1
2
3
4
5
6
7
8
1A
1Y
1Z
G
2Z
2Y
2A
GND
VCC
4A
4Y
4Z
G
3Z
3Y
3A
9
12
10
13
15
11
14
16
4
5
6
7
8
18
17
16
15
14
9
10
11 12 13
3
2
120 19
1Z
G
2Z
2Y
NC
1Y
1A
VCC
4A
NC
NC – No internal connection
4Y
4Z
G
NC
3Z
2A
GND
NC
3Y
3A
AM26C31M. . .J OR W PACKAGE
AM26C31Q. . .D PACKAGE
AM26C31C. . .D, DB, OR NS PACKAGE
AM26C31I. . .D, DB, N, NS, OR PW PACKAGE
(TOP VIEW)
AM26C31M. . .FK PACKAGE
(TOP VIEW)
AM26C31
www.ti.com
SLLS103N –DECEMBER 1990–REVISED OCTOBER 2011
QUADRUPLE DIFFERENTIAL LINE DRIVER
Check for Samples: AM26C31
1FEATURES
•Meets or Exceeds the Requirements of
TIA/EIA-422-B and ITU Recommendation V.11
•Low Power, ICC = 100 μA Typ
•Operates From a Single 5-V Supply
•High Speed, tPLH = tPHL = 7 ns Typ
•Low Pulse Distortion, tsk(p) = 0.5 ns Typ
•High Output Impedance in Power-Off
Conditions
•Improved Replacement for AM26LS31
•Available in Q-Temp Automotive
–High-Reliability Automotive Applications
–Configuration Control/Print Support
–Qualification to Automotive Standards
DESCRIPTION/ORDERING INFORMATION
The AM26C31 is a differential line driver with
complementary outputs, designed to meet the
requirements of TIA/EIA-422-B and ITU (formerly
CCITT). The 3-state outputs have high-current
capability for driving balanced lines, such as
twisted-pair or parallel-wire transmission lines, and
they provide the high-impedance state in the
power-off condition. The enable functions are
common to all four drivers and offer the choice of an
active-high (G) or active-low (G) enable input.
BiCMOS circuitry reduces power consumption without
sacrificing speed.
The AM26C31C is characterized for operation from 0°C to 70°C, the AM26C31I is characterized for operation
from –40°C to 85°C, the AM26C31Q is characterized for operation over the automotive temperature range
of –40°C to 125°C, and the AM26C31M is characterized for operation over the full military temperature range
of –55°C to 125°C.
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Copyright ©1990–2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
AM26C31
SLLS103N –DECEMBER 1990–REVISED OCTOBER 2011
www.ti.com
ORDERING INFORMATION
TAPACKAGE(1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING
PDIP (N) Tube of 25 AM26C31CN AM26C31CN
Tube of 40 AM26C31CD
SOIC (D) AM26C31C
0°C to 70°C Reel of 2500 AM26C31CDR
SOP (NS) Reel of 2000 AM26C31CNSR 26C31
SSOP (DB) Reel of 2000 AM26C31CDBR 26C31
PDIP (N) Tube of 25 AM26C31IN AM26C31IN
Tube of 40 AM26C31ID
SOIC (D) AM26C31I
Reel of 2500 AM26C31IDR
–40°C to 85°CSOP (NS) Reel of 2000 AM26C31INSR 26C31I
SSOP (DB) Reel of 2000 AM26C31IDBR 26C31I
TSSOP (PW) Tube of 90 AM26C31IPW 26C31I
Tube of 40 AM26C31QD
–40°C to 125°C SOIC (D) AM26C31QD
Reel of 2500 AM26C31QDR
CDIP (J) Tube of 25 AM26C31MJ AM26C31MJ
–55°C to 125°C CFP (W) Tube of 150 AM26C31MW AM26C31MW
LCCC (FK) Tube of 55 AM26C31MFK AM26C31MFK
(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
Table 1. FUNCTION TABLE
(Each Driver)(1)
INPUT ENABLES OUTPUTS
AG G Y Z
H H X H L
L H X L H
H X L H L
L X L L H
X L H Z Z
(1) H = High level, L = Low level, X = Irrelevant,
Z = High impedance (off)
2Submit Documentation Feedback Copyright ©1990–2011, Texas Instruments Incorporated
Product Folder Link(s): AM26C31
1A
G
2A
4A
G
3A
1
4
7
9
12
15
3Y
10
3Z
11
1Y
2
1Z
3
4Y
14
4Z
13
2Y
6
2Z
5
Input
VCC
TYPICAL OF ALL OUTPUTS
Output
VCC
GND GND
EQUIVALENT OF EACH INPUT
AM26C31
www.ti.com
SLLS103N –DECEMBER 1990–REVISED OCTOBER 2011
LOGIC DIAGRAM (POSITIVE LOGIC)
Pin numbers shown are for the D, DB, J, N, NS, PW, and W packages.
