DATA SH EET
Product specification
File under Integrated Circuits, IC06 December 1990
INTEGRATED CIRCUITS
74HC/HCT160
Presettable synchronous BCD
decade counter; asynchronous
reset
For a complete data sheet, please also download:
•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
•The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
•The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
December 1990 2
Philips Semiconductors Product specification
Presettable synchronous BCD decade
counter; asynchronous reset 74HC/HCT160
FEATURES
•Synchronous counting and loading
•Two count enable inputs for n-bit cascading
•Positive-edge triggered clock
•Asynchronous reset
•Output capability: standard
•ICC category: MSI
GENERAL DESCRIPTION
The 74HC/HCT160 are high-speed Si-gate CMOS devices
and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC
standard no. 7A.
The 74HC/HCT160 are synchronous presettable decade
counters which feature an internal look-ahead carry and
can be used for high-speed counting.
Synchronous operation is provided by having all flip-flops
clocked simultaneously on the positive-going edge of the
clock (CP).
The outputs (Q0 to Q3) of the counters may be preset to a
HIGH or LOW level. A LOW level at the parallel enable
input (PE) disables the counting action and causes the
data at the data inputs (D0 to D3) to be loaded into the
counter on the positive-going edge of the clock (providing
that the set-up and hold time requirements forPE are met).
Preset takes place regardless of the levels at count enable
inputs (CEP and CET).
A LOW level at the master reset input (MR) sets all four
outputs of the flip-flops (Q0 to Q3) to LOW level regardless
of the levels at CP, PE, CET and CEP inputs (thus
providing an asynchronous clear function).
The look-ahead carry simplifies serial cascading of the
counters. Both count enable inputs (CEP and CET) must
be HIGH to count. The CET input is fed forward to enable
the terminal count output (TC). The TC output thus
enabled will produce a HIGH output pulse of a duration
approximately equal to a HIGH level output of Q0. This
pulse can be used to enable the next cascaded stage.
The maximum clock frequency for the cascaded counters
is determined by the CP to TC propagation delay and CEP
to CP set-up time, according to the following formula:
fmax =1
tP max()
CP toTC()+t
SU (CEP to CP)
---------------------------------------------------------------------------------------------------------
QUICK REFERENCE DATA
GND = 0 V; Tamb=25°C; tr=t
f= 6 ns
SYMBOL PARAMETER CONDITIONS TYPICAL UNIT
HC HCT
tPHL propagation delay
CP to Qn
CP to TC
MR to Qn
MR to TC
CET to TC
CL=15pF;
V
CC =5V 19
21
21
21
14
21
24
23
26
14
ns
ns
ns
ns
ns
tPLH propagation delay
CP to Qn
CP to TC
CET to TC
19
21
14
21
20
7
ns
ns
ns
fmax maximum clock
frequency 61 31 MHz
CIinput capacitance 3.5 3.5 pF
CPD power dissipation
capacitance per
package
notes 1 and 2 39 34 pF
Notes
1. CPD is used to determine the
dynamic power dissipation
(PD in µW):
PD=C
PD × VCC2× fi+
∑ (CL× VCC2 × fo)
where:
fi= input frequency in MHz
fo= output frequency in MHz
∑ (CL× VCC2× fo) = sum of
outputs
CL= output load capacitance in
pF
VCC = supply voltage in V
2. For HC the condition is
VI= GND to VCC
For HCT the condition is
VI= GND to VCC − 1.5 V
December 1990 3
Philips Semiconductors Product specification
Presettable synchronous BCD decade
counter; asynchronous reset 74HC/HCT160
ORDERING INFORMATION
See
“74HC/HCT/HCU/HCMOS Logic Package Information”
.
PIN DESCRIPTION
PIN NO. SYMBOL NAME AND FUNCTION
1MR asynchronous master reset (active LOW)
2 CP clock input (LOW-to-HIGH, edge-triggered)
3, 4, 5, 6 D0 to D3data inputs
7 CEP count enable input
8 GND ground (0 V)
9PE parallel enable input (active LOW)
10 CET count enable carry input
14, 13, 12, 11 Q0 to Q3flip-flop outputs
15 TC terminal count output
16 VCC positive supply voltage
Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.
December 1990 4
Philips Semiconductors Product specification
Presettable synchronous BCD decade
counter; asynchronous reset 74HC/HCT160
FUNCTION TABLE
Notes
1. The TC output is HIGH when CET is HIGH and the counter is at terminal count (HLLH).
H = HIGH voltage level
h = HIGH voltage level one set-up time prior to the LOW-to-HIGH CP transition
L = LOW voltage level
I = LOW voltage level one set-up time prior to the LOW-to-HIGH CP transition
q = lower case letters indicate the state of the referenced output one set-up time prior to the LOW-to-HIGH CP
transition
X = don’t care
↑= LOW-to-HIGH CP transition
OPERATING MODE INPUTS OUTPUTS
MR CP CEP CET PE DnQnTC
reset (clear) L XXXXXL L
parallel load H
H↑
↑X
XX
XI
II
hL
HL
(1)
count H ↑hhhXcount (1)
hold H X I X h X qn(1)
(do nothing) H X X I h X qnL
Fig.4 Functional diagram.
December 1990 5
Philips Semiconductors Product specification
Presettable synchronous BCD decade
counter; asynchronous reset 74HC/HCT160
Fig.5 State diagram.
Fig.6 Typical timing sequence: reset outputs to zero;
preset to BCD seven; count to eight, nine, zero,
one, two and three; inhibit.
Fig.7 Logic diagram.
December 1990 6
Philips Semiconductors Product specification
Presettable synchronous BCD decade
counter; asynchronous reset 74HC/HCT160
DC CHARACTERISTICS FOR 74HC
For the DC characteristics see
“74HC/HCT/HCU/HCMOS Logic Family Specifications”
.
Output capability: standard
ICC category: MSI
AC CHARACTERISTICS FOR 74HC
GND = 0 V; tr=t
f= 6 ns; CL= 50 pF
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HC VCC
(V) WAVEFORMS
+25 −40 to +85 −40 to +125
min. typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
CP to Qn
61
22
18
185
37
31
230
46
39
280
56
48
ns 2.0
4.5
6.0
Fig. 8
tPHL/ tPLH propagation delay
CP to TC 69
25
20
215
43
31
270
54
46
325
65
55
ns 2.0
4.5
6.0
Fig. 8
tPHL propagation delay
MR to Qn
69
25
20
210
42
36
265
53
45
315
63
54
ns 2.0
4.5
6.0
Fig. 9
tPHL propagation delay
MR to TC 69
25
20
220
44
37
275
55
47
330
66
56
ns 2.0
4.5
6.0
Fig. 9
tPHL/ tPLH propagation delay
CET to TC 47
17
14
150
30
26
190
38
33
225
45
38
ns 2.0
4.5
6.0
Fig. 10
tTHL/ tTLH output transition time 19
7
6
75
15
13
95
19
16
110
22
19
ns 2.0
4.5
6.0
Figs 8 and 10
tWclock pulse width
HIGH or LOW 80
16
14
22
8
6
100
20
17
120
24
20
ns 2.0
4.5
6.0
Fig. 8
tWmaster reset pulse width
LOW 80
16
14
28
10
8
100
20
17
120
24
20
ns 2.0
4.5
6.0
Fig. 9
trem removal time
MR to CP 100
20
17
30
11
9
125
25
21
150
30
26
ns 2.0
4.5
6.0
Fig. 9
tsu set-up time
Dn to CP 80
16
14
22
8
6
100
20
17
120
24
20
ns 2.0
4.5
6.0
Fig. 11
tsu set-up time
PE to CP 135
27
23
41
15
12
170
34
29
205
41
35
ns 2.0
4.5
6.0
Fig. 11
December 1990 7
Philips Semiconductors Product specification
Presettable synchronous BCD decade
counter; asynchronous reset 74HC/HCT160
tsu set-up time
CEP, CET to CP 200
40
34
63
23
18
250
50
43
300
60
51
ns 2.0
4.5
6.0
Fig. 12
thhold time
Dn to CP 0
0
0
−17
−6
−5
0
0
0
0
0
0
ns 2.0
4.5
6.0
Figs 11 and 12
thhold time
PE to CP 0
0
0
−41
−15
−12
0
0
0
0
0
0
ns 2.0
4.5
6.0
Figs 11 and 12
thhold time
CEP, CET to CP 0
0
0
−58
−21
−17
0
0
0
0
0
0
ns 2.0
4.5
6.0
Figs 11 and 12
fmax maximum clock pulse
frequency 6.0
30
35
18
55
66
4.8
24
28
4.0
20
24
MHz 2.0
4.5
6.0
Fig. 8
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HC VCC
(V) WAVEFORMS
+25 −40 to +85 −40 to +125
min. typ. max. min. max. min. max.
December 1990 8
Philips Semiconductors Product specification
Presettable synchronous BCD decade
counter; asynchronous reset 74HC/HCT160
DC CHARACTERISTICS FOR 74HCT
For the DