Amphenol D-Sub Connectors D- Sub-01 Rev. 02/17 Amphenolntroduction & Page Contents - Introduction AN mphenol M2000 Series D Sub Connectors are MIL Qualified & listed in QPL & meets the requirement of MIL-DTL-24308. M2000 Series D Sub Connectors are subminiature rack & panel type with polarized shell & having pin/socket machined contacts which provide high reliability & density for the connectors. They are used in variety of applications due to its versatile design where weight & dimensions are constraint factor. Applications: " Military " Aerospace am |aoLO Ks} tare " Information System " Communication System Content Page Introduction ----------- 7 rrr rrr rr rr rrr rrr 1 Technical Specification -- ----------------------------------- 2 Ordering Information ~--~--~--~-~--------~--------------------- 2 QPL Approved Part List --------------------~-------~--~--~--~--- 3-11 Receptacle Plug Assembly Exploded View ~--------~-------------~- 41 Insert Arrangement For Standard D Sub Connector ----------------- 12 PCB Layout For Standard D Sub Connector - ---------------------- 13 PCB Layout For High Density D Sub Connector -------------------- 14 Receptacle & Plug Connector -------------------------------- 15-16 Contact Information for D Sub -------------------------------- 17-18 ABS a 19-20 Special Products Solder Type Standard D Sub Connector (Non Environmental) ----------- 22 Standard D Sub Grommet Type Connector ----------------------- 23 Straight PC Tail D Sub Connector ----------------------------- 24 Standard D Sub Right Angle PC Tail Connector - -------------------- 25 Standard D Sub Right Angle PC Tail Contact with Extra Length Connector --- 26-34 High Density D Sub Right Angle PC Tail Connector ------------------ 35-38 sO ad 39echnical Specifications QPL-Crimp Version Characteristics Standard High Density Shell Steel / Brass Steel / Brass Material Insulator Thermoset/Thermoplast Thermoset/Thermoplast Contact Copper Alloy Copper Alloy Finish Shell Cadmium, Nickel, Gold Cadmium, Nickel, Gold Contact Gold Over Nickel Gold Over Nickel Contact Rating 7.5A Max 7.5A Max Electrical Test Voltage-Max 1000 Vrms 1000 Vrms Insulation Resistance > 5000 m Ohm > 5000 m Ohm Contact Resistance 7.3m Ohm 7.3m Ohm Insertion/Removal Force 5N Max 5N Max Mechanical Durability 500 Cycles 500 Cycles Wire Gauge AWG 20 - 28 AWG 22 - 28 Environmental Temperature - 55 Deg C to + 125 Deg C -55 C to + 125 C Salt Spray 48 Hrs 48 Hrs Damp Heat 10 Days 10 Days Ordering Information A M 24308 /2 - XXX Connector Class (Refer Table 1) Connector Type Specification Sheet Number (Class) Military Designation Manufacturers Logo Connector Type 2: Receptacle Connector with Polarized Shell & Socket Crimp contact. 4: Plug Connector with Polarized Shell & Pin Crimp Contact. 6: Receptacle Connector with Polarized Shell with Socket Crimp Contact (Non-Magnetic) 8: Plug Connector with Polarized shell & Pin Crimp Contact (Non-Magnetic) &pproved Part List QPL-Table | Sr. Military Manufacturers Type | Position | CMP | IR | Shey Finish No. |__Designation Designation Contact_| Tool 1 M24308/2-1F M2000/2-1F Standard 9 Socket N Steel Cadmium YP 2 M24308/2-2F M2000/2-2F Standard 15 Socket N Steel | Cadmium YP 3 M24308/2-3F M2000/2-3F Standard 25 Socket N Steel | Cadmium YP 4 M24308/2-4F M2000/2-4F Standard 37 Socket N Steel | Cadmium YP *5 M24308/2-5F M2000/2-5F Standard 50 Socket N Steel | Cadmium YP 6 M24308/2-6F M2000/2-6F Standard 9 Socket Y Steel | Cadmium YP *7 M24308/2-7F M2000/2-7F Standard 15 Socket Y Steel Cadmium YP *8 M24308/2-8F M2000/2-8F Standard 25 Socket Y Steel Cadmium YP 9 M24308/2-9F M2000/2-9F Standard 37 Socket Y Steel Cadmium YP 10 M24308/2-10F M2000/2-10F Standard 50 Socket Y Steel Cadmium YP 11 M24308/2-281F M2000/2-281F Standard 9 N N Steel Cadmium YP 12 M24308/2-282F M2000/2-282F Standard 15 N N Steel Cadmium YP 13 M24308/2-283F M2000/2-283F Standard 25 N N Steel Cadmium YP 14 M24308/2-284F M2000/2-284F Standard 37 N N Steel Cadmium YP 15 M24308/2-285F M2000/2-285F Standard 50 N N Steel Cadmium YP 16 M24308/2-11F M2000/2-11F High Density 15 Socket N Steel Cadmium YP 17 M24308/2-12F M2000/2-12F High Density 26 Socket N Steel Cadmium YP 18 M24308/2-13F M2000/2-13F High Density 44 Socket N Steel Cadmium YP 19 M24308/2-14F M2000/2-14F High Density 62 Socket N Steel Cadmium YP 20 M24308/2-15F M2000/2-15F High Density 78 Socket N Steel Cadmium YP 21 M24308/2-17F M2000/2-17F High Density 15 Socket Y Steel Cadmium YP 22 M24308/2-18F M2000/2-18F High Density 26 Socket Y Steel Cadmium YP 23 M24308/2-19F M2000/2-19F High Density 44 Socket Y Steel Cadmium YP 24 M24308/2-20F M2000/2-20F High Density 62 Socket Y Steel Cadmium YP 25 M24308/2-21F M2000/2-21F High Density 78 Socket Y Steel Cadmium YP 26 M24308/2-286F M2000/2-286F High Density 15 N N Steel Cadmium YP 27 M24308/2-287F M2000/2-287F High Density 26 N N Steel Cadmium YP 28 M24308/2-288F M2000/2-288F High Density 44 N N Steel Cadmium YP 29 M24308/2-289F M2000/2-289F High Density 62 N N Steel Cadmium YP N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivationpproved Part List QPL S| oeagon | Morfecwres [type [Poston | ome, | 18 | snot | Fn 30 | M24308/2-290F M2000/2-290F Standard 78 N N Steel | Cadmium YP 31 M24308/2-516 M2000/2-516 Standard 9 Socket Steel Nickel 32 M24308/2-517 M2000/2-517 Standard 15 Socket N Steel Nickel 33 M24308/2-518 M2000/2-518 Standard 25 Socket N Steel Nickel 34 M24308/2-519 M2000/2-519 Standard 37 Socket N Steel Nickel 35 M24308/2-520 M2000/2-520 Standard 50 Socket N Steel Nickel 36 M24308/2-521 M2000/2-521 Standard 9 Socket Y Steel Nickel 37 M24308/2-522 M2000/2-522 Standard 15 Socket Y Steel Nickel 38 M24308/2-523 M2000/2-523 Standard 25 Socket Y Steel Nickel 39 M24308/2-524 M2000/2-524 Standard 37 Socket Y Steel Nickel 40 M24308/2-525 M2000/2-525 Standard 50 Socket Y Steel Nickel 44 M24308/2-560 M2000/2-560 Standard 9 N N Steel Nickel 42 M24308/2-561 M2000/2-561 Standard 15 N N Steel Nickel 43 M24308/2-562 M2000/2-562 Standard 25 N N Steel Nickel 44 M24308/2-563 M2000/2-563 Standard 37 N N Steel Nickel 45 M24308/2-564 M2000/2-564 Standard 50 N N Steel Nickel 46 M24308/2-526 M2000/2-526 High Density 15 Socket N Steel Nickel 47 M24308/2-527 M2000/2-527 High Density 26 Socket N Steel Nickel 48 M24308/2-528 M2000/2-528 High Density 44 Socket N Steel Nickel 49 M24308/2-529 M2000/2-529 High Density 62 Socket N Steel Nickel 50 M24308/2-530 M2000/2-530 High Density 78 Socket N Steel Nickel 51 M24308/2-532 M2000/2-532 High Density 15 Socket Y Steel Nickel 52 M24308/2-533 M2000/2-533 High Density 26 Socket Y Steel Nickel 53 M24308/2-534 M2000/2-534 High Density 44 Socket Y Steel Nickel 54 M24308/2-535 M2000/2-535 High Density 62 Socket Y Steel Nickel 55 M24308/2-536 M2000/2-536 High Density 78 Socket Y Steel Nickel 56 M24308/2-565 M2000/2-565 High Density 15 N N Steel Nickel 57 M24308/2-566 M2000/2-556 High Density 26 N N Steel Nickel 58 M24308/2-567 M2000/2-5567 High Density 44 N N Steel Nickel N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivationpproved Part List QPL Sr] _ Miltary Manufacturers Type | Position | CrmP | IR | che | Finish No. |__Designation Designation Contact_| Tool 59 M24308/2-568 M2000/2-568 High Density 62 N N Steel Nickel 60 M24308/2-569 M2000/2-569 High Density 78 N Steel Nickel 61 M24308/4-1F M2000/4-1F Standard 9 Pin N Steel | Cadmium YP 62 M24308/4-2F M2000/4-2F Standard 15 Pin N Steel Cadmium YP 63 M24308/4-3F M2000/4-3F Standard 25 Pin N Steel Cadmium YP 64 M24308/4-4F M2000/4-4F Standard 37 Pin N Steel Cadmium YP 65 M24308/4-5F M2000/4-5F Standard 50 Pin N Steel Cadmium YP 66 M24308/4-6F M2000/4-6F Standard 9 Pin Y Steel Cadmium YP 67 M24308/4-7F M2000/4-7F Standard 15 Pin Y Steel Cadmium YP 68 M24308/4-8F M2000/4-8F Standard 25 Pin Y Steel Cadmium YP 69 M24308/4-9F M2000/4-9F Standard 37 Pin Y Steel Cadmium YP 70 M24308/4-10F M2000/4-10F Standard 50 Pin Y Steel Cadmium YP 71 | M24308/4-259F M2000/4-259F Standard 9 N N Steel Cadmium YP 72 | M24308/4-260F M2000/4-260F Standard 15 N N Steel Cadmium YP 73 M24308/4-261 F M2000/4-261F Standard 25 N N Steel Cadmium YP 74 | M24308/4-262F M2000/4-262F Standard 37 N N Steel Cadmium YP 75 M24308/4-263F M2000/4-263F Standard 50 N N Steel Cadmium YP 76 M24308/4-11F M2000/4-11F High Density 15 Pin N Steel Cadmium YP 77 M24308/4-12F M2000/4-12F High Density 26 Pin N Steel Cadmium YP 78 M24308/4-13F M2000/4-13F High Density 44 Pin N Steel Cadmium YP 79 M24308/4-14F M2000/4-14F High Density 62 Pin N Steel Cadmium YP 80 M24308/4-15F M2000/4-15F High Density 78 Pin N Steel Cadmium YP 81 M24308/4-17F M2000/4-17F High Density 15 Pin Y Steel Cadmium YP 82 M24308/4-18F M2000/4-18F High Density 26 Pin Y Steel Cadmium YP 83 M24308/4-19F M2000/4-19F High Density 44 Pin Y Steel Cadmium YP 84 M24308/4-20F M2000/4-20F High Density 62 Pin Y Steel Cadmium YP 85 M24308/4-21F M2000/4-21F High Density 78 Pin Y Steel Cadmium YP 86 M24308/4-264F M2000/4-264F High Density 15 N N Steel Cadmium YP 87 M24308/4-265F M2000/4-265F High Density 26 N N Steel Cadmium YP N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivationpproved Part List QPL Sr. Military Manufacturers Type | Position | CMP | IR | Shey Finish No. | Designation Designation Contact | Tool 88 | M24308/4-266F M2000/4-266F High Density 44 N N Steel | Cadmium YP 89 | M24308/4-267F M2000/4-267F High Density 62 N Steel Cadmium YP 90 | M24308/4-268F M2000/4-268F High Density 78 N N Steel | Cadmium YP 91 | M24308/4-335 M2000/4-335 Standard 9 Pin N Steel Nickel 92 | M24308/4-336 M2000/4-336 Standard 15 Pin N Steel Nickel 93 | M24308/4-337 M2000/4-337 Standard 25 Pin N Steel Nickel 94 | M24308/4-338 M2000/4-338 Standard 37 Pin N Steel Nickel 95 | M24308/4-339 M2000/4-339 Standard 50 Pin N Steel Nickel 96 | M24308/4-340 M2000/4-340 Standard 9 Pin Y Steel Nickel 97 | M24308/4-341. M2000/4-341 Standard 15 Pin Y Steel Nickel 98 | M24308/4-342 M2000/4-342 Standard 25 Pin Y Steel Nickel 99 | M24308/4-343 M2000/4-343 Standard 37 Pin Y Steel Nickel 100 | M24308/4-344 M2000/4-344 Standard 50 Pin Y Steel Nickel 101 | M24308/4-357 M2000/4-357 Standard 9 N N Steel Nickel 102 | M24308/4-358 M2000/4-358 Standard 15 N N Steel Nickel 103 | M24308/4-359 M2000/4-359 Standard 25 N N Steel Nickel 104 | M24308/4-360 M2000/4-360 Standard 37 N N Steel Nickel 105 | M24308/4-361 M2000/4-361 Standard 50 N N Steel Nickel 106 | M24308/4-345 M2000/4-345 High Density 15 Pin N Steel Nickel 107 | M24308/4-346 M2000/4-346 High Density 26 Pin N Steel Nickel 108 | M24308/4-347 M2000/4-347 High Density 44 Pin N Steel Nickel 109 | M24308/4-348 M2000/4-348 High Density 62 Pin N Steel Nickel 110 | M24308/4-349 M2000/4-349 High Density 78 Pin N Steel Nickel 111 | M24308/4-351 M2000/4-351 High Density 15 Pin Y Steel Nickel 112 | M24308/4-352 M2000/4-352 High Density 26 Pin Y Steel Nickel 113 | M24308/4-353 M2000/4-353 High Density 44 Pin Y Steel Nickel 114 M24308/4-354 M2000/4-354 High Density 62 Pin Y Steel Nickel 115 | M24308/4-355 M2000/4-355 High Density 78 Pin Y Steel Nickel 116 | M24308/4-362 M2000/4-362 High Density 15 N N Steel Nickel N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivationpproved Part List QPL Sr] Miltary | Manufacturers | = type | Position | Crime | 'R | she | Finish No. | Designation Designation Contact_| Tool 117 | M24308/4-363 M2000/4-363 High Density 26 N N Steel Nickel 118 | M24308/4-364 M2000/4-364 High Density 44 N Steel Nickel 119 | M24308/4-365 M2000/4-365 High Density 62 N N Steel Nickel 120 | M24308/4-366 M2000/4-366 High Density 78 N N Steel Nickel 121 M24308/6-1F M2000/6-1F Standard 9 Socket N Brass Cadmium YP 122 M24308/6-2F M2000/6-2F Standard 15 Socket N Brass Cadmium YP 123 M24308/6-3F M2000/6-3F Standard 25 Socket N Brass Cadmium YP 124 M24308/6-4F M2000/6-4F Standard 37 Socket N Brass Cadmium YP 125 M24308/6-5F M2000/6-5F Standard 50 Socket N Brass Cadmium YP 126 M24308/6-6F M2000/6-6F Standard 9 Socket Y Brass Cadmium YP 127 M24308/6-7F M2000/6-7F Standard 15 Socket Y Brass Cadmium YP 128 M24308/6-8F M2000/6-8F Standard 25 Socket Y Brass Cadmium YP 129 M24308/6-9F M2000/6-9F Standard 37 Socket Y Brass Cadmium YP 130 | M24308/6-10F M2000/6-10F Standard 50 Socket Y Brass Cadmium YP 131 | M24308/6-281F M2000/6-281F Standard 9 N N Brass Cadmium YP 132 | M24308/6-282F M2000/6-282F Standard 15 N N Brass | Cadmium YP 133 | M24308/6-283F M2000/6-283F Standard 25 N N Brass | Cadmium YP 134 | M24308/6-284F M2000/6-284F Standard 37 N N Brass | Cadmium YP 135 | M24308/6-285F M2000/6-285F Standard 50 N N Brass | Cadmium YP 136 M24308/6-11F M2000/6-11F High Density 15 Socket N Brass Cadmium YP 137 M24308/6-12F M2000/6-12F High Density 26 Socket N Brass Cadmium YP 138 M24308/6-13F M2000/6-13F High Density 44 Socket N Brass Cadmium YP 139 M24308/6-14F M2000/6-14F High Density 62 Socket N Brass Cadmium YP 140 | M24308/6-15F M2000/6-15F High Density 78 Socket N Brass Cadmium YP 14 M24308/6-17F M2000/6-17F High Density 15 Socket Y Brass Cadmium YP 142 | M24308/6-18F M2000/6-18F High Density 26 Socket Y Brass Cadmium YP 143 | M24308/6-19F M2000/6-19F High Density 44 Socket Y Brass | Cadmium YP 144 M24308/6-20F M2000/6-20F High Density 62 Socket Y Brass Cadmium YP 145 M24308/6-21F M2000/6-24F High Density 78 Socket Y Brass Cadmium YP N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivationpproved Part List QPL Sr] Miltary | Manufacturers | = type | Position | Crime | 'R | she | Finish No. | Designation Designation Contact | Tool 146 | M24308/6-286F M2000/6-286F High Density 15 N N Brass | Cadmium YP 147 | M24308/6-287F M2000/6-287F High Density 26 N Brass Cadmium YP 148 | M24308/6-288F M2000/6-288F High Density 44. N N Brass | Cadmium YP 149 | M24308/6-289F M2000/6-289F High Density 62 N N Brass Cadmium YP 150 | M24308/6-290F M2000/6-290F High Density 78 N N Brass Cadmium YP 151 | M24308/6-502 M2000/6-502 Standard 9 Socket N Brass Gold 152 M24308/6-503 M2000/6-503 Standard 15 Socket N Brass Gold 153 | M24308/6-504 M2000/6-504 Standard 25 Socket N Brass Gold 154 M24308/6-505 M2000/6-505 Standard 37 Socket N Brass Gold 155 M24308/6-506 M2000/6-506 Standard 50 Socket N Brass Gold 156 | M24308/6-507 M2000/6-507 Standard 9 Socket Y Brass Gold 157 M24308/6-508 M2000/6-508 Standard 15 Socket Y Brass Gold 158 M24308/6-509 M2000/6-509 Standard 25 Socket Y Brass Gold 159 | M24308/6-510 M2000/6-510 Standard 37 Socket Y Brass Gold 160 | M24308/6-511 M2000/6-511 Standard 50 Socket Y Brass Gold 161 | M24308/6-540 M2000/6-540 Standard 9 N N Brass Gold 162 | M24308/6-541 M2000/6-541 Standard 15 N N Brass Gold 163 | M24308/6-542 M2000/6-542 Standard 25 N N Brass Gold 164 | M24308/6-543 M2000/6-543 Standard 37 N N Brass Gold 165 | M24308/6-544 M2000/6-544 Standard 50 N N Brass Gold 166 | M24308/6-512 M2000/6-512 High Density 15 Socket N Brass Gold 167 | M24308/6-513 M2000/6-513 High Density 26 Socket N Brass Gold 168 | M24308/6-514 M2000/6-514 High Density 44 Socket N Brass Gold 169 M24308/6-515 M2000/6-515 High Density 62 Socket N Brass Gold 170 | M24308/6-516 M2000/6-516 High Density 78 Socket N Brass Gold 171 | M24308/6-518 M2000/6-518 High Density 15 Socket Y Brass Gold 172 | M24308/6-519 M2000/6-519 High Density 26 Socket Y Brass Gold 173 | M24308/6-520 M2000/6-520 High Density 44, Socket Y Brass Gold 174 | M24308/6-521 M2000/6-521 High Density 62 Socket Y Brass Gold N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivationpproved Part List QPL Sr] Miltary | Manufacturers | = type | Position | Crime | 'R | she | Finish No. |__Designation Designation Contact_| Tool 175 | M24308/6-522 M2000/6-522 High Density 78 Socket Y Brass Gold 176 | M24308/6-545 M2000/6-545 High Density 15 N Brass Gold 177 | M24308/6-546 M2000/6-546 High Density 26 N N Brass Gold 178 | M24308/6-547 M2000/6-547 High Density 44 N N Brass Gold 179 | M24308/6-548 M2000/6-548 High Density 62 N N Brass Gold 180 | M24308/6-549 M2000/6-549 High Density 78 N N Brass Gold 181 M24308/8-1F M2000/8-1F Standard 9 Pin N Brass | Cadmium YP 182 M24308/8-2F M2000/8-2F Standard 15 Pin N Brass | Cadmium YP 183 M24308/8-3F M2000/8-3F Standard 25 Pin N Brass | Cadmium YP 184 M24308/8-4F M2000/8-4F Standard 37 Pin N Brass | Cadmium YP 185 M24308/8-5F M2000/8-5F Standard 50 Pin N Brass | Cadmium YP 186 M24308/8-6F M2000/8-6F Standard 9 Pin Y Brass | Cadmium YP 187 M24308/8-7F M2000/8-7F Standard 15 Pin Y Brass Cadmium YP 188 M24308/8-8F M2000/8-8F Standard 25 Pin Y Brass Cadmium YP 189 M24308/8-9F M2000/8-9F Standard 37 Pin Y Brass | Cadmium YP 190 | M24308/8-10F M2000/8-10F Standard 50 Pin Y Brass Cadmium YP 191 | M24308/8-259F M2000/8-259F Standard 9 N N Brass | Cadmium YP 192 | M24308/8-260F M2000/8-260F Standard 15 N N Brass Cadmium YP 193 | M24308/8-261F M2000/8-261F Standard 25 N N Brass | Cadmium YP 194 | M24308/8-262F M2000/8-262F Standard 37 N N Brass | Cadmium YP 195 | M24308/8-263F M2000/8-263F Standard 50 N N Brass | Cadmium YP 196 | M24308/8-11F M2000/8-11F High Density 15 Pin N Brass | Cadmium YP 197 | M24308/8-12F M2000/8-12F High Density 26 Pin N Brass | Cadmium YP 198 | M24308/8-13F M2000/8-13F High Density 44 Pin N Brass | Cadmium YP 199 | M24308/8-14F M2000/8-14F High Density 62 Pin N Brass Cadmium YP 200 | M24308/8-15F M2000/8-15F High Density 78 Pin N Brass | Cadmium YP 201 | M24308/8-17F M2000/8-17F High Density 15 Pin Y Brass | Cadmium YP 202 | M24308/8-18F M2000/8-18F High Density 26 Pin Y Brass | Cadmium YP 203 | M24308/8-19F M2000/8-19F High Density 44 Pin Y Brass | Cadmium YP N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivationpproved Part List QPL S| octuamton | Manufacturers |" tyne [roston | i, | 18 | snot | Fn 204 | M24308/8-20F M2000/8-20F High Density 62 Pin Y Brass Cadmium YP 205 | M24308/8-21F M2000/8-21F High Density 78 Pin Y Brass Cadmium YP 206 | M24308/8-264F M2000/8-264 High Density 15 N N Brass Cadmium YP 207 | M24308/8-265F M2000/8-265 High Density 26 N N Brass | Cadmium YP 208 | M24308/8-266F M2000/8-266 High Density 44 N N Brass | Cadmium YP 209 | M24308/8-267F M2000/8-267 High Density 62 N N Brass | Cadmium YP 210 | M24308/8-268F M2000/8-268 High Density 78 N N Brass | Cadmium YP 211 M24308/8-335 M2000/8-335 Standard 9 Pin N Brass Gold 212 | M24308/8-336 M2000/8-336 Standard 15 Pin N Brass Gold 213 | M24308/8-337 M2000/8-337 Standard 25 Pin N Brass Gold 214 | M24308/8-338 M2000/8-338 Standard 37 Pin N Brass Gold 215 | M24308/8-339 M2000/8-339 Standard 50 Pin N Brass Gold 216 | M24308/8-340 M2000/8-340 Standard 9 Pin Y Brass Gold 217 | M24308/8-341 M2000/8-341 Standard 15 Pin Y Brass Gold 218 | M24308/8-342 M2000/8-342 Standard 25 Pin Y Brass Gold 219 | M24308/8-343 M2000/8-343 Standard 37 Pin Y Brass Gold 220 | M24308/8-344 M2000/8-344 Standard 50 Pin Y Brass Gold 221 M24308/8-357 M2000/8-357 Standard 9 N N Brass Gold 222 | M24308/8-358 M2000/8-358 Standard 15 N N Brass Gold 223 | M24308/8-359 M2000/8-359 Standard 25 N N Brass Gold 224 | M24308/8-360 M2000/8-360 Standard 37 N N Brass Gold 225 | M24308/8-361 M2000/8-361 Standard 50 N N Brass Gold 226 | M24308/8-345 M2000/8-345 High Density 15 Pin N Brass Gold 227 | M24308/8-346 M2000/8-346 High Density 26 Pin N Brass Gold 228 | M24308/8-347 M2000/8-347 High Density 44 Pin N Brass Gold 229 | M24308/8-348 M2000/8-348 High Density 62 Pin N Brass Gold 230 | M24308/8-349 M2000/8-349 High Density 78 Pin N Brass Gold 231 M24308/8-351 M2000/8-351 High Density 15 Pin Y Brass Gold 232 | M24308/8-352 M2000/8-352 High Density 26 Pin Y Brass Gold N - Not Supplied with connector, Y - Supplied with connector, YP - Yellow Passivation <>pproved Part List QPL Sr. Military Manufacturers Type | Position | CAMP | IR | Shen Finish No. |__Designation Designation Contact_| Tool 233 M24308/8-353 M2000/8-353 High Density 44 Pin Y Brass Gold 234 | M24308/8-354 M2000/8-354 High Density 62 Pin Y Brass Gold 235 | M24308/8-355 M2000/8-355 High Density 78 Pin Y Brass Gold 236 M24308/8-362 M2000/8-362 High Density 15 N N Brass Gold 237 M24308/8-363 M2000/8-363 High Density 26 N N Brass Gold 238 | M24308/8-364 M2000/8-364 High Density 44 N N Brass Gold 239 M24308/8-365 M2000/8-365 High Density 62 N N Brass Gold 240 M24308/8-366 M2000/8-366 High Density 78 N N Brass Gold 241 M24308/2-1Z M2000/2-1Z Standard 9 Socket N Steel Zinc YP 242 | M24308/2-2Z M2000/2-2Z Standard 15 Socket N Steel Zinc YP 243 | M24308/2-3Z M2000/2-3Z Standard 25 Socket N Steel Zinc YP 244 | M24308/2-4Z M2000/2-4Z Standard 37 Socket N Steel Zinc YP 245 | M24308/2-5Z M2000/2-5Z Standard 50 Socket N Steel Zinc YP 246 M24308/2-6Z M2000/2-6Z Standard 9 Socket Y Steel Zinc YP 247 M24308/2-7Z M2000/2-7Z Standard 15 Socket Y Steel Zinc YP 248 M24308/2-8Z M2000/2-8Z Standard 25 Socket Y Steel Zinc YP 249 M24308/2-9Z M2000/2-9Z Standard 37 Socket Y Steel Zinc YP 250 | M24308/2-10Z M2000/2-10Z Standard 50 Socket Y Steel Zinc YP 251 | M24308/2-281Z M2000/2-281Z Standard 9 N N Steel Zinc YP 252 | M24308/2-282Z M2000/2-2822 Standard 15 N N Steel Zinc YP 253 | M24308/2-283Z M2000/2-283Z Standard 25 N N Steel Zinc YP 254 | M24308/2-284Z M2000/2-2842Z Standard 37 N N Steel Zinc YP 255 | M24308/2-285Z M2000/2-2852 Standard 50 N N Steel Zinc YP 256 | M24308/2-11Z M2000/2-11Z High Density 15 Socket N Steel Zinc YP 257 | M24308/2-12Z M2000/2-12Z High Density 26 Socket N Steel Zinc YP 258 | M24308/2-13Z M2000/2-13Z High Density 44 Socket N Steel Zinc YP 259 M24308/2-14Z M2000/2-14Z High Density 64 Socket N Steel Zinc YP 260 M24308/2-15Z M2000/2-15Z High Density 78 Socket N Steel Zinc YP 261 M24308/2-17Z M2000/2-17Z High Density 15 Socket Y Steel Zinc YP 262 M24308/2-18Z M2000/2-18Z High Density 26 Socket Y Steel Zinc YPpproved Part List QPL Sr. Military Manufacturers Type | Position | CMP | IR | Shey Finish No. |__Designation Designation Contact_| Tool 263 M24308/2-19Z M2000/2-19Z High Density 44 Socket Y Steel Zinc YP 264 | M24308/2-20Z M2000/2-20Z High Density 62 Socket Y Steel Zinc YP 265 | M24308/2-21Z M2000/2-21Z High Density 78 Socket Y Steel Zinc YP 266 | M24308/2-286Z M2000/2-286Z High Density 15 N N Steel Zinc YP 267 | M24308/2-287Z M2000/2-287Z High Density 26 N N Steel Zinc YP 268 | M24308/2-288Z M2000/2-288Z High Density 44 N N Steel Zinc YP 269 | M24308/2-289Z M2000/2-289Z High Density 62 N N Steel Zinc YP 270 | M24308/2-290Z M2000/2-290Z High Density 78 N N Steel Zinc YP 271 M24308/4-1Z M2000/4-1Z Standard 9 Pin N Steel Zinc YP 272 M24308/4-2Z M2000/4-2Z Standard 15 Pin N Steel Zinc YP 273 M24308/4-3Z M2000/4-3Z Standard 25 Pin N Steel Zinc YP 274 M24308/4-4Z M2000/4-4Z Standard 37 Pin N Steel Zinc YP 275 M24308/4-5Z M2000/4-5Z Standard 50 Pin N Steel Zinc YP 276 M24308/4-6Z M2000/4-6Z Standard 9 Pin Y Steel Zinc YP 277 M24308/4-7Z M2000/4-7Z Standard 15 Pin Y Steel Zinc YP 278 M24308/4-8Z M2000/4-8Z Standard 25 Pin Y Steel Zinc YP 279 M24308/4-9Z M2000/4-9Z Standard 37 Pin Y Steel Zinc YP 280 M24308/4-10Z M2000/4-10Z Standard 50 Pin Y Steel Zinc YP 281 | M24308/4-259Z M2000/4-259Z Standard 9 N N Steel Zinc YP 282 | M24308/4-260Z M2000/4-260Z Standard 15 N N Steel Zinc YP 283 | M24308/4-261Z M2000/4-261Z Standard 25 N N Steel Zinc YP 284 | M24308/4-262Z M2000/4-2622Z Standard 37 N N Steel Zinc YP 285 | M24308/4-263Z M2000/4-263Z Standard 50 N N Steel Zinc YP 286 M24308/4-11Z M2000/4-11Z High Density 15 Pin N Steel Zinc YP 287 M24308/4-12Z M2000/4-12Z High Density 26 Pin N Steel Zinc YP 288 M24308/4-13Z M2000/4-13Z High Density 44 Pin N Steel Zinc YP 289 M24308/4-14Z M2000/4-14Z High Density 62 Pin N Steel Zinc YP 290 M24308/4-15Z M2000/4-15Z High Density 78 Pin N Steel Zinc YP 291 M24308/4-17Z M2000/4-17Z High Density 15 Pin Y Steel Zinc YP 292 M24308/4-18Z M2000/4-18Z High Density 26 Pin Y Steel Zinc YPpproved Part List QPL Sr] Miltary | Manufacturers | = type | Position | Crime | 'R | she | Finish No. | Designation Designation Contact | Tool 293 | M24308/4-19Z M2000/4-19Z High Density 44 Pin Y Steel Zinc YP 294 | M24308/4-20Z M2000/4-20Z High Density 62 Pin Y Steel Zinc YP 295 | M24308/4-21Z M2000/4-21Z High Density 78 Pin Y Steel Zinc YP 296 | M24308/4-2642 M2000/4-264Z High Density 15 N N Steel Zinc YP 297 | M24308/4-265Z M2000/4-265Z High Density 26 N N Steel Zinc YP 298 | M24308/4-266Z M2000/4-266Z High Density 44 N N Steel Zinc YP 299 | M24308/4-267Z M2000/4-267Z High Density 62 N N Steel Zinc YP 300 | M24308/4-268Z M24308/4-268Z High Density 78 N N Steel Zinc YP 301 M24308/6-1Z M2000/6-1Z Standard 9 Socket N Brass Zinc YP 302 M24308/6-2Z M2000/6-2Z Standard 15 Socket N Brass Zinc YP 303 M24308/6-3Z M2000/6-3Z Standard 25 Socket N Brass Zinc YP 304 | M24308/6-42Z M2000/6-4Z Standard 37 Socket N Brass Zinc YP 305 M24308/6-5Z M2000/6-5Z Standard 50 Socket N Brass Zinc YP 306 M24308/6-6Z M2000/6-6Z Standard 9 Socket Y Brass Zinc YP 307 M24308/6-7Z M2000/6-7Z Standard 15 Socket Y Brass Zinc YP 308 M24308/6-82 M2000/6-8Z Standard 25 Socket Y Brass Zinc YP 309 M24308/6-9Z M2000/6-9Z Standard 37 Socket Y Brass Zinc YP 310 M24308/6-10Z M2000/6-10Z Standard 50 Socket Y Brass Zinc YP 311 M24308/6-281Z M2000/6-281Z Standard 9 N N Brass Zinc YP 312 | M24308/6-282Z M2000/6-282Z Standard 15 N N Brass Zinc YP 313 | M24308/6-283Z M2000/6-283Z Standard 25 N N Brass Zinc YP 314 | M24308/6-284Z M2000/6-284Z Standard 37 N N Brass Zinc YP 315 | M24308/6-285Z M2000/6-285Z Standard 50 N N Brass Zinc YP 316 M24308/6-11Z M2000/6-11Z High Density 15 Socket N Brass Zinc YP 317 M24308/6-12Z M2000/6-127 High Density %6 Socket N Brass Zinc YP 318 M24308/6-13Z M2000/6-13Z High Density 4A Socket N Brass Zinc YP 319 M24308/6-14Z M2000/6-14Z High Density 62 Socket N Brass Zinc YP 320 | M24308/6-15Z M2000/6-15Z High Density 78 Socket N Brass Zinc YP 321 M24308/6-17Z M2000/6-17Z High Density 15 Socket Y Brass Zinc YP 322 M24308/6-18Z M2000/6-18Z High Density 6 Socket Y Brass Zinc YPpproved Part List QPL Sr] Miltary | Manufacturers | = type | Position | Crime | 'R | she | Finish No. | Designation Designation Contact | Tool 323 | M24308/6-19Z M2000/6-19Z High Density 44 Socket Y Brass Zinc YP 324 | M24308/6-20Z M2000/6-20Z High Density 62 Socket Y Brass Zinc YP 325 | M24308/6-21Z M2000/6-21Z High Density 78 Socket Y Brass Zinc YP 326 | M24308/6-286Z M2000/6-286Z High Density 15 N N Brass Zinc YP 327 | M24308/6-287Z M2000/6-287Z High Density 26 N N Brass Zinc YP 328 | M24308/6-288Z M2000/6-288Z High Density 44 N N Brass Zinc YP 329 | M24308/6-289Z M2000/6-289Z High Density 62 N N Brass Zinc YP 330 | M24308/6-290Z M2000/6-290Z High Density 78 N N Brass Zinc YP 331 M24308/8-1Z M2000/8-1Z Standard 9 Pin N Brass Zinc YP 332 | M24308/8-2Z M2000/8-2Z Standard 15 Pin N Brass Zinc YP 333 | M24308/8-3Z M2000/8-3Z Standard 25 Pin N Brass Zinc YP 334 | M24308/8-4Z M2000/8-4Z Standard 37 Pin N Brass Zinc YP 335 | M24308/8-5Z M2000/8-5Z Standard 50 Pin N Brass Zinc YP 336 | M24308/8-6Z M2000/8-6Z Standard 9 Pin Y Brass Zinc YP 337 | M24308/8-7Z M2000/8-7Z Standard 15 Pin Y Brass Zinc YP 338 | M24308/8-8Z M2000/8-8Z Standard 25 Pin Y Brass Zinc YP 339 | M24308/8-9Z M24308/8-9Z Standard 37 Pin Y Brass Zinc YP 340 M24308/8-10Z M24308/8-10Z Standard 50 Pin Y Brass Zinc YP 341 | M24308/8-2592 M2000/8-259Z Standard 9 N N Brass Zinc YP 342 | M24308/8-260Z M2000/8-260Z Standard 15 N N Brass Zinc YP 343 | M24308/8-261Z M2000/8-261Z Standard 25 N N Brass Zinc YP 344 | M24308/8-262Z M2000/8-262Z Standard 37 N N Brass Zinc YP 345 | M24308/8-263Z M2000/8-263Z Standard 50 N N Brass Zinc YP 346 | M24308/8-11Z M2000/8-11Z High Density 15 Pin N Brass Zinc YP 347 | M24308/8-12Z M2000/8-12Z High Density 26 Pin N Brass Zinc YP 348 | M24308/8-13Z M2000/8-13Z High Density 44 Pin N Brass Zinc YP 349 | M24308/8-14Z M2000/8-14Z High Density 62 Pin N Brass Zinc YP 350 | M24308/8-15Z M2000/8-15Z High Density 78 Pin N Brass Zinc YP 351 | M24308/8-17Z M2000/8-17Z High Density 15 Pin Y Brass Zinc YP 352 | M24308/8-18Z M2000/8-18Z High Density 26 Pin Y Brass Zinc YPalo) |i RETENTION CLIP aes de FRONT INSERT: FRONT SHELL | SOCKET CONTACT REAR SHELL RETENTION CLIP PIN CONTACT FRONT INSERT REAR INSERT FRONT SHELL N |nsert Arrangement For Standard D-Sub Connectors 2 3 4 5 6 7 8 eooocoo ooocoocoo 6 06 5 5 o0o00 0900 8 9 10 11 12 13 14 15 9 positions 15 positions 9 10 11 12 13 ocodoodo 0 0 0000 ooo0o30dcde0ocemcUcmtmdmUmUOOUCOUCUCOOUCUCOUCO 14 15 16 17 18 19 20 21 22 23 24 2 25 positions 9 10 1 #12 13 14 15 16 #17 #18 19 060000000000 0 000 60 06 ooo0c0dcUChOWUchOWUlcO6UmOUMKOUCOUCOUMOUCOOUCOOUCOOUCOUCOOUlUO 20 21 22 23 24 25 26 27 28 29 30 3 32 33 M3 86 OT 37 positions 1,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ooooo oo cocUCcUCcmUCUCUMOUCOCUCMUOUCUOUCOOCUC go 000000000 OC OO 8 ODO O33 ooo0o00c00000000090 00 0 3435 36 37 38 39 40 41 42 43 44 45 46 4748 49 50 50 positions Insert Arrangement for High Density D Sub Connectors 12 3 4 3 6 7 8 g ooo0o9o0 ooo0o$o 69 0 0 0 O10 wooo 0 o o. 0 0 018 oooo0o$0d oo3o ooo W112 13 14 15 ie 20 oto oa 24 25 26 15 positions 26 positions 12 34 5 67 86 9 oooo0go 0 000 160 00000000000 0 0 030 0000000000000 0606 31.32.33 M4 35 36 37 (38 39 40 41 42 43 44 44 positions 12 3 4 5 6 7 89 10 1 12 13 14 15 16 17 18 19 20 21 ooo0o0o 00 0000000000000 00 2oooooo0mUlmUmcmlmUoWclmUOWlUOlodolUlcOCUCOoOUlUCOOCUCKOUCUOUCICUCOOUO UO UCO42 oooooo oo coc O90 OGCO GOO CO 8 43 44 #45 46 #47 48 49 5051 52 53 54 55 56 57 58 59 GO 61 62 3 62 positions 10 41 12 oo o* a 08 o ob o oo 020 ododcoddddoa moooooo0o0cmOomcUmCUMOUMOOULMKOCUCMOOULMOUCOULOUCOlCUCO UCO833 eo o ooo ooo ooo oo Oo 8 78 positions *eeeeeegeeegeegeeRNReNSD eeeeeeseeeeeeeeeeeeeee eeseegeeo een eee egee Ee O* eeegceeeeeeeeeeeeseeee a meSeSeeeeeeeeeessgsgeesgs && DD 104 <>ecommended PCB Layout For Standard D-Sub Connectors 24.99 11.08 [2.77 N t +o oes SS os 2-03.05, 1.0 : a? ok : 2.84 2.84 50 positions Mount Connector With Mating Face Positioned To Direction Of Arrowecommended PCB Layout For High Density Connectors MALE FEMALE 24.99 24.99 12.50 12.50 423 @ 546 a echo. Ay 15 PIN o eegee Thy Ww reaped 7 _ i) _72-8/0-0-0;,_ " iS 15 wi 2.29 TYP l 7 8 2.29 TYP i AL 2 J 33.32 33.32 Te6 a) - | 16.66 9.78 3 ecoe eal 26 PIN recccdece y A L) 10-0-0 8 2 Lt) - +- -,0-6-08 0 5 0? nee D + P . Stee 7 2.29 TYP A. g | 2.29 TYP I NX 3 47.04 47.04 23.52 16.51 . Lh... | Leeeeggepeceeeed- g9eg0eegeceecooL a cc ie a + 44 PIN & 6-0-0-0-0 6-0-0-0-6-0-0-606-6,4)- + (8888088 NN c 2.29 TYP 1.98 2.28 TYP 63.50 J 63.50 31.75 24.71 31.75 24.77 | | - 1.98 1.98 Ww > PE L28222P 2999292295 62 PIN ee 1 "8 0000 600 Colege Coe Re 0G; 728 0680888 6409080088005 p same | NS 2.41 TYP | NX | 30.58 22.94 8 8) 3 30.58 ; 22.94 \ 8 eco occccedeooceccee = ee ee ayo t8 e908 0009960000000 0 oe 1 #0009 000000009000000 04-7 WY mO SCO OOOO FOOD ROCA ON 28 666 056665 666666 606 667 2980860 6608 @600800000 n9 08066006 e68000Q 0g 3 2 2.41 TYP 8 = . 8 2.41 TYP c als N N 63.50 31.75 \ 24.56 ) 5.50 & 31.75 \ 24.92 } | ; 5 n 89ee600e0 BbeG0000000q "p90 000e 0880000 0000000|, eeceeesoeqgeeoeosooes, 104 PIN = BF9RRKCGRSF ESE COC ECR p- =0-0-0-0-0-60-60- 0-6-0-0-0-0-4 tp- 9-20-400600 0-6-0-0-8 0. 6-8-7 5 S8050 80500 Ge S SOS OSS S eseeeeeeepegeeegees 39088606000 eeeeee eee eecee060 e000 G E 2.41 TYP c 8 2.41 TYP N 1.C - 90.89 HOLE FOR CONTACT TERMINATION POSITION 2. MOUNT CONNECTOR WITH MATING FACE POSITIONED TO DIRECTION OF ARROW <>eceptacle Connector With Polarized Shell & Socket Crimp Contact 3.63 MIN. 9 3.050.153 STD-THROUGH HOLE. f +i+_. \ a [Feed >: t it \ WZ HG 1 + TI iE m " SHELL] NO. OF] at BY eu 'p ef fe y y' 'T SIZE PIN 1 09 30.43 | 16.21 24.87 19.02 0.51 31.19 | 16.46 | 25.12 19.53 1.02 2 15 38.76 | 24.54 | 33.20 27.25 0.51 39.52 | 24.79 | 33.45 27.76 1.02 3 25 52.65] 38.25 | 46.91 7.77 12.17 | 10.64 6.05 41.02 | 10.46 0.89 0.74 3.42] 38.51 47.17 8.03 12.93 | 11.15 6.30 41.53 | 10.97 1.52 1.25 4 37 68.94] 54.71 63.37 57.45 0.74 69.70| 54.97 | 63.63 57.96 1.25 5 50 66.55] 52.30 | 60.99 10.62 14.99 55.07 13.31 0.74 67.31] 52.55 | 61.24 | 10.87 | 15.75 5.58 | 13.82 1.25 Plug Connector With Polarized Shell & Pin Crimp Contact - 2 K r {t ~ 4 | 8 A CGdlbee) 2 h ((-$- -o-} hy]. * N ee NT? / L i TT TF UU $ 3.0540.13 ce (2 HOLES) STDTHROUGH HOLE. SHELL] NO. OF ta? tp? tw tr tc? 4 ta Opa? a4? ts as SIZE PIN A B c D E F G H J K L 1 09 30.43 | 16.79 | 24.87 10.46 5.82 19.02 0.89 0.51 31.19 | 17.04 | 25.12 10.97 6.12 19.53 1.52 1.02 2 15 | 38:76 | 25.12 | 33.20 10.46 | 5.82 | 27.25 0.89 | 0.51 39.52 | 25.37 | 33.45 10.97 6.12 27.76 1.52 1.02 3 25 52.65 | 38.84 | 46.91 8.23 12.17 | 10.57 41.02 | 10.46 1.27 0.74 53.42 | 39.09 | 47.17 | 8.48 12.93 | 11.07 41.53 | 10.97 1.78 1.25 4 37 68.94 | 55.30 | 63.37 10.57 5.99 57.45 1.27 0.74 69.70 | 55.55 | 63.63 11.07 5.67 57.96 1.78 1.25 5 50 66.55 | 52.68 | 60.99 | 11.07 | 14.99 | 10.57 55.07 | 13.31 1.27 0.74 67.31 | 52.93 | 61.24 | 11.33 | 15.75 | 11.07 55.58 | 13.82 1.78 1.25eceptacle Connector With Polarized Shell & Socket Crimp Contact-High Density 2 K oS H ( 3 6 . a 7 NK 3,050.13 2 HOLES: ct " STD-THROUGH HOLE. W SHELL] NO. OF| *, pg c p' ef pt g Hy yt * og SIZE | PIN : 45 [90-43 | 16.21 | 24.87 19.02 0.51 31.19 | 16.46 | 25.12 19.53 1.02 2 26 38.76 | 24.54 | 33.20 27.25 0.51 39.52 | 24.79 | 33.45 27.76 1.02 3 44 52.65 | 38.25 | 46.91 7.77 12.17 | 10.64 6.05 | 41.02 | 10.46 0.89 0.74 53.42 | 38.51 | 47.17 | 8.03 | 12.93 | 11.15 | 630 | 41.53 | 1097 | 1.52 | 1.25 4 g2 | 08:94] 54.71 | 63.37 57.45 0.74 69.70 | 54.97 | 63.63 57.96 1.25 5 7 | 88:55 | 52.30 | 60.99 | 10.62 | 14.99 55.07 | 13.31 0.74 67.31 | 52.55 | 61.24 | 10.87 | 15.75 55.58 | 13.82 1.25 $ 3.0520.13 STD-THROUGH HOLE. nH SHELL] NO. OF) 4+ Br C p e '- @ 'yW y * 'L SIZE PIN 1 15 30.43 | 16.79 | 24.87 10.46 | 5.82 | 19,02 0.89 0.51 31.19 | 17.04 | 25.12 10.97 | 6.12 | 19.53 1.52 1.02 2 26 38.76 | 25.12 | 33.20 10.46 | 5.82 | 27.25 0.89 0.51 39.52 | 25.37 | 33.45 10.97 | 6.12 | 27.76 1.52 1.02 3 44 52.65 | 38.84 | 46.91 | 8.23 12.17 | 10.57 41.02 | 10.46 | 1.27 0.74 53.42 | 39.09 | 47.17 | 8.48 12.93 | 11.07 41.53 | 10.97 | 1.78 1.25 4 62 68.94 | 55.50 | 63.37 10.57 | 5.99 | 57.45 1.27 0.74 69.70 | 55.55 | 63.63 11.07 | 5.67 | 57.96 1.78 1.25 5 78 66.55 | 52.68 | 60.99 | 11.07 | 14.99 | 10.57 55.07 | 13.31 1.27 0.74 67.31 | 52.93 | 61.24 | 11.33 | 15.75 | 11.07 55.58 | 13.82 | 1.78 1.25ontact Information For Standard D-Sub CRIMP CONTACTS Closed crimp barrel FEMALE CONTACT ("CLOSED ENTRY") DESIGN) MALE CONTACT A | A % Colour Code 0.040 g Colour Code Y + (1,02) YI _ _ ' BG > BO , | i ~T t Stainless Steel Shroud 0.170 0.170 c@ Li) ce (4,32) (4,32) Material - Copper Alloy. Material - Brass Plating - Gold flash over nickel or Plating - Gold flash over nickel or 0.000050 inch (1,25 ) gol@over copper for 0.000050 inch (1,25z4) gold over copper for military specification contacts. military specification contacts. * Colour Code - ORANGE / BLUE / GREY for military * Colour Code - ORANGE / BLUE / WHITE for military specification contacts specification contacts WIRE SIZE WIRE SIZE PART NO. A B PART NO. A B (AWG (MM) % Ce (AWG (MM) ce M2000-107687 20/22/24 0.538 | 0.044 | 0.066 M2000-107688 20/22/24 0.550 | 0.044 | 0.066 (0,5/0,3/0,25) | (13,67) | (1,12) | (1,68) (0,5/0,3/0,25) | (13,97) | (1,12) | (1,68) M2000-109979 26/28/30 0.538 | 0.027 | 0.066 M2000-109980 26/28/30 0.550 | 0.027 | 0.066 (0,12/0,08/0,5) | (13,67) | (0,69) | (1,68) (0,12/0,08/0,5) | (13,97) | (0,69) | (1,68) *M139029/63-368 20/22/24 0.538 | 0.044 | 0.066 *139029/64-369 20/22/24 0.550 | 0.044 | 0.066 (0,5/0,3/0,25) | (13,67) | (1,12) | (1,68) (0,5/0,3/0,25) | (13,97) | (1,12) | (1,68) Crimp contacts can be supplied in kit with connector or ordered separately. Contact Information For High Density D-Sub CRIMP CONTACTS Closed crimp barrel A Hl | A % Colour Code 0.030 ic al x t Lt \ BO Gar) Stainless Stee! Shroud Material - Copper Alloy. Material - Brass Plating - Gold flash over nickel or Plating - Gold flash over nickel or 0.000050 inch (1 25) gold over copper for 0.000050 inch (1 25M) gold over copper for military specification contacts. * military specification contacts. Colour Code - ORANGE/GREEN/YELLOW for military Colour Code - ORANGE / BLUE / BLACK for military specification contacts specification contacts WIRE SIZE WIRE SIZE PART NO. A |B Cc PART NO. A |B Cc (AWG (MM) 8 g (AWG (MN) % % 22/24/26/28 0.518 | 0.035 | 0.047 22/24/26/28 0.531 | 0.035 | 0.047 M2000-107294 M2000-105794 (0,3/0,25/0,12/0,08/0,05) |(13,16)] (0,89) | (1,19) (0,3/0,25/0,12/0,08/0,05) |(13,49)| (0,89) | (1,19) 22/24/26/28 0.518 | 0.035 | 0.047 22/24/26/28 0.531 | 0.035 | 0.047 *M39029/57-354) *M39029/58-360 (0,3/0,25/0,12/0,08) |(13,16)| (0,89) | (1,19) (0,3/0,25/0,12/0,08) |(13,49)| (0,89) | (1,19) Crimp contacts can be supplied in kit with connector or ordered separately. 21rimping Information For Standard / High Density Series Crimp Contacts Wire insulation Typ. Crimp to meet recommended tensile strength es yp Correctly crimped >A Strands visible beyond insulation support Stripped wires compressed for improved conduction For all tools : - Strands to be visible through the inspection hole - Strands not to be visible beyond the insulation support - Check for peeled gold and bent contact Crimp indents too close to inspection hole Strands not visible through inspection hole Cross section of correctly crimped contact 8 crimp indents Amphenol recommended tools for Standard / High Density Series Contact &>Special Productsrdering information For Solder Type Standard D-Sub Connector (Non Environmental) M2000/_ XX X XX X Series: M2000 | Special Option Connector Type : 1 - Receptacle Connector (Nil for standard version) with Solder Type Contact . ( Fixed Contacts) Finish 3 - Plug Connector with Solder Type Contact Shell Size ( Fixed Contacts) Connector Type Shell Size: 1-9pin Finish: + F- Cadmium plate with : 2-15 pin yellow passivation, Series 3-25 pin Z - Zinc Plated, Manufacturers Logo 4-37 pin N - Nickel Plated, 5-50 pin T - Tin Plated Special Option: | L- Launch vehicle application Plug Connector With Solder Contact K G 2 B . . i dL 7 i + s ru ) Ts. . 4 y ul ch Wl --$-ore- |) hl. L = Y Ueoe+ J Y tHt= > as TT u 1 i A # / Sy i A A 1.24 MAX, 9.91 MAX. 9.91 MAX. STDTHRU. HOLE (09 TO 37 PIN) (80 PIN) sp. | CONNECTOR [SHELL <4. se lelo le leilelwtlw ills 30.43 | 16.79 | 24.67 10.48 19.02 0.51 1 | MZ000/3-1F | 09 | S1'49 | 17,04 | 25.12 10.97 19.83 ona |_1.02 38.76 | 25.12 | 33.20 10.46 27.25 1.52 [0.81 2 | M2000/3-2F | 15 | 36.9 | 25.37 | 33.45 10.97 27.76 1.02 52.65 | 38.64 | 46.91 | 8.23 | 12.17 | 10.57 | 5.82 | 41.02 | 10.46 0.74 3 | M2000/3-3F | 25 | 534 | 30.09 | 47.17 | 8.48 | 12.03 | 11.07 | 6.05 | 41.53 | 10.97 1.25 68.04 | 55.30 | 63.37 10.57 57.45 1.27 | 0.74 4 | M2000/3-4F | 37 | 69:70 | 55.55 | 63.63 11.07 57.96 1:78 | 1.25 66.55 | 52.68 | 60.99 | 11.07 | 14.99 | 10.57 55.07 | 13.31 0.74 5 | Mz000/3-5F | 50 | 6731 | 52.93 | 61.24 | 11.33 | 15.75 | 11.07 55.58 | 13.82 1.25 Receptacle Connector With Solder Contact K 9 8 a \ 3 T Ll 2s 7 ul a +e 1.24 Max, | | (09 To 37 PIN) STD-THRU, HOLE sk CONNECTOR SHELL "at BY 'c D e pe ' Hy yw "K* 1 | 2000/1-1F | op | 3043 | 10.21 | 2487 19.02 0.51 31.19 | 16.46 | 25.12 19.53 1,02 38.76 | 24.54 | 33.20 27.25 0.51 2 | M2000/1-2F | 15 | 39:52 | 24.79 | 33.45 27.76 1.02 52.65 | 58.25 | 46.91 | 7.77 | 12.17 | 10.64 | 6.05 | 41.02 | 10.48 | 0.89 | 0.74 3 | M2000/1-3F | 25 | 53'42 | 38.51 | 47.17 | 8.03 | 12.93 | 11.15 | 6.30 | 41.53 | 10.97 | 1.62 | 1.25 68.04 | 54.71 | 63.37 57.45 0.74 4 | M2000/1-4F | 37 | 69.70 | 54.97 | 63.63 57.96 1.25 66.55 | 52.30 | 60.99 | 10.62 | 14.00 5.07 | 13.31 0.74 5 | M2000/1-SF | 50 | 67'51 | 52:55 | 61.24 | 10.87 | 15.75 55.58 | 13.62 1.28@ M2000/ X X X X X rdering Information For Standard D-Sub Grommet Type Connector (Crimp Type Contact) Series: M2000 | Connector Type : 4 - Plug Connector with Pin Contact Special Option (Nil Crimp Type, Rear Release, for standard version) Rear Removable Plating Finish 2 - Socket Connector with Socket g Contact Crimp Type, Rear Grommet Type Release, Rear Removable Shell Size Grommet Type: _G_ Silicon Elastomer Grommet Shell Size : 1-9 pin Finish: F-Cadmium plate with Connector Type 2-15 pin yellow passivation Series 3-25 pin Z- Zine Plated, 4-37 pin N - Nickel Plated, Manufacturers 5-50 pin T - Tin Plated Logo Special Option: |= L- Launch vehicle application Plug Connector With Pin Contact (With Grommet) - Rear Removable @ 3.05+0.13 STD-THROUGH HOLE. Sr. | CONNECTOR | SHELL| A *B' Cc D Ee *F G H! J *K NO. NO. SIZE }0.13 | 2013 [2013 [2038 [2025 |40.38 |4+025 | 20.25 | 2015 | 20.25 1 | @m2000/4-1GF 1 16.92 8.36 24.99 | 30.81 19.28 | 1255 | 10.72 10.72 | 5.97 0.76 2 | m20004-26F 2 | 25.25 8.36 33.32 | 39.14 | 27.51 | 1255 | 10.72 10.72 | 5.97 0.76 3 | @m2000/4-3GF 3 38.96 8.36 47.04 | 53.04 | 41.30 | 1255 | 10.72 10.72 | 5.97 0.76 4 | @m200044Gr 4 55.42 8.36 63.50 | 69.32 | 57.71 | 1255 | 10.72 10.82 | 5.84 0.99 5 | @M2000/4-5GF 5 52.81 11.20 | 61.11 | 66.93 | 5532 | 15.37 | 13.56 10.82 | 5.84 0.99 Receptacle Connector With Socket Contact (With Grommet) - Rear Removable 10.9020.25 @ 3.0540.13 STD-THROUGH HOLE. Sr. | conNEcTOR |SHELL) *A "B' C D E oe NO. NO. SIZE | +0.13 + 0.13 + 0.13 + 0.38 + 0.25 + 0.38 0.25 @M2000/2-1 GF 1 16.33 7.90 24.99 30.81 19.28 12.55 10.72 2 M2000/2-2GF 2 24.66 7.90 33.32 39.14 27.51 12.55 10.72 3 @M2000/2-3GF 3 38.38 7.90 47.04 53.04 41.30 12.55 10.72 4 @M2000/2-4GF 4 54.84 7.90 63.50 69.32 57.71 12.55 10.72 5 @M2000/2-5GF 5 52.43 10.74 61.11 66.93 55.32 15.37 13.56ORDERING INFORMATION STRAIGHT PC TAIL TYPE CONNECTORS 2000 / 24 - xx L_ CN - WITH CLINCH NUT (4-40UNC) IF - WITH INTERFAACIAL SEAL IFCN - WITH INTERFACIAL SEAL & CLINCH NUT FS - FEMALE SCREWLOCK (JACKPOST) MS - MALE SCREWLOCK L - LAUNCH VEHICLE OPTION FINISH CONNECTOR TYPE: 23 - RECEPTACLE CONNECTOR (PC TAIL TYPE) 24 -PLUG CONNECTOR (PC TAIL TYPE) FINISH F - CADMIUM YELLOW PASSIVATED Z - ZINC YELLOW PASSIVATED K - ZINC NICKEL FINISH T - NICKEL PTFE FINISH rdering Information For Straight PC Tail Type Connector (Plug Connector) SHELL SIZE (1, 2, 3, 4) TI - TIN PLATED CONNECTOR TYPE NOTE: SERIES 1. BRASS BUSH (SPACER) WILL BE SUPPLIED LOOSE WITH THIS CONNECTOR MANUFACTURER LOGO (NOT APPLICABLE FOR CONNECTOR WITH CLINCH NUT) K PIN 4 @3.0540.13 ~ (2 HOLES) ( | Ls a ; ||| Y " ih jt (60 PIN) (09 TO 37 PIN DIMENSION TABLE (PLUG CONNECTOR) SR.| CONNECTOR Shell J = nN c D 'e - y L NO] part No. |Size Nb of Ens 1 1 30.43 24.87 10.46 0.51 M2000/24-1F 09 | 31.19 25.12 10.97 4.02 2 orl 2 | ts | 3876 33.20 10.46 0.51 Mz000/24-2F 39.52 33.45 10.97 4,02 52.65 46.91 | 8.23 | 12.17 |140.57 10.46 0.74 3 |M2a00/24-3F | 3 | 25 | 55.4 47.17 | 8.48 |12.93| 11.07 10.97 1.25 68.94 63.37 10.57 0.74 4 |ma0oo4aF | 4 | 37 | Go 79 | pad ties 125 | 66.55 60.99 | 44,07 | 14.99 | 10.57 13.31 0.74 5 |M2oo0r4-5F | 5 | 8 | 6734 61.24 | 14.33 [15.75 111,07 13,82 4.25 For Straight PC Tail Type Connector (Receptacle) PIN 1 4 3.0540.13 4 (2HOLES) \ a (50 PIN (09 TO 37 PIN) DIMENSION TABLE (RECEPTAC NECTOR) SR. CONNECTOR Shell =r Blo] ol] & HW. KL NO] PART NO. |Size | No. of Pins 16.21 | 24.87 19.02 0.51 1 |m2o00/23-1F | 1 | 09 16.46 | 25.12 19.53 4,02 24.54 | 33.20 27.25 0.51 2 oF} 2 | 45 M2000/23-2F 24.79 | 33.45 27.78 4.02 38.25 |46.91 | 7.77 |12.17 41.02 0.89 | 0.74 3 |M2000/23-3F | 3 | 26 38.51 [47.17 | 8.03 | 12.93 41.53 4.52 | 1.25 34.71 | 63.37 57.45 0.74 4 |M2000/23-4F | 4 | 37 | 54.97 |63.63 57.96. 1.25 52.30 |60.99 | 10.62 | 14.99 55.07 0.74 5 |M20o0/23-eF | 5 | 50 52.55 161.24 | 10.87 | 15.75 55.58 1.25 8 S INTERFACIAL z GLINGH NUT \ Ss (4-400UNC) a a Th BRASS BUSH a | 1 | 1 2NOS. = wo] ! rd 3.20 3.75+0.02 CONNECTOR WITH BRASS BUSH PLUG CONNECTOR. WITH INTERFACIAL SEAL CONNECTOR WITH CLINCH NUT (4 - 400UNC THREAD) a>rdering Information For Straight PC Tail Type Connector (Plug Connector) ORDERING INFORMATION STRAIGHT PC TAIL TYPE CONNECTORS CONNECTOR TYPE: m2000 / 24 - XX F XOK 23 - RECEPTACLE CONNECTOR (PC TAIL TYPE) 24 -PLUG CONNECTOR (PC TAIL TYPE) CN - WITH CLINCH NUT (4-40UNC) IF - WITH INTERFAACIAL SEAL FINISH IFCN - WITH INTERFACIAL SEAL & CLINCH NUT FS - FEMALE SCREWLOCK (JACKPOST) F - CADMIUM YELLOW PASSIVATED MS - MALE SCREWLOCK Z - ZINC YELLOW PASSIVATED L LAUNCH VEHICLE OPTION K - ZINC NICKEL FINISH SHELL SIZE (7, 8, 9, 10, 11) T - NICKEL PTFE FINISH CONNECTOR TYPE vorelN PLATED SERIES 1. BRASS BUSH (SPACER) WILL BE SUPPLIED LOOSE WITH THIS CONNECTOR MANUFACTURER LOGO (NOT APPLICABLE FOR CONNECTOR WITH CLINCH NUT) PIN 4 3 3.0540.13 4-* /(@ HOLES) c Ht Y cy 1 G b i | fa WY vy | ie (09 TO 37 PIN) DIMENSION TABLE (PLUG CONNECTOR) SR.| CONNECTORShell a W eB c 'D e - ela} ow *. LV. NO! PART NO, |Size | No. of Pins 1 1 30.43 | 16.79 | 24.87 10.46 19.02 0.51 M2000/24-7F 09 | 31.19 } 17.04 } 25.12 10.97 19.53 1.02 2 ep | 2 | 15 | 38-76 | 25.12 |33.20 10.46 27.25 0.89 |o.51 M2000/24-8F 39.52 | 25.37 | 33.45 10.97 27.76 1.52 | 4.02 52.65 | 38.84 | 46.91 | 8.23 | 12.17 | 49.57) 5.82 |41.02] 10.46 0.74 3 |M20a0/24-0F | 3 | 25 | 5342 | 39,09 [47.17 | 8-48 |12-93| 11.07 6-05 41.53] 10.97 4.25 68.94 | 55.30 | 63.37 10.57 57.45 1.27 0.74 4 |M2oo024-10F] 4 | 37 | 6070 |ss.55 |ea63 i107 173/125 | 66.55 |52.65 | 60.99 | 11.07 | 14.99 |10.57 55.07) 13.31 0.74 5 |Mzo00/24-11F/ 5 | 5 | 6731 [52.93 |61.24 | 14.33 | 15.75 [11.07 55.58] 13.82 1.25 For Straight PC Tail Type Connector (Receptacle) @3.05+0.13 PIN (ZHOLES)\ a (09 TO 37 PIN) DIMENSION TABLE (RECEPTACLE CONNECTOR) SR.) CONNECTOR |Shell ay wl) ele] ole] rl elwlw fe] NO! PART No. |Size | No. of Pins + luaoooa7e | 1 | o@ | 3043 [16.21 [24.87 0.51 . 31.19 | 16.46 | 25.12 1.02 2 acl 2 | 15 | 38-76 |24.54/33.20 0.51 M2000/23-6F 39.52 |24.79 133.45 1.02 52.65 |38.25 | 46.91 | 7.77 | 12.17] 10.64) 6.05 10.46 |0.89 | 0.74 3 |Mzoo0/23-0F | 3 | 26 | 55.42 |3851 47.17 | 8.03 |12.93] 11.15 |6.30 10.97 | 1.52 | 1.25 68.94 | 34.71 | 63.37 0.74 4 |M2oo023-10F] 4 | 37 | 607 |s497 |e3.a 195 66.55 | 52.30 | 60.99 | 10.62 |14.99 13.31 0.74 5 |M2co023-41F] | 50 | 67.31 |52.55 61.24 | 10.87 | 15.75 13,82 4.25 N INTERFACIAL g 3 a atm rrp aeass aust J | i! iti /" 2Nos. = T 3.20 3.75+0.02 _PLUG CONNECTOR. NNECTOR WITH Bi BUSH WITH INTERFACIAL SEAL CONNECTOR WITH CLINCH NUT (4 - 4900UNC THREAD) ardering Information For Straight PC Tail Type Connector (Plug) ORDERING INFORMATION STRAIGHT PC TAIL TYPE CONNECTORS F XXxxx L_ CN - WITH CLINCH NUT (4-40UNC) IF - WITH INTERFAACIAL SEAL IFCN - WITH INTERFACIAL SEAL & CLINCH NUT FS - FEMALE SCREWLOCK (JACKPOST) MS - MALE SCREWLOCK L - LAUNCH VEHICLE OPTION FINISH 2000 / 24 - xx SHELL SIZE (13, 14, 15, 16, 17) CONNECTOR TYPE SERIES MANUFACTURER LOGO PIN 3.0540.13 h (2 HOLES) la Ht x chy t . ees yy * CONNECTOR TYPE: 23 - RECEPTACLE CONNECTOR (PC TAIL TYPE) 24-PLUG CONNECTOR (PC TAIL TYPE) FINISH F - CADMIUM YELLOW PASSIVATED Z- ZINC YELLOW PASSIVATED K - ZINC NICKEL FINISH T - NICKEL PTFE FINISH TI- TIN PLATED NOTE: 1. BRASS BUSH (SPACER) WILL BE SUPPLIED LOOSE WITH THIS CONNECTOR (NOT APPLICABLE FOR CONNECTOR WITH CLINCH NUT) 1.0% 0.02 5.3440.20 {50 PIN) {09 TO 37 PIN) DIMENSION TABLE (PLUG CONNECTOR) SR. CONNECTOR Shell }S%9- w lowell eo olelelelelese lel ou NO] part no. [Size No. of Pins 30.43 | 16.79 | 24.87 10.46 19.02 0.51 1 _ 1 M2000/24-13F 08 [1.19 | 17.04 | 25.12 10.97 19.53 4.02 0.89 2 . 2 45 | 38.76 | 25.12 | 33.20 10.46 27.25 0.51 M2000/24-14F| 39.52 | 25.37 | 33.45 10.97 27.76 1.52 | 4.02 52.65 | 38.84 | 46.91 | 8.23 |12.17|49,57) 5-82 141.02] 10.46 0.74 3 | M2000/24-15F| 8 25 53.42 [39.09 | 47.17 | 8.48 | 12.93 | 41.07] 6-05 |41 53] 10.97 1.25 68.94 | 55.30 | 63.37 10.57 57.45 1.27 10.74 4 |M2000/24-16F| 4 37 __ | 6970 |ss55 16363 11.07 1.78 14,25 | 66.55 | 52.65 | 60.99 | 11.07 | 14.99 | 10.57 55.07| 13.31 0.74 5 |Mzoo0/2417F] 8 | 50 | 67.34 |52.93 |61.24 | 11.33 | 15.75 111.07 55.58] 13.82 4.25 For Straight PC Tail Type Connector (Receptacle) #3.050.13 2 HOLES) (09 TO_37_PIN) DIMENSION TABLE (RECEPTACLE CONNECTOR) Std. SR.] CONNECTOR|Shell Donal Ww Be c D e . eo lad) ow . re NO] PART NO. |Size | No. of Pins + |weooo3-13F| 1 og | 30-43 | 16.21 | 24.87 0.51 - 31.19 | 16.46 | 25.12 1.02 2 2 45 | 38.76 | 24.54 | 33.20 0.51 M2000/23-14F| 39.52 | 24.79 | 33.45 1.02 52.65 |38.25 | 46.91 | 7.77 | 12.17] 10.64) 6.05 10.46 |0.89 | 0.74 3 |Mz000/23-15F| $ | 26 | 53.42 |3851|47.17 | 8.03 |12.93] 11.15 |6.30 10.97 | 1.52 | 1.25 68.94 | 34.71 | 63.37 0.74 4 |M2000/23-16F| 4 37 __| 6970 [sae7 16363 125 66.55 | 52.30 | 60.99 | 10.62 | 14.99 13.31 0.74 5 |M2co0/23-17F] 8 | 80 | 67.31 |52.55 |61.24 | 10.87 | 15.75 13,82 4.25 g INTERFACIAL NCH NUT & BRASS BUSH 2NOS. 6.00 | CONNECTOR WITH BRASS BUSH PLUG CONNECTOR WITH INTERFACIAL SEAL (440uNc) Se CONNECTOR WITH CLINCH NUT (4 - 400UNC THREAD) <p>rdering Information For Straight PC Tail Type Connector (Plug) ORDERING INFORMATION STRAIGHT PC TAIL TYPE CONNECTORS @ M2000 / 24 XX F XXXX LL CN - WITH CLINCH NUT (4-40UNC) IF - WITH INTERFACIAL SEAL IFCN - WITH INTERFACIAL SEAL & CLINCH NUT FS - FEMALE SCREWLOCK (JACKPOST) MS - MALE SCREWLOCK L - LAUNCH VEHICLE OPTION FINISH CONNECTOR TYPE: 23 - RECEPTACLE CONNECTOR (PC TAIL TYPE) 24-PLUG CONNECTOR (PC TAIL TYPE) FINISH F - CADMIUM YELLOW PASSIVATED Z - ZINC YELLOW PASSIVATED K - ZINC NICKEL FINISH T - NICKEL PTFE FINISH TI - TIN PLATED SHELL SIZE (19, 20, 21, 22, 23) CONNECTOR TYPE NOTE: SERIES 1. BRASS BUSH (SPACER) WILL BE SUPPLIED LOOSE WITH THIS CONNECTOR MANUFACTURER LOGO {NOT APPLICABLE FOR CONNECTOR WITH CLINCH NUT) c 4K PIN 1 B @3.05+0.13 (2 HOLES) . __ | = KN (50 PIN) (09 TO 37 PIN) DIMENSION TABLE (PLUG CONNECTOR) SR. CONNECTOR'Shell ae A 'B D> 'e ' e |. yp K. L NO! part No, |Size No of Bhs + |mooooetor| 1 30.43 | 16.79 | 24.87 10.46 19.02 0.51 09 31.19 | 17.04 | 25.12 10.97 19.53 1,02 38.76 | 25.12 | 33.20 10.46 27.25 0.89 | 0.54 2 2 15 M2000/24-20F 39.52 | 25.37 |33.45 10.97 27.76 1.52 | 4.02 52.65 | 38.84 |46.91 | 8.23 |12.17 40.57) 5-82 |41.02] 10.46 0.74 3 |M2000/24-21F| 3 25 53.42 |39.09 [47.17 | 8.48 | 12-93] 141.07] 6-05 |41.53] 10.97 1.25 68.94 | 55.30 | 63.37 10.57 1.27 | 0.74 4 |M2oooi24-22F| 4 | 37 | 69.70 | 55.55 |ea.s3 11.07 1.78 | 1.25 | 66.55 | 52.65 | 60.99 | 11.07 | 14.99 | 10.57 13.31 0.74 5 |M2000/24-23F| 5 50 67.31 [52.93 [61.24 | 14,33 | 15.75 |11.07 13.82 1.25 For Straight PC Tail Type Connector (Receptacle) #3,0540.13 HOLES) '50_PIN {09 To 37 PIN) DIMENSION TABLE (RECEPTACLE CONNECTOR) : Sid. SR CONNECTOR SHELL | w BT Cr Db 'e '- Ww y w NO. | PART NO. SIZE | Pensty + | w2000/23-19F| 1 og 043 | 18:21 | 2487 19.02 051 31.19 | 16.48 | 25.12 19.53 1.02 2 | w2000/23-20F| 2 38.76 | 24.54 | 33.20 27.25 0.51 2000/; 15 | 39.52 | 24.79 | 33.45 27.78 1.02 3 | w2000/23-21F| 5 ng | 82:85] 38:25 | 48.01 | 7.77 | 12.17 | 10.64 | 8.05 | 41.02 | 10.48 | 0.88 | 0.74 83.42 | 3.51 | 47.17 | 8.03 | 12.93 | 11.15 | 6.30 | 41.53 | 10.97 | 1.52 | 1.25 4 | w2000/23-20F| 4 xy | eae | 5471 | 83.37 57.45 0.74 69.70 | 54.97 | 63.63 57.98 1.25 5 | w2000/23-23F| 5 so | 8555 82:30 | soe | 10.62 | 14.99 85.07 | 13.31 0.74 67.31 | 52.55 | 61.24 | 10.87 | 15.75 55.56 | 13.82 1.25 8g 8 SEAL q x a 2 y s Le 3 | I BRASS BUSH os i tit => T CONNECTOR WITH BRASS BUSH PLUG CONNECTOR WITH_INTERFACIAL SEAL <p> CONNECTOR WITH CLINCH NUT _(440UNC_ THREAD)rdering Information For High Density Straight PC Tail Type Connector (Plug) ORDERING INFORMATION PC TAIL TYPE (L=4.00MM) CONNECTORS CONNECTOR TYPE: M2000 / 24 XX XXX 23 - RECEPTACLE CONNECTOR (PC TAIL TYPE) 24 -PLUG CONNECTOR (PC TAIL TYPE) L_en-wit cunc Nur (4-40UNC) IF - WITH INTERFAACIAL SEAL FINISH IFCN - WITH INTERFACIAL SEAL & CLINCH NUT F - CADMIUM YELLOW PASSIVATED FS - FEMALE SCREWLOCK (JACKPOST) 2 -ZING YELLOW PASSIVATED L- LAUNCH VEHICLE OPTION FINISH K- ZINC NICKEL FINISH T - NICKEL PTFE FINISH SHELL SIZE (61, 62, 63, 64, 65) Tle TIN PLATED CONNECTOR TYPE NOTE: SERIES 1. BRASS BUSH (SPACER) WILL BE SUPPLIED LOOSE WITH THIS CONNECTOR MANUFACTURER LOGO (NOT APPLICABLE FOR CONNECTOR WITH CLINCH NUT) For Straight PC Tail Type Connector (Plug) (2 HOLES) | (78 PIN) (15 TO 62 PIN) SR. wlele 30.43 | 16.79 | 24.87 10.46 1 |M2000/24-61 18 | 31.19 | 17.04 | 25.12 10.97 a6 | 38.76 | 25.12 | 33.20 10.46 44 52.65 | 38.84 | 46.91 | 8.23 | 12.17) 19.57 1.02] 10.46 8.48 | 12.93 1.53] 10.97 4 a | a2 | 6894 [55.0 | 63.37 10.57 5 5 | 7 | 05-55 |52.68 | 