
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
−FC18−
Plastic Film Capacitors
Stacked Metallized PPS Film Chip Capacitor
Type: ECHU(C)
Stacked metallized PPS film as dielectric with simple
mold-less construction
■Features
•Small in size
•Low loss and excellent frequency characteristics
•For reflow soldering
•RoHS directive compliant
■Recommended Applications
•Time-constant
•Filtering
•Oscillation and resonance
•Resonance circuit for LCD backlight inverter unit
■Explanation of Numbers
1234567891011
E C H U 1
Product code
Dielectric &
construction
Rated voltage
Capacitance
C
Cap. Tol. Suffix Suffix
1 100 VDC
9 12 mm
V 16 mm
Tape width
■Specifications
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Category temp. range
(Including temperature-rise on unit surface)
−55 ℃to +105 ℃
100 VDC
0.010 µF to 0.22 µF(E12)
±2 %(G),±5 %(J)
Between terminals : Rated volt. (VDC)✕150 % 60 s
tanδ≦0.6 % (20 ℃, 1 kHz)
IR≧3000 MΩ(20 ℃, 100 VDC, 60 s)
Reflow soldering : 260 ˚C max. and 95 s max. at more than 220 ˚C
(Temp. at cap. Surface)
Rated voltage
Capacitance range
Capacitance tolerance
Withstand voltage
Dissipation factor (tan )
Insulation resistance (IR)
Soldering conditions
G±2 %
J±5 %
p Œ ¯ ¶ ‚ P1 ‘32 12.11.14 20:49 y [ W 18