DAT E DRAWN Oct.-19-`07 CHECKED Oct.-19-`07 CHECKED Oct.-19-`07 NAME APPROVED DWG.NO. T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E l e c t r i c D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y n or u s e d for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. S P E C I F I C AT I O N Device Name SILICON DIODE Type Name YG981S6R Spec. No. MS5D3301 Fuji Electric Device Technology Co.,Ltd. MS5D3301 1/12 H04-004-07b Date Classification Oct.-19 Enactment -2007 Fuji Electric Device Technology Co.,Ltd. DWG.NO. T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. Revised Records Ind. Content Applied date Issued date Drawn Checked Approved MS5D3301 2/12 H04-004-06b 1.SCOPE This specification provides the ratings and the test requirement for FUJI SILICON DIODE YG981S6R 2.TYPE NAME,ORDERING TYPE NAME,COUNTRY CODE,PACKAGING ASSEMBLY LOCATION Type name Ordering type name Country code YG981S6R Blank Japan YG981S6R-P P Philippines YG981S6R Packaging assembly location 3.ORDERING TYPE NAME,PACKAGE TYPE,OUT VIEWMARKING,MOLDING RESIN, CHARACTERISTICS Ordering type name Package type YG981S6R TO-220F Page 9/12 Page 9/12 Molding resin Characteristics Page UL:V-0 10/1212/12 Bar code label is EIAJ C-3 specification. Indispensable description items are shown as below. (1) Type name (2) Production code (3) Quantity (4) Lot (Date code) (5) Company code 4. RATINGS 4.1 MAXIMUM RATINGS (at Ta=25 Item unless otherwise specified.) Symbol Repetitive peak reverse voltage VRRM Isolating voltage Viso Average output current Non-repetitive forward surge current Operating junction temperature Storage temperature Io IFSM Conditions Terminals-to-Case,AC.1min 50Hz square wave duty =1/2 Tc =58 Sine wave, 10ms 1shot Ratings Units 600 V 1500 V 8 A 40 A Tj 150 Tstg -40150 Maximum Units 4.2 ELECTRICAL CHARACTERISTICS (at Ta=25 unless otherwise specified.) Item Symbol Conditions Forward voltage VF IF = 8 A 3.0 V Reverse current IR VR =VRRM 25 A Reverse recovery time trr IF=0.1A,IR=0.2A,Irec=0.05A 0.026 s Junction to case 4.5 /W Recommended torque 0.30.5 Nm 2.0 g Thermal resistance Rth(j-c) 4.3 MECHANICAL CHARACTERISTICS Mounting torque Approximate mass Fuji Electric Device Technology Co.,Ltd. DWG.NO. T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. YG981S6R-P Out viewMarking MS5D3301 3/12 H04-004-03a 5.TEST AND INSPECTION 5.1 STANDARD TEST CONDITION Standard test condition is Ta=2565%R.H. If judgment is no doubt, the test condition is possible to test in normal condition Ta=5354885%R.H. 5.2 STRUCTURE INSPECTION It inspect with eye and measure, Item 3 shall be satisfied. 5.3 FORWARD AND REVERSE CHARACTERISTICS It inspect on the standard condition, Item 4.2 shall be satisfied. 5.4 TEST 2 3 Mechanical test T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. 1 Test items Terminal strength (Tensile) Terminal strength (Bending) Mounting strength 4 Vibration 5 Shock Solder ability 1 6 Solder ability 2 7 Resistance to soldering heat Testing methods and conditions Reference standard EIAJ ED4701 Pull force : 10N Force maintaining duration :101s EIAJ ED4701/401 method 1 Load force : 5N Number of times : 2times(90deg./time) EIAJ ED4701/401 method 3 EIAJ ED4701/402 method 2 Screwing torque value:(M3) : 4010Ncm Frequency : 100Hz to 2kHz Acceleration : 100m/s2 Sweeping time : 4min./1 cycle 4times for each X, Y&Z directions. 2 Peak amplitude : 15km/s Duration time : 0.5ms 3times for each X, Y&Z directions. Solder : Sn-37Pb Solder temp. : 2355 Immersion time : 50.5s Apply to flux Solder : Sn-3Ag-0.5Cu Solder temp. : 2455 Immersion time : 50.5s Apply to flux Solder temp. : 2605C Immersion time : 101s Number of times : 1time Fuji Electric Device Technology Co.,Ltd. DWG.NO. Test No. Sampling number 5 5 5 EIAJ ED4701/403 test code D 5 EIAJ ED4701/404 test code D 5 EIAJ ED4701/303 test code A 5 - EIAJ ED4701/302 test code A Acceptance number (0 : 1) 5 5 MS5D3301 4/12 H04-004-03a 1 2 Endurance test T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. 3 Test items High temp. Storage Low temp. Storage Temperature humidity storage 4 Temperature humidity bias 5 Unsaturated pressurized vapor 6 Temperature cycle 7 Thermal shock 8 9 10 Steady state operating life Intermittent operating life High temp. Reverse bias Failure criteria Testing methods and conditions Temperature :stg max Test duration : 1000h Temperature :stg min Test duration : 1000h Temperature : 852C Relative humidity : 855% Test duration : 1000h Temperature : 852C Relative humidity : 855% Bias voltage : VRRMx 0.8 Test duration : 1000h Temperature : 1302C Relative humidity : 855% Vapor pressure : 230kPa Test duration : 48h High temp. side : Tstg max Room temp. : 535 Low temp. side : Tstg min Duration time : HT 30min,RT 5min LT 30min Number of cycles : 100 