AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com QUADRUPLE DIFFERENTIAL LINE DRIVER Check for Samples: AM26C31 FEATURES 1 1A 1 16 VCC 1Y 2 15 4A 1Z 3 14 4Y G 4 13 4Z 2Z 5 12 G 2Y 6 11 2A 7 10 3Z 3Y GND 8 9 3A 2 1 20 19 4A 1A 3 1Z 4 18 4Y G 5 17 4Z NC 6 16 NC 2Z 7 15 G 2Y 8 14 3Z 3Y 3A 9 10 11 12 13 2A The AM26C31 is a differential line driver with complementary outputs, designed to meet the requirements of TIA/EIA-422-B and ITU (formerly CCITT). The 3-state outputs have high-current capability for driving balanced lines, such as twisted-pair or parallel-wire transmission lines, and they provide the high-impedance state in the power-off condition. The enable functions are common to all four drivers and offer the choice of an active-high (G) or active-low (G) enable input. BiCMOS circuitry reduces power consumption without sacrificing speed. NC VCC AM26C31M. . .FK PACKAGE (TOP VIEW) DESCRIPTION/ORDERING INFORMATION NC * * AM26C31M. . .J OR W PACKAGE AM26C31Q. . .D PACKAGE AM26C31C. . .D, DB, OR NS PACKAGE AM26C31I. . .D, DB, N, NS, OR PW PACKAGE (TOP VIEW) 1Y * * * * * Meets or Exceeds the Requirements of TIA/EIA-422-B and ITU Recommendation V.11 Low Power, ICC = 100 A Typ Operates From a Single 5-V Supply High Speed, tPLH = tPHL = 7 ns Typ Low Pulse Distortion, tsk(p) = 0.5 ns Typ High Output Impedance in Power-Off Conditions Improved Replacement for AM26LS31 Available in Q-Temp Automotive - High-Reliability Automotive Applications - Configuration Control/Print Support - Qualification to Automotive Standards GND * NC - No internal connection The AM26C31C is characterized for operation from 0C to 70C, the AM26C31I is characterized for operation from -40C to 85C, the AM26C31Q is characterized for operation over the automotive temperature range of -40C to 125C, and the AM26C31M is characterized for operation over the full military temperature range of -55C to 125C. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1990-2011, Texas Instruments Incorporated AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com ORDERING INFORMATION PACKAGE (1) TA PDIP (N) 0C to 70C -40C to 125C -55C to 125C (1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING Tube of 25 AM26C31CN Tube of 40 AM26C31CD Reel of 2500 AM26C31CDR SOP (NS) Reel of 2000 AM26C31CNSR 26C31 SSOP (DB) Reel of 2000 AM26C31CDBR 26C31 PDIP (N) Tube of 25 AM26C31IN AM26C31IN Tube of 40 AM26C31ID Reel of 2500 AM26C31IDR SOP (NS) Reel of 2000 AM26C31INSR 26C31I SSOP (DB) Reel of 2000 AM26C31IDBR 26C31I TSSOP (PW) Tube of 90 AM26C31IPW 26C31I Tube of 40 AM26C31QD Reel of 2500 AM26C31QDR CDIP (J) Tube of 25 AM26C31MJ AM26C31MJ CFP (W) Tube of 150 AM26C31MW AM26C31MW LCCC (FK) Tube of 55 AM26C31MFK AM26C31MFK SOIC (D) SOIC (D) -40C to 85C (2) SOIC (D) AM26C31CN AM26C31C AM26C31I AM26C31QD Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. Table 1. FUNCTION TABLE (Each Driver) (1) INPUT A (1) 2 ENABLES OUTPUTS G G Y Z H H X H L H L H X L H X L H L L X L L H X L H Z Z H = High level, L = Low level, X = Irrelevant, Z = High impedance (off) Submit Documentation Feedback Copyright (c) 1990-2011, Texas Instruments Incorporated Product Folder Link(s): AM26C31 AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com LOGIC DIAGRAM (POSITIVE LOGIC) 4 G G 12 2 1 1A 2A 3A 3 6 7 5 10 9 11 14 4A 15 13 1Y 1Z 2Y 2Z 3Y 3Z 4Y 4Z Pin numbers shown are for the D, DB, J, N, NS, PW, and W packages. SCHEMATICS OF INPUTS AND OUTPUTS EQUIVALENT OF EACH INPUT TYPICAL OF ALL OUTPUTS VCC VCC Input Output GND GND Submit Documentation Feedback Copyright (c) 1990-2011, Texas Instruments Incorporated Product Folder Link(s): AM26C31 3 AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN (2) MAX UNIT VCC Supply voltage range -0.5 7 V VI Input voltage range -0.5 VCC + 0.5 V VID Differential input voltage range -14 14 V VO Output voltage range -0.5 7 IIK IOK Input or output clamp current IO Output current VCC current Package thermal impedance (3) (4) TJ Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) (4) mA 150 mA 200 mA -200 GND current JA 20 mA D package 73 DB package 82 N package 67 NS package 64 PW package 108 -65 C/W 150 C 150 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values, except differential voltages, are with respect to the network ground terminal. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. RECOMMENDED OPERATING CONDITIONS MIN 4.5 NOM MAX 5 5.5 UNIT VCC Supply voltage VID Differential input voltage VIH High-level input voltage VIL Low-level input voltage 0.8 V IOH High-level output current -20 mA IOL Low-level output current 20 mA 7 TA 4 Operating free-air temperature V 2 AM26C31C 0 V 70 AM26C31I -40 85 AM26C31Q -40 125 AM26C31M -55 125 Submit Documentation Feedback V C Copyright (c) 1990-2011, Texas Instruments Incorporated Product Folder Link(s): AM26C31 AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com ELECTRICAL CHARACTERISTICS over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER AM26C31C AM26C31I TEST CONDITIONS MIN TYP (1) UNIT MAX VOH High-level output voltage IO = -20 mA VOL Low-level output voltage IO = 20 mA VOD Differential output voltage magnitude RL = 100 , See Figure 1 |VOD| Change in magnitude of differential output voltage (2) RL = 100 , See Figure 1 0.4 V VOC Common-mode output voltage RL = 100 , See Figure 1 3 V RL = 100 , See Figure 1 0.4 V 1 A (2) 2.4 0.2 |VOC| Change in magnitude of common-mode output voltage II Input current VI = VCC or GND IO(off) Driver output current with power off VCC = 0 IOS Driver output short-circuit current VO = 0 IOZ High-impedance off-state output current ICC Quiescent supply current Ci Input capacitance 3.4 2 3.1 VO = 6 V -100 -30 -150 VO = 2.5 V 20 VO = 0.5 V -20 (3) IO = 0 VI = 2.4 V or 0.5 V (3) V V 100 VO = -0.25 V VI = 0 or 5 V (1) (2) V 0.4 A mA A 100 A 3 mA 1.5 6 pF All typical values are at VCC = 5 V and TA = 25C. |VOD| and |VOC| are the changes in magnitude of VOD and VOC, respectively, that occur when the input is changed from a high level to a low level. This parameter is measured per input. All other inputs are at 0 or 5 V. SWITCHING CHARACTERISTICS over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS tPLH Propagation delay time, low-to-high-level output tPHL Propagation delay time, high-to-low-level output tsk(p) tr(OD), tf(OD) tPZH Output enable time to high level tPZL Output enable time to low level tPHZ Output disable time from high level tPLZ Output disable time from low level Cpd Power dissipation capacitance (each driver) (2) (1) (2) AM26C31C AM26C31I UNIT MIN TYP (1) MAX 3 7 12 3 7 12 S1 is open, See Figure 2 Pulse skew time (|tPLH - tPHL|) S1 is open, See Figure 2 0.5 4 ns Differential output rise and fall times S1 is open, See Figure 3 5 10 ns 10 19 10 19 7 16 7 16 S1 is closed, See Figure 4 S1 is closed, See Figure 4 S1 is open, See Figure 2 170 ns ns ns pF All typical values are at VCC = 5 V and TA = 25C. Cpd is used to estimate the switching losses according to PD = Cpd x VCC 2 x f, where f is the switching frequency. Submit Documentation Feedback Copyright (c) 1990-2011, Texas Instruments Incorporated Product Folder Link(s): AM26C31 5 AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com ELECTRICAL CHARACTERISTICS over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER AM26C31Q AM26C31M TEST CONDITIONS MIN TYP (1) UNIT MAX VOH High-level output voltage IO = -20 mA VOL Low-level output voltage IO = 20 mA VOD Differential output voltage magnitude RL = 100 , See Figure 1 |VOD| Change in magnitude of differential output