60.99 | 11.07 1499 10.57 13.31 For Straight PC Tail Type Connector (Receptacle) oC PIN4 +4K 3.0540.13 'B (2 HOLES) \ iH > bh fae q WT 9 KE (15 TO 62 PIN) DIMENSION TABLE (RECEPTACLE CONNECTOR) SR.] CONNECTORShell L Ww e c D e e eo lad ow ke LoL. NO] part no. |Size Pansy 30.43 | 16.21 | 24.87 0.51 1 trl 1 aa M2000/23-61F 18 | 31.19 | 16.46 | 25.12 4,02 Oe 38.76 | 24.54 | 33.20 051 DE 2 gor] 2 | 26 POD M2000/23-62F 39.52 | 24.79 | 33.45 4,02 52.65 | 38.25 | 46.91 | 7.77 | 12.17] 10.46 | 8.05 53.42 | 38.51 | 47.17 | 8.03 | 12.93] 11.15 | 6.30 10.46 | 0.89 | 0.74 10.97 |1.52 | 1.25 3 |M2000/23-63F| 3 44 68.94 | 34.71 | 63.37 0.74 4 |M2000/23-64F] 4 62 | 6970 |sao7 les63 125 66.55 | 52.30 | 60.99 | 10.62 | 14.99 13.31 0.74 5 |M2oo0/23-65F) 5 | 78 | 6731 | 52.55 |61.24 | 10.87 | 15.75 13,82 4.25 8 INTERFACIAL 3 SEAL 5 3 __ = PLUG CONNECTOR NNECTOR WITH BRASS BUSH WITH INTERFACIAL SEAL a WITH GLINGH NUT (4 - 400UNC THREAD) <>rdering Information For High Density Straight PC Tail Type Connector ORDERING INFORMATION STRAIGHT PC TAIL TYPE CONNECTORS @ M2000 / 24 XX F XXXX LL CN - WITH CLINCH NUT (4-40UNC) IF - WITH INTERFACIAL SEAL IFCN - WITH INTERFACIAL SEAL & CLINCH NUT FS - FEMALE SCREWLOCK (JACKPOST) MS - MALE SCREWLOCK L - LAUNCH VEHICLE OPTION FINISH SHELL SIZE (67, 68, 69, 70, 71) CONNECTOR TYPE SERIES MANUFACTURER LOGO (2 HOLES) (45 TO 62 PIN) DIMENSION TABLE (PLUG CONNECTOR) CONNECTOR TYPE: 23 - RECEPTACLE CONNECTOR (PC TAIL TYPE) 24-PLUG CONNECTOR (PC TAIL TYPE) FINISH F - CADMIUM YELLOW PASSIVATED Z - ZINC YELLOW PASSIVATED K - ZINC NICKEL FINISH T - NICKEL PTFE FINISH TI- TIN PLATED NOTE : 1. BRASS BUSH (SPACER) WILL BE SUPPLIED LOOSE WITH THIS CONNECTOR (NOT APPLICABLE FOR CONNECTOR WITH CLINCH NUT) a L | (78 PIN) SR. CONNECTORShell i L " B c ole |e olu.low lal ou NO] part no. |Size WPensiy + Iweooome-e7r| 1 30.43 | 16.79 | 24.87 10.46 19.02 051 : 15 __| 31.19 | 17.04 | 25.12 10.97 19.53 1.02 0.89 9 sort 2 | 26 | 98-76 |25.12|33.20 10.46 27.25 051 M2000/24-68F| 39.52 | 25.37 | 33.45 10.97 27.76 1.52 | 4.02 52.65 | 38.84 | 46.91 | 8.23 | 12.17 | 49,.57) 5.82 |41.02] 10.46 0.74 3 |M2000/24-60F| 3 | 44 | 53.42 139.09 |47.17 | 848 |12.93| 11.07) 6.05 |41.5a| 10.97 1.25 68.94 | 55.30 | 63.37 10.57 57.45 1.27 0.74 4 |maoo04-70F| 4 | 62 | 6979 less lanes 4107 4.78 | 1.25 | 66.55 | 52.65 | 60.99 | 11.07 | 14.99 | 10.57 56.07| 13.31 0.74 5 |M2oo0/24-71F) | 78 | 67.31 152.93 |61.24 | 11.33 | 15.751 11.07 55.58] 13.82 1.25 For Straight PC Tail Type Connector (Receptacle) 7.56+0.20 (15 TO 62 PIN) {78 PIN) SR.| CONNECTOR NO! PaRT No. | 1 |m2000/23-67F| 1 2 |m2000/23-68F| 2 alelelolele lela] es lel ev 30.43 | 16.21 | 24.87 0.51 15 | 31.19 | 16.46 | 25.12 4.02 2g | 38.76 | 24.54 | 33.20 051 39.52 | 24.79 | 33.45 4,02 52.65 | 38.25 | 46.91 | 7.77 | 12.17] 10.46 | 8.05 10.46 |0.89 | 0.74 3 |M2oa0/2a-60F| 3 | 44 | 53.42 | 38.51 |47.17 | 8.03 | 12.93] 11.15] 6.30 10.97 }1.52 | 4.25 68.94 | 34.71 | 63.37 0.74 4 |mzooores-7oF| 4 | 62 | 575 lever |eacs te 66.55 | 52.30 |60.99 | 10.62 | 14.99 13.31 0.74 5 [M2ooo2s-71F] 5 | 78 | 67.31 |52.55|61.24 | 10.87 115.75] of 13.82 1.25 x CLINCHNUT = 4 s (4-400UNC) INTERFACIAL Bb a f + SEAL 3 a > ! = 3 7=">1_BRASS BUSH 4 Po | = gil ili] 2Nos, Lo 320 i PL NNECTOR CONNECTOR WITH BRASS BUSH WITH INTERFAGIAL SEAL 3.75+0.02 WITH CLINCH NUT (4 - 490UNC THREAD) >rdering information For Standard D-Sub Connector Right Angle PC Tail Contact (Plug) M2000, XX XxX X L Series: M2000 Connector Type: 24 - Right angle Plug Connector with | PC Tail Contact Special Option 23 - Right angle Receptacle Connector (Nil for standard with PC Tail Contact version) Shell Size: 31 - 9 Pin with right angle PC Tail contact with 3.96 mm PC Tail length Finish from Mounting Bracket 32 - 15 Pin with right angle PC Tail contact with 3.96 mm PC Tail length Shell Size from Mounting Bracket 33 - 25 Pin with right angle PC Tail contact with 3.96 mm PC Tail length Connector Type from Mounting Bracket 34 - 37 Pin with right angle PC Tail contact with 3.96 mm PC Tail length Series from Mounting Bracket 35 - 50 Pin with right angle PC Tail contact with 3.96 mm PC Tail length Manufacturers __ from Mounting Bracket _ Logo Finish: F - Cadmium plate with yellow passivation Z - Zinc Plated, N - Nickel Plated, T - Tin Plated Special Option: |= L- Launch vehicle application Plug Connector With Pin Contact, Right Angle PC Tail Contact H G S 10.03 M : 4 TE 1.78 MAX. al al 9 3.0540.13 | | STD-THROUGH HOLE. | | * 1.24 MAX, N 6 0.7640.02 e {09 TO 37 PIN) {60 PIN) DIMENSIONS Sr. CONNECTOR |SHELL]| A B c D E G| oH J K M N P s x NO. NO. SIZE | +0.38 | 0.13 | +0.13| +0.38 | 0.38 | 20.25 /40.25 |+0.25 40.25 | 0.25 |+0.10] 40.25 | +0.20 1 @M2000/24-31F | 9 | 30.81 | 16.92 | 24.99 19.28 6.04/5.82] 0.76 | 10.72 2 @M2000/24-32F | 15 | 39.14 | 25.25 | 33.33 27.51 8.36 | 12.55] 10.03] 12.29 3 @M2000/24-33F | 25 | 53.04 | 38.96 | 47.04 7.19 2.84 | 29.59 | 3.96 4 @M2000/24-34F | 37 | 69.32 | 55.42 | 63.50 5,99/5.68] 0.99 | 10.82 57.71 5 @M2000/24-35F | 50 | 66.93 | 52.81 | 61.11 | 11.20 | 15.37] 12.88] 15.09 55.32 M J 1.78 MAX. @ 3.0540.13 bo dn STD-THROUGH HOLE. K | | 1.24 MAX, @ 0.76+0.02 N Pp (09 TO 37 PIN) OPIN) | DIMENSIONS Sr. CONNECTOR | SHELL] A B c D E G H J K M N P $s x NO. NO. SIZE | 20.38 | +0.13 | +0.13 | +0.38] 40.38 | 40.25 | 40.25 | +0.25 #0.25] 40.25] +0.10| 40.25 | +0.20 1 @Mz2000/23-31F} 9 | 30.81 | 16.33 | 24.99 19.28 0.76 2 | @m2000/23-32F | 15 | 39.14 | 24.66 | 33.33 27.51 7.90 | 12.55 | 10.03 | 12.29 L 3 | @Mz000/23-33F | 25 | 53.04 | 38.38 | 47.04 7.19 |6.30\6.04| 10.90] 2.84 | 2959 | 3.96 4 | @M2000/23-34F | 37 | 69.32 | 54.84 | 63.50 0.99 57.71 5 | @M2000/23-35F} 50 | 66.93 | 52.43 | 61.11 | 10.74] 15.37 | 12.88 | 15.09 55.32rdering Information For Standard D-Sub Connector (Right Angle PC Tail Contact With Extra PC Tail Length) Series: M2000 Connector Type 24- Right angle type Plug Connectors with PC Tail length 23- Right angle Receptacle Connector with Special option PC Tail Contact (Nil for Shell Size : 49 - 9PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket (A) M2000 XX XX X X standard version) Plating Finish 50 - 15PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket Shell Size 51 - 25PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket Connector Type 52 - 37PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket Series 53 - 50PinRight angle PC Tail contact with 4.78mm PC Tail length from Mounting Bracket Manufacturers Finish: F - Cadmium plate with yellow passivation Logo Z - Zinc Plated, N - Nickel Plated, T - Tin Plated Special Option: | L- Launch vehicle application Plug Connector With Pin Contact, Right Angle PC Tail contact H G G 10.03 J J 1.78 MAX. 8 3.0520.13 | STD-THROUGH HOLE. x 1.24 MAX. 2 0.7640.02 Pp (09 TO 37 PIN, (50 PIN) DIMENSIONS Sr. CONNECTOR |SHELL| A] B c Dp] ec 6] Hu J K M| ON P s | xi NO. NO. SIZE | 20.38} 40.13 | 0.13 | +0.38 | 0.38 | +0.25 | 0.25 | 20.25 20.25 | 20.25 | 20.10 | 20.25 | #0.20 1 | @M2000/24-49F 9 | 30.81] 16.92 | 24.99 19.28 8.04\5.82| 0.76 | 10.72 2 | @Mz00/24-50F 15 | 39.14|25.25 | 33.33 27.51 8.38 | 12.55 | 10.03 | 12.29 3 | @m200024-51F | 25 | 53.04}38.96 | 47.04 7.49 2.84 | 29.59 | 4.78 4 | @mM20002452F | 37 | 69.32/55.42 | 63.50 5,99\5.68| 0.99 | 10.82 o7.71 5 | @m2000245aF | 50 | 66.93/52.81 | 61.11 | 11.20 | 15.37 | 12.88 | 15.09 55.32 H G J M 1.78 MAX. . @ 3.0540.13 5 AA Ww a r Hy & 7 4 STD-THROUGH HOLE Lk | x 1.24 MAX. @ 0.7640.02 N . Pp (09 TO 37 PIN) (50 PIN) DIMENSIONS Sr. CONNECTOR |SHELL] A B c D E G H J K M N P s x1 NO. NO. SIZE | 20.38 | 20.13 | +0.13 | 20.38 | +0.38 | 20.25] 20.25 | 40.25 40.25 | 20.25 |20.10 | 20.25 |20.20 1 | @m20002340F| 9 | 30.81 | 16.33 | 24.90 19.28 0.76 2 | @macoo2ss0F| 15 | 39.14 | 24.68 | 33.23 2751 7.90 | 12.55 | 10.03] 12.29 |_ 3 | @m20002251F| 25 | 53.04 | 38.38 | 47.04 7.19 | 6.016.04 10.90 | 2.84 | 29.59 | 478 4 | @m200023-52F| 37 | 69.32 | 54.84 | 63.50 0.99 57.71 5 | @m200073-53F| 50 | 66.93 | 52.43 | 61.11 | 10.74 | 15.37 | 12.88] 15.09 55.32rdering Information Right Angle PC Tail Type Connector (Plug) ORDERING INFORMATION R/A PC TAIL CONNECTORS CONNECTOR TYPE: 2000 / 24 XK F OK 23 - RECEPTACLE CONNECTOR (PC TAIL TYPE) 24 -PLUG CONNECTOR (PC TAIL TYPE) CN - WITH CLINCH NUT (4-40UNC) FINISH FS - FEMALE SCREWLOCK (JACKPOST) F- CADMIUM YELLOW PASSIVATED L - LAUNCH VEHICLE OPTION Z - ZING YELLOW PASSIVATED K - ZINC NICKEL FINISH FINISH T-NICKEL PTFE FINISH TI - TIN PLATED SHELL SIZE (73, 74, 75, 76) CONNECTOR TYPE NOTE : SERIES 1. BRASS BUSH (SPACER) WILL BE SUPPLIED LOOSE WITH THIS CONNECTOR MANUFACTURER LOGO (NOT APPLICABLE FOR CONNECTOR WITH CLINCH NUT) (2 PL'S) DIMENSION TABLE (PLUG CONNECTOR) SHELLINO/OF]| A | B c DIE H J K s K CONN.NO. | ae | ping | 40.38 | 20.13 | 90.13 | 40.38 | 0.38 | 0.25 | 0.25 40.25 | 0.20 M2000/24-73F | 1 | 15 |30.81 | 16.92 |24.99 19.28 10.72 | 0.76 | 6.0415.82 m2000/24-74F | 2 | 26 |30.14|25.25 |33.33 27st 8.36 | 12.55 3.96 M2000/24-75F 3 44 | 53.04 | 38.96 | 47.04 A130 M2000/24-76F 4 62 69.32 | 55.42 163.50 10.82 | 0.99 | 5.99\5.68 vied For Straight PC Tail Type Connector (Receptacle) MARKED ON FRONT SHELL B PIN14 DIMENSION TABLE (RECEPTACLE CONNECTOR) co 0, |SHELLINO/OF] A | B c DIE H J K s x NN.NO. | size | ping | 40.38 | +0-13 | 90.13 | +0.38 | 40.38 [0.25 | 20.25 40.25 | 40.20 M2000/23-73F | 1 | 15 | 30.81 | 16.33 |24.99 19.28 0.76 m2000/23-74F | 2 | 26 | 39.14 | 24.66 |33.33 o75t 7.90 | 12.55 | 10.90 6.04\6.30 =} 3.96 M2000/23-75F 3 44 53.04 | 38.38 | 47.04 41,30 M2000/23-76F 4 62 69.32 | 54.84 [63.50 10.82 | 0.99 OFTT >rdering Information Right Angle PC Tail Type Connector ORDERING INFORMATION R/A PC TAIL CONNECTORS CONNECTOR TYPE: M2000 / 24 XX F XKXK 23 - RECEPTACLE CONNECTOR (PC TAIL TYPE) 24 - PLUG CONNECTOR (PC TAIL TYPE) L CN - WITH CLINCH NUT (4-40UNC) FINISH FS - FEMALE SCREWLOCK (JACKPOST) F- CADMIUM YELLOW PASSIVATED L - LAUNCH VEHICLE OPTION Z - ZINC YELLOW PASSIVATED K - ZINC NICKEL FINISH FINISH T - NICKEL PTFE FINISH TI- TIN PLATED SHELL SIZE (77) CONNECTOR TYPE SERIES MANUFACTURER LOGO For Straight PC Tail Type Connector (Plug) SOO Ht t+t+t+tttt+t+oo9 gree tttttt ett ett tooo, O@+++++++++4++4++ BO++++++4+4+4+4+4+4+08 DIMENSION TABLE (PLUG CONNECTOR) SR] parTNo. __|NO. OF SHEL A,B ]Cc |. EYyF |e )4 2 yk Lx | NO, PINS | SIZE . M2000/24-77F Max167.31 | 52.55 |61.24 | 40.87 | 15.75 | 11.15 | 6.30 | 55.58 | 13.82 | 1.24 | 4 96 1 78 | 5 |minles.ss [52.30 [60.90 | 10.62 | 14.99 [10.64 | 6.05 [55.07 | 13.31 | 0.74 For Straight PC Tail Type Connector (Receptacle) MARKING ON THIS SIDE DIMENSION TABLE (RECEPTACLE CONNECTOR) SR] PART NO. INO. OF SHELL A B |c |D E F G ]A J L X |NO. pins.| size +0.20 M2000/23-77F MAX 67,31 | 52.55 161.24 |10.87 | 15,75 112.15 | 6.30 | 55.58 | 13.82 | 1.24 | 4 96 1 7] 5 [MN 66.55 | 52.30 [60.99 | 10.62 | 14.99 | 10.64 | 6.05 | 55.07 | 13.31 | 0.74 <i>rdering Information For Saver Type Connector ORDERING INFORMATION FOR SAVER CONNECTORS @ m2000 / CS HD XX- X PS L. PLUG TO SOCKET NONE- CADMIUM YELLOW PASSIVATED Z - ZINC YELLOW PASSIVATED NO. OF PINS STD. 9, 15, 25, 37, 50 HD - 15, 26, 44, 62, 78 NONE - STANDARD DENSITY HD - HIGH DENSITY SAVER CONNECTOR SERIES MANUFACTURER LOGO ~ PLUG FRONT FACE RECEPTACLE FRONT FACE PING ala 4-400UNC-28 A 22.0 MAX. os THREAD 5) t ay yF | SGRe: Ee} i r - 6.17+40.13 5.9740.15 BILL OF MATERIAL 50 PIN (3 ROWS) DIMENSION TABLE (STANDARD DENSITY) SR. CONNECTOR | SHELUNO. OF | A B AT Br | C D FP NO PART NO. SIZE] PINS [0.13 |#0.13 [40.13 |#0.13 | 0.13 [40.38 | 40.38 1 | M2000/CS-9PS 1 16 |16.92 16.33 24.99 | 30.81 2 | M2000/CS-15PS 2 26 = |25.25 24.66 33.32 | 39.14 19.55 3 | M2000/CS-25PS 3 44 |38.96 | 8.36 |38.38 47.04 | 53.04 4 | M2000/CS-37PS 4 62 155.42 54.84 63.50 | 69.32 5 | M2000/CS-37PS 5 78 |52.81 | 11,20 | 52.43 61.11 | 66.93 HD Saver Connector PLUG FRONT FACE RECEPTACLE FRONT FACE 4-400UNC-28 THREAD \ MARK A CONN. P/NO. AS PER. BILL OF MATERIAL PIN 4 N THREAD 6.1740.13 5.9740.15 HEXSCREW 2NOS. | 78 PIN (4 ROWS) A |G | Il T DIMENSION TABLE (HIGH DENSITY) D SR. CONNECTOR | SHELUNO. OF | A B Al | BI| C D F " NO PART NO. SIZE| PINS |+#0.13 |#0.13 |#0.13 |+#0.13 | 0.13 |40.38 | +0.38 1 M2000/CSHD-15PS 1 15 16.92 16.33 24.99 | 30.81 2 | M2000/CSHD-26PS | 2 26 = |25.25 24.66 | 7.90 | 33.32 | 39.14 49.55 3 | M2000/CSHD-44PS | 3 44 |38.96 | 8.36 | 38.38 47.04 | 53.04 4 | M2000/CSHD-62PS | 4 62 (55.42 54.84 63.50 | 69.32 5 | M2000/CSHD-78PS| 5 78 |52.81 | 11,20 | 52.43 | 10.74 | 61.11 | 66.93 | 15.37 >ust Cover MATERIAL: PVC per UL 94V-0 R._0.50 R. 2.60 10 _ = x iu 4 4 SE F im cC _| LG ip THICK D A eu sn sec pI eI Sr. Number Part No. +00 400 D E F Gi NO. of Position -0.20 -0.20 *0.20 *0.20 *0.20 *0.20 1 Male-09 M2000-109118 17.70 9.10 8.1 8.2 3.0 1.60 2 Male-15 M2000-109119 26.0 9.10 77 10.1 3.4 1.60 3 Male-25 M2000-109120 39.70 9.10 76 12.0 3.1 1.60 4 Male-37 M2000-109121 56.20 9.10 76 14.00 3.2 1.60 5 Male-50 M2000-109122 53.60 11.90 8.1 12.00 29 1.60 7 Male-78 M2000-109123 53.60 11.90 8.1 12.00 29 1.60 8 Male-104 M2000-109124 56.70 13.50 8.1 12.00 29 1.60 Ordering information: Order on part numbers PLASTIC DUST CAP RECEPTACLE MATERIAL: PVC per UL 94V-0 10 R. 0.50 R. 2.60 iu Kt Y F Q c _,| G Dy THICK Sr. Number Part No A C D Ee - G as . +0.0 +0.0 + + + + NO. of Position -0.2 -0.2 *0.20 *0.20 70.20 70.20 1 Female-09 M2000-109125 16.10 7.60 8.1 8.0 3.4 1.60 2 Female-15 M2000-109126 24.50 7.60 8.1 12.6 2.5 1.60 3 Female-25 M2000-109127 38.10 7.60 76 12.1 3.1 1.60 4 Female-37 M2000-109128 54.50 7.60 7.8 12.6 2.5 1.60 5 Female-50 M2000-109129 52.10 10.50 8.10 12.0 3.0 1.60 7 Female-78 M2000-109130 52.10 10.50 8.10 12.0 3.0 1.60 8 Female-104 M2000-109131 55.20 12.00 8.10 12.0 3.0 1.60 Ordering information: Order on part numbers Notice : All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances, Amphenol reserves the right to change specifications without notice. This publication D-Sub Series Connectors 02/17 supercedes all <>Amphenol A Global Company on ?Sales & Product Support Amphenol PCD 72 Cherry Hill Drive Beverly, MA 01915 USA Tel: +1-978-624-3400 Fax: +1-978-927-1513 info@amphenolpcd.com www.amphenolpcd.com www.backshellworld.com France Amphenol Socapex S.A.S. 948,Promenade de I'Arve Bp29, Thyez Cedex 74311, France Tel: +33-4-5089-2800 Fax: +33-4-5096-1941 Amphenol Air-LB Immeuble Le Doublon 11, Avenue Dobonnet Courbevoice-Cedex 92407, France Ph: +33-1-4905-3000 Fax: +33-1-4905-3043 India Amphenol Interconnect India Pvt. Ltd. 105 Bhosari Industrial Area Pune-411026, India Tel: +9120-3068-8305 Fax:+9120-27 12-9158 NORTH AMERICA Amphenol Aerospace Operations 40-60, Delaware Avenue Sidney, NY 13838-1395 Tel: +1-607-563-5011 Fax: +1-607-563-5357 Amphenol Canada Meford Drive Scarborough, ON MIB 2X6 Tel: +416-291-4401 Fax: +416-292-0647 Amphenol Fiber Systems International 1300 Central Expressway North Suite 100 Allen, Texas 75013, USA Tel: +1-214-547-2400 Fax: +1-214-547-9344 EUROPE United Kingdom Germany Italy Center & East Europe Amphenol Limited Amphenol-AirLB GmbH Via Barbaiana 5 Amphenol Austria Thanet Way, Whitstable Kent CT5 3JF, England Tel: +44-1227-773-200 Fax: 44-1227-276-571 Am Kleinbahnhof 4 Saarlouis D-66740, Germany Tel: 49-6831-9810-00 Fax: 49-6831-9810-30 20020 Lainate (Milano) Wiener Gasse 68 Italy 2380 Perchtoldsdorf Tel :+39-02-93254.209 Tel: +43-699-10396071 +39-02-93254.214 Fax: +43 699 40396071 Fax:+39-02-93254-444 Spain Holland Sweden Amphenol Iberica Amphenol Benelux Amphenol Edificio Burgosol Oficina Zadelmaker 121 (Nordic & Baltic) N 55 C/Comunidad de NL-2401 PD Alphen Angsullsvagen 7 Madrid 35 bis - aan den Rijn Holland S-187 51 Taby Las Rozas (Madrid) Tel:+31-172-444903 Sweden Tel: +34-91-6407302 +34-91-6407306 Fax:+34-91-6407307 ASIA Japan Amphenol Japan 471-1, Deba, Ritto City Shiga 520-3041, Japan Tel: +81-77-553-8501 Fax: +81-77-551-2200 Korea Fax:+31-172 240254 Tel: +46-85-1051816 +46-76-8418600 Fax: +46-70- 2634677 +46-70-2203197 China Amphenol PCD Shenzhen 3/F Building, A4 Songbai Industrial Park East Road of Minghuan Gongming Town, Baon District Shenchen, China Tel: +86-755-8173-8000 Singapore Amphenol East Asia Ltd. 72 Bendemeer Road # 03-33 Luzerne Singapore 339 941 Tel: 65-6294-2128 Fax: 65-6294-3522 Amphenol Interconnect India Pvt. Ltd. 61 Electronics City Bangalore-560 100, India Ph: +9180-2852-3838 Fax: +9180-2852-0418 Australia Amphenol Australia Pty Ltd 2 Fiveways Boulevard Keysborough VIC 3173 Ph: +61-3-8796-8888 Fax: +61-3-8796-8801 Israel Bar-Tec Lid. P.O. Box 279 Kfar Sava, 44102 Israel Tel: +972-9-7644100 Fax: +972-9-7674324 Amphenol Daeshin Electronics 558 SoSa, SongNae, Bucheon-City Fax: +86-755-8173-8180 Kyunggi-Do, Korea 420-130 Tel: +82-32-610-3800 Fax: +92-32-673-2507 ROW Africa Amphenol South Africa 30 Impala Road 2196 Sandton-Chistlehurston South Africa Tel: +27-11-783-9517 Fax: +27-11-783-9519 Turkey Amphenol International Ltd. Sun Plaza Ka:15 Maslak Mah. Bilim Sok. No:5 34398 Sisli Istanbul Tel: +90 212 367 92 19 Fax: +90 212 367 92 21 Russia Amphenol Russia 8-2 Yaroslavskaja Str 129164 Moscow, Russia Tel: +7-495-937-6341 Fax: +7-495-937-6319 Brazil Amphenol do Brasil Ltda Rua Diogo Moreira 132 CEP 05423-010 Sao Paulo-SP, Brazil Tel: +55-11-3815-1003 Fax: +55-11-3815-1629 Argentina Amphenol Argentina Avenida Callao 930 2nd Floor, Office B Plaza C1023AAP Buenos Aires Argentina Tel: 54-11-4815-6886 Fax: 54-11-4814-5779