PRODUCT DATASHEET Rocket-(sputnik) series Ordering number CA10325 Description CA10325_Rocket-O Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Rocket-(sputnik) Lens XR-E Transparent 26 mm 15.1 mm Round PMMA Tape Ready FWHM Efficiency cd/lm Gerber File 6+40 degrees 86 % Available FWHM Efficiency cd/lm Gerber File 8 degrees 89 % Available Ordering number CA10324 Description CA10324_Rocket-SS Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Rocket-(sputnik) Lens XR-E Transparent 26 mm 15.1 mm Round PMMA Tape Ready Ordering number CA10540 Description CA10540_Rocket-O_MetalPlated Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Rocket-(sputnik) Lens XR-E Metal 26 mm 15.1 mm Round PMMA Tape Ready FWHM Efficiency cd/lm Gerber File 8+34 degrees Available Ordering number CA10541 Description CA10541_Rocket-SS_MetalPlated Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Rocket-(sputnik) Lens XR-E Metal 26 mm 15.1 mm Round PMMA Tape Ready FWHM Efficiency cd/lm Gerber File 10 degrees Available February 12th 2012 13:33 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Rocket-(sputnik) series Ordering number CA10250 Description CA10250_Rocket-M Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Rocket-(sputnik) Lens XR-E Transparent 26 mm 15.1 mm Round PMMA Tape Ready FWHM Efficiency cd/lm Gerber File 26 degrees 87 % Available FWHM Efficiency cd/lm Gerber File 38 degrees 76 % Available Ordering number CA10406 Description CA10406_Rocket-W Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Rocket-(sputnik) Lens XR-E Transparent 26 mm 15.1 mm Round PMMA Tape Ready NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. February 12th 2012 13:33 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Rocket-(sputnik) series GENERAL INFORMATION - Product series especially designed & optimized for XR-E series of LEDs. - Special care taken to make light distribution as uniform as possible. - Lens material optical grade PMMA with high UV and temperature resistance (105 degrees of Celcius / 220 degrees of Fahrenheit). Allows use of high current and temperature conditions. Please find more information about used material from below: http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf - Fastening to heat sink with a PU foam adhesive tape of automotive grade. Please find fastening details by clicking link: http://www.ledil.com/datasheets/DataSheet_TAPE.pdf NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end product. For example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the tape. NOTE 2: Assembly to the surface must be made straight, so the tape bonds constant and balanced with fastening surface. Slanted assembly might cause unbalanced bond to the surface. All surfaces where tape is applied must be clean, dry and free from grease and dirt. If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LED manufacturer - this is important as cleaning shall under no circumstances damage LEDs or other electronics components on the PCB. Further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. February 12th 2012 13:33 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001