F-214 MEC1-120-02-F-D-A MEC1-130-02-F-D-A MEC1-140-02-L-D (1,00 mm) .0394" MEC1 SERIES MINI EDGE CARD SOCKET SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?MEC1 Insulator Material: Black LCP Contact Material: BeCu Plating: Sn or Au over 50" (1,27 m) Ni Operating Temp Range: -55C to +125C Current Rating: 2.2 A per pin (2 adjacent pins powered) Voltage Rating: 300 VAC Insertion Depth: (5,84 mm) .230" to (8,13 mm) .320" RoHS Compliant: Yes Processing: Lead-Free Solderable: Yes SMT Lead Coplanarity: (0,10 mm) .004" max (05-20) (0,15 mm) .006" max (30-70) Mates with (1,60 mm) .062" card Mates with: (1,60 mm) .062" card APPLICATION MEC1 Rated @ 3dB Insertion Loss* 9,04 mm Stack Height Single-Ended Signaling 5.5 GHz / 11 Gbps Differential Pair Signaling 6.5 GHz / 13 Gbps *Performance data includes effects of a non-optimized PCB. Complete test data available at www.samtec.com?MEC1 or contact sig@samtec.com 1 MEC1 POSITIONS PER ROW Optional Alignment pin PLATING OPTION 02 D NP OTHER OPTION RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality -A 05, 08, 20, 30, 40, 50, 60, 70 -F -NP = Gold flash on contact, Matte tin on tail -L = No Polarization (05, 08, 20 & 30 positions only) = 10" (0,25 m) Gold on contact, Matte Tin on tail Leave Blank for polarization ALSO AVAILABLE (MOQ Required) * Locking Clip (Manual placement required) * Other platings Contact Samtec. (No. of Positions + 2) x (1,00) .03937 + (2,54) .100 02 140 (6,99) .275 01 Important Note: Samtec recommends that pads on the mating board be Gold plated. Note: Some sizes, styles and options are non-standard, non-returnable. 139 (0,36) (1,00) .014 .03937 (No. of Positions + 2) x (1,00) .03937 Note: While optimized for 50 applications, this connector with alternative signal/ground patterns may also perform well in certain 75 applications. Contact Samtec for further information. (8,89) .350 (1,83) .072 (9,04) .356 POSITIONS PER ROW POLARIZED POSITIONS (No Contact) 05 08 20 30 40 50 60 70 3, 4 5, 6 15, 16 21, 22 31, 32 41, 42 31, 32, 63 & 64 53, 54, 115 & 116 (0,15) .006 (1,40) .055 (8,51) .335 (0,89) .035 DIA -A OPTION WWW.SAMTEC.COM = Alignment Pin metal or plastic at Samtec discretion. -K = (7,87 mm) .310" DIA Polyimide film Pick & Place Pad -TR = Tape & Reel