150W Constant Current Mode LED Driver 110 M M Typical lifetime>62000 hours 7 years warranty series IP65 IP67 Features Constant Current mode output Metal housing with Classdesign Built-in active PFC function IP67 / IP65 design for indoor or outdoor installations Function options: output adjustable via potentiometer; 3 in 1 dimming; Timer dimming HLG-120H-C Applications LED street lighting LED fishing lamp LED harbor lighting LED building architectural lighting LED greenhouse lighting LED bay lighting Description HLG-120H-C series is a 150W AC/DC LED driver featuring the constant current mode and high voltage output. HLG-120H-C operates from 90~305VAC and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for -40 ~ +90 case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-120H-C is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. Model Encoding HLG - 120 H - C500 A Function options Rated output current(350/500/700/1050/1400mA) High input voltage up to 305VAC Rated wattage Series name Type A B IP Level IP65 IP67 AB IP65 D IP67 Function Io adjustable through built-in potentiometer. 3 in 1 dimming function (1~10Vdc, 10V PWM signal and resistance) I o adjustable through built-in potentiometer & 3 in 1 dimming function (1~10Vdc, 10V PWM signal and resistance) Timer dimming function, contact MEAN WELL for details(safety pending). Note In Stock In Stock In Stock By request File Name:HLG-120H-C-SPEC 2018-09-30 HLG-120H-C 150W Constant Current Mode LED Driver series SPECIFICATION MODEL HLG-120H-C350 HLG-120H-C500 HLG-120H-C1400 350mA 500mA 700mA 1050mA 1400mA RATED POWER 150.5W 150W 150.5W 155.4W 151.2W 150V ~ 300V 107V ~ 215V 74V ~ 148V 54V ~ 108V 525 ~ 1050mA 700 ~ 1400mA 94% 93.5% Adjustable for A/AB-Type only (via built-in potentiometer) CURRENT ADJ. RANGE CURRENT RIPPLE 175 ~ 350mA 250 ~ 500mA 350 ~ 700mA 8.0% max. @rated current CURRENT TOLERANCE 5% SET UP TIME Note.4 1000ms / 115VAC VOLTAGE RANGE 90 ~ 305VAC 127 ~ 431VDC Note.3 (Please refer to "STATIC CHARACTERISTIC" section) 500ms / 230VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF0.98/115VAC, PF0.96/230VAC, PF0.93/277VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) TOTAL HARMONIC DISTORTION THD< 20% (@ load50% /115VAC, 230VAC; @ load75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION (THD)" section) EFFICIENCY (Typ.) 94% INPUT 94% 94% AC CURRENT (Typ.) 1.6A / 115VAC INRUSH CURRENT(Typ.) COLD START 50A(twidth=600s measured at 50% Ipeak) at 230VAC; Per NEMA 410 MAX. No. of PSUs on 16A CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC 0.8 A / 230VAC 0.7A / 277VAC LEAKAGE CURRENT <0.75mA / 277VAC SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed 475 ~ 495V PROTECTION OVER VOLTAGE 335 ~ 355V 240 ~ 260V 165 ~ 175V 120 ~ 130V Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE ENVIRONMENT HLG-120H-C1050 RATED CURRENT CONSTANT CURRENT REGION Note.2 215 ~ 430V OUTPUT HLG-120H-C700 WORKING TEMP. Tcase=-40 ~ +90(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) MAX. CASE TEMP. Tcase=+90 WORKING HUMIDITY 10 ~ 95% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.13-12, EN/AS/NZS 61347-1, EN/AS/NZS 61347-2-13, EN62384 independent,GB19510.1,GB19510.14, SAFETY STANDARDS Note.6 IP65 or IP67, J61347-1, J61347-2-13, EAC TP TC 004 approved SAFETY & EMC OTHERS NOTE WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION I/P-FG:2KVAC O/P-FG:1.5KVAC Note.6 Compliance to EN55015, EN61000-3-2 Class C (@ load50%) ; EN61000-3-3,GB17743 and GB17625.1, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020 MTBF 652.2K hrs min. DIMENSION 220*68*38.8mm (L*W*H) PACKING 1.04Kg; 12pcs/13.5Kg/0.8CUFT Telcordia SR-332 (Bellcore) ; 191.1K hrs min. MIL-HDBK-217F (25) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains. 7. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less. 8. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 9. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 10. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:HLG-120H-C-SPEC 2018-09-30 150W Constant Current Mode LED Driver HLG-120H-C series BLOCK DIAGRAM PFC fosc : 70KHz PWM fosc : 60KHz I/P EMI FILTER & RECTIFIERS POWER SWITCHING PFC CIRCUIT RECTIFIERS & FILTER O.L.P. O.T.P. FG O.L.P. PWM & PFC CONTROL +V -V DIM+ DIM(B Type) DETECTION CIRCUIT O.V.P. DRIVING METHODS OF LED MODULE This series works in constant current mode to directly drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. 100 Should there be any compatibility issues, please contact MEAN WELL. Vo(%) Constant Current region 50 100 Io (%) Typical output current normalized by rated current (%) File Name:HLG-120H-C-SPEC 2018-09-30 HLG-120H-C 150W Constant Current Mode LED Driver series DIMMING OPERATION FG (Green/Yellow) AC/L(Brown) AC/N(Blue) DIM+(Gray) DIM-(Black) HLG-120H-C B Type -V(Blue) +V(Brown) 3 in 1 dimming function (for B/AB-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 1 0 0A (typ.) Applying additive 1 ~ 10VDC 100% +V -V + + - - DIM+ Output current (%) 90% 80% 70% 60% 50% 40% + 30% Additive Voltage - 20% DIM- 10% 1V "DO NOT connect "DIM- to -V" 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% +V -V + + - - DIM+ Output current (%) 90% 80% 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input "DO NOT connect "DIM- to -V" Applying additive resistance: 100% -V + + - - DIM+ Additive Resistance Output current (%) 90% +V 80% 70% 60% 50% 40% 30% DIM"DO NOT connect "DIM- to -V" 20% 10% 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance File Name:HLG-120H-C-SPEC 2018-09-30 HLG-120H-C 150W Constant Current Mode LED Driver series Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options. N FG L Switch Relay Adjuster 10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L HLG-120H-C B-Type AC/N DIM+ DIMV(-) V(+) Gray Black Blue Brown LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. File Name:HLG-120H-C-SPEC 2018-09-30 HLG-120H-C 150W Constant Current Mode LED Driver series OUTPUT LOAD vs TEMPERATURE(Note.8) 100 100 Others 80 Others 80 C500,C700 C500,C700 60 LOAD (%) LOAD (%) 60 40 20 -40 -20 -10 0 15 30 50 60 40 20 70 (HORIZONTAL) -40 -20 0 25 AMBIENT TEMPERATURE,Ta () 35 45 60 75 90 (HORIZONTAL) Tcase () STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Tcase at 80 100 90 1 80 0 .9 8 0 .9 6 LOAD (%) PF 70 0 .9 4 277V 0 .9 2 60 230V 0 .9 50 115V 0 .8 8 40 0 .8 6 0 .8 4 90 100 125 135 145 155 165 175 180 200 230 50% 305 60% 70% 80% 90% 100% (150W) INPUT VOLTAGE (V) 60Hz LOAD TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD HLG-120H-C series possess superior working efficiency that up to 94% can be reached in field applications. 700mA Model, Tcase at 80 700mA Model, Tcase at 80 95 25 THD(%) 15 277VAC 10 230VAC 115VAC 5 EFFICIENCY(%) 92 20 89 86 277V 230V 83 115V 80 77 0 50% 60% 70% LOAD 80% 90% 100% 74 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:HLG-120H-C-SPEC 2018-09-30 HLG-120H-C 150W Constant Current Mode LED Driver series LIFE TIME 120 LIFETIME(Kh) 100 80 60 40 20 0 20 30 40 50 60 70 80 90 Tcase ( ) File Name:HLG-120H-C-SPEC 2018-09-30 HLG-120H-C 150W Constant Current Mode LED Driver MECHANICAL SPECIFICATION Case No.994 series Unit:mm A-Type 220 196 12 9.4 9.6 98 30020 -V(Blue) +V(Brown) SOOW 17AWG & H07RN - F 1 . 0mm x2C (for HLG-120H-C350) SJOW 17AWG & H07RN - F 1 . 0mm x2C(for others) 4.2x4PL : Max. Case Temperature 38.8 tc tc 34 9.4 34.2 Io ADJ. 68 30020 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJOW 17AWG & H05RN - F 1 . 0mm x3C B-Type 220 196 12 9.6 : Max. Case Temperature 98 DIM+(Gray) DIM-(Black) -V(Blue) SOOW 17AWG & H07RN - F 1 . 0mm x2C +V(Brown) (for HLG-120H-C350) SJOW 17AWG & H07RN - F 1 . 0mm x2C(for others) 4.2x4PL 38.8 tc tc 34 34.2 9.4 30020 SJOW 17AWG&H07RN-F 1.0mmx2C 68 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJOW 17AWG & H05RN - F 1 . 0mm x3C 9.4 30020 File Name:HLG-120H-C-SPEC 2018-09-30 HLG-120H-C 150W Constant Current Mode LED Driver series AB-Type 220 196 12 9.4 9.6 30020 SJOW 17AWG&H07RN-F 1.0mmx2C 98 DIM+(Gray) DIM-(Black) -V(Blue) SOOW 17AWG & H07RN - F 1 . 0mm x2C +V(Brown) (for HLG-120H-C350) SJOW 17AWG & H07RN - F 1 . 0mm x2C(for others) 4.2x4PL : Max. Case Temperature 38.8 tc tc 34 9.4 34.2 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJOW 17AWG & H05RN - F 1 . 0mm x3C Io ADJ. 68 30020 D-Type 220 196 12 34 tc : Max. Case Temperature 98 30020 -V(Blue) +V(Brown) SOOW 17AWG & H07RN - F 1 . 0mm x2C (for HLG-120H-C350) SJOW 17AWG & H07RN - F 1 . 0mm x2C(for others) 4.2x4PL 38.8 tc 68 34.2 9.4 30020 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJOW 17AWG & H05RN - F 1 . 0mm x3C 9.4 9.6 File Name:HLG-120H-C-SPEC 2018-09-30 150W C onstant Current Mode LED Driver HLG-120H-C series WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HLG-120H-C to operate in dry/wet/damp or outdoor environment. AC source HLG-120H-C I/P Size O/P Pin Configuration (Female) M12 Order No. Suitable Current 4-PIN 5A/PIN M12-04 10A max. 5-PIN 5A/PIN M12-05 10A max. Size Pin Configuration (Female) M15 2-PIN 12A/PIN M15-02 12A max. Order No. Suitable Current LED Lamp Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-120H-C O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:HLG-120H-C-SPEC 2018-09-30