

8 bits

15 bits

Program

Using

Select

TBLPAG Reg

8 bits

16 b i ts

Using

Byte

24-bit EA

1/0

Select

User/

Configuration

Table

Instruction

Program

Space

Counter

Using

Space

Select

Visibility

Note: Program space visibility cannot be used to access bits <23:16> of a word in program memory.

dsPIC30F6011/6012/6013/6014

3.1.1 DATA ACCESS FROM PROGRAM

MEMORY USING TABLE

INSTRUCTIONS

This arc hit ec ture f etc hes 24 -bi t w ide pro gram memo ry.

Consequently, instructions are always aligned.

However, as the architecture is modified Harvard, data

can also be present in program space.

There are two methods by which program space can

be accessed: via special table instructions, or through

the rema ppi ng of a 16K w ord prog ram space page into

the u pp e r half o f da ta space (s ee Section 3.1.2 “Data

Access From Program Memory using Program

Space Visibility”). The TBLRDL and TBLWTL instruc-

tions of fer a direct method of reading or writing the least

significant word of any address within program space,

without going through data space. The TBLRDH and

TBLWTH instructions are the only method whereby the

upper 8 bit s o f a pro gram s pa ce word can be acc esse d

as data.

The PC is incremented by two for each successive

24-bit program word. This allows program memory

addresses to directly map to data space addresses.

Program memory can thus be regarded as two 16-bit

word wide address sp aces , res id ing side by si de, eac h

with the same address range. TBLRDL and TBLWTL

access the space which contains the least significant

data word, and TBLRDH and TBLWTH ac cess the sp ace

which contains the Most Significant Data Byte.

Figure 3-3 shows how the EA is created fo r t a ble op er-

ations and data space accesses (PSV = 1). Here,

P<23:0> refers to a program space word, whereas

D<15:0> refers to a data space word.

A set of t able inst ruc tion s a r e p rov ide d t o m ov e by te or

word sized data to and from program space.

1. TBLRDL: Table Read Low

Word: Read the lsw of the program address;

P<15:0> maps to D<15:0>.

Byte: Read one of the LSBs of the program

address;

P<7:0> maps to the destination byte when byte

select = 0;

P<15:8> m aps to the d estination byte when byte

select = 1.

2. TBLWTL: Ta ble Write Lo w (ref er t o Section 6.0

“Flash Program Memory” for details on Flash

Programming)

3. TBLRDH: Table Read High

Word: Read the Most Significant Word of the pro-

gram address; P<23:16> maps to D<7:0>;

D<15:8> will always be = 0.

Byte: Read one of the MSBs of the program

address;

P<23:16> maps to the destination byte when

byte select = 0;

The destination byte will always be = 0 when

byte select = 1.

4. TBLWTH: Table Wr i te High (refer to Section 6.0

“Flash Program Memory” for details on Flash

Programming)

FIGURE 3-4: PROGRAM DATA TABLE ACCESS (LEAST SIGNIFICANT WORD)

PC Address

0x000000

0x000002

0x000004

0x000006

00000000

Program Memory

‘Phantom’ Byte

(read as ‘0’)

TBLRDL.W

TBLRDL.B (Wn<0> = 1)

TBLRDL.B (Wn<0> = 0)

dsPIC30F6011/6012/6013/6014

FIGURE 3-5: PROGRAM DATA TABLE ACCESS (MOST SIGNIFICANT BYTE)

3.1.2 DATA ACCESS FROM PROGRAM

MEMORY USING PROGRAM

SPACE VISIBILITY

The upper 32 Kbytes of data space may optionally be

mapped into any 16K word program space page. This

provides transparent access of stored constant data

from X data space without the need to use special

instruc tio ns (i.e ., TBLRDL/H, TBLWTL/H ins tru cti ons).

Program space access through the data space occurs

if the MSb of the data space EA is set and program

space visibility is enabled by setting the PSV bit in the

Core Control register (CORCON). The functions of

CORCON are discussed in Section 2.4 “DSP

Engine”.

Data accesses to this area add an additional cycle to

the instruction being executed, since two program

memory fetch es are requ ire d.

Note that the upper half of addressable data space is

always part of the X data space. Therefore, when a

DSP ope ration uses p rogram sp ace mapp ing to acces s

this m em ory regi on , Y d ata sp ac e s ho uld typical ly co n-

tain state (variable) data for DSP operations, whereas

X data space should typically contain coefficient

(constant) da ta.

Although each dat a sp ace address, 0x8000 and higher ,

maps directly into a corresponding program memory

address (see Figure 3-6), only the lower 16 bits of the

24-bit program word are used to contain the data. The

upper 8 bits shoul d be progra mmed to forc e an illeg al

instruction to maintain machine robustness. Refer to

the “dsPIC30F/33F Programmer ’s Reference Manual”

(DS70157) for details on instruction encoding.

Note that by incrementing the PC by 2 for each

program memory word, the Least Significant 15 bits of

data space addresses directly map to the Least Signif-

icant 15 bits in the corresponding program space

address es. The remainin g bits are prov ided by the Pro-

gram Sp ace V is ibilit y Page regi ster, PSVPAG<7:0>, as

shown in Figure 3-6.

For instructions that use PSV which are executed

outside a REPEAT loop:

• The following instructions will require one

ins truction cycle in addition to the speci fied

execution time:

-MAC class of instructions with data operand

prefetch

-MOV instr ucti ons

-MOV.D instructions

• All other instructions will require two instruction

cycl es in addition to th e specified execution time

of the instruction.

For instructions that use PSV which are executed

inside a REPEAT loop:

• The follo wing inst ances will re quire two ins truction

cycl es in addition to th e specified execution time

of the instruction:

- Execution in the first iteration

- Execution in the last iteration

- Execution prior to exiting the loop due to an

interrupt

- Execution upon re-entering the loop after an

interr upt is servi ced

• Any other iteration of the REPEAT loop will allow

the instruction accessing data, using PSV, to

execute in a single cycle.

PC Address

0x000000

0x000002

0x000004

0x000006

00000000

Program Memory

‘Phantom’ Byte

(read as ‘0’)

TBLRDH.W

TBLRDH.B (Wn<0> = 1)

TBLRDH.B (Wn<0> = 0)

Note: PSV acc ess is tempo raril y disabl ed durin g

table reads/wr ites.

dsPIC30F6011/6012/6013/6014

FIGURE 3-6: DATA S PACE WINDOW INTO PROGRAM SPACE OPERATION

23 15 0

PSVPAG(1)

EA<15> =

EA<15> = 1

Data

Space

Data Space

Program Space

15 23

0x0000

0x8000

0xFFFF

0x01

0x000100

0x017FFF

Data Read

Upper Half of Dat a

Space is Mapped

into Program Space

0x008000

Address

Concatenation

BSET CORCON,#2 ; PSV bit set

MOV #0x01, W0 ; Set PSVPAG register

MOV W0, PSVPAG

MOV 0x8000, W0 ; Access program memory location

; using a data space access

Note: PSVPAG is an 8-bit register, containing bits <22:15> of the program space address (i.e., it defines

the page in program space to which the upper half of data space is being mapped).

dsPIC30F6011/6012/6013/6014

3.2 Data Address Space

The core has two data spaces. The data spaces can be

considered either separate (for some DSP instruc-

tions), o r as o ne u nified linear a ddre ss ran ge (fo r MC U

instruc tions). The dat a spaces are acces s ed usi ng two

Address Generation Units (AGUs) and separate data

paths.

3.2.1 DATA SPACE MEMORY MAP

The data space memory is split into two blocks, X and

Y data space. A key ele me nt of th is archi tec tur e is th at

Y space is a subset of X space, and is fully contained

within X space. In order to provide an apparent linear

addressing space, X and Y spaces have contiguous

addresses.

When executing any instruction other than one of the

MAC class of instructions, the X block consists of the 64-

Kbyte data address space (including all Y addresses).

When executing one of the MAC class of instructions,

the X block consists of the 64-Kbyte data address

space excluding the Y address block (for data reads

only). In other words, all other instructions regard the

entire data memory as one composite address space.

The MAC class instruc tions ext ract the Y address spac e

from data space and address it using EAs sourced from

W10 and W11. The remaining X data space is

address ed using W8 a nd W9. Both addre ss space s are

concurrently accessed only with the MAC class

instructions.

The dat a sp ace mem ory ma ps are sh own in Figu re 3-8

and Figure 3-9.

3.2.2 DATA SPACES

The X data space is used by all instructions and sup-

ports all addressing modes. There are separate read

and write data buse s. The X read data bus is the return

data path for all instructions that view data space as

combined X and Y address space. It is also the X

address space data path for the dual operand read

instructions (MAC class). The X write data bus is the

only write path to data space for all instructions.

The X data space also supports Modulo Addressing for

all instructions, subject to addressing mode restric-

tions. Bit-Reversed Addressing is only supported for

writes to X data space.

The Y data space is used in concert with the X data

space by the MAC class of instructions (CLR, ED,

EDAC, MAC, MOVSAC, MPY, MPY.N and MSC) to

provide two concurrent data read paths. No writes

occur ac ros s th e Y bu s. T his cl as s of ins truc tio ns ded i-

cates two W r egister pointers, W10 and W1 1, to al ways

address Y data space, independent of X data space,

whereas W8 and W9 always address X data space.

Note that during accumulator write back, the data

address sp a ce is c onsidered a co mb in ation of X and Y

data spaces, so the write occurs across the X bus.

Consequently, the write can be to any address in the

entire data space.

The Y data space can only be used for the data

prefetch operation associated with the MAC class of

instructions. It also supports Modulo Addressing for

automat ed c irc ula r buffers. O f c ourse, a ll other instruc -

tions can access the Y dat a address sp ace through the

X data path as part of the composite linear space.

The boundary between the X and Y data spaces is

defined as shown in Figure 3-8 and Figure 3-8 and is

not user programmable. Should an EA point to data

outside its own assigned address space, or to a loca-

tion outside p hysi cal mem ory, an all zero wo rd/byte wil l

be returne d. For exam ple, althou gh Y address spac e is

visible by all non-MAC instructions using any address-

ing mode , an attem pt by a MAC ins tructi on to fetc h dat a

from tha t sp ace u sing W8 or W 9 (X sp ace poin ters) wil l

return 0x0000.

dsPIC30F6011/6012/6013/6014

FIGURE 3 -7: DATA SPACE MEMORY MAP FOR dsPIC30F6011/6013

0x0000

0x07FE

0xFFFE

LSB

Address

16 bit s

LSBMSB

MSB

Address

0x0001

0x07FF

0xFFFF

0x8001 0x8000

Optionally

Mapped

into Program

Memory

0x1FFF 0x1FFE

0x20000x2001

0x0801 0x0800

0x1801 0x1800

Near

Data

0x17FE 0x17FF

2 Kbyt e

SFR Space

6 Kbyte

SRAM Space

8 Kbyt e

Space

SFR Space

X Data RAM (X)

X Data

Unimplemented (X)

Y Data RAM (Y)

dsPIC30F6011/6012/6013/6014

FIGURE 3-8: DATA SPACE MEMORY MAP FOR dsPIC30F6012/6014

0x0000

0x07FE

0x17FE

0xFFFE

LSB

Address

16 bit s

LSBMSB

MSB

Address

0x0001

0x07FF

0x17FF

0xFFFF

0x8001 0x8000

Optionally

Mapped

into Program

Memory

0x27FF 0x27FE

0x28000x2801

0x0801 0x0800

0x1801 0x1800

Near

Data

0x1FFE 0x1FFF

2 Kbyt e

SFR Space

8 Kbyte

SRAM Space

8 Kbyt e

Space

SFR Space

X Data RAM (X)

X Data

Unimplemented (X)

Y Data RAM (Y)

dsPIC30F6011/6012/6013/6014

FIGURE 3-9: DATA SPACE FOR MCU AND DSP (MAC CLASS) INSTRUCTIONS EXAMPLE

TABLE 3-2: EFFECT OF INVALID

MEMORY ACCESSES

All effective addresses are 16 bits wide and point to

bytes within the data space. Therefore, the data space

address range is 64 Kbytes or 32K words.

3.2.3 DATA SPACE WIDTH

The core data width is 16 bits. All internal registers are

organ ized as 16-bit wide words. Dat a sp ac e mem ory is

organized in byte addressable, 16-bit wide blocks.

3.2.4 DATA AL IGNMENT

To help maintain backward compatibility with PIC®

MCU devices and improve data space memory usage

efficiency, the dsPIC30F instruction set supports both

word and byte operation s. Data is al igned in dat a mem-

ory and registers as words, but all data space EAs

resolve to bytes. Data byte re ads will rea d the comp lete

word whic h co ntains the byt e, us ing the L Sb of an y EA

to determine which byte to select. The selected byte is

placed onto the LSB of the X data path (no byte

acces ses are possible fro m the Y data pa th as the MAC

class of instruction can only fetch words). That is, data

memory and registers are organized as two parallel

byte wide entities with shared (word) address decode

but separate write lines. Data byte writes only write to

the corresponding side of the array or register which

matches the byte address.

As a conse quence of this byte access ibility, all ef fective

address c alc ul atio ns (in cl udi ng tho se ge nera ted by th e

DSP operations which are restricted to word sized

data) a re inter nally scale d to step thro ugh word ali gned

memory. For example, the core would recognize that

Post-Modified Register Indirect Addressing mode

[Ws++] will result in a value of Ws + 1 for byte

operations and Ws + 2 for word operations.

SFR SPACE

(Y SPACE)

X SPACE

SFR SPACE

UNUSED

X SPACE

Y SPACE

UNUSED

Non-MAC Class Ops (Read) MAC Class Ops (Read)

Indirect EA from any W Indirect EA from W8, W9 Indirect EA from W10, W11

Attempted Operatio n D ata Returned

EA = an unimplemented address 0x0000

W8 or W9 used to access Y data

spa ce in a MAC instru ction 0x0000

W10 or W11 used to access X

data space in a MAC instruction 0x0000

dsPIC30F6011/6012/6013/6014

All wo rd accesses must be aligned to an eve n address .

Misaligned word data fetches are not supported so

care must be taken when mixing byte and word opera-

tions, or translating from 8-bit MCU code. Should a mis-

aligned read or write be attempted, an address error

trap wil l be ge ner ated . I f th e er ror oc curre d o n a read ,

the instruction underway is completed, whereas if it

occurre d on a write, the ins truction w ill be execu ted but

the write will not occur. In either case, a trap will then

be exec uted, a llow ing the syst em and /or use r to exam-

ine the machine state prior to execution of the address

fault.

FIGURE 3-1 0 : DATA ALIGNMENT

All byte loads into any W register are loaded into the

LSB. The MSB is not modified.

A sign-extend (SE) instruction is provided to allow

users to translate 8-bit signed data to 16-bit signed

values. Alternatively, for 16-bit unsigned data, users

can clear the MSB of any W register by executing a

zero-extend (ZE) instruction on the appropriate

address.

Although m os t i ns truc tio ns are cap able of op era t ing o n

word or byte data sizes, it should be noted that some

instructions, including the DSP instructions, operate

only on words .

3.2.5 NEAR DATA SPACE

An 8-Kbyte ‘near’ data space is reserved in X address

memory space between 0x0000 and 0x1FFF, which is

directly add res sab le via a 13-bit absolut e address field

within all memory direct instructions. The remaining X

address space and all of the Y address space is

address able indirec tly. Additional ly, the whole of X da ta

space is addressable using MOV instructions, which

support memory direct addressing with a 16-bit

address field.

3.2.6 SOFTWARE STACK

The dsPI C DSC de vices c ontai n a softwa re st ack. W1 5

is used as the Stack Pointer.

The Stack Pointer always points to the first available

free word and grows from lower addresses towards

higher ad dresses. It pre-decrement s for stack pop s and

post-increments for stack pushes as shown in Figure 3-

11. Note that for a PC push during any CALL instruc-

tion, the MSB of the PC is zero-extended before the

push, ensuring that the MSB is always clear.

There is a Stack Pointer Limit register (SPLIM) associ-

ated with the Stack Pointer. SPLIM is uninitialized at

Reset. As is t he case f or t h e Stack Point er, SPL IM < 0>

is forced to ‘0’ because all stack operations must be

word aligned. Whenever an Effective Address (EA) is

generated using W15 as a source or destination

pointer, the address thus generated is compared with

the valu e i n SPL IM. If the cont ents of the Stack Po int er

(W15) and the SPLIM register are equal and a push

operatio n is perform ed, a st ack error trap will no t occur.

The stack error trap will occur on a subsequent push

operation. Thus, for example, if it is desirable to cause

a stack error trap when the stack grows beyond

address 0x2000 in RAM, initialize the SPLIM with the

value, 0x1FFE.

Similarl y, a S t ack Po inter u nderf low ( stack error) tra p is

generated when the Stack Pointer address is found to

be less than 0x0800, thus preventing the stack from

interfering with the Special Function Register (SFR)

space.

A write to the SPLIM register should not be immediately

follow ed by an ind irec t read ope rati on usi ng W15.

FIGURE 3-1 1: CALL STACK FRAME

15 8 7 0

0001

0003

0005

0000

0002

0004

Byte1 Byte 0

Byte3 Byte 2

Byte5 Byte 4

LSBMSB

Note: A PC push during exception processing

will concatenate the SRL register to the

MSB of the PC prior to the push.

PC<15:0>

000000000

015

W15 (before CALL)

W15 (after CALL)

Stack Grows Toward s

Higher Address

0x0000

PC<22:16>

POP : [--W15]

PUSH : [W15++]

dsPIC30F6011/6012/6013/6014

TABLE 3-3: CORE REGISTER MAP

SFR Name Address

(Home) Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

W0 0000 W0 / WREG 0000 0000 0000 0000

W1 0002 W1 0000 0000 0000 0000

W2 0004 W2 0000 0000 0000 0000

W3 0006 W3 0000 0000 0000 0000

W4 0008 W4 0000 0000 0000 0000

W5 000A W5 0000 0000 0000 0000

W6 000C W6 0000 0000 0000 0000

W7 000E W7 0000 0000 0000 0000

W8 0010 W8 0000 0000 0000 0000

W9 0012 W9 0000 0000 0000 0000

W10 0014 W10 0000 0000 0000 0000

W11 0016 W11 0000 0000 0000 0000

W12 0018 W12 0000 0000 0000 0000

W13 001A W13 0000 0000 0000 0000

W14 001C W14 0000 0000 0000 0000

W15 001E W15 0000 1000 0000 0000

SPLIM 0020 SPLIM 0000 0000 0000 0000

ACCAL 0022 ACCAL 0000 0000 0000 0000

ACCAH 0024 ACCAH 0000 0000 0000 0000

ACCAU 0026 Sign-Extension (ACCA<39>) ACCAU 0000 0000 0000 0000

ACCBL 0028 ACCBL 0000 0000 0000 0000

ACCBH 002A ACCBH 0000 0000 0000 0000

ACCBU 002C Sig n-Extensio n (ACCB<39>) ACCBU 0000 0000 0000 0000

PCL 002E PCL 0000 0000 0000 0000

PCH 0030 — — — — — — — — —PCH0000 0000 0000 0000

TBLPAG 0032 — — — — — — — —TBLPAG0000 0000 0000 0000

PSVPAG 0034 — — — — — — — — PSVPAG 0000 0000 0000 0000

RCOUNT 0036 RCOUNT uuuu uuuu uuuu uuuu

DCOUNT 0038 DCOUNT uuuu uuuu uuuu uuuu

DOSTARTL 003A DOSTARTL 0uuuu uuuu uuuu uuu0

DOSTARTH 003C — — — — — — — — —DOSTARTH0000 0000 0uuu uuuu

DOENDL 003E DOENDL 0uuuu uuuu uuuu uuu0

DOENDH 0040 — — — — — — — — — DOENDH 0000 0000 0uuu uuuu

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

SR 0042 OA OB SA SB OAB SAB DA DC IPL2 IPL1 IPL0 RA N OV Z C 0000 0000 0000 0000

CORCON 0044 — — — US EDT DL2 DL1 DL0 SATA SATB SATDW ACCSAT IPL3 PSV RND IF 0000 0000 0010 0000

MODCON 0046 XMODEN YMODEN —— BWM<3:0> YWM<3:0> XWM<3:0> 0000 0000 0000 0000

XMODSRT 0048 XS<15:1> 0 uuuu uuuu uuuu uuu0

XMODEND 004A XE<15:1> 1 uuuu uuuu uuuu uuu1

YMODSRT 004C YS<15:1> 0 uuuu uuuu uuuu uuu0

YMODEND 004E YE<15:1> 1 uuuu uuuu uuuu uuu1

XBREV 0050 BREN XB<14:0> uuuu uuuu uuuu uuuu

DISICNT 0052 —— DISICNT<13:0> 0000 0000 0000 0000

TABLE 3-3: CORE REGISTER MAP (CONTINUED )

SFR Name Address

(Home) Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

4.0 ADDRESS GENERATOR UNITS

The dsPIC DSC core contains two independent

address generator un its: the X AGU and Y AGU. The Y

AGU supports word-sized data reads for the DSP MAC

class of instructions only. The dsPIC30F AGUs

support:

• Linear Addressing

• Modulo (Circular) Addressing

• Bit-Revers ed Addre ss in g

Linear and Modulo Data Addressing modes can be

applied to data space or program space. Bit-Reversed

Addressi ng is on ly appli cable to data s pace a ddresses .

4.1 Instruction Addressing Modes

The addressing modes in Table 4-1 form the basis of

the addressing modes optimized to support the specific

features of individual instructions. The addressing

modes provided in the MAC class of instructions are

somewhat different from those in the other instruction

types.

4.1.1 FILE REGISTER INSTRUCTIONS

Most Fi le register in structions us e a 13-bit add ress field

(f) to directly address data present in the first 8192

bytes of data memory (Near data space). Most File

whic h is den oted as WREG in these i nstruc tions. The

destination is typically either the same File register or

WREG (with the exception of the MUL instruction),

which w rites the re sult t o a re gister or regi ster p air. The

MOV instruction allows additional flexibility and can

access the entire data space.

4.1.2 MCU INSTRUCTIONS

The three-operand MCU instructions are of the form:

Operand 3 = Operand 1 <function> Operand 2

where O pe rand 1 is alw a ys a work in g reg ister (i.e., the

Addressi ng mod e can o nly b e Regist er Dire ct) wh ich i s

referred to as Wb. Operand 2 can be a W register,

fetched from data memory or a 5-bit literal. The result

location can be either a W register or a data memory

location. The following addressing modes are

supported by MCU instructions:

• Register Direct

• Register Indirect

• Register Indirect Post-modified

• Register Indirect Pre-modified

• 5-bit or 10-bit Literal

TABLE 4-1: FUNDAMENTAL ADDRESSING MODES SUPPORTED

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157).

Note: Not all instructions sup port all the address-

ing mod es giv en abo ve. Ind ividu al ins truc-

tions may support different subsets of

these addressing modes.

Addressing Mode Description

File Register Direct The address of the File register is specified explicitly.

decremented) by a constant value.

to form the EA.

dsPIC30F6011/6012/6013/6014

4.1.3 MOVE AND ACCUMULATOR

INSTRUCTIONS

Move instructions and the DSP accumulator class of

instructions provide a greater degree of addressing

flexibility than other instructions. In addition to the

addressing modes supported by most MCU instruc-

tions, move and accumulator instructions also support

mode, also referred to as Register Indexed mode.

In summary, the following addressing modes are

supported by move and accumulator instructions:

• Register Direc t

• Register Indi rec t

• Register Indi rec t Post-mod ifi ed

• Register Indi rec t Pre- mo dif ied

• Register Indirect with Register Offset (Indexed)

• Register Indirect with Literal Offset

• 8-bit Literal

• 16-bit Literal

4.1.4 MAC INSTRUCTIONS

The dual s ource op erand DSP ins tructio ns (CLR, ED,

EDAC, MAC, MPY, MPY.N, MOVSAC and MSC), als o

referred to a s MAC instruction s, utilize a si mplified se t of

addressing modes to allow the user to effectively

manipulate the data pointers through register indirect

tables.

The 2 source operand prefetch registers must be a

member of the set {W8, W9, W10, W11}. For data

reads, W8 and W9 will always be directed to the X

RAGU and W10 and W11 will a lways be dire cted to the

Y AGU. The ef fective addresses generated (before and

after modification) must, therefore, be valid addresses

within X data space for W8 and W9 and Y data space

for W10 and W11.

In summary, the following addressing modes are

supported by the MAC class of instructions:

• Register Indirect

• Register Indirect Post-modified by 2

• Register Indirect Post-modified by 4

• Register Indirect Post-modified by 6

• Register Indirect with Register Offset (Indexed)

4.1.5 OTHER INSTRUCTIONS

Besides the various addressing mo des outlin ed above,

some i nstructio ns use li teral con sta nts of various sizes.

For example, BRA (branch) instructions use 16-bit

signed l iterals to spe cify the branch de stination dire ctly ,

whereas the DISI instruction uses a 14-bit unsigned

literal field. In some instructions, such as ADD Acc, the

source of an operand or result is implied by the opc ode

it self. Cert ain opera tions, such as NOP, do not have any

operands.

4.2 Modulo Addressing

Modulo Addressing is a method of providing an auto-

mated means to support circular data buffers using

hardwa re. The obj ective is to remo ve the ne ed for so ft-

ware to perform data address boundary checks when

executing tightly looped code, as is typical in many

DSP algorithms.

Modulo Addressing can operate in either data or pro-

gram space (since the data pointer mechanism is

essentially the same for both). One circular buffer can

be support ed in e ach o f the X ( which also provide s th e

pointers int o p rogra m space) and Y d ata spaces. Mod-

ulo Addressi ng can operate on any W regist er pointer.

However, it is not advisable to use W14 or W15 for Mod-

ulo Addressing since these two registers are used as

the Stack Frame Poi nter and Stack Pointer,

respectively.

In general, any particular circular buffer can only be

configu red to o perate in one direc tion, as t here are cer-

tain restrictions on the buffer start address (for incre-

menting buffers), or end address (for decrementing

buffers) based upon the direction of the buffer.

The only exception to the usage restrictions is for buff-

ers which have a power-of-2 length. As these buffers

satisfy the start and end address criteria, they may

operate in a Bidirecti onal mode (i.e., addres s boundar y

checks will be performed on both the lower and upper

address boundaries).

Note: For the MOV instructions, the addressing

mode specified in the instruction can differ

for the source and destination EA.

However, the 4-bit Wb (register offset)

field is shared between both source and

destination (but typically only used by

one).

Note: Not all instructions su pport all the address-

ing mod es giv en abo ve. In divid ual ins truc-

tions may support different subsets of

these addressing modes.

Note: Register indirect with register offset

addressing is only available for W9 (in X

spa ce) and W11 (in Y space).

dsPIC30F6011/6012/6013/6014

4.2.1 START AND END ADDRESS

The Modulo Addressing s cheme requires that a start-

ing and an ending address be sp ecified a nd loaded in to

the 16-bit Modulo Buf fer Address registers: XMODSRT,

XMODEND, YMODSRT, YMODEND (see Table 3-3).

The leng th of a ci rcular buffer is not di rectly s pecified. It

is determined by the difference between the corre-

sponding start and end addresses. The maximum

possible length of the circular buffer is 32K words

(64 Kbytes).

4.2.2 W ADDRESS REGISTER

SELECTION

The Mod ulo an d Bi t-Rev ers ed Add ress in g Co ntro l re g-

ister M O DCON <1 5:0 > c on t ai ns enable fla gs as w ell a s

a W register field to specify the W address registers.

The XWM and YWM fields select which registers will

operate with Modulo Addressing. If XWM = 15, X

RAGU and X WAGU Modulo Addressing is disabled.

Similarly, if YWM = 15, Y AGU Modulo Addressing is

disabled.

The X Address Space Pointer W register (XWM), to

which Modulo Addressing is to be applied, is stored in

MODCON <3:0> (see Table 3-3). Modul o A ddressing is

enabled for X data sp ace when XWM is set to any v alue

other than ‘15’ and the XMODEN bit is set at

MODCON<15>.

The Y Address Space Pointer W register (YWM), to

which Modulo Addressing is to be applied, is stored in

MODCON<7:4>. Modulo Addressing is enabled for Y

data space when YWM is set to any value other than

‘15’ and the YMODEN bit is set at MODCON<14>.

FIGURE 4-1: MODULO ADDRESSING OPERATION EXAMPLE

Note: Y space Modulo Addressing EA calcula-

tions assume word sized data (LSb of

ever y EA is always clear ).

0x1100

0x1163

Start Addr = 0x1100

End Addr = 0x1163

Length = 0x0032 words

Byte

Address MOV #0x1100,W0

MOV W0,XMODSRT ;set modulo start address

MOV #0x1163,W0

MOV W0,MODEND ;set modulo end address

MOV #0x8001,W0

MOV W0,MODCON ;enable W1, X AGU for modulo

MOV #0x0000,W0 ;W0 holds buffer fill value

MOV #0x1110,W1 ;point W1 to buffer

DO AGAIN,#0x31 ;fill the 50 buffer locations

MOV W0,[W1++] ;fill the next location

dsPIC30F6011/6012/6013/6014

4.2.3 MODULO ADDRESSING

APPLICABILITY

Modulo Addressing can be applied to the effective

address calculation associated with any W register. It is

important to realize that the address boundaries check

for addresses less than, or greater than the upper (for

incrementing buffers), and lower (for decrementing

buffers) boundary addresses (not just equal to).

Address changes may, therefore, jump beyond bound-

aries and still be adjusted correctly.

4.3 Bit-Reversed Addressing

Bit-Reversed Addressing is intended to simplify data

re-ordering for radix-2 FFT algorithms. It is supported

by t he X AGU for data writes only.

The m odifier, which ma y be a c onstant value or reg ister

contents, is regarded as having its bit order reve rsed. The

address source and destination are kept in normal order .

Thus, the only operand requiring reversal is the modifier .

4.3. 1 BIT-REVERSED ADDRESSING

IMPLEMENTATION

Bit-Reversed Addressing is enabled when:

1. BWM (W register selection) in the MODCON

cannot be accessed using Bit-Reversed

Addressing) and

2. the BREN bit is set in the XBREV register and

3. the Addressing mode used is Register Indirect

with Pre-Increment or Post-Increment.

If the length of a bit-reversed buffer is M = 2N bytes,

then the last ‘N’ bits of the data buffer start address

must be zero s.

XB<14:0> is th e b it-re versed addres s mo difi er o r ‘p iv ot

point’ which is typically a constant. In the case of an

FFT computation, its value is equal to half of the FFT

dat a buffer size.

When enabled, Bit-Reversed Addressing will only be

executed for register indirect with pre-increment or

post-inc remen t addres sing an d word siz ed dat a wri tes.

It will n ot fun ct ion for an y ot her a ddressing mo de o r for

byte sized data, and normal addresses will be gener-

ated instea d. When Bit-R eversed Addr essin g is active,

the W address pointer will always be added to the

address modifier (XB) and the offset associated with

the Register Indirect Addressing mode will be ignored.

In addition, as word sized data is a requirement, the

LSb of the EA is ignored (and always clear).

If Bit-Reversed Addressing has already been enabled

by setting the BREN (XBREV<15>) bit, then a write to

the XBREV register should not be immediately followed

by an indirect read operation using the W register that

has been designated as the bit-reversed pointer.

Note: The m odu lo corrected effective add res s i s

written back to the re giste r only when Pre-

Modify or Post-Modify Addressing mode is

used to compute the effective address.

When an address offset (e.g., [W7 + W2])

is used , m odu lo a dd res s c orrec ti on i s p er-

formed but the contents of the register

remain unc han ged.

Note: All bit-reversed EA calculations assume

word sized data (LSb of every EA is

always clear). The XB value is scaled

accordingly to generate compatible (byte)

addresses.

Note: Modulo Addressing and Bit-Reversed

Addressing should not be enabled

together . In the event that the user attempts

to do this, Bit-Reversed Addressing will

assume priority when active for the X

WAGU, and X WAGU Modulo Addressing

will be disabled. However, Modulo

Addressing will continue to function in the X

RAGU.

dsPIC30F6011/6012/6013/6014

FIGURE 4-2: BIT-REVERSED ADDRESS EXAMPLE

TABLE 4-2: BIT-REVERSED ADDRESS SEQUENCE (16-ENTRY)

TABLE 4-3: BIT-REVERSED ADDRESS MODIFIER VALUES FOR XBREV REGISTER

Normal Address Bit-Reversed Address

A3 A2 A1 A0 Decimal A3 A2 A1 A0 Decimal

0000 00000 0

0001 11000 8

0010 20100 4

0011 31100 12

0100 40010 2

0101 51010 10

0110 60110 6

0111 71110 14

1000 80001 1

1001 91001 9

1010 10 0101 5

1011 11 1101 13

1100 12 0011 3

1101 13 1011 11

1110 14 0111 7

1111 15 1111 15

Buffer Size (Words) XB<14:0> Bit-Reversed Address Modifier Value

4096 0x0800

2048 0x0400

1024 0x0200

512 0x0100

256 0x0080

128 0x0040

64 0x0020

32 0x0010

16 0x0008

8 0x0004

4 0x0002

2 0x0001

b3 b2 b1 0

b2 b3 b4 0

Bit Locations Swapped Left-to-Right

Around Center of Binary Value

Bit-Reversed Address

XB = 0x0008 for a 16-word Bit-Reversed Buffer

b7 b6 b5 b1

b7 b6 b5 b4b11 b10 b9 b8

b11 b10 b9 b8

b15 b14 b13 b12

Sequential Address

Pivot Point

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

5.0 INTERRUPTS

The dsPIC30F Sensor and General Purpose Family

has up to 41 interrupt sources and 4 processor excep-

tions (traps) which must be arbitrated based on a

priority scheme.

The CPU i s respons ible for rea ding the I nterrupt Vector

Table (IVT) and transferring the address contained in

the interrupt vector to the program counter. The inter-

rupt vector is transferred from the program data bus

into the program counter via a 24-bit wide multiplexer

on the input of the program counter.

The Inte rrupt Vector Table (IVT) an d Alter nate In terrupt

Vector Table (AIVT) are placed near the beginning of

program memory (0x000004). The IVT and AIVT are

shown in Table 5-1.

The interrupt controller is responsible for pre-

processing the interrupts and processor exceptions

prior to them being presented to the processor core.

The peripheral interrupts and traps are enabled, priori-

tized and co ntrolle d using cen tral ized Specia l Functio n

Registers:

• IFS0<15:0>, IFS1<15:0>, IFS2<15:0>

All interrupt request flags are maintained in these

three registers. The flags are set by their respec-

tive peripherals or external signals, and they are

cleared via software.

• IEC0<15:0>, IEC1<15:0>, IEC2<15:0>

All interrupt enable control bits are maintained in

these three registers. These control bits are used

to individually enable interrupts from the

peripherals or external signals.

• IPC0<15:0>... IPC10<7:0>

The user assignable priority level associated with

each of these 41 interrupts is held centrally in

these twelve registers.

• IPL<3:0>

The current CPU priority level is explicitly stored

in the IPL bi ts. IPL<3> i s p res en t in the C ORCO N

STATUS register (SR) in the processor core.

• INTCON1< 15:0>, INTCON2<15 :0>

Global interrupt control functions are deriv ed from

these two registers. INTCON1 contains the con-

trol and status flags for the processor exceptions.

The INTCON2 register controls the external

interrupt request signal behavior and the use of

the alternate vector table.

All interrupt sources can be user assigned to one of 7

priori ty levels, 1 thro ugh 7, via the IPCx registers . Each

interrupt source is associated with an interrupt vector,

as shown in Table 5-1. Levels 7 and 1 represent the

highest and lowest maskable priorities, respectively.

If the NSTDIS bit (INTCON1<15>) is set, nesting of

interrupts is prev en ted . Thus, if a n i nte rrupt is c urrentl y

being serviced, processing of a new interrupt is pre-

vented even if the new interrupt is of higher priorit y than

the one currently being serviced.

Certain interrupts have specialized control bits for fea-

tures like edge or level triggered interrupts, interrupt-

on-change, etc. Control of these features remains

within the peripheral module which generates the

interrupt.

The DISI instruction can be used to disable the pro-

cessing of interrupts of priorities 6 and lower for a cer-

tain number of instructions, during which the DISI bit

(INTCON2<14>) remains set.

When an interrupt is serviced, the PC is loaded with the

address stor ed in the vector locati on in program mem-

ory that cor res ponds to the interru pt. There are 63 dif-

feren t vectors wi thin the IVT (refer to Table 5-1). These

vectors are contained in locations 0x000004 through

0x0000FE of program memory (refer to Table 5-1).

These locations contain 24-bit addresses and in order

to preserve robustness, an address error trap will take

place should the PC attempt to fetch any of these

words during normal execution. This prevents execu-

tion of random data as a result of accidentally decre-

menting a PC into vector space, accidentally mapping

a data space add res s int o vector space, or the PC roll-

ing over to 0x000000 after reaching the end of imple-

mented program memory space. Execution of a GOTO

instruction to this vector space will also generate an

address error trap.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157). Note: Interru pt flag bit s get set when an interru pt

conditi on occ urs, regar dless o f the s tate of

its corresponding enable bit. User soft-

ware should ensure the appropriate inter-

rupt flag bits are clear prior to enabling an

interrupt.

Note: Assigning a priority level of ‘0’ to an inter-

rupt source is equivalent to disabling that

interrupt.

Note: The IPL bits become read only whenever

the NSTDIS bit has been set to ‘1’.

dsPIC30F6011/6012/6013/6014

5.1 Interrupt Priority

The user assignable interrupt priority (IP<2:0>) bits for

each ind ividual interrupt source are located in the Least

Significant 3 bits of each nibble within the IPCx regis-

ter(s). Bit 3 of each nibble is not used and is read as a

‘0’. These bits define the priority level assigned to a

particular interrupt by the user.

Natural Order Priority is determined by the position of

an interrupt in the vector table, and only affects

interrupt operation when multiple interrupts with the

same user-assigned priority become pending at the

same time.

Table 5-1 lists the interrupt numbers and interrupt

sources for the dsPIC DSC device and their associated

vector numbers.

The ability for the user to assign every interrupt to one

of sev en priority lev els i mp lie s tha t the user c an as sig n

a very high overall priority level to an interrupt with a

low natural order priority. For exa mple, the PLVD (Low-

Voltage Detect) can be given a priority of 7. The INT0

(External Interrupt 0) may be assigned to priority level

1, thus giving it a very low effective priority.

TABLE 5-1: INTERRUPT VECTOR TABLE

Note: The user selectable priority levels start at

0 as the lo west pri ority an d level 7 as the

highest priority.

Note 1: The natural order priority scheme has 0

as the highest priority and 53 as the

lowest priority.

2: The natural order priority number is the

same as the INT number.

INT

Number Vector

Number Interrupt Source

Highest Natural Order Priority

0 8 INT0 – External Interr upt 0

1 9 I C1 – I nput Capture 1

2 10 OC1 – Output Compar e 1

3 11 T1 – Timer 1

4 12 IC2 – Inp ut Capt ur e 2

5 13 OC2 – Output Compar e 2

6 14 T2 – Timer 2

7 15 T3 – Timer 3

816SPI1

9 17 U1RX – UART1 Receiver

10 18 U1TX – UART1 Transmitter

11 19 AD C – ADC Convert Done

12 20 NVM – NVM Write Complete

13 21 SI2C – I2C Slave Interrupt

14 22 MI2C – I 2C M aster Inter r upt

15 23 Input Change Interrupt

16 24 INT1 – External Interrupt 1

17 25 IC7 – Input Captur e 7

18 26 IC8 – Input Captur e 8

19 27 OC3 – Output Compar e 3

20 28 OC4 – Output Compar e 4

21 29 T4 – Timer 4

22 30 T5 – Timer 5

23 31 INT2 – External Interrupt 2

24 32 U2RX – UART2 Receiver

25 33 U2TX – UA RT2 Transmitter

26 34 SPI2

27 35 C1 – Combined IRQ for CAN1

28 36 IC3 – Input Captur e 3

29 37 IC4 – Input Captur e 4

30 38 IC5 – Input Captur e 5

31 39 IC6 – Input Captur e 6

32 40 OC5 – Output Compar e 5

33 41 OC6 – Output Compar e 6

34 42 OC7 – Output Compar e 7

35 43 OC8 – Output Compar e 8

36 44 INT3 – External Interrupt 3

37 45 INT4 – External Interrupt 4

38 46 C2 – Combined IRQ for CAN2

39-40 47-48 Reserved

41 49 DCI – Codec Transfer Done

42 50 LVD – Low-Voltage Detect

43-53 51-61 Reserved

Lowest Natural Order Priority

dsPIC30F6011/6012/6013/6014

5.2 Reset Sequence

A Reset is not a true exception, because the interrupt

controll er is not involv ed in the Reset proce ss. The pro-

cessor initializes its registers in response to a Reset

which forces the PC to zero. The processor then begins

program execution at location 0x000000. A GOTO

instruction is stored in the first program memory loca-

tion immediately followed by the address target for the

GOTO instruction. The processor executes the GOTO to

the speci f ie d add res s and then begi ns op erat ion at the

specified target (start) address.

5.2.1 RESET SOURCES

In addition to external Reset and Power-on Reset

(POR), there are 6 sources of error conditions which

‘trap’ to the Reset vector.

• Watchdog Time-out:

The watchdog has timed out, indicating that the

process or is no longer ex ecu tin g the corre ct flo w

of code.

• Uninitialized W Register Trap:

An attempt to use an uninitialized W register as

an address pointer will cause a Reset.

• Illegal Instruction Trap:

Attempted execution of any unused opcodes will

result in an illegal instruction trap. Note that a

fetch of an illegal instruction does not result in an

illegal instruction trap if that instruction is flushed

prior to execution due to a flow change.

• Brown-out Reset (BOR):

A momentary dip in the power supply to the

device has been detected which may result in

malfunction.

• Trap Lockout:

Occurrence of multiple trap condit ions

simultaneously will cause a Reset.

5.3 Traps

Traps can be considered as non-maskable interrupts

indicating a software or hardware error, which adhere

to a predef ined priority , as shown in Table 5-1. They are

intended to provide the user a means to correct

erroneous o pera t io n d uri ng deb ug and when operating

within the application.

Note that many of these trap conditions can only be

detected when th ey occur. Conseque ntly, the ques tion-

able instruction is allowed to complete prior to trap

exception processing. If the user chooses to recover

from the error, the result of the erroneous action that

caused the trap may have to be corrected.

There are 8 fixed priority levels for traps: level 8 through

level 15, which implies that the IPL3 is always set

during pr ocessing of a trap.

If the us er is n ot cur rentl y execu ting a trap, a nd he s et s

the IPL<3:0> bits to a value of ‘0111’ (level 7), then all

interr upts are disabl ed b ut trap s can st ill be proces sed.

5.3.1 TRAP SOURCES

The following traps are provided with increasing prior-

ity. However, since all traps can be nested, priority has

little effect.

Math Error Trap:

The math error trap executes under the following four

circumstances:

1. Should an attempt be made to divide by zero,

the divide operation will be aborted on a cycle

boundary and the trap taken.

2. If enabled, a math error trap will be taken when

an arithmetic operation on either accumulator A

or B causes an overflow from bit 31 and the

accumulator guard bits are not utilized.

3. If enabled, a math error trap will be taken when

an arithmetic operation on either accumulator A

or B causes a catastrophic overflow from bit 39

and all saturation is disabled.

4. If the shift amount specified in a shift instruction

is greater than the maximum allowed shift

amount, a trap will occur.

Address Error Trap:

This trap is initiated when any of the following

circumstances occurs:

1. A misaligned data word access is attempted.

2. A data fetch from and unimplemented data

memory location is attempted.

3. A data fetch from an unimplemented program

memory location is attempted.

4. An instruction fetch from vector space is

attempted.

Note: If the user does not intend to take correc-

tive action in the event of a trap error con-

dition, these vectors must be loaded with

the address of a default handler that sim-

ply contains the RESET instruction. If, on

the ot her hand, one of the vectors contai n-

ing an invalid address is called, an

address error trap is generated.

Note: In the MAC class of instructions, wherein

the data space is split into X and Y data

space, unimplemented X space includes

all of Y space, and unimplemented Y

space includes all of X space.

dsPIC30F6011/6012/6013/6014

5. Execution of a “BRA #literal” instruction or a

“GOTO #literal” ins truc ti on, w he re literal

is an u nimplem ented pr ogram me mory addr ess.

6. Executing instructions after modifying the PC to

point to unimplemented program memory

addresses. The PC may be modified by loading

a value into the stack and executing a RETURN

instruction.

Stack Error Trap:

This trap is initiated under the following conditions:

1. The Stack Pointer is loaded with a value which

is greater than the (user programmable) limit

value written into the SPLIM register (stack

overflow).

2. The Stack Pointer is loaded with a value which

is less than 0x0800 (simple stack underflow).

Oscillator Fail Trap:

This trap is initiated if the external oscillator fails and

operation becomes reliant on an internal RC backup.

5.3.2 HARD AND SOFT TRAPS

It is possible that multiple traps can become active

within the same cycle (e.g., a misaligned word stack

write to an overflowed address). In such a case, the

fixed priority shown in Figure 5-1 is implemented,

whic h may requir e the user t o check if oth er traps are

pending in order to completely correct the fault.

‘Soft’ traps includ e exceptions of priority le vel 8 through

level 11, inclusive. The arithmetic error trap (level 11)

falls into this category of traps.

‘Hard’ traps include exceptions of priority level 12

through level 15, inclusive. The address error (level

12), stack error (level 13) and oscillator error (level 14)

traps fall into this category.

Each hard trap that occurs must be Acknowledged

before code execution of any type may continue. If a

lower priority hard trap occurs while a higher priority

trap is pending, Acknowledged, or is being processed,

a hard trap conflict will occur.

The device is automatically reset in a hard trap conflict

condition. The TRAPR status bit (RCON<15>) is set

when the Reset occurs so that the condition may be

detected in software.

FI G U RE 5 -1 : TRAP VECTORS

5.4 Interrupt Sequence

All interr upt event flags are sampled in the be ginning of

each instruction cycle by the IFSx registers. A pending

interrupt re quest (I RQ) is in dicate d by the flag bit b eing

equal t o a ‘1’ in an IFSx register . The IRQ will cause an

interrupt to occur if the corresponding bit in the Interrupt

Enable (IECx) register is set. For the remainder of the

instruction cycle, the priorities of all pending interrupt

requests are evaluated.

If there is a pending IRQ with a priority level greater

than the current processor priority level in the IPL bits,

the processor will be interrupted.

The proce ssor then stac ks the current program counter

and the low byte of the processor STATUS register

(SRL), as shown in Figure 5-2. The low byte of the

ST ATUS register contai ns the processor priority level at

the time prior to the beginning of the interrupt cycle.

The pr ocessor then load s the prio rity leve l for this inter-

rupt into the STATUS register. This action will disable

all lower priority interrupts until the completion of the

Interrupt Service Ro utine.

Address Error Trap Vector

Oscillator Fail Trap Vector

Stack Error Trap Vector

Reserved Vector

Math Error Trap Vector

Reserved

Oscillator Fail Trap Vector

Address Error Trap Vector

Reserved Vector

Reserv ed Vector

Interrupt 0 Vector

Interrupt 1 Vector

Interrupt 52 Vector

Interrupt 53 Vector

Math E rror Trap Vector

Decreasing

Priority

0x000000

0x000014

Reserved

Stack Error Trap Vector

Reserved Vector

Interrupt 0 Vector

Interrupt 1 Vector

Interrupt 52 Vector

Interrupt 53 Vector

IVT

AIVT

0x000080

0x00007E

0x0000FE

Reserved

0x000094

Reset - GOTO Instruction

Reset - GOTO Addr ess 0x000002

Reserved 0x000082

0x000084

0x000004

Reserved Vector

dsPIC30F6011/6012/6013/6014

FIGURE 5-2 : INTERRUPT STACK

FRAME

The RETFIE (Return from Interrupt) instruction will

unstack the program counter and STATUS registers to

return the processor to its state prior to the interrupt

sequence.

5.5 Alternate Vector Table

In program memory, the Interrupt Vector Table (IVT) is

follow ed b y the A ltern ate I nte rrupt Vecto r Table (AIVT),

as shown in Table 5-1. Access to the alternate vector

tabl e is provided by the AL TIV T bit in the INTCON2 reg-

ister. If the ALTIVT bit is set, all interr upt and exce ptio n

processes will use the alternate vectors instead of the

default vectors. The alternate vectors are organized in

the same manner as the default vecto rs. The AIVT sup-

ports emulation and debugging efforts by providing a

means to s wit c h betwe en an application and a supp ort

environment without requiring the interrupt vectors to

be reprogram m ed. This featu re als o en abl es switc hin g

between applications for evaluation of different

software algorithms at run time.

If the AIVT is not required, the program memory allo-

cated to the AIVT may be used for other purposes.

AIVT is not a protected section and may be freely

programmed by the user.

5.6 Fast Context Saving

A context saving option is available using shadow reg-

isters. Shadow registers are provided for the DC, N,

OV, Z an d C bits in SR, and the re gisters W 0 through

W3. The shadows are only one level deep. The s hadow

registers are accessible using the PUSH.S and POP.S

inst ruc tion s onl y.

When the processor vectors to an interrupt, the

PUSH.S instruction can be used to store the current

value of the aforementioned registers into their

respective shadow registers.

If an ISR of a certain priority uses the PUSH.S and

POP.S instructions for fast context saving, then a

higher priority IS R shou ld no t inc lude the s ame ins truc-

tions. Users must save the key registers in software

during a lo wer priorit y interru pt if the hi gher pri ority ISR

uses fast context saving.

5.7 External Interrupt Requests

The interrupt controller supports up to five external

interrupt request signals, INT0-INT4. These inputs are

edge sensitive; they require a low-to-high or a high-to-

low transition to generate an interrupt request. The

INTCON2 register has five bits, INT0EP-INT4EP, that

select the polarity of the edge detection circuitry.

5.8 Wake-up from Sleep and Idle

The interrupt controller may be used to wake-up the

processor from either Sleep or Idle modes, if Sleep or

Idle mode is active when the interrupt is generated.

If an enabled interrupt request of sufficient priority is

received by the interrupt controller, then the standard

interrupt request is presented to the processor. At the

same time, the processor will wake-up from Sleep or

Idle and begin execution of the Interrupt Service

Routine (ISR) needed to process the interrupt request.

Note 1: The user can always lower the priority

level by writing a new value into SR. The

Interrupt Service Routine must clear the

interrupt flag bits in the IFSx register

before lowering the processor interrupt

priority, in order to avoid recursive

interrupts.

2: The IPL3 bit (CORCON<3>) is always

clear when interrupts are being pro-

cessed. It is set only during execution of

traps.

015

W15 (before CALL)

W15 (after CALL)

Stack Grows Towards

Higher Address

0x0000

PC<15:0>

SRL IPL3 PC<22:16>

POP : [--W15]

PUSH: [W15++]

dsPIC30F6011/6012/6013/6014

TABLE 5-2: INTERRUPT CONTROLLER REGISTER MAP

SFR

Name ADR Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

INTCON1 0080 NSTDIS ———— OVATE OVBTE COVTE — — — MATHERR ADDRERR STKERR OSCFAIL —0000 0000 0000 0000

INTCON2 0082 ALTIVT DISI — — — — — — — — — INT4EP INT3EP INT2EP INT1EP INT0EP 0000 0000 0000 0000

IFS0 0084 CNIF MI2CIF SI2CIF NVMIF ADIF U1 TXIF U1RXIF SPI1IF T3IF T2IF OC2IF IC2IF T1IF OC1IF IC1IF INT0IF 0000 0000 0000 0000

IFS1 0086 IC6IF IC5IF IC4IF IC3IF C1IF SPI2IF U2TXIF U2RXIF INT2IF T5IF T4IF OC4IF OC3IF IC8IF IC7IF INT1IF 0000 0000 0000 0000

IFS2 0088 — — — — — LVDIF DCIIF —— C2IF INT4IF INT3IF OC8IF OC7IF OC6IF OC5IF 0000 0000 0000 0000

IEC0 008C CNIE MI2CIE SI2CIE NVMIE ADIE U1TXIE U1RXIE SPI1IE T3IE T2IE OC2IE IC2IE T1IE OC1IE IC1IE INT0IE 0000 0000 0000 0000

IEC1 008E IC6IE IC5IE IC4IE IC3IE C1IE SPI2IE U2TXIE U2RXIE INT2IE T5IE T4IE OC4IE OC3IE IC8IE IC7IE INT1IE 0000 0000 0000 0000

IEC2 0090 — — — — — LVDIE DCIIE —— C2IE INT4IE INT3IE OC8IE OC7IE OC6IE OC5IE 0000 0000 0000 0000

IPC0 0094 — T1IP<2:0> —OC1IP<2:0>— IC1IP<2:0> — INT0IP<2:0> 0100 0100 0100 0100

IPC1 0096 — T31P<2:0> — T2IP<2:0> — OC2IP<2:0> — IC2IP<2:0> 0100 0100 0100 0100

IPC2 0098 —ADIP<2:0>— U1TXIP<2:0> — U1RXIP<2:0> — SPI1IP<2:0> 0100 0100 0100 0100

IPC3 009A — CNIP<2:0> —MI2CIP<2:0>— SI2CIP<2:0> — NVMIP<2:0> 0100 0100 0100 0100

IPC4 009C —OC3IP<2:0>—IC8IP<2:0>— IC7IP<2:0> — INT1IP<2:0> 0100 0100 0100 0100

IPC5 009E — INT2IP<2:0> — T5IP<2:0> — T4IP<2:0> — OC4IP<2:0> 0100 0100 0100 0100

IPC6 00A0 — C1IP<2:0> — SPI2IP<2:0> — U2TXIP<2:0> — U2RXIP<2:0> 0100 0100 0100 0100

IPC7 00A2 — IC6IP<2:0> —IC5IP<2:0>— IC4IP<2:0> — IC3IP<2:0> 0100 0100 0100 0100

IPC8 00A4 —OC8IP<2:0>—OC7IP<2:0>— OC6IP<2:0> — OC5IP<2:0> 0100 0100 0100 0100

IPC9 00A6 — — — — — C2IP<2:0> — INT41IP<2:0> — INT3IP<2:0> 0000 0100 0100 0100

IPC10 00A8 — — — — — LVDIP<2:0> — DCIIP<2:0> — — — — 0000 0100 0100 0000

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

6.0 FLASH PROGRAM MEMORY

The dsPIC30F family of devices contains internal pro-

gram Fla sh memory f or executing user code. Th ere are

two methods by which the user can program this

memory:

1. Run-Time Self-Programmi ng (RTSP )

2. In-Circuit Serial Programming (ICSP)

6.1 In-Circuit Serial Programming

(ICSP)

dsPIC30F devices can be serially programmed while i n

the end ap plica tion ci rcuit. Th is is s imply do ne wit h two

lines for Programming Clock and Programming Data

(which are named PGC and PGD respectively), and

three other lines for Power (VDD), Ground (VSS) and

Master Cl ear (MCLR ). This allows customers to manu-

facture boards with unprogrammed devices, and then

program the microcontroller just before shipping the

product. This also allows the most recent firmware or a

custom firmware to be programmed.

6.2 Run-Time Self-Programming

(RTSP)

RTSP is accomplished using TBLRD (table read) and

TBLWT (table wr ite) ins tru cti ons .

With RTSP, the user may erase program memory, 32

instruc tions (96 bytes) at a tim e an d c an write program

memory data, 32 instructions (96 bytes) at a time.

6.3 Table Instruction Operation

Summary

The TBLRDL and the TBLWTL instructions are used to

read or write to bits<15:0> of program memory.

TBLRDL and TBLWTL can access program memory in

Word or Byte mode.

The TBLRDH and TBLWTH i nstructio ns are used to read

or write to bits<23:16> of program memory. TBLRDH

and TBLWTH can access program memory in Word or

Byte mode.

A 24-bit program memory address is formed using

bits<7:0> of the TBLPAG register and the effective

address (EA) from a W register specified in the table

instruction, as shown in Figure 6-1.

FIGURE 6-1: ADDRESSING FOR TABLE AND NVM REGISTERS

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157).

Program Counter

24 bits

NVMADRU Reg

8 bits 16 bits

Program

Using

TBLPAG Reg

8 bits

Working Reg EA

16 bits

Using

Byte

24-bit EA

1/0

Select

Table

Instruction

NVMADR

Addressing

Counter

Using

NVMADR Reg EA

User/Configuration

Space Select

dsPIC30F6011/6012/6013/6014

6.4 RTSP Operation

The dsPIC30F Flash program memory is organized

into rows and panels. Each row consists of 32 instruc-

tions or 96 bytes. Each panel consists of 128 rows or

4K x 24 instructions. RTSP allows the user to erase one

row (32 instructions) at a time and to program four

instructions at one time. RTSP may be used to program

multiple program memory panels, but the table pointer

must be changed at each panel boundary.

Each panel of program memory contains write latches

that hold 32 instructions of programming data. Prior to

the actual programming operation, the write data must

be loaded into the panel write latches. The data to be

programmed into the panel is loaded in sequential

order into the write latches: instruction 0, instruction 1,

etc. T he i ns truc tio n words loaded m us t a lway s b e fro m

a group of 32 boundary.

The basi c sequence for R TSP programming is to set up

a table point er, th en do a serie s of TBLWT instructions

to load th e wri te latc hes. Program ming is perfo rmed by

setting the special bits in the NVMCON register. Four

TBLWTL and four TBLWTH instructions are required to

load the four instructions. If multiple panel program-

ming is required, the table pointer needs to be changed

and the next set of multiple write latches written.

All of the table write operations are single word writes

(2 instruction cycles) because only the table latches

are written. A programming cycle is required for

programming each row.

The Flash program memory is readable, writable, and

erasable during normal operation over the entire VDD

range.

6.5 Control Registers

The four SFRs used to read and write the program

Flash memory are:

•NVMCON

• NVMADR

• NVMADRU

• NVMKEY

6.5.1 NVMCON REGISTER

The NVMCON register controls which blocks are to be

erased, which memory type is to be programmed and

start of the programming cycle.

6.5.2 NVMADR REGISTER

The NVMADR register is used to hold the lower two

bytes of the effective address. The NVMADR register

captures the EA<15 :0> of the last table instru ct ion that

has been executed and selects the row to write.

6.5.3 NVMADRU REGISTER

The NVMADRU register is used to hold the upper byte

of the effective address. The NVMADRU register cap-

tures the EA<23:16> of the last table instruction that

has been exec uted.

6.5. 4 NVMKEY REGISTER

NVMKEY is a write only register that is used for write

protection. To start a programming or an erase

sequenc e, th e use r mus t cons ecuti vely w rite 0x55 and

0xAA to the NVMKEY register. Refer to Section 6.6

“Programming Operations” for further details.

Note: The user can also directly write to the

NVMADR and NVMADRU registers to

specify a program memory address for

erasing or programming.

dsPIC30F6011/6012/6013/6014

6.6 Programming Operati ons

A complete programming sequence is necessary for

programming or erasing the internal Flash in RTSP

mode. A progra mming operati on is nominally 2 ms ec in

duration and the processor stalls (waits) until the oper-

ation is finished. Setting the WR bit (NVMCON<15>)

starts the operation, and the WR bit is automatically

cleared when the operation is finished.

6.6.1 PROGRAMMING ALGORITHM FOR

PROGRAM FLASH

The user can erase and program one row of program

Flash memory at a time. The general process is:

1. Read one row of program Flash (32 instruction

words) and store into data RAM as a data

“image”.

2. Update the data image with the desired new

data.

3. Erase program Flash row.

a) Setup NVMCON register for multi-word,

program Flash, erase, and set WREN bit.

b) Write address of row to be erased into

NVMADRU/NVMADR.

c) Write ‘55’ to NVMKEY.

d) Write ‘AA’ to NVMKEY.

e) Set the WR bit. This will begin erase cycle.

f) CPU will stall for the duration of the erase

cycle.

g) The WR bit is cleared when erase cycle

ends.

4. Write 32 instruction words of data from data

RAM “image” into the program Flash write

latches.

5. Program 32 instruction words into program

Flash.

a) Setup NVMCON register for multi-word,

program Flash, program, and set WREN

bit.

b) Write ‘55’ to NVMKEY.

c) Write ‘AA’ to NVMKEY.

d) Set the WR bit. This will begin program

cycle.

e) CPU will stall for duration of the program

cycle.

f) The WR bit is cleared by the hardware

when program cycle ends.

6. Repeat step s 1 through 5 as need ed to program

desired amount of program Flash memory.

6.6.2 ERASING A ROW OF PROGRAM

MEMORY

Example 6-1 show s a code seque nce that can be used

to erase a row (32 instructions) of program memory.

EXAMPLE 6-1: ERASING A ROW OF PROGRAM MEMORY

; Setup NVMCON for erase operation, multi word write

; program memory selected, and writes enabled

MOV #0x4041,W0 ;

MOV W0,NVMCON ; Init NVMCON SFR

; Init pointer to row to be ERASED

MOV #tblpage(PROG_ADDR),W0 ;

MOV W0,NVMADRU ; Initialize PM Page Boundary SFR

MOV #tbloffset(PROG_ADDR),W0 ; Intialize in-page EA[15:0] pointer

MOV W0, NVMADR ; Initialize NVMADR SFR

DISI #5 ; Block all interrupts with priority <7 for

; next 5 instructions

MOV #0x55,W0

MOV W0,NVMKEY ; Write the 0x55 key

MOV #0xAA,W1 ;

MOV W1,NVMKEY ; Write the 0xAA key

BSET NVMCON,#WR ; Start the erase sequence

NOP ; Insert two NOPs after the erase

NOP ; command is asserted

dsPIC30F6011/6012/6013/6014

6.6.3 LOADING WRITE LATCHES

Example 6-2 shows a sequence of instructions that can

be used to load the 96 bytes of write latches. 32

TBLWTL and 32 TBLWTH instructions are needed to

load the writ e latches selected by the table pointer.

EXAMP L E 6-2: LOA DIN G WRIT E LA TCHES

6.6.4 INITIATING THE PROGRAMMING

SEQUENCE

For protec tion, the w rite i nitiate sequenc e for N VMKEY

must be used to allow any erase or program operation

to procee d. After the prog ramming comm and has bee n

executed, the user must wait for the programming time

until programming is complete. The two instructions

following the start of the programming sequence

should be NOPs.

EXAMPLE 6-3: INITIATING A PROGRAMMING SEQUENCE

; Set up a pointer to the first program memory location to be written

; program memory selected, and writes enabled

MOV #0x0000,W0 ;

MOV W0,TBLPAG ; Initialize PM Page Boundary SFR

MOV #0x6000,W0 ; An example program memory address

; Perform the TBLWT instructions to write the latches

; 0th_program_word

MOV #LOW_WORD_0,W2 ;

MOV #HIGH_BYTE_0,W3 ;

TBLWTL W2,[W0] ; Write PM low word into program latch

TBLWTH W3,[W0++] ; Write PM high byte into program latch

; 1st_program_word

MOV #LOW_WORD_1,W2 ;

MOV #HIGH_BYTE_1,W3 ;

TBLWTL W2,[W0] ; Write PM low word into program latch

TBLWTH W3,[W0++] ; Write PM high byte into program latch

; 2nd_program_word

MOV #LOW_WORD_2,W2 ;

MOV #HIGH_BYTE_2,W3 ;

TBLWTL W2, [W0] ; Write PM low word into program latch

TBLWTH W3, [W0++] ; Write PM high byte into program latch

•

; 31st_program_word

MOV #LOW_WORD_31,W2 ;

MOV #HIGH_BYTE_31,W3 ;

TBLWTL W2, [W0] ; Write PM low word into program latch

TBLWTH W3, [W0++] ; Write PM high byte into program latch

Note: In Example 6-2, the contents of the upper byte of W3 has no effect.

DISI #5 ; Block all interrupts with priority <7 for

; next 5 instructions

MOV #0x55,W0 ;

MOV W0,NVMKEY ; Write the 0x55 key

MOV #0xAA,W1 ;

MOV W1,NVMKEY ; Write the 0xAA key

BSET NVMCON,#WR ; Start the erase sequence

NOP ; Insert two NOPs after the erase

NOP ; command is asserted

dsPIC30F6011/6012/6013/6014

TABLE 6-1: NVM REGISTER MAP

File Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All RESETS

NVMCON 0760 WR WREN WRERR — — — —TWRI — PROGOP<6:0> 0000 0000 0000 0000

NVMADR 0762 NVMADR<15:0> uuuu uuuu uuuu uuuu

NVMADRU 0764 — — — — — — — — NVMADR<23:16> 0000 0000 uuuu uuuu

NVMKEY 0766 — — — — — — — — KEY<7:0> 0000 0000 0000 0000

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

7.0 DATA EEPROM MEMORY

The Data EEPROM Memory is readable and writable

during no rmal operatio n over the enti re VDD range. The

data EEPROM memory is directly mapped in the

program memory address space.

The four SFRs used to read and write the program

Flash memory are used to access data EEPROM

memory, as well. As described in Section 6.5 “Control

Registers”, these registers are:

•NVMCON

• NVMADR

• NVMADRU

• NVMKEY

The EEPR OM data memory allows read and writ e of

single words and 16-word blocks. When interfacing to

data memory, NVMADR in conjunction with the

NVMADRU register are used to address the EEPROM

location being accessed. TBLRDL and TBLWTL

instructions are used to read and write data EEPROM.

The dsPIC30F devices have up to 8 Kbytes (4K

words) of data EEPROM with an address ran ge from

0x7FF00 0 to 0x 7FFF FE .

A word wri te operatio n should be prec eded by an e rase

of the corresponding memory location(s). The write typ-

ically requires 2 ms to complete but the write time will

vary w ith voltage and temperature.

A program or erase operation on the data EEPROM

does n ot sto p the ins truc tion fl ow. The us er is r espon -

sible for waiting for the appropriate duration of time

before initiating another data EEPROM write/erase

operation. Attempting to read the data EEPROM while

a programming or erase operation is in progress results

in unspecified data.

Control bit WR initiates write operations similar to pro-

gram Flash writ es . Th is bi t c an not be cleared, only se t,

in software. They are cleared in hardware at the com-

pletion of the write operation. The inability to clear the

WR bit in software prevents the accidental or

premature termination of a write operation.

The WREN bit, when set, will allow a write operation.

On powe r-up, the WR EN bit is clear. The WRERR bi t is

set when a write operation is interrupted by a MCLR

Reset or a WDT Time-out Reset during normal opera-

tion. In these situations, following Reset, the user can

check the WRERR bit and rewrite the location. The

address register NVMADR remains unchanged.

7.1 Reading the Data EEPROM

A TBLRD instruction reads a word at the current pro-

gram word address. This example uses W0 as a

pointer to data EEPROM. The result is placed in

EXAMPLE 7-1: DATA EEPROM READ

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157).

Note: Interrupt flag bit NVMIF in the IFS0 regis-

ter is set when write is complete. It must be

cleared in software.

MOV #LOW_ADDR_WORD,W0 ; Init Pointer

MOV #HIGH_ADDR_WORD,W1

MOV W1

TBLPAG

TBLRDL [ W0 ], W4 ; read data EEPROM

dsPIC30F6011/6012/6013/6014

7.2 Erasing Data EEPROM

7.2.1 ERASI NG A BLOCK OF DATA

EEPROM

In order to erase a block of data EEPROM, the

NVMADRU and NVMAD R registers must initially point

to the block of memory to be erased. Configure

NVMCON for erasing a block of data EEPROM, and

set the ERASE and WREN bits in the NVMCON

shown in Ex ample 7-2.

EXAMPLE 7-2: DATA EEPROM BLOCK ERASE

7.2.2 ERASING A WO RD OF DATA

EEPROM

The NVMADRU and NVMADR regis ters must point to

the block. Select erase a block of data Flash, and set

the ERASE and WREN bits in the NVMCON register.

Setting the WR bit initiates the erase as shown in

Example 7-3.

EXAMPLE 7-3: DATA EEPROM WORD ERASE

; Select data EEPROM block, ERASE, WREN bits

MOV #0x4045,W0

MOV W0,NVMCON ; Initialize NVMCON SFR

; Start erase cycle by setting WR after writing key sequence

DISI #5 ; Block all interrupts with priority <7 for

; next 5 instructions

MOV #0x55,W0 ;

MOV W0,NVMKEY ; Write the 0x55 key

MOV #0xAA,W1 ;

MOV W1,NVMKEY ; Write the 0xAA key

BSET NVMCON,#WR ; Initiate erase sequence

NOP

; Erase cycle will complete in 2mS. CPU is not stalled for the Data Erase Cycle

; User can poll WR bit, use NVMIF or Timer IRQ to determine erasure complete

; Select data EEPROM word, ERASE, WREN bits

MOV #0x4044,W0

MOV W0,NVMCON

; Start erase cycle by setting WR after writing key sequence

DISI #5 ; Block all interrupts with priority <7 for

; next 5 instructions

MOV #0x55,W0 ;

MOV W0,NVMKEY ; Write the 0x55 key

MOV #0xAA,W1 ;

MOV W1,NVMKEY ; Write the 0xAA key

BSET NVMCON,#WR ; Initiate erase sequence

NOP

; Erase cycle will complete in 2mS. CPU is not stalled for the Data Erase Cycle

; User can poll WR bit, use NVMIF or Timer IRQ to determine erasure complete

dsPIC30F6011/6012/6013/6014

7.3 Writing to the Data EEPROM

To write an EEPROM data location, the following

sequen ce must be followed :

1. Erase data EEPROM word.

a) Select word, data EEPROM erase, and set

WREN bit in NVMCO N regis ter.

b) Write address of word to be erased into

NVMADR.

c) Enable NVM interrupt (optional).

d) Write ‘55’ to NVMKEY.

e) Write ‘AA’ to NVMKEY.

f) Set the WR bit. This will begin erase cycle.

g) Either poll NVMIF bit or wait for NVMIF

interrupt.

h) The WR bit is cle ared whe n the era se cy cle

ends.

2. Write data word into data EEPROM write

latches.

3. Program 1 data word into data EEPROM.

a) Select word, data EEPROM program, and

set WREN bit in NVMCON register.

b) Enable NVM writ e don e inte rrupt (optio nal).

c) Write ‘55’ to NVMKEY.

d) Write ‘AA’ to NVMKEY.

e) Set the WR bit. This will begin program

cycle.

f) Either poll NVMIF bit or wait for NVM

interrupt.

g) The WR bit is cleared when the write cycle

ends.

The write will not initiate if the above sequence is not

exactl y followed (write 0x55 to NVMKEY, write 0xAA to

NVMCON, then set WR bit) for each word. It is strongly

recommended that interrupts be disabled during this

code segment.

Additionally, the WREN bit in NVMCON must be set to

enable writes. This mechanism prevents accidental

writes to data EEPROM due to unexpected code exe-

cution. The WREN bit should be kept clear at all times

except when updating the EEPROM. The WREN bit is

not cleared by hardware.

After a write sequence has been initiated, clearing the

WREN bit wil l not affect the current write cycle. The WR

bit will be inhibited from being set unless the WREN bit

is set. The WREN bit must be set o n a previous instruc -

tion. Both WR a nd WREN c an not be se t with th e s am e

instruction.

At the completion of the write cycle, the WR bit is

cleared in hardware and the Non-Volatile Memory

Write Complete Interrupt Flag bit (NVMIF) is set. The

user may either enable this interrupt or poll this bit.

NVMIF must be cleared by software.

7.3.1 WRITING A WORD OF DATA

EEPROM

Once the user has erased the word to be programme d,

then a table write instruction is used to write one write

latch, as shown in Example 7-4.

EXAMPLE 7-4: DATA EEPROM WORD WRITE

; Point to data memory

MOV #LOW_ADDR_WORD,W0 ; Init pointer

MOV #HIGH_ADDR_WORD,W1

MOV W1,TBLPAG

MOV #LOW(WORD),W2 ; Get data

TBLWTL W2,[ W0] ; Write data

; The NVMADR captures last table access address

; Select data EEPROM for 1 word op

MOV #0x4004,W0

MOV W0,NVMCON

; Operate key to allow write operation

DISI #5 ; Block all interrupts with priority <7 for

; next 5 instructions

MOV #0x55,W0

MOV W0,NVMKEY ; Write the 0x55 key

MOV #0xAA,W1

MOV W1,NVMKEY ; Write the 0xAA key

BSET NVMCON,#WR ; Initiate program sequence

NOP

; Write cycle will complete in 2mS. CPU is not stalled for the Data Write Cycle

; User can poll WR bit, use NVMIF or Timer IRQ to determine write complete

dsPIC30F6011/6012/6013/6014

7.3.2 WRITING A BLOCK OF DATA

EEPROM

To write a block of data EEPROM, write to all sixteen

latches first, then set the NVMCON register and

progra m the block .

EXAMPLE 7-5: DATA EEPROM BLOCK WRITE

MOV #LOW_ADDR_WORD,W0 ; Init pointer

MOV #HIGH_ADDR_WORD,W1

MOV W1,TBLPAG

MOV #data1,W2 ; Get 1st data

TBLWTL W2,[ W0]++ ; write data

MOV #data2,W2 ; Get 2nd data

TBLWTL W2,[ W0]++ ; write data

MOV #data3,W2 ; Get 3rd data

TBLWTL W2,[ W0]++ ; write data

MOV #data4,W2 ; Get 4th data

TBLWTL W2,[ W0]++ ; write data

MOV #data5,W2 ; Get 5th data

TBLWTL W2,[ W0]++ ; write data

MOV #data6,W2 ; Get 6th data

TBLWTL W2,[ W0]++ ; write data

MOV #data7,W2 ; Get 7th data

TBLWTL W2,[ W0]++ ; write data

MOV #data8,W2 ; Get 8th data

TBLWTL W2,[ W0]++ ; write data

MOV #data9,W2 ; Get 9th data

TBLWTL W2,[ W0]++ ; write data

MOV #data10,W2 ; Get 10th data

TBLWTL W2,[ W0]++ ; write data

MOV #data11,W2 ; Get 11th data

TBLWTL W2,[ W0]++ ; write data

MOV #data12,W2 ; Get 12th data

TBLWTL W2,[ W0]++ ; write data

MOV #data13,W2 ; Get 13th data

TBLWTL W2,[ W0]++ ; write data

MOV #data14,W2 ; Get 14th data

TBLWTL W2,[ W0]++ ; write data

MOV #data15,W2 ; Get 15th data

TBLWTL W2,[ W0]++ ; write data

MOV #data16,W2 ; Get 16th data

TBLWTL W2,[ W0]++ ; write data. The NVMADR captures last table access address.

MOV #0x400A,W0 ; Select data EEPROM for multi word op

MOV W0,NVMCON ; Operate Key to allow program operation

DISI #5 ; Block all interrupts with priority <7 for

; next 5 instructions

MOV #0x55,W0

MOV W0,NVMKEY ; Write the 0x55 key

MOV #0xAA,W1

MOV W1,NVMKEY ; Write the 0xAA key

BSET NVMCON,#WR ; Start write cycle

NOP

dsPIC30F6011/6012/6013/6014

7.4 Write Verify

Depending on the application, good programming

practice may dictate that the value written to the mem-

ory should be verified against the original value. This

should be used in applications where excessive writes

can stress bits near the specification limit.

7.5 Protection Against Spurious W ri te

There are conditions when the device may not want to

write to the data EEPROM memory. To protect against

spurious EEPROM writes, various mechanisms have

been built-in. On power-up, the WREN bit is cleared;

also, the Power-up Ti mer prevents EEPROM write.

The writ e in iti ate sequence an d the WR EN bi t tog eth er

help prevent an accidental write during brown-out,

power glitch, or software malfunction.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

8.0 I/O PORTS

All of the device pins (except VDD, VSS, MCLR and

OSC1/CLKI) are shared between the peripherals and

the parallel I/O ports.

All I/O input ports feature Schmitt Trigger inputs for

improved noise immunity.

8.1 P a ra l le l I/O (PIO) Po rts

When a peripheral is enabled and the peripheral is

actively driving an associated pin, the use of the pin as

a general purpose output pin is disabled. The I/O pin

may b e read but t he output dri ver for the parallel port bit

will be disabled. If a peripheral is enabled but the

peripheral is not actively driving a pin, that pin may be

driven by a port.

All port pins have three registers directly associated

with the operation of the port pin. The Data Direction

or an output. If the data direction bit is a ‘1’, t hen the pin

is an input. All port pins are defined as inputs after a

Reset. Reads from the latch (LATx), read the latch.

Writes to the latch, write the latch (LATx). Reads from

the port (PORTx), read the port pins and writes to the

port pins, write the latch (LATx).

Any bit and its associated data and control registers

that are not valid for a particular device will be dis-

abled. Th at m ean s the correspo ndi ng LATx and TRISx

registers and the port pin will read as zeros.

When a pin is shared with another peripheral or func-

tion that is defined as an input only, it is nevertheless

regarded as a dedicated port because there is no

other competing source of outputs. An example is the

INT4 pin.

The format of the registers for PORTA are shown in

Table 8-1.

The TRISA (Data Direction Control) register controls

the direction of the RA<7:0> pins, as well as the INTx

pins and the VREF pins. The LATA register supplies

data to the outputs and is readable/writable. Reading

the PORTA register yields the state of the input pins,

while writing the PORTA register modifies the contents

of the LATA register.

A parallel I/O (PIO) port that shares a pin with a periph-

eral is, in general, subservient to the peripheral. The

peripheral’s output buffer data and control signals are

provided to a pair of multiplexers. The multiplexers

select whether the peripheral or the associated port

has own ership of the outp ut dat a and co ntrol si gnals of

the I/O pad cell. Figure 8-2 shows how ports are shared

with oth er perip herals and the a ssociat ed I/O c ell (p ad)

to which they are connected. Table 8-2 through

Table 8-9 show the formats of the registers for the

shared ports, PORTB through PORTG.

FIGURE 8-1: BLOCK DIAGRAM OF A DEDICATED PORT STRUCTURE

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

Note: The actual bits in use vary between

devices.

WR LAT +

TRIS Latch

I/O Pad

WR Port

Data Bus

Data Latch

Read LAT

Read Port

Read TRIS

WR TRIS

I/O Cell

Dedicated Port Module

dsPIC30F6011/6012/6013/6014

8.2 Configur ing Analog Port Pins

The use of the ADPC FG and TRIS registers control the

operation of the A/D port pins. The port pins that are

desired as analog inputs must have their correspond-

ing TRIS bit set (input). If the TRIS bit is cleared (out-

put), the digital output level (VOH or VOL) will be

converted.

When reading the Port register, all pins configured as

analog input channels will read as cleared (a low level).

Pins configured as digital inp uts will not convert an ana-

log input. Analog levels on any pin that is defined as a

digital input (including the ANx pins) may cause the

input buffer to consume current that exceeds the

device specifications.

FIGURE 8-2: BLOCK DIAGRAM OF A SHARED PORT STRUCTURE

WR LAT +

TRIS Latch

I/O Pad

WR Port

Data Bus

Data Latch

Read LA T

Read Port

Read TRIS

WR TRIS

Peripheral Output Data Output Enable

Peripheral Input Data

I/O Ce l l

Peripheral Module

Peripheral Output Enable

PIO Module

Output Multiplexers

Output Data

Input Data

Peripheral Module Enable

dsPIC30F6011/6012/6013/6014

TABLE 8-1: PORTA REGISTER MAP FOR dsPIC30F6013/6014

TABLE 8-2: PORTB REGISTER MAP FOR dsPIC30F6011/6012/6013/6014

TABLE 8-3: PORTC REGISTER MAP FOR dsPIC30F6011/6012

TABLE 8-4: PORTC REGISTER MAP FOR dsPIC30F6013/6014

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TRISA 02C0 TRISA15 TRISA14 TRISA13 TRISA12 — TRISA10 TRISA9 — TRISA7 TRISA6 — — — — — — 1111 0110 1100 0000

PORTA 02C2 RA15 RA14 RA13 RA12 — RA10 RA9 —RA7RA6 — — — — — — 0000 0000 0000 0000

LATA 02C4 LATA15 LATA14 LATA13 LATA12 — LATA10 LATA9 —LATA7LATA6 — — — — — — 0000 0000 0000 0000

Note 1: PORTA is not implemented in the dsPIC30F6011/6012 devices.

2: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr . Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TRISB 02C6 TRISB15 TRISB14 TRISB13 TRISB12

TRISB11

TRISB10 TRISB9 TRISB8 TRISB7 TRISB6 TRISB5 TRISB4 TRISB3 TRISB2 TRISB1 TRISB0 1111 1111 1111 1111

PORTB 02C8 RB15 RB14 RB13 RB12 RB11 RB10 RB9 RB8 RB7 RB6 RB5 RB4 RB3 RB2 RB1 RB0 0000 0000 0000 0000

LATB 02CB LATB15 LATB14 LATB13 LATB12 LATB11 LATB10 LATB9 LATB8 LATB7 LATB6 LATB5 LATB4 LATB3 LATB2 LATB1 LATB0 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TRISC 02CC TRISC15 TRISC14 TRISC13 — — — — — — — — — — TRISC2 TRISC1 —1110 0000 0000 0110

PORTC 02CE RC15 RC14 RC13 — — — — — — — — — — RC2 RC1 —0000 0000 0000 0000

LATC 02D0 LATC15 LATC14 LATC13 — — — — — — — — — —LATC2LATC1—0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TRISC 02CC TRISC15 TRISC14 TRISC13 — — — — — — — — TRISC4 TRISC3 TRISC2 TRISC1 —1110 0000 0001 1110

PORTC 02CE RC15 RC14 RC13 — — — — — — — — RC4 RC3 RC2 RC1 —0000 0000 0000 0000

LATC 02D0 LATC15 LATC14 LATC13 — — — — — — — — LATC4 LATC3 LATC2 LATC1 —0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

TABLE 8-5: PORTD REGISTER MAP FOR dsPIC30F6011/6012

TABLE 8-6: PORTD REGISTER MAP FOR dsPIC30F6013/6014

TABLE 8-7: PORTF REGISTER MAP FOR dsPIC30F6011/6012

TABLE 8-8: PORTF REGISTER MAP FOR dsPIC30F6013/6014

TABLE 8-9: PORTG REGISTER MAP FOR dsPIC30F6011/6012/6013/6014

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TRISD 02D2 — — — —

TRISD11

TRISD10 TRISD9 TRISD8 TRISD7 TRISD6 TRISD5 TRISD4 TRISD3 TRISD2 TRISD1 TRISD0 0000 1111 1111 1111

PORTD 02D4 — — — — RD11 RD10 RD9 RD8 RD7 RD6 RD5 RD4 RD3 RD2 RD1 RD0 0000 0000 0000 0000

LATD 02D6 — — — — LATD11 LATD10 LATD9 LATD8 LATD7 LATD6 LATD5 LATD4 LATD3 LATD2 LATD1 LATD0 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TRISD 02D2 TRISD15 TRISD14 TRISD13 TRISD12

TRISD11

TRISD10 TRISD9 TRISD8 TRISD7 TRISD6 TRISD5 TRISD4 TRISD3 TRISD2 TRISD1 TRISD0 1111 1111 1111 1111

PORTD 02D4 RD15 RD14 RD13 RD12 RD11 RD10 RD9 RD8 RD7 RD6 RD5 RD4 RD3 RD2 RD1 RD0 0000 0000 0000 0000

LATD 02D6 LATD15 LATD14 LATD13 LATD12 LATD11 LATD10 LATD9 LATD8 LATD7 LATD6 LATD5 LATD4 LATD3 LATD2 LATD1 LATD0 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TRISF 02DE — — — — — — — — — TRISF6 TRISF5 TRISF4 TRISF3 TRISF2 TRISF1 TRISF0 0000 0000 0111 1111

PORTF 02E0 — — — — — — — — — RF6 RF5 RF4 RF3 RF2 RF1 RF0 0000 0000 0000 0000

LATF 02E2 — — — — — — — — — LATF6 LATF5 LATF4 LATF3 LATF2 LATF1 LATF0 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TRISF 02DE — — — — — — — TRISF8 TRISF7 TRISF6 TRISF5 TRISF4 TRISF3 TRISF2 TRISF1 TRISF0 0000 0001 1111 1111

PORTF 02E0 — — — — — — — RF8 RF7 RF6 RF5 RF4 RF3 RF2 RF1 RF0 0000 0000 0000 0000

LATF 02E2 — — — — — — — LATF8 LATF7 LATF6 LATF5 LATF4 LATF3 LATF2 LATF1 LATF0 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 1 1 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TRISG 02E4 TRISG15 TRISG14 TRISG13 TRISG12 —— TRISG9 TRISG8 TRISG7 TRISG6 —— TRISG3 TRISG2 TRISG1 TRISG0 1111 0011 1100 1111

PORTG 02E6 RG15 RG14 RG13 RG12 — — RG9 RG8 RG7 RG6 — — RG3 RG2 RG1 RG0 0000 0000 0000 0000

LATG 02E8 LATG15 LATG14 LATG13 LATG12 —— LATG9 LATG8 LATG7 LATG6 —— LATG3 LATG2 LATG1 LATG0 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

8.3 Input Change Notification Module

The input change notification module provides the

dsPIC30F devices the ability to generate interrupt

requests to the processor, in response to a change of

state on selected input pins. This module is capable of

detecting input change of states even in Sleep mode,

when the cl ocks are disabled. The re are up to 24 exter-

nal signals (CN0 through CN23) that may be selected

(enabled) for generating an interrupt request on a

change of state.

TABLE 8-10:

INPUT C HANGE N OTIFIC ATION REG ISTER MA P FOR dsPIC 30F6011/6012 (BIT S 15-8)

TABLE 8-1 1: INPUT CHANGE NOTIFICATION REGISTER MAP FOR dsPIC30F601 1/6012 (BITS 7-0)

TABLE 8-12: INPUT CHANGE NOTIFICATION REGISTER MAP FOR dsPIC30F6013/6014 (BIT S 15-8)

T ABLE 8-13: INPUT CHANGE NOTIFICATION REGISTER MAP FOR dsPIC30F6013/6014 (BITS 7-0)

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Reset State

CNEN1 00C0 CN15IE CN14IE CN13IE CN12IE CN11IE CN10IE CN9IE CN8IE 0000 0000 0000 0000

CNEN2 00C2 — — — — — — — — 0000 0000 0000 0000

CNPU1 00C4 CN15PUE CN14PUE CN13PUE CN12PUE CN11PUE CN10PUE CN9PUE CN8PUE 0000 0000 0000 0000

CNPU2 00C6 — — — — — — — — 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

CNEN1 00C0 CN7IE CN6IE CN5IE CN4IE CN3IE CN2IE CN1IE CN0IE 0000 0000 0000 0000

CNEN2 00C2 ————— CN18IE CN17IE CN16IE 0000 0000 0000 0000

CNPU1 00C4 CN7PUE CN6PUE CN5PUE CN4PUE CN3PUE CN2PUE CN1PUE CN0PUE 0000 0000 0000 0000

CNPU2 00C6 ————— CN18PUE CN17PUE CN16PUE 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Reset State

CNEN1 00C0 CN15IE CN14IE CN13IE CN12IE CN11IE CN10IE CN9IE CN8IE 0000 0000 0000 0000

CNEN2 00C2 — — — — — — — — 0000 0000 0000 0000

CNPU1 00C4 CN15PUE CN14PUE CN13PUE CN12PUE CN11PUE CN10PUE CN9PUE CN8PUE 0000 0000 0000 0000

CNPU2 00C6 — — — — — — — — 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

CNEN1 00C0 CN7IE CN6IE CN5IE CN4IE CN3IE CN2IE CN1IE CN0IE 0000 0000 0000 0000

CNEN2 00C2 CN23IE CN22IE CN21IE CN20IE CN19IE CN18IE CN17IE CN16IE 0000 0000 0000 0000

CNPU1 00C4 CN7PUE CN6PUE CN5PUE CN4PUE CN3PUE CN2PUE CN1PUE CN0PUE 0000 0000 0000 0000

CNPU2 00C6 CN23PUE CN22PUE CN21PUE CN20PUE CN19PUE CN18PUE CN17PUE CN16PUE 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

9.0 TIMER1 MODULE

This section describes the 16-bit General Purpose

Timer1 module and associated operational modes.

Figure 9-1 depicts the simplified block diagram of the

16-bit Ti mer1 module.

The following sections provide a detailed description

including setup and control registers, along with asso-

ciated block diagrams for the operational modes of the

timers.

The T imer1 mo dule is a 16-bit timer which can serv e as

the time count er for the rea l-time clo ck, o r operate as a

free-running interval timer/counter . The 16-bit timer has

the following modes:

• 16-bit Ti mer

• 16-bit Synchronous Counter

• 16-bit Asynchronous Counter

Further, the following operational characteristics are

supported:

• Timer gate operation

• Selectable prescaler set tings

• Timer operation during CPU Idle and Sleep

modes

• Interrupt on 16-bit Period register match or falling

edge of external gate signal

These Operating modes are determined by setting the

appropriate bit(s) in the 16-bit SFR, T1CON. Figure 9-1

presents a bloc k diagram of the 16-bit timer modu le.

16-bit T imer Mode: In t he 16-bi t T imer m ode, the timer

increments on every instruction cycle up to a match

value preloaded into the Period register PR1, then

resets to ‘0’ and continues to count.

When the CPU goes into the Idle mode, the timer will

stop incrementing unless the TSIDL (T1CON<13>)

bit = 0. If TSIDL = 1, the timer m odule logi c will resum e

the incrementing sequence upon termination of the

CPU Idle mode.

16-bit Synchronous Counter Mode: In the 16-bit

Synchronous Counter mode, the timer increments on

the rising edge of the applied external clock signal

which is synchronized with the internal phase clocks.

The timer counts up to a match value preloaded in PR1,

then resets to ‘0’ and continues.

When the CPU goes into the Idle mode, the timer will

stop incrementing unless the respective TSIDL bit = 0.

If TSIDL = 1, the timer module logic will resume the

incrementing sequence upon termination of the CPU

Idle mode.

16-bit Asynchronous Counter Mode: In the 16-bit

Asynchronous Counter mode, the timer increments on

every rising edge of the applied external clock signal.

The timer counts up to a match value preloaded in PR1,

then resets to ‘0’ and continues.

When the timer is configured for the Asynchronous

mode of operation and the CPU goes into the Idle

mode, the timer will stop incrementing if TSIDL = 1.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

dsPIC30F6011/6012/6013/6014

FIGURE 9-1: 16-BIT TIMER1 MODULE BLOCK DIAGRAM

9.1 Timer Gate Operation

The 16-bi t timer can be pl aced in the Ga ted Ti me Accu-

mulation mode. This mode allows the internal TCY to

increm ent the respec tive timer when the gate input si g-

nal (T1CK pin) is asserted high. Control bit TGATE

(T1CON<6>) must be set to enable this mode. The

timer must be enabled (TON = 1) and the timer clock

source se t to interna l (TCS = 0).

When the CPU goes into the Idle mode, the timer will

stop incrementing unless TSIDL = 0. If TSIDL = 1, the

timer will resume the incrementing sequence upon

termination of the CPU Idle mode.

9.2 Timer Prescaler

The input clock (FOSC/4 or external clock) to the 16-bit

T imer has a pre scale optio n of 1:1, 1:8, 1:64 a nd 1:256,

selected by control bits TCKPS<1:0> (T1CON<5:4>).

The prescaler counter is cleared when any of the

following occurs:

• a write to the TMR1 register

• a write to the T1CON register

• device Reset, su ch as POR and BOR

However, if the timer is disabled (TON = 0), then the

timer prescaler cannot be reset since the prescaler

clock is halted.

TMR1 is not cleared when T1CON is written. It is

cleared by writin g to the TMR1 register.

9.3 Timer Operation During Sleep

Mode

During CPU Sleep mode, the timer will operate if:

• The timer module is enabled (TON = 1) and

• The timer clock s ource is selected as extern al

(TCS = 1) and

• The TSYNC bit (T1CON<2>) is asser ted to a logic

‘0’ which defines the external clock source as

asynchronous.

When all three conditions are true, the timer will con-

tinue to count up to the Period register and be reset to

0x0000.

When a ma tch betwe en the tim er and th e Period re gis-

ter occurs, an interrupt can be generated if the

respective timer interrupt enable bit is asserted.

TON

Sync

SOSCI

SOSCO/

PR1

T1IF

Equal Comparator x 16

TMR1

Reset

LPOSCEN

Event Flag

TSYNC

TGATE

TCKPS<1:0>

Prescaler

1, 8, 64, 256

TGATE

TCY

T1CK

TCS

1 x

0 1

TGATE

0 0

Gate

Sync

dsPIC30F6011/6012/6013/6014

9.4 Timer Interrupt

The 16 -bit timer has the a bility to generate an interrupt on

period match. When the timer count matches the Period

generated if enabled. The T1IF bit must be cleared in

software. The timer interrupt flag, T1IF, is located in the

IFS0 Control register in the interrupt controller .

When the Gated Time Accumulation mode is enabled,

an interr upt will al so be generat ed on the f alling edge of

the gate signal (at the end of the accumulation cycle).

Enabling an interrupt is accomplished via the respec-

tive timer interrupt enable bit, T1IE. The timer interrupt

enable bit is located in the IEC0 Control register in the

inter rupt co ntro lle r.

9.5 Real-Time Clock

Timer1, when operating in Real-Time Clock (RTC)

mode, provides time of day and event time-stamping

capabilities. Key operational features of the RTC are:

• Operation from 32 kHz LP oscillator

• 8-bit prescaler

• Low power

• Real-Time Clock interrupts

These Operating modes are determined by setting the

appropriate bit(s) in the T1CON Control register.

FIGURE 9-2: RECOMME NDED

COMPONENTS FOR

TI MER1 LP OSCILLATOR

RTC

9.5.1 RTC OSCILLATOR OPERATION

When the TON = 1, T CS = 1 an d TGATE = 0, the timer

increme nt s on the risin g e dge of the 32 kHz LP oscill a-

tor output sig nal, up to the val ue specified in the Period

The TSYNC bit must be asserted to a logic ‘0’

(Asynchronous mode) for correct operation.

Enabling LPOSCEN (OSCCON<1>) will disable the

normal Timer and Counter modes and enable a timer

carry-out wake-up event.

When the CPU enters Sleep mode, the RTC will con-

tinue to operate provided the 32 kHz external crystal

oscillator is active and the control bits have not been

changed. The TSIDL bit should be cleared to ‘0’ in

order for R TC to contin ue ope rati on in Idle mode .

9.5.2 RTC INTERRUPTS

When an interrupt event oc curs, the respectiv e interrupt

flag, T1IF, is asserted and an interrupt will be generated

if enabled. The T1IF bit must be cleared in software. The

respective Timer interrupt flag, T1IF, is located in the

IFS0 Status re gister in the interrupt controller.

Enabling an interrupt is accomplished via the respec-

tive timer interrupt enable bit, T1IE. The timer interrupt

enable bit is located in the IEC0 Control register in the

interrupt con trol le r.

SOSCI

SOSCO

dsPIC30FXXXX

32.768 kHz

XTAL

C1 = C2 = 18 pF; R = 100K

dsPIC30F6011/6012/6013/6014

TABLE 9-1: TIMER1 REGISTER MAP

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TMR1 0100 Timer1 Register uuuu uuuu uuuu uuuu

PR1 0102 Period Regis ter 1 1111 1111 1111 1111

T1CON 0104 TON —TSIDL— — — — — — TGATE TCKPS1 TCKPS0 —TSYNCTCS —0000 0000 0000 0000

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

10.0 TIMER2/3 MODULE

This section describes the 32-bit General Purpose

Timer module (Timer2/3) and associated operational

modes. Figure 10-1 depicts the simplified block dia-

gram of the 32-bit Timer2/3 module. Figure 10-2 and

Figure 10-3 show Timer2/3 configured as two

independent 16-bit timers, Timer2 and Timer3,

respectively.

The Timer2/3 module is a 32-bit timer (which can be

configured as two 16-bit timers) with selectable

operating modes. These timers are utilized by other

periphe ral modul es, such as:

• Input Capture

• Output Compare/Simpl e PWM

The following sections provide a detailed description,

including setup and control registers, along with asso-

ciated block diagrams for the operational modes of the

timers.

The 32-bit timer has the following modes:

• Two independent 16-bit timers (Timer2 and

Tim er3) with all 16 -bit operating mode s (except

Asynchronous Counter mode)

• Single 32-bit timer operation

• Single 32-bit synchronous counter

Further, the following operational characteristics are

supported:

• AD C event trigger

• Timer gate operation

• Selectable prescaler set tings

• Timer operation during Idle and Sleep modes

• Interrupt on a 32-bit peri od register match

These Operating modes are determined by setting the

appropriate bit(s) in the 16-bit T2CON and T3CON

SFRs.

For 32-bit timer/counter operation, Timer2 is the least

significant word and T imer3 is the most significant word

of the 32-bit timer.

16-bit Timer Mode: In the 16-bit mode, Timer2 and

Timer3 can be configured as two independent 16-bit

timers. Each timer can be set up in either 16-bit Timer

mode or 16-bit Synchronous Counter mode. See

Section 9.0 “Timer1 Module”, Timer1 Module for

details on these two Operating modes.

The only functional difference between Timer2 and

Timer3 is that Timer2 provides synchronization of the

clock prescal er output. This is usefu l for high frequenc y

external clock inputs.

32-bit T imer Mode: In t he 32-bi t T imer m ode, the timer

increments on every instruction cycle, up to a match

value preloaded into the combined 32-bit Period

count.

For synchronous 32-bit reads of the Timer2/Timer3

pair, reading the least significant word (TMR2 register)

will cause the most significant word (msw) to be read

and latched into a 16-bit holding register, termed

TMR3HLD.

For synchronous 32-bit writes, the holding register

(TMR3HLD) must first be written to. When followed by

a write to the TMR2 re gister, the content s of TM R3HLD

will be transferred and latched into the MSB of the

32-bit timer (TMR3).

32-bit Synchronous Counter Mode: In the 32-bit

Synchronous Counter mode, the timer increments on

the rising edge of the applied external clock signal

which is synchronized with the internal phase clocks.

The timer counts up to a match value preloaded in the

combined 32-bit period register PR3/PR2, then resets

to ‘0’ and continues.

When the timer is configured for the Synchronous

Counter mode of operation and the CPU goes into the

Idle mode, the timer will stop incrementing unless the

TSIDL (T2CON<13>) bit = 0. If TSIDL = 1, the timer

module logic will resume the incrementing sequence

upon termination of the CPU Idle mode.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

Note: For 32-bit timer operation, T3CON control

bits are ignored. Only T2CON control bits

are used for setup and control. Timer2

clock and gate inputs are utilized for the

32-bit tim er module but an in terrupt is gen-

erated w ith the T imer3 interru pt flag (T3 IF)

and the interrupt is enabled with the

Timer3 interrupt enable bit (T3IE).

dsPIC30F6011/6012/6013/6014

FIGURE 10-1: 32-BIT TIMER2/3 BLOCK DIAGRAM

TMR3 TMR2

T3IF

Equal Comparator x 32

PR3 PR2

Reset

LSB MSB

Event Flag

Note: Timer Configuration bit T32 (T2CON<3>) must be set to ‘1’ for a 32-bit timer/counter operation. All control

bits are respective to the T2CON register.

Data Bus<15:0>

Read TMR2

Write TMR2 16

TGATE ( T2 CON<6>)

(T2CON<6>)

TGATE

TON TCKPS<1:0>

TCY

TCS

1 x

0 1

TGATE

0 0

Gate

T2CK

Sync

ADC Event Trigger

Sync

TMR3HLD

Prescaler

1, 8, 64, 256

dsPIC30F6011/6012/6013/6014

FIGURE 10-2: 16- BIT TI MER2 BLOCK DIAGRAM

FIGURE 10-3: 16- BIT TI MER3 BLOCK DIAGRAM

TON

Sync

PR2

T2IF

Equal Comparator x 16

TMR2

Reset

Event Flag TGATE

TCKPS<1:0>

TGATE

TCY

TCS

1 x

0 1

TGATE

0 0

Gate

T2CK

Sync Prescaler

1, 8, 64, 256

TON

PR3

T3IF

Equal Comparator x 16

TMR3

Reset

Event Flag TGATE

TCKPS<1:0>

TGATE

TCY

TCS

1 x

0 1

TGATE

0 0

T3CK

ADC Event Trigger

Sync

Prescaler

1, 8, 64, 256

dsPIC30F6011/6012/6013/6014

10.1 Timer Gate Operation

The 32-bi t timer can be pl aced in the Ga ted Ti me Accu-

mulation mode. This mode allows the internal TCY to

increm ent the respec tive timer when the gate input si g-

nal (T2CK pin) is asserted high. Control bit TGATE

(T2CO N<6>) mus t be set to en able this mode . When in

this mode, Timer2 is the originating clock source. The

TGATE setting is ignored for T imer3 . The timer must b e

enabled (TON = 1) and the timer clock source set to

internal (TCS = 0).

The falling edge of the external signal terminates the

count operation but does not reset the timer. The user

must reset the timer in order to start counting from zero.

10.2 ADC Event Trigger

When a matc h occurs betwe en the 32-bit timer (TM R3/

TMR2) and the 32-bit combined period register (PR3/

PR2), or be twee n the 16-b it ti me r TM R3 and the 16-b it

period re gister PR3 , a spe cial ADC tri gger ev ent si gnal

is generated by Timer3.

10.3 Timer Prescaler

The in put cloc k (FOSC/4 or external clock) to the timer

has a prescale option of 1:1, 1:8, 1:64, and 1:256,

selected by control bits TCKPS<1:0> (T2CON<5:4>

and T3CON<5:4>). For the 32-bit timer operation, the

origina ting clock so urce is Timer2. Th e prescale r oper-

ation for Timer3 is not applicable in this mode. The

prescaler counter is cleared when any of the following

occurs:

• a write to the TMR2/TMR3 register

• a write to the T2CON/T3CON register

• device Reset, su ch as POR and BOR

However, if the timer is disabled (TON = 0), then the

Timer 2 prescaler cannot be reset since the prescaler

clock is halted.

TMR2/TMR3 is not cleared when T2CON/T3CON is

written.

10.4 Timer Operation During Sleep

Mode

During CPU Sleep mode, the timer will not operate

because the internal clocks are disabled.

10.5 Timer Interrupt

The 32-bit timer module can generate an interrupt on

period ma tch or on the fall ing edg e of the ext ernal ga te

signal. When the 32-bit timer count matches the

respective 32-bit period register, or the falling edge of

the external “gate” signal is detected, the T3IF bit

(IFS0<7>) is asserted and an interrupt will be gener-

ated if enabled. In this mode, the T3IF interrupt flag is

used as the source of the interrupt. The T3IF bit must

be cleared in sof tw are.

Enabling an interrupt is accomplished via the

respective timer interrupt enable bit, T3IE (IEC0<7>).

dsPIC30F6011/6012/6013/6014

TABLE 10-1: TIMER2/3 REGISTER MAP

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 1 1 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

TMR2 0106 Timer2 Register uuuu uuuu uuuu uuuu

TMR3HLD 0108 Timer3 Holding Register (for 32-bit timer operations only) uuuu uuuu uuuu uuuu

TMR3 010A Time r3 Register uuuu uuuu uuuu uuuu

PR2 010C Period Register 2 1111 1111 1111 1111

PR3 010E Period Register 3 1111 1111 1111 1111

T2CON 0110 TON —TSIDL— — — — — — TGATE TCKPS1 TCKPS0 T32 —TCS —0000 0000 0000 0000

T3CON 0112 TON —TSIDL— — — — — — TGATE TCKPS1 TCKPS0 ——TCS —0000 0000 0000 0000

Legend: u = uninitialized bit

Note: Refer to dsPIC30F Family Reference Manual (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

11.0 TIMER4/5 MODULE

This section describes the second 32-bit General Pur-

pose Timer module (Timer4/5) and associated opera-

tional modes. Figure 11-1 depicts the simplified block

diagram of the 32-bit Timer4/5 module. Figure 1 1-2 and

Figure 11-3 show Timer4/5 c onf igured as tw o ind epe n-

dent 16-bit timers, Timer4 and Timer5, respectively.

The Timer4/5 module is similar in operation to the

T imer2/3 module. Howe ver , there ar e some diff erences

which are as follows:

• The Timer4/5 module does not support the ADC

event trigger feature

• Timer4/5 can not be utilized by other peripheral

modules, such as input capture and

output compare

The oper ating modes of the T imer4/5 module are deter-

mined by setting the appropriate bit(s) in the 16-bit

T4CON and T5CON SFRs.

For 32-bit timer/counter operation, Timer4 is the lsw

and Timer5 is the msw of the 32-bit timer.

FIGURE 11-1: 32-BIT TIMER4/5 BLOCK DIAGRAM

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

Note: For 32-bit timer operation, T5CON control

bits are ignored. Only T4CON control bits

are used for setup and control. Timer4

clock and gate inputs are utilized for the

32-bit tim er module but an in terrupt is gen-

erated with the T imer5 int errupt flag (T5IF)

and the interrupt is enabled with the

Timer5 interrupt enable bit (T5IE).

TMR5 TMR4

T5IF

Equal Comparator x 32

PR5 PR4

Reset

LSB

MSB

Event Flag

Note: Timer Configuration bit T45 (T4CON<3>) must be set to ‘1’ for a 32-bit timer/counter operation. All control

bits are respective to the T4CON register.

Data Bus<15:0>

TMR5HLD

Read TMR4

Write TM R4 16

TGATE (T4CON<6>)

(T4CON<6>)

TGATE

TON TCKPS<1:0>

Prescaler

1, 8, 64, 256

TCY

TCS

1 x

0 1

TGATE

0 0

Gate

T4CK

Sync

dsPIC30F6011/6012/6013/6014

FIGURE 11-2: 16-BIT TIMER4 BLOCK DIAGRAM

FIGURE 11-3: 16-BIT TIMER5 BLOCK DIAGRAM

TON

Sync

PR4

T4IF

Equal Comparator x 16

TMR4

Reset

Event Flag TGATE

TCKPS<1:0>

Prescaler

1, 8, 64, 256

TGATE

TCY

TCS

1 x

0 1

TGATE

0 0

Gate

T4CK

Sync

TON

PR5

T5IF

Equal Comparator x 16

TMR5

Reset

Event Flag TGATE

TCKPS<1:0>

Prescaler

1, 8, 64, 256

TGATE

TCY

TCS

1 x

0 1

TGATE

0 0

T5CK

ADC Event Trigger

Sync

Note: In the dsPIC30F6011 and dsPIC30F6012 devices, there is no T5CK pin. Therefore, in this device the

following modes should not be used for Timer5:

1: TCS = 1 (16-bit counter)

2: TCS = 0, TGATE = 1 (Gated Time Accumulation)

dsPIC30F6011/6012/6013/6014

TABLE 11-1: TIMER4/5 REGISTER MAP

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset St ate

TMR4 0114 T imer 4 Register uuuu uuuu uuuu uuuu

TMR5HLD 0116 Timer 5 Holding Register (for 32-bit operations only) uuuu uuuu uuuu uuuu

TMR5 0118 T imer 5 Register uuuu uuuu uuuu uuuu

PR4 011A Period Register 4 1111 1111 1111 1111

PR5 011C Period Register 5 1111 1111 1111 1111

T4CON 011E TON —TSIDL— — — — — — TGATE TCKPS1 TCKPS0 T45 —TCS—0000 0000 0000 0000

T5CON 0120 TON —TSIDL— — — — — — TGATE TCKPS1 TCKPS0 ——TCS—0000 0000 0000 0000

Legend: u = uninitialized

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

12.0 INPUT CAPTURE MODULE

This section describes the input capture module and

associated operational modes. The features provided

by this module are useful in applications requiring fre-

quency (period) and pulse measurement. Figure 12-1

depicts a block diagram of the input capture module.

Input capture is useful for such modes as:

• Frequency/Period/Pulse Measurements

• Additional Sources of External Interrupts

The key operational features of the input capture

module are:

• Simple Capture Event mode

• Timer2 and Timer3 mode selection

• Interrupt on input capture event

These operating modes are determined by setting the

appropriate bits in the ICxCON register (where

x = 1,2,...,N). The dsPIC DSC devices contain up to 8

capture channels (i.e., the maximum value of N is 8).

12.1 Simple Capture Event Mode

The simple capture events in the dsPIC30F product

family are:

• Capture every falling edge

• Capture every rising edge

• Capture every 4th rising edge

• Capture every 16th rising edge

• Capture every rising and falling edge

These simple Input Capture modes are configured by

setting the appropriate bits ICM<2:0> (ICxCON<2:0>).

12.1.1 CAPTURE PRESCALER

There are four input capture prescaler settings speci-

fied by bits ICM<2:0> (ICxCON<2:0>). Whenever the

capture c hanne l is turn ed of f, the pre scaler co unter w ill

be cleared. In addition, any Reset will clear the

prescaler counter.

FIGURE 12-1: INPUT CAPTURE MODE BLOCK DIAGRAM

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

ICxBUF

Prescaler

ICx pin

ICM<2:0>

Mode Select

Note: Where ‘x’ is shown, reference is made to the registers or bits associated to the respective input capture

channels 1 through N.

Set Flag

ICxIF

ICTMR

T2_CNT T3_CNT

Edge

Detection

Logic

Clock

Synchronizer

1, 4, 16

From GP Timer Module

16 16

FIFO

R/W

Logic

ICI<1:0>

ICBN E, IC OV

ICxCON Interrupt

Logic

Set Flag

ICxIF

Data Bus

dsPIC30F6011/6012/6013/6014

12.1.2 CAPTURE BUFFER OPERATION

Each capture channel has an associated FIFO buffer

which is four 16-bit words deep. There are two status

flags which provide status on the FIFO buffer:

• ICBFNE – Input Capture Buffer Not Empty

• IC OV – Input Capture Ov erfl ow

The ICBFNE will be set on the fir st input ca ptu r e event

and remain set until all capture events have been read

from the FIF O. As each word is read fro m the FIFO, th e

remaining words are advanced by one position within

the buffer.

In the event that the FIFO is full with four capture

events and a fifth capture event occurs prior to a read

of the FIFO, an overflow condition will occur and the

ICOV bit will be s et to a logic ‘1’. The fifth capture event

is lost and is not stored in the FIFO. No additional

events will be captured until all four events have been

read from the buffer.

If a FIFO read is performed after the last read and no

new capture event has been received, the read will

yield indeterminate results.

12.1.3 TIMER2 AND TIMER3 SELECTION

MODE

The inp ut capture mod ule cons ist s of up to 8 input cap-

ture chann els. Each channel can select between one of

two timers for the time base, Timer2 or Timer3.

Selection of the timer resource is accomplished

through SFR bit, ICTMR (ICxCON<7>). Timer3 is the

default timer resource available for the input capture

module.

12.1.4 HALL SENSOR MODE

When the input capture module is set for capture on

every ed ge, rising a nd falli ng, ICM <2:0> = 001, the fol-

lowing operations are performed by the input capture

logic:

• The input capture interrupt flag is set on every

edge, rising and falling.

• The interrupt on Capture mode setting bits,

ICI<1:0>, is ignored since every capture

generates an interrupt.

• A capture overflow condition is not generated in

this mode.

12.2 Input Capture Operati on During

Sleep and Idle Modes

An input capture event will generate a device wake-up

or interrupt, if enabled, if the device is in CPU Idle or

Sleep mode.

Independent of the timer being enabled, the input cap-

ture module will wake-up from the CPU Sleep or Idle

mode when a capture event occurs if ICM<2:0> = 111

and the interrupt enable bit is asserted. The s ame wake-

up can generate an interrupt if the conditions for pro-

cessing the interrupt have been satisfied. The wake-up

feature is useful as a method of adding extra external pin

interrupts.

12.2.1 INPUT CAPTURE IN CPU SLEEP

MODE

CPU Sleep mode allows input capture module opera-

tion w ith reduced function ality. In the CPU Sleep mode,

the ICI<1:0> bits are not applicable and the input cap-

ture module can only function as an external interrupt

source.

The capture module must be configured for interrupt

only on rising edge (ICM<2:0> = 111) in order for the

input capture module to be used while the device is in

Sleep mode. The prescale settings of 4:1 or 16:1 are

not applicable in this mode.

12.2.2 INPUT CAPTURE IN CPU IDLE

MODE

CPU Idle mode allows input capture module operation

with full functionality. In the CPU Idle mode, the Inter-

rupt mode selected by the ICI<1:0> bits is applicable,

as well as the 4:1 and 16:1 capture prescale settings

which are defined by c on trol bi ts ICM<2:0 >. This mode

requires the selected timer to be enabled. Moreover,

the ICSIDL bit must be asserted to a logic ‘0’.

If the input capture module is defined as

ICM<2:0> = 111 in CPU Idle mode, the input capture

pin will serve only as an external interrupt pin.

12.3 Input Capture Int errupts

The inpu t captur e channe ls have the a bility to generate

an interrupt based upon the selected number of cap-

ture even t s . The selecti on num be r is se t b y c ont rol bits

ICI<1:0> (ICxCON<6:5>).

Each chan nel provide s an interrupt flag (ICxI F) bit. The

respective capture channel interrupt flag is located in

the corresponding IFSx Status register.

Enabling an interrupt is accomplished via the respec-

tive capture channel interrupt enable (ICxIE) bit. The

capture interrupt enable bit is located in the

corresponding IEC Control register.

dsPIC30F6011/6012/6013/6014

TABLE 12-1: INPUT CAPTURE REGISTER MAP

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

IC1BUF 0140 Input 1 Capture Register uuuu uuuu uuuu uuuu

IC1CON 0142 ——ICSIDL— — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000 0000 0000 0000

IC2BUF 0144 Input 2 Capture Register uuuu uuuu uuuu uuuu

IC2CON 0146 ——ICSIDL— — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000 0000 0000 0000

IC3BUF 0148 Input 3 Capture Register uuuu uuuu uuuu uuuu

IC3CON 014A ——ICSIDL— — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000 0000 0000 0000

IC4BUF 014C Input 4 Capture Register uuuu uuuu uuuu uuuu

IC4CON 014E ——ICSIDL— — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000 0000 0000 0000

IC5BUF 0150 Input 5 Capture Register uuuu uuuu uuuu uuuu

IC5CON 0152 ——ICSIDL— — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000 0000 0000 0000

IC6BUF 0154 Input 6 Capture Register uuuu uuuu uuuu uuuu

IC6CON 0156 ——ICSIDL— — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000 0000 0000 0000

IC7BUF 0158 Input 7 Capture Register uuuu uuuu uuuu uuuu

IC7CON 015A ——ICSIDL— — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000 0000 0000 0000

IC8BUF 015C Input 8 Capture Register uuuu uuuu uuuu uuuu

IC8CON 015E ——ICSIDL— — — — — ICTMR ICI<1:0> ICOV ICBNE ICM<2:0> 0000 0000 0000 0000

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

13.0 OUTPUT COMP ARE MODULE

This sec tion desc ribes the ou tput comp are modu le and

associated operational modes. The features provided

by this module are useful in applications requiring

operational modes, such as:

• Generation of Variable Width Output Pulses

• Pow er Fact or Correction

Figure 13-1 depicts a block diagram of the output

compare module.

The key operational features of the output compare

module include:

• Timer2 and Timer3 Selection mode

• Simple Output Compare Match mode

• Dual Output Compare Match mode

• Simple PWM mode

• Output Compare During Sleep and Idle modes

• Interrupt on Output Compare/PWM Event

These operating modes are determined by setting the

appropriate bits in the 16-bit OCxCON SFR (where

x = 1,2,3,...,N). The dsPIC DSC devices contain up to

8 compare channels (i.e., the maximum value of N is 8).

OCxRS and OCxR in Figure 13-1 represent the Dual

Compare registers. In the Dual Compare mode, the

OCxR register is used for the f irst comp are and O CxRS

is used for the second compare.

FIGURE 13-1: OUTPUT COMPARE MODE BLOCK DIAGRAM

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

OCxR

Comparator

Output

Logic QS

OCM<2:0>

Output OCx

Set Flag bit

OCxIF

OCxRS

Mode Select

Note: Where ‘x’ is shown, reference is made to the registers associated with the respective output compare

channels 1 through N.

OCFA

OCTSEL 01

T2P2_MATCHTMR2<15:0 TMR3<15:0> T3P3_MATCH

From General Purpose

(for x = 1, 2, 3 or 4)

or OCFB

(for x = 5, 6, 7 or 8)

Timer Module

Enable

dsPIC30F6011/6012/6013/6014

13.1 Timer 2 and Timer3 Selecti on Mode

Each output compare channel can select between one

of two 16-bit timers, Timer2 or Timer3.

The selection of the timers is controlled by the OCTSEL

bit (OCxCON<3> ). T im er2 is the de fault ti mer reso urce

for the output compare module.

13.2 Simple Output Compare Match

Mode

When control bits OCM<2:0> (OCxCON<2:0>) = 001,

010 or 011, the selected output compare channel is

configured for one of three simple Output Compare

Match modes:

• Compare forces I/O pin low

• Compare forces I/O pin high

• Compare toggles I/O pin

The OCxR reg is ter i s us ed in th es e m ode s. Th e O C xR

selected incrementing timer count. When a compare

occurs, o ne of these C ompare Match modes oc curs. If

the counter resets to zero before reaching the value in

OCxR, the state of the OCx pin remains unchanged.

13.3 Dual Output Compare Match Mode

When control bits OCM<2:0> (OCxCON<2:0>) = 100

or 101, the selec ted outp ut compare chan nel is co nfig-

ured for one of two Dual Output Compare modes,

which are:

• Single Output Pulse mode

• Conti nuous Output Pulse mode

13.3.1 SINGLE PULSE MODE

For the use r to confi gure the modul e for the ge ner ation

of a single output pulse, the following steps are

required (assuming timer is off):

• Determine instruction cycle time TCY.

• Calcu la te d es ired pulse w id t h v al ue bas ed on TCY.

• Calcu late ti me to s tart pulse from ti mer st a rt valu e

of 0x0000.

• Write pulse width start and stop times into OCxR

and OCxRS Compare registers (x denotes

channel 1, 2, ...,N).

• Set Timer Period register to value equal to, or

greater than value in OCxRS Compare register.

• Set OCM<2:0> = 100.

• Enable timer, TON (TxCON<15>) = 1.

To initiate another single pulse, issue another write to

set OCM<2:0> = 100.

13.3.2 CONTINUOUS PULSE MODE

For the use r to confi gure the modul e for the ge neratio n

of a continuous stream of output pulses, the following

steps are required:

• Determine instruction cycle time TCY.

• Calculate desired pulse value based on TCY.

• Calcu late timer to st art pulse width from timer sta rt

value of 0x0000.

• Write pulse width start and stop times into OCxR

and OCxRS (x denotes channel 1, 2, ...,N)

Compare registers, respectively.

• Set Timer Period register to value equal to, or

greater than value in OCxRS Compare register.

• Set OCM<2:0> = 101.

• Enable timer, TON (TxCON<15>) = 1.

13.4 Simple PWM Mode

When control bits OCM<2:0> (OCxCON<2:0>) = 110

or 111, the selec ted outp ut comp are c hannel is confi g-

ured for th e PWM mode of opera tion. When co nfigured

for the PWM mode of operation, OCxR is the main l atch

(read only) and OCxRS is the secondary latch. This

enables glitchless PWM transitions.

The user must perform the following steps in order to

configure the output compare module for PWM

operation:

1. Set the PWM period by writing to the appropriate

period register.

2. Set t he PWM duty cycle by writing to the OCxR S

3. Configure the output compare module for PWM

operation.

4. Set the TMRx prescale value and enable the

Timer, TON (TxCON<15>) = 1.

13.4.1 INPUT PIN FAULT PROTECTION

FOR PWM

When control bits OCM<2:0> (OCxCON<2:0>) = 111,

the selected output compare channel is again config-

ured fo r the PWM mode of op eration with the add itional

feature of input Fault protection. While in this mode, if

a logic ‘0’ is detected on the OCF A/B pin, the respective

PWM output pin is placed in the high impedance input

state . The O CFLT bit (OCxCON <4>) in dicate s wheth er

a Fault con di t ion has oc cur red. This sta te w il l be mai n-

ta ine d un til both of the foll ow in g ev ents have o cc urre d:

• The external Fault condition has been removed.

• The PWM mode has been re-enabled by writing

to the appropriate control bits.

dsPIC30F6011/6012/6013/6014

13.4.2 PWM PERIOD

The PWM period is specified by writing to the PRx

Equation 13-1.

EQUATION 13-1:

PWM frequency is defined as 1/[PWM period].

When the selected TMRx is equal to its respective

period reg ister, PRx, the followi ng f our event s occ ur on

the next i ncrement cycle:

• TMRx is clear e d.

• The OCx pin is set.

- Exception 1: If PWM duty cycle is 0x0000,

the OCx pin will r emain low.

- Exception 2: If d uty cycl e is gr eater tha n PRx,

the pin will remain high.

• The PWM duty cycle is latched from OCxRS into

OCxR.

• The corresponding timer interrupt flag is set.

See Figure 13-2 for key PWM period comparisons.

Timer3 is referred to in Figure 13-2 for clarity.

FIGURE 13-2: PWM OUTPUT TIMING

13.5 Output Compare Operation During

CPU Sleep Mode

When the CPU enters Sleep mode, all internal clocks

are stopped. Therefore, when the CPU enters the

Sleep state, the output compare channel will drive the

pin to the active state that was observed prior to

entering the CPU Sleep state.

For exam ple, if the pin was hi gh when the CPU entere d

the Sleep st ate, the pi n will remain high . Likew ise, if the

pin wa s low when the CPU entered th e Sleep st ate, th e

pin will remain low. In either case, the output compare

module will resume operation when the device wakes

up.

13.6 Output Compare Operation During

CPU Idle Mode

When the CPU enters the Idle mode, the output

compare module can operate with full functionality.

The output compare channel will operate during the

CPU Idle m ode if th e O CSID L bi t (O CxCO N<13 >) is at

logic ‘0’ and the s elected tim e b ase (Timer2 or Timer3)

is enable d and the TSIDL bit of the sele cted timer is set

to logic ‘0’.

13.7 Output Compare Interrupt s

The outpu t comp are channels have the abil ity to gener-

ate an interrupt on a compare match, for whichever

Match mode has been selected.

For all m odes exc ept the PWM mode, when a comp are

event occurs, the respective interrupt flag (OCxIF) is

asserted and an interrupt will be generated if enabled.

The OCxIF bit is located in the corresponding IFS

Status register and must be cleared in software. The

interrupt is enabled via the respective compare inter-

rupt enable (OCxIE) bit located in the corresponding

IEC Control register.

For the PWM mode, when a n event occurs, the respec-

tive timer interrupt flag (T2IF or T3IF) is asserted and

an interrupt will be generated if enabled. The IF bit is

located in the IFS0 S tatus register and must be cleared

in software. The interrupt is enabled via the respective

timer int errupt enab le bi t (T2I E or T 3IE) locat ed in t he

IEC0 Control register. The output compare interrupt

flag is never set during the PWM mode of operation.

PWM period = [(PRx) + 1] • 4 • TOSC •

(TMRx prescale value)

Period

Duty Cycle

TMR3 = Duty Cycle TMR3 = Duty Cycle

TMR3 = PR3

T3IF = 1

(Interrupt Flag)

OCxR = OCxRS

TMR3 = PR3

(Interrupt Flag)

OCxR = OCxRS

T3IF = 1

(OCxR) (OCxR)

dsPIC30F6011/6012/6013/6014

TABLE 13-1: OUTPUT COMPARE REGISTER MAP

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

OC1RS 0180 Output Compare 1 Secondary Register 0000 0000 0000 0000

OC1R 0182 Output Compare 1 Main Register 0000 0000 0000 0000

OC1CON 0184 ——OCSIDL— — — — — — — — OCFLT OCTSEL OCM<2:0> 0000 0000 0000 0000

OC2RS 0186 Output Compare 2 Secondary Register 0000 0000 0000 0000

OC2R 0188 Output Compare 2 Main Register 0000 0000 0000 0000

OC2CON 018A ——OCSIDL— — — — — — — — OCFLT OCTSE OCM<2:0> 0000 0000 0000 0000

OC3RS 018C Output Compare 3 Secondary Register 0000 0000 0000 0000

OC3R 018E Output Compare 3 Main Register 0000 0000 0000 0000

OC3CON 0190 ——OCSIDL— — — — — — — — OCFLT OCTSEL OCM<2:0> 0000 0000 0000 0000

OC4RS 0192 Output Compare 4 Secondary Register 0000 0000 0000 0000

OC4R 0194 Output Compare 4 Main Register 0000 0000 0000 0000

OC4CON 0196 ——OCSIDL— — — — — — — — OCFLT OCTSEL OCM<2:0> 0000 0000 0000 0000

OC5RS 0198 Output Compare 5 Secondary Register 0000 0000 0000 0000

OC5R 019A Output Compare 5 Main Register 0000 0000 0000 0000

OC5CON 019C ——OCSIDL— — — — — — — — OCFLT OCTSEL OCM<2:0> 0000 0000 0000 0000

OC6RS 019E Output Compare 6 Secondary Register 0000 0000 0000 0000

OC6R 01A0 Output Compare 6 Main Register 0000 0000 0000 0000

OC6CON 01A2 ——OCSIDL— — — — — — — — OCFLT OCTSEL OCM<2:0> 0000 0000 0000 0000

OC7RS 01A4 Output Compare 7 Secondary Register 0000 0000 0000 0000

OC7R 01A6 Output Compare 7 Main Register 0000 0000 0000 0000

OC7CON 01A8 ——OCSIDL— — — — — — — — OCFLT OCTSEL OCM<2:0> 0000 0000 0000 0000

OC8RS 01AA Output Compare 8 Secondary Register 0000 0000 0000 0000

OC8R 01AC Output Compare 8 Main Register 0000 0000 0000 0000

OC8CON 01AE ——OCSIDL— — — — — — — — OCFLT OCTSEL OCM<2:0> 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family R eference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

14.0 SPI MODULE

The Serial Peripheral Interface (SPI) module is a syn-

chronou s serial inte rface. It is usefu l for commun icating

with othe r periphera l devices, such as EEPROMs, shift

registers, display drivers and A/D converters, or other

microcontrollers. It is compatible with Motorola's SPI

and SIOP interfaces.

14.1 Operating Function Description

Each SPI module consists of a 16-bit shift register,

SPIxSR (whe re x = 1 or 2), us ed for shifti ng data in and

out, and a buffer register, SPIxBUF. A control register,

SPIxCON , configures th e module. Ad ditionally, a st atus

conditions.

The seria l interfac e consis ts of 4 p ins: SDIx (se rial dat a

input), SDOx (serial data output), SCKx (shift clock

input or output), and SSx (active-low slave select).

In Mas ter m od e o pera tio n, SCK is a cl ock o utpu t b ut i n

Slave mode, it is a clock input.

A series of eight (8) or sixteen (16) clock pulses shift

out bits from the SPIxSR to SDOx pin and simulta-

neousl y s hi ft in data from SDIx pin . An inte rrup t is gen-

erated when the transfer is complete and the

corresponding interrupt flag bit (SPI1IF or SPI2IF) is

set. This interrupt can be disabled through an interrupt

enable bit (SPI1IE or SPI2IE).

The receive operation is double-buffered. When a com-

plet e by te i s r ecei ved , i t is tra nsf erre d f rom S PIxS R to

SPIxBUF.

If the re ceive buf fer is full when new data is b eing trans-

ferred from SPIxSR to SPIxBUF, the module will set the

SPIROV bit i ndicating an overflow cond ition. The tran s-

fer of the data from SPIxSR to SPIxBUF will not be

completed and the new data will be lost. The module

will no t respond to SCL tran sitions w hile SPIROV is ‘1’,

effectively disabling the module until SPIxBUF is read

by user software.

Transmit writes are also double-buffered. The user

write s to SPIxBU F. Wh en the mast er or slav e transfe r

is completed, the contents of the shift register (SPIxSR)

are moved to the receive buffer . If any transmit d ata has

been written to the buffer register, the contents of the

transmit buffer are moved to SPIxSR. The received

data is thus placed in SPIxB UF and the transmit dat a in

SPIxSR is ready for the next transfer.

In Master mode, the clock is generated by prescaling

the system clock. Data is transmitted as soon as a

value is written to SPIxBUF. The interrupt is generated

at the middle of the transfer of the last bit.

In Slave mode, data is transmitted and received as

external clock pulses appear on SCK. Again, the inter-

rupt is generated when the last bit is latched. If SSx

control i s enabled , then tran smission and recepti on are

enabled only w hen SS x = low. The SDOx output w ill be

disabled in SSx mode with SSx high.

The clock provided to the module is (FOSC/4). This

clock is then prescaled by the primary (PPRE<1:0>)

and the secondary (SPRE<2:0>) prescale factors. The

CKE bit determines whether transmit occurs on transi-

tion from active clock state to Idle clock state, or vice

versa. The CKP bit selects the Idle state (high or low)

for the clock.

14.1.1 WORD AND BYTE

COMMUNICATION

A control bit, MODE16 (SPIxCON<10>), allows the

module to communicate in either 16-bit or 8-bit mode.

16-bit operation is identical to 8-bit operation except

that the number of bits transmitted is 16 instead of 8.

The user software must disable the module prior to

changing the MODE16 bit. The SPI module is reset

when the MODE16 bit is changed by the user.

A basic dif ference betwee n 8-bit and 16-bit operat ion is

that the data is transmitted out of bit 7 of the SPIxSR for

8-bit operation, and data is transmitted out of bit15 of

the SPIxSR for 16-bit opera tion. In both mode s, dat a is

shifted into bit 0 of the SPIxSR.

14.1.2 SDOx DISABLE

A control bit , DISSDO, is provided to the SPIxCON reg-

ister to allow the SDOx output to be disabled. This will

allow the SPI module to be connected in an input only

configuration. SDO can also be used for general

purpose I/O.

14.2 Framed SPI Support

The module supports a basic framed SPI protocol in

Master or Sla ve mode. The co ntrol bit FRMEN enables

framed SPI supp ort and c auses the SSx pi n to perform

the frame synchronization pulse (FSYNC) function.

The control bit SPIFSD determines whether the SSx

pin is an input or an output (i.e., whether the module

receives or generates the frame synchronization

pulse). The frame pulse is an active high pulse for a

single SPI clock cycle. When frame synchronization is

enabled, the data transmission starts only on the

subsequent transmit edge of the SPI clock.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

Note: Both the transmit buffer (SPIxTXB) and

the receive buffer (SPIxRXB) are mapped

to the same register address, SPIxBUF.

dsPIC30F6011/6012/6013/6014

FIGURE 14-1: SPI BLOCK DIAGRAM

FIGURE 14-2: SPI MASTER/SLAVE CONNECTION

Note: x = 1 or 2.

Read Write

Internal

Data Bus

SDIx

SDOx

SSx

SCKx

SPIxSR

SPIxBUF

bit 0

Shift

Clock Edge

Select

FCY

Primary

1, 4, 16, 64

Enable Master Clock

Prescaler

Secondary

Prescaler

1:1-1:8

SS and FSYNC

Control Clock

Control

Transmit

SPIxBUF

Receive

Serial Input Buffer

(SPIxBUF)

Shift Register

(SPIxSR)

MSb LSb

SDOx

SDIx

PROCESSOR 1

SCKx

SPI Ma ster

Serial Input Buffer

(SPIyBUF)

Shift Register

(SPIySR)

LSb

MSb

SDIy

SDOy

PROCESSOR 2

SCKy

SPI Slav e

Serial Clock

Note: x = 1 or 2, y = 1 or 2.

dsPIC30F6011/6012/6013/6014

14.3 Slave Select Synchronization

The SSx pin allows a Synchronous Slave mode. The

SPI must be configured in SPI Slave mode with SSx pin

control enabled (SSEN = 1). When the SSx pin is low,

transmi ssio n and rec ep tio n are en abled and the SDOx

pin is driven. W hen SSx pi n goes high , the SDO x pi n is

no longer driven. Also, the SPI module is re-

synchronized, and all counters/control circuitry are

reset. Therefore, when the SSx pin is asserted low

again, transmission/reception will begin at the MSb

even if SSx had been de-asserted in the middle of a

transmit/receive.

14.4 SPI Operation During CPU Sleep

Mode

During Sleep mode, the SPI m odule is sh utd own. If th e

CPU enters Sleep mode while an SPI transaction is in

progress, then the transmission and reception is

aborted.

The transmitter and receiver will stop in Sleep mode.

Howeve r , regi ster conten ts are not af fected by entering

or exiting Sleep mode.

14.5 SPI Operation During CPU Idle

Mode

When the device enters Idle mode, all clock sources

remain functional. The SPISIDL bit (SPIxSTAT<13>)

select s if the SPI modul e will stop o r conti nue on Idle . If

SPISIDL = 0, t he module will contin ue to op erate w hen

the CPU enters Idle mode. If SPISIDL = 1, the module

will stop when the CPU enters Idle mode.

dsPIC30F6011/6012/6013/6014

TABLE 14-1: SPI1 REGISTER MAP

TABLE 14-2: SPI2 REGISTER MAP

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

SPI1STAT 0220 SPIEN — SPISIDL — — — — — — SPIROV — — — — SPITBF SPIRBF 0000 0000 0000 0000

SPI1CON 0222 — FRMEN SPIFSD — DISSDO MODE16 SMP CKE SSEN CKP MSTEN SPRE2 SPRE1 SPRE0 PPRE1 PPRE0 0000 0000 0000 0000

SPI1BUF 0224 Transmit and Receive Buffer 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

SPI2STAT 0226 SPIEN — SPISIDL — — — — — — SPIROV — — — — SPITBF SPIRBF 0000 0000 0000 0000

SPI2CON 0228 — FRMEN SPIFSD — DISSDO MODE16 SMP CKE SSEN CKP MSTEN SPRE2 SPRE1 SPRE0 PPRE1 PPRE0 0000 0000 0000 0000

SPI2B UF 022A T ransmit and Receive Buffer 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

15.0 I2C MODULE

The Inter-Integrated Circuit (I2CTM) module provides

complete hardware support for both Slave and Multi-

Master modes of the I2C serial communication

standard, with a 16-bit interface.

This module offers the following key features:

•I

2C interface supporting both master and slave

operation.

•I

2C Slave mode supports 7 and 10-bit address.

•I

2C Master mode supports 7 and 10-bit address.

•I

2C port allows bidirectional transfers between

master and slav es.

• Serial clock synchronization for I2C port can be

used as a ha ndshake mechanis m to suspen d and

resume serial transfer (SCLREL control).

•I

2C supports multi-master operation; detects bus

collision and will arbitrate accordingly.

15.1 Operating Function Description

The hardw are fully imple ments al l the master an d slave

functions of the I2C Standard and Fast mode

specifications, as well as 7 and 10-bit addressing.

Thus, the I2C module can operate either as a slave or

a master on an I2C bus.

15.1.1 VARIOUS I2C MODES

The following types of I2C operation are supported:

•I

2C slave operation with 7-bit address

•I

2C slave operation with 10-bit address

•I

2C master operation with 7 or 10-bit address

See the I2C programmer’s model in Figure 15-1.

15.1.2 PIN CONFIGURATION IN I2C MODE

I2C has a 2-pin interface: the SCL pin is clock and the

SDA pin is data.

15.1.3 I2C REGISTERS

I2CCON and I2C STAT are control and s ta tus reg isters ,

respect ively . Th e I2CCON register is readable an d writ-

able. The lower 6 bits of I2CSTAT are read only. The

remaining bits of the I2CSTAT are read/write.

I2CRSR is the shift register used for shifting data,

whereas I2CRCV is the buffer register to which data

bytes are written, or from which data bytes are read.

I2CRCV is the receive buffer as shown in Figure 15-1.

I2CTRN is the transmit register to which bytes are

written during a transmit operation, as shown in

Figure 15-2.

The I2CADD regis ter hol ds the s lave a ddress. A status

bit, ADD10, indicates 10-bit Address mode. The

I2CBRG acts as the Baud Rate Generator (BRG)

reload value.

In receive operations, I2CRSR and I2CRCV together

form a double-buffered receiver. When I2CRSR

receives a complete byte, it is transferred to I2CRCV

and an interrupt pulse is generated. During

transmission, the I2CTRN is not double-buffered.

FIGURE 15- 1 : PROGRAMMER’ S MODEL

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

Note: Following a Restart condition in 10-bit

mode, the user only needs to match the

first 7-bit addre ss.

Bit 7 Bit 0 I2CRCV (8 bits)

Bit 7 Bit 0 I2CTRN (8 bits)

Bit 8 Bit 0 I2CBRG (9 bits)

Bit 15 Bit 0 I2CCON (16 bits)

Bit 15 Bit 0 I2CSTAT (16 bits)

Bit 9 Bit 0 I2CADD (10 bits)

dsPIC30F6011/6012/6013/6014

FIGURE 15-2: I2C™ BLOCK DIAGRAM

I2CRSR

I2CRCV

Internal

Data Bus

SCL

SDA

Shift

Mat ch Detect

I2CADD

Start and

Stop bit Detect

Clock

Addr_Match

Clock

Stretching

I2CTRN LSB

Shift

Clock

Write

Read

BRG Down I2CBRG

Reload

Control

FCY

Start, Restart,

Stop bit Generate

Write

Read

Acknowledge

Generation

Collision

Detect

Write

Read

Write

Read

I2CCON

Write

Read

I2CSTAT

Control Logic

Read

LSB

Counter

dsPIC30F6011/6012/6013/6014

15.2 I2C Module Addresses

The I2CADD register contains the Slave mode

addresses. The register is a 10-bit register.

If the A10M bit (I2CCON<10>) is ‘0’, the address is

inter prete d by the mo dul e as a 7 - bit add ress . When an

address is re ceived, i t is c ompa red to the 7 LSbs of the

I2CADD register.

If the A10M bit is ‘1’, the address is assumed to be a

10-bit address. When an address is received, it will be

compared with the binary value ‘11110 A9 A8’ (where

A9 and A8 are t wo Mo st Si gn i f ic ant b its of I2 C AD D) . I f

that valu e m atc hes , th e ne xt ad dre ss will be c om p are d

with the Least Significant 8 bits of I2CADD, as specified

in the 10-bit addressing protocol.

15.3 I2C 7-bit Slave Mode Operation

Once enabled (I2CEN = 1), the slave module will wait

for a S t art bit to occur (i.e., the I2C module is ‘I dle’). Fol-

lowin g t he det ection of a Start bit, 8 bi t s are s hif ted into

I2CRSR and the address is compared against

I2CADD. In 7-bit mode (A10M = 0), bits I2CADD<6:0>

are compared against I2CRSR<7:1> and I2CRSR<0>

is the R_W bit. All incoming bits are sampled on the

rising edge of SCL.

If an address match occurs, an Acknowledgement will

be sent, and the slave event interrupt flag (SI2CIF) is

set on the falling edge of the ninth (ACK) bit. The

address match does not affect the contents of the

I2CRCV buffer or the RBF bit.

15.3.1 SLAVE TRANSMISSION

If the R_W bit received is a ‘1’, then the serial port will

go into Transmit mode. It wil l send ACK on the nin th bit

and then hold SCL to ‘0’ un til the CPU responds by writ-

ing to I2C TRN. SCL is rele ased by settin g the SCLREL

bit, and 8 bits of data are shifted out. Data bits are

shifted out on the fa lling edge of SCL, s uch that SDA i s

valid during SCL high. The interrupt pulse is sent on the

falling edge of the ninth clock pulse, regardless of the

status of the ACK received from the master.

15.3.2 SL AV E RECEP TION

If the R_W bit received is a ‘0’ during an address

match, then Receive mode is initiated. Incoming bits

are sa mpl ed on the risi ng ed ge of SCL . After 8 bi t s are

received, if I2CRCV is not full or I2COV is not set,

I2CRSR is transferred to I2CRCV. ACK is sent on the

ninth clock.

If the RBF flag is set, indicating that I2CRCV is still

holding data from a pre vious operati on (RBF = 1), the n

ACK is not sent; however, the interrupt pulse is gener-

ated. In the case of an overflow, the contents of the

I2CRSR are not loaded into the I2CRCV.

15.4 I2C 10-bit Slave Mode Operation

In 10-bit mode, the basic receive and transmit opera-

tions are the same as in the 7-bit mode. However, the

criteria for address match is more complex.

The I2C specification dictates that a slave must be

address ed for a write operatio n with two ad dress byte s

following a Start bit.

The A10M bit is a control bit that signifies that the

address in I2CADD is a 10-bit address rather than a 7-bit

address. The address detection protocol for the first byte

of a message address is identical for 7-bit and 10-bit

mess ag es , b ut the bit s be ing com p a r ed ar e different.

I2CADD holds the entire 10-bit address. Upon receiv-

ing an address following a Start bit, I2CRSR <7:3> is

compared against a literal ‘11110’ (the default 10-bit

address) and I2CRSR<2:1> are compared against

I2CADD<9:8>. If a match occurs and if R_W = 0, the

interrupt pu lse is sent. Th e ADD10 bit will be cleare d to

indicate a partial address match. If a match fails or

R_W = 1, the ADD10 bit is cleared and the module

returns to the Idle state.

The low byte of the address is then received and com-

pared with I2CADD<7:0>. If an address match occurs,

the interrupt pulse is generated and the ADD10 bit is

set, indicating a complete 10-bit address match. If an

address match did not occur, the ADD10 bit is cleared

and the module returns to the Idle state.

15.4.1 10-BIT MODE SLAVE

TRANSMISSION

Once a slave is addressed in this fashion with the full

10-bit address (we will refer to this state as

“PRIOR_ADDR_MATCH”), the master can begin

sending data bytes for a slave reception operation.

TABLE 15-1: 7-BIT I2C™ SLAVE

ADDRESSES SUPPORTED

BY DSPIC30F

0x00 General call address or Start byte

0x01-0x03 Reserved

0x04-0x07 Hs mode Master codes

0x08-0x77 Valid 7-bit addresses

0x78-0x7b Valid 10-bi t addresses (lower 7

bits)

0x7c-0x7f Reserved

Note: The I2CRCV will be loaded if the I2COV

bit = 1 and the RBF flag = 0. In this case,

a read of the I2CRCV was performed but

the user did not clear the state of the

I2COV bit before the next receive

occurred. The Acknowledgement is not

sent (ACK = 1) and the I2CRCV is

updated.

dsPIC30F6011/6012/6013/6014

15.4.2 10-BIT MODE SLAVE RECEPTION

Once ad dress ed, the ma ster ca n genera te a Rep eated

Start, reset the high byte of the address and set the

R_W bit without generating a Stop bit, thus initiating a

slave tran sm it ope ratio n.

15.5 Automatic Clock Stretch

In the Slave modes, the module can synchronize buffer

reads and write to the master device by clock stretching.

15.5.1 TRAN SMI T CLOCK STRETCHING

Both 10-bit and 7-bit Transmit modes implement clock

stretching by asserting the SCLREL bit after the falling

edge of the ninth cloc k, if the TBF bit is c leared, indic at-

ing the buffer is empty.

In Slave Transmit modes, clock stretching is always

performed irrespective of the STREN bit.

Clock synchronization takes place following the ninth

clock of the transmit sequence. If the device samples

an AC K on the falling edge of the ninth clock and if the

TBF bit is still clear, then the SCLREL bit is automati-

cally cleared. The SCLREL being cleared to ‘0’ will

assert the SCL line low. The user ’s ISR must set the

SCLRE L bit bef ore transmis sion is allowed to cont inue.

By holding the SCL line low, the user has time to ser-

vice the ISR and load the contents of the I2CTRN

before the master device can initiate another transmit

sequence.

15.5.2 REC EIVE CLOCK STRETCHING

The STREN bit in the I2CCON register can be used to

enable clock stretching in Slave Receive mode. When

the STR EN bit is s et, the SCL p in will be held low at the

end of each data receive sequence.

15.5.3 CLOCK STRETCHING DURING

7-BIT AD DRES SIN G (S TR EN = 1)

When the S TREN bit is set in Slave R eceive mode , the

SCL lin e is hel d low when th e buf fer register i s full . The

method for stretching the SCL output is the same for

both 7 and 10-bit addressing modes.

Clock stretch ing ta kes place fo llowing t he nin th cloc k of

the receive sequence. On the falling edge of the ninth

clock at the end of the ACK sequence, if the RBF bit is

set, the SCLREL bit is automatically cleared, forcing

the SCL output t o be hel d low. The user’s ISR must s et

the SCLREL bit before reception is allowed to continue.

By holding the SCL line low, the user has time to ser-

vice the ISR and read the contents of the I2CRCV

before the master device can initiate another receive

sequence. This will prevent buffer overruns from

occurring.

15.5.4 CLOCK STRETCHING DURING

10-BIT ADDRESSING (STREN = 1)

Clock stretching takes place automatically during the

addressing sequence. Because this module has a

the protocol to wait for the address to be updated.

After the address phase is complete, clock stretching

will occur on each data receive or transmi t sequence as

was described earlier.

15.6 Software Control led Clock

Stretching (STREN = 1)

When the STREN bit is ‘1’, the SCLREL bit may be

cleared by software to allow software to control the

clock stretching. The logic will synchronize writes to the

SCLREL bit with the SCL clock. Clearing the SCLREL

bit will not assert the SCL output until the module

detects a falling edge on the SCL output and SCL is

sampled low. If the SCLREL bit is cleared by the user

while the SCL line has been sample d low, the SCL ou t-

put will be asserted (held low). The SCL output will

remain low until the SCLREL bit is set, and all other

devices on the I2C bus have de-asserted SCL. This

ens ures that a write to t he SCLR EL bit will not viol ate

the minimum high time requirement for SCL.

If the STREN bit is ‘0’, a software write to the SCLREL

bit will be disregarded and have no effect on the

SCLREL bit.

15.7 Interrupts

The I2C module generates two interrupt flags, MI2CIF

(I2C Master In terrupt Flag) and SI2 CIF (I2C Slave Inter-

rupt Flag). The MI2CIF interrupt flag is activated on

completion of a master message event. The SI2CIF

interrupt flag is activated on detection of a message

directed to the slave.

Note 1: If the user loads the contents of I2CTRN,

setting the TBF bit before the fallin g edge

of the n int h c lo ck , th e SC LREL bit w il l n ot

be cleared and clock stretching will not

occur.

2: The SCLREL bit can be set in software,

regardless of the state of the TBF bit.

Note 1: If the user reads the contents of the

I2CRCV, clearing the RBF bit before the

falling edge of the ninth clock, the

SCLREL bit will not be cleared and clock

stretching will not occur.

2: The SCLREL bit can be set in software

regardles s of the state of the RBF bit. The

user should be careful to clear the RBF bit

in the ISR before the next receive

sequence in order to prevent an overflow

condition.

dsPIC30F6011/6012/6013/6014

15.8 Slope Control

The I2C standard requires slope control on the SDA

and SCL signals for Fast mode (400 kHz). The control

bit, DISSLW , enables the us er to disable slew rate con-

trol if desired. It is necessary to disable the slew rate

control for 1 MHz mode.

15.9 IPMI Support

The con trol bit, IPM IEN, enabl es the modul e to supp ort

Intelligent Peripheral Management Interface (IPMI).

When this bit is set, the module ac ce pts and ac t s upo n

all addres ses .

15.10 General Call Address Support

The general call address can address all devices.

When this address is used, all devices should, in

theor y, respond with an Acknow l edg em ent .

The general call address is one of eight addresses

reserved for specific purposes by the I2C protocol. It

consists of all ‘0’s with R_W = 0.

The general call address is recognized when the Gen-

eral Call Enable (GCEN) bit is set (I2CCON<7> = 1).

Following a Start bit detection, 8 bits are shifted into

I2CRSR and the address is compared with I2CADD,

and is also compared with the general call address

which is fixed in hardware.

If a gen eral cal l addre ss matc h occurs, the I2CRS R is

transferred to the I2CRCV after the eighth clock, the

RBF flag is set and on the falling edge of the ninth bit

(ACK bit), the master event interrupt flag (MI2CIF) is

set.

When the i nte rrupt is serviced, the s ou rce f or th e int er-

rupt can be checked by reading the contents of the

I2CRCV to determine if the address was device

specific or a general call address.

15.11 I2C Master Support

As a master device, six operations are supported:

• Assert a Start condition on SDA and SCL.

• Assert a Restart condition on SDA and SCL.

• Write to the I2CTRN register initiating

transmission of data/address.

• Generate a Stop condition on SDA and SCL.

• Configure the I2C port to receive data.

• Generate an ACK condition at the end of a

received byte of data.

15.12 I2C Master Operation

The master device generates all of the serial clock

pulses and the Start and Stop conditions. A transfer is

ended with a Stop condition or with a Repeated Start

condition. Since the Repeated Start condition is also

the begi nning of the next seria l transfer, the I2C bus will

not be released.

In Master Transmitter mode, serial data is output

through SDA, while SCL outputs the serial clock. The

first byte transmitted contains the slave address of the

receiving device (7 bits) and the data direction bit. In

this ca se, the da ta direc tion bit (R_ W) is logi c ‘0’. Serial

data is transmitted 8 bits at a time. After each byte is

transmitted , an ACK bit i s received . S t art and Stop con-

ditions are output to indicat e the beginn ing and the en d

of a serial transfer.

In Master Rec eive mode, the firs t byte transmitte d con-

tains the slave address of the transmitting device

(7 bits) and the data direction bit. In this case, the data

directio n bit (R_W) is lo gic ‘1’. Thus, the first byte trans -

mitted is a 7-b it slave a ddre ss , followed b y a ‘ 1’ to ind i-

cate re ceive bi t. Serial data is rece ived via SD A while

SCL outputs the serial clock. Serial data is received

8 bits at a ti me . Afte r ea ch by te is re cei ve d, a n ACK bit

is transmitted. Start and Stop conditions indicate the

beginning and end of transmission.

15.12.1 I2C MASTER TRANSMISSION

T ransmission of a data byte, a 7-bit address, or the sec-

ond half of a 10-bit address is accomplished by simply

writing a value to I2CTRN register. The user should

only write to I2CTRN when the module is in a WAIT

state . This actio n will set th e Buf fer Full Flag (TBF ) and

allow the Baud Rate Generator to begin counting and

start the next transmission. Each bit of address/data

will be shifted out onto the SDA pin after the falling

edge of SCL is asserted. The Transmit Status Flag,

TRSTAT (I2CSTAT<14>), indicates that a master

transmit is in progress.

15.12.2 I2C MASTER RECEPTION

Master mode recepti on is enabl ed by progra mmin g the

Receive Enable bit, RCEN (I2CCON<3>). The I2C

module must be Idle before the RCEN bit is set, other-

wise the RCEN bit will be disregarded. The Baud Rate

Generator begins counting and on each rollover, the

state of the SCL pin ACK and data are shifted into the

I2CRSR on the rising edge of each clock.

dsPIC30F6011/6012/6013/6014

15.12.3 BAUD RATE GENERATOR

In I2C Master mode, the reload value for the BRG is

located in the I2CBRG register. When the BRG is

loaded w ith th is v alu e, the BRG c ou nt s d own to ‘0’ and

stop s until anothe r reload has take n place. If clock arb i-

tration i s taking place, for instance , the BRG is reloaded

when the SCL pin is sampled high.

As per the I2C standard, FSCK may be 100 kHz or

400 kHz. However, the user can specify any baud rate

up to 1 MHz. I2CBRG values of ‘0’ or ‘1’ are illegal.

EQUATION 15-1: SERIAL CLOCK RATE

15.12.4 CLOCK ARBITRATION

Clock arbitration occurs when the master de-asserts

the SCL pin (SCL allowed to float high) during any

receive, transmit, or Restart/Stop condition. When the

SCL pin is allowed to float high, the Baud Rate Gener-

ator is suspended from counting until the SCL pin is

actually sampled high. When the SCL pin is sampled

high, the Baud Rate Generator is reloaded with the

content s of I2CB RG and begin s counting. Th is ensures

that t he S CL high time wi ll always be at l eas t o ne BRG

rollover count in the event that the clock is held low by

an external device.

15.12.5 MULTI-MASTER COMMUNICATION,

BUS COLLISION, AND BUS

ARBITRATION

Multi-m aster operation support is achieved by bus arbi-

tration. When the master outputs address/data bits

onto the SDA pin, arbitration takes place when the

master outputs a ‘1’ on SDA by letting SDA float high

whil e another mas ter asser ts a ‘0’. When the SCL pin

floats high, data should be stable. If the expected data

on SDA is a ‘1’ and the data sampled on the SDA

pin = 0, then a bus collision has taken place. The

master will set the MI2CIF pulse and reset the master

portion of the I2C port to its Idle state.

If a transmit was in progress when the bus collision

occurred, the transmission is halted, the TBF flag is

cleared, the SDA and SCL lines are de-asserted and a

value can now be written to I2CTRN. When the user

services the I2C master event Interrupt Service Rou-

tine, if the I2C bus i s free (i.e ., the P bit is s et), the us er

can resume communication by asserting a Start

condition.

If a Start, Restart, Stop or Acknowledge condition was

in progres s when the bus co lli si on o cc urre d, th e c ond i-

tion is aborted, the SDA and SCL lines are de-asserted,

and the respective control bits in the I2CCON register

are cleared to ‘0’. Whe n t h e us er se rv ic es th e bu s c ol -

lision Interrupt Service Routine, and if the I2C bus is

free, the user can resume co mm uni ca tio n by as se rting

a St art conditi on .

The master will continue to monitor the SDA and SCL

pins, and if a Stop condition occurs, the MI2CIF bit will

be set.

A write to the I2CTR N will start the trans mission of dat a

at the first data bit regardless of where the transmitter

left off when bus collision occurred.

In a multi-maste r en vi ronm en t, th e i nte rrup t ge nera tio n

on the d etecti on of St art a nd Stop conditio ns al lows the

determination of when the bus is free. Control of t he I2C

bus can be taken when the P bit is set in the I2CSTAT

cleared.

15.13 I2C Module Operation During CPU

Sleep and Idle Modes

15.13.1 I2C OPERATION DURING CPU

SLEE P MOD E

When the device enters Sleep mode, all clock sources

to the module are shutdown and stay at logic ‘0’. If

Sleep occurs in the middle of a transmission and the

state machine is partially into a transmission as the

clocks s top, the n the tra nsmiss ion is ab orted. Si milarl y,

if Sleep occurs in the middle of a reception, then the

reception is aborted.

15.13.2 I2C OPERATION DURING CPU IDLE

MODE

For the I2C, the I2CSIDL bit selects if the module will

stop on Idle or continue on Idle. If I2CSIDL = 0, the

module will continue operation on assertion of the Idle

mode. If I2CSIDL = 1, the module w ill s top on Idle.

I2CBRG = FCY FCY

FSCK 1,111,111 – 1

–

()

dsPIC30F6011/6012/6013/6014

TABLE 15-2: I2C REGISTER MAP

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

I2CRCV 0200 — — — — — — — — Receive Register 0000 0000 0000 0000

I2CTRN 0202 — — — — — — — — Transmit Register 0000 0000 1111 1111

I2CBRG 0204 — — — — — — — Baud Rate Generator 0000 0000 0000 0000

I2CCON 0206 I2CEN — I2CSIDL SCLREL IPMIEN A10M DISSLW SMEN GCEN STREN ACKDT ACKEN RCEN PEN RSEN SEN 0001 0000 0000 0000

I2CSTAT 0208 ACKSTAT TRSTAT — — — BCL GCSTAT ADD10 IWCOL I2COV D_A P S R_W RBF TBF 0000 0000 0000 0000

I2CADD 020A — — — — — — Address Regist er 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

16.0 UNIVERSAL ASYNCHRONOUS

RECEIVER TRANSMITTER

(UART) MODULE

This section describes the Universal Asynchronous

Receiver/Transmitter Communications module.

16.1 UART Module Overview

The key features of the UART module are:

• Full-duplex, 8 or 9-bit data communication

• Even, odd or no parity options (for 8-bit data)

• One or two Stop bits

• Fully integ rate d Baud R ate Ge nera tor with 16-bit

prescaler

• Baud rates range from 38 bps to 1.875 Mbps at a

30 MHz instruction rate

• 4-word deep transmit data buffer

• 4-word deep receive data buffer

• Parity, framing and buffer overrun error detection

• Support for interrupt only on address detect

(9th bit = 1)

• Separate transmit and receive interrupts

• Loopback mode for diagnostic support

FIGURE 16-1: UART TRANSMITTER BLOCK DIAGRAM

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

Write Write

UTX8 UxTXREG Low Byte

Load TSR

Transmit Control

– Control TSR

– Control Buffer

– Generate Flags

– Generate Interrupt

Control and Status bits

UxTXIF

Data

‘0’ (Start)

‘1’ (Stop)

Parity Parity

Generator

Transmit Shift Register (UxTSR)

16 Divider

Control

Signals

16x Baud Clock

from Baud Rate

Generator

Internal Data Bus

UTXBRK

UxTX

Note: x = 1 or 2.

dsPIC30F6011/6012/6013/6014

FIGURE 16-2: UART RECEIVER BLOCK DIAGRAM

Read

URX8 UxRXREG Low Byte

Load RSR

UxMODE

Receive Buffer Control

– Generate Flags

– Generate Interrupt

UxRXIF

UxRX

· Start bit Detect

Receive Shift Register

16 Divider

Control

Signals

UxSTA

– Shift Data Characters

Read Read

Write Write

to Buffer

8-9

(UxRSR)

PERR

FERR

· Parity Check

· Stop bit Detect

· Shift Clock Generation

· Wake Logic

Internal Da ta Bus

LPBACK

From UxTX

16x Baud Clock from

Baud Rate Generator

dsPIC30F6011/6012/6013/6014

16.2 Enabling and Setting Up UART

16.2.1 ENABLING THE UART

The UART module is enabled by setting the UARTEN

bit in the UxMODE register (where x = 1 or 2). Once

enabled , the UxTX and UxRX pins are configured as an

output and an input respectively, overriding the TRIS

and LATCH register bit settings for the corresponding

I/O port pins. The UxTX pin is at logic ‘1’ when no

transmission is taking place.

16.2.2 DISABLING THE UART

The UAR T module is di sabled by cle aring the UAR TEN

bit in the UxMODE register. This is the default state

after any Reset. If the UART is disabled, all I/O pins

operate as port pins under the control of the latch and

TRIS bits of the corresponding port pins.

Disab ling the UAR T module reset s the buf fers to empty

states. Any data characters in the buffers are lost and

the baud rate counter is reset.

All error and status flags associated with the UART

module are reset when the module is disabled. The

URXDA, OERR, FERR, PERR, UTXEN, UTXBRK and

UTXBF bits are cleared, whereas RIDLE and TRMT

are set. Other control bits, including ADDEN,

URXISEL<1:0>, UTXISEL, as well as the UxMODE

and UxBRG registers, are not affected.

Clearing the UARTEN bit while the UART is active will

abort all pending transmissions and receptions and

reset the module as defined above. Re-enabling the

UART will restart the UART in the same configuration.

16.2.3 SETTING UP DATA, PARITY AND

STOP BIT SELECTIONS

Control bits PDSEL<1:0> in the UxMODE register are

used to select the data length and parity used in the

transmission. The data length may either be 8 bits with

even, odd or no parity, or 9 bits with no parity.

The STSEL bit determines whether one or two S top bit s

will be used during data transmissi on.

The defa ult (powe r-on) settin g of the UA RT is 8 bits, n o

parity and 1 Stop bit (typically represented as 8, N, 1).

16.3 Transmitting Data

16.3.1 TRANSMITTING IN 8-BIT DATA

MODE

The following steps must be performed in order to

transmit 8-bit data:

1. Set up the UART:

First, the data length, parity and number of Stop

bits must be selected. Then, the transmit and

receive interrupt enable and priority bits are

setup in the UxMODE and UxSTA registers.

Also, the appropriate baud rate value must be

written to the UxBRG register.

2. Enable the UART by setting the UARTEN bit

(UxMODE<15>).

3. Set the UTXEN bit (UxSTA<10>), thereby

enabling a transmission.

4. W rite the byte to be transmitte d to the lower byte

of UxTXREG. The value wi ll be transferred to the

Transmit Shift register (UxTSR) immediately

and the serial bit stream will start shifting out

during the next rising edge of the baud clock.

Alternatively, the data byte may be written while

UTXEN = 0, following which, the user may set

UTXEN. This will cause the serial bit stream to

begin immediately because the baud clock will

start from a cleared state.

5. A transmit interrupt will be generated, depend-

ing on the value of the interrupt control bit

UTXISEL (UxSTA<15>).

16.3.2 TRANSMITTING IN 9-BIT DATA

MODE

The sequence of steps involved in the transmission of

9-bit data is similar to 8-bit transmission, except that a

16-bit data word (of which the upper 7 bits are always

clear) must be written to the UxTXREG register.

16.3.3 TRANSMIT BUFFER (UXTXB)

The transmit buffer is 9 bits wide and 4 characters

deep. Including the Transmit Shift register (UxTSR),

the user effectively has a 5-deep FIFO (First-In, First-

Out) buffer. The UTXBF status bit (UxSTA<9>)

indicates whether the transmit buffer is full.

If a user attempts to write to a full buffer, the new data

will not be ac cepted i nto the FIF O, and n o data shift wil l

occur within the buffer. This enables recovery from a

buffer overrun condition.

The FIFO is reset during any device Reset but is not

affected when the device enters or wakes up from a

power-saving mode.

dsPIC30F6011/6012/6013/6014

16.3.4 TRANSMIT INTERRUPT

The transmit interrupt flag (U1TXIF or U2TXIF) is

located in the corresponding interrupt flag register.

The transmitter generates an edge to set the UxTXIF

bit. The cond itio n for gene ratin g the in terru pt depe nds

on the UTXISEL control bit:

a) If UTXISEL = 0, an interrupt is generated when

a word is transferred from the transmit buffer to

the T ransmit Shift register (UxTSR). This implies

that the transmit buffer has at least one empty

word.

b) If UTXISEL = 1, an interrupt is generated when

a word is transferred from the transmit buffer to

the Transmit Shift register (UxTSR) and the

transmit buffer is empty.

Switching between the two Interrupt modes during

operation is possible and sometimes offers more

flexibility.

16.3.5 TRANSMIT BREAK

Setting the UTXBRK bit (UxSTA<11>) will cause the

UxTX line to be driven to logic ‘0’. The UTXBRK bit

overrides all transmission activity. Therefore, the user

should generally wait for the transmitter to be Idle

before setting UTXBRK.

To send a break character , the UTXBRK bit must be set

by soft ware and must re main set for a mi nimum of 13

baud clock cycles. The UTXBRK bit is then cleared by

software to generate Stop bits. The user must wait for

a duration of at least one or two baud clock cycles in

order to ensure a valid Stop bit(s) before reloading the

UxTX B, or s tar t i ng o t he r t r an sm itt e r ac ti v it y. Transmis -

sion of a break character does not generate a

transmit interrupt.

16.4 Receiving Data

16.4.1 RECEIVING IN 8-BIT OR 9-BIT

DATA MODE

The following steps must be performed while receiving

8-bit or 9-bit data:

1. Set up the UART (see Section 16.3.1 “Trans-

mitting in 8-bit data mode”).

2. Enable the UART (see Section 16.3.1 “Trans-

mitting in 8-bit data mode”).

3. A receive interrupt will be generated when one

or more data words have been received,

depending on the receive interrupt settings

specified by the URXISEL bits (UxSTA<7:6>).

4. Read the OERR bit to determine if an overrun

error has occ urred. The OERR bit must be reset

in software.

5. Read the received data from UxRXREG. The act

of reading UxRXREG will move the next word to

the top of the receive FIFO, and the PERR and

FERR values will be updated.

16.4.2 RECEIVE BUFFER (UXRXB)

The receive buffer is 4 words deep. Including the

Receive Shift register (UxRSR), the user effectively

has a 5-word deep FIFO buffer.

URXDA (UxSTA<0>) = 1 indicates that the receive

buffer has data available. URXDA = 0 implies that the

buffer is empty. If a user attempts to read an empty

buffer, the old values in the buffer will be read and no

data shift will occur within the FIFO.

The FIFO is reset during any device Reset. It is not

affected when the device enters or wakes up from a

power-saving mode.

16.4.3 RECEIVE INTERRUPT

The receive interrupt flag (U1RXIF or U2RXIF) can be

read from the c orresp onding interru pt fla g register. The

interrupt flag is set by an edge generated by the

rece iver. The cond iti on f or se tti ng t he re ceiv e int err upt

flag depends on the settings specified by the

URXISEL<1:0> (UxSTA<7:6>) control bits.

a) If URXISEL<1:0> = 00 or 01, an interrupt is gen-

erated every time a data word is transferred

from the Receive Shift register (UxRSR) to the

receive buffer. There may be one or more

charact ers in the receive buffer.

b) If URXISEL<1:0> = 10, an interrupt is generated

when a word is transferred from the Receive Shift

result of the transfer, contains 3 characters.

c) If URXISEL<1:0> = 11, an interrupt is set when

a word is transf erred from th e Receive Shift reg-

ister (UxRSR) to the receive buffer, which as a

result of the transfe r, conta ins 4 c ha rac ters (i.e .,

becomes full).

Switching between the Interrupt modes during opera-

tion is possible, though generally not advisable during

normal operation.

16.5 Reception Error Handling

16.5.1 RECEIVE BUFFER OVERRUN

ERROR (OERR BIT)

The OERR bit (UxSTA<1>) is set if all of the following

conditions occur:

a) The receive buffer is full.

b) The Receive Shift register is full, but unable to

transfer the character to the receive buffer.

c) The Stop bit of the character in the UxRSR is

detected, indicating that the UxRSR needs to

transfer the character to the buffer.

dsPIC30F6011/6012/6013/6014

Once OER R is se t, no furthe r data is shi fted in UxRSR

(until the OERR bit is cleared in software or a Reset

occurs). The data held in UxRSR and UxRXREG

remains val id.

16.5.2 FRAMING ERROR (FERR)

The FERR bit (UxSTA<2>) is set if a ‘0’ is detected

instead of a Stop bit. If two Stop bits are selected, both

Stop bits must be ‘1’, otherwise FERR will be set. The

read only FERR bit is buffered along with the received

data. It is cleared on any Reset.

16.5.3 PARITY ERROR (PERR)

The PERR bit (UxSTA<3>) is set if the parity of the

received word is incorrect. This error bit is applicable

only if a Parity mode (odd or even) is selected. The

read only PERR bit is buffered along with the received

data bytes. It is cleared on any Reset.

16.5.4 IDLE STATUS

When the receiver is active (i.e., between the initial

detecti on of the Start bit and the comp letion of the Sto p

bit), the RIDLE bit (UxST A<4>) is ‘0’ . Between the com-

pletion of the Stop bit and dete ction of the next S tart bit,

the RIDLE bit is ‘1’, indicating that the UART is Idle.

16.5.5 R EC EIV E BRE AK

The receiver will count and expect a certain number of

bit times based on the values programmed in the

PDSEL (UxMODE<2:1>) and STSEL (UxMODE<0>)

bits.

If the break is longer than 13 bit times, the reception is

considered complete after the number of bit times

specif ied by PDSEL and STSEL. The URXDA bit is se t,

FERR is set, zeros are loaded into the receive FIFO,

interrupts are generated if appropriate and the RIDLE

bit is set.

When the module receiv es a lo ng b r ea k s ign al a nd th e

receive r has detected the S t art bit, the dat a bits and the

invalid Stop bit (which sets the FERR), the receiver

must wai t for a val id Sto p bit before looki ng for the next

Start bit . It cannot assu me that the br eak conditi on on

the line is the next Start bit.

Break is reg arded as a characte r containin g all ‘0’s with

the FERR bit set. The break character is loaded into the

buffer. No further rec eption can occur un til a Stop bit is

received. Note that RIDLE goes high when the S top bit

has not yet been received.

16.6 Address Detect Mode

Setting the ADDEN bit (UxSTA<5>) enables this spe-

cial mode in which a 9th bit (URX8) value of ‘1’ identi-

fies the rec ei ve d wo rd a s a n a ddress, rathe r th an data.

This m ode is o nly a pplicable for 9-bi t d ata comm un ic a-

tion. The URXISEL control bit does not have any

impact on interrupt generation in this mode since an

interrupt (if enabled) will be generated every time the

received word has the 9th bit set.

16.7 Loopback Mode

Setting the LPBACK bit enables this special mode in

which the UxTX pin is int ernally conne cted to the UxRX

pin. When configured for the Loopback mode, the

UxRX pin is disconnected from the internal UART

receive logic. However, the UxTX pin still functions as

in a normal operation.

To select this mode:

a) Configure UART for desired mode of operation.

b) Set LPBACK = 1 to enable Loopback mode.

c) En abl e tran sm is si on as def ine d in Section 16.3

“Transmitting Data”.

16.8 Baud Rate Generator

The UART has a 16-bit Baud Rate Generator to allow

maximu m fl exib ilit y in b aud r ate ge nera tio n. Th e Baud

Rate Generator register (UxBRG) is readable and

writable. The baud rate is computed as follows:

BRG = 16-bit value held in UxBRG register

(0 through 65535)

FCY = Instruction Clock Rate (1/TCY)

The Baud Rate is given by Equati on 16-1.

EQUATION 16-1: BAUD RATE

Therefore, the maximum baud rate possible is

FCY/16 (if BRG = 0),

and the minimum baud rate possible is

FCY/(16 * 65536).

With a full 16-bit Baud Rate Generator at 30 MIPS

operation, the minimum baud rate achievable is

28.5 bps.

Baud Rate = FCY/(16 * (BR G + 1))

dsPIC30F6011/6012/6013/6014

16.9 Auto Baud Support

To allow the system to determine baud rates of

received characters, the input can be optionally linked

to a capture input (IC1 for UART1, IC2 for UART2). To

enable th is mode, the user must program the input cap-

ture modul e to detect the falling and rising edges of the

Start bit.

16.10 UART Operation During CPU

Sleep and Idle Modes

16.10.1 UART OPERATION DURING CPU

SLEEP MODE

When the device enters Sleep mode, all clock sources

to the mo dule are shut down and st ay at logic ‘0’. If entry

into Sleep mode occurs while a transmission is in

progress, then the transmission is aborted. The UxTX

pin is driven to logic ‘1’. Similarly, if entry into Sleep

mode occurs while a reception is in progress, then the

reception is aborted. The UxSTA, UxMODE, transmit

and receive registers and buffers, and the UxBRG

If the W AKE bit (UxMODE <7>) is set before the device

enters Sleep mode, t hen a falling edg e on the UxRX pin

will gen era te a rec eive interrupt. The Recei ve Interru pt

Select mode bit (URXISEL) has no effect for this func-

tion. If the receive interrupt is enabled, then this will

wake-u p the dev ic e from Sl eep . Th e UA RTEN bit m us t

be set in order to generate a wake-up interrupt.

16.10.2 UART OPERATION DURING CPU

IDLE MODE

For the UART, the USIDL bit selects if the module will

stop operation when the device enters Idle mode or

whethe r the m odu le wi ll co nti nue on Idl e. If U SID L = 0,

the module will continue operation during Idle mode. If

USIDL = 1, the module will stop on Idle.

dsPIC30F6011/6012/6013/6014

TABLE 16-1: UART1 REGISTER MAP

TABLE 16-2: UART2 REGISTER MAP

SFR Name Addr . Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

U1MODE 020C UARTEN —USIDL— — — — — WAKE LPBACK ABAUD —— PDSEL1 PDSEL0 STSEL 0000 0000 0000 0000

U1STA 020E UTXISEL — — — UTXBRK UTXEN UTXBF TRMT URXISEL1 URXISEL0 ADDEN RIDLE PERR FERR OERR URXDA 0000 0001 0001 0000

U1TXREG 0210 — — — — — — — UTX8 Transmit Register 0000 000u uuuu uuuu

U1RXREG 0212 — — — — — — — URX8 Receive Register 0000 0000 0000 0000

U1BRG 0214 Baud Rate Generator Prescaler 0000 0000 0000 0000

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

U2MODE 0216 UARTEN —USIDL— — — — — WAKE LPBACK ABAUD —— PDSEL1 PDSEL0 STSEL 0000 0000 0000 0000

U2STA 0218 UTXISEL — — — UTXBRK UTXEN UTXBF TRMT URXISEL1 URXISEL0 ADDEN RIDLE PERR FERR OERR URXDA 0000 0001 0001 0000

U2TXREG 021A — — — — — — — UTX8 Transmit Register 0000 000u uuuu uuuu

U2RXREG 021C — — — — — — — URX8 Receive Register 0000 0000 0000 0000

U2BRG 021E Baud Rate Generator Prescaler 0000 0000 0000 0000

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

17.0 CAN MODULE

17.1 Overview

The Controller Area Network (CAN) module is a serial

interface, useful for communicating with other CAN

modules or microcontroller devices. This interface/

protocol was designed to allow communications within

noisy env iro nm ents.

The C AN mo du le i s a co mm un i ca tio n co ntr o ll er i mp le -

menting the CAN 2.0 A/B protocol, as defined in the

BOSCH specification. The module will support

CAN 1.2, CAN 2.0A, CAN 2.0B Passive, and CAN 2.0B

Active v ersio ns of th e protocol. Th e m od ule im ple men-

tation is a full CAN system. The CAN specification is

not covered within this data sheet. The reader may

refer to the BOSCH CAN specification for further

details.

The module features are as follows:

• Implementation of the CAN protocol CAN 1.2,

CAN 2.0A and CAN 2.0B

• Standard and extended data frames

• 0-8 bytes data length

• Programmable bit rate up to 1 Mbit/sec

• Support for remote frames

• Doubl e-bu f fe red receiver with two prioritiz ed

received message storage buffers (each buffer

may contain up to 8 bytes of data)

• 6 full (standard/extended identifier) acceptance

filters, 2 associated with the high priority receive

buffer and 4 associated with the low priority

rece ive buffer

• 2 full acceptance filter masks, one each

associated with the high and low priority receive

buffers

• Three transmit buffers with application specified

priori tization and abort c apabilit y (each buf fer may

contain up to 8 bytes of data)

• Programmable wake-up functionality with

integra ted low-pass filter

• Programm abl e Loopback m ode su pp orts self -tes t

operation

• Signaling via interrupt capabilities for all CAN

receiver and transmitter error states

• Programmable clock source

• Programm abl e lin k to Input Capture modu le (IC 2,

for both CAN1 and CAN2) for time-stamping and

netw ork synchronizati on

• Low-power Sleep and Idle mode

The CAN bus modu le consist s of a protocol engi ne and

message buffering/control. The CAN protocol engine

handles all functions for receiving and transmitting

messages on the CAN bus. Messages are transmitted

by first loading the appropriate data registers. Status

and errors can be checked by reading the appropriate

registers. Any message detected on the CAN bus is

checked for errors and then matched against filters to

see if it should be received and stored in one of the

receive registers.

17.2 Frame Types

The CAN module transmits various types of frames

which include data messages or remote transmission

requ es ts i ni tia t e d b y th e us er, as ot her f ram es t ha t are

automatically generated for control purposes. The

following frame types are supported:

• Standard Data Frame:

A standard data frame is generated by a node

when the node wishes to transmit data. It includes

an 11-bit standard identifier (SID) but not an 18-bit

extended identifier (EID).

• Extended Data Frame:

An extended data frame is similar to a standard

data frame but includes an extended identifier as

well.

• Remote Frame:

It is possible for a destination node to request the

data from the source. For this purpose, the desti-

nation node sends a remote frame with an identi-

fier that ma tches the iden tifier o f the re quired dat a

frame. T he approp riate dat a sou rce n ode will then

send a data frame as a response to this remote

request.

• Error Frame:

An error frame is generated by any node that

detects a bus error. An error frame consists of 2

fields: an error flag field and an error delimiter

field.

• Overload Frame:

An overl oad fram e can b e generat ed by a node a s

a result of 2 conditions. First, the node detects a

dominant bit during interframe space which is an

illegal condition. Second, due to internal condi-

tions, the node is not yet able to start reception of

the next message. A node may generate a maxi-

mum of 2 s equ ent ial ove rload frames to dela y th e

start of the next message.

• Inter frame Spac e:

Interframe space separates a proceeding frame

(of wha tever type ) from a follo wing da ta or remo te

frame.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

dsPIC30F6011/6012/6013/6014

FIGURE 17-1: CAN BUFFERS AND PROTOCOL ENGINE BLOCK DIAGRAM

Acceptance Filter

RXF2

Identifier

Data Field Data Field

Identifier

Acceptance Mas k

RXM1

Acceptance Filter

RXF3

Acceptance Filter

RXF4

Acceptance Filter

RXF5

Acceptance Mask

RXM0

Acceptance Filter

RXF0

Acceptance Filter

RXF1

MSGREQ

TXB2

TXABT

TXLARB

TXERR

MTXBUFF

MESSAGE

Message

Queue

Control Transmit Byte Sequencer

MSGREQ

TXB1

TXABT

TXLARB

TXERR

MTXBUFF

MESSAGE

MSGREQ

TXB0

TXABT

TXLARB

TXERR

MTXBUFF

MESSAGE

Receive ShiftTransmit Shift

Receive

Error

Transmit

Error

Protocol

RERRCNT

TERRCNT

Err Pas

Bus Off

Finite

State

Machine

Counter

Transmit

Logic

Bit

Timing

Logic

CiTX(1) CiRX(1)

Bit Timing

Generator

PROTOCOL

ENGINE

BUFFERS

CRC Check

CRC Generator

Note 1: i = 1 or 2 refers to a particular CAN module (CAN1 or CAN2).

dsPIC30F6011/6012/6013/6014

17.3 Modes of Operation

The CAN module can operate in one of several Operation

modes selected by the user . These modes include:

• Initialization Mode

• Disable Mode

• Normal Operation Mode

• List en On ly Mode

• Loop bac k Mo de

• Error Recognition Mode

Modes are requested by setting the REQOP<2:0> bits

(CiCTRL<10:8>). Entry into a mode is Acknowledged

by monito ring the OPMODE< 2:0> bi t s (CiC TRL <7:5 >).

The module will not change the mode and the

OPMODE bits until a change in mode is acceptable,

generally during bus Idle time which is defined as at

least 11 consecutive recessive bits.

17.3.1 INITIALIZATION MODE

In the Ini tialization mode, the module will not tra nsmit or

receive. The error counters are cleared and the inter-

rupt flags remain unchanged. The programmer will

have access to configuration registers that are access

restricted in other modes. The module will protect the

user from accidentally violating the CAN protocol

through p rogramming er rors. All registe rs which contro l

the configuration of the module can not be modified

while the module is on-line. The CAN module will not

be allowed to enter the Configuration mode while a

transmission is taking place. The Configuration mode

serves as a lock to protect the following registers.

• All Module Control Registers

• Baud Rate and Interrupt Configuration Registers

• Bus Timing Registers

• Identifier Acceptance Filter Registers

• Identifier Acceptance Mask Registers

17.3.2 DISABLE MODE

In Disable mode, the module will not transmit or

receive . The mo dule has the ability to set the W AKIF b it

due to bus activity, howev er , an y pending interrupt s will

remain and the error counters will retain their value.

If the REQOP<2:0> bits (CiCTRL<10:8>) = 001, the

module will enter the Module Disable mode. If the module

is activ e, the m odule wil l wait for 11 recessive bi ts on the

CAN bus, detect that condition as an Idle bus, then

accept the module disable command. When the

OPMODE<2:0> bits (CiCTRL<7:5>) = 001, that indi-

cates whether the module successfully went into Module

Disable mode. The I/O pins will revert to normal I/O

function when the mod ule is in the Module Disable mo de.

The module can be programmed to apply a low-pass

filter function to the C iRX inp ut line whil e the modu le or

the CPU is in Sleep mode. The WAKFIL bit

(CiCFG2<14>) enables or disables the filter.

17.3.3 NORMAL OPERATION MODE

Normal Operating mode is selected when

REQOP<2:0> = 000. In this mode, the module is acti-

vated and the I/O pins will assume the CAN bus func-

tions. The module will transmit and receive CAN bus

messages via the CxTX and CxRX pins.

17.3.4 LIS TEN ON LY MODE

If the Li st en O nl y mode is activa ted , the m od ule on the

CAN bus is passive. The transmitter buffers revert to

the port I/O function. The receive pins remain inputs.

For the rec eiv er, no error flags or Ac kn ow le dge s ign al s

are sent. The error counters are deactivated in this

state. The Listen Only mode can be used for detecting

the baud rate on the CAN bus. To use this, it is neces-

sary that there are at least two further nodes that

communicate with each other.

17.3.5 LIS TEN AL L MESS A GES MODE

The module can be set to ignore all errors and receive

any message. The Error Recognition mode is activated

by setti ng RE QOP<2: 0> = ‘111’. In this mode, the data

which is in the message assembly buffer until the time

an error occurred, is copied in the receive buffer and

can be read via the CPU interface.

17.3.6 LOOPBACK MODE

If the Loopbac k mode is activ ated, the mo dule will con-

nect the internal transmit signal to the internal receive

signal at the module boundary. The transmit and

receive pins revert to their port I/O function.

Note: Typically, if the CAN module is allowed to

transmit in a particular mode of operation

and a transmission is requested immedi-

ately after the CAN module has been

placed in tha t mode of operati on, the mod-

ule waits for 11 consecutive recessive bits

on the bus before starting transmission. If

the user switches to Disable Mode within

this 11-bi t pe riod , th en thi s tr ansm issi on is

aborted and the corresponding TXABT bit

is set and TXREQ bit is cleared.

dsPIC30F6011/6012/6013/6014

17.4 Message Reception

17.4.1 RECEIV E BU FFER S

The CAN bus module has 3 receive buffers. However,

one of the receiv e b uf fers is al ways c om mi tted to mo n-

itoring the bus for incoming messages. This buffer is

called the Message Assembly Buffer (MAB). So there

are 2 receive b uf fers v isibl e, RXB0 and RXB1, that ca n

essentially instantaneously receive a complete

message from the protocol engine.

All messages are assembl ed by the MAB and are trans-

ferred to the RXBn buffers only if the acceptance filter

criterion are met. When a message is received, the

RXnIF flag (CiINTF<0> or CiINRF<1>) will be set. This

bit can only be set by the module when a message is

received. The bit is cleared by the CPU when it has com-

pleted processing the message in the buffer. If the

RXnIE bit (CiINTE<0> or CiINTE<1>) is set, an interrupt

will be generated when a mess age is rec eived.

RXF0 and RXF1 filters with RXM0 mask are associated

with RXB0. The filters RXF2, RXF3, RXF4, and RXF5

and the mask RXM1 are associated with RXB1.

17.4.2 MESSAGE ACCEPTANCE FILTERS

The me ssage acc eptance filters and masks ar e used to

determine if a message in the message assembly

buffer should be loaded into either of the receive buff-

ers. Once a valid message has been received into the

Message Assembly Buffer (MAB), the identifier fields of

the message are compared to the filter values. If there

is a match, that message will be loaded into the

appropri ate rec eiv e buffer.

The acceptance filter looks at incoming messages for

the RXIDE bit (CiRXnSID<0>) to determine how to

compare the identifiers. If the RXIDE bit is clear, the

message is a standard frame and only filters with the

EXIDE bit (CiRXFnSID<0>) clear are compared. If the

RXIDE bit is set, the message is an extended frame,

and only filters with the EXIDE bit set are compared.

Configuring the RXM<1:0> bits to ‘01’ or ‘10’ can

ove rride the EXIDE bit.

17.4.3 MESSAGE ACCEPTANCE FILTER

MASKS

The mask bits e ssential ly determi ne which bit s to appl y

the filter to. If any m as k bit is se t to a ze ro, then that b it

will automatically be accepted regardless of the filter

bit. There are 2 prog rammab le ac cept ance filter ma sks

assoc iated with the receive bu ffers, one for each bu ffer .

17.4.4 RECEIVE OVERRUN

An overrun condition occurs when the Message

Assembly Buffer (MAB) has assembled a valid

received message, the message is accepted through

the acceptance filters, and when the receive buffer

associated with the filter has not been designated as

clear of the previous message.

The overrun error flag, RXnOVR (CiINTF<15> or

CiINTF<14>), and the ERRIF bit (CiINTF<5>) will be

set and the message in the MAB will be discarded.

If the D BEN bi t i s cle ar, RXB1 and RXB0 o pera te inde-

pendently. When this is the case, a message intended

for RXB0 will not be diverted into RXB1 if RXB0 con-

tains an unread message and the RX0OVR bit will be

set.

If the DBEN bit is set, the overrun for RXB0 is handled

differently. If a va lid m es sa ge is r ece iv ed fo r R XB0 an d

RXFUL = 1 indicates that RXB0 is full and RXFUL = 0

indicates that RXB1 is empty, the message for RXB0

will be loaded into RXB1. An overrun error will not be

generated for RXB0. If a valid message is received for

RXB0 an d RXFUL = 1, indicating that both RXB0 and

RXB1 are full, the message will be lost and an overrun

will be indicated for RXB1.

17.4.5 RECEIVE ERRORS

The CAN module will detect the following receive

errors:

• Cyclic Redundancy Check (CRC) Error

• Bit Stuffing Error

• Invalid Message Receive Error

These receive errors do not generate an interrupt.

However, the receive error counter is incremented by

one in case one of these errors occur. The RXWAR bit

(CiINTF<9>) indicates that the receive error counter

has reached the CPU warning limit of 96 and an

interrupt is genera ted.

17.4.6 RECEIVE INTERRUPTS

Receive interrupts can be divided into 3 major groups,

each including various conditions that generate

interrupts:

• Receive Interrupt:

A message has been successfully received and

loaded into one of the receive buffers. This inter-

rupt is activated immediately after receiving the

End of Fr ame (EOF) field. Reading the R XnIF flag

will indicate which receive buffer caused the

interrupt.

• Wake-up Interrupt:

The CAN module has woken up from Disable

mode or the device has woken up from Sleep

mode.

dsPIC30F6011/6012/6013/6014

• Receive Error Interrupts:

A receive error interrupt will be indicated by the

ERRIF bit. This bit shows that an error condition

occurred. The source of the error can be deter-

mined by checking the bits in the CAN Interrupt

Status register, CiINTF.

- Invalid Message Received:

If any type of error occurred during reception of

the last message, an error will be indicated by

the IVRIF bit.

- Receiver Overrun:

The RXnOVR bit indicates that an overrun

conditi on oc curred.

- Receiver Wa rning:

The RXWAR bit indicates that the receive error

counter (RERRCNT<7:0>) has reached the

warning limit of 96.

- Receiver Error Passive:

The RXEP bit indicates that the receive error

counter has exceeded the error passive limit of

127 and the modul e h as go ne into error p a ss iv e

state.

17.5 Message Transmission

17.5.1 T RAN SMI T BUFFERS

The CAN module has three transmit buffers. Each of

the thre e buf fers occ upies 14 bytes of d ata. Ei ght of th e

bytes a re the maximum 8 bytes of the transm itted me s-

sage. Five bytes hold the standard and extended

identifiers and other message arbitration information.

17.5.2 TRANSMIT MESSAGE PRIORITY

Transmit priority is a prioritization within each node of

the pending transmittable messages. There are

4 levels of transmit priority. If TXPRI<1:0>

(CiTXnCON<1:0>, where n = 0, 1 or 2 represents a par-

ticular transmit buffer) for a particular message buffer is

set to ‘11’, that buffer has the highest priority. If

TXPRI<1:0> for a particular message buffer is set to

‘10’ or ‘01’, that buffer has an intermediate priority. If

TXPRI<1:0 > for a parti cular message buffe r is ‘00’, that

buffe r has the lowest priorit y.

17.5.3 TRANSMISSION SEQUENCE

To initiate transmission of the message, the TXREQ bit

(CiTXnCON<3>) must be set. The CAN bus module

resolves any timing conflicts between setting of the

TXREQ bit and the S tart of Frame (SOF), ensuring that if

the priority was changed, it is resolved correctly before the

SOF occurs. When TXREQ is set, the TXABT

(CiTXnCON<6>), TXLARB (CiTXnCON<5>) and TXERR

(CiTXnCON<4>) flag bits are automatically cleared.

Setting TXREQ bit simply flags a message buffer as

enqueued for transmission. When the module detects

an available bus, it begins transmitting the message

which has been determi ned to have the highest priori ty .

If the transmission completes successfully on the first

attempt, the TXREQ bit is cleared automatically, and

an interrupt is generated if TXIE was set.

If the mes sa ge tra ns miss io n fai ls, one of the error co n-

dition flags will be set, and the TXREQ bit will remain

set indicating that the message i s still p ending for trans-

mission. If the message e ncountered an error conditio n

during the transmission attempt, the TXERR bit will be

set, and the error condition may cause an interrupt. If

the message loses arbitration during the transmission

attempt, the TXLARB bit is set. No interrupt is

generated to signal the loss of arbitration.

17.5.4 ABORTIN G MESSAGE

TRANSMISSION

The system can also abort a message by clearing the

TXREQ bit associated with each message buffer. Set-

ting the ABAT bit (CiCTRL<12>) will request an abort

of all pending messages. If the message has not yet

started transmission, or if the message started but is

interrupted by loss of arbitration or an error, the abort

will be processed. The abort is indicated when the

module sets the TXABT bit and the TXnIF flag is not

automatically set.

17.5.5 TRANSMISSION ERRORS

The CAN module will detect the followin g trans m iss io n

errors:

• Acknowledge Error

• Form Error

• Bit Error

These transmission err ors will not necessarily generate

an interrupt but are indicated by the transmission error

counter. However, each of these errors will cause the

transmission error counter to be incremented by one.

Once the value of the error counter exceeds the value

of 96, the ERRIF (CiINTF<5>) and the TXWAR bit

(CiINTF<10>) are set. Once the value of the error

counter exceeds the value of 96, an interrupt is

generate d and the TXW A R bit in the Erro r Flag regist er

is set.

dsPIC30F6011/6012/6013/6014

17.5.6 TRANSMIT INTERRUPTS

T ransmit interrupts can be divided into 2 major groups,

each including various conditions that generate

interrupts:

• Transmit Interrupt:

At least one of the three transmit buffers is empty

(not scheduled) and can be loaded to schedule a

message for transmission. Reading the TXnIF

flags will ind icate which transmit buf fer is available

and caused the interrupt.

• Transmit Error Interrupts:

A transmission error interrupt will be indicated by

the ERRIF flag. This fl ag sh ow s that an error con-

dition occurred. The source of the error can be

determi ned by check ing the error fl ags in the CAN

Interrupt Status register, CiINTF. The flags in this

- Transmitter Warning Interrupt:

The TXWAR bit indicates that the transmit error

counter has reached the CPU warning limit of

96.

- Transmitter Error Passive:

The TXEP bit (CiINTF<12>) indicates that the

transmit error counter has exceeded the error

pas siv e lim it of 127 an d the modul e has gone to

error passive state.

- Bus Off:

The TXBO bit (CiINTF<13>) indicates that the

transmit error counter has exceeded 255 and

the module has gone to the bus off state.

17.6 Baud Rate Setting

All nodes on any particular CAN bus must have the

same nomin al bit rate. In ord er to set the baud rate, the

following parameters have to be initialized:

• Syn chronization Jump Width

• Baud Rate Prescaler

• Phase Segments

• Length determination of Phase Segment 2

• Sample Poi nt

• Propag ati on Segm en t bit s

17.6.1 BI T TIMING

All controllers on the CAN bus must have the same

baud rate and bit length. However, different controllers

are not required to have the same master oscillator

clock. At different clock frequencies of the individual

controllers, the baud rate has to be adjusted by

adjusti ng the num be r of time quan t a in eac h segm en t.

The nomi nal bit time can be though t of as being div ided

into separate non-overlapping time segments. These

segments are shown in Figure 17-2.

• Synchronization Segment (Sync Seg)

• Propagation Time Segment (Prop Seg)

• Phase Segment 1 (Phase1 Seg)

• Phase Segment 2 (Phase2 Seg)

The time segments and also the nominal bit time are

made up of integer units of time called time quanta or

TQ. By definition, the nominal bit time has a minimum

of 8 TQ and a maximum of 25 TQ. Also, by definition,

the minimum nominal bit time is 1 μsec corresponding

to a maximum bit rate of 1 MHz.

FIGURE 17-2: CAN BIT TIMING

Input Signal

Sync Prop

Segment Phase

Segment 1 Phase

Segment 2 Sync

Sample Point

dsPIC30F6011/6012/6013/6014

17.6.2 PRESCALER SETTING

There is a programmable prescaler with integral values

ranging from 1 to 64, in addition to a fixed divide-by-2

for clock generation. The time quantum (TQ) is a fixed

unit of time derived from the oscillator period, and is

given by Equation 17-1. .

EQUATION 17-1: TIME QUANTUM FOR

CLOCK GENERATION

17.6.3 PROPAGATION SEGMENT

This p art of t he bit time is u sed to com pensa te phy sica l

delay ti me s withi n the ne twork . These delay times co n-

sist of the signal propagation time on the bus line and

the inte rnal delay tim e of the nodes. The Prop Seg can

be programmed from 1 TQ to 8 TQ by setting the

PRSEG<2:0> bits (CiCFG2<2:0>).

17.6.4 PHASE SEGMENTS

The phase segments are used to optimally locate the

sampling of the received bit within the transmitted bit

time. The sampling point is between Phase1 Seg and

Phase2 Seg. These segmen ts are lengthen ed or sho rt-

ened by res ynchronizatio n. The end of the Phase1 Seg

determines the sampling point within a bit period. The

segment is programmable from 1TQ to 8 TQ. Phase2

Seg provides delay to the next transmitted data transi-

tion. Th e segment is programmable from 1 TQ to 8 TQ,

or it may be defined to be equal to the greater of

Phase1 Seg or the in form ati on pro ce ssin g tim e (2 TQ).

The Phase1 Seg is initialized by setting bits

SEG1PH<2:0> (CiCFG2<5:3>), and Phase2 Seg is

initialized by setting SEG2PH<2:0> (CiCFG2<10:8>).

The following requirement must be fulfilled while setting

the lengths of the phase segments:

Prop Seg + Phase1 Seg > = Phase2 Seg

17.6.5 SAMPL E POINT

The sample point is the point of time at which the bus

level is read and interpreted as the value of that respec-

tive bi t. The loca tio n i s at the end of Phas e1 Seg . I f th e

bit timin g is slow and cont ains many TQ, it is possible to

specify multiple sampling of the bus line at the sample

point. The level determin ed by the CAN bus then co rre-

sponds to the result from the majority decision of three

values. The majority samples are taken at the sample

point and twice before with a distance of TQ/2. The

CAN module allows the user to choose between sam-

pling thre e times at the s ame point or once at the same

point, by setting or clea ring the SAM bit (CiC FG2<6>).

Typically, the sampling of the bit should take place at

about 60-70% through the bit time, depending on the

system parameters.

17.6.6 SYNCHRONIZATION

To compensate for phase shifts between the oscillator

frequencies of the different bus stations, each CAN

controller must be able to synchronize to the relevant

signal edge of the incoming signal. When an edge in

the transmitted data is detected, the logic will compare

the loc ation of the edge t o th e expec ted tim e (Syn chro-

nous Segment). The circuit will then adjust the values

of Phase1 Seg and Phase2 Seg. There are 2

mechanisms used to synchronize.

17.6.6. 1 Har d Sync hr oni za tio n

Hard synchronization is only done whenever there is a

‘rece ssive’ to ‘ dominant’ edge during bus Idle indicatin g

the start of a message. After hard synchronization, the

bit time coun ters are rest arted wi th the Syn c Seg. Ha rd

synchronization forces the edge which has caused the

hard synchronization to lie within the synchronization

segmen t of the rest arted bit time. If a hard synchron iza-

tion is don e, there will not be a res ynchroniza tion within

that bit time.

17.6.6.2 Resynchronization

As a result of resynchronization, Phase1 Seg may be

lengthened or Phase2 Seg may be shortened. The

amount of lengthening or shortening of the phase

buf f er s egm en t h as an upper bound k no w n a s t he sy n-

chronization jump width, and is specified by the

SJW<1:0> bits (CiCFG1<7:6>). The value of the syn-

chronization jump wid th will be added to Phase1 Seg or

subtracted from Phase2 Seg. The resynchronization

jump width is programmable between 1TQ and 4 TQ.

The following requirement must be fulfilled whi le setting

the SJW<1:0> bits:

Phase2 Seg > Synchr onization Jump Width

Note: FCAN must not exceed 30 MHz. If

CANCKS = 0, then FCY must not exceed

7.5 MHz.

TQ = 2 (BRP<5:0> + 1)/FCAN

dsPIC30F6011/6012/6013/6014

TABLE 17-1: CAN1 REGISTER MAP

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

C1RXF0SID 0300 — — — Receive Acc eptance Fi lter 0 Standard Identifier <10 :0> — EXIDE 000u uuuu uuuu uu0u

C1RXF0EIDH 0302 — — — — Receive Acceptance Filter 0 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RXF0EIDL 0304 Receive Acceptance Filter 0 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C1RXF1SID 0308 — — — Receive Accept ance Filter 1 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C1RXF1EIDH 030A — — — — Receive Acceptance Filter 1 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RXF1EIDL 030C Receive Acceptance Filter 1 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C1RXF2SID 0310 — — — Receive Accept ance Filter 2 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C1RXF2EIDH 0312 — — — — Receive Acceptance Filter 2 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RXF2EIDL 0314 Receive Acceptance Filter 2 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C1RXF3SID 0318 — — — Receive Accept ance Filter 3 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C1RXF3EIDH 031A — — — — Receive Acceptance Filter 3 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RXF3EIDL 031C Receive Acceptance Filter 3 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C1RXF4SID 0320 — — — Receive Accept ance Filter 4 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C1RXF4EIDH 0322 — — — — Receive Acceptance Filter 4 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RXF4EIDL 0324 Receive Acceptance Filter 4 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C1RXF5SID 0328 — — — Receive Accept ance Filter 5 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C1RXF5EIDH 032A — — — — Receive Acceptance Filter 5 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RXF5EIDL 032C Receive Acceptance Filter 5 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C1RXM0SID 0330 — — — Receive Acceptance Mask 0 Standard Identifier <10:0> —MIDE000u uuuu uuuu uu0u

C1RXM0EIDH 0332 — — — — Receive Acceptance Mask 0 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RXM0EIDL 0334 Receive Acceptance Mask 0 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C1RXM1SID 0338 — — — Receive Acceptance Mask 1 Standard Identifier <10:0> —MIDE000u uuuu uuuu uu0u

C1RXM1EIDH 033A — — — — Receive Acceptance Mask 1 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RXM1EIDL 033C Receive Acceptance Mask 1 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C1TX2SID 0340 Transmit Buffer 2 Standard Identifier <10:6> — — — Transmit Buffer 2 Standard Identifier <5:0> SRR TXIDE uuuu u000 uuuu uuuu

C1TX2EID 0342 Transmit Buffer 2 Extended Identifier

<17:14> — — — — Transmit Buffer 2 Extended Identifier <13:6> uuuu 0000 uuuu uuuu

C1TX2DLC 0344 Transmit Buffer 2 Extended Identifier <5:0> TXRTR TXRB1 TXRB0 DLC<3:0> — — — uuuu uuuu uuuu u000

C1TX2B1 0346 Transmit Buffer 2 Byte 1 Transmit Buffer 2 Byte 0 uuuu uuuu uuuu uuuu

C1TX2B2 0348 Transmit Buffer 2 Byte 3 Transmit Buffer 2 Byte 2 uuuu uuuu uuuu uuuu

C1TX2B3 034A Transmit Buffer 2 Byte 5 Transmit Buffer 2 Byte 4 uuuu uuuu uuuu uuuu

C1TX2B4 034C Transmit Buffer 2 Byte 7 Transmit Buffer 2 Byte 6 uuuu uuuu uuuu uuuu

C1TX2CON 034E — — — — — — — — — TXABT TXLARB TXERR TXREQ — TXPRI<1:0> 0000 0000 0000 0000

C1TX1SID 0350 Transmit Buffer 1 Standard Identifier <10:6> — — — Transmit Buffer 1 Standard Identifier <5:0> SRR TXIDE uuuu u000 uuuu uuuu

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

C1TX1EID 0352 Transmit Buffer 1 Extended Identifier

<17:14> — — — — Transmit Buffer 1 Extended Identifier <13:6> uuuu 0000 uuuu uuuu

C1TX1DLC 0354 Transmit Buffer 1 Extended Identifier <5:0> TXRTR TXRB1 TXRB0 DLC<3:0> — — — uuuu uuuu uuuu u000

C1TX1B1 0356 Transmit Buffer 1 Byte 1 Transmit Buffer 1 Byte 0 uuuu uuuu uuuu uuuu

C1TX1B2 0358 Transmit Buffer 1 Byte 3 Transmit Buffer 1 Byte 2 uuuu uuuu uuuu uuuu

C1TX1B3 035A Transmit Buffer 1 Byte 5 Transmit Buffer 1 Byte 4 uuuu uuuu uuuu uuuu

C1TX1B4 035C Transmit Buffer 1 Byte 7 Transmit Buffer 1 Byte 6 uuuu uuuu uuuu uuuu

C1TX1CON 035E — — — — — — — — — TXABT TXLARB TXERR TXREQ — TXPRI<1:0> 0000 0000 0000 0000

C1TX0SID 0360 Transmit Buffer 0 Standard Identifier <10:6> — — — Transmit Buffer 0 Standard Identifier <5:0> SRR TXIDE uuuu u000 uuuu uuuu

C1TX0EID 0362 Transmit Buffer 0 Extended Identifier

<17:14> — — — — Transmit Buffer 0 Extended Identifier <13:6> uuuu 0000 uuuu uuuu

C1TX0DLC 0364 Transmit Buffer 0 Extended Identifier <5:0> TXRTR TXRB1 TXRB0 DLC<3:0> — — — uuuu uuuu uuuu u000

C1TX0B1 0366 Transmit Buffer 0 Byte 1 Transmit Buffer 0 Byte 0 uuuu uuuu uuuu uuuu

C1TX0B2 0368 Transmit Buffer 0 Byte 3 Transmit Buffer 0 Byte 2 uuuu uuuu uuuu uuuu

C1TX0B3 036A Transmit Buffer 0 Byte 5 Transmit Buffer 0 Byte 4 uuuu uuuu uuuu uuuu

C1TX0B4 036C Transmit Buffer 0 Byte 7 Transmit Buffer 0 Byte 6 uuuu uuuu uuuu uuuu

C1TX0CON 036E — — — — — — — — — TXABT TXLARB TXERR TXREQ — TXPRI<1:0> 0000 0000 0000 0000

C1RX1SID 0370 — — — Receive Buffer 1 Standard Identifier <10:0> SRR RXIDE 000u uuuu uuuu uuuu

C1RX1EID 0372 — — — — Receive Buffer 1 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RX1DLC 0374 Receive Buffer 1 Extended Identifier <5:0> RXRTR RXRB1 — — — RXRB0 DLC<3:0> uuuu uuuu 000u uuuu

C1RX1B1 0376 Receive Buffer 1 Byte 1 Receive Buffer 1 Byte 0 uuuu uuuu uuuu uuuu

C1RX1B2 0378 Receive Buffer 1 Byte 3 Receive Buffer 1 Byte 2 uuuu uuuu uuuu uuuu

C1RX1B3 037A Receive Buffer 1 Byte 5 Receive Buffer 1 Byte 4 uuuu uuuu uuuu uuuu

C1RX1B4 037C Receive Buff er 1 Byt e 7 Receive Buffer 1 B yte 6 uuuu uuuu uuuu uuuu

C1RX1CON 037E — — — — — — — —RXFUL— — — RXRTRRO FILHIT<2:0> 0000 0000 0000 0000

C1RX0SID 0380 — — — Receive Buffer 0 Standard Identifier <10:0> SRR RXIDE 000u uuuu uuuu uuuu

C1RX0EID 0382 — — — — Receive Buffer 0 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C1RX0DLC 0384 Receive Buffer 0 Extended Identifier <5:0> RXRTR RXRB1 — — — RXRB0 DLC<3:0> uuuu uuuu 000u uuuu

C1RX0B1 0386 Receive Buffer 0 Byte 1 Receive Buffer 0 Byte 0 uuuu uuuu uuuu uuuu

C1RX0B2 0388 Receive Buffer 0 Byte 3 Receive Buffer 0 Byte 2 uuuu uuuu uuuu uuuu

C1RX0B3 038A Receive Buffer 0 Byte 5 Receive Buffer 0 Byte 4 uuuu uuuu uuuu uuuu

C1RX0B4 038C Receive Buff er 0 Byt e 7 Receive Buffer 0 B yte 6 uuuu uuuu uuuu uuuu

C1RX0CON 038E — — — — — — — —RXFUL— — — RXRTRRO DBEN JTOFF FILHIT0 0000 0000 0000 0000

C1CTRL 0390 CANCAP — CSIDLE ABAT CANCKS REQOP<2:0> OPMODE<2:0> — ICODE<2:0> —0000 0100 1000 0000

C1CFG1 0392 — — — — — — — — SJW<1:0> BRP<5:0> 0000 0000 0000 0000

C1CFG2 0394 —WAKFIL— — — SEG2PH<2:0> SEG2PHTS SAM SEG1PH<2:0> PRSEG<2:0> 0u00 0uuu uuuu uuuu

C1INTF 0396 RX0OVR RX1OVR TXBO TXEP RXEP TXWAR RXWAR EWARN IVRIF WAKIF ERRIF TX2IF TX1IF TX0IF RX1IF RX0IF 0000 0000 0000 0000

TABLE 17-1: CAN1 REGISTER MAP (CONTINUED)

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

C1INTE 0398 — — — — — — — — IVRIE WAKIE ERRIE TX2IE TX1IE TX0IE RX1E RX0IE 0000 0000 0000 0000

C1EC 039A Transmit Error Count Register Receive Error Count Register 0000 0000 0000 0000

TABLE 17-1: CAN1 REGISTER MAP (CONTINUED)

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

TABLE 17-2: CAN2 REGISTER MAP

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

C2RXF0SID 03C0 — — — Receive Acceptance Filter 0 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C2RXF0EIDH 03C2 — — — — Receive Acceptance Filter 0 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RXF0EIDL 03C4 Receive Acceptance Filter 0 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C2RXF1SID 03C8 — — — Receive Acceptance Filter 1 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C2RXF1EIDH 03CA — — — — Receive Acceptance Filter 1 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RXF1EIDL 03CC Receive Acceptance Filter 1 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C2RXF2SID 03D0 — — — Receive Acceptance Filter 2 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C2RXF2EIDH 03D2 — — — — Receive Acceptance Filter 2 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RXF2EIDL 03D4 Receive Acceptance Filter 2 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C2RXF3SID 03D8 — — — Receive Acceptance Filter 3 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C2RXF3EIDH 03DA — — — — Receive Acceptance Filter 3 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RXF3EIDL 03DC Receive Acceptance Filter 3 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C2RXF4SID 03E0 — — — Receive Acceptance Filter 4 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C2RXF4EIDH 03E2 — — — — Receive Acceptance Filter 4 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RXF4EIDL 03E4 Receive Acceptance Filter 4 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C2RXF5SID 03E8 — — — Receive Acceptance Filter 5 Standard Identifier <10:0> — EXIDE 000u uuuu uuuu uu0u

C2RXF5EIDH 03EA — — — — Receive Acceptance Filter 5 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RXF5EIDL 03EC Receive Acceptance Filter 5 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C2RXM0SID 03F0 — — — Receive Acceptance Mask 0 Standard Identifier <10:0> —MIDE000u uuuu uuuu uu0u

C2RXM0EIDH 03F2 — — — — Receive Acceptance Mask 0 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RXM0EIDL 03F4 Receive Acceptance Mask 0 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C2RXM1SID 03F8 — — — Receive Acceptance Mask 1 Standard Identifier <10:0> —MIDE000u uuuu uuuu uu0u

C2RXM1EIDH 03FA — — — — Receive Acceptance Mask 1 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RXM1EIDL 03FC Receive Acceptance Mask 1 Extended Identifier <5:0> — — — — — — — — — — uuuu uu00 0000 0000

C2TX2SID 0400 Transmit Buffer 2 Standard Identifier <10:6> — — — Transmit Buffer 2 Standard Identifier <5:0> SRR TXIDE uuuu u000 uuuu uuuu

C2TX2EID 0402 Transmit Buffer 2 Extended Identifier

<17:14> — — — — Transmit Buffer 2 Extended Identifier <13:6> uuuu 0000 uuuu uuuu

C2TX2DLC 0404 Transmit Buffer 2 Extended Identifier <5:0> TXRTR TXRB1 TXRB0 DLC<3:0> — — — uuuu uuuu uuuu u000

C2TX2B1 0406 Transmit Buffer 2 Byte 1 Transmit Buffer 2 Byte 0 uuuu uuuu uuuu uuuu

C2TX2B2 0408 Transmit Buffer 2 Byte 3 Transmit Buffer 2 Byte 2 uuuu uuuu uuuu uuuu

C2TX2B3 040A Transmit Buffer 2 Byte 5 Transmit Buffer 2 Byte 4 uuuu uuuu uuuu uuuu

C2TX2B4 040C Transmit Buffer 2 Byte 7 Transmit Buffer 2 Byte 6 uuuu uuuu uuuu uuuu

C2TX2CON 040E — — — — — — — — — TXABT TXLARB TXERR TXREQ — TXPRI<1:0> 0000 0000 0000 0000

C2TX1SID 0410 Transmit Buffer 1 Standard Identifier <10:6> — — — Transmit Buffer 1 Standard Identifier <5:0> SRR TXIDE uuuu u000 uuuu uuuu

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family R eference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

C2TX1EID 0412 Transmit Buffer 1 Extended Identifier

<17:14> — — — — Transmit Buffer 1 Extended Identifier <13:6> uuuu 0000 uuuu uuuu

C2TX1DLC 0414 Transmit Buffer 1 Extended Identifier <5:0> TXRTR TXRB1 TXRB0 DLC<3:0> — — — uuuu uuuu uuuu u000

C2TX1B1 0416 Transmit Buffer 1 Byte 1 Transmit Buffer 1 Byte 0 uuuu uuuu uuuu uuuu

C2TX1B2 0418 Transmit Buffer 1 Byte 3 Transmit Buffer 1 Byte 2 uuuu uuuu uuuu uuuu

C2TX1B3 041A Transmit Buffer 1 Byte 5 Transmit Buffer 1 Byte 4 uuuu uuuu uuuu uuuu

C2TX1B4 041C Transmit Buffer 1 Byte 7 Transmit Buffer 1 Byte 6 uuuu uuuu uuuu uuuu

C2TX1CON 041E — — — — — — — — — TXABT TXLARB TXERR TXREQ — TXPRI<1:0> 0000 0000 0000 0000

C2TX0SID 0420 Transmit Buffer 0 Standard Identifier <10:6> — — — Transmit Buffer 0 Standard Identifier <5:0> SRR TXIDE uuuu u000 uuuu uuuu

C2TX0EID 0422 Transmit Buffer 0 Extended Identifier

<17:14> — — — — Transmit Buffer 0 Extended Identifier <13:6> uuuu 0000 uuuu uuuu

C2TX0DLC 0424 Transmit Buffer 0 Extended Identifier <5:0> TXRTR TXRB1 TXRB0 DLC<3:0> — — — uuuu uuuu uuuu u000

C2TX0B1 0426 Transmit Buffer 0 Byte 1 Transmit Buffer 0 Byte 0 uuuu uuuu uuuu uuuu

C2TX0B2 0428 Transmit Buffer 0 Byte 3 Transmit Buffer 0 Byte 2 uuuu uuuu uuuu uuuu

C2TX0B3 042A Transmit Buffer 0 Byte 5 Transmit Buffer 0 Byte 4 uuuu uuuu uuuu uuuu

C2TX0B4 042C Transmit Buffer 0 Byte 7 Transmit Buffer 0 Byte 6 uuuu uuuu uuuu uuuu

C2TX0CON 042E — — — — — — — — — TXABT TXLARB TXERR TXREQ — TXPRI<1:0> 0000 0000 0000 0000

C2RX1SID 0430 — — — Receive Buffer 1 Standard Identifier <10:0> SRR RXIDE 000u uuuu uuuu uuuu

C2RX1EID 0432 — — — — Receive Buffer 1 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RX1DLC 0434 Receive Buffer 1 Extended Identifier <5:0> RXRTR RXRB1 — — — RXRB0 DLC<3:0> uuuu uuuu 000u uuuu

C2RX1B1 0436 Receive Buffer 1 Byte 1 Receive Buffer 1 Byte 0 uuuu uuuu uuuu uuuu

C2RX1B2 0438 Receive Buffer 1 Byte 3 Receive Buffer 1 Byte 2 uuuu uuuu uuuu uuuu

C2RX1B3 043A Receive Buffer 1 Byte 5 Receive Buffer 1 Byte 4 uuuu uuuu uuuu uuuu

C2RX1B4 043C Receive Buffer 1 Byte 7 Receive Buffer 1 Byte 6 uuuu uuuu uuuu uuuu

C2RX1CON 043E — — — — — — — —RXFUL— — — RXRTRRO FILHIT<2:0> 0000 0000 0000 0000

C2RX0SID 0440 — — — Receive Buffer 0 Standard Identifier <10:0> SRR RXIDE 000u uuuu uuuu uuuu

C2RX0EID 0442 — — — — Receive Buffer 0 Extended Identifier <17:6> 0000 uuuu uuuu uuuu

C2RX0DLC 0444 Receive Buffer 0 Extended Identifier <5:0> RXRTR RXRB1 — — — RXRB0 DLC<3:0> uuuu uuuu 000u uuuu

C2RX0B1 0446 Receive Buffer 0 Byte 1 Receive Buffer 0 Byte 0 uuuu uuuu uuuu uuuu

C2RX0B2 0448 Receive Buffer 0 Byte 3 Receive Buffer 0 Byte 2 uuuu uuuu uuuu uuuu

C2RX0B3 044A Receive Buffer 0 Byte 5 Receive Buffer 0 Byte 4 uuuu uuuu uuuu uuuu

C2RX0B4 044C Receive Buffer 0 Byte 7 Receive Buffer 0 Byte 6 uuuu uuuu uuuu uuuu

C2RX0CON 044E — — — — — — — —RXFUL— — — RXRTRRO DBEN JTOFF FILHIT0 0000 0000 0000 0000

C2CTRL 0450 CANCAP — CSIDLE ABAT CANCKS REQOP<2:0> OPMODE<2:0> — ICODE<2:0> —0000 0100 1000 0000

C2CFG1 0452 — — — — — — — — SJW<1:0> BRP<5:0> 0000 0000 0000 0000

C2CFG2 0454 — WAKFIL — — — SEG2PH<2:0> SEG2PHTS SAM SEG1PH<2:0> PRSEG<2:0> 0u00 0uuu uuuu uuuu

TABLE 17-2: CAN2 REGISTER MAP (CONTINUED)

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family R eference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

C2INTF 0456 RX0OVR RX1OVR TXBO TXEP RXEP TXWAR RXWAR EWARN IVRIF WAKIF ERRIF TX2IF TX1IF TX0IF RX1IF RX0IF 0000 0000 0000 0000

C2INTE 0458 — — — — — — — — IVRIE WAKIE ERRIE TX2IE TX1IE TX0IE RX1E RX0IE 0000 0000 0000 0000

C2EC 045A Transmit Error Count Register Receive Error Count Register 0000 0000 0000 0000

TABLE 17-2: CAN2 REGISTER MAP (CONTINUED)

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family R eference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

18.0 DAT A CONVERTER

INTERFACE (DCI) MODULE

18.1 Module Introduction

The dsPIC30F Data Converter Interface (DCI) module

allows simple interfacing of devices, such as audio

coder/decoders (Codecs), A/D converters and D/A

converters. The following interfaces are supported:

• Framed Synchronous Serial Transfer (Single or

Multi-Channel)

• Inter-IC Sound (I2S) Interface

• AC-Link Compliant mode

The DCI module provides the following general

features:

• Programmable word size up to 16 bits

• Support for up to 16 time slots, for a maximum

frame size of 256 bits

• Data buffering for up to 4 samples without CPU

overhead

18.2 Module I/O Pins

There are four I/O pins associated with the module.

When enabled, the module controls the data direction

of each of the four pins.

18.2.1 CSCK PIN

The CSCK pin provides the serial clock for the DCI

module. The CSCK pin may be configured as an input

or output using the CSCKD control bit in the DCICON1

SFR. When configured as an output, the serial clock is

provided by the dsPIC30F. When configured as an

input, the serial clock must be provided by an external

device.

18.2.2 C SD O PIN

The serial data output (CSDO) pin is configured as an

output only pin when the module is enabled. The

CSDO pin drives the serial bus whenever data is to be

tran smit ted. Th e CSDO pi n is tri- state d or driv en t o ‘0’

during CSCK periods when data is not transmitted,

depending on the state of the C SDOM control bit. This

allows other devices to place data on the serial bus

during transmission periods not used by the DCI

module.

18.2.3 CSDI PIN

The serial data input (CSDI) pin is configured as an

input only pin when the module is enabled.

18.2.3.1 COFS PIN

The Codec frame synchronization (COFS) pin is used

to synchronize data transfers that occur on the CSDO

and CSDI pins. The COFS pin ma y be configured as an

input or an ou tpu t. The data directi on for the COFS pi n

is determined by the COFSD control bit in the

DCICON1 register.

The DCI module accesses the shadow registers while

the CPU is in the process of accessing the memory

mapped buffer registers.

18.2.4 BUFFER DATA ALIGNMENT

Data values are always stored left justified in the buff-

ers since most Codec data is represented as a signed

2’s comp lemen t fracti onal n umber. If the rece ived wo rd

length is less than 16 bits, the unused LSbs in the

receive buffer registers are set to ‘0’ by the module. If

the transmitted word length is less than 16 bits, the

unused LSb s in the transm it buf fer regis ter are ignore d

by the module. The word length setup is described in

subsequent sections of this document.

18.2.5 TRANSMIT/RECEIVE SHIFT

The DCI module has a 16-bit shift register for shifting

serial data in and out of the module. Data is shifted in/

out of th e shift reg ister MSb first, since audio PCM data

is transmitted in signed 2’s complement format.

18.2.6 DCI BUFFER CONTROL

The DCI m odule con tains a buffe r control uni t for trans-

ferring data between the shadow buffer memory and

the serial shift regi ster. The buffer control unit is a sim-

ple 2-bit address counter that points to word locations

in the shadow buffer memory. For the receive memory

spac e (high addres s portion of DCI bu ffer me mory), the

address counter is concatenated with a ‘0’ in the MSb

locatio n to form a 3-bit ad dres s. For th e tran sm it mem -

ory space (high portion of DCI buffer memory), the

address counter is concatenated with a ‘1’ in the MSb

location.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

Note: The DCI buffer control unit always

access es the sam e rel ati ve lo cat ion in the

transmit and receive buffers, so only one

address counter is provided.

dsPIC30F6011/6012/6013/6014

FIGURE 18-1: DCI MODULE BLOCK DIAGRAM

BCG Control bits

16-bit Data Bus

Sample Rate

Generator

SCKD

FSD

DCI Buffer

Frame

Synchronization

Generator

Control Unit

DCI Shift Register

Receive Buffer

Registers w/Shadow

FOSC/4

Word Size Selection bits

Frame Length Selection bits

DCI Mode Selection bits

CSCK

COFS

CSDI

CSDO

15 0

Transmit Buffer

Registers w/Shadow

dsPIC30F6011/6012/6013/6014

18.3 DCI Module Operation

18.3.1 MODULE ENABLE

The DCI module is enabled or disabled by setting/

clearing the DCIEN control bit in the DCICON1 SFR.

Clearing the DCIEN control bit has the effect of reset-

ting the module. In particular, all counters associated

with CSCK generation, frame sync, and the DCI buffer

control unit are reset.

The DCI clocks are shutdown when the DCIEN bit is

cleared.

When enabled, the DCI controls the data direction for

the four I/O pins associated with the module. The Port,

LAT and TRIS register values for these I/O pins are

overridden by the DCI module when the DCIEN bit is set.

It is also possible to override the CSCK pin separately

when the bit clock generator is enabled. This permits

the bit clock generator to operate without enabling the

rest of the DCI module.

18.3.2 WORD SIZE SELECTION BITS

The WS<3:0> word size selection bits in the DCICON2

SFR determine the number of bits in each DCI data

word. Essentially, the WS<3:0> bits determine the

counting period for a 4-bit counter clocked from the

CSCK signal.

Any data length, up to 16 bits, may be selected. The

value loaded into the WS<3:0> bits is one less the

desired word length. For example, a 16-bit data word

size is selected when WS <3:0> = 1111.

18.3.3 FRAME SYNC GENERATOR

The frame sync generator (COFSG) is a 4-bit counter

that sets the frame length in data words. The frame

sync gen erator is incre mente d each tim e the word size

counter is reset (refer to Section 18.3.2 “Word Size

Selection Bits”). The period for the frame synchroni-

zation generator is set by writing the COFSG<3:0>

control bits in the DCICON2 SFR. The COFSG period

in clock cycles is determined by the following formula:

EQUATION 18-1: COFSG PERIOD

Frame lengths, up to 16 data words, may be selected.

The frame length in CSCK periods can vary up to a

maximum of 256 depending on the word size that is

selected.

18.3.4 FRAM E SYNC MODE

CONTROL BITS

The type of frame sync signal is selected using the

Frame Synchronization mode control bits

(COFSM<1:0>) in the DCICON1 SFR. The following

operating modes can be selected:

• Multi-Channel mode

•I

2S mode

• AC-Link mode (16-bit)

• AC-Link mode (20-bit)

The operation of the COFSM control bits depends on

whether the DCI module generates the frame sync

signal as a master device, or receives the frame sync

signal as a slave device.

The master device in a DSP/Codec pair is the device

that generates the frame sync signal. The frame sync

signal initiates data transfers on the CSDI and CSDO

pins and usually has the same frequency as the data

sample rate (COFS).

The DCI module is a frame sync master if the COFSD

control bit is cleared and is a frame sync slave if the

COFSD cont rol bit is set.

18.3.5 MASTER FRAME SYNC

OPERATION

When the DCI module is operating as a frame sync

master device (COFSD = 0), the COFSM mode bits

determine the type of frame sync pulse that is

generated by the frame sync generator logic.

A new COFS signal is generated when the frame sync

generator resets to ‘0’.

In the Multi-Channel mode, the frame sync pulse is

drive n high for the CSC K period to init iate a d at a trans-

fer. The number of CSCK cycles between successive

frame sync pulses will depend on the word size and

frame sync generator control bits. A timing diagram for

the frame sync signal in Multi-Channel mode is shown

in Figure 18-2.

In the AC-Link mode of operation, the frame sync sig-

nal has a fixed period and duty cycle. The AC-Link

frame sy nc signal is high for 16 CSCK cycles an d is low

for 240 CSCK cycles. A timing diagram with the timing

details at the start of an AC-Link frame is shown in

Figure 18-3.

In the I2S mode, a fram e sync si gnal having a 50% duty

cycle is generated. The period of the I2S frame sync

signal in CSCK cycles is determined by the word size

and frame sync generator control bits. A new I2S data

transfer boundary is marked by a high-to-low or a

low-to-high transition edge on the COFS pin.

Note: These WS<3:0> control bits are used only

in the Multi-Channel and I2S modes. These

bits have no effect in AC-Link mode since

the dat a slot sizes are fixed by the protocol.

Note: The CO FSG control bits will h ave no ef fect

in AC-Link mode since the frame length is

set to 256 CSCK periods by the protocol.

Frame Leng th = Word Length • (FSG Value + 1)

dsPIC30F6011/6012/6013/6014

18.3.6 SLAVE FRAME SYNC OPERATION

When the DCI module is operating as a frame sync

slave (COFSD = 1), data transf ers are contro lled by the

Codec device attached to the DCI module. The

COFSM control bits control how the DCI module

responds to incoming COFS signals.

In the Multi-Channel mode, a new data frame transfer

will begin one CSCK cycle after the COFS pin is sam-

pled high (see Figure 18-2). The pulse on the COFS

pin resets the frame sync generator logic.

In the I2S mode, a new data word will be transferred

one CSCK cycle after a low-to-high or a high-to-low

transition is sampled on the COFS pin. A rising or fall-

ing edge on the COFS pin resets the frame sync

generator logic.

In the AC -Li nk mo de, the tag slot and su bs equent data

slots for the next frame will be transferred one CSCK

cycl e aft er the COFS pin is sampled high.

The COFSG and WS bits must be configured to pro-

vide the proper frame length when the module is oper-

ating in the Slave mode. On ce a va lid frame syn c pulse

has been sampled by th e mo du le on the COFS pin, an

entire data frame transfer will take place. The module

will not respond to further frame sync pulses until the

data fram e tr ansfer has com ple ted .

FIGURE 18-2: FRAME SYNC TIMING, MULTI-CHANNEL MODE

FIGURE 18-3: FRAME SYNC TIMING, AC-LINK START OF FRAME

FIGURE 18-4: I 2S INT ERFACE F RAME SYNC TIMING

CSCK

CSDI/CSDO

COFS

MSB LSB

Tag

MSb

BIT_CLK

CSDO or CSDI

SYNC

Tag

bit 14

S12

LSb

S12

bit 1

S12

bit 2 Tag

bit 13

MSB LSB MSB LSB

CSCK

CSDI or CSDO

Note: A 5-bit transfer is show n here for illustration purposes. The I2S protocol does not specify word length – this

will be system dependent.

dsPIC30F6011/6012/6013/6014

18.3.7 BIT CLOCK GENERATOR

The DCI module has a dedicated 12-bit time base that

produ ces the bit cl ock. The bit clock r ate (period ) is set

by writing a non-zero 12-bit value to the BCG<11:0>

control bits in the DCICON3 SFR.

When the BCG<11:0> bits are set to zero, the bit clock

will be disabled . If the BCG<11:0> bit s are set to a non-

zero value, the bit clock generator is enabled. These

bits shou ld be set t o ‘0’ and the CSCKD bit set to ‘1’ if

the seri al clo ck for t he DCI is r ece ived from an ext ernal

device.

The formula for the bit clock frequency is given in

Equation 18-2.

EQUATION 18-2: BIT CLOCK FREQUENCY

The required bit clock frequency will be determined by

the system sampling rate and frame size. Typical bit

clock frequencies range from 16x to 512x, the con-

verter sample rate depending on the data converter

and the communication protocol that is used.

To achieve bit clock frequencies associated with com-

mon audio sampling rates, the user will need to select

a crystal frequency that has an ‘even’ binary value.

Examples of such crystal frequencies are listed in

Table 18-1.

TABLE 18-1: DEVICE FREQUENCIES FOR COMMON CODEC CSCK FREQUENCIES

FBCK = FCY

2 (BCG + 1)

•

FS (KHz) FCSCK/FSFCSCK (MHz)(1) FOSC (MHZ)PLLFCY (MIPS) BCG(2)

8 256 2.048 8.192 4 8.192 1

12 256 3.072 6.144 8 12.288 1

32 32 1.024 8.192 8 16.384 7

44.1 32 1.4112 5.6448 8 11.2896 3

48 64 3.072 6.144 16 24.576 3

Note 1: When the CSCK signal is applied external ly (CSCKD = 1), the external clock high and low times must meet

the device timing requirements.

2: When the CSCK signal is applied externally (CSCKD = 1), the BCG<11:0> bits have no effect on the

operation of the DCI module.

dsPIC30F6011/6012/6013/6014

18.3.8 SAMPLE CLOCK EDGE

CONTROL BIT

The sample clock edge (CSCKE) control bit determines

the sam pling edge for the CSCK si gnal. If the C SCK bit

is cleared (default), data will be sampled on the falling

edge of the CSCK signal. The AC-Link protocols and

most Multi-Channel formats require that data be sam-

pled on the falling edge of the CSCK signal. If the

CSCK bi t is set, da ta will be sampl ed on the rising edg e

of CSCK. The I2S protocol requires that data be

sampled on the rising edge of the CSCK signal.

18.3.9 DATA JUSTIFICATION

CONTROL BIT

In most applications, the data transfer begins one

CSCK cycle after the COFS signal is sampled active.

This is the de fault conf igura tion of t he DCI module. An

alternate data alignment can be selected by setting the

DJST control bit in the DCICON1 SFR. When DJST = 1,

data transfers will begin during the same CSCK cycle

when the COFS signal is sampled active.

18.3.10 TRANSMIT SLOT ENABLE BITS

The TSCON SFR has control bits that are used to

enable up t o 16 ti me sl ots for tran smis sion. The se co n-

trol bits are t he TSE <15 :0> bi ts. Th e siz e of ea ch time

slot is determined by the WS<3:0> word size selection

bits and can vary up to 16 bits.

If a transmit tim e slot is enabl ed via one of the TSE bit s

(TSEx = 1), the contents of the current transmit shadow

buff er locatio n will be lo aded into the CSDO Sh ift regis-

ter and the DCI buffer control unit is incremented to

point to the next location.

During an u nus ed t r ansmit time slo t, the CS DO pi n wil l

drive ‘0’s or will be tri-stated during all disabled time

slots depending on the state of the CSDOM bit in the

DCICON1 SFR.

The dat a frame size in bit s is determine d by the chosen

data word size and the number of data word elements

in the frame. If the chosen frame size has less than 16

elements, the additional slot enable bits will have no

effect.

Each tran smit dat a word is written to the 16-bit trans mit

buffer as lef t just ified da ta. If th e sele cted wo rd size is

less than 16 bits, then the LSbs of the transmit buffer

memory will have no ef fect on the transmitted data. The

user should write ‘0’s to the unused LSbs of each

transmit buffer location.

18.3.11 RECEIVE SLOT ENABLE BITS

The RSCON SFR cont ains control bit s that are used to

enable up to 16 time slots for reception. These control

bits are the RSE<15:0> bits. The size of each receive

time slot is determined by the WS<3:0> word size

selection bits and can va ry fr om 1 to 16 bits.

If a recei ve t im e sl ot i s e nab led vi a one of the RS E bits

(RSEx = 1), the sh ift register conte nt s will be w ritte n to

the curre nt D CI rec ei ve shad ow b uffer locati on and the

buffer control unit will be incremented to point to the

next buffer location.

Data is not packed in the receive memory buffer loca-

tions if the selected w ord size is less than 16 bits . Each

received slot data word is stored in a separate 16-bit

buffer location. Data is always stored in a left justified

format in the receive memory buffer.

18.3.12 SL O T ENA BL E BITS OP ER AT IO N

WITH FRAME SYNC

The TSE and RSE control bits operate in concert with

the DCI frame sync generator. In the Master mode, a

COFS signal is generated whenever the frame sync

generator is reset. In the Slave mode, the frame sync

generato r is reset whenev er a COFS pulse is receive d.

The TSE and R SE control bit s all ow up to 16 co ns ecu-

tive time slots to be enabled for transmit or receive.

After the last enabled time slot has been transmitted/

received, the DCI will stop buffering data until the next

occurring COFS pulse.

18.3.13 SYNCHRONOUS DATA

TRANSFERS

The DCI buffer control unit will be incremented by one

word location whenever a given time slot has been

enabled for transmission or reception. In most cases,

data input and output transfers will be synchronized,

which means that a data sample is received for a given

channel at the sam e ti me a data sampl e is t r ans mi tte d.

Therefore, th e trans mit a nd rec eive buf fers will be fille d

with equal amounts of data when a DCI interrupt is

generated.

In some cases, the amount of data transmitted and

rece ived dur ing a data fr ame may no t be eq ual . As an

example, assume a two-word data frame is used. Fur-

thermore, assume that data is only received during

slot #0 but is transmitted during slot #0 and slot #1. In

this c ase, the bu ffer cont rol unit counter would be incre-

mented twice during a data frame but only one receive

dsPIC30F6011/6012/6013/6014

18.3.14 BUFFER LENGTH CONTROL

The amount of data that is buffered between interrupts

is dete rmined by the buf fer le ngth (BLEN< 1:0> ) contro l

bit s in the DCI CON2 SFR. T he size of the transm it and

receive buffers may be varied from 1 to 4 data words

using the BLEN control bits. The BLEN control bits are

compared to the current value of the DCI buffer control

unit address counter. When the 2 LSbs of the DCI

address counter match the BLEN<1:0> value, the

buffer control unit will be reset to ‘0’. In addition, the

contents of the receive shadow registers are trans-

ferred to the receive buffer registers and the contents

of the transmit buffer registers are transferred to the

transmit shadow registers.

18.3.15 BUFFER ALI GNME N T WITH DATA

FRAMES

There is no direct coupling between the position of the

AGU address pointer and the data frame boundaries.

This mea ns tha t t here will be an im pl ied ass ign me nt of

each transmit and receive buffer that is a function of the

BLEN control bits and the number o f enabled dat a slots

via the TSE and RSE control bits.

As an example, assume that a 4-word data frame is

chosen and that we want to transmit on all four time

slots in the frame. This configuration would be estab-

lished by setting the TSE0, TSE1, TSE2, and TSE3

control bits in the TSCON SFR. With t his module s etup,

the TXBUF0 register would be naturally assigned to

slot #0, the TXBUF1 register would be naturally

assigned to slot #1, and so on.

18.3.16 TRANSMIT STATUS BITS

There are two transmit status bits in the DCISTA T SFR.

The TMPTY bit i s set when th e con tent s o f the t ransm it

buffer registers are transferred to the transmit shadow

registers. The TMPTY bit may be polled in software to

determine when the transmit buffer registers may be

written. The TMPTY bit is cleared automatically by the

hardware when a write to one of the four transmit

buffers occurs.

The T UNF bi t is re ad onl y a nd indicate s t hat a trans m it

underflow has occurred for at least one of the transmit

buff er registers that is in use. The TUNF bit is set at the

time the transmit buffer registers are transferred to the

transmit shadow registers. The TUNF status bit is

cleared automatically when the buffer register that

underflowed is written by the CPU.

18.3.17 RECEIVE STATUS BITS

There are tw o re cei ve st a tus bits in the DC ISTAT SFR.

The RFUL st atus bit is read onl y and indicate s that new

data is availa ble in the rec eive buf fers . The RFUL bit is

cleared automatically when all receive buffers in use

have been read by the CPU.

The ROV status bit is read only and indicates that a

receive overflow has occurred for at least one of the

receive buffer locations. A receive overflow occurs

when the buffer location is not read by the CPU before

new dat a is transfe rred from the sha dow regis ters. Th e

ROV st atus bit is clea red auto matic ally when th e b uff er

When a receive overflow occurs for a specific buffer

location, the old contents of the buffer are overwritten.

Note: When more than four time slots are active

within a data frame, the user code must

keep track of which time slots are to be

read/written at each interrupt. In some

cases, the alignment between transmit/

receive buffers and their respective slot

assignments could be lost. Examples of

such cases include an emulation break-

point or a hardware trap. In these situa-

tions, th e user should po ll the SLOT st atus

bits to determine what data should be

loaded into the buffer registers to

resynchronize the software with the DCI

module.

Note: The transmit status bits only indicate sta-

tus for b uffer locations that are used by the

module. If the buffer length is set to less

than four words, for example, the unused

buffer locations will not affect the transmit

statu s bits.

Note: The re ceive s tatus bits only ind icate st atus

for buffer locations that are used by the

module. If the buffer length is set to less

than four words, for example, the unused

buffer locations will not affect the transmit

statu s bits.

dsPIC30F6011/6012/6013/6014

18.3.18 SLOT STATUS BITS

The SLOT<3:0> status bits in the DCISTAT SFR indi-

cate the current active time slot. These bits will corre-

spond t o the value o f the frame sy nc generator counter .

The user may poll these status bits in software when a

DCI interrupt occurs to determine what time slot data

was last received and which time slot data should be

loaded into the TXBUF registers.

18.3.19 CSD O MODE BIT

The CSDOM control bit controls the behavior of the

CSDO pin during unused transmit slots. A given trans-

mit time slot is unused if it’s corresponding TSEx bit in

the TSCON SFR is cleared.

If the C SDOM bit is clea red (defaul t), the C SDO pin wil l

be low during unused time slot periods. This mode will

be used when there are only two devices attached to

the serial bus.

If the CSDOM bit is se t, the CSDO pin will be tri-s t ate d

during unu sed time slot peri ods. This mode allow s mul-

tiple devices to share the same CSDO line in a multi-

channel application. Each device on the CSDO line is

configured so that it will only transmit data during

specific time slots. No two devices will transmit data

during the same time slot.

18.3.20 DIGITAL LOOPBACK MODE

Digital Loopback mode is enabled by setting the

DLOOP control bit in the DCISTAT SFR. When the

DLOOP bit is set, the module internally connects the

CSDO signal to CSDI. The actual data input on the

CSDI I/O pin will be ignored in Digital Loopback mode.

18.3.21 UNDERFLOW MODE CONTROL BIT

When an underflow occurs, one of two actions may

occur depending on the state of the Underflow mode

(UNFM) control bit in the DCICON1 SFR. If the UNFM

bit is cleared (default), the module will transmit ‘0’s on

the C SDO pin duri ng t he a cti ve ti me sl ot for t he bu ffer

location. In this Operating mode, the Codec device

attached to the DCI module will simply be fed digital

‘silence’. If the UNFM control bit is set, the module will

transmi t the la st dat a writte n to the buf fer loc ation. This

Operating mode permits the user to send continuous

data to the Codec device without consuming CPU

overhead.

18.4 DCI Module Interrupts

The frequency of DCI module interrupts is dependent

on the BLEN<1:0> control bits in the DCICON2 SFR.

An interrupt to the CPU is generated each time the set

buffer length has been reached and a shadow register

transfer takes place. A shadow register transfer is

defined as the time when the previously written TXBUF

values are transf erred to the trans mit sh adow regis ter s

and new received values in the receive shadow

registers are transferred into the RXBUF registers.

18.5 DCI Module Operation During CPU

Sleep and Idle Modes

18.5.1 DCI MODULE OPERATION DURING

CPU SLEEP MODE

The DCI module has the ability to operate while in

Sleep mod e and wak e the C PU when th e CSCK signa l

is supplied by an external device (CSCKD = 1). The

DCI module will generate an asynchronous interrupt

when a DC I buffer t ransfer has co mpleted and th e CPU

is in Sleep mode.

18.5.2 DCI MODULE OPERATION DURING

CPU IDLE MODE

If the DCISIDL control bit is cleared (default), the mod-

ule wil l continue to operate normal ly even in Id le mode.

If the DCISIDL bit is set, the module will halt when Idle

mode is asserted.

18.6 AC-Link Mode Operation

The AC-L in k p roto co l i s a 2 56 -bit fram e w ith on e 1 6-b it

data slot, followed by twelve 20-bit data slots. The DCI

module has two Operating modes for the AC-Link pro-

tocol. These Operating modes are selected by the

COFSM<1:0> control bits in the DCICON1 SFR. The

first AC-Link mode is called ‘16-bit AC-Link mode’ and

is selected by setting COFSM<1:0> = 10. The seco nd

AC-Link mode is called ‘20-bit AC-Link mode’ and is

selected by se tting COFSM<1:0> = 11.

18.6.1 16-BIT AC-LINK MODE

In the 16-bit AC-Link mode, data word lengths are

restricted to 16 bits. Note that this restriction only

affects the 20-bit data time slots of the AC-Link proto-

col. For received time slots, the incoming data is simply

truncate d to 16 bit s. For outgoing tim e slots, the 4 LSb s

of the data w ord are s et to ‘ 0’ by the modul e. This trun-

cation of the time slots limits the A/D and DAC data to

16 bit s but p ermits proper da ta ali gnment in t he TXBUF

and RXBUF reg isters. Ea ch RXBUF and TXBUF regis -

ter will contain one data time slot value.

18.6.2 20-BIT AC-LINK MODE

The 20-bit AC -Link mode al lows all bits in the dat a time

slot s to be trans mitted and rece ived but doe s not main-

tain data alignment in the TXBUF and RXBUF

registers.

The 20-bit AC -Lin k mo de fun ct ions similar to the Mult i-

Channel mode of the DCI module, except for the duty

cycle of th e fra me sy nchronization si gna l. The AC-Lin k

frame s ynchro nizat ion sign al sh oul d rema in hig h for 1 6

CSCK cycles and should be low for the following

240 cycles.

dsPIC30F6011/6012/6013/6014

The 20-bit mode treats each 256-bit AC-Link frame as

sixteen, 16-bit time slots. In the 20-bit AC-Link mode,

the module operates as if COFSG<3:0> = 1111 and

WS<3:0> = 1111. The data alignment for 20-bit data

slots is ignored. For example, an entire AC-Link data

frame can be transmitted and received in a packed

fashion by setting all bits in the TSCON and RSCON

SFRs. Since the total available buffer length is 64 bits,

it would take 4 consecutive interrupts to transfer the

AC-Link frame. The application software must keep

track of the current AC-Link frame segment.

18.7 I2S Mode Operatio n

The DCI module is configured for I2S mode by writing

a value of ‘01’ to the COFSM<1:0> control bits in the

DCICON1 SFR. When operating in the I2S mode, the

DCI module will generate frame synchronization sig-

nals with a 50% duty cycle. Each edge of the frame

synchronization signal marks the boundary of a new

data word transfer.

The user must also select the frame length and data

word size using the COFSG and WS control bits in the

DCICON2 SFR.

18.7.1 I2S FRAME AND DATA WORD

LENGTH SELECTION

The WS and COFSG control bit s are set to produce the

period for one half of an I2S data frame. That is, the

frame length is the total number of CSCK cycles

required for a left or a right data word transfer.

The BLEN bits must be set fo r the desired buffer le ngth.

Setting BLEN<1:0> = 01 will p r od uc e a C P U i n te rr u pt ,

once per I2S fr ame.

18.7.2 I2S DATA JUSTIFICATION

As per the I2S specification, a data wo rd transfer will, by

default, begin one CSCK cycle after a transition of the

WS signal. A ‘MS bit left justified’ option can be

selected using the DJST control bit in the DCICON2

SFR.

If DJST = 1, the I2S data transfers will be MSb left jus-

tified. The MSb of the data word will be presented on

the CSDO pin during the same CSCK cycle as the ris-

ing or falling edge of the COFS signal. The CSDO pin

is tri-stated after the data word has been sent.

dsPIC30F6011/6012/6013/6014

TABLE 18-2: DCI REGISTER MAP

SFR Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

DCICON1 0240 DCIEN — DCISIDL — DLOOP CSCKD CSCKE COFSD UNFM CSDOM DJST — — — COFSM1 COFSM0 0000 0000 0000 0000

DCICON2 0242 — — — — BLEN1 BLEN0 — COFSG<3:0> — WS<3:0> 0000 0000 0000 0000

DCICON3 0244 — — — — BCG<11:0> 0000 0000 0000 0000

DCISTAT 0246 — — — — SLOT3 SLOT2 SLOT1 SLOT0 — — — — ROV RFUL TUNF TMPTY 0000 0000 0000 0000

TSCON 0248 TSE15 TSE14 TSE13 TSE12 TSE11 TSE10 TSE9 TSE8 TSE7 TSE6 TSE5 TSE4 TSE3 TSE2 TSE1 TSE0 0000 0000 0000 0000

RSCON 024C RSE15 RSE14 RSE13 RSE12 RSE11 RSE10 RSE9 RSE8 RSE7 RSE6 RSE5 RSE4 RSE3 RSE2 RSE1 RSE0 0000 0000 0000 0000

RXBUF0 0250 Receive Buffer #0 Data Register 0000 0000 0000 0000

RXBUF1 0252 Receive Buffer #1 Data Register 0000 0000 0000 0000

RXBUF2 0254 Receive Buffer #2 Data Register 0000 0000 0000 0000

RXBUF3 0256 Receive Buffer #3 Data Register 0000 0000 0000 0000

TXBUF0 0258 Transmit Buffer #0 Data Register 0000 0000 0000 0000

TXBUF1 025A Transmit Buffer #1 Data Register 0000 0000 0000 0000

TXBUF2 025C Transmit Buffer #2 Data Register 0000 0000 0000 0000

TXBUF3 025E Transmit Buffer #3 Data Register 0000 0000 0000 0000

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

19.0 12-BIT ANALOG-TO-DIGITAL

CONVERTER (A/D) MODULE

The 12-bit Analog-to-Digital Converter (ADC) allows

conversion of an analog input signal to a 12-bit digital

number. This module is based on a Successive

Approximation Register (SAR) architecture and pro-

vides a maximum sampling rate of 200 ksps. The AD C

module has up to 16 analog inputs which are multi-

plexed into a sample and hold amplifier. The output of

the sample and hold is the input into the converter

which generates the result. The analog reference volt-

age is software selectable to either the device supply

voltage (AVDD/AVSS) or the voltage level on the

(VREF+/VREF-) pin. The ADC has a unique feature of

being able to operate while the device is in Sleep mode

with RC oscillator selection.

The ADC module has six 16-bit registers:

• ADC Control Register 1 (ADCON1)

• ADC Control Register 2 (ADCON2)

• ADC Control Register 3 (ADCON3)

• ADC Input Select Register (ADCHS)

• ADC Port Configuration Register (ADPCFG)

• ADC Input Scan Selection Register (ADCSSL)

The ADCON1, ADCON2 and ADCON3 registers con-

trol the operation of the A/D module. The ADCHS reg-

ister selects the input channels to be converted. The

ADPCFG register configures the port pins as analog

inputs or as digital I/O. The ADCSSL register selects

input s for sca nni ng .

The block diagram of the 12-bit ADC module is shown

in Figure 19-1.

FIGURE 19-1: 12-BIT ADC FUNCTIONAL BLOCK DIAGRAM

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046).

Note: The SSRC<2:0>, ASAM, SMPI<3:0>,

BUFM and ALTS bits, as well as the

ADCON3 and ADCSSL registers, must

not be written to while ADON = 1. This

would lead to indeterminate results.

Comparator

12-bit SAR Conversion Logic

REF

DAC

Data

16-word, 12-bit

Dual Port

RAM

Bus Inte rfac e

AN12

0000

0101

0111

1001

1101

1110

1111

1100

0001

0010

0011

0100

0110

1000

1010

1011

AN13

AN14

AN15

AN8

AN9

AN10

AN11

AN4

AN5

AN6

AN7

AN0

AN1

AN2

AN3

CH0

AN1

REF

Sample/Sequence

Control

Sample

Input MU X

Control

Input

Switches

S/H

Format

dsPIC30F6011/6012/6013/6014

19.1 ADC Result Buffer

The module contains a 16-word dual port read only

buff er, call ed ADCBUF0...ADCBUFF, to buffer the ADC

results. The RAM is 12 bits wide but the data obtained

is represented in one of four different 16-bit data for-

mats. The contents of the sixteen A/D Conversion

Result Buffer registers, ADCBUF0 through ADCBUFF,

cannot be written by user software.

19.2 Conversion Operation

After the ADC mo dule has been configured, the sample

acquisition is started by setting the SAMP bit. Various

sources, such as a programmable bit, timer time-outs

and extern al event s, will ter minate acq uisition and st art

a conversion. When the A/D conversion is complete,

the result is loaded into ADCBUF0...ADCBUFF, and

the DONE bit and the A/D interrupt flag ADIF are set after

the number of samples specified by the SMPI bit. The

ADC module can be configured for different interrupt

rates as described in Section 19.3 “Selecting the

Conversion Sequence”.

The following steps should be followed for doing an

A/D conversion:

1. Configure the ADC module:

• Configure analog pins, voltage reference and

digital I/O

• Select ADC input channels

• Select ADC co nversion clock

• Select ADC conversion trigger

• Turn on ADC module

2. Configure ADC interrupt (if required):

• Clear ADIF bit

• Select ADC interrupt priority

3. Start sampling.

4. Wait the required acquisition time.

5. Trigger acquisition end, start conversion:

6. Wait for A/D conversion to complete, by either:

• Waiting for the ADC interrupt, or

• Waiting for the DONE bit to get set.

7. Read ADC result buffer, clear ADIF if required.

19.3 Selecting the Convers ion

Sequence

Several groups of control bits select the sequence in

which the A/D connects inputs to the sample/hold

channel, converts a channel, writes the buffer memory

and generates interrupts.

The sequence is controlled by the sampling clocks.

The SMPI bits select the number of acquisition/

convers io n s eq uen ce s that woul d b e p erfo rmed before

an interrupt occurs. This can vary from 1 sample per

interrupt to 16 samples per interrupt.

The BUFM bit will split the 16-word results buffer into

two 8-word groups. Writing to the 8-word buffers will be

alternated on each interrupt event.

Use of the BUFM bit will depend on how much time is

available for the moving of the buffers after the

interrupt.

If the processor can quickly unload a full buffer within

the time it takes to acquire and convert one channel,

the B UFM bit can be ‘0’ a nd up to 16 conv ersio ns (c or-

responding to the 16 input channels) may be done per

interrupt. The processor will have one acquisition and

conversion time to move the sixteen conversions.

If the processor cannot unload the buffer within the

acquisition and conversion time, the BUFM bit should be

‘1’. For example, if SMPI<3:0> (ADCON2<5:2>) = 0111,

then eight conversions will be loaded into 1/2 of the

buffer, following which an interrupt occurs. The next

eight conversions w ill b e load ed into the o ther 1/2 o f the

buffer. The processor will have the entire time between

interrupts to move the eig ht convers ions.

The ALTS bit can be used to alternate the inputs

selected during the sampling sequence. The input

multiplexer has two sets of sample inputs: MUX A and

MUX B. If the ALTS bit i s ‘0’, onl y the MUX A input s are

selected for sampling. If the ALTS bit is ‘1’ and

SMPI<3:0> = 0000 on the first sample/convert

sequence, the MUX A inputs are selected and on the

next acquire/convert sequence, the MUX B inputs are

selected.

The CSCNA bit (ADCON2<10>) will allow the multi-

plexer input to be alternately scanned across a

select ed number of analog i nputs for the MUX A g roup.

The inputs are selected by the ADCSSL register. If a

particular bit in the ADCSSL register is ‘1’, the corre-

sponding input is selected. The inputs are always

scanne d from low er to higher numbered in puts, st arting

after each interrupt. If the number of inputs selected is

greate r than the number of s amples ta ken per int errupt,

the higher numbered inputs are unused.

dsPIC30F6011/6012/6013/6014

19.4 Programming the S tar t of

Conversion Trigger

The conversion trigger will terminate acquisition and

start the requested conversions.

The SSRC<2:0> bits select the source of the conver-

sion tri gger . The SSRC bi ts provide fo r up to 4 alterna te

sources of conversion trigger.

When SSRC<2:0> = 000, the conversion trigger is

under software control. Clearing the SAMP bit will

cause the co nve r si on trigger.

When SSRC<2:0> = 111 (Auto-Start mode), the con-

version trigger is under A/D clock control. The SAMC

bits select the number of A/D clocks between the start

of acquis ition and the st art of conversi on. This provide s

the fastest conversion rates on multiple channels.

SAMC must always be at least 1 clock cycle.

Other trigger sources can come from timer modules or

external interrupts.

19.5 Aborting a Conversion

Clearing the ADON bit during a conversion will abort

the cu rrent conv ersion a nd stop the sam pling s equenc-

ing until the next sampling trigger . The ADCBUF will not

be updated with the partially completed A/D conversion

sample. That is, the ADCBUF will continue to contain

the value of the last completed conversion (or the last

value written to the ADCBUF register).

If the clearing of the ADON bit coincides with an auto-

start, the clearing has a higher priority and a new

conversion will not start.

19.6 Selecting the ADC Conversion

Clock

The ADC conversion requires 14 TAD. The source of

the AD C conv ersio n clo ck is softw are s elect ed, u sing a

six-bit counter. There are 64 possible options for TAD.

EQUATION 19-1: ADC CONVERSION

CLOCK

The internal RC oscillator is selected by setting the

ADRC bit.

For correct ADC conversions, the ADC conversion

clock (TAD) must be se lec t ed to en su re a minimu m TAD

time of 334 nsec (for VDD = 5V). Refer to the Electrical

Specifications section for minimum TAD under other

operating conditions.

Example 19-1 shows a sample calculation for the

ADCS<5:0> bits, assuming a device operating speed

of 30 MIPS.

EXAMPLE 19-1: ADC CONVERSION

CLOCK AND SAMPLING

RATE CALCULATION

TAD = T CY * (0.5 * (ADCS<5:0> + 1))

Minimu m TAD = 334 nsec

ADCS<5:0> = 2 – 1

TAD

TCY

TCY = 33 .33 nsec (30 MIPS)

= 2 • – 1

334 ns ec

33.33 nsec

= 19.04

Therefore,

Set ADCS<5 :0> = 19

Actual TAD = (ADCS<5:0> + 1)

TCY

= (19 + 1)

33.33 ns e c

= 334 ns ec

If SSRC<2:0> = ‘111’ and SAMC<4:0> = ‘00001’

Since,

Sampling Time = Acquisition Time + Conversion Time

= 1 TAD + 14 TAD

= 15 x 334 nsec

Therefore,

Sampling Rat e =

= ~200 kHz

(15 x 33 4 ns e c)

dsPIC30F6011/6012/6013/6014

19.7 ADC Speeds

The dsPIC 30F 12-bit ADC specif ications permit a ma x-

imum of 20 0 ksp s sampli ng rate. The t able bel ow sum-

marize s the conversio n speeds for t he dsPIC30F 12-b it

ADC and the required operating conditions.

TABLE 19-1: 12-BIT ADC EXTENDED CONVERSION RATES

dsPIC30F 12-bit ADC Conversion Rates

Speed TAD

Minimum Sampling

Time Min Rs Max VDD Temperature Channels Configuration

Up to 200

ksps(1) 334 ns 1 TAD 2.5 kΩ4.5V to 5.5V -40°C to +85°C

Up to 100

ksps 668 ns 1 TAD 2.5 kΩ3.0V to 5.5V -40°C to +125°C

Note 1: External VREF- and VREF+ pins must be used for correct operation. See Figure 19-2 for recommended

circuit.

REF

-V

REF

ADC

ANx S/H CH

REF

-V

REF

ADC

ANx S/H CH

ANx or V

REF

dsPIC30F6011/6012/6013/6014

The following figure depicts the recommended circuit

for the conversion rates above 200 ksps. The

dsPIC30F6014 is shown as an example.

FIGURE 19-2: ADC VOLTAGE REFERENCE SCHEMATIC

The configuration procedures below give the required

setup values for the conversion speeds above 100

ksps.

19.7.1 200 KSPS CONFIGURATION

GUIDELINE

The following configuration items are required to

achieve a 200 ksps conversion rate.

• Compl y with con di t ion s provided in Table 19-2.

• Connect external VREF+ and VREF- pins following

the recommended circuit shown in Figure 19-2.

• Set SSRC<2.0> = 111 in the ADCO N1 regist er to

enable the auto convert option .

• Enable automatic sampling by setting the ASAM

control bit in the ADCON1 register.

• Write the SMPI<3 .0> con trol bit s in the ADCON2

between interrupts.

• Configure the ADC clock period to be:

by writing to the ADCS<5:0> control bits in the

ADCON3 register.

• Configure the sampling time to be 1 TAD by

writing: SAMC<4:0> = 00001.

The following figure shows the timing diagram of the

ADC running at 200 ksps. The T AD selection in conjunc-

tion with the guidelines described above allows a con-

version speed of 200 ksp s. See Ex ample 19-1 for cod e

example.

VDD

VSS

VDD

VREF-

VREF+

AVDD

AVSS

VSS

VDD

VSS

22 80

dsPIC30F6014

VDD

0.1 μFC1

0.01 μFR1

1 μF

VDD

0.1 μF

VDD

0.01 μF

AVDD

1 μF

AVDD

0.1 μF

AVDD

0.01 μF

See Note 1:

Note 1: Ensure adequate bypass capacitors are provided on each VDD pin.

(14 + 1) x 200,000 = 334 ns

dsPIC30F6011/6012/6013/6014

FIGURE 19-3: CONVERTING 1 CHANNEL AT 200 KSPS, AUTO-SAMPLE START, 1 TAD

SAMPLING TIME

TCONV

= 14 TAD

TSAMP

= 1 TAD TSAMP

= 1 TAD

ADCLK

SAMP

DONE

ADCBUF0

ADCBUF1

Instruction Execution BSET ADCON1, ASAM

TCONV

= 14 TAD

dsPIC30F6011/6012/6013/6014

19.8 A/D Acquisition Requirements

The analog input model of the 12-bit A/D converter

is shown inFigure 19-4. The total sampling time for the

A/D is a function of the internal amplifier settling time

and the holding capacitor charge time.

For the A/D converter to meet its specified accuracy,

the charge holding capacitor (CHOLD) must be allowed

to fully charge to the voltage level on the analog input

pin. The source impedance (RS), the interconnect

impedance (RIC), and the internal sampling switch

(RSS) impedance combine to directly affect the time

required to cha rge the c ap acitor C HOLD. The combined

impedance of the analog sources must therefore be

small enough to fully charge the holding capacitor

within the c hos en s am ple tim e. To minimiz e the ef fects

of pin leak age curren ts o n the accura cy of the A/D co n-

verter, the maximum recommended source imped-

ance, RS, is 2.5 kΩ. After the analog input channel is

selected (changed), this sampling function must be

comple ted prior to s tarti ng the con versi on. The int ernal

holding capacitor will be in a discharged state prior to

each sample operation.

FIGURE 19-4: 12-BIT A/D CONVERTER ANALOG INPUT MODEL

CPIN

Rs ANx VT = 0.6V

VT = 0.6V I leakage

RIC ≤ 250ΩSampling

Switch

RSS

CHOLD

= DAC capacitance

VSS

VDD

= 18 pF

± 500 nA

Legend: CPIN

I leakage

RIC

RSS

CHOLD

= input capacitance

= threshold voltage

= leakage current at the pin due to

= interconnect resistance

= sampling switch resistance

= sample/hold ca pacitance (from DAC)

various junctions

Note: CPIN value depends on device package and is not tested. Effect of CPIN negligible if Rs ≤ 2.5 kΩ.

RSS ≤ 3 kΩ

dsPIC30F6011/6012/6013/6014

19.9 Module Power-down Modes

The module has 2 internal Power modes.

When the ADON bit is ‘1’, the module is in Active mode;

it is fully powered and functional.

When AD ON is ‘0’, the modul e is in Of f mo de. The dig-

ital and analog portions of the circuit are disabled for

maximum curr ent savings.

In order to return to the Acti ve mode from O ff mode, th e

user must wait for the ADC circuitry to stabilize.

19.10 ADC Operation During CPU Sleep

and Idle Modes

19.10.1 ADC OPERATION DURING CPU

SLEEP MODE

When the de vice ente rs Sleep mod e, all cl ock sources

to the module are shutdow n and stay at logic ‘0’.

If Sleep occurs in the middle of a conversion, the con-

version is aborted. The converte r will not c onti nue with

a partially completed conversion on exit from Sleep

mode.

entering or leaving Sleep mode.

The ADC module can operate during Sleep mode if the

ADC clock source is set to RC (ADRC = 1). When the

RC clock source is selected, the A/D module waits one

instruction cycle before starting the conversion. This

allows the SLEEP instru ction t o be ex ecuted which elim-

inates all digital switching noise from the conversion.

When the conversion is complete, th e CONV bit will be

cleared and the result loaded into the ADCBUF register.

If the A/D interrupt is enabled, the device will wake-up

from Sleep. If the A/D interrupt is not enable d, the ADC

module will then be turned off, although the ADON bit

will remain set.

19.10.2 A/D OPERATION DURING CPU IDLE

MODE

The ADSIDL bit select s if the mod ule will stop on Idle or

continue on Idle. If ADSIDL = 0, the module will con-

tinue operation on assertion of Idle mode. If ADSIDL =

1, the module will stop on Idle.

19.11 Effects of a Reset

A device Reset forces all registers to their Reset state.

This forces the ADC module to be turned off, and any

conversion and sampling sequence is aborted. The val-

ues that ar e in th e ADCBUF reg isters are not m odifie d.

The A/D Res ult registe r will cont ain unkno wn dat a after

a Power-on Rese t.

19.12 Output Formats

The ADC re su lt i s 12 bits wide. The dat a b uffer RAM i s

also 12 b it s wid e. The 12 -bit data can be read in one of

four different formats. The FORM<1:0> bits select the

format. Each of the outpu t format s trans lates t o a 16-bit

result on the data bus.

FIGURE 19-5: ADC OUTPUT DATA FORMATS

RAM Contents: d11 d10 d09 d08 d07 d06 d05 d04 d03 d02 d01 d00

Read to Bus:

Signed Fractional d11 d10d09d08d07d06d05d04d03d02d01d000000

Fractional d11d10d09d08d07d06d05d04d03d02d01d000000

Signed Integer d11 d11 d11 d11 d11 d10 d09 d08 d07 d06 d05 d04 d03 d02 d01 d00

Integer 0000d11d10d09d08d07d06d05d04d03d02d01d00

dsPIC30F6011/6012/6013/6014

19.13 Configuring Analog Port Pins

The use of the ADPC FG and TRIS registers control the

operation of the ADC port pins. The port pins that are

desired as analog inputs must have their correspond-

ing TRIS bit set (input). If the TRIS bit is cleared (out-

put), the digital output level (VOH or VOL) will be

converted.

The ADC operation is independent of the state of the

CH0SA<3:0>/CH0SB<3:0> bits and the TRIS bits.

When reading the Port register, all pins configured as

analog input channels will read as cleare d.

Pins configured as digital inp uts will not convert an ana-

log input. Analog levels on any pin that is defined as a

digital input (including the ANx pins) may cause the

input buffer to consume current that exceeds the

device specifications.

19.14 Connection Considerations

The anal og inp uts h ave diod es to VDD and V SS as ESD

protection. This requires that the analog input be

betwee n VDD and VSS. If the input voltage exceeds this

range by greater th an 0.3V (eit her direct ion), one o f the

diodes becomes forward b iased and it may damage the

device if the input curre nt specificati on is exce ede d.

An external RC filter is sometimes added for anti-

aliasi ng of the input signal. The R component should be

select ed to ens ure that th e sampl ing time requirem ents

are satisfied. Any external components connected (via

high impedance) to an analog input pin (capacitor,

zener diode, etc.) should have very little leakage

current at the pin.

dsPIC30F6011/6012/6013/6014

TABLE 19-2: A/D CONVERTER REGISTER MAP

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

ADCBUF0 0280 — — — — ADC Data Buffer 0 0000 uuuu uuuu uuuu

ADCBUF1 0282 — — — — ADC Data Buffer 1 0000 uuuu uuuu uuuu

ADCBUF2 0284 — — — — ADC Data Buffer 2 0000 uuuu uuuu uuuu

ADCBUF3 0286 — — — — ADC Data Buffer 3 0000 uuuu uuuu uuuu

ADCBUF4 0288 — — — — ADC Data Buffer 4 0000 uuuu uuuu uuuu

ADCBUF5 028A — — — — ADC Data Buffer 5 0000 uuuu uuuu uuuu

ADCBUF6 028C — — — — ADC Data Buffer 6 0000 uuuu uuuu uuuu

ADCBUF7 028E — — — — ADC Data Buffer 7 0000 uuuu uuuu uuuu

ADCBUF8 0290 — — — — ADC Data Buffer 8 0000 uuuu uuuu uuuu

ADCBUF9 0292 — — — — ADC Data Buffer 9 0000 uuuu uuuu uuuu

ADCBUFA 0294 — — — — ADC Data Buffer 10 0000 uuuu uuuu uuuu

ADCBUFB 0296 — — — — ADC Data Buffer 11 0000 uuuu uuuu uuuu

ADCBUFC 0298 — — — — ADC Data Buffer 12 0000 uuuu uuuu uuuu

ADCBUFD 029A — — — — ADC Data Buffer 13 0000 uuuu uuuu uuuu

ADCBUFE 029C — — — — ADC Data Buffer 14 0000 uuuu uuuu uuuu

ADCBUFF 029E — — — — ADC Data Buffer 15 0000 uuuu uuuu uuuu

ADCON1 02A0 ADON —ADSIDL— — — FORM<1:0> SSRC<2:0> —— ASAM SAMP DONE 0000 0000 0000 0000

ADCON2 02A2 VCFG<2:0> —— CSCNA ——BUFS— SMPI<3:0> BUFM ALTS 0000 0000 0000 0000

ADCON3 02A4 — — — SAMC<4:0> ADRC — ADCS<5:0> 0000 0000 0000 0000

ADCHS 02A6 — — — CH0NB CH0SB<3:0> — — — CH0NA CH0SA<3:0> 0000 0000 0000 0000

ADPCFG 02A8 PCFG15 PCFG14 PCFG13 PCFG12 PCFG11 PCFG10 PCFG9 PCFG8 PCFG7 PCFG6 PCFG5 PCFG4 PCFG3 PCFG2 PCFG1 PCFG0 0000 0000 0000 0000

ADCSSL 02AA CSSL15 CSSL14 CSSL13 CSSL12 CSSL11 CSSL10 CSSL9 CSSL8 CSSL7 CSSL6 CSSL5 CSSL4 CSSL3 CSSL2 CSSL1 CSSL0 0000 0000 0000 0000

Legend: u = uninitialized bit

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

20.0 SYSTEM INTEGRATION

There are several features intended to maximize sys-

tem reliability, minimize cost through elimination of

external components, provide power-saving operating

modes and of fer code protection:

• Oscillator Selection

• Reset

- Power-on Reset (POR)

- Power-up Timer (PWRT)

- Oscillator Start-up Timer (OST)

- Programmable Brown-out Reset (BOR)

• Watchdog Timer (WDT)

• Low-Voltage Detect

• Power-Saving Modes (Sleep and Idle)

• Code Protection

• Unit ID Locations

• In-Circuit Serial Programming (ICSP)

dsPIC30F devices have a Watchdog Timer which is

permanently enabled via the Configuration bits or can

be software controlled. It runs off its own RC oscillator

for added reliability. There are two timers that offer

necessary delays on power-up. One is the Oscillator

Start-up Timer (OST), intended to keep the chip in

Reset until the crystal oscillator is stable. The other is

the Power-u p Timer (PWR T) which prov ides a delay on

power-u p only, designed to keep the part in R eset while

the power supply stabilizes. With these two timers

on-chip, most applications need no external Reset

circuitry.

Sleep mode is designed to offer a very low-current

Power-down mode. The user can wake-up from Sleep

through external Reset, Watchdog Timer wake-up, or

through an inte rrupt. Several os cillator opti ons are also

made available to allow the part to fit a wide variety of

applications. In the Idle mode, the clock sources are

still active but the CPU is shut off. The RC oscillator

option saves system cost while the LP crystal option

saves power.

20.1 Oscillator System Overview

The dsPIC30F oscillator system has the following

modules and features:

• Various external and internal oscillator options as

clock sources

• An on-chip PLL to boost internal operating

frequency

• A clock switching mechanism between various

clock sources

• Programm abl e c loc k pos t s ca ler for system po w er

savings

• A Fail-Safe Clock Monitor (FSCM) that detects

clock failure and takes fail-safe measures

• Clock Control register (OSCCON)

• Configuration bits for main oscillator selection

Table 20-1 p rovides a summary of the dsPIC30F Oscil-

lator Operating modes. A simplified diagram of the

oscillator system is shown in Figure 20-1.

Configuration bits determine the clock source upon

Power-on Reset (POR) and Brown-out Reset (BOR).

Thereafter, the clock source can be changed between

permiss ible c lock sourc es. The O SCCO N registe r co n-

trols the clock switching and reflects system clock

related status bits.

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157).

dsPIC30F6011/6012/6013/6014

TABLE 20-1: OSCILLATOR OPERATING MODES

Oscillator Mode Description

XTL 200 kHz-4 MHz crystal on OSC1:OSC2.

XT 4 MHz-10 MHz crystal on OSC1:OSC2.

XT w/PLL 4x 4 MHz-10 MHz crystal on OSC1:OSC2, 4x PLL enabled.

XT w/PLL 8x 4 MHz-10 MHz crystal on OSC1:OSC2, 8x PLL enabled.

XT w/PLL 16x 4 MHz-10 MHz crystal on OSC1:OSC2, 16x PLL enabled(1).

LP 32 kHz crystal on SOSCO:SOSCI(2).

HS 10 MHz-25 MHz crystal.

EC External clock input (0-40 MHz).

ECIO External clock input (0-40 MHz), OSC2 pin is I/O.

EC w/PLL 4x External clock input (4-10 MHz), OSC2 pin is I/O, 4x PLL enabled(1).

EC w/PLL 8x External clock input (4-10 MHz), OSC2 pin is I/O, 8x PLL enabled(1).

EC w/PLL 16x External clock input (4-7.5 MHz), OSC2 pin is I/O, 16x PLL enabled(1).

ERC External RC oscillator, OSC2 pin is FOSC/4 output(3).

ERCIO External RC oscillator, OSC2 pin is I/O(3).

FRC 7.37 MHz internal RC oscillator.

LPRC 512 kHz internal RC oscillator.

Note 1: dsPIC30F maximum operating frequency of 120 MHz must be met.

2: LP oscillator can be conveniently shared as system clock, as well as real-time clock for Timer1.

3: Requires external R and C. Frequency operation up to 4 MHz.

dsPIC30F6011/6012/6013/6014

FIGURE 20-1: OSCILLATOR SYSTEM BLOCK DIAGRAM

Primary

OSC1

OSC2

SOSCO

SOSCI

Oscillator

32 kHz LP

Clock

and Control

Block

Switching

Oscillator

x4, x8, x16

PLL

Primary

Oscillator

Stability Detector

Secondary

Oscillator

Programmable

Clock Divider

Oscillator

Start-up

Timer

Fail-Safe Clock

Monitor (FSCM)

Internal Fast RC

Oscillator (FRC)

Internal Low

Power RC

Oscillator (LPRC)

PWRSAV Instruction

Wake-up Request

Oscillator Configuration bits

System

Clock

Oscillator Trap

to Timer1

LPRC

FRC

Secondary Osc

POR Done

Primary Osc

FPLL

POST<1:0>

FCKSM<1:0> 2

PLL

Lock COSC<1:0>

NOSC<1:0>

OSWEN

dsPIC30F6011/6012/6013/6014

20.2 Oscillator Configurations

20.2.1 INITIAL CLOCK SOURCE

SELECTION

While coming out of Power-on Reset or Brown-out

Reset, th e device sel ects its clock source based on:

a) FOS<1:0> Configuration bits that select one of

four oscillator groups,

b) and FPR<3:0 > Configurati on bits tha t select one

of 13 o scillat or choic es within the prim ary grou p.

The selection is as shown in Table 20-2.

TABLE 20-2: CONFIGURATION BIT VALUES FOR CLOCK SELECTION

20.2.2 O SCIL LA TOR START-UP TIMER

(OST)

In order to ensure that a crystal oscillator (or ceramic

resonator) has started and stabilized, an Oscillator

Start-up Timer is included. It is a simple 10-bit counter

that counts 1024 TOSC cycles before releasing the

oscil lator clock t o th e rest of the syste m. The t ime-ou t

period is designated as TOST. The TOST time is

involv ed ev ery time the osci lla tor has to res t art (i.e., on

POR, BOR and wake-up from Sleep). The Oscillator

Start-up Timer is applied to the LP oscillator, XT, XTL,

and HS modes (upon wake-up from Sleep, POR and

BOR) for the primary oscillator.

20.2.3 LP OSCILLATOR CONTROL

Enabling the LP oscillator is controlled with two

elements:

1. The current oscillator group bits COSC<1:0>.

2. The LP OSCEN bit (OSCO N regis ter).

The LP oscillator is on (even during Sleep mode) if

LPOSCEN = 1. The LP oscillator is the device clock if:

• COSC<1:0> = 00 (LP selected as main oscillator)

and

• LPOSCEN = 1

Keeping th e LP oscillator on at all times allows for a fast

switch to the 32 kHz system clock for lower power oper-

ation. Returning to the faster main oscillator will still

require a start-up time.

Oscillator Mode Oscillator

Source FOS1 FOS0 FPR3 FPR2 FPR1 FPR0 OSC2

Function

EC Primary 111011 CLKO

ECIO Primary 111100 I/O

EC w/ PLL 4x Primary 111101 I/O

EC w/ PLL 8x Primary 111110 I/O

EC w/ PLL 16x Primary 111111 I/O

ERC Primary 111001 CLKO

ERCIO Primary 111000 I/O

XT Primary 110100 OSC2

XT w/ PLL 4x Primary 110101 OSC2

XT w/ PLL 8x Primary 110110 OSC2

XT w/ PLL 16x Primary 110111 OSC2

XTL Primary 11000X OSC2

HS Primary 11001X OSC2

LP Secondary 0 0 ————(Notes 1, 2)

FRC Internal FRC 0 1 ————(Notes 1, 2)

LPRC Internal LPRC 1 0 ————(Notes 1, 2)

Note 1: OSC2 pin function is determined by the Primary Oscillator mode selection (FPR<3:0>).

2: OSC1 pin cannot be used as an I/O pin even if the secondary oscillator or an internal clock source is

selected at all times.

dsPIC30F6011/6012/6013/6014

20.2.4 PHASE LOCKED LOOP (PLL)

The PLL multi plies the clock wh ic h is gen era ted by the

primary oscillator. The PLL is selectable to have either

gains of x4, x8, and x16. Input and output frequency

ranges are summarized in Table 20-3.

TABLE 20-3: PLL FREQUENCY RANGE

The PLL fea tures a lo ck out put which is assert ed whe n

the PLL enters a phase locked state. Should the loop

fall out of lock (e.g ., due to nois e), the lock signal will b e

rescinded. The state of this signal is reflected in the

read only LOCK bit in the OSCC ON regis ter.

20.2.5 FAST RC OSCILLATOR (FRC)

The FRC oscillator is a fast (7.37 MHz ±2% nominal)

inter nal RC o scil lat or. This osci llator is inten ded to p ro-

vide reasonable device operating speeds without the

use of an external crystal, ceramic resonator, or RC

network.

The dsPIC3 0F o pera t es fro m th e F RC o sc illator when-

ever the current oscillator selection control bits in the

OSCCON register (COSC<13:12>) are set to ‘01’.

The four bit field specified by TUN<3:0> (OSCCON

<15:14> and OSCCON<11:10>) allows the user to tune

the internal fast RC oscillator (nominal 7.37MHz). The

user c an tune the FR C osci llator wit hin a r ange of -12%

(or -960 kHz) to +10.5% (or +840 kHz) in steps of

1.50% around the factory-calibrated setting, see

Table 20-4.

TABLE 20-4: FRC TUNING

20.2.6 LOW POWER RC OSCILLATOR

(LPRC)

The LPRC oscillator is a component of the Watchdog

Timer (WDT) and oscillates at a nominal frequency of

512 kHz. The LPRC oscillator is the clock source for

the Power-up Timer (PWRT) circuit, WDT, and clock

monitor circuits. It may also be used to provide a low

frequency clock source option for applications where

power consumption is critical and timing accuracy is

not required

The LPRC oscillator is always enabled at a Power-on

Reset because it is the clock source for the PWRT.

After the PWRT expires, the LPRC oscillator will

remain on if one of the following is TRUE:

• The Fail-Safe Clock Monitor is enabled

• The WDT is enabled

• The LPRC oscillator is selected as the system

clock via the COSC<1:0> control bits in the

OSCCON register

If one of the above conditions is not true, the LPRC will

shut off after the PWRT expires.

20.2.7 FAIL-SAFE CLOCK MONITOR

The Fail-Saf e Cl oc k Mo nito r (FSCM) all ow s the devic e

to conti nue to o pe rate eve n in th e even t of an oscil lator

failure. The FSCM func tio n i s e nab led by approp ria tel y

programming the FCKSM Configuration bits (clock

switch and m onito r sel ecti on bits ) in th e FOSC Device

Config uration regi ster. If the FSCM funct ion is enab led,

the LPRC in tern al o sc il lato r w ill run a t all tim es (exce pt

during Sl eep mode) and will not be s ubject to co ntrol by

the SWDTEN bit.

In the event of an oscillator failure, the FSCM will gen-

erate a clock failure trap event and will switch the sys-

tem cloc k o ve r to the FR C osc il lat or. The user wil l the n

have the op tion to either atte mpt to restart the osc illator

or execu te a controlled shutdown. The user may decide

to treat th e tra p a s a warm Reset b y sim pl y loa din g th e

Reset address into the oscillator fail trap vector. In this

event, the CF (Clock Fail) status bit (OSCCON<3>) is

also set whenever a clock failure is recognized.

In the event of a clock failure, the WDT is unaffected

and continues to run on the LPRC clock.

FIN PLL

Multiplier FOUT

4 MHz-10 MHz x4 16 MHz-40 MHz

4 MHz-10 MHz x8 32 MHz-80 MHz

4 MHz-7.5 MHz x16 64 MHz-120 MHz

TUN<3:0>Bits FRC Frequency

0111 + 10.5%

0110 + 9.0%

0101 + 7.5%

0100 + 6.0%

0011 + 4.5%

0010 + 3.0%

0001 + 1.5%

0000 Center Frequency (oscillator is

running at calibrated frequency)

1111 - 1.5%

1110 - 3.0%

1101 - 4.5%

1100 - 6.0%

1011 - 7.5%

1010 - 9.0%

1001 - 10.5%

1000 - 12.0%

Note 1: OSC2 pin function is determined by the

Primary Oscillator mode selection

(FPR<3:0>).

2: OSC1 pin cannot be used as an I/O pin

even if the secondary oscillator or an

internal clock source is selected at all

times.

dsPIC30F6011/6012/6013/6014

If th e oscillator h as a very slow st art-up time coming out

of POR, BOR or Sleep, it is possible that the PWRT

timer will expire before the oscillator has started. In

such ca se s, the FSCM wil l be act ivated and the FSCM

will i nitiate a c lock failu re trap, and the COSC<1 :0> bit s

are lo aded with FRC os cillator sele ction. This wil l effe c-

tively shut off the original oscillator that was trying to

start.

The user may detect this situation and restart the

oscillator in the clock fail trap ISR.

Upon a clock failure detection, the FSCM module will

initiate a clock switch to the FRC oscillator as follows:

1. The COSC bits (OSCCON<13:12>) are loaded

with the FRC oscillator selection value.

2. CF bit is set (OSCCON<3>).

3. OSWEN control bit (OSCCON<0>) is cleared.

For the purpose of clock switching, the clock sources

are sectioned into four groups:

1. Primary

2. Secondary

3. Intern al FRC

4. Intern al LPRC

The user can switch between these functional groups

but canno t switch between opt ions within a group. If the

primary group is selected, then the choice within the

group is always determined by the FPR<3:0>

Configuration bits.

The OSC CON register h olds the co ntrol and status bits

related to clock switching.

• COSC<1:0>: Read-only status bits always reflect

the current oscillator group in effect.

• NOSC<1:0>: Control bits which are written to

indicate the new oscillator group of choice.

- On POR and BOR, COSC<1:0> and

NOSC<1:0> are both loaded with the

Configuration bit values FOS<1:0>.

• LOCK: The LOCK status bit indicates a PLL lock.

• CF: Read only status bit indicating if a clock fail

detect has occurred.

• OSWEN: Control bit changes from a ‘0’ to a ‘1’

when a clock transition sequence is initiated.

Clearing the OSWEN control bit will abort a clock

transition in progress (used for hang-up

situations).

If Configuration bits FCKSM<1:0> = 1x, then the clock

switching and Fail-Safe Clock monitoring functions are

disabled. This is the default Configuration bit setting.

If clock switching is disabled, then the FOS<1:0> and

FPR<3:0> bits directly control the oscillator selection

and the C OSC<1:0> b its do not contro l the clock selec-

tion. However, these bits will reflect the clock source

selection.

20.2.8 PROTECTION AGAINST

ACCIDENTAL WRITES TO OSCCON

A write to the OSCCON regis ter is intentionally made

difficult because it controls clock switching and clock

scaling.

To write to the OSCCON low byte, the following code

sequence must be executed without any other

instructions in between:

Byte wri te is allo wed for one i nstruction cycle. W rite the

desired value or use bit manipulation instruction.

To write to the OSCCON high byte, the following

instructions must be executed without any other

instructions in between:

Byte wri te is allo wed for one i nstruction cycle. W rite the

desired value or use bit manipulation instruction.

Note: The application should not attempt to

switch to a clock of frequency lower than

100 KHz when the fail-safe clock monitor is

enabled. If such clock switching is

performed, the device may generate an

oscillator fail trap and switch to the Fast RC

oscillator.

Byte Write “0x46” to OSCCON low

Byte Write “0x57” to OSCCON low

Byte Write “0x78” to OSCCON high

Byte Write “0x9A” to OSCCON high

dsPIC30F6011/6012/6013/6014

20.3 Reset

The dsPIC30F differentiates between various kinds of

Reset:

a) Power-on Reset (POR)

b) MCLR Reset during normal operation

c) MCLR Reset during Sleep

d) Watchdog Timer (WDT) Reset (during normal

operation)

e) Programmable Brown-out Reset (BOR)

f) RESET Inst ruction

g) Reset caused by trap lockup (TRAPR)

h) Reset caused by illegal opcode or by using an

uninitialized W register as an address pointer

(IOPUWR)

Dif fer ent regi sters a re a ffe cted in dif fe rent w ays by var-

ious Reset conditions. Most registers are not affected

by a WD T wake-u p since th is is view ed as the resum p-

tion of normal operation. Status bits from the RCON

situations, as indicated in Table 20-5. These bits are

used in s oftwa re to dete rmi ne th e na ture of the Reset.

A block d iag ram of the On -C hi p Res et C ircui t is sho w n

in Figure 20-2.

A MCLR noise filter is provided in the MCLR Reset

path. The filter detects and ignores small pulses.

Internall y generated Res ets do not drive MCLR pi n low .

FIGURE 20-2: RESET SYSTEM BLOCK DIAGRAM

20.3.1 PO R: POW ER-O N RESE T

A power-on event will generate an internal POR pulse

when a VDD rise is detected. The Reset puls e will occur

at the POR circuit threshold voltage (VPOR) which is

nominally 1.85V. The device supply voltage character-

istics mus t meet spec ified sta rting v olt ag e and rise ra te

requirements. The POR pulse will reset a POR timer

and place the device in the Reset state. The POR also

selects the device clock source identified by the

oscillator configuration fuses.

The POR circuit inserts a small delay, TPOR, which is

nominally 10 μs and ensures that the device bias cir-

cuits are stable. Furthermore, a user selected power-

up time-out (TPWRT) is applied. The TPWRT pa ra me te r

is based on device Configuration bits and can be 0 ms

(no delay ), 4 ms, 16 ms , or 64 ms . The total delay is at

device power-up, TPOR + TPWRT. When these delays

have expired, SYSRST will be negated on the next

leading edge of the Q1 clock a nd the PC will j ump to the

Reset vector.

The timing for the SYSRST signal is shown in

Figure 20-3 through Figure 20-5.

MCLR

VDD

VDD Rise

Detect POR

SYSRST

Sleep or Idle

Brown-out

Reset BOREN

RESET

Instruction

WDT

Module

Digital

Glitch Filter

BOR

Trap Conflict

Illegal Opcode/

Uninitialized W Register

dsPIC30F6011/6012/6013/6014

FIGURE 20-3: TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD)

FIGURE 20-4: TIME-OUT SEQUENCE ON POWER-UP (MCLR NOT TIED TO VDD): CASE 1

FIGURE 20-5: TIME-OUT SEQUENCE ON POWER-UP (MCLR NOT TIED TO VDD): CASE 2

TPWRT

TOST

VDD

INTERNAL POR

PWRT TIME-OUT

OST TIME-OUT

INTERNAL Reset

MCLR

TPWRT

TOST

VDD

INTERNAL POR

PWRT TIME-OUT

OST TIME-OUT

INTERNAL Reset

MCLR

VDD

MCLR

INTERNAL POR

PWRT TIME-OUT

OST TIME-OUT

INTERNAL Reset

TPWRT

TOST

dsPIC30F6011/6012/6013/6014

20.3.1.1 POR with Long Crystal Start-up Time

(with FSCM Enabled)

The osci ll ator s t art-up circuit r y is not linked to the POR

circuitry. Some crystal circuits (especially low fre-

quency crystals) will have a relatively long start-up

time. Th erefore, one or more of the foll owing condit ions

is possible after the POR timer and the PWRT have

expired:

• The oscillator circuit has not begun to oscillate.

• The Osc ill ato r Start-up Timer ha s not expi red (if a

crystal oscillator is used).

• The PLL has not achieved a L OCK (if PLL is

used).

If th e FSCM is enabled and one of th e above c onditions

is true, then a clock failure trap will occur. The device

will automatically switch to the FRC oscillator and the

user can switch to the desired crystal oscillator in the

trap ISR.

20.3.1.2 Operating without FSCM and PWRT

If the FSCM is disabled and the Power-up Timer

(PWRT) is also disabled, then the device will exit rap-

idly from Reset on power-up. If the clock source is

FRC, LPRC, EXTRC or EC, it will be active

immediately.

If the FSCM is disabled and the system clock has not

start ed, the de vice w ill be in a frozen st ate at th e Res et

vector until the system clock starts. From the user’s

perspective, the device will appear to be in Reset until

a system clock is available.

20.3.2 BO R: PRO GR A MMABLE

BROWN-OUT RESET

The BOR (Brown-out Reset) module is based on an

internal voltage reference circuit. The main purpose of

the BOR mod ul e is to ge nera t e a d evic e R eset w he n a

brown-out condition occurs. Brown-out conditions are

generally caused by glitches on the AC mains (i.e.,

missing portions of the AC cycle waveform due to bad

power tr ansmission lines, or voltage sags due to exces-

sive current draw when a larg e in duc tiv e l oad is turne d

on).

The BOR module allows selection of one of the

following voltage trip points (see Table 2 3-11):

•2.6V-2.71V

•4.1V-4.4V

• 4.58V-4.73V

A BOR will generate a Reset pulse whi ch will rese t the

device. The BOR will select the clock source based on

the device Configuration bit values (FOS<1:0> and

FPR<3:0>). Furthermore, if an Oscillator mode is

selected, the BOR will activate the Oscillator Start-up

Timer (OST). The system clock is held until OST

expires. If the PLL is used, then the clock will be held

until the LOCK bit (OSCCON<5>) is ‘1’.

Concurrently, the POR time-out (TPOR) and the PWRT

time-out (TPWRT) will be applied before the internal Reset

is rele as ed . If TPWRT = 0 and a crystal oscillato r is being

used, then a nominal delay of TFSCM = 100 μs is applied.

The total delay in this case is (TPOR + TFSCM).

The B OR status bit (RCON <1>) wi ll be set to indic ate

that a BOR has occurred. The BOR circuit, if enabled,

will continue to operate while in Sleep or Idle modes

and wi ll reset the de vice shoul d VDD fall below the BOR

threshold voltage.

FIGURE 20-6: EXTERNAL POWER-ON

RESET CIRCUIT (FOR

SLOW VDD POWER-UP)

Note: The BOR voltage trip points indicated here

are nominal values provided for design

guidance only. Refer to the Electrical

Specifications in the specific device data

sheet for BOR voltage limit specifications.

Note: Dedicated supervisory devices, such as

the MCP1XX and MCP8XX, may also be

used as an external Power-on Reset

circuit.

Note 1: External Power-on Reset circuit is required

only if the VDD power-up slope is too slow.

The diode D helps discharge the capacitor

quickly when VDD powers down.

2: R should be suitably chosen so as to make

sure that the voltage drop across R does not

violate the device’s electrical specifications.

3: R1 should be suitably chosen so as to limit

any current flowing into MCLR from exte r n al

capacitor C, in the event of MCLR/VPP pin

breakdown due to Electrostatic Discharge

(ESD), or Electrical Overst ress (EO S).

VDD

dsPIC30F

MCLR

dsPIC30F6011/6012/6013/6014

Table 20-5 shows the Reset conditions for the RCON

are R/W , the information in the table implies that all the

bits are negated prior to the action specified in the

conditi on column.

TABLE 20-5: INITIALIZATION CONDITION FOR RCON REGISTER: CASE 1

Condition Program

Counter TRAPR IOPUWR EXTR SWR WDTO IDLE SLEEP POR BOR

Power-on Reset 0x000000 0 0 0 0 0 0 0 1 1

Brown-out Reset 0x000000 0 0 0 0 0 0 0 0 1

MCLR Reset during normal

operation 0x000000 0 0 1 0 0 0 0 0 0

Software Reset during

normal ope rati on 0x000000 0 0 0 1 0 0 0 0 0

MCLR Reset during Sleep 0x000000 0 0 1 0 0 0 1 0 0

MCLR Reset during Idle 0x000000 0 0 1 0 0 1 0 0 0

WDT Time- out R eset 0x000000 0 0 0 0 1 0 0 0 0

WDT Wake-up PC + 2 0 0 0 0 1 0 1 0 0

Interrupt Wake-up from

Sleep PC + 2(1) 000000100

Clock Failure Trap 0x000004 0 0 0 0 0 0 0 0 0

Trap Reset 0x000000 1 0 0 0 0 0 0 0 0

Illegal Operation Trap 0x000000 0 1 0 0 0 0 0 0 0

Legend: u = unchanged, x = unknown

Note 1: W hen the wak e-up is du e to an ena bled inter rupt, the PC is loade d with the c orrespond ing interrupt v ector.

dsPIC30F6011/6012/6013/6014

Table 20-6 shows a second example of the bit

conditions for the RCON register. In this case, it is not

assu med th e use r has s et/ cle ared s peci fic bits pr ior to

action specified in the condition column.

TABLE 20-6: INITIALIZATION CONDITION FOR RCON REGISTER: CASE 2

Condition Program

Counter TRAPR IOPUWR EXTR SWR WDTO IDLE SLEEP POR BOR

Power-on Reset 0x000000 0 0 0 0 0 0 0 1 1

Brown-out Reset 0x000000 u u u u u u u 0 1

MCLR Reset during normal

operation 0x000000 u u 1 0 0 0 0 u u

Software Reset during

normal ope rati on 0x000000 u u 0 1 0 0 0 u u

MCLR Reset during Sleep 0x000000 u u 1 u 0 0 1 u u

MCLR Reset during Idle 0x000000 u u 1 u 0 1 0 u u

WDT Time- out R eset 0x000000 u u 0 0 1 0 0 u u

WDT Wake-up PC + 2 u u u u 1 u 1 u u

Interrupt Wake-up from

Sleep PC + 2(1) uuuuuu1uu

Clock Failure Trap 0x000004 u u u u u u u u u

Trap Reset 0x000000 1 u u u u u u u u

Illegal Operation Reset 0x000000 u 1 u u u u u u u

Legend: u = unchanged

Note: When the wake-up is due to an enabl ed interrupt, th e PC is loaded with the correspondi ng interrupt v ector .

dsPIC30F6011/6012/6013/6014

20.4 Watchdog Ti mer (WDT)

20.4.1 WATCHDOG TIMER OPERATION

The primary function of the Watchdog Timer (WDT) is

to reset the processor in the event of a software mal-

function. The WDT is a free-running timer which runs

off an on-chip RC oscil lator, requi ring no e xte rnal com -

ponent. Th erefore, the WDT timer w ill continue to oper-

ate even if the main processor clock (e.g., the crystal

oscillator) fails.

20.4.2 ENABLING AND DISABLING

THE WDT

The Watchdog Timer can be “enabled” or “disabled”

only through a Configuration bit (FWDTEN) in the

Configu ration register, FWDT.

Setting FWDTEN = 1 enables the W atchdog T imer . The

enabling is done when programming the device. By

default, af ter chip erase, FWDTEN bit = 1. A ny device

programmer capable of programming dsPIC30F

devices allo ws programming of this and other

Configuration bits.

If enabled, the WDT will increment until it overflows or

“times out”. A WDT time-out will force a device Reset

(except during Sleep). To prevent a WDT time-out, the

user must clear the Watchdog Timer using a CLRWDT

instruction.

If a WDT times out during Sleep, the device will wake-

up. The WDT O bit in the RCO N register wil l be cleare d

to indicate a wake-up resulting from a WDT time-out.

Setting FWDTEN = 0 allows user software to enable/

disable the Watchdog Timer via the SWDTEN

(RCON<5>) control bit.

20.5 Low-Voltage Detect

The Low-Voltage Detect (LVD) module is used to

detect when the VDD of the device drops below a

threshold value, VLVD, which is determined by the

LVDL<3:0> bits (RCON<11:8>) and is thus user pro-

grammable. The internal voltage reference circuitry

requires a nominal amount of time to stabilize, and the

BGST bit (R CON<13>) indicat es wh en the voltage

reference has stabilized.

In some devices, the LVD threshold voltage may be

applied extern al ly on the LVDIN pin.

The LVD module is enabled by setting the LVDEN bit

(RCON<12>).

20.6 Power Saving Modes

There are tw o powe r-savin g st ates that c an be en tered

through the execu tio n of a s pe ci al ins truc tion, PWRSAV.

These are Sleep and Idle.

The format of the PWRSAV instruction is as follows:

PWRSAV <parameter>, where ‘parameter’ def ines

Idle or Sleep mode.

20.6.1 SL EE P MODE

In Sleep m ode, th e clo ck to the C PU and periphe rals i s

shutdown. If an on-chip oscillator is being used, it is

shutdown.

The Fail-Safe Clock Monitor is not functional during

Sleep since there is no clock to monitor. However,

LPRC clock remains active if WDT is operational durin g

Sleep.

The brown-out protection circuit and the Low-Voltage

Detect circuit, if enabled, will remain func tional during

Sleep.

The processor wakes up from Sleep if at least one of

the following conditions has occurred:

• any interrupt that is individually enabled and

meets the required priority level

• any Reset (POR, BOR and MCLR)

• WDT time-out

On waking up from Sleep mode, the processor will

resta rt the sam e clock th at was active prior to en try into

Sleep mode. When clock switching is enabled, bits

COSC<1:0> will determine the oscillator source that

will be used on wake-up. If clock switch is disabled,

then there is only one system clock.

If the clock source is an oscillator, the clock to the

device will be held off until OST times out (indicating a

stable oscillator). If PLL is used, the system clock is

held off until LOCK = 1 (indicating that the PLL is

stab le). I n eit her c ase, TPOR, T LOCK and TPWRT delay s

are applied.

If EC, FRC, LPRC o r EXTRC o scillato rs are used, then

a delay of TPOR (~ 10 μs) is applied. This is the smallest

delay possible on wake-up from Sleep.

Moreover, if LP oscillator was active during Sleep and

LP is the oscillator used on wake-up, then the start-up

delay will be equal to TPOR. PWRT delay and OST

timer de lay are not appli ed. In or der to ha ve -the smal l-

est poss ible sta rt-up delay when waking up fro m Sleep,

one of these faste r wake-up optio ns shoul d be selecte d

before entering Sleep.

Note: If a POR or BOR occurred, the selection of

the oscillator is based on the FOS<1:0>

and FPR<3:0> Configuration bits.

dsPIC30F6011/6012/6013/6014

Any interrupt that is individually enabled (using the cor-

responding IE bit) and meet s the prevailing priority level

will be able to wake-up the processor . The processor will

process the interrupt and branch to the ISR. The Sleep

status bit in the R CON register is se t upon wa ke-up.

All Resets will wake-up the processor from Sleep

mode. Any Reset, other than POR, will set the Sleep

status bit. In a POR, the Sleep bit is cleared.

If the Watchdog Timer is enabled, then the processor

will wake-up from Sleep mode u pon WDT time-out. Th e

Sleep and WDTO status bits are both set.

20.6.2 IDLE MODE

In Idle mode, the clock to the CPU is shutdown while

periphera ls keep running. Unlike Sleep mode, the clock

sour ce rem ains active .

Several peripherals have a control bit in each module

that allows them to operate during Idle.

LPRC Fail-Safe Clock remains active if clock failure

detect is enabled.

The processor wakes up from Idle if at least one of the

following conditions has occurred:

• any interrupt that is individually enabled (IE bit is

‘1’) and meets the r equired priority level

• any Reset (POR, BOR, MCLR)

• WDT time-out

Upon wake-up from Idle mode, the clock is re-applied

to the CPU and instruction execution begins immedi-

ately, starting with the instructi on fol low i ng the PWRSAV

instruction.

Any interrupt that is individually enabled (using IE bit)

and meets the prevailing priority level will be able to

wake-up th e processor. The proce ss or wil l p roc es s th e

interrupt and branch to the ISR. The Idle status bit in

the RCON register is set upon wake-up.

Any Reset other than POR will set the Idle status bit.

On a POR, the Idle bit is cleared.

If Watchdog Timer is enabled, then the processor will

wake-up from Idle mode upon WDT time-out. The Idle

and WDTO status bits are both set.

Unlike wake-up from Sleep, there are no time delays

involv ed in wa ke -up from Idle.

20.7 Device Configuration Registers

The Configuration bits in e ach device co nfiguration reg-

ister specify some of the device modes and are

prog ramme d by a de vice prog ra mmer, or by using the

In-Circuit Serial Programming (ICSP) feature of the

device. Each device configuration register is a 24-bit

used to hold configuration data. There are four device

configuration registers available to the user:

1. FOSC (0xF80000): Oscillator Configuration

2. FWDT (0xF80002): Watchdog Timer

Configu ration Register

3. FBORPOR (0xF80004): BOR and POR

Configu ration Register

4. FGS (0xF8000A): General Code Segment

Configu ration Register

The placement of the Configuration bits is automati-

cally ha ndled when you sel ect the device in your device

programmer . The desired state of the Configuration bit s

may be sp ecified i n the source code (depen dent on the

languag e tool used ), or through th e programming inter-

face. After the device has been programmed, the appli-

cation software may read the Configuration bit values

through the table read instructions. For additional infor-

mation, plea se refer to the programmin g sp eci fic ati on s

of the device.

Note: In spite of various delays applied (TPOR,

TLOCK and TPWRT), the crystal oscillator

(and PLL) may not be active at the end of

the time-out (e.g., for low-frequency crys-

tals). In such cases, if FSCM is enabled,

then the device will detect this as a clock

failure and process the clock failure trap, the

FRC oscillator will be enabled and the user

will have to re-enable the crystal oscillator . If

FSCM is not enabled, then the device will

simply su spend e xecuti on of code until the

cloc k i s stable an d w i ll rem a in in Sleep un ti l

the oscillator clock has started.

Note: If the code protection configuration fuse

bits (FGS<GCP> and FGS<GWRP>)

have been programmed, an erase of the

entire code-protected device is only

possib le at vol tages VDD ≥ 4.5V.

dsPIC30F6011/6012/6013/6014

20.8 Peripheral Module Disable (PMD)

Registers

The Peripheral Module Disable (PMD) registers pro-

vide a method to disable a peripheral module by stop-

ping all clock so urc es su ppl ied to that modu le. When a

peripheral is disabled via the appropriate PMD control

bit, the peripheral is in a minimum power consumption

state. The control and status registers associated with

the peripheral will also be disabled so writes to those

registers will have no effect and read values will be

invalid.

A peripheral module will only be enabled if both the

associated bit in the PMD register is cleared and the

peripher al is supported by the specific ds PIC DSC va ri-

ant. If the peripheral is present in the device, it is

enabled in the PMD register by default.

20.9 In-Circuit Debugger

When MPL AB® ICD2 is selecte d as a d ebugger, the in-

circuit debugg ing fun ctiona lity i s enab led. Thi s func tion

allows simple debugging functions when used with

MPLAB IDE. When the device has this feature e nabled,

some of the resources are not available for general

use. These resources include the first 80 bytes of Data

RAM and two I/O pins.

One of four pairs of Debug I/O pins may be selected by

the user using configuration options in MPLAB IDE.

These pin pairs are named EMUD/EMUC, EMUD1/

EMUC1, EMUD2/EMUC2 and EMUD3/EMUC3.

In each c as e, th e se lec te d EMU D p in i s th e Em ula tio n/

Debug Data line, and the EMUC pin is the Emulation/

Debug Clock line. These pins will interface to the

MPLAB ICD 2 module available from Microchip. The

selected pair of Debug I/O pins is used by MPLAB

ICD 2 to send commands and receive responses, as

well as to send and receive data. To use the in-circuit

debugge r function of the device, the design must imple-

ment ICSP connections to MCLR, VDD, VSS, PGC,

PGD, and the selected EMUDx/EMUCx pin pair.

This gives rise to two possibilities:

1. If EMUD/EMUC is s elected as the De bug I/O pin

pair, then only a 5-pin interface is required, as

the EMUD and EMUC pin functions are multi-

plexed with the PGD and PGC pin functions in

all dsPIC30F devices.

2. If EMUD1/EMUC1, EMUD2/EMUC2 or EMUD3/

EMUC3 is selected as the Debug I/O pin pair,

then a 7-pin interface is required, as the

EMUDx/EMUCx pin functions (x = 1, 2 or 3) are

not multiplexed with the PGD and PGC pin

functions.

Note: If a PMD bit is set, the corresponding mod-

ule is d isabled after a delay of 1 instruc tion

cycle. Sim ilarly, if a PM D bit is clea red, th e

corresponding module is enabled after a

delay of 1 instruction cycle (assuming the

module control registers are already

configured to enable module operation).

Note: In the dsPIC30F6011 and dsPIC30F6013

devices, the DCIMD bit is readable and

writable, and will be read as ‘1’ when set.

dsPIC30F6011/6012/6013/6014

TABLE 20-7: SYSTEM INTEGRATION REGISTER MAP

TABLE 20-8: DEVICE CONFIGURATION REGISTER MAP

SFR

Name Addr. Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset State

RCON 0740 TRAPR IOPUWR BGST LVDEN LVDL<3:0> EXTR SWR SWDTEN WDTO SLEEP IDLE BOR POR (Note 1)

OSCCON 0742 TUN3 TUN2 COSC<1:0> TUN1 TUN0 NOSC<1:0> POST<1:0> LOCK —CF— LPOSCEN OSWEN (Note 2)

PMD1 0770 T5MD T4MD T3MD T2MD T1MD —— DCIMD I2CMD U2MD U1MD SPI2MD SPI1MD C2MD C1MD ADCMD 0000 0000 0000 0000

PMD2 0772 IC8MD IC7MD IC6MD IC5MD IC4MD IC3MD IC2MD IC1MD OC8MD OC7MD OC6MD OC5MD OC4MD OC3MD OC2MD OC1MD 0000 0000 0000 0000

Note 1: Reset state depends on type of Reset.

2: Reset state depends on Configuration bits.

3: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

File Name Addr. Bits 23-16 Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0

FOSC F80000 — FCKSM<1:0> — — — — FOS<1:0> ————FPR<3:0>

FWDT F80002 —FWDTEN— — — — — — — — — FWPSA<1:0> FWPSB<3:0>

FBORPOR F80004 — MCLREN — — — — — — —BOREN— BORV<1:0> ——FPWRT<1:0>

FGS F8000A — — — — — — — — — — — — — — — GCP GWRP

Note: Refer to “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

21.0 INSTRUCTION SET SUMMARY

The dsPIC30F instruction set adds many

enhancements to the previous PIC® MCU instruction

sets, while maintaining an easy migration from PIC

MCU instruction sets.

Most instructions are a single program memory word

(24 bits). Only three instructions require two program

memory locations.

Each single word instruction is a 24-bit word divided

into an 8-bit opcode which specifies the instruction

type, and one or more operands which further specify

the operation of the instruction.

The instruction set is highly orthogonal and is grouped

into five bas ic ca tego ries:

• Word or byte-oriented operations

• Bit-oriented operations

• Literal operations

• DSP operations

• Control operations

Table 21-1 shows the general symbols used in

des c ribing t he instructions.

The dsPIC30F instruction set summary in Table 21-2

lists all the instructions, along with the status flags

affected by each instruction.

Most word or byte-oriented W register instructions

(including barrel shift instructions) have three

operands:

• The first source operand which is typically a

• The seco nd source operand which is typi cally a

• The destination of the result which is typically a

However, word or byte-oriented file register

instructions have two operands:

• The file register specified by the value ‘f ’

• The destination, which could either be the file

‘WREG’

Most bit-oriented instructions (including simple rotate/

shift instructions) have two operands:

• The W register (with or without an address

modifier) or file register (specified by the value of

‘Ws’ or ‘f’)

• The bit in the W register or file register

(specified by a literal value or indirectly by the

contents of register ‘Wb’)

The litera l instruct ions that invo lve data m ovement ma y

use some of the following operands:

• A lite ral value to be lo aded i nto a W regi ster or file

• The W register or file register where the literal

value is to be loaded (specified by ‘Wb’ or ‘f’)

However, literal instructions that involve arithmetic or

logical operations use some of the following operands:

• The first source operand which is a register ‘Wb’

without any addre s s modifier

• The second source operand which is a literal

value

• The dest ination of the result (only if not the same

as the first source operand) which is typically a

The MAC class of DSP instructions may use some of the

following operands:

• The accumulator (A or B) to be used (required

operand)

• The W regis ters t o be used as the two operands

• The X and Y address space prefetch operations

• The X and Y address space prefetch destinations

• The accum ula tor wr ite bac k destination

The other DSP instructions do not involve any

multipl ic ati on, and may include:

• The accumul ator to be used (requ ired )

• The source o r destin ation ope rand (des ignated as

Wso or Wdo, respectively) with or without an

address modifier

• The amou nt of s hift sp ecifi ed by a W regis ter ‘Wn ’

or a literal value

The control instructions may use some of the following

operands:

• A program memory address

• The mode of the table read and table write

instructions

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157).

dsPIC30F6011/6012/6013/6014

All instructions are a single word, except for certain

double-word instructions, which were made double-

word instructions so that all the required information is

available in these 48 bits. In the second word, the

8MSbs are ‘0’s. If thi s s e co nd wo r d is ex ec ut e d a s an

instruction (by itself), it will execute as a NOP.

Most single-word instructions are executed in a single

instruc tion cycle, u nle ss a co ndi tional test is tru e or the

program counter is changed as a result of the instruc-

tion. In these cases, the executio n takes tw o instructio n

cycles with the additional instruction cycle(s) executed

as a NOP. Notable exceptions are the BRA (uncondi-

tional/c ompu ted bra nch), i ndirec t CALL/GOTO, al l t abl e

reads and writes, and RETURN/RETFIE instructions,

which a re single -word in struction s but t ake two or thre e

cycles. Certain instructions that involve skipping over

the subsequent instruction require either two or three

cycles if the skip is performed, depending on whether

the instruction being skipped is a single word or two-

word instruction. Moreover, double-word moves

require two cycles. The double-word instructions

execute in two instruction cycles.

Note: For more details on the instruction set,

refer to the “dsPIC30F/33F Programmer’s

Reference Manual” (DS70157)

TABLE 21-1: SYMBOLS USED IN OPCODE DESCRIPTIONS

Field Description

#text Means literal defined by “text”

(text) Means “content of text”

[text] Means “the location addressed by text”

{ } Optional field or operation

<n:m> Register bit field

.b Byte mode selection

.d Double-Word mode selection

.S Shadow register select

.w Word mo de selection (default)

Acc O ne of two accumu lators {A , B}

A WB Accumulator write back destination address register ∈ {W13, [W13]+=2}

bit4 4-bit bit selection field (used in word addressed instruct ions) ∈ {0...15}

C, DC, N, OV, Z M CU status bits: Carry, Digit Carry, Negative, Overflow, St icky Zero

Expr Absolute address, label or expression (resolved by the linker)

f File register address ∈ {0x0000...0x1FFF}

lit1 1 -bit unsigned literal ∈ {0,1}

lit4 4 -bit unsigned literal ∈ {0...15}

lit5 5 -bit unsigned literal ∈ {0...31}

lit8 8 -bit unsigned literal ∈ {0...255}

lit10 10-bit unsigned literal ∈ {0...255} for Byte mode, {0:1023} for Word mode

lit14 14-bit unsigned literal ∈ {0...16384}

lit16 16-bit unsigned literal ∈ {0...65535}

lit23 23-bit unsigned literal ∈ {0...8388608}; LSB must be 0

None Field does not require an entry, may be blank

OA, OB, SA, SB DSP status bits: ACCA Overflow, ACCB Overflow, ACCA Saturate, ACCB Saturate

PC Program Counter

Slit10 10-bit signed literal ∈ {-512...511}

Slit16 16-bit signed literal ∈ {-32768...32767}

Slit6 6-bit signed literal ∈ {-16...16}

dsPIC30F6011/6012/6013/6014

Wb Base W register ∈ {W0..W15}

Wd Destination W register ∈ { Wd , [Wd ], [Wd++], [Wd-- ], [++Wd], [-- Wd] }

Wdo Destination W register ∈

{ Wnd, [Wnd], [Wnd++], [Wnd--], [++Wnd], [--Wnd], [Wnd+Wb] }

Wm,Wn D ivid end, Divisor working register pair (direct addressing)

Wm*Wm Multiplicand and Multiplier working register pair for Square instructions ∈

{W4 * W4,W5 * W5,W6 * W6,W7 * W7}

Wm*Wn Multiplicand and Multiplier working register pair for DSP instructions ∈

{W4 * W5,W4 * W6,W4 * W7,W5 * W6,W5 * W7,W6 * W7}

Wn One of 16 working registers ∈ {W0..W15}

Wnd One of 16 destination working registers ∈ {W0..W15}

Wns One of 16 source working registers ∈ {W0..W15}

WREG W0 (working register used in file register instructions)

Ws Source W register ∈ { Ws, [Ws] , [W s + + ], [Ws--] , [+ + Ws] , [--Ws ] }

Wso Source W register ∈

{ Wns, [Wns], [Wns++], [Wns--], [++Wns], [--Wns], [Wns+Wb] }

Wx X data space prefetch addr ess regist er for DSP instruc tions

∈ {[W8] + = 6, [W8] + = 4, [W8] + = 2, [W8], [W8] - = 6, [W8] - = 4, [W8] - = 2,

[W9] + = 6, [W9] + = 4, [W9] + = 2, [W9], [W9] - = 6, [W9] - = 4, [W9] - = 2,

[W9 + W12],none}

Wxd X data space prefetch destination register for DSP instructions ∈ {W4..W7}

Wy Y data space prefetch addr ess regist er for DSP instruc tions

∈ {[W10] + = 6, [W10] + = 4, [W10] + = 2, [W10], [W10] - = 6, [W10] - = 4, [W10] - = 2,

[W11] + = 6, [W11] + = 4, [W11] + = 2, [W11], [W11] - = 6, [W11] - = 4, [W11] - = 2,

[W11 + W12], none}

Wyd Y data space prefetch destination register for DSP instructions ∈ {W4..W7}

TABLE 21-1: SYMBOLS USED IN OPCODE DESCRIPTIONS (CONTINUED)

Field Description

dsPIC30F6011/6012/6013/6014

TABLE 21-2: INSTRUCTION SET OVERVIEW

Base

Instr

Assembly

Mnemonic Assembly Syntax Description # of

Words # of

Cycles Status Flag s

Affected

1ADD ADD Acc Add Accumulators 1 1 OA,OB,SA,SB

ADD f f = f + WREG 1 1 C,DC,N,OV,Z

ADD f,WREG WREG = f + WREG 1 1 C,DC,N,OV,Z

ADD #lit10,Wn Wd = lit10 + Wd 1 1 C,DC,N,OV,Z

ADD Wb,Ws,Wd Wd = Wb + Ws 1 1 C,DC,N,OV,Z

ADD Wb,#lit5,Wd Wd = Wb + lit5 1 1 C,DC,N,OV,Z

ADD Wso,#Slit4,Acc 16-bit Signed Add to Accumulator 1 1 OA,OB,SA,SB

2ADDC ADDC f f = f + WREG + (C) 1 1 C,DC,N,OV,Z

ADDC f,WREG WREG = f + WREG + (C) 1 1 C,DC,N,OV,Z

ADDC #lit10,Wn Wd = lit10 + Wd + (C) 1 1 C,DC,N,OV,Z

ADDC Wb,Ws,Wd Wd = Wb + Ws + (C) 1 1 C,DC,N,OV,Z

ADDC Wb,#lit5,Wd Wd = Wb + lit5 + (C) 1 1 C,DC,N,OV,Z

3AND AND f f = f .AND. WREG 1 1 N,Z

AND f,WREG WREG = f .AND. WREG 1 1 N,Z

AND #lit10,Wn Wd = lit10 .AND. Wd 1 1 N,Z

AND Wb,Ws,Wd Wd = Wb .AND. Ws 1 1 N,Z

AND Wb,#lit5,Wd Wd = Wb .AND. lit5 1 1 N,Z

4ASR ASR f f = Arithmetic Right Shift f 1 1 C,N,OV,Z

ASR f,WREG WREG = Arithmetic Right Shift f 1 1 C,N,OV,Z

ASR Ws,Wd Wd = Arithmetic Right Shift Ws 1 1 C,N,OV,Z

ASR Wb,Wns,Wnd Wnd = Arithmetic Right Shift Wb by Wns 1 1 N,Z

ASR Wb,#lit5,Wnd Wnd = Arithmetic Right Shift Wb by lit5 1 1 N,Z

5BCLR BCLR f,#bit4 Bit Clear f 1 1 None

BCLR Ws,#bit4 Bit Clear Ws 1 1 None

6BRA BRA C,Expr Branch if Carry 1 1 (2) None

BRA GE,Expr Branch if greater than or equal 1 1 (2) None

BRA GEU,Expr Branch if unsigned greater than or equal 1 1 (2) None

BRA GT,Expr Branch if greater than 1 1 (2) None

BRA GTU,Expr Branch if unsigned greater than 1 1 (2) None

BRA LE,Expr Branch if less than or equal 1 1 (2) None

BRA LEU,Expr Branch if unsigned less than or equal 1 1 (2) None

BRA LT,Expr Branch if less than 1 1 (2) None

BRA LTU,Expr Branch if unsigned less than 1 1 (2) None

BRA N,Expr Branch if Negative 1 1 (2) None

BRA NC,Expr Branch if Not Carry 1 1 (2) None

BRA NN,Expr Branch if Not Negative 1 1 (2) None

BRA NOV,Expr Branch if Not Overflow 1 1 (2) None

BRA NZ,Expr Branch if Not Zero 1 1 (2) None

BRA OA,Expr Branch if Accumulator A overflow 1 1 (2) None

BRA OB,Expr Branch if Accumulator B overflow 1 1 (2) None

BRA OV,Expr Branch if Overflow 1 1 (2) None

BRA SA,Expr Branch if Accumulator A saturated 1 1 (2) None

BRA SB,Expr Branch if Accumulator B saturated 1 1 (2) None

BRA Expr Branch Unconditionally 1 2 None

BRA Z,Expr Branch if Zero 1 1 (2) None

BRA Wn Computed Branch 1 2 None

7BSET BSET f,#bit4 Bit Set f 1 1 None

BSET Ws,#bit4 Bit Set Ws 1 1 None

8BSW BSW.C Ws,Wb Write C bit to Ws<Wb> 1 1 None

BSW.Z Ws,Wb Write Z bit to Ws<Wb> 1 1 None

dsPIC30F6011/6012/6013/6014

9BTG BTG f,#bit4 Bi t Toggl e f 1 1 None

BTG Ws,#bit4 Bit Toggle Ws 1 1 None

10 BTSC BTSC f,#bit4 Bit Test f, Skip if Clear 1 1

(2 or 3) None

BTSC Ws,#bit4 Bit Test Ws, Skip if Clear 1 1

(2 or 3) None

11 BTSS BTSS f,#bit4 Bit Test f, Skip if Set 1 1

(2 or 3) None

BTSS Ws,#bit4 Bit Test Ws, Skip if Set 1 1

(2 or 3) None

12 BTST BTST f,#bit4 Bit Test f 1 1 Z

BTST.C Ws,#bit4 Bit Test Ws to C 1 1 C

BTST.Z Ws,#bit4 Bit Test Ws to Z 1 1 Z

BTST.C Ws,Wb Bit Test Ws<Wb> to C 1 1 C

BTST.Z Ws,Wb Bit Test Ws<Wb> to Z 1 1 Z

13 BTSTS BTSTS f,#bit4 Bit Test then Set f 1 1 Z

BTSTS.C Ws,#bit4 Bit Test Ws to C, then Set 1 1 C

BTSTS.Z Ws,#bit4 Bit Test Ws to Z, then Set 1 1 Z

14 CALL CALL lit23 Call subroutine 2 2 None

CALL Wn Call indirect subroutine 1 2 None

15 CLR CLR f f = 0x00 00 1 1 None

CLR WREG WREG = 0x0000 1 1 None

CLR Ws Ws = 0x0000 1 1 None

CLR Acc,Wx,Wxd,Wy,Wyd,AWB Clear Accumulator 1 1 OA,OB,SA,SB

16 CLRWDT CLRWDT Clear Watchdog Timer 1 1 WDTO,Sleep

17 COM COM f f = f 11 N,Z

COM f,WREG WREG = f 11 N,Z

COM Ws,Wd Wd = Ws 11 N,Z

18 CP CP f Compa re f with WREG 1 1 C,DC,N,OV,Z

CP Wb,#lit5 Compare Wb with lit5 1 1 C,DC,N,OV,Z

CP Wb,Ws Compare Wb with Ws (Wb - Ws) 1 1 C,DC,N,OV,Z

19 CP0 CP0 f Compare f with 0x0000 1 1 C,DC,N,OV,Z

CP0 Ws Compare Ws with 0x0000 1 1 C,DC,N,OV,Z

20 CPB CPB f Comp are f with WREG, with Borrow 1 1 C,DC,N,OV,Z

CPB Wb,#lit5 Compare Wb with lit5, with Borrow 1 1 C,DC,N,OV,Z

CPB Wb,Ws Compare Wb with Ws, with Borrow

(Wb - Ws - C)1 1 C,DC,N,OV,Z

21 CPSEQ CPSEQ Wb, Wn Compare Wb with Wn, skip if = 1 1

(2 or 3) None

22 CPSGT CPSGT Wb, Wn Compare Wb with Wn, skip if > 1 1

(2 or 3) None

23 CPSLT CPSLT Wb, Wn Compare Wb with Wn, skip if < 1 1

(2 or 3) None

24 CPSNE CPSNE Wb, Wn Compare Wb with Wn, skip if ≠11

(2 or 3) None

25 DAW DAW Wn Wn = decimal adjust Wn 1 1 C

26 DEC DEC f f = f -1 1 1 C,DC,N,OV,Z

DEC f,WREG WREG = f -1 1 1 C,DC,N,OV,Z

DEC Ws,Wd Wd = Ws - 1 1 1 C,DC,N,OV,Z

27 DEC2 DEC2 f f = f -2 1 1 C,DC,N,OV,Z

DEC2 f,WREG WREG = f -2 1 1 C,DC,N,OV,Z

DEC2 Ws,Wd Wd = Ws - 2 1 1 C,DC,N,OV,Z

28 DISI DISI #lit14 Disable Interrupts for k instruction cycles 1 1 None

TABLE 21-2: INSTRUCTION SET OVERVIEW (CONTINUED)

Base

Instr

Assembly

Mnemonic Assembly Syntax Description # of

Words # of

Cycles Status Flags

Affected

dsPIC30F6011/6012/6013/6014

29 DIV DIV.S Wm,Wn Signed 16/16-bit Integer Divide 1 18 N,Z,C,OV

DIV.SD Wm,Wn Signed 32/16-bit Integer Divide 1 18 N,Z,C,OV

DIV.U Wm,Wn Unsigned 16/16-bit Integer Divide 1 18 N,Z,C,OV

DIV.UD Wm,Wn Unsigned 32/16-bit Integer Divide 1 18 N,Z,C,OV

30 DIVF DIVF Wm,Wn Si gned 16/16-bit Fractional Div ide 1 18 N,Z,C,OV

31 DO DO #lit14,Expr Do code to PC+Expr, lit14+1 times 2 2 None

DO Wn,Expr Do code to PC+Expr, (Wn)+1 times 2 2 None

32 ED ED Wm*Wm,Acc,Wx,Wy,Wxd Euclidean Distance (no accumulate) 1 1 OA,OB,OAB,

SA,SB,SAB

33 EDAC EDAC Wm*Wm,Acc,Wx,Wy,Wxd Eu clide an Distance 1 1 OA,OB,OAB,

SA,SB,SAB

34 EXCH EXCH Wns,Wnd Swap Wns with Wnd 1 1 None

35 FBCL FBCL Ws,Wnd Find Bit Change from Left (MSb) Side 1 1 C

36 FF1L FF1L Ws,Wnd Find First One from Left (MSb) Side 1 1 C

37 FF1R FF1R Ws,Wnd Find First One from Right (LSb) Side 1 1 C

38 GOTO GOTO Expr Go to address 2 2 None

GOTO Wn Go to indirect 1 2 None

39 INC INC f f = f + 1 1 1 C,DC,N,OV,Z

INC f,WREG WREG = f + 1 1 1 C,DC,N,OV,Z

INC Ws,Wd Wd = Ws + 1 1 1 C,DC,N,OV,Z

40 INC2 INC2 f f = f + 2 1 1 C,DC,N,OV,Z

INC2 f,WREG WREG = f + 2 1 1 C,DC,N,OV,Z

INC2 Ws,Wd Wd = Ws + 2 1 1 C,DC,N,OV,Z

41 IOR IOR f f = f .IOR. WREG 1 1 N,Z

IOR f,WREG WREG = f .IOR. WREG 1 1 N,Z

IOR #lit10,Wn Wd = lit10 .IOR. Wd 1 1 N,Z

IOR Wb,Ws,Wd Wd = Wb .IOR. Ws 1 1 N,Z

IOR Wb,#lit5,Wd Wd = Wb .IOR. lit5 1 1 N,Z

42 LAC LAC Wso,#Slit4,Acc Load Accumulator 1 1 OA,OB,OAB,

SA,SB,SAB

43 LNK LNK #lit14 Li nk fra me poin ter 1 1 None

44 LSR LSR f f = Logical Right Shift f 1 1 C,N,OV,Z

LSR f,WREG WREG = Logical Right Shift f 1 1 C,N,OV,Z

LSR Ws,Wd Wd = Logical Right Shift Ws 1 1 C,N,OV,Z

LSR Wb,Wns,Wnd Wnd = Logical Right Shift Wb by Wns 1 1 N,Z

LSR Wb,#lit5,Wnd Wnd = Logical Right Shift Wb by lit5 1 1 N,Z

45 MAC MAC Wm*Wn,Acc,Wx,Wxd,Wy,Wyd

AWB

Multiply and Accumulate 1 1 OA,OB,OAB,

SA,SB,SAB

MAC Wm*Wm,Acc,Wx,Wxd,Wy,Wyd Square and Accum ula te 1 1 OA,OB,O AB,

SA,SB,SAB

46 MOV MOV f,Wn Move f to Wn 1 1 None

MOV f Move f to f 1 1 N,Z

MOV f,WREG Move f to WREG 1 1 N,Z

MOV #lit16,Wn Move 16-bit literal to Wn 1 1 None

MOV.b #lit8,Wn Move 8-bit literal to Wn 1 1 None

MOV Wn,f Move Wn to f 1 1 None

MOV Wso,Wdo Move Ws to Wd 1 1 None

MOV WREG,f Move WREG to f 1 1 N,Z

MOV.D Wns,Wd Move Double from W(ns):W(ns+1) to Wd 1 2 None

MOV.D Ws,Wnd Move Double from Ws to W(nd+1):W(nd) 1 2 None

47 MOVSAC MOVSAC Acc,Wx,Wxd,Wy,Wyd,AWB Prefe tch and store accumu lator 1 1 No ne

TABLE 21-2: INSTRUCTION SET OVERVIEW (CONTINUED)

Base

Instr

Assembly

Mnemonic Assembly Syntax Description # of

Words # of

Cycles Status Flag s

Affected

dsPIC30F6011/6012/6013/6014

48 MPY MPY

Wm*Wn,Acc,Wx,Wxd,Wy,Wyd Multiply Wm by Wn to Accumulator 1 1 OA,OB,OAB,

SA,SB,SAB

MPY

Wm*Wm,Acc,Wx,Wxd,Wy,Wyd Square Wm to Accumulator 1 1 OA,OB,OAB,

SA,SB,SAB

49 MPY.N MPY.N

Wm*Wn,Acc,Wx,Wxd,Wy,Wyd -(Multiply Wm by Wn) to Accumulator 1 1 None

50 MSC MSC Wm*Wm,Acc,Wx,Wxd,Wy,Wyd

AWB

Multiply and Subtract fro m Accumu lator 1 1 OA,OB ,O AB,

SA,SB,SAB

51 MUL MUL.SS Wb,Ws,Wnd {Wnd+1, Wnd} = signed(Wb) * signed(Ws) 1 1 None

MUL.SU Wb,Ws,Wnd {Wnd+1, Wnd} = signed(Wb) * unsigned(Ws) 1 1 None

MUL.US Wb,Ws,Wnd {Wnd+1, Wnd} = unsigned(Wb) * signed(Ws) 1 1 None

MUL.UU Wb,Ws,Wnd {Wnd+1, Wnd} = unsigned(Wb) *

unsigned(Ws) 11 None

MUL.SU Wb,#lit5,Wnd {Wnd+1, Wnd} = signed(Wb) * unsigned(lit5) 1 1 None

MUL.UU Wb,#lit5,Wnd {Wnd+1, Wnd} = unsigned(Wb) *

unsigned(lit5) 11 None

MUL f W3:W2 = f * WREG 1 1 None

52 NEG NEG Acc Negate Accum ulato r 1 1 OA,OB,O AB,

SA,SB,SAB

NEG f f = f + 1 1 1 C,DC,N,OV,Z

NEG f,WREG WREG = f + 1 1 1 C,DC,N,OV,Z

NEG Ws,Wd Wd = Ws + 1 1 1 C,DC, N,OV,Z

53 NOP NOP No Operation 1 1 None

NOPR No Operation 1 1 None

54 POP POP f Pop f from top-of-stack (TOS) 1 1 None

POP Wdo Pop from top-of-stack (TOS) to Wdo 1 1 None

POP.D Wnd Pop from top-of-stack (TOS) to

W(nd):W(nd+1) 12 None

POP.S Pop Shadow Registers 1 1 All

55 PUSH PUSH f Push f to top-of-stack (TOS) 1 1 N o ne

PUSH Wso Push Wso to top-of-stack (TOS) 1 1 None

PUSH.D Wns Push W(ns):W(ns+1) to top-of-stack (TOS) 1 2 None

PUSH.S Push Shadow Registe rs 1 1 None

56 PWRSAV PWRSAV #lit1 Go into Sle ep or Idle mode 1 1 WDTO,Sleep

57 RCALL RCALL Expr Relative Call 1 2 None

RCALL Wn Computed Call 1 2 None

58 REPEAT REPEAT #lit14 Repeat Next Instruction lit14+1 times 1 1 None

REPEAT Wn Repeat Next Instruction (Wn)+1 times 1 1 None

59 RESET RESET Software device Reset 1 1 No ne

60 RETFIE RETFIE Return from interrupt 1 3 (2) None

61 RETLW RETLW #lit10,Wn Return with literal in Wn 1 3 (2) None

62 RETURN RETURN Return from S ubroutine 1 3 (2) None

63 RLC RLC f f = Rotate Left through Carry f 1 1 C,N,Z

RLC f,WREG WREG = Rotate Left through Carry f 1 1 C,N,Z

RLC Ws,Wd Wd = Rotate Left through Carry Ws 1 1 C,N,Z

64 RLNC RLNC f f = Rotate Left (No Carry) f 1 1 N,Z

RLNC f,WREG WREG = Rotate Left (No Carry) f 1 1 N,Z

RLNC Ws,Wd Wd = Rotate Left (No Carry) Ws 1 1 N,Z

65 RRC RRC f f = Rotate Right through Carry f 1 1 C,N,Z

RRC f,WREG WREG = Rotate Right through Carry f 1 1 C,N,Z

RRC Ws,Wd Wd = Rotate Right through Carry Ws 1 1 C,N,Z

TABLE 21-2: INSTRUCTION SET OVERVIEW (CONTINUED)

Base

Instr

Assembly

Mnemonic Assembly Syntax Description # of

Words # of

Cycles Status Flags

Affected

dsPIC30F6011/6012/6013/6014

66 RRNC RRNC f f = Rotate Right (No Carry) f 1 1 N,Z

RRNC f,WREG WREG = Rotate Right (No Carry) f 1 1 N,Z

RRNC Ws,Wd Wd = Rotate Right (No Carry) Ws 1 1 N,Z

67 SAC SAC Acc,#Slit4,Wdo Store Accumulator 1 1 None

SAC.R Acc,#Slit4,Wdo Store Rounded Accumulator 1 1 None

68 SE SE Ws,Wnd Wnd = sign-extended Ws 1 1 C,N,Z

69 SETM SETM f f = 0xFFFF 1 1 None

SETM WREG WREG = 0xFFFF 1 1 None

SETM Ws Ws = 0xFFFF 1 1 None

70 SFTAC SFTAC Acc,Wn Arithmetic Shift Accumulator by (Wn) 1 1 OA,OB,OAB,

SA,SB,SAB

SFTAC Acc,#Slit6 Arithmetic Shift Accumulator by Slit6 1 1 OA,OB,OAB,

SA,SB,SAB

71 SL SL f f = Left Shift f 1 1 C,N,OV,Z

SL f,WREG WREG = Left Shift f 1 1 C,N,OV,Z

SL Ws,Wd Wd = Left Shift Ws 1 1 C,N,OV,Z

SL Wb,Wns,Wnd Wnd = Left Shift Wb by Wns 1 1 N,Z

SL Wb,#lit5,Wnd Wnd = Left Shift Wb by lit5 1 1 N,Z

72 SUB SUB Acc Subtract Accum ulat ors 1 1 OA,OB ,O AB,

SA,SB,SAB

SUB f f = f - WREG 1 1 C,DC,N,OV,Z

SUB f,WREG WREG = f - WREG 1 1 C,DC,N,OV,Z

SUB #lit10,Wn Wn = Wn - lit10 1 1 C,DC,N,OV,Z

SUB Wb,Ws,Wd Wd = Wb - Ws 1 1 C,DC,N,OV,Z

SUB Wb,#lit5,Wd Wd = Wb - lit5 1 1 C,DC,N,OV,Z

73 SUBB SUBB f f = f - WREG - (C) 1 1 C,DC,N,OV,Z

SUBB f,WREG WREG = f - WREG - (C) 1 1 C,DC,N,OV,Z

SUBB #lit10,Wn Wn = Wn - lit10 - (C) 1 1 C,DC,N,OV,Z

SUBB Wb,Ws,Wd Wd = Wb - Ws - (C) 1 1 C,DC,N,OV,Z

SUBB Wb,#lit5,Wd Wd = Wb - lit5 - (C) 1 1 C,DC,N,OV,Z

74 SUBR SUBR f f = WREG - f 1 1 C,DC,N,OV,Z

SUBR f,WREG WREG = WREG - f 1 1 C,DC,N,OV,Z

SUBR Wb,Ws,Wd Wd = Ws - Wb 1 1 C,DC,N,OV,Z

SUBR Wb,#lit5,Wd Wd = lit5 - Wb 1 1 C,DC,N,OV,Z

75 SUBBR SUBBR f f = WREG - f - (C) 1 1 C,DC,N,OV,Z

SUBBR f,WREG WREG = WREG -f - (C) 1 1 C,DC,N,OV,Z

SUBBR Wb,Ws,Wd Wd = Ws - Wb - (C) 1 1 C,DC,N,OV,Z

SUBBR Wb,#lit5,Wd Wd = lit5 - Wb - (C) 1 1 C,DC,N,OV,Z

76 SWAP SWAP.b Wn Wn = nibble swap Wn 1 1 None

SWAP Wn Wn = byte swap Wn 1 1 None

77 TBLRDH TBLRDH Ws,Wd Read Prog<23:16> to Wd<7:0> 1 2 None

78 TBLRDL TBLRDL Ws,Wd Read Prog<15:0> to Wd 1 2 None

79 TBLWTH TBLWTH Ws,Wd Write Ws<7:0 > to Prog <23:16> 1 2 Non e

80 TBLWTL TBLWTL Ws,Wd Write Ws to Prog<15:0> 1 2 Non e

81 ULNK ULNK Unlink fra me poi n ter 1 1 None

82 XOR XOR f f = f .XOR. WREG 1 1 N,Z

XOR f,WREG WREG = f .XOR. WREG 1 1 N,Z

XOR #lit10,Wn Wd = lit10 .XOR. Wd 1 1 N,Z

XOR Wb,Ws,Wd Wd = Wb .XOR. Ws 1 1 N,Z

XOR Wb,#lit5,Wd Wd = Wb .XOR. lit5 1 1 N,Z

83 ZE ZE Ws,Wnd Wnd = Zero-extend Ws 1 1 C,Z,N

TABLE 21-2: INSTRUCTION SET OVERVIEW (CONTINUED)

Base

Instr

Assembly

Mnemonic Assembly Syntax Description # of

Words # of

Cycles Status Flag s

Affected

dsPIC30F6011/6012/6013/6014

22.0 DEVELOPMENT SUPPORT

The PIC® microcontrollers are supported with a full

range of hardware and software development tools:

• Integrated Development Environment

- MPLAB® IDE Software

• Assemblers/Compilers/Linkers

- MPASMTM Assembler

- MPLAB C18 and MPLAB C30 C Compilers

-MPLINK

TM Object Linker/

MPLIBTM Object Librarian

- MPLAB ASM30 Assembler/Linker/Library

• Simulators

- MPLAB SIM Software Simulator

•Emulators

- MPLAB ICE 2000 In-Circuit Emulator

- MPLAB REAL ICE™ In-Circuit Emulator

• In-Circuit Debugger

- MPLAB ICD 2

• Device Progra mmers

- PICSTART® Plus Development Programmer

- MPLAB PM3 Device Programmer

- PICkit™ 2 Development Programmer

• Low-Cost Demonstration and Development

Boards and Evaluation Kits

22.1 MPLAB Integrated Development

Environment Software

The MPLAB IDE software brings an ease of software

development previously unseen in the 8/16-bit micro-

controller market. The MPLAB IDE is a Windows®

operating system-based application that contains:

• A single graphical interface to all debugging tools

- Simulator

- Programmer (sold separately)

- Emulator (sold separatel y)

- In-Circuit Deb ugger (sold separately)

• A full-featured editor with color-coded context

• A multiple project manager

• Customizable data windows with direct edit of

contents

• High-level source code debugging

• Visual device initializer for easy register

initialization

• Mouse over variable inspection

• Drag and drop variables from source to watch

windows

• Exten si ve on-l in e help

• Integration of select third party tools, such as

HI-TECH Software C Compilers and IAR

C Compilers

The MPLAB IDE allows you to:

• Edit your source files (eithe r assembly or C)

• One touch assemble (or compile) and download

to PIC MCU emulator and simulator tools

(automatically updates all project information)

• Debug us ing :

- Source files (assemb ly or C)

- Mixed assembly and C

- Machine code

MPLAB IDE supports multiple debugging tools in a

single development paradigm, from the cost-effective

simulators, through low-cost in-circuit debuggers, to

full-featured emulators. This eliminates the learning

curve when upgrading to tools with increased flexibility

and power.

dsPIC30F6011/6012/6013/6014

22.2 MPASM Assembler

The MPASM Assembler is a full-featured, universal

macro assemb ler for all PIC MCUs.

The MPASM Assembler generates relocatable object

files fo r the MPLINK Ob ject Linker , Int el® standa rd HEX

files, MAP files to detail memory usage and symbol

reference, absolute LST files that contain source lines

and generated machine code and COFF files for

debugging.

The MPASM Assembler features include:

• Integration into MPLAB IDE projects

• User-defined macros to streamline

assembly code

• Conditional assembly for multi-purpose

sour ce fil es

• Directives that allow complete control over the

assembly process

22.3 MPLAB C18 and MPLAB C30

C Compilers

The MPLAB C18 and MPLAB C30 Code Development

Systems are complete ANSI C compilers for

Microchip’s PIC18 family of microcontrollers and the

dsPIC30, dsPIC33 and PIC24 family of digital signal

controllers. These compilers provide powerful integra-

tion capabilities, superior code optimization and ease

of use not found with other compilers.

For easy source level debugging, the compilers provide

symbol info rmation tha t is optimized to the MPLAB IDE

debugger.

22.4 MPLINK Object Linker/

MPLIB Object Librari an

The MPLINK Object Linker combines relocatable

objects created by the MPASM Assembler and the

MPLAB C18 C Compiler. It can link relocatable objects

from precompiled libraries, using directives from a

linker script.

The MPLIB O bject Li brarian manag es the cre ation an d

modification of library files of precompiled code. When

a routine from a library is called from a source file , only

the modules that contain that routine will be linked in

with the application. This allows large libraries to be

used efficiently in many different applications.

The object linker/library features include:

• Efficient linking of single libraries instead of many

smaller files

• Enhanced code maintainability by grouping

related modules together

• Flexible creation of libraries with easy module

listing, replacement, de letion and extraction

22.5 MPLAB ASM30 Assembler, Linker

and Librarian

MPLAB ASM30 Assembler produces relocatable

machine code from symbolic assembly language for

dsPIC30F devices. MPLAB C30 C Compiler uses the

assembler to produce its object file. The assembler

generates relocatable object files that can then be

archived or linke d with other relocatable ob ject files and

arch ives to c rea te an e xecu tabl e fil e. N otabl e fe atu res

of the assembler include:

• Support for the entire dsPIC30F instruction set

• Support for fixed-point and floating-point data

• Command line interface

• Rich dire cti ve set

• Flexible macro language

• MPLAB IDE compatibility

22.6 MPLAB SIM Software Simulator

The MPLAB SIM Software Simulator allows code

development in a PC-hosted environment by simulat-

ing the PIC MCUs and dsPIC® DSCs on an instruction

level. On any given instruction, the data areas can be

examined or modified and stimuli can be applied from

a comprehensive stimulus controller. Registers can be

logged to files for further run-time analysis. The trace

buffer and logic analyzer display extend the power of

the simulator to record and track program execution,

actions on I/O, most periph erals and inte rnal regi sters.

The MPLAB SIM Software Simulator fully supports

symbolic debugging using the MPLAB C18 and

MPLAB C30 C Compilers, and the MPASM and

MPLAB ASM30 Assemblers. The software simulator

offers the flexibility to develop and debug code outside

of the hardware laboratory environment, making it an

excellent, economical software development tool.

dsPIC30F6011/6012/6013/6014

22.7 MPLAB ICE 2000

High-Performance

In-Circui t Emu lator

The MPLAB ICE 2000 In-Circuit Emulator is intended

to provide the product development engineer with a

complete microcontroller design tool set for PIC

microcontrollers. Software control of the MPLAB ICE

2000 In-Circuit Emulator is advanced by the MPLAB

Integrated Development Environment, which allows

editing, building, downloading and source debugging

from a single environment.

The MPLAB ICE 2000 is a full-featured emulator

system with enhanced trace, trigger and data monitor-

ing feat ures. Interc hangeabl e proces sor modul es allow

the system to be easily reconfigured for emulation of

different processors. The architecture of the MPLAB

ICE 2000 In-Circuit Emulator allows expansion to

support new PIC microcontrollers.

The MPLAB ICE 2000 In-Circuit Emulator system has

been designed as a real-time emulation system with

advanced features that are typically found on more

expensive development tools. The PC platform and

Microsoft® Windows® 32-bit operating system were

chosen to best make these features available in a

simple, unified application.

22.8 MPLAB REAL ICE In-Circuit

Emulator System

MPLAB REAL ICE In-Circuit Emulator System is

Microchip’s next generation high-speed emulator for

Microchip Flash D SC® and MCU devic es. It debugs and

programs PIC® and dsPIC® Flash microcontrollers with

the easy-to-use, powerful graphical user interface of the

MPLAB Integrated Development Environment (IDE),

included with each kit.

The MPLAB REAL ICE pro be is connected to the design

engineer’s PC using a high-speed USB 2.0 interface and

is connected to the target with either a connector

compatible with the popular MPLAB ICD 2 system

(RJ11) or with the new high speed, noise tolerant, low-

voltage differential signal (LVDS) interconnection

(CAT5).

MPLAB REAL ICE is field upgradeable through future

firmware downloads in MPLAB IDE. In upcoming

releases of MPLAB ID E, new devic es w ill be supported,

and new features will be add ed, such as software break-

points and assembly code trace. MPLAB REAL ICE

offers significant advantages over competitive emulators

including low-cost, full-speed emulation, real-time

variable watches, trace analysis, complex breakpoints, a

ruggedized probe interface and long (up to three meters)

interconnection cables .

22.9 MPLAB ICD 2 In-Circuit Debugger

Microchip’s In-Circuit Debugger, MPLAB ICD 2, is a

powerful, low-cost, run-time development tool,

connecting to the host PC via an RS-232 or high-speed

USB interface. This tool is based on the Flash PIC

MCUs and can be used to develop for these and other

PIC MCUs and dsPIC DSCs. The MPLAB ICD 2 utilizes

the in-circuit debugging capability built into the Flash

devices. This feature, along with Microchip’s In-Circuit

Serial ProgrammingTM (ICSPTM) protocol, offers cost-

effective, in-circuit Flash debugging from the graphical

user interface of the MPLAB Integrated Development

Environment. This enables a designer to develop and

debug sou rce code by s etting bre akpoi nts , singl e step-

ping and watching variables, and CPU status and

peripheral registers. Running at full speed enables

testing hardware and applications in real time. MPLAB

ICD 2 also serves as a development programmer for

selected PIC devices.

22.10 MPLAB PM3 Device Programmer

The MPLAB PM3 Device Programmer is a universal,

CE compliant device programmer with programmable

voltage verification at VDDMIN and VDDMAX for

maximum reliability. It features a large LCD display

(128 x 64 ) for men us an d error m essages and a m odu-

lar, detachable socket assembly to support various

pack age types. The ICSP™ cable assembly is incl uded

as a standard item. In Stand-Alone mode, the MPLAB

PM3 Devic e Programmer ca n read, verif y and program

PIC devices without a PC connection. It can also set

code protection in this mode. The MPLAB PM3

connects to the host PC via an RS-232 or USB cable.

The MPLAB PM3 h as high-spe ed co mmunicat ions and

optimized algorithms for quick programming of large

memory devices and in corporates an SD/MMC card for

file storage and secure data applications.

dsPIC30F6011/6012/6013/6014

22.11 PICSTART Plus Development

Programmer

The PICSTART Plus Development Programmer is an

easy-to-use, low-cost, prototype programmer. It

connects to the PC via a COM (RS-232) port. MPLAB

Inte grated Dev elopmen t En vironme nt so ftware makes

using the programmer simple and efficient. The

PICSTART Plus Development Programmer supports

most PIC devices in DIP packages up to 40 pins.

Larger pin count devices, such as the PIC16C92X and

PIC17C76 X, may be sup ported with an a dapter socket.

The PICSTART Plus Development Programmer is CE

compliant.

22.12 PICkit 2 Development Programmer

The PICkit™ 2 Development Programmer is a low-cost

programmer and selected Flash device debugger with

an easy-to-use interface for programming many of

Microchip’s baseline, mid-range and PIC18F families of

Flash m emory microcontrol lers. The PICkit 2 S tarter Kit

includes a prototyping development board, twelve

sequential lessons, software and HI-TECH’s PICC™

Lite C compiler , and is desig ned to hel p get up to s peed

quickly using PIC® microcontrollers. The kit provides

everything needed to program, evaluate and develop

applications using Microchip’s powerful, mid-range

Flash memory family of microcontrollers.

22.13 Demonstration, Development and

Evaluation Boards

A wide variety of demonstration, development and

evaluation boards for various PIC MCUs and dsPIC

DSCs allows quick application development on fully func-

tional systems. Most boards includ e prototyping areas for

adding custom circuitry and provide application firmware

and source code for examination and modification.

The board s suppo rt a variety of features, including LEDs,

temperature sensors, switches, speakers, RS-232

interfaces, LCD displays, potentiometers and additional

EEPROM memory .

The demonstration and development boards can be

used in teaching environments, for prototyping custom

circuits and for learning about various microcontroller

applications.

In addition to the PICDEM™ and dsPICDEM™ demon-

stration/development board series of circuits, Microchip

has a line of evaluation kits and demonstration software

for analog filter design, KEELOQ® security ICs, CAN,

IrDA®, PowerSmart® battery management, SEEVAL®

evaluation system, Sigma-Delta ADC, flow rate

sensing, plus many more.

Check the Microchip web page (www.microchip.com)

and the latest “Product Selector Guide” (DS00148) for

the complete list of demonstration, development and

evaluation kits.

dsPIC30F6011/6012/6013/6014

23.0 ELECTRICAL CHARACTERISTICS

This section provides an overview of dsPIC30F electrical character istics. Additional information will be provided in future

revisions of this document as it becomes available.

For detailed information about the dsPIC30F architecture and core, refer to “dsPIC30F Family Reference Manual”

(DS70046).

Absolute maximum ratings for the dsPIC30F family are listed below. Exposure to these maximum rating conditions for

extende d peri ods may aff ec t devi ce re liabil ity. Func tional opera tio n of t he de vice at th ese o r a ny ot her co nditio ns ab ove

the parameters indicated in the operation listings of this specification is not implied.

Absolute Maximum Ratings(†)

Ambient temperature under bias.............................................................................................................-40°C to +125°C

Storage temperature.............................................................................................................................. -65°C to +150°C

Voltage on any pin with respect to VSS (except VDD and MCLR) (Note 1).....................................-0.3V to (VDD + 0.3V)

Vo lt a ge on VDD with respect to VSS ......................................................................................................... -0.3V to +5.5V

Vo lt a ge on MCLR with respect to VSS .......................................................................................................0V to +13.25V

Maximum curr ent o ut of VSS pin ...........................................................................................................................300 mA

Maximum curr ent i nto VDD pin (Note 2)................................................................................................................250 mA

Input clamp current, IIK (VI < 0 or VI > VDD)..........................................................................................................±20 mA

Output clamp current, IOK (VO < 0 or VO > VDD)...................................................................................................±20 mA

Maximum output current sunk by any I/O pin..........................................................................................................25 mA

Maximum output current sourced by any I/O pin....................................................................................................25 mA

Maximum current sunk by all ports.......................................................................................................................200 mA

Maximum current sourced by all ports (N ote 2)....................................................................................................200 mA

Note 1: Volta ge sp ik es bel ow VSS at the MCLR/VPP pin, inducing currents greater than 80 mA, may cause latchup.

Thus, a se ries res is tor of 5 0-10 0Ω sho uld be us ed when applyin g a “lo w” lev el to the MCLR/VPP pi n, rat her

than pulling this pin directly to VSS.

2: Maximum allowable current is a function of device maximum power dissipation. See Table 23-2 for PDMAX.

23.1 DC Characteristics

†NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device . This is a stres s rating onl y and funct ional ope ration of the device at tho se or any other co nditio ns above those

indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

Note: All peripheral electrical characteristics are specified. For exact peripherals available on specific

devices, please refer the Fam ily Cross Reference Table.

TABLE 23-1: OPERATING MIPS VS. VOLTAGE

VDD Range Temp Range Max MIPS

dsPIC30F601X-30I dsPIC30F601X-20I dsPIC30F601X-20E

4.75-5.5V -40°C to 85°C 30 20 —

4.75-5.5V -40°C to 125°C — — 20

3.0-3.6V -40°C to 85°C 15 10 —

3.0-3.6V -40°C to 125°C — — 10

2.5-3.0V -40°C to 85°C 7.5 7.5 —

dsPIC30F6011/6012/6013/6014

TABLE 23-2: THERMAL OPERATING CONDITIONS

Rating Symbol Min Typ Max Unit

dsPIC30F601x-30I

Operating Junction Temperature Range TJ-40 +125 °C

Operating Ambient Temperature Range TA-40 +85 °C

dsPIC30F601x-20I

Operati ng Junction Temperature Ra ng e TJ-40 +150 °C

Operating Ambient Temperature Range TA-40 +85 °C

dsPIC30F601x-20E

Operati ng Junction Temperature Ra ng e TJ-40 +150 °C

Operating Ambient Temperature Range TA-40 +125 °C

Power Dissipation:

Internal ch ip pow er dis sip ation:

PDPINT + PI/OW

I/O Pin power dissipation:

Maximum Allowed Power Dissipation PDMAX (TJ - TA) / θJA W

TABLE 23-3: THERMAL PACKAGING CHARACTERISTICS

Characteristic Symbol Typ Max Unit Notes

Package Thermal Resistance, 80-pin TQFP (14x14x1 mm) θJA 50 °C/W 1

Package Thermal Resistance, 64-pin TQFP (14x14x1 mm) θJA 50 °C/W 1

Note 1: Junction to ambient thermal resistance, Theta-ja (θJA) numbers are achieved by package simulations.

TABLE 23-4: DC TEMPERATURE AND VOLTAGE SPECIFICATIONS

DC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industri al

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Typ(1) Max Units Conditions

Operating Voltage(2)

DC10 VDD Supply Voltage 2.5 — 5.5 V Industrial tem pera ture

DC11 VDD Supply Voltage 3.0 — 5.5 V Extended temperature

DC12 VDR RAM Data Retention Voltage(3) —1.5—V

DC16 VPOR VDD Start Voltage

to ensure internal

Power-on Rese t signal

—VSS —V

DC17 SVDD VDD Rise Rate

to ensure internal

Power-on Rese t signal

0.05 V/ms 0-5V in 0.1 sec

0-3V in 60 ms

Note 1: Data in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

2: These parameters are characterized but not tested in manufacturing.

3: This is the limit to which VDD can be lowered without losing RAM data.

PINT VDD IDD IOH

∑

–()×=

I/OVDD VOH

–{}IOH

×()

∑VOL IOL

×()

∑

dsPIC30F6011/6012/6013/6014

TABLE 23-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)

DC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Exten ded

Parameter

No. Typical(1) Max Units Conditions

Operating Current (IDD)(2)

DC31a 6.8 10 mA 25°C 3.3V 0.128 MIPS

LPRC (512 kHz)

DC31b 6.3 10 mA 85°C

DC31c 6.1 10 mA 125°C

DC31e 16 22 mA 25°C 5VDC31f 15 22 mA 85°C

DC31g 15 22 mA 125°C

DC30a 13 19 mA 25°C 3.3V (1.8 MIPS)

FRC (7.37 MHz)

DC30b 13 19 mA 85°C

DC30c 13 19 mA 125°C

DC30e 27 39 mA 25°C 5VDC30f 26 39 mA 85°C

DC30g 25 39 mA 125°C

DC23a 27 41 mA 25°C 3.3V

4 MIPS

DC23b 27 41 mA 85°C

DC23c 27 41 mA 125°C

DC23e 41 60 mA 25°C 5VDC23f 40 60 mA 85°C

DC23g 40 60 mA 125°C

DC24a 46 71 mA 25°C 3.3V

10 MIPS

DC24b 46 71 mA 85°C

DC24c 47 71 mA 125°C

DC24e 79 120 mA 25°C 5VDC24f 78 120 mA 85°C

DC24g 78 120 mA 125°C

DC27a 83 120 mA 25°C 3.3V

20 MIPS

DC27b 83 120 mA 85°C

DC27d 138 190 mA 25°C 5VDC27e 137 190 mA 85°C

DC27f 136 190 mA 125°C

DC29a 194 255 mA 25°C 5V 30 MIPS

DC29b 192 255 mA 85°C

Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only

and are not tested.

2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O

pin loading and switching rate, oscillator type, internal code execution pattern and temperature also have

an imp act on the current c onsumpti on. The tes t condi tions fo r all IDD measur ement s are as follow s: OSC1

driven with external square wave from rail to rail. All I/O pins are configured as Inputs and pulled to VDD.

MCLR = VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, Program Memory and Data

Memory are oper ational . N o peripheral modules are operat ing.

dsPIC30F6011/6012/6013/6014

TABLE 23-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)

DC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5. 5V

(unless otherwise stated)

Operating temp erature - 40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Exten ded

Parameter

No. Typical(1) Max Units Conditions

Operating Current (IIDLE)(2)

DC51a 6.3 9 mA 25°C 3.3V

0.128 MIPS

LPRC (512 kHz)

DC51b 5.9 9 mA 85°C

DC51c 5.7 9 mA 125°C

DC51e 16 21 mA 25°C 5VDC51f 15 21 mA 85°C

DC51g 15 21 mA 125°C

DC50a 10 15 mA 25°C 3.3V

(1.8 MIPS)

FRC (7.37 MHz)

DC50b 10 15 mA 85°C

DC50c 10 15 mA 125°C

DC50e 21 30 mA 25°C 5VDC50f 20 30 mA 85°C

DC50g 19 30 mA 125°C

DC43a 15 23 mA 25°C 3.3V

4 MIPS

DC43b 15 23 mA 85°C

DC43c 15 23 mA 125°C

DC43e 30 45 mA 25°C 5VDC43f 29 45 mA 85°C

DC43g 29 45 mA 125°C

DC44a 28 42 mA 25°C 3.3V

10 MIPS

DC44b 28 42 mA 85°C

DC44c 28 42 mA 125°C

DC44e 50 70 mA 25°C 5VDC44f 49 70 mA 85°C

DC44g 49 70 mA 125°C

DC47a 49 70 mA 25°C 3.3V

20 MIPS

DC47b 50 70 mA 85°C

DC47d 84 110 mA 25°C 5VDC47e 84 110 mA 85°C

DC47f 83 110 mA 125°C

DC49a 117 145 mA 25°C 5V 30 MIPS

DC49b 117 145 mA 85°C

Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only

and are not tested.

2: Base IIDLE current is measured with Core off, Clock on and all modules turned off.

dsPIC30F6011/6012/6013/6014

TABLE 23-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)

DC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operati ng tem pera ture -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Parameter

No. Typical(1) Max Units Conditions

Power Down Current (IPD)

DC60a 0.3 — μA 25°C 3.3V

Base Power Down Current(2)

DC60b 2 60 μA 85°C

DC60c 23 120 μA 125°C

DC60e 0.5 — μA 25°C 5VDC60f 3 110 μA 85°C

DC60g 32 180 μA 125°C

DC61a 10 20 μA 25°C 3.3V

Watchdog Timer Current: ΔIWDT(3)

DC61b 10 20 μA 85°C

DC61c 10 20 μA 125°C

DC61e 18 30 μA 25°C 5VDC61f 17 30 μA 85°C

DC61g 17 30 μA 125°C

DC62a 4 10 μA 25°C 3.3V

T imer 1 w/32 kHz Crystal: ΔITI32(3)

DC62b 5 10 μA 85°C

DC62c 4 10 μA 125°C

DC62e 4 15 μA 25°C 5VDC62f 6 15 μA 85°C

DC62g 5 15 μA 125°C

DC63a 30 55 μA 25°C 3.3V

BOR On: ΔIBOR(3)

DC63b 32 55 μA 85°C

DC63c 34 55 μA 125°C

DC63e 34 60 μA 25°C 5VDC63f 37 60 μA 85°C

DC63g 38 60 μA 125°C

DC66a 18 35 μA 25°C 3.3V

Low-Voltage Detect: ΔILVD(3)

DC66b 20 35 μA 85°C

DC66c 21 35 μA 125°C

DC66e 22 40 μA 25°C 5VDC66f 23 40 μA 85°C

DC66g 24 40 μA 125°C

Note 1: Data in the Typical column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance

only and are not tested.

2: Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and

pulled high. LVD, BOR, WDT, etc. are all switch ed off.

3: The Δ current is the additional current consumed when the module is enabled. This current should be

added to the base IPD current.

dsPIC30F6011/6012/6013/6014

TABLE 23-8: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS

DC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125° C for Extende d

Param

No. Symbol Characteristic Min Typ(1) Max Units Conditions

VIL Input Low Voltage(2)

DI10 I/O pins:

with Schmitt Trigger buffer VSS —0.2VDD V

DI15 MCLR VSS —0.2VDD V

DI16 OSC1 (in XT, HS and LP modes) VSS —0.2VDD V

DI17 OSC1 (in RC mode)(3) VSS —0.3VDD V

DI18 SDA, SCL VSS —0.3VDD V SMbus disabled

DI19 SDA, SCL VSS —0.2VDD V SMbus enabled

VIH Input High Voltage(2)

DI20 I/O pins:

with Schmitt Trigger buffer 0.8 VDD —VDD V

DI25 MCLR 0.8 VDD —VDD V

DI26 OSC1 (in XT, HS and LP modes) 0.7 VDD —VDD V

DI27 OSC1 (in RC mode)(3) 0.9 VDD —VDD V

DI28 SDA, SCL 0.7 VDD —VDD V SMbus disabled

DI29 SDA, SCL 0.8 VDD —VDD V SMbus enabled

ICNPU CNXX Pull-up Current(2)

DI30 50 250 400 μAVDD = 5V, VPIN = VSS

IIL Input Leakage Current(2)(4)(5)

DI50 I/O ports — 0.01 ±1 μAVSS ≤ VPIN ≤ VDD,

Pin at high-impedance

DI51 Analog input pins — 0.50 — μAV

SS ≤ VPIN ≤ VDD,

Pin at high-impedance

DI55 MCLR —0.05±5μAVSS ≤ VPIN ≤ VDD

DI56 OSC1 — 0.05 ±5 μAVSS ≤ VPIN ≤ VDD, XT, HS

and LP Osc mode

Note 1: Data in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

2: These parameters are characterized but not tested in manufacturing.

3: In RC oscillator configuration, the OSC1/CLKl pin is a Schmitt Trigger input. It is not recommended that

the dsPIC30F device be driven with an external clock while in RC mode.

4: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input

voltages.

5: Negative current is defined as current sourced by the pin.

dsPIC30F6011/6012/6013/6014

FIGURE 23-1: LOW-VOLTAGE DETECT CHARACTERISTICS

TABLE 23-9: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS

DC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industri al

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Typ(1) Max Units Conditions

VOL Output Low Voltage(2)

DO10 I/O ports — — 0.6 V IOL = 8.5 mA, VDD = 5V

——TBDVIOL = 2.0 mA, VDD = 3V

DO16 OSC2/CLKO — — 0.6 V IOL = 1.6 mA, VDD = 5V

(RC or EC Osc mode) — — TBD V IOL = 2.0 mA, VDD = 3V

VOH Output High Voltage(2)

DO20 I/O ports VDD – 0.7 — — V IOH = -3.0 mA, VDD = 5V

TBD — — V IOH = -2.0 mA, VDD = 3V

DO26 OSC2/CLKO VDD – 0.7 — — V IOH = -1.3 mA, VDD = 5V

(RC or EC Osc mode) TBD — — V IOH = -2.0 mA, VDD = 3V

Capacitive Loading Specs

on Output Pins(2)

DO50 COSC2 OSC2/SOSC2 pin — — 15 pF In XTL, XT, HS and LP mode s

when e xternal cloc k is used to

drive OSC1.

DO56 CIO All I/O pins and OSC2 — — 50 pF RC or EC Osc mode

DO58 CBSCL, SDA — — 400 pF In I2C mode

Note 1: Data in “Typ” colum n i s at 5V, 25°C unless o the rwis e s tated. Param ete rs ar e for design gu ida nc e on ly and

are not tested.

2: These parameters are characterized but not tested in manufacturing.

LV10

LVDIF

VDD

(LVDIF set by hardware)

dsPIC30F6011/6012/6013/6014

FIGURE 23-2: BROWN-OUT RESET CHARACTERISTICS

TABLE 23-10: ELECTRICAL CHARACTERISTICS: LVDL

DC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ Max Units Conditions

LV10 VPLVD L VDL V oltage on VDD transition

high to low LVDL = 0000(2) ———V

LVDL = 0001(2) ———V

LVDL = 0010(2) ———V

LVDL = 0011(2) ———V

LVDL = 0100 2.50 — 2.65 V

LVDL = 0101 2.70 — 2.86 V

LVDL = 0110 2.80 — 2.97 V

LVDL = 0111 3.00 — 3.18 V

LVDL = 1000 3.30 — 3.50 V

LVDL = 1001 3.50 — 3.71 V

LVDL = 1010 3.60 — 3.82 V

LVDL = 1011 3.80 — 4.03 V

LVDL = 1100 4.00 — 4.24 V

LVDL = 1101 4.20 — 4.45 V

LVDL = 1110 4.50 — 4.77 V

LV15 VLVDIN External LVD input pin

threshold voltage LVDL = 1111 ———V

Note 1: These parameters are characterized but not tested in manufacturing.

2: These values not in usable operating range.

BO10

Reset (due to BOR)

VDD

(Device in Brown-out Reset)

(Device not in Brown-out Reset)

Power Up T ime-out

BO15

dsPIC30F6011/6012/6013/6014

TABLE 23-12: DC CHARACTERISTICS: PROGRAM AND EEPROM

TABLE 23-11: ELECTRICAL CHARACTERISTICS: BOR

DC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operati ng tem per ature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Typ(1) Max Units Conditions

BO10 VBOR BOR Voltage(2) on

VDD transition high to

low

BORV = 11(3) — — — V Not in operating

range

BORV = 10 2.6 — 2.71 V

BORV = 01 4.1 — 4.4 V

BORV = 00 4.58 — 4.73 V

BO15 VBHYS —5—mV

Note 1: Data in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

2: These parameters are characterized but not tested in manufacturing.

3: ‘11’ values not in usable operating range.

DC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industri al

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Typ(1) Max Units Conditions

Data EEPROM Memory (2)

D120 EDByte Endurance 100K 1M — E/W -40°C ≤ TA ≤ +85°C

D121 VDRW VDD for Read/Write VMIN — 5.5 V Using EECON to read/write

VMIN = Minimum operating

voltage

D122 TDEW Erase/Write Cycle Time — 2 — ms

D123 TRETD Characteris tic Retention 40 100 — Year Provided no other specificatio ns

are violated

D124 IDEW IDD During Programming — 10 30 mA Row Erase

Program FLASH Memory (2)

D130 EPCell Endurance 10K 100K — E/W -40°C ≤ TA ≤ +85°C

D131 VPR VDD for Read VMIN —5.5VVMIN = Minimum operating

voltage

D132 VEB VDD for Bulk Erase 4.5 — 5.5 V

D133 VPEW VDD for Erase/Write 3.0 — 5.5 V

D134 TPEW Erase/Write Cycle Time — 2 — ms

D135 TRETD Characteris tic Retention 40 100 — Year Provided no other specificatio ns

are violated

D136 TEB ICSP Block Erase Time — 4 — ms

D137 IPEW IDD During Programming — 10 30 mA Row Erase

D138 IEB IDD During Programming — 10 30 mA Bulk Erase

Note 1: Data in “Typ” column is at 5V, 25°C unless otherwise stated.

2: These parameters are characterized but not tested in manufacturing.

dsPIC30F6011/6012/6013/6014

23.2 AC Characteristics and Timing Parameters

The information contained in this section defines dsPIC30F AC characteristics and timing parameters.

FIGURE 23-3: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS

FIGURE 23-4: EXTERNAL CLOCK TIMING

TABLE 23-13: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operati ng tem pera ture -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Operati ng voltage VDD range as described in DC Spec Section 23.0

“Electri cal Characteristics”.

VDD/2

VSS

RL= 464Ω

CL= 50 pF for all pins except OSC2

5 pF for OSC2 output

Load Cond itio n 1 – for all pins except OSC2 Load Condition 2 – for OSC2

OSC1

CLKO

Q4 Q1 Q2 Q3 Q4 Q1

OS20

OS25

OS30 OS30

OS40 OS41

OS31 OS31

dsPIC30F6011/6012/6013/6014

TABLE 23-14: EXTERNAL CLOCK TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industri al

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Typ(1) Max Units Conditions

OS10 FOSC External CLKI Frequency(2)

(External clocks allowed only

in EC mode)

—

7.5

MHz

EC with 4x PLL

EC with 8x PLL

EC with 16x PLL

Oscillator Frequency(2) DC

0.4

—

7.37

512

7.5

—

MHz

kHz

MHz

kHz

XTL

XT with 4x PLL

XT with 8x PLL

XT with 16x PLL

FRC internal

LPRC internal

OS20 TOSC TOSC = 1/FOSC — — — — See parameter OS10

for FOSC value

OS25 TCY Instruction Cycle Time(2)(3) 33 — DC ns See Table 23-17

OS30 TosL,

TosH External Clock(2) in (OSC1)

High or Low Time .45 x

TOSC ——nsEC

OS31 TosR,

TosF External Clock(2) in (OSC1)

Rise or Fall Time ——20nsEC

OS40 TckR CLKO Rise Time(2)(4) —610ns

OS41 TckF CLKO Fall Time(2)(4) —610ns

Note 1: Data in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

2: These parameters are characterized but not tested in manufacturing.

3: Instruction cycle period (TCY) equals four times the input oscillator time base period. All specified values

are based on characterization data for that particular oscillator type under standard operating conditions

with the device executing code. Exceeding these specified limits may result in an unstable oscillator

operation and/or higher than expected current consumption. All devices are tested to operate at “Min.”

values with an external clock applied to the OSC1/CLKI pin. When an external clock input is used, the

“Max.” cycle time limit is “DC” (no clock) for all devices.

4: Measure ments are ta ken in EC or ERC m ode s. Th e CLKO s ig nal is meas ured on the OSC 2 pi n. CLKO is

low for the Q1-Q2 period (1/2 TCY) and high for the Q3-Q4 period (1/2 TCY).

dsPIC30F6011/6012/6013/6014

TABLE 23-15: PLL CLOCK TIMING SPECIFICATIONS (VDD = 2.5 TO 5.5 V)

AC CHARACTERISTICS

Standard Operating Cond itions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

OS50 FPLLI PLL Input Frequency Range(2) 4

—

7.5(3)

MHz

EC with 4x PLL

EC with 8x PLL

EC with 16x PLL

XT with 4x PLL

XT with 8x PLL

XT with 16x PLL

OS51 FSYS On-Chip PLL Output(2) 16 — 120 MHz EC, XT modes with PLL

OS52 TLOC PLL Start-up Time (Lock Time) — 20 50 μs

Note 1: These parameters are characterized but not tested in manufacturing.

2: Data i n “Typ” colum n i s at 5V, 25°C unless o the rwis e s tated. Param ete rs ar e for design gu ida nc e on ly and

are not tested.

3: Limited by device operating frequency range.

TABLE 23-16: PLL JITTER

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Characteristic Min Typ(1) Max Units Conditions

OS61 x4 PLL — 0.251 0.413 % -40°C ≤ TA ≤ +85°C VDD = 3.0 to 3.6V

— 0.251 0.413 % -40°C ≤ TA ≤ +125°C VDD = 3.0 to 3.6V

— 0.256 0.47 % -40°C ≤ TA ≤ +85°C VDD = 4.5 to 5.5V

— 0.256 0.47 % -40°C ≤ TA ≤ +125°C VDD = 4.5 to 5.5V

x8 PLL — 0.355 0.584 % -40°C ≤ TA ≤ +85°C VDD = 3.0 to 3.6V

— 0.355 0.584 % -40°C ≤ TA ≤ +125°C VDD = 3.0 to 3.6V

— 0.362 0.664 % -40°C ≤ TA ≤ +85°C VDD = 4.5 to 5.5V

— 0.362 0.664 % -40°C ≤ TA ≤ +125°C VDD = 4.5 to 5.5V

x16 PLL — 0.67 0.92 % -40°C ≤ TA ≤ +85°C VDD = 3.0 to 3.6V

— 0.632 0.956 % -40°C ≤ TA ≤ +85°C VDD = 4.5 to 5.5V

— 0.632 0.956 % -40°C ≤ TA ≤ +125°C VDD = 4.5 to 5.5V

Note 1: These parameters are characterized but not tested in manufacturing.

TABLE 23-17: INTERNAL CLOCK TIMING EXAMPLES

Clock

Oscillator

Mode

FOSC

(MHz)(1) TCY (μsec)(2) MIPS(3)

w/o PLL MIPS(3)

w/PLL x4 MIPS(3)

w/PLL x8 MIPS(3)

w/PLL x16

EC 0.200 20.0 0.05 — — —

4 1.0 1.0 4.0 8.0 16.0

10 0.4 2.5 10.0 20.0 —

25 0.16 6.25 — — —

XT 4 1.0 1.0 4.0 8.0 16.0

10 0.4 2.5 10.0 20.0 —

dsPIC30F6011/6012/6013/6014

Note 1: Assumption: Oscillator Postscaler is divide by 1.

2: Ins truction Execut ion Cycle Time: TCY = 1 / MIPS.

3: Ins truction Execution Frequency: MIPS = (FOSC * PLLx)/4 [since ther e are 4 Q clocks per instruction

cycle].

TABLE 23-17: INTERNAL CLOCK TIMING EXAMPLES

TABLE 23-18: AC CHARACTERISTICS: INTERNAL RC ACCURACY(2)

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industri al

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Characteristic Min Typ Max Units Conditions

Internal FRC Jitter @ FRC Freq. = 7.37 MHz(1)

OS62 FRC — +0.04 +0.16 % -40°C ≤ TA ≤ +85°C VDD = 3.0-3.6V

—+0.07 +0.23 % -40°C ≤ TA ≤ +125°C VDD = 4.5-5.5V

Internal FRC Accuracy @ FRC Freq. = 7.37 MHz(1)

OS63 FRC — — +1.50 % -40°C ≤ TA ≤ +125°C VDD = 3.0-5.5V

Internal FRC Drift @ FRC Freq. = 7.37 MHz(1)

OS64 -0.7 — 0.5 % -40°C ≤ TA ≤ +85°C VDD = 3.0-3.6V

-0.7 — 0.7 % -40°C ≤ TA ≤ +125°C VDD = 3.0-3.6V

-0.7 — 0.5 % -40°C ≤ TA ≤ +85°C VDD = 4.5-5.5V

-0.7 — 0.7 % -40°C ≤ TA ≤ +125°C VDD = 4.5-5.5V

Note 1: Frequency calibrated at 7.372 MHz ±2%, 25°C and 5V. TUN <3:0> bits can be used to compensate for

temperature drift.

2: Overal l FR C va riation can be c al cul ate d by add ing the absolu te v al ues of ji tter, accu racy an d dri ft pe rcen t-

ages.

TABLE 23-19: INTERNAL RC ACCURACY

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operati ng tem pera ture -40°C ≤ TA ≤ +85°C for I ndustrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Characteristic Min Typ Max Units Conditions

LPRC @ Freq. = 512 kHz(1)

OS65 -35 — +35 % —

Note 1: Change of LPRC frequency as VDD changes.

dsPIC30F6011/6012/6013/6014

FIGURE 23-5: CLKO AND I/O TIMING CHARACTERISTICS

Note: Refer to Figur e 23-3 for load conditions.

I/O Pin

(Input)

I/O Pin

(Output)

DI35

Old Value New Value

DI40

DO31

DO32

TABLE 23-20: CLKO AND I/O TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operati ng tem pera ture -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1)(2)(3) Min Typ(4) Max Units Conditions

DO31 TIOR Port output rise time — 7 20 ns —

DO32 TIOF Port output fall time — 7 20 ns —

DI35 TINP INTx pin high or low time (output) 20 — — ns —

DI40 TRBP CNx high or low time (input) 2 TCY ——ns —

Note 1: These parameters are asynchronous events not related to any internal clock edges

2: Measurements are taken in RC mode and EC mode where CLKO output is 4 x TOSC.

3: These parameters are characterized but not tested in manufacturing.

4: Data in “Typ” column is at 5V, 25°C unless otherwise stated.

dsPIC30F6011/6012/6013/6014

FIGURE 23-6: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP

TIMER TIMING CHARACTERISTICS

TABLE 23-21: RESET, WATCHDOG T IMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER

AND BROWN-OUT RESET TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

SY10 TmcL MCLR Pulse Width (low) 2 — — μs -40°C to +85°C

SY11 TPWRT Power-up T im er Period 3

ms -40°C to +85°C

User program ma ble

SY12 TPOR Power On Reset Delay 3 10 30 μs -40°C to +85°C

SY13 TIOZ I/O High-impedance from MCLR

Low or Watchdog Timer Reset —0.81.0μs

SY20 TWDT1 Wat chdog Ti mer T ime -out Perio d

(No Prescaler) 1.4 2.1 2.8 ms VDD = 3.3V, -40°C to

+85°C

TWDT2 1.4 2.1 2.8 ms VDD = 5.0V, -40°C to

+85°C

Note 1: These parameters are characterized but not tested in manufacturing.

2: Data in “Typ” column is at 5V, 25°C unless otherwise stated.

3: Refer to Figure 23-2 and Table 23-11 for BOR.

VDD

MCLR

Internal

POR

PWRT

Time-out

OSC

Time-out

Internal

Reset

Watchdog

Timer

Reset

SY11

SY10

SY20

SY13

I/O Pins

SY13

Note: Refer to Figure 23-3 for load conditions.

FSCM

Delay

SY35

SY30

SY12

dsPIC30F6011/6012/6013/6014

FIGURE 23-7: BAND GAP START-UP TIME CHARACTERISTICS

SY25 TBOR Brown-out Reset Pulse Width(3) 100 — — μsVDD ≤ VBOR (D034)

SY30 TOST Oscillati on Start-up T im er Perio d — 1024 TOSC ——TOSC = OSC1 period

SY35 TFSCM Fail-Safe Clock Monitor Delay — 500 900 μs -40°C to +85°C

TABLE 23-21: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER

AND BROWN-OUT RESET TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

Note 1: These parameters are characterized but not tested in manufacturing.

2: Data in “Typ” column is at 5V, 25°C unless otherwise stated.

3: Refer to Figure 23-2 and Table 23-11 for BOR.

VBGAP

Enable Band Gap

Band Gap

(see Note)

Stable

Note: Set LVDEN bit (RCON<12>) or the BOREN bit (FBORPOR<7>).

SY40

TABLE 23-22: BAND GAP START-UP TIME REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5. 5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extende d

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

SY40 TBGAP Band Gap Start-up Time — 40 65 µs Defined as the time between the

instant that the band gap is enabled

and the moment that the band gap

reference voltage is stable.

RCON<13>Status bit

Note 1: These parameters are characterized but not tested in manufacturing.

2: Data in “Typ” column is at 5V, 25°C unless otherwise stated.

dsPIC30F6011/6012/6013/6014

FIGURE 23-8: TYPE A, B AND C TIMER EXTERNAL CLOCK TIMING CHARACTERISTICS

TABLE 23-23: TYPE A TIMER (TIMER1) EXTERNAL CLOCK TIMING REQUIREMENTS(1)

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operati ng tem pe rature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Typ Max Units Conditions

TA10 TTXH TxCK High Time Synchronous,

no prescaler 0.5 TCY + 20 — — ns Must also meet

parameter TA15

Synchronous,

with prescaler 10 — — ns

Asynchronous 10 — — ns

TA11 TTXL TxCK Low Time Synchronous,

no prescaler 0.5 TCY + 20 — — ns Must also meet

parameter TA15

Synchronous,

with prescaler 10 — — ns

Asynchronous 10 — — ns

TA15 TTXP TxCK Input Period Synchronous,

no prescaler TCY + 10 — — ns

Synchronous,

with prescaler Greater of:

20 ns or

(TCY + 40)/ N

———N = prescale

value

(1, 8, 64, 256)

Asynchronous 20 — — ns

OS60 Ft1 SOSC1/T1CK oscillator input

frequency range (oscillator enabled

by setting bit TCS (T1CON, bit 1))

DC — 50 kHz

TA20 TCKEXTMRL Delay from External TxCK Clock

Edge to Timer Increment 0.5 TCY 1.5

TCY —

Note 1: Timer1 is a Type A.

Note: Refer to Figure 23- 3 for l oad conditions.

Tx11

Tx15

Tx10

Tx20

TMRX OS60

TxCK

dsPIC30F6011/6012/6013/6014

TABLE 23-24: TYPE B TIMER (TIMER2 AND TIMER4) EXTERNAL CLOCK TIMING

REQUIREMENTS(1)

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operati ng tem pe rature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Typ Max Units Conditions

TB10 TtxH TxC K H igh Time Synchronous,

no prescaler 0.5 TCY + 20 — — ns Must also meet

parameter TB15

Synchronous,

with prescaler 10 — — ns

TB11 TtxL TxCK Low Time Synchronous,

no prescaler 0.5 TCY + 20 — — ns Must also meet

parameter TB15

Synchronous,

with prescaler 10 — — ns

TB15 TtxP TxCK Input Period Synchronous,

no prescaler TCY + 10 — — ns N = prescal e

value

(1, 8, 64, 256)

Synchronous,

with prescaler Greater of:

20 ns or

(TCY + 40)/N

TB20 TCKEXT-

MRL Delay from External TxCK Clock

Edge to Timer Increment 0.5 TCY — 1.5 TCY —

Note 1: Timer2 and Timer4 are Type B.

TABLE 23-25: TYPE C TIMER (TIMER3 AND TIMER5) EXTERNAL CLOCK TIMING

REQUIREMENTS(1)

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operati ng tem pera ture -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Typ Max Units Conditions

TC10 TtxH TxCK High Time Synchronous 0.5 TCY + 20 — — ns Must also meet

parameter TC15

TC11 TtxL TxCK Low Time Synchronous 0.5 TCY + 20 — — ns Must also meet

parameter TC15

TC15 TtxP TxCK Input Period Synchronous,

no prescaler TCY + 10 — — ns N = prescale

value

(1, 8, 64, 256)

Synchronous,

with presca ler Greater of:

20 ns or

(TCY + 40)/N

TC20 TCKEXT-

MRL Delay from External TxCK Clock

Edge to Timer Increment 0.5 TCY —1.5

TCY —

Note 1: Timer3 and Timer5 are Type C.

dsPIC30F6011/6012/6013/6014

FIGURE 23-9: INPUT CAPTURE (CAPx) TIMING CHARACTERISTICS

FIGURE 23-10: OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS

TABLE 23-26: INPUT CAPTURE TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industri al

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Max Units Conditions

IC10 TccL ICx Input Low Time No Prescaler 0.5 TCY + 20 — ns

With Prescaler 10 — ns

IC11 TccH ICx Input High Time No Prescaler 0.5 TCY + 20 — ns

With Prescaler 10 — ns

IC15 TccP ICx Input Period (2 TCY + 40)/N — ns N = prescale

value (1, 4, 16)

Note 1: These parameters are characterized but not tested in manufacturing.

TABLE 23-27: OUTPUT COMPARE MODULE TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Ope rati ng temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

OC10 TccF OCx Output Fall Time — — — ns See Parameter D032

OC11 TccR OCx Output Rise Time — — — n s See Parameter D031

Note 1: These parameters are characterized but not tested in manufacturing.

2: Dat a in “Ty p” colu mn is at 5V, 25°C unless otherwi se st ated. Para meters are for desi gn guida nce onl y and

are not t ested.

ICX

IC10 IC11

IC15

Note: Refer to Figure 23-3 for load conditions.

OCx

OC11 OC10

(Output Compare

Note: Refer to Figure 23-3 for load conditions.

or PWM Mode)

dsPIC30F6011/6012/6013/6014

FIGURE 23-11: O C/PWM MODULE TIMING CHARACTERISTICS

TABLE 23-28: SIMPLE OC/PWM MODE TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Ope rati ng temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

OC15 TFD Fault Input to PWM I/O

Change ——50ns —

OC20 TFLT Fault Input Pulse Width 50 — — ns —

Note 1: These parameters are characterized but not tested in manufacturing.

2: Dat a in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

OCFA/OCFB

OCx

OC20

OC15

dsPIC30F6011/6012/6013/6014

FIGURE 23-12: DCI MODULE (MULTICHANNEL, I2S MODES) TIMING CHARACTERISTICS

COFS

CSCK

(SCKE =

)

CSCK

(SCKE =

)

CSDO

CSDI

CS11 CS10

CS40 CS41

CS21

CS20

CS35

CS21

MSb LSb

MSb IN LSb IN

CS31

HIGH-Z HIGH-Z

CS30

CS51 CS50

CS55

Note: Refer to Figure 23-3 for load conditions.

CS20

CS56

dsPIC30F6011/6012/6013/6014

TABLE 23-29: DCI MODULE (MULTICHANNEL, I2S MODES) TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industri al

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

CS10 TcSCKL CSCK Input Low Time

(CSCK pin is an input) TCY/2 + 20 — — ns —

CSCK Output Low Time(3)

(CSCK pin is an output) 30 — — ns —

CS11 TcSCKH CSCK Input High Time

(CSCK pin is an input) TCY/2 + 20 — — ns —

CSCK Output High Time(3)

(CSCK pin is an output) 30 — — ns —

CS20 TcSCKF CSCK Output Fall Time(4)

(CSCK pin is an output) —1025ns —

CS21 TcSCKR CSCK Output Rise Time(4)

(CSCK pin is an output) —1025ns —

CS30 TcSDOF CSDO Da ta Output Fall Time(4) —1025ns —

CS31 TcSDOR CSDO Da ta Output Rise Time(4) —1025ns —

CS35 TDV Clock edge to CSDO data valid — — 10 ns —

CS36 TDIV Clock edge to CSDO tri-stated 10 — 20 ns —

CS40 TCSDI Setup time of CSDI data input to

CSCK edge (CSCK pin is input

or output)

20 — — ns —

CS41 THCSDI Hold time of CSDI data input to

CSCK edge (CSCK pin is input

or output)

20 — — ns —

CS50 TcoFSF(1) COFS Fall Time

(COFS pin is output) —1025ns —

CS51 TcoFSR(1) COFS Rise Time

(COFS pin is output) —1025ns —

CS55 TscoFS Setup time of COFS data input to

CSCK edge (COFS pin is input) 20 — — ns —

CS56 THCOFS Hold time of COFS data input to

CSCK edge (COFS pin is input) 20 — — ns —

Note 1: These parameters are characterized but not tested in manufacturing.

2: Dat a in “Typ” colu mn is at 5V, 25°C unle ss ot herwise st ate d. Paramete rs a re for d esign guida nce o nly an d

are not t ested.

3: The minimum clock period for CSCK is 100 ns. Therefore, the clock generated in Master mode must not

violate this specification.

4: Assumes 50 pF load on all DCI pins.

dsPIC30F6011/6012/6013/6014

FIGURE 23-13: DCI MODULE (AC-LINK MODE) TIMING CHARACTERISTICS

TABLE 23-30: DCI MODULE (AC-LINK MODE) TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industri al

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1)(2) Min Typ(3) Max Units Conditions

CS60 TBCLKL BIT_CLK Low Ti me 36 40.7 45 ns —

CS61 TBCLKH BIT_CLK High Time 36 40.7 45 ns —

CS62 TBCLK BIT_CLK Period — 81.4 — ns Bit clock is input

CS65 TSACL Input Setup Time to

Falling Edge of BIT_CLK ——10 ns —

CS66 THACL Input Hold Time from

Falling Edge of BIT_CLK ——10 ns —

CS70 TSYNCLO SYNC Data Output Low Time(1) —19.5 — μs—

CS71 TSYNCHI SYNC Data Output High

Time(1) —1.3 — μs—

CS72 TSYNC SYNC Data Output Period(1) —20.8 — μs—

CS75 TRACL Rise Time, SYNC,

SDATA_OUT —1025 nsCLOAD = 50 pF, VDD =

CS76 TFACL Fall Time, SYNC, SDATA_OUT — 10 25 ns CLOAD = 50 pF, VDD =

CS77 TRACL Rise Time, SYNC,

SDATA_OUT —TBDTBD nsCLOAD = 50 pF, VDD =

Note 1: These parameters are characterized but not tested in manufacturing.

2: These values assume BIT_CLK frequency is 12.288 MHz.

3: Dat a in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

SYNC

BIT_CLK

SDO

SDI

CS61 CS60

CS65 CS66

CS80

CS21

MSb IN

CS75

LSb

CS76

(COFS)

(CSCK)

LSb

MSb

CS72

CS71 CS70

CS76 CS75

(CSDO)

(CSDI)

CS62 CS20

dsPIC30F6011/6012/6013/6014

FIGURE 23-14: SPI MODULE MASTER MODE (CKE = 0) TIMING CHARACTERISTICS

CS78 TFACL Fall Time, SYNC, SDATA_OUT — TBD TBD ns CLOAD = 50 pF, VDD =

CS80 TOVDACL Output valid delay from rising

edge of BIT_CLK ——15ns —

TABLE 23-31: SPI MASTER MODE (CKE = 0) TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operati ng tem per ature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

SP10 TscL SCKX Output Low Time(3) TCY / 2 — — ns —

SP11 TscH SCKX Output High Time(3) TCY/2 — — ns —

Note 1: These parameters are characterized but not tested in manufacturing.

2: Dat a in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

3: The minimum clock period for SCK is 100 ns. Therefore, the clock generated in Master mode must not

violate this specification.

4: Assumes 50 pF load on all SPI pins.

TABLE 23-30: DCI MODULE (AC-LINK MODE) TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industri al

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1)(2) Min Typ(3) Max Units Conditions

Note 1: These parameters are characterized but not tested in manufacturing.

2: These values assume BIT_CLK frequency is 12.288 MHz.

3: Dat a in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

SCKx

(CKP = 0)

SCKx

(CKP = 1)

SDOx

SDIx

SP11 SP10

SP40 SP41

SP21

SP20

SP35

SP20

SP21

MSb LSb

BIT14 - - - - - -1

MSb IN LSb IN

BIT14 - - - -1

SP30

SP31

Note: Refer to Figur e 23-3 for load conditio ns.

dsPIC30F6011/6012/6013/6014

FIGURE 23-15: SPI MODULE MASTER MODE (CKE = 1) TIMING CHARACTERISTICS

SP20 TscF SCKX Output Fall Time(4) — — — ns See para me ter

D032

SP21 TscR SCKX Output Rise Time(4) — — — ns See parameter

D031

SP30 TdoF SDOX Data Output Fall Time(4) — — — ns See parameter

D032

SP31 TdoR SDOX Data Output Rise

Time(4) — — — ns See parameter

D031

SP35 TscH2doV,

TscL2doV SDOX Data Output Valid after

SCKX Edge — — 30 ns —

SP40 TdiV2scH,

TdiV2scL Setup Time of SDIX Data Input

to SCKX Edge 20 — — ns —

SP41 TscH2diL,

TscL2diL Hold Time of SDIX Data Input

to SCKX Edge 20 — — ns —

TABLE 23-31: SPI MASTER MODE (CKE = 0) TIMING REQUIREMENTS (CONTINUED)

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operati ng tem per ature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

Note 1: These parameters are characterized but not tested in manufacturing.

2: Dat a in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

3: The minimum clock period for SCK is 100 ns. Therefore, the clock generated in Master mode must not

violate this specification.

4: Assumes 50 pF load on all SPI pins.

SCKX

(CKP = 0)

SCKX

(CKP = 1)

SDOX

SDIX

SP36

SP30,SP31

SP35

MSb

MSb IN

BIT14 - - - - - -1

LSb IN

BIT14 - - - -1

LSb

Note: Refer to Figure 23-3 for load conditions.

SP11 SP10 SP20

SP21

SP20

SP40

SP41

dsPIC30F6011/6012/6013/6014

FIGURE 23-16: SPI MODULE SLAVE MODE (CKE = 0) TIMING CHARACTERISTICS

TABLE 23-32: SPI MODULE MASTER MODE (CKE = 1) TIMING REQUIREMENTS

AC CHARACTERISTICS

St a ndard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extende d

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

SP10 TscL SCKX output low time(3) TCY/2 — — ns —

SP11 TscH SCKX output high time(3) TCY/2 — — ns —

SP20 TscF SCKX output fall time(4) — — — ns See parameter

D032

SP21 TscR SCKX output rise time(4) — — — ns See para me ter

D031

SP30 TdoF SDOX data output fall time(4) — — — ns See parameter

D032

SP31 TdoR SDOX data output rise time(4) — — — ns See parameter

D031

SP35 TscH2doV,

TscL2doV SDOX data output valid after

SCKX edge ——30ns —

SP36 TdoV2sc,

TdoV2scL SDOX data output setup to

first SCKX edge 30 — — ns —

SP40 TdiV2scH,

TdiV2scL Setup time of SDIX data input

to SCKX edge 20 — — ns —

SP41 TscH2diL,

TscL2diL Hold time of SDIX data input

to SCKX edge 20 — — ns —

Note 1: These parameters are characterized but not tested in manufacturing.

2: Dat a in “Typ” column is at 5V, 25°C unl ess oth erwise s tate d. Parame ters are for de sign gu idanc e only an d

are not t ested.

3: The minimum clock period for SCK is 100 ns. Therefore, the clock generated in master mode must not

violate this specification.

4: Assumes 50 pF load on all SPI pins.

SCK

(CKP =

)

SCK

(CKP =

)

SDO

SDI

SP50

SP40 SP41

SP30,SP31 SP51

SP35

SDI

MSb LSb

BIT14 - - - - - -1

MSb IN BIT14 - - - -1 LSb IN

SP52

SP73

SP72

SP73

SP71 SP70

Note: Refer to Figure 23-3 for load conditions.

dsPIC30F6011/6012/6013/6014

TABLE 23-33: SPI MODULE SLAVE MODE (CKE = 0) TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

SP70 TscL SCKX Input Low Time 30 — — ns —

SP71 TscH SCKX Input High Time 30 — — ns —

SP72 TscF SCKX Input Fall Time(3) —1025ns —

SP73 TscR SCKX Input Rise Time(3) —1025ns —

SP30 TdoF SDOX Data Output Fall Time(3) — — — ns See parameter

D032

SP31 TdoR SDOX Data Output Rise Time(3) — — — ns See parameter

D031

SP35

TscH2doV,

TscL2doV

SDOX Data Output Valid after

SCKX Edge — — 30 ns —

SP40 TdiV2scH,

TdiV2scL Setup Time of SDIX Data Input

to SCKX Edge 20 — — ns —

SP41 TscH2diL,

TscL2diL Hold Time of SDIX Data Input

to SCKX Edge 20 — — ns —

SP50 TssL2scH,

TssL2scL SSX↓ to SCKX↑ or SCKX↓ Input 120 — — ns —

SP51 TssH2doZ SSX↑ to SDOX Output

Hi-Impedance(3) 10 — 50 ns —

SP52 TscH2ssH

TscL2ssH SSX after SCK Edge 1.5 TCY +

40 ——ns —

Note 1: These parameters are characterized but not tested in manufacturi ng.

2: Data in “Typ” column i s at 5V, 25°C unl ess o therwise st ated. Pa ramete rs are f or desi gn gui dance on ly and

are not tested.

3: Assumes 50 pF load on all SPI pins.

dsPIC30F6011/6012/6013/6014

FIGURE 23-17: SPI MODULE SLAVE MODE (CKE = 1) TIMING CHARACTERISTICS

TABLE 23-34: SPI MODULE SLAVE MODE (CKE = 1) TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

SP70 TscL SCKX Input Low Time 30 — — ns —

SP71 TscH SCKX Input High Time 30 — — ns —

SP72 TscF SCKX Input Fall Time(3) —1025ns —

SP73 TscR SCKX Input Rise Time(3) —1025ns —

SP30 TdoF SDOX Data Output Fall Ti me(3) — — — ns See parameter

D032

SP31 TdoR SDOX Data Output Rise Time(3) — — — ns See parameter

D031

SP35 TscH2doV,

TscL2doV SDOX Data Output Valid after

SCKX Edge ——30ns —

SP40 TdiV2scH,

TdiV2scL Setup Time of SDIX Data Input

to SCKX Edge 20 — — ns —

SP41 TscH2diL,

TscL2diL Hold Time of SDIX Data Input

to SCKX Edge 20 — — ns —

Note 1: These parameters are characterized but not tested in manufacturing.

2: Data i n “Typ” column is at 5V, 25°C unless oth erw is e stated. Parame ters are fo r des ign gui dan ce only and

are not tested.

3: The minimum clock period for SCK is 100 ns. Therefore, the clock generated in master mode must not

violate this specificat ion.

4: Assumes 50 pF load on all SPI pins.

SSX

SCKX

(CKP = 0)

SCKX

(CKP = 1)

SDOX

SDI

SP50

SP60

SDIX

SP30,SP31

MSb BIT14 - - - - - -1 LSb

SP51

MSb IN BIT14 - - - -1 LSb IN

SP35

SP52

SP73

SP72

SP73

SP71 SP70

SP40 SP41

Note: Refer to Figure 23-3 for load conditions.

dsPIC30F6011/6012/6013/6014

FIGURE 23-18 : I2C™ BUS START/STOP BITS TIMING CHARACTERISTICS (MASTER MODE)

FIGURE 23-19 : I2C™ BUS DATA TIMING CHARACTERISTICS (MASTER MODE)

SP50 TssL2scH,

TssL2scL SSX↓ to SCKX↓ or SCKX↑ input 120 — — ns —

SP51 TssH2doZ SS↑ to SDOX Output

Hi-Impedance(4) 10 — 50 ns —

SP52 TscH2ssH

TscL2ssH SSX↑ after SCKX Edge 1.5 TCY + 40 — — ns —

SP60 TssL2doV SDOX Data Output Valid after

SSX Edge ——50ns —

TABLE 23-34: SPI MODULE SLAVE MODE (CKE = 1) TIMING REQUIREMENTS (CONTINUED)

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

Note 1: These parameters are characterized but not tested in manufacturing.

2: Data i n “Typ” column is at 5V, 25°C unless oth erw is e stated. Parame ters are fo r des ign gui dan ce only and

are not tested.

3: The minimum clock period for SCK is 100 ns. Therefore, the clock generated in master mode must not

violate this specificat ion.

4: Assumes 50 pF load on all SPI pins.

IM31 IM34

SCL

SDA

Start

Condition Stop

Condition

IM30 IM33

Note: Refer to Figure 23-3 for load conditions.

IM11 IM10 IM33

IM11 IM10

IM20

IM26 IM25

IM40 IM40 IM45

IM21

SCL

SDA

Out

Note: Re fer to Figure 23-3 for load conditions.

dsPIC30F6011/6012/6013/6014

TABLE 23-35: I2C™ BUS DATA TIMING REQUIREMENTS (MASTER MODE)

AC CHARACTERISTICS

Standard Operating Conditions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min(1) Max Units Conditions

IM10 TLO:SCL Clock Low Time 100 kHz mode TCY/2 (BRG + 1) — μs—

400 kHz mode TCY/2 (BRG + 1) — μs—

1 MHz mode(2) TCY/2 (BRG + 1) — μs—

IM11 THI:SCL Clock High Time 100 kHz mode TCY/2 (BRG + 1) — μs—

400 kHz mode TCY/2 (BRG + 1) — μs—

1 MHz mode(2) TCY/2 (BRG + 1) — μs—

IM20 TF:SCL SDA and SCL

Fall Time 100 kHz mode — 300 ns CB is specified to be

from 10 to 400 pF

400 kHz mode 20 + 0.1 CB300 ns

1 MHz mode(2) — 100 ns

IM21 TR:SCL SDA and SCL

Rise Time 100 kHz mode — 1000 ns CB is specified to be

from 10 to 400 pF

400 kHz mode 20 + 0.1 CB300 ns

1 MHz mode(2) — 300 ns

IM25 TSU:DAT Data Input

Setup Time 100 kHz mode 250 — ns —

400 kHz mode 100 — ns

1 MHz mode(2) TBD — ns

IM26 THD:DAT Data Input

Hold Time 100 kHz mode 0 — ns —

400 kHz mode 0 0.9 μs

1 MHz mode(2) TBD — ns

IM30 TSU:STA Start Condition

Setup Time 100 kHz mode TCY/2 (BRG + 1) — μs Only relevant for

repeated Start

condition

400 kHz mode TCY/2 (BRG + 1) — μs

1 MHz mode(2) TCY/2 (BRG + 1) — μs

IM31 THD:STA Start Condition

Hold Time 100 kHz mode TCY/2 (BRG + 1) — μs After this period the

first clock pulse is

generated

400 kHz mode TCY/2 (BRG + 1) — μs

1 MHz mode(2) TCY/2 (BRG + 1) — μs

IM33 TSU:STO Stop Condition

Setup Time 100 kHz mode TCY/2 (BRG + 1) — μs—

400 kHz mode TCY/2 (BRG + 1) — μs

1 MHz mode(2) TCY/2 (BRG + 1) — μs

IM34 THD:STO Stop Condition 100 kHz mode TCY/2 (BRG + 1) — ns —

Hold Ti me 400 kHz mode TCY/2 (BRG + 1) — ns

1 MHz mode(2) TCY/2 (BRG + 1) — ns

IM40 TAA:SCL Output Valid

From Clock 100 kHz mode — 3500 ns —

400 kHz mode — 1000 ns —

1 MHz mode(2) ——ns —

IM45 TBF:SDA Bus Free Time 100 kHz mode 4.7 — μs Time the bus mus t be

free before a new

transmission can start

400 kHz mode 1.3 — μs

1 MHz mode(2) TBD — μs

IM50 CBBus Capacitive Loading — 400 pF

Note 1: BRG is the val ue of th e I2C Bau d Rate G ene rato r. Refer to the “Int er-Inte grated Circuit™ (I2C)” se cti on

in the “dsPIC30F Fa mily Reference M anual” (DS70046).

2: Maximum pin capacitance = 10 pF for all I2C pins (for 1 MHz mode only).

dsPIC30F6011/6012/6013/6014

FIGURE 23-20 : I2C™ BUS START/STOP BITS TIMING CHARACTERISTICS (SLAVE MODE)

FIGURE 23-21 : I2C™ BUS DATA TIMING CHARACTERISTICS (SLAVE MODE)

TABLE 23-36: I2C™ BUS DATA TIMING REQUIREMENTS (SLAVE MODE)

AC CHARACTERISTICS

Standard Operating Cond itions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Max Units Conditions

IS10 TLO:SCL Clock Low Time 100 kHz mode 4.7 — μs Device must operate at a

minimum of 1.5 MHz

400 kHz mode 1.3 — μs Device must operate at a

minimum of 10 MHz.

1 MHz mode(1) 0.5 — μs—

IS11 THI:SCL Clock High Time 100 kHz mode 4.0 — μs Device must operate at a

minimum of 1.5 MHz

400 kHz mode 0.6 — μs Device must operate at a

minimum of 10 MHz

1 MHz mode(1) 0.5 — μs—

IS20 TF:SCL SDA and SCL

Fall Time 100 kHz mode — 300 ns CB is specified to be from

10 to 400 pF

400 kHz mode 20 + 0.1 CB300 ns

1 MHz mode(1) — 100 ns

IS21 TR:SCL SDA and SCL

Rise Time 100 kHz mode — 1000 ns CB is specified to be from

10 to 400 pF

400 kHz mode 20 + 0.1 CB300 ns

1 MHz mode(1) — 300 ns

Note 1: Maximum pin capacitance = 10 pF for all I2C pins (for 1 MHz mode only).

IS31 IS34

SCL

SDA

Start

Condition Stop

Condition

IS30 IS33

IS30 IS31 IS33

IS11

IS10

IS20

IS26 IS25

IS40 IS40 IS45

IS21

SCL

SDA

Out

dsPIC30F6011/6012/6013/6014

IS25 TSU:DAT Data Input

Setup Time 100 kHz mode 250 — ns —

400 kHz mode 100 — ns

1 MHz mode(1) 100 — ns

IS26 THD:DAT Data Input

Hold Time 100 kHz mode 0 — ns —

400 kHz mode 0 0.9 μs

1 MHz mode(1) 00.3μs

IS30 TSU:STA Start Condition

Setup Time 100 kHz mode 4.7 — μs Only relevant for repeated

Start condition

400 kHz mode 0.6 — μs

1 MHz mode(1) 0.25 — μs

IS31 THD:STA Start Condition

Hold Time 100 kHz mode 4.0 — μs After this period the first

clock pulse is generated

400 kHz mode 0.6 — μs

1 MHz mode(1) 0.25 — μs

IS33 TSU:STO Stop Conditi on

Setup Time 100 kHz mode 4.7 — μs—

400 kHz mode 0.6 — μs

1 MHz mode(1) 0.6 — μs

IS34 THD:STO Stop Condition 100 kHz mode 4000 — ns —

Hold Time 400 kHz mode 600 — ns

1 MHz mode(1) 250 ns

IS40 TAA:SCL Output Valid

From Clock 100 kHz mode 0 3500 ns —

400 kHz mode 0 1000 ns

1 MHz mode(1) 0 350 ns

IS45 TBF:SDA Bus Free Time 100 kHz mode 4.7 — μs Time the bus must be free

before a new transmission

can start

400 kHz mode 1.3 — μs

1 MHz mode(1) 0.5 — μs

IS50 CBBus Capacitive

Loading — 400pF —

TABLE 23-36: I2C™ BUS DATA TIMING REQUIREMENTS (SLAVE MODE) (CONTINUED)

AC CHARACTERISTICS

Standard Operating Cond itions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min Max Units Conditions

Note 1: Maximum pin capacitance = 10 pF for all I2C pins (for 1 MHz mode only).

dsPIC30F6011/6012/6013/6014

FIGURE 23-22: CAN MODULE I/O TIMING CHARACTERISTICS

TABLE 23-37: CAN MODULE I/O TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Cond itions: 2.5V to 5.5V

(unless otherwise st ated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic(1) Min Typ(2) Max Units Conditions

CA10 TioF Port Output Fall Time — — — ns See parameter

D032

CA11 TioR Port Outpu t Ris e Time — — — ns See par ameter

D031

CA20 Tcwf Pulse Width to Trigger

CAN W ake-up Filter 500 ns —

Note 1: These parameters are characterized but not tested in manufacturing.

2: Dat a in “Typ” column is at 5V, 25°C unless o therw ise st ate d. Parame ters are for desi gn gui dance only an d

are not t ested.

CXTX Pin

(output)

CA10 CA11

Old Value New Value

CA20

CXRX Pin

(input)

dsPIC30F6011/6012/6013/6014

TABLE 23-38: 12-BIT ADC MODULE SPECIFICATIONS

AC CHARACTERISTICS

Standard Operating Conditions: 2.7V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Exten ded

Param

No. Symbol Characteristic Min. Typ Max. Units Conditions

Device Supply

AD01 AVDD Module VDD Supply Greate r of

VDD - 0.3

or 2.7

— Lesser of

VDD + 0.3

or 5.5

V—

AD02 AVSS Module VSS Supply VSS - 0.3 — VSS + 0.3 V —

Reference Inputs

AD05 VREFH Reference Voltage High AVSS + 2.7 — AVDD V—

AD06 VREFL Reference Voltage Low AVSS —AVDD - 2.7 V —

AD07 VREF Absolute Reference

Voltage AVSS - 0.3 — AVDD + 0.3 V —

AD08 IREF Current Drain — 180

.001 300

2μA

μAA/D operati ng

A/D off

Analog Input(1)

AD10 VINH-VINL Full-Scale Input Span VREFL VREFH VSee Note 1

AD11 VIN Absolute Input Voltage AVSS - 0.3 AVDD + 0.3 V —

AD12 — Leakage Current — ±0.001 ±0.610 μAV

INL = AVSS = VREFL =

0V, AVDD = VREFH = 5V

Source Impedance =

2.5 KΩ

AD13 — Leakage Current — ±0.001 ±0.610 μAVINL = AVSS = VREFL =

0V, AVDD = VREFH = 3V

Source Impedance =

2.5 KΩ

AD17 RIN Recomm ended Impe dance

of Analog Voltage Source — — 2.5K Ω—

DC Accuracy(1)

AD20 Nr Resolution 12 data bits bits

AD21 INL Integral Nonlinearity(2) ——<±1LSbVINL = AVSS = VREFL =

0V, AVDD = VREFH = 5V

AD21A INL Integral Nonlinearity(2) ——<±1LSbVINL = AVSS = VREFL =

0V, AVDD = VREFH = 3V

AD22 DNL Differential Nonlinearity(2) ——<±1LSbVINL = AVSS = VREFL =

0V, AVDD = VREFH = 5V

AD22A DNL Differential Nonlinearity(2) ——<±1LSbVINL = AVSS = VREFL =

0V, AVDD = VREFH = 3V

AD23 GERR Gain Error(2) +1.25 +1.5 +3 LSb VINL = AVSS = VREFL =

0V, AVDD = VREFH = 5V

AD23A GERR Gain Error(2) +1.25 +1.5 +3 LSb VINL = AVSS = VREFL =

0V, AVDD = VREFH = 3V

AD24 EOFF Offset Error -2 -1.5 -1.25 LSb VINL = AVSS = VREFL =

0V, AVDD = VREFH = 5V

Note 1: These parameters are characterized but not tested in manufacturing.

2: Measurements taken with external VREF+ and VREF- used as the ADC voltage references.

3: The A/D conversio n resul t neve r decre as es w ith an inc rea se in the inp ut vol t ag e, and has no miss in g

codes.

dsPIC30F6011/6012/6013/6014

AD24A EOFF Offset Error -2 -1.5 -1.25 LSb VINL = AVSS = VREFL =

0V, AVDD = VREFH = 3V

AD25 — Monotonicity(3) — — — — Guaranteed

Dynamic Performance

AD30 THD Total Ha rmoni c Di sto rtio n — -71 — dB —

AD31 SINAD Signal to Noise and

Distortion —68—dB —

AD32 SFDR Spurious Free Dynamic

Range —83—dB —

AD33 FNYQ Input Signal Bandwidth — — 100 kHz —

AD34 ENOB Effective Number of Bits 10.95 11.1 — bits —

TABLE 23-38: 12-BIT ADC MODULE SPECIFICATIONS (CONTINUED)

AC CHARACTERISTICS

Standard Operating Conditions: 2.7V to 5.5V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Exten ded

Param

No. Symbol Characteristic Min. Typ Max. Units Conditions

Note 1: These parameters are characterized but not tested in manufacturing.

2: Measurements taken with external VREF+ and VREF- used as the ADC voltage references.

3: The A/D conversio n resul t neve r decre as es w ith an inc rea se in the inp ut vol t ag e, and has no miss in g

codes.

dsPIC30F6011/6012/6013/6014

FIGURE 23-23: 12-BIT A/D CONVERSION TIMING CHARACTERISTICS (ASAM = 0, SSRC = 000)

AD55

TSAMP

Clear SAMPSet SAMP

AD61

ADCLK

Instruction

SAMP

ch0_dischrg

ch0_samp

AD60

DONE

ADIF

ADRES(0)

1 2 3 4 5 6 87

1– Software sets ADCON. SAMP to start sampling.

2– Sampling starts after discharge period.

3– Software clears ADCON. SAMP to start conversion.

4– Sampling ends, conversion sequence starts.

5– Convert bit 11.

9– One TAD for end of conversion.

AD50

eoc

6– Convert bit 10.

7– Convert bit 1.

8– Convert bit 0.

Execution

TSAMP is described in the “dsPIC30F Family Reference Manua l” (DS70046), Section 18.

dsPIC30F6011/6012/6013/6014

TABLE 23-39: 12-BIT A/D CONVERSION TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 2.7V to 5.5V

(unless otherwise stated)

Operati ng tem pe rature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No. Symbol Characteristic Min. Typ Max. Units Conditions

Clock Parameters

AD50 TAD A/D Clock Period — 334 — ns VDD = 3-5.5V (Note 1)

AD51 tRC A/D Interna l RC Oscillat or Period 1.2 1.5 1.8 μs—

Conversion Rate

AD55 tCONV Conversion Time — 14 TAD —ns —

AD56 FCNV Throughput Rate — 200 — ksps VDD = VREF = 3-5.5V

AD57 TSAMP Sample Time — 1 TAD —nsVDD = 3-5.5V

Source resis tance

Rs = 0-2.5 kΩ

Timing Parameters

AD60 tPCS Conversion Start from Sample

Trigger —1 TAD —ns —

AD61 tPSS Samp le St a rt from Setti ng

Sample (SAMP) Bit 0.5 TAD —1.5

TAD ns —

AD62 tCSS Conversion Completion to

Sample Start (ASAM = 1)—0.5 TAD —ns —

AD63 tDPU Time to Stabilize Analog Stage

from A/D Off to A/D On —20—μs—

Note 1: Because the sample caps will eventually lose charge, clock rates below 10 kHz can affect linearity

performance, especially at elevated temperatures.

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

24.0 PACKAGING INFORMATION

24.1 Package Marking Information

XXXXXXXXXXXX

YYWWNNN

64-Lead TQFP (14x14x 1m m)

dsPIC30F6011

-30I/PF

041444R

Example

XXXXXXXXXXXX

YYWWNNN

80-Lead TQFP (14x14x1mm)

dsPIC30F6014

-30I/PF

041444R

Example

Legend: XX...X Customer-specific information

Y Year code (last digit of calendar year)

YY Year code (last 2 digits of calendar year)

WW Week code (week of January 1 is week ‘01’)

NNN Alphanumeric traceability code

Pb-free JEDEC designator for Matte Tin (Sn)

*This package is Pb-free. The Pb-free JEDEC designator ( )

can be found on the outer packaging for this package.

Note: In the event the ful l Micro chip p art num ber can not be ma rke d on one li ne, it will

be carried over to the next line, thus limiting the number of available

characters for customer-specific information.

dsPIC30F6011/6012/6013/6014

64-Lead Plastic Thin Quad Flatp ack (PF) 14x14x1 mm Body, 1.0/0.10 mm Lead Form (TQFP)

Note: For the most current package drawings, please see the Microchip Packaging Specification located at

http://www.microchip.com/packaging

(F)L

#leads = n1

Dimensions D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side.

.630 BSC

NOM

INCHES

.630 BSC

.551 BSC

Overall Width

Overall Length

Foot Angle

Foot Length

Pins per Side

Overall Height

Number of Pins

Lead Width

Drawing No. C04-066

Lead Thickness

Mo l ded P ackage Thi ckness

Controlli ng Parameter

JEDEC Equivalent: MS-026

Mold Draft Angle Bottom

Mold Draft Angle Top

Mo l ded P ackage Width

Molded Package Length

Footprint

Notes:

Pitch

Standoff

Dimension Limits

(F)

.012

.004

.018

MIN

Units

.037

.002

121112 13

.015

3.5

.039 REF

.024

.018

.008

.030

.031 BSC

.039

.041

.006

.047

MAX

16.00 BSC

14.00 BSC

0.30

0.09

0.45

0.37

1.00 REF

0.60

3.5

MILLIMETERS

0.95

0.05

MIN

0.80 BSC

1.00

NOM

0.45

0.20

0.75

1.05

0.15

1.20

MAX

Revised 7-20-06

BSC: Basic Dimension. Theoretically exact value shown without tolerances.

See ASME Y14.5M

dsPIC30F6011/6012/6013/6014

80-Lead Plastic Thin Quad Flatp ack (PF) 14x14x1 mm Body, 1.0/0.10 mm Lead Form (TQFP)

Note: For the most current package drawings, please see the Microchip Packaging Specification located at

http://www.microchip.com/packaging

#leads = n1

(F)

Dimensions D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side.

.630 BSC

NOM

INCHES

.630 BSC

.551 BSC

Overall Width

Overall Length

Foot Angle

Foot Length

Pins per Side

Overall Height

Number of Pins

Lead Width

Revised 7-20-06

Lead Thickness

Molded Package Thickness

Controlling Parameter

JEDEC Equivalent: MS-026

Mold Draft Angle Bottom

Mold Draft Angle Top

Molded Package Width

Molded Package Length

Footprint

Notes:

Pitch

Standoff

Dimension Limits

11°

.011

.004

.018

0°

MIN

Units

.037

.002

12°

.013

3.5°

.039 REF.

.024

.015

.008

13°

.030

7°

.026

.039

.041

.006

.047

MAX

16.00 BSC

14.00 BSC

0.27

0.09

0.45

0°

0.32

1.00 REF.

0.60

3.5°

MILLIMETERS*

0.95

0.05

MIN

0.65

1.00

NOM 80

0.37

0.20

0.75

7°

1.05

0.15

1.20

MAX

13°12°11°

12°11° 11°13° 12° 13°

REF: Reference Dimension, usually without tolerance, for information purposes only.

BSC: Basic Dimension. Theoretically exact value shown without tolerances.

See ASME Y14.5M

Drawing No. C04-116

dsPIC30F6011/6012/6013/6014

NOTES:

dsPIC30F6011/6012/6013/6014

APPENDIX A: REVISION HISTORY

Revision F (Novembe r 2006)

Previous versions of this data sheet contained

Advance or Prelimina ry Information . They were di stri b-

uted with incom pl ete charac terization dat a .

Revision F of this document reflects the following

updates:

• Supported I2C Slave Addresses

(see Table 15-1)

• ADC Conversion Clock selection to allow 200 kHz

sampling rate (see Section 19.0 “12-bit Analog-

to-Digital Converter (A/D) Module”)

• Operating Current (Idd) Specifications

(see Table 23-5)

• BOR voltage limits

(see Table 23-11)

• I/O pin Input Specifications

(see Table 23-8)

• Watchdo g Timer time-out li mits

(see Table 23-21)

dsPIC30F6011/6012/6013/6014

NOTES:

© 2006 Microchip Technology Inc. DS70143C-page 217
dsPIC30F6011A/6012A/6013A/6014A
INDEX
A
A/D....................................................................................135
Aborti n g  a  Conver sion .......... ..................... ...............137
ADCHS Register.......................................................135
ADCON1 Register.....................................................135
ADCON2 Register.....................................................135
ADCON3 Register.....................................................135
ADCSSL Register.....................................................135
ADPCFG Register.....................................................135
Configuring Analog Port Pins..............................64, 143
Connection Considerations................................... .. ..143
Conversi o n  Op eration..... ..................... .....................136
Effects of a Reset......................................................142
Operation During CPU Idle Mode.............................142
Operation During CPU Sleep Mode..........................142
Output Fo rmats....... .............. ............................ ........142
Power-down Modes..................................................142
Programming the Sample Trigger.............................137
Register Map..................... ..................... ...................144
Result Buffer............... ........................... ...................136
Sampling Requirements....................... .... .. .. ....... .. ....141
Selecting the Conversion Sequence.........................136
AC Characteristics ............................................................182
Load Conditions...................... ....... .. .. .. .. .. .. ....... .. .. .. ..182
AC Temperature and Voltage Specifications....................182
AC-Link Mode Operation ............................. .. .. .... ..... .... .. ..132
16-bit Mode...............................................................132
20-bit Mode...............................................................132
ADCSele c t i n g  th e  C o n ve r sion C l o ck...... ...... ...... ..... ...... .. .1 3 7
ADC Conversion Speeds..................................................138
Address Generator Units ....................................................39
Alternate Vector Table........................................................49
Analog-to-Digital Converter. See A/D.
Assembler
MPASM Assembler...................................................170
Automatic Clock Stretch ......................................................98
During 10-bit Addressing (STREN = 1).......................98
During 7-bit Addressing (STREN = 1).........................98
Receive Mode.............................................................98
Transmit Mode...... ........................... ..................... ......98
B
Band Gap Start-up Time
Requirements............................................................188
Timing Cha racterist ics ..................... ..................... ....188
Barrel Shifter.......................................................................23
Bit-Reversed Addre ssing........ ........................... .................42
Example......................................................................43
Implementation ...........................................................42
Modifier Values Tab l e..... .................................. ..........43
Sequence Table (16-Entry)....................................... ..43
Block Diagrams
12-bit A/D Functional ................................................135
16-bit Timer1 Module..................................................70
16-bit Timer2...............................................................75
16-bit Timer3...............................................................75
16-bit Timer4...............................................................80
16-bit Timer5...............................................................80
32-bit Timer2/3 ............................................................74
32-bit Timer4/5 ............................................................79
CAN Buffers and Protocol Engine.............................112
DCI Module....................... .. .. .. ..... .... .. .. .. .. .. .. ..... .. .. .. ..126
Dedica te d  Po rt Structu re ......... ................................. .. 63
DSP Engine.. ........................... ........................... ........ 20
dsPIC30F6011/6012/6013/6014................................. 10
dsPIC30F6013/6014................................................... 11
External Power-on Reset Circuit .............................. 153
I2C .............................................................................. 96
Input Capture Mode.................................................... 83
Oscillat o r Sys tem.... ............... .............. ............... ...... 147
Output Com p a re Mode........ ........................... ............ 87
Reset System.................... ........................... ............ 151
Shared Po rt Structure........ ................................. ........ 64
SPI.............................................................................. 92
SPI Master/Slave Connection . .................................... 92
UART Receiver ......................................................... 104
UART Transmitter..................................................... 103
BOR Characteristics......................................................... 181
BOR. See Brown-out Reset.
Brown-out Reset
Characteristics.......................................................... 180
Timing Re q uirements .......... ..................... ................ 187
C
C Compilers
MPLAB C18........ ........................... ..................... ...... 170
MPLAB C30........ ........................... ..................... ...... 170
CAN Module ..................... .. .... ....... .. .... .. .... .. ....... .... .. .... .. .. 111
Baud Rate Setting .................................................... 116
CAN1 Registe r  Map.... ............... ..................... .......... 118
Frame Types ............................................................ 111
I/O Timin g  Chara cteristics............. ..................... ...... 205
I/O Timing Requirements.................................... .... .. 205
Message Reception.................................................. 114
Message Transmission............................................. 115
Modes of Ope ration...... ............... ..................... ........ 113
Overview................................................................... 111
CLKO and I/O Timing
Characteristics.......................................................... 186
Requirements........................................................... 186
Code Examples
Data EEPRO M Block Erase......................... .............. 58
Data EEPRO M Block Write..... ..................... .............. 60
Data EEPRO M Read...... ............... ........................... .. 57
Data EEP RO M Word Er a se ...... ........................... ...... 58
Data EEPRO M Word Write .......................... .............. 59
Erasing a Row of Program Memory ........................... 53
Initiating a Programming Sequence ........................... 54
Loading Write Latches............. .. .. .... .. .. ..... .. .... .. .. .. .. .. .. 54
Code Protection................................................................ 145
Core Architecture
Overview..................................................................... 15
CPU Archit e ct u re Overview................. ..................... .......... 15
Customer Change Notification Service............................. 223
Custome r Notification Ser vice ..... ..................... .............. .. 223
Customer Support............................ ...... .... ........... .... .... .... 223

dsPIC30F6011A/6012A/6013A/6014A
DS70143C-page 218 © 2006 Microchip Technology Inc.
D
Data Accumulators and Adder/Subtractor...........................21
Data Space Write Saturation ........................... ...........23
Overflow and Saturation ............................ .... .... .........21
Round Logic................................................................22
Write Back...................................................................22
Data Address Space...........................................................31
Alignment....................................................................34
Alignment (Figure) ......................................................35
Effect of Invalid Memory Accesses (Table) .................34
MCU and DSP (MAC Class) Instructions Example.....34
Memory Map...............................................................31
Memory Map for dsPIC30F6011/6013........................32
Memory Map for dsPIC30F6012/6014........................33
Near Data Space ........................................................35
Softwa re Stack............................ ............................ ....35
Spaces........................................................................31
Width...........................................................................34
Data Converter Interface (DCI) Module ............................125
Data EEPROM Memory......................................................57
Erasing........................................................................58
Erasing, Block.............................................................58
Erasing, Word.............................................................58
Protection Agains t S pur io u s Write ..............................61
Reading.......................................................................57
Write Verify .................................................................61
Writing.........................................................................59
Writing , Block........................ ........................... ...........60
Writing , Wo rd ................ ..................... ..................... ....59
DC Characteristics............................................................173
BOR..........................................................................181
Brown-out Reset.......................................................180
I/O Pin Input Specifications.......................................178
I/O Pin Output Specifications....................................179
Idle Current (IIDLE) ....................................................176
Low-Voltage Detect...................................................179
LVDL.........................................................................180
Operating Current (IDD).............................................175
Power-Down Current (IPD)........................................177
Program and EEPROM.............................................181
DCI Module
Bit Clock Generator...................................................129
Buffer Alignment with Data Frames ..........................131
Buffe r Con trol...................... ........................... ...........125
Buffe r Data  Alignment......... ..................... .................125
Buffer Length Control.................... ....... .... .. .. .... .. .......131
COFS Pin....... ........................... ..................... ...........125
CSCK Pin............. ..................... ..................... ...........125
CSDI Pin...... .............. ............... ..................... ...........125
CSDO Mode Bit ........................................................132
CSDO Pin .................................................................125
Data Justification Control Bit.....................................130
Device Frequencies for Common Codec 
CSCK Frequencies (Table)...............................129
Digital Loopback Mode ...................................... .. .....132
Enable.......................................................................127
Frame Sync Generator .............................................127
Frame Sync Mode Control Bits.................................127
I/O Pi n s............................... ........................... ...........125
Interrupts...................................................................132
Introduction ...............................................................125
Master Frame Sync Operation..................................127
Operation ..................................................................127
Operation During CPU Idle Mode.............................132
Operation During CPU Sleep Mode..........................132
Receive Slot Enable Bits .... .. ....... .... .. .... .. .. ....... .... .. .. 130
Receive St a tu s Bits................. ..................... ............. 131
Register Map ...................... ..................... ................. 134
Sample Clock Edge Control Bit ............... .... ....... .. .... 130
Slave Fra me Sync Operat io n.. ............... ................... 12 8
Slot Enable Bits Operation with Frame Sync . ........... 130
Slot St a tus Bits .......................................... ...............132
Synchronous Data Transfers.................................... 130
Timing Characteristics
AC-Li n k Mode............. ............................ .......... 195
Multichannel, I2S Modes.................. .. .. ..... .. .... .. 193
Timing Requirements
AC-Li n k Mode............. ............................ .......... 195
Multichannel, I2S Modes.................. .. .. ..... .. .... .. 194
Transmit Slot Enable Bits ......................................... 130
Transmit Status Bits.................................................. 131
Transmit/Receive Shift Register............................... 125
Underflow Mode Control Bit....................... ....... .... .. ..132
Word Size Selection Bits.......................................... 127
Development Support....................................................... 169
Device Configuration
Register Map ...................... ..................... ................. 159
Device Configuration Registers
FBORPOR................................................................ 157
FGS .......................................................................... 157
FOSC........................................................................ 157
FWDT ....................................................................... 157
Device Overview................................................................... 9
Disabling th e  UART........ .............. ............... ............... ...... 105
Divide Support ..................................... .... .. .... .. .... ....... .. .... .. 18
Instructions (Tabl e ).......................... ........................... 18
DSP Engine.................. ........................... ........................... 19
Multiplier ..................................................................... 21
Dual Output Compare Match Mode................... ............... ..88
Continuous Pulse Mode......................... .. .... ....... .. .... .. 88
Single Pulse Mode...................................................... 88
E
Electrical Characteristics .................................................. 173
AC............................................................................. 182
DC ............................................................................ 173
Enabling and Setting Up UART
Setting Up Data, Parity and Stop Bit Selections....... 105
Enabling the UART........................................................... 105
Equations
ADC Convers io n  Cl o ck.............. ..................... .......... 137
Baud Rate................................................................. 107
Bit Clock Frequency................................... ............. .. 129
COFSG Perio d ........................... ........................... .... 127
Serial Clock Rate...................................................... 100
Time Quantum for Clock Generation...................... .. 117
Errata.................................................................................... 8
External Clock Timing Characteristics
Type A, B and C Timer............................................. 189
Exter n a l  C l o c k Timi n g  Re quireme n t s ....... ...... ......... ...... ... 1 8 3
Type A Timer............................................................ 189
Type B Timer............................................................ 190
Type C Timer............................................................ 190
External Interrupt Requests................................................ 49

© 2006 Microchip Technology Inc. DS70143C-page 219
dsPIC30F6011A/6012A/6013A/6014A
F
Fast Context Saving............................................................49
Flash Pr o g ram Memory ....................................... ...............51
Control Reg isters....................... .............. ............... ....52
NVMADR ............................................................52
NVMADRU..........................................................52
NVMCON............................................................52
NVMKEY.............................................................52
I
I/O Pin Specifications
Input..........................................................................178
Output.......................................................................179
I/O Ports........... ........................... ............................ ............63
Paral l e l  (P IO) ..... ............................ ........................... ..63
I2C 10-bit Slave Mode Operation........................................97
Reception....................................................................98
Transmission...............................................................97
I2C 7-bit Slave Mode Operation..........................................97
Reception....................................................................97
Transmission...............................................................97
I2C Master Mode Operation................................................99
Baud Rate Generator................................................100
Clock Arbitration........................................................100
Multi-Master Communication, Bus Collision 
and Bus Arbitration . .... .... ........... ...... .... .............100
Reception....................................................................99
Transmission...............................................................99
I2C Master Mode Support ...................................................99
I2C Module..........................................................................95
Addresses...................................................................97
Bus Data Timing Characteristics
Master Mode.....................................................201
Slave Mode.......................................................203
Bus Data Timing Requirements
Master Mode.....................................................202
Slave Mode.......................................................203
Bus Start/Stop Bits Timing Characteristics
Master Mode.....................................................201
Slave Mode.......................................................203
General Call Address Support.. ..................................99
Interrupts.....................................................................98
IPMI Support.............................................. ............... ..99
Operating Function Description ..................................95
Operation During CPU Sleep and Idle Modes..........100
Pin Configuration ........................................................95
Programmer’s Model...................................................95
Register Map..................... ..................... ...................101
Registers.....................................................................95
Slope Control..............................................................99
Software Controlled Clock Stretching (STREN = 1)....98
Various Modes...................... .. ......... .... .. .... .. ......... .... ..95
I2S Mode Operation..........................................................133
Data Just ification....... ..................... .............. .............133
Frame and Data Word Length Selection...................133
Idle Current (IIDLE) ............................................................176
In-Circuit Serial Programming (ICSP).........................51, 145
Input Capture (CAPX) Timing Characteristics ..................191
Input Capture Module ............... .. .... ..... .... .. .. .... .. .. ....... .. .... ..83
Interrupts.....................................................................84
Register Map..................... ..................... .....................85
Input Capture Operation During Sleep and Idle Modes......84
CPU Idle Mode............................................................84
CPU Sleep Mode........................................................84
Input Capture Timing Requirements.................................191
Input Change Notification Module....................................... 67
Register Map for dsPIC30F6011/6012 (Bits 15-8) ..... 67
Register Map for dsPIC30F6011/6012 (Bits 7-0) ....... 67
Register Map for dsPIC30F6013/6014 (Bits 15-8) ..... 67
Register Map for dsPIC30F6013/6014 (Bits 7-0) ....... 67
Instruction Addressing Modes ............................................ 39
File Register Instructions............................................ 39
Fundamental Modes Supported................................. 39
MAC Instru ctions......................... ..................... .......... 40
MCU Instru ctions............................... ..................... .... 39
Move and Accumulator Instructions ........................... 40
Other Ins tructio n s.............. ........................... .............. 40
Instruction Set
Overview................................................................... 164
Summary.................................................................. 161
Inter n e t Ad d ress ... ........................... ........................... ...... 223
Interrupt Controller
Register Map........................... ..................... .............. 50
Interrupt Priority.................................................................. 46
Interrupt Sequence............................................................. 48
Interrupt Stack Frame................................................. 49
Interrupts ............................................................................ 45
L
Load Conditions................................................................ 182
Low Volta g e Detec t (LVD)...... ..................... ............... ...... 156
Low-Voltage Detect Characteristics.................................. 179
LVDL Charact e ristics................. .............. ..................... .... 180
M
Memory Organization ......................................................... 25
Core Register Map ..................................................... 35
Microc h i p  In te rnet Web Site.............................. ................ 223
Modes of Operation
Disable...................................................................... 113
Initialization............................................................... 113
Listen All Messages...................................... .... .. .... .. 113
Listen On ly.......... ........................... ..................... ...... 113
Loopback.................................................................. 113
Normal Operation........... ............... ..................... ...... 113
Modulo Addressing............................................................. 40
Applicability................................................................. 42
Operation Example..................................................... 41
Start and End Address ............................................... 41
W Addres s Reg ister Selection....... ............... .............. 41
MPLAB ASM30 Assembler, L i n ker, Librar ia n................... 170
MPLAB ICD 2 In-Circuit Debugger................................... 171
MPLAB ICE 2000 High-Perf orm ance Univers a l 
In-Circuit Emulator.................................................... 171
MPLAB Integrated Development Environment Software.. 169
MPLAB PM3 Device Programmer.................................... 171
MPLAB REA L  IC E In -Circuit Em u l a to r System ................ 171
MPL IN K Obje ct Linker/ M PLIB Ob j e ct Libra r i a n..... ...... ..... 170
N
NVMRegister Map........................... ..................... .............. 55

dsPIC30F6011A/6012A/6013A/6014A
DS70143C-page 220 © 2006 Microchip Technology Inc.
O
OC/PWM Module Timing Characteristics..........................192
Operating Current (IDD).....................................................175
Oscillator
Configurations...........................................................148
Fail-Safe Clock Monitor.....................................149
Fast RC (FRC)..................................................149
Initial Clock Source Selection ...........................148
Low Power RC (LPRC).....................................149
LP Oscillator Control.........................................148
Phase Locked Loop (PLL) ................................149
Start- u p  Timer (OST)....... .................... .............148
Operating Modes (Table)..........................................146
Syste m Over view............ ........................... ...............145
Oscillator Selection ...........................................................145
Oscillator Start-up Timer
Timing Cha racterist ic s ............ ............... .............. .....187
Timing Requirements................ .... .. ..... .... .. .. .. .... .. .....187
Output Co mpa re Interrup ts ............... ..................... .............89
Output Compare Module..................... .... ..... .... .. .... .. .. ....... ..87
Register Map........................... ..................... ...............90
Timing Cha racterist ic s ............ ............... .............. .....191
Timing Requirements................ .... .. ..... .... .. .. .. .... .. .....191
Output Compare Operation During CPU Idle Mode............89
Output Compare Sleep Mode Operation.............................89
P
Packagi n g  In formation ....... ..................... ..................... .....211
Marking.....................................................................211
Peripheral Module Disable (PMD) Registers ....................158
PICSTART Plus Developm ent Programm er .....................172
Pinout Descriptions........................... .. .... ....... .. .. .... .. .... .......12
PLL Clock Timing Specifications.......................................184
POR. See Power-on Reset.
PORTA
Register Map for dsPIC30F6013/6014 .......................65
PORTB
Register Map for dsPIC30F6011/6012/6013/6014 .....65
PORTC
Register Map for dsPIC30F6011/6012 .......................65
Register Map for dsPIC30F6013/6014 .......................65
PORTD
Register Map for dsPIC30F6011/6012 .......................66
Register Map for dsPIC30F6013/6014 .......................66
PORTF
Register Map for dsPIC30F6011/6012 .......................66
Register Map for dsPIC30F6013/6014 .......................66
PORTG
Register Map for dsPIC30F6011/6012/6013/6014 .....66
Power Saving Modes...................... .. .... .. ....... .... .. .... .. .......156
Idle............................................................................157
Sleep.........................................................................156
Sleep and Idle...........................................................145
Power-Down Current (IPD)................................................177
Power-up Timer
Timing Cha racterist ic s ............ ............... .............. .....187
Timing Requirements................ .... .. ..... .... .. .. .. .... .. .....187
Program Address Space..................................................... 25
Construction ............................................................... 27
Data Access from Program Memory 
Using Program Space Visibility .......................... 29
Data Access from Program Memory Using 
Table Ins tructio n s.................... ..................... ...... 28
Data Acce ss from, Address Gener a tion .. ............... .... 27
Data Space Window into Operation............................ 30
Data Table Access (LS Word)......... ..................... ...... 28
Data Table  Ac cess (MS Byte).................... ................. 29
Memory Map for dsPIC30F6011/6013........................ 26
Memory Map for dsPIC30F6012/6014........................ 26
Table Instructions
TBLRDH............................................................. 28
TBLRDL.............................................................. 28
TBLWTH............................................................. 28
TBLWTL ............................................................. 28
Program and EEPRO M Charac terist ics................. ........... 181
Program Counter ................................................................ 16
Programmable.................................................................. 145
Programm er’s Model .......................................................... 16
Diagram...................................................................... 17
Programming Operations.......... ..................... ..................... 53
Algor ith m for Program Flas h........ ........................... .... 53
Erasing a Row of Program Memory............................ 53
Initiating the Programming Sequence......................... 54
Loading Write Latches................... .... .. .. .. .. .. ....... .. .. .. .. 54
Protection Against Accidental Writes to OSCCON........... 150
R
Reader Response............................................................. 224
Reset ........................................................................ 145, 151
BOR, Programmable................................. ............... 153
Brown-o ut Re set (BOR)............... ..................... ........ 145
Oscillato r Start-up Timer (OST)........................ ........ 145
POROperating without FSCM and PWRT................ 153
With Long Crystal Start-up Time ...................... 153
POR (Power-on Reset)............................................. 151
Power-on Reset (POR)............................................. 145
Power-up Timer (PWRT).......................................... 145
Reset Sequence ..................... .... .... ....... .... .. .... .... ....... .... .... 47
Reset Sources...... ..................... ..................... ............ 47
Reset Sources
Brown-o u t Re set (BOR)............... .............. ................. 47
Illegal Instruction Trap ............................. .... ........... .... 47
Trap Lock o u t.................................. ..................... ........ 47
Uninitialized W Register Trap..................................... 47
Watchdog Time-out ..................... .. .... .. .... .. .. ....... .... .. .. 47
Reset Timi ng  Char a ct e ristics............. .............. ............... .. 187
Reset Timing Requirements............................ .... ....... .. .... 187
RTSP Operatio n............... ..................... ..................... ........ 52
Run-Time Self-Programming (RTSP)................................. 51

© 2006 Microchip Technology Inc. DS70143C-page 221
dsPIC30F6011A/6012A/6013A/6014A
S
Serial Peripheral Interface. See SPI.
Simpl e  Capture Event Mode................................ ...............83
Buffe r Ope ration...... ........................... ..................... ....84
Hall Sensor  Mode ....... ........ ............... ............... ..........84
Prescaler.....................................................................83
Timer2 and Timer3 Selection Mode........... ......... .. .... ..84
Simple OC/PWM Mode Timing Requirements..................192
Simple Output Compare Match Mode .................................88
Simple PWM Mode.............................................................88
Input Pin Fault Protection........................... .. ....... .... .. ..88
Period..........................................................................89
Softwa re Simulator (MP L AB SIM).................... .................170
Software Stack Pointer, Frame Pointer...............................16
Call Stack Fra me ....................... .............. ............... ....35
SPI......................................................................................91
SPI Module .........................................................................91
Framed SPI Support...................................................91
Operating Function Description ..................................91
Operation During CPU Idle Mode...............................93
Operation During CPU Sleep Mode............................93
SDOx Disable .............................................................91
Slave Select Synchronization .....................................93
SPI1 Register Map......................................................94
SPI2 Register Map......................................................94
Timing Characteristics
Master Mode (CKE = 0)....................................196
Master Mode (CKE = 1)....................................197
Slave Mode (CKE = 1)..............................198, 200
Timing Requirements
Master Mode (CKE = 0)....................................196
Master Mode (CKE = 1)....................................198
Slave Mode (CKE = 0)......................................199
Slave Mode (CKE = 1)......................................200
Word and Byte Communication ..................................91
Status Bits, Their Significance and the Initialization 
Condition for RCON Register, Case 1......................154
Status Bits, Their Significance and the Initialization 
Condition for RCON Register, Case 2......................155
Statu s Reg i ster ............... ..................... ..................... ..........16
Symbols Used in Opcode Descriptions.............................162
Syste m Inte g ration........ ..................... ..................... ..........145
Register Map..................... ..................... ...................159
T
Table Instruction Operation Summary................................51
Temperature and Voltage Specifications
AC.............................................................................182
Timer1 Module....................................................................69
16-bit Asynchronous Counter Mode ...........................69
16-bit Synchronous Counter Mode.............................69
16-bit Timer Mode.......................................................69
Gate Operation ...........................................................70
Interrupt.......................................................................71
Operation During Sleep Mode ....................................70
Prescaler.....................................................................70
Real-Time Clock .........................................................71
Interrupts.............................................................71
Oscillator Operation............................................71
Register Map..................... ..................... .....................72
Timer2 and Timer3 Selection Mode................... .. ......... .. ....88
Timer2/3 Module.................................. .. .. .... ....... .. .. .... .. .... .. 73
16-bit Timer Mode .... ..................... ..................... ........ 73
32-bit Synchronous Counter Mode............................. 73
32-bit Timer Mode .... ..................... ..................... ........ 73
ADC Event Trigger ..................................... .... .... .... .... 76
Gate Operation........................................................... 76
Interrupt...................................................................... 76
Operation During Sleep Mode.................................... 76
Register Map........................... ..................... .............. 77
Timer Prescaler.......................................................... 76
Timer4/5 Module.................................. .. .. .... ....... .. .. .... .. .... .. 79
Register Map........................... ..................... .............. 81
Timing Characteristics
A/D Conversion
Low-speed (ASAM = 0, SSRC = 000).............. 208
Band Gap Start-up Time........................................... 188
CAN Module I/O ........................ .. .... .. ....... .... .. .... .. .... 205
CLKO and I/O........................................................... 186
DCI Module
AC-Li nk Mod e....... ..................... ....................... 195
Multichannel, I2S Modes................................... 193
External Clock .......................................................... 182
I2C Bus Data
Master Mode.............................. ....... .. .... .. .... .. .. 201
Slave Mode .... ..................... ........................... .. 203
I2C Bus Start/Stop Bits
Master Mode.............................. ....... .. .... .. .... .. .. 201
Slave Mode .... ..................... ........................... .. 203
Input Capture (CAPX)............................................... 191
OC/PWM Module . ..................................................... 192
Oscillator Start-up Timer...... ..................................... 187
Output Com p a re Module............. ..................... ........ 191
Power-up Timer........................................................ 187
Reset........................................................................ 187
SPI Module
Master Mode (CKE = 0)........................ .. .... .. .. .. 196
Master Mode (CKE = 1)........................ .. .... .. .. .. 197
Slave Mode (CKE = 0)...................................... 198
Slave Mode (CKE = 1)...................................... 200
Type A, B and C Timer External Clock. .................... 189
Watchdog Timer ... .. .. .... .. ....... .. .... .. .... .. ....... .. .... .. .... .. 187
Timing Diagrams
CAN Bit......... .............. ............................ .................. 116
Frame Sync, AC-Link Start of Frame ....................... 128
Frame Sync, Multi-Channel Mode............................ 128
I2S Interface Frame Sync......................................... 128
PWM Output... ..................... ........................... ............ 89
Time-out Sequence on Power-up (MCLR 
Not Tied to VDD), Case 1.................................. 152
Time-out Sequence on Power-up (MCLR 
Not Tied to VDD), Case 2.................................. 152
Time-out Sequence on Power-up (MCLR 
Tied to VDD)...................................................... 152
Timing Diagrams.See Timing Characteristics

dsPIC30F6011A/6012A/6013A/6014A
DS70143C-page 222 © 2006 Microchip Technology Inc.
Timing Requirements
Band Gap Start-up Time...........................................188
Brown-out Reset.......................................................187
CAN Module I/O........................................................205
CLKO and I/O ...........................................................186
DCI Module
AC-Li n k Mode............. ..................... .................195
Multichannel, I2S Modes...................................194
External Clock...........................................................183
I2C Bus Data (Master Mode).....................................202
I2C Bus Data (Slave Mode).......................................203
Input Capture ..... .... .. ....... .... .. .. .... .. ....... .. .... .. .... .. .. .....191
Oscillator Start-up Timer...........................................187
Output Compare Module.............................. .. .. .... .....191
Power-up  Timer .................. ..................... .................187
Reset.........................................................................187
Simple OC/PWM Mode.............................................192
SPI Module
Master Mode (CKE = 0)....................................196
Master Mode (CKE = 1)....................................198
Slave Mode (CKE = 0)......................................199
Slave Mode (CKE = 1)......................................200
Type A Time r Ex ternal Clock................... .................189
Type B Time r Ex ternal Clock................... .................190
Type C Timer Ext e rnal Clock................... .................190
Watchdog Timer.................... .. .... .. ....... .. .... .. .... .. .. .....187
Timing Specifications
PLL Clock..................................................................184
Trap Vec to rs......... ..................... ........................... ...............48
Traps...................................................................................47
Hard and Soft..............................................................48
Sources.......................................................................47
Address Error Trap .............................................47
Math Error Trap............................ .......................47
Oscillator Fail Trap..............................................48
Stack Error Trap..................................................48
U
UART Module
Address Detect Mode............................................... 107
Auto Baud Support ......... .... .... ......... .... .... .... ......... .... 108
Baud Rate Generator ............................................... 107
Enabling and Setting Up.......................... .. .. ....... .. .. .. 105
Framing Error (FERR) .............................................. 107
Idle Status ................................................................. 107
Loopback Mode.................... .. ....... .. .... .. .. .... ....... .. .. .. 107
Operation During CPU Sleep and Idle Modes.......... 108
Overview................................................................... 103
Parity Error (PERR).................................................. 107
Receive Bre a k........................ ..................... ............. 107
Receive Buffer (UxRXB)..... ..................... ................. 106
Receive Buf fe r Overrun Erro r ( OERR Bit)........ ........ 10 6
Receive Interrupt.................... ..................... ............. 106
Receiving Data ......................................................... 106
Receiving  in 8-bit or 9-bit Data Mode............... ........ 106
Reception  Er ror Handling ...................... ................... 106
Transmit Break......................................................... 106
Transmit Buffer (UxTXB).......................................... 105
Transmit Interrupt ..................................................... 106
Transmitting Data..................................................... 105
Transmitting in 8-bit Data Mode................................ 105
Transmitting in 9-bit Data Mode................................ 105
UART1 Register Map................................................ 109
UART2 Register Map................................................ 109
UART Operation
Idle Mode.................................................................. 108
Sleep Mode .............................................................. 108
Unit ID Locations .............................................................. 145
Universal Asynchronous Receiver Transmitter. See UART.
W
Wake-up from Sleep......................................................... 145
Wake-up from Sleep and Idle............................................. 49
Watchdog Timer
Timing Ch a rac te ristics........ ..................... ................. 187
Timing Re q uirements.. ..................... ..................... .... 187
Watchdog Timer (WDT).............. .... ....... .... .. .... .. ....... 145, 156
Enabling and Disabling............................................. 156
Operation.................................................................. 156
WWW Addres s .......................................... ....................... 223
WWW, On-Line Support....................................................... 8

dsPIC30F6011/6012/6013/6014

THE MICROCHIP WEB SITE

Microc hip pro vides onl ine s upport v ia our W WW site at

www.microchip.c om . Thi s web si te i s us ed as a m ean s

to make files and information easily available to

customers. Accessible by using your favorite Internet

browser, the web site contains the following

information:

•Product Support – Data sheets and errata,

application notes and sample programs, design

resources, user’s guides and hardware support

docume nts , latest softw are releas es and archived

software

•General Technical Support – Frequently Asked

Questions (FAQ), technical support requests,

online dis cu ss io n gr oups, Micro chip con sul tant

program member listing

•Business of Microchip – Product selector and

ordering guides, latest Microchip press releases,

listing of seminars and even ts, listin gs of

Microchip sales offices, distributors and factory

representatives

CUSTOMER CHANGE NOTIFICATION

SERVICE

Microchip’s customer notification service helps keep

customers current on Microchip products. Subscribers

will receive e-mail notification whenever there are

changes, updates, revisions or errata related to a

specif ied produ ct family or develo pment tool of interes t.

To register, access the Microchip web site at

www.microchip.com, click on Customer Change

Notification and follow the registration instructions.

CUSTOMER SUPPORT

Users of Microchip products can receive assistance

through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

Customers should contact their distributor,

representative or field application engineer (FAE) for

support. Local sales offices are also available to help

customers. A listing of sales offices and locations is

included in the back of this document.

Technical suppo rt is avail able throug h the we b site

at: http://support.microchip.com

dsPIC30F6011/6012/6013/6014

READER RESPONSE

It is ou r intention to provide you w it h th e b es t documentation po ss ible to ens ure suc c es sfu l u se of y ou r M ic r oc hip pro d-

uct. If you wi sh to prov ide you r comment s on org anizatio n, clar ity, subject matter, and ways in whic h our doc umenta tion

can better serve you, please FAX your comments to the Technical Publications Manager at (480) 792-4150.

Please list the following information, and use this outline to provide us with your comments about this document.

To: Technical Publications Manager

RE: Reader Response Total Pages Sent ________

From: Name

Company

Address

City / State / ZIP / Country

Telephone: (_______) _________ - _________

Application (optional):

Would you like a reply? Y N

Device: Literature Number:

Questions:

FAX: (______) _________ - _________

DS70117FdsPIC30F6011/6012/6013/6014

1. W hat ar e the best feat ures of this document?

2. How does this document meet your hardware and software development needs?

3. Do you find the organization of this document easy to follow? If not, why?

4. What additions to the document do you think would enhance the structure and subject?

5. What deletions from the document could be made without affecting the overall usefulness?

6. Is there any incorrect or misleading information (what and where)?

7. How would you improve this document?

dsPIC30F6011/6012/6013/6014

PRODUCT IDENTIFICATION SYSTEM

To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.

dsPIC30F6011AT-30I/PF-ES

Example:

dsPIC30F6011AT-30I/PF = 30 MIPS, Industrial temp., TQFP package, Rev. A

Trademark

Architecture

Flash

E = Extended High Temp -40°C to +125°C

I = Industrial -40°C to +85°C

Temperature

Device ID

Package

PF = TQFP 14x14

S = Die (Waffle Pack)

W = Die (Wafers)

Memory Size in Bytes

0 = ROMless

1 = 1K to 6K

2 = 7K to 12K

3 = 13K to 24K

4 = 25K to 48K

5 = 49K to 96K

6 = 97K to 192K

7 = 193K to 384K

8 = 385K to 768K

9 = 769K and Up

Custom ID (3 digits) or

T = Tape and Reel

A,B,C… = Revision Level

Engineering Sample (ES)

Speed

20 = 20 MIPS

30 = 30 MIPS

AMERICAS

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7200

Fax: 480-792-7277

Technical Support:

http://support.microchip.com

Web Address:

www.microchip.com

Atlanta

Alpharetta, GA

Tel: 770-640-0034

Fax: 770-640-0307

Boston

Westborough, MA

Tel: 774-760-0087

Fax: 774-760-0088

Chicago

Itasc a , IL

Tel: 630-285-0071

Fax: 630-285-0075

Dallas

Addison, TX

Tel: 972-818-7423

Fax: 972-818-2924

Detroit

Farmington Hills, MI

Tel: 248-538-2250

Fax: 248-538-2260

Kokomo

Kokomo, IN

Tel: 765-864-8360

Fax: 765-864-8387

Los A n ge les

Mission Viejo, CA

Tel: 949-462-9523

Fax: 949-462-9608

Santa Clara

Santa Clara, CA

Tel: 408-961-6444

Fax: 408-961-6445

Toronto

Mississauga, Ontario,

Canada

Tel: 905-673-0699

Fax: 905-673-6509

ASIA/PACIFIC

Asia Pacific Office

Suites 3707-14, 37th Floor

Tower 6, The Gateway

Habour City, Kowloon

Hong Kong

Tel: 852-2401-1200

Fax: 852-2401-3431

Australia - Sydney

Tel: 61-2-9868-6733

Fax: 61-2-9868-6755

China - Beijing

Tel: 86-10-8528-2100

Fax: 86-10-8528-2104

China - Chengdu

Tel: 86-28-8665-5511

Fax: 86-28-8665-7889

China - Fuzhou

Tel: 86-591-8750-3506

Fax: 86-591-8750-3521

China - Hong Kong SAR

Tel: 852-2401-1200

Fax: 852-2401-3431

China - Qingdao

Tel: 86-532-8502-7355

Fax: 86-532-8502-7205

China - Shanghai

Tel: 86-21-5407-5533

Fax: 86-21-5407-5066

China - Shenyang

Tel: 86-24-2334-2829

Fax: 86-24-2334-2393

China - Shenzhen

Tel: 86-755-8203-2660

Fax: 86-755-8203-1760

China - Shunde

Tel: 86-757-2839-5507

Fax: 86-757-2839-5571

China - Wuhan

Tel: 86-27-5980-5300

Fax: 86-27-5980-5118

China - Xian

Tel: 86-29-8833-7250

Fax: 86-29-8833-7256

ASIA/PACIFIC

India - Bangalore

Tel: 91-80-4182-8400

Fax: 91-80-4182-8422

India - New Delhi

Tel: 91-11-4160-8631

Fax: 91-11-4160-8632

India - Pune

Tel: 91-20-2566-1512

Fax: 91-20-2566-1513

Japan - Yokohama

Tel: 81-45-471- 6166

Fax: 81-45-471-6122

Korea - Gumi

Tel: 82-54-473-4301

Fax: 82-54-473-4302

Korea - Seoul

Tel: 82-2-554-7200

Fax: 82-2-558-5932 or

82-2-558-5934

Malaysia - Penang

Tel: 60-4-646-8870

Fax: 60-4-646-5086

Philippines - Manila

Tel: 63-2-634-9065

Fax: 63-2-634-9069

Singapore

Tel: 65-6334-8870

Fax: 65-6334-8850

Taiwan - Hsin Chu

Tel: 886-3-572-9526

Fax: 886-3-572-6459

Taiwan - Kaohsiung

Tel: 886-7-536-4818

Fax: 886-7-536-4803

Taiwan - T aipei

Tel: 886-2-2500-6610

Fax: 886-2-2508-0102

Thail a nd - Bangkok

Tel: 66-2-694-1351

Fax: 66-2-694-1350

EUROPE

Austria - Wels

Tel: 43-7242-2244-39

Fax: 43-7242-2244-393

Denmark - Copenhage n

Tel: 45-4450-2828

Fax: 45-4485-2829

France - Paris

Tel: 33-1-69-53-63-20

Fax: 33-1-69-30-90-79

Germany - Munich

Tel: 49-89-627-144-0

Fax: 49-89-627-14 4-44

Italy - Milan

Tel: 39-0331-742611

Fax: 39-0331-466781

Netherlands - Drunen

Tel: 31-416-690399

Fax: 31-416-690340

Sp ain - Madrid

Tel: 34-91-708-08-90

Fax: 34-91-708-08 -91

UK - Wokingham

Tel: 44-118-921- 5869

Fax: 44-118-921-5820

WORLDWIDE SALES AND SERVICE

10/19/06