SCHEMATICS OF INPUTS AND OUTPUTS
Copyright ©1990–2011, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): AM26C31
AM26C31
SLLS103N –DECEMBER 1990–REVISED OCTOBER 2011
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT
VCC Supply voltage range(2) –0.5 7 V
VIInput voltage range –0.5 VCC + 0.5 V
VID Differential input voltage range –14 14 V
VOOutput voltage range –0.5 7
IIK Input or output clamp current ±20 mA
IOK
IOOutput current ±150 mA
VCC current 200 mA
GND current –200 mA
D package 73
DB package 82
θJA Package thermal impedance(3) (4) N package 67 °C/W
NS package 64
PW package 108
TJOperating virtual junction temperature 150 °C
Tstg Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings"may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions"is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to the network ground terminal.
(3) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD= (TJ(max) –TA)/θJA. Operating at the absolute maximum TJof 150°C can affect reliability.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS
MIN NOM MAX UNIT
VCC Supply voltage 4.5 5 5.5 V
VID Differential input voltage ±7 V
VIH High-level input voltage 2 V
VIL Low-level input voltage 0.8 V
IOH High-level output current –20 mA
IOL Low-level output current 20 mA
AM26C31C 0 70
AM26C31I –40 85
TAOperating free-air temperature °C
AM26C31Q –40 125
AM26C31M –55 125
4Submit Documentation Feedback Copyright ©1990–2011, Texas Instruments Incorporated
Product Folder Link(s): AM26C31
AM26C31
www.ti.com
SLLS103N –DECEMBER 1990–REVISED OCTOBER 2011
ELECTRICAL CHARACTERISTICS
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
AM26C31C
AM26C31I
PARAMETER TEST CONDITIONS UNIT
MIN TYP(1) MAX
VOH High-level output voltage IO=–20 mA 2.4 3.4 V
VOL Low-level output voltage IO= 20 mA 0.2 0.4 V
VOD Differential output voltage magnitude RL= 100 Ω, See Figure 1 2 3.1 V
Δ|VOD| Change in magnitude of differential output voltage(2) RL= 100 Ω, See Figure 1 ±0.4 V
VOC Common-mode output voltage RL= 100 Ω, See Figure 1 3 V
Δ|VOC| Change in magnitude of common-mode output voltage(2) RL= 100 Ω, See Figure 1 ±0.4 V
IIInput current VI= VCC or GND ±1μA
VO= 6 V 100
IO(off) Driver output current with power off VCC = 0 μA
VO=–0.25 V –100
IOS Driver output short-circuit current VO= 0 –30 –150 mA
VO= 2.5 V 20
IOZ High-impedance off-state output current μA
VO= 0.5 V –20
VI= 0 or 5 V 100 μA
ICC Quiescent supply current IO= 0 VI= 2.4 V or 0.5 1.5 3 mA
V(3)
CiInput capacitance 6 pF
(1) All typical values are at VCC = 5 V and TA= 25°C.
(2) Δ|VOD| and Δ|VOC| are the changes in magnitude of VOD and VOC, respectively, that occur when the input is changed from a high level
to a low level.
(3) This parameter is measured per input. All other inputs are at 0 or 5 V.
SWITCHING CHARACTERISTICS
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
AM26C31C
AM26C31I
PARAMETER TEST CONDITIONS UNIT
MIN TYP(1) MAX
tPLH Propagation delay time, low-to-high-level output 3 7 12
S1 is open, See Figure 2 ns
tPHL Propagation delay time, high-to-low-level output 3 7 12
tsk(p) Pulse skew time (|tPLH –tPHL|) S1 is open, See Figure 2 0.5 4 ns
tr(OD), tf(OD) Differential output rise and fall times S1 is open, See Figure 3 5 10 ns
tPZH Output enable time to high level 10 19
S1 is closed, See Figure 4 ns
tPZL Output enable time to low level 10 19
tPHZ Output disable time from high level 7 16
S1 is closed, See Figure 4 ns
tPLZ Output disable time from low level 7 16
Cpd Power dissipation capacitance (each driver)(2) S1 is open, See Figure 2 170 pF
(1) All typical values are at VCC = 5 V and TA= 25°C.
(2) Cpd is used to estimate the switching losses according to PD= Cpd ×VCC 2×f, where f is the switching frequency.
