CPH3239
No.7723-1/4
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN7723A
22004 TS IM / D0503 TS IM TA-100852
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
CPH3239 NPN Epitaxial Planar Silicon Transistors
DC / DC Converter Applications
Applications
•Relay drivers, lamp drivers, motor drivers, flash.
Features
•Adoption of MBIT process.
•High current capacitance.
•Low collector-to-emitter saturation voltage.
•High speed switching.
•Narrow hFE range.
•Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm).
•High allowable power dissipation.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage VCBO 100 V
Collector-to-Emitter Voltage VCES 100 V
Collector-to-Emitter Voltage VCEO 50 V
Emitter-to-Base Voltage VEBO 6V
Collector Current IC5A
Collector Current (Pulse) ICP 7A
Base Current IB1.2 A
Collector Dissipation PCMounted on a ceramic board (600mm2✕0.8mm) 0.9 W
Junction Temperature Tj 150 °C
Storage Temperature Tstg --55 to +150 °C
CPH3239
No.7723-2/4
++
50Ω
INPUT OUTPUT
VR
RBRL
VCC=25V
100µF 470µF
VBE= --5V
PW=20µsIB1
IB2
D.C.≤1%
IC= --20IB1= 20IB2=2.5A
1 : Base
2 : Emitter
3 : Collector
SANYO : CPH3
0.05
0.9
0.7 0.2 1.6 0.60.6
1.9
12
3
2.8
0.2
2.9 0.15
0.4
5.0
2.5
4.5
4.0
3.5
3.0
2.0
1.5
1.0
0.5
0
IC -- VCE
0 0.20.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
5.0
2.5
4.5
4.0
3.5
3.0
2.0
1.5
1.0
0.5
00 0.20.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Collector-to-Emitter Voltage, VCE -- V
Collector Current, IC -- A
Base-to-Emitter Voltage, VBE -- V
IC -- VBE
Collector Current, IC -- A
IT06830 IT06831
60mA
40mA
20mA
15mA
10mA
6mA
4mA
2mA
8mA
IB=0
VCE=2V
Ta=75°C
--25°C
25°C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Collector Cutoff Current ICBO VCB=40V, IE=0 0.1 µA
Emitter Cutoff Current IEBO VEB=4V, IC=0 0.1 µA
DC Current Gain hFE VCE=2V, IC=500mA 250 400
Gain-Bandwidth Product fTVCE=10V, IC=500mA 330 MHz
Output Capacitance Cob VCB=10V, f=1MHz 26 pF
Collector-to-Emitter Saturation Voltage VCE(sat) IC=2A, IB=40mA 85 130 mV
Base-to-Emitter Saturation Voltage VBE(sat) IC=2A, IB=40mA 0.80 1.2 V
Collector-to-Base Breakdown Voltage V(BR)CBO IC=10µA, IE=0 100 V
Collector-to-Emitter Breakdown Voltage V(BR)CES IC=100µA, RBE=∞100 V
Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=1mA, RBE=∞50 V
Emitter-to-Base Breakdown Voltage V(BR)EBO IE=10µA, IC=0 6 V
T urn-ON T ime ton See specified Test Circuit 32 ns
Storage Time tstg See specified Test Circuit 420 ns
Fall Time tfSee specified Test Circuit 28 ns
Marking : DK
Package Dimensions Switching Time Test Circuit
unit : mmm
2150A
CPH3239
No.7723-3/4
5
3
2
0.01 23 57
0.01 1.0 100.1 23 357 572
0.1
7
5
3
2
Ta=75°C
--
25°C
25°C
23 57
0.01 1.0 100.1 23 357 572
5
0.01
7
0.1
7
5
3
2
3
2
Ta=75°C
--25°C
25°C
Collector Current, IC -- A
hFE -- IC
DC Current Gain, hFE
1000
7
5
3
2
10 23 57
0.01 1.0 100.1 23 357 572
100
7
5
3
2
23 57
0.01 1.0 100.1 23 357 572
IT06832
Collector Current, IC -- A
VCE(sat) -- IC
IT06833
Collector Current, IC -- A
VCE(sat) -- IC
Collector Current, IC -- A
VBE(sat) -- IC
10
7
5
3
2
0.1
1.0
7
5
3
2
IT06834 IT06835
--25°C
25°C
Ta=75°C
VCE=2V IC / IB=20
IC / IB=50 IC / IB=50
75°C
25°C
Ta= --25°C
Collector Current, IC -- A
fT -- IC
Gain-Brandwidth Product, fT -- MHz
IT06837
Collector-to-Base Voltage, VCB -- V
Cob -- VCB
Output Capacitance, Cob -- pF
IT06836
f=1MHz
100
7
5
3
10 23 57
0.1 10 1001.0 23 357 572
2
1000
7
5
3
2
10 23 57
0.01 1.0 100.1 23 357 572
100
7
5
3
2
VCE=10V
Ambient Temperature, Ta -- °C
PC -- Ta
Collector Dissipation, PC -- W
1.0
0
0.9
0.8
0.6
0.4
0.2
0 40608020 100 120 140 160
Collector-to-Emitter Voltage, VCE -- V
A S O
Collector Current, IC -- A
2
3
5
7
2
3
5
7
2
3
5
7
10
1.0
0.1
0.01 23 57 23 57 23 57
0.1 1.0 10 100
IT06838 IT06839
Mounted on a ceramic board(600mm
2
✕0.8mm)
Ta=25°C
Single pulse
Mounted on a ceramic board(600mm
2
✕0.8mm)
100µs
500µs
1ms
10ms
100ms
10µs
ICP=7A
DC operation
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- V
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- V
Base-to-Emitter
Saturation Voltage, VBE(sat) -- V
IC=5A
CPH3239
No.7723-4/4
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 2004. Specifications and information herein are subject
to change without notice.
PS