cycles Fluid : pure water(running water) High temp. side : 100+0/-5C Low temp. side : 0+5/-0C Duration time : HT 5min,LT 5min Number of cycles : 100 cycles Ta=255C Rated load Test duration : 1000h Tj=Tjmax 50 3min ON, 3min OFF Test duration : 10000cycles Temperature : Ta=100 C Bias voltage : VR=VRRM duty=1/2 Test duration : 1000h IR USL x 5 VFUSL x 1.1 Reference standard EIAJ ED4701 Sampling number EIAJ ED4701/201 22 EIAJ ED4701/202 22 EIAJ ED4701/103 test code C 22 EIAJ ED4701/103 test code C 22 EIAJ ED4701/103 test code F 22 EIAJ ED4701/105 22 EIAJ ED4701/307 test code A 22 - Acceptance number (0 : 1) 22 EIAJ ED4701/106 22 EIAJ ED4701/101 22 USL : Upper specification limit Fuji Electric Device Technology Co.,Ltd. DWG.NO. Test No. MS5D3301 5/12 H04-004-03a 6.CAUTIONS Although Fuji Electric is continually improving product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing physical injury, fire, or other problem in case any of the products fail. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. The products described in this specification are intended for use in the following electronic and electrical equipment which has normal reliability requirements. Computers OA equipment Communications equipment (Terminal devices) Measurement equipment Machine tools AV equipment Electrical home appliances Personal equipment Industrial robots etc. The products described in this specification are not designed or manufactured to be used in equipment or systems used under life-threatening situations. If you are considering using these products in the equipment listed below, first check the system construction and required reliability, and take adequate Transportation equipment (automobiles, trains, ships, etc.) Backbone network equipment Traffic-signal control equipment Gas alarms, leakage gas auto breakers Submarine repeater equipment Burglar alarms, fire alarms, emergency equipment Medical equipment Nuclear control equipment etc. Do not use the products in this specification for equipment requiring strict reliability such as (but not limited to): Aerospace equipment Aeronautical equipment 7.WARNINGS The Diodes should be used in products within their absolute maximum rating (voltage, current, temperature, etc. ). The diodes may be destroyed if used beyond the rating. The equipment containing Diodes should have adequate fuses or circuit breakers to prevent the equipment from causing secondary destruction (ex. fire, explosion etc...). Use the Diodes within their reliability and lifetime under certain environments or conditions. The Diodes may fail before the target lifetime of your products if used under certain reliability conditions. You must design the Diodes to be operated within the specified maximum ratings (voltage, current, temperature, etc. ) to prevent possible failure or destruction of devices. Consider the possible temperature rise not only for the junction and case, but also for the outer leads. Do not directly touch the leads or package of the Diodes while power is supplied or during operation, to avoid electric shock and burns. The Diodes are made of incombustible material. However, if a Diode fails, it may emit smoke of flame. Also, operating the Diodes near any flammable place or material may cause the Diodes to emit smoke or flame in case the Diodes become even hotter during operation. Design the arrangement to prevent the spread of fire. The Diodes should not used in an environment in the presence of acid, organic matter, or corrosive gas. (hydrogen sulfide, sulfurous acid gas.) The Diodes should not used in an irradiated field since they are not radiation proof. Fuji Electric Device Technology Co.,Ltd. DWG.NO. T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. safety measures such as a backup system to prevent the equipment from malfunctioning. MS5D3301 6/12 H04-004-03a INSTALLATION Soldering involves temperatures which exceed the device storage temperature rating. To avoid device damage and to ensure reliability, observe the following guidelines from the quality assurance standard. Table 1: Solder temperature and duration Solder Method Duration temperature 2605 101sec Flow 35010 3.50.5sec Soldering iron The immersion depth of the lead should basically be up to the lead stopper and the distance should be a maximum of 1.5mm from the device. When flow-soldering, be careful to avoid immersing the package in the solder bath. Refer to the following torque reference When mounting the device on a heat sink. Excess torque applied to the mounting screw causes damage to the device and weak torque will Table 2:Recommended tightening torque Package style Screw Recommended tightening torque 0.30.5Nm TO-220F M3 The heat sink should have a flatness within 30m and roughness within 10m. Also, keep the tightening torque within the limits of this specification. Improper handling may cause isolation breakdown leading to a critical accident. We recommend the use of thermal compound to optimize the efficiency of heat radiation. It is important to evenly apply the compound and to eliminate any air voids. STORAGE The Diodes must be stored at a standard temperature of 5 to 35 and relative humidity of 45 to 75%.If the storage area is very dry, a humidifier may be required. In such a case, use only deionized water or boiled water, since the chlorine in tap water may corrode the leads. The Diodes should not be subjected to rapid changes in temperature to avoid condensation on the surface of the Diodes. Therefore, store the Diodes in a place where the temperature is steady. The Diodes should not be stored on top of each other, since this may cause excessive external force on the case. The Diodes should not be stored with the lead terminals remaining unprocessed. Rust may cause presoldered connections to go fail during later processing. The Diodes should be stored in antistatic containers or shipping bags. Fuji Electric Device Technology Co.,Ltd. DWG.NO. T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. increase the thermal resistance, both of which conditions may destroy the device. MS5D3301 7/12 H04-004-03a 8.APPENDIX This products does not contain PBBs (Polybrominated Biphenyl) or PBDEs (Polybrominated Diphenyl Ether ) , substances. This products does not contain Class-I ODS and Class-II ODS substances set force by `Clean Air Act of US' law. If you have any questions about any part of this specification, please contact Fuji Electric Device Technology or its sales agent before using the product Neither Fuji nor its agents shall be held liable for any injury caused by using the products not in accordance with the instructions. This specification does not confer any industrial property rights or other rights, nor constitute a Fuji Electric Device Technology Co.,Ltd. DWG.NO. T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. license for such rights. MS5D3301 8/12 H04-004-03a No. YG981S6 Fuji Electric Device Technology Co.,Ltd. DWG.NO. T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. TYPE YG981S6R YG981S6R-P YG981S6 Sn-Cu dipping (Pb1000ppm) Sn-Cu (Pb1000ppm) 1 P 1. mm UNIT:mm MS5D3301 9/12 H04-004-03a Forward Characteristic (typ.) Reverse Characteristic (typ.) 102 Tj=150C 101 Tj=125C 10 IR Reverse Current (A) Tj=100C IF Forward Current (A) Tj=150C Tj=125C Tj=100C Tj=25C 1 100 10-1 10-3 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 0 2.8 100 200 300 400 500 600 700 VR Reverse Voltage (V) VF Forward Voltage (V) Reverse Power Dissipation (max.) Forward Power Dissipation (max.) 0.035 30 DC 360 360 0.030 VR I0 25 (W) 20 Reverse Power Dissipation Forward Power Dissipation (W) 0.025 Square wave =60 Square wave =120 Sine wave =180 15 Square wave =180 DC PR 10 WF 5 0.020 =180 0.015 0.010 0.005 Per 1element 0.000 0 0 0 2 4 6 IF(AV) Average Forward Current 8 100 200 VR 300 400 Reverse Voltage 500 600 700 (V) (A) Fuji Electric Device Technology Co.,Ltd. DWG.NO. T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f Fu ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. Tj=25C 10-2 MS5D3301 10/12 H04-004-03a Peak Half - Wave Current (A) Tc DC 30 0 1 2 IF(AV) Average Forward Current 4 6 10 Cj Case Temperature (C) 100 90 80 Junction Capacitance (pF) 110 60 Square wave =180 Sine wave =180 50 Square wave =120 8 10 12 Fuji Electric Device Technology Co.,Ltd. DWG.NO. IFSM T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f F u ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. 160 Current Derating (IF(AV)-Tc) (max.) 1000 Junction Capacitance Characteristic (typ.) 150 140 130 120 100 70 10 40 Square wave =60 20 (A) 1 :Conduction angle of forward current for each rectifier element 1 10 100 VR Reverse Voltage (V) 1000 IF(AV):Forward current of center-tap full wave connection 1000 Surge Capability (max.) 100 10 1 Number of Cycles at 50Hz 100 MS5D3301 11/12 H04-004-03a 10 -3 10 -2 10 -1 t Time Fuji Electric Device Technology Co.,Ltd. DWG.NO. T h i s m a t e r i a l a n d t h e i n f o r m a t i o n h e r e i n i s t h e p r o p e r t y o f F u ji E le c t r ic D e v i c e Te c h n o l o g y C o . , L t d . T h e y s h a l l b e n e i t h e r r e p r o d u c e d , c o p i e d , l e n t , o r d i s c l o s e d i n a n y w a y w h a t s o e v e r f o r t h e u s e o f a n y t h ird pa rt y nor u s ed for the manufacturing purposes without the express written consent of Fuji Electric Device Technology Co.,Ltd. Transient Thermal Impedance (C/W) 10 2 Transient Thermal Impedance (max.) 10 1 Rth j-c:4.5/W 10 0 10 -1 (sec) 10 0 10 1 10 2 MS5D3301 12/12 H04-004-03a