Copyright ©1990–2011, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Link(s): AM26C31
AM26C31
SLLS103N –DECEMBER 1990–REVISED OCTOBER 2011
www.ti.com
ELECTRICAL CHARACTERISTICS
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
AM26C31Q
AM26C31M
PARAMETER TEST CONDITIONS UNIT
MIN TYP(1) MAX
VOH High-level output voltage IO=–20 mA 2.2 3.4 V
VOL Low-level output voltage IO= 20 mA 0.2 0.4 V
VOD Differential output voltage magnitude RL= 100 Ω, See Figure 1 2 3.1 V
Δ|VOD| Change in magnitude of differential output voltage(2) RL= 100 Ω, See Figure 1 ±0.4 V
VOC Common-mode output voltage RL= 100 Ω, See Figure 1 3 V
Δ|VOC| Change in magnitude of common-mode output voltage(2) RL= 100 Ω, See Figure 1 ±0.4 V
IIInput current VI= VCC or GND ±1μA
VO= 6 V 100
IO(off) Driver output current with power off VCC = 0 μA
VO=–0.25 V –100
IOS Driver output short-circuit current VO= 0 –170 mA
VO= 2.5 V 20
IOZ High-impedance off-state output current μA
VO= 0.5 V –20
VI= 0 or 5 V 100 μA
ICC Quiescent supply current IO= 0 VI= 2.4 V or 0.5 3.2 mA
V(3)
CiInput capacitance 6 pF
(1) All typical values are at VCC = 5 V and TA= 25°C.
(2) Δ|VOD| and Δ|VOC| are the changes in magnitude of VOD and VOC, respectively, that occur when the input is changed from a high level
to a low level.
(3) This parameter is measured per input. All other inputs are at 0 or 5 V.
SWITCHING CHARACTERISTICS
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
AM26C31Q
AM26C31M
PARAMETER TEST CONDITIONS UNIT
MIN TYP(1) MAX
tPLH Propagation delay time, low-to-high-level output 7 12
S1 is open, See Figure 2 ns
tPHL Propagation delay time, high-to-low-level output 6.5 12
tsk(p) Pulse skew time (|tPLH –tPHL|) S1 is open, See Figure 2 0.5 4 ns
tr(OD), tf(OD) Differential output rise and fall times S1 is open, See Figure 3 5 12 ns
tPZH Output enable time to high level 10 19
S1 is closed, See Figure 4 ns
tPZL Output enable time to low level 10 19
tPHZ Output disable time from high level 7 16
S1 is closed, See Figure 4 ns
tPLZ Output disable time from low level 7 16
Cpd Power dissipation capacitance (each driver)(2) S1 is open, See Figure 2 100 pF
(1) All typical values are at VCC = 5 V and TA= 25°C.
(2) Cpd is used to estimate the switching losses according to PD= Cpd ×VCC 2×f, where f is the switching frequency.
6Submit Documentation Feedback Copyright ©1990–2011, Texas Instruments Incorporated
Product Folder Link(s): AM26C31
Input A
(see Note B)
Output Y
1.3 V
50%
tsk(p)
Output Z
tPHL tPLH
tsk(p)
tPLH tPHL
C3 = 40 pF
C2 = 40 pF
C1 =
40 pF
Input
See Note A
TEST CIRCUIT
RL/2
RL/2
1.5 V
500 Ω
S1
1.3 V
1.3 V
3 V
0 V
50%
50%
50%
AM26C31
www.ti.com
SLLS103N –DECEMBER 1990–REVISED OCTOBER 2011
PARAMETER MEASUREMENT INFORMATION
Figure 1. Differential and Common-Mode Output Voltages
A. C1, C2, and C3 include probe and jig capacitance.
B. All input pulses are supplied by generators having the following characteristics: PRR ≤1 MHz, duty cycle ≤50%, and
tr, tf≤6 ns.
Figure 2. Propagation Delay Time and Skew Waveforms and Test Circuit
A. C1, C2, and C3 include probe and jig capacitance.
B. All input pulses are supplied by generators having the following characteristics: PRR ≤1 MHz, duty cycle ≤50%, and
tr, tf≤6 ns.
Copyright ©1990–2011, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Link(s): AM26C31
Enable G Input
(see Note C)
Output WIth
0 V to A Input VOL + 0.3 V
tPLZ
tPHZ tPZH
tPZL
C3 =
40 pF
C2 =
40 pF
C1 =
40 pF
Input A
50 Ω
50 Ω
500 Ω
TEST CIRCUIT
VOLTAGE WAVEFORMS
3 V
0 V
1.5 V
VOL
VOH
VOH - 0.3 V
1.5 V
See Note A
G
G
Enable G Input
Output
Output
Output WIth
3 V to A Input
Enable Inputs
(see Note B)
0 V
3 V 1.5 V
S1
1.3 V1.3 V
2 V
0.8 V
AM26C31
SLLS103N –DECEMBER 1990–REVISED OCTOBER 2011
www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
Figure 3. Differential-Output Rise- and Fall-Time Waveforms and Test Circuit
A. C1, C2, and C3 include probe and jig capacitance.
B. All input pulses are supplied by generators having the following characteristics: PRR ≤1 MHz, duty cycle ≤50%, and
tr, tf≤6 ns.
C. Each enable is tested separately.
Figure 4. Output Enable- and Disable-Time Waveforms and Test Circuit
8Submit Documentation Feedback Copyright ©1990–2011, Texas Instruments Incorporated
Product Folder Link(s): AM26C31
AM26C31
SLLS103N –DECEMBER 1990–REVISED OCTOBER 2011
www.ti.com
REVISION HISTORY
Changes from Revision M (June 2008) to Revision N Page
•Changed units to mA from µA to fix units typo. .................................................................................................................... 4
10 Submit Documentation Feedback Copyright ©1990–2011, Texas Instruments Incorporated
Product Folder Link(s): AM26C31
PACKAGE OPTION ADDENDUM
www.ti.com 5-May-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
AM26C31CD ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CDBLE OBSOLETE SSOP DB 16 TBD Call TI Call TI
AM26C31CDBR ACTIVE SSOP DB 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CDBRE4 ACTIVE SSOP DB 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CDBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CDE4 ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CDG4 ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CDR ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CDRE4 ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CDRG4 ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
AM26C31CNE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
AM26C31CNSR ACTIVE SO NS 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CNSRE4 ACTIVE SO NS 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31CNSRG4 ACTIVE SO NS 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31ID ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IDBLE OBSOLETE SSOP DB 16 TBD Call TI Call TI
AM26C31IDBR ACTIVE SSOP DB 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 5-May-2012
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
AM26C31IDBRE4 ACTIVE SSOP DB 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IDBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IDE4 ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IDG4 ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IDR ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IDRE4 ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IDRG4 ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
AM26C31INE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
AM26C31INSR ACTIVE SO NS 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31INSRG4 ACTIVE SO NS 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IPW ACTIVE TSSOP PW 16 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IPWE4 ACTIVE TSSOP PW 16 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IPWR ACTIVE TSSOP PW 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31IPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31QD ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31QDG4 ACTIVE SOIC D 16 40 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
AM26C31QDR ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 5-May-2012
Addendum-Page 3
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
AM26C31QDRG4 ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF AM26C31 :
•Enhanced Product: AM26C31-EP
•Military: AM26C31M
NOTE: Qualified Version Definitions:
•Enhanced Product - Supports Defense, Aerospace and Medical Applications
PACKAGE OPTION ADDENDUM
www.ti.com 5-May-2012
Addendum-Page 4
•Military - QML certified for Military and Defense Applications
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
AM26C31CDBR SSOP DB 16 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
AM26C31CDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1
AM26C31CNSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
AM26C31IDBR SSOP DB 16 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
AM26C31IDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1
AM26C31INSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
AM26C31IPWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
AM26C31QDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
AM26C31CDBR SSOP DB 16 2000 367.0 367.0 38.0
AM26C31CDR SOIC D 16 2500 333.2 345.9 28.6
AM26C31CNSR SO NS 16 2000 367.0 367.0 38.0
AM26C31IDBR SSOP DB 16 2000 367.0 367.0 38.0
AM26C31IDR SOIC D 16 2500 333.2 345.9 28.6
AM26C31INSR SO NS 16 2000 367.0 367.0 38.0
AM26C31IPWR TSSOP PW 16 2000 367.0 367.0 35.0
AM26C31QDR SOIC D 16 2500 367.0 367.0 38.0
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE
4040065 /E 12/01
28 PINS SHOWN
Gage Plane
8,20
7,40
0,55
0,95
0,25
38
12,90
12,30
28
10,50
24
8,50
Seating Plane
9,907,90
30
10,50
9,90
0,38
5,60
5,00
15
0,22
14
A
28
1
2016
6,50
6,50
14
0,05 MIN
5,905,90
DIM
A MAX
A MIN
PINS **
2,00 MAX
6,90
7,50
0,65 M
0,15
0°–ā8°
0,10
0,09
0,25
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