voltage (2) RL = 100 , See Figure 1 0.4 V VOC Common-mode output voltage RL = 100 , See Figure 1 3 V RL = 100 , See Figure 1 0.4 V 1 A (2) 2.2 0.2 |VOC| Change in magnitude of common-mode output voltage II Input current VI = VCC or GND IO(off) Driver output current with power off VCC = 0 IOS Driver output short-circuit current VO = 0 IOZ High-impedance off-state output current ICC Quiescent supply current Ci Input capacitance (1) (2) (3) 3.4 2 V 0.4 3.1 VO = 6 V V 100 VO = -0.25 V -100 -170 VO = 2.5 V 20 VO = 0.5 V -20 IO = 0 V A mA A VI = 0 or 5 V 100 A VI = 2.4 V or 0.5 V (3) 3.2 mA 6 pF All typical values are at VCC = 5 V and TA = 25C. |VOD| and |VOC| are the changes in magnitude of VOD and VOC, respectively, that occur when the input is changed from a high level to a low level. This parameter is measured per input. All other inputs are at 0 or 5 V. SWITCHING CHARACTERISTICS over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS AM26C31Q AM26C31M MIN tPLH Propagation delay time, low-to-high-level output tPHL Propagation delay time, high-to-low-level output tsk(p) tr(OD), tf(OD) tPZH Output enable time to high level tPZL Output enable time to low level tPHZ Output disable time from high level tPLZ Output disable time from low level Cpd Power dissipation capacitance (each driver) (2) (1) (2) 6 UNIT TYP (1) MAX 7 12 6.5 12 S1 is open, See Figure 2 Pulse skew time (|tPLH - tPHL|) S1 is open, See Figure 2 0.5 4 ns Differential output rise and fall times S1 is open, See Figure 3 5 12 ns 10 19 10 19 7 16 7 16 S1 is closed, See Figure 4 S1 is closed, See Figure 4 S1 is open, See Figure 2 100 ns ns ns pF All typical values are at VCC = 5 V and TA = 25C. Cpd is used to estimate the switching losses according to PD = Cpd x VCC 2 x f, where f is the switching frequency. Submit Documentation Feedback Copyright (c) 1990-2011, Texas Instruments Incorporated Product Folder Link(s): AM26C31 AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION Figure 1. Differential and Common-Mode Output Voltages A. C1, C2, and C3 include probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, duty cycle 50%, and tr, tf 6 ns. C2 = 40 pF Input RL/2 500 C1 = 40 pF 1.5 V S1 C3 = 40 pF RL/2 See Note A TEST CIRCUIT 3V 1.3 V 0V Input A (see Note B) tPLH Output Y 50% tPHL 50% 1.3 V tsk(p) Output Z 50% tsk(p) 50% 1.3 V tPHL tPLH Figure 2. Propagation Delay Time and Skew Waveforms and Test Circuit A. C1, C2, and C3 include probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, duty cycle 50%, and tr, tf 6 ns. Submit Documentation Feedback Copyright (c) 1990-2011, Texas Instruments Incorporated Product Folder Link(s): AM26C31 7 AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) Figure 3. Differential-Output Rise- and Fall-Time Waveforms and Test Circuit A. C1, C2, and C3 include probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, duty cycle 50%, and tr, tf 6 ns. C. Each enable is tested separately. Output C2 = 40 pF 0V 3V Enable Inputs (see Note B) Input A C1 = 40 pF C3 = 40 pF G G 50 500 1.5 V S1 50 Output See Note A TEST CIRCUIT Enable G Input (see Note C) 3V 1.3 V1.3 V Enable G Input Output WIth 0 V to A Input 0V 1.5 V VOL + 0.3 V VOL tPLZ Output WIth 3 V to A Input 0.8 V tPZL VOH VOH - 0.3 V 2V 1.5 V tPHZ tPZH VOLTAGE WAVEFORMS Figure 4. Output Enable- and Disable-Time Waveforms and Test Circuit 8 Submit Documentation Feedback Copyright (c) 1990-2011, Texas Instruments Incorporated Product Folder Link(s): AM26C31 AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com TYPICAL CHARACTERISTICS SUPPLY CURRENT vs SWITCHING FREQUENCY Figure 5. Submit Documentation Feedback Copyright (c) 1990-2011, Texas Instruments Incorporated Product Folder Link(s): AM26C31 9 AM26C31 SLLS103N - DECEMBER 1990 - REVISED OCTOBER 2011 www.ti.com REVISION HISTORY Changes from Revision M (June 2008) to Revision N * 10 Page Changed units to mA from A to fix units typo. .................................................................................................................... 4 Submit Documentation Feedback Copyright (c) 1990-2011, Texas Instruments Incorporated Product Folder Link(s): AM26C31 PACKAGE OPTION ADDENDUM www.ti.com 5-May-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty 40 Green (RoHS & no Sb/Br) Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC D 16 CU NIPDAU Level-1-260C-UNLIM AM26C31CDBLE OBSOLETE SSOP DB 16 AM26C31CDBR ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CDBRE4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CDBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CDE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type CU NIPDAU N / A for Pkg Type Call TI Call TI AM26C31CNE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) AM26C31CNSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CNSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31CNSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31ID ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IDBLE OBSOLETE SSOP DB 16 AM26C31IDBR ACTIVE SSOP DB 16 TBD 2000 Green (RoHS & no Sb/Br) Addendum-Page 1 Call TI Samples (Requires Login) AM26C31CD TBD (3) Call TI CU NIPDAU Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 5-May-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp AM26C31IDBRE4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IDBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IDE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type AM26C31INE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type AM26C31INSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31INSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IPWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31IPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31QD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31QDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26C31QDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 2 (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device AM26C31QDRG4 5-May-2012 Status (1) Package Type Package Drawing ACTIVE SOIC D Pins Package Qty 16 2500 Eco Plan (2) Green (RoHS & no Sb/Br) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CU NIPDAU Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF AM26C31 : * Enhanced Product: AM26C31-EP * Military: AM26C31M NOTE: Qualified Version Definitions: * Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 5-May-2012 * Military - QML certified for Military and Defense Applications Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing AM26C31CDBR SSOP SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 12.0 16.0 Q1 DB 16 2000 330.0 16.4 8.2 6.6 2.5 AM26C31CDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 AM26C31CNSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 AM26C31IDBR SSOP DB 16 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 AM26C31IDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 AM26C31INSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 AM26C31IPWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 AM26C31QDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) AM26C31CDBR SSOP DB 16 2000 367.0 367.0 38.0 AM26C31CDR SOIC D 16 2500 333.2 345.9 28.6 AM26C31CNSR SO NS 16 2000 367.0 367.0 38.0 AM26C31IDBR SSOP DB 16 2000 367.0 367.0 38.0 AM26C31IDR SOIC D 16 2500 333.2 345.9 28.6 AM26C31INSR SO NS 16 2000 367.0 367.0 38.0 AM26C31IPWR TSSOP PW 16 2000 367.0 367.0 35.0 AM26C31QDR SOIC D 16 2500 367.0 367.0 38.0 Pack Materials-Page 2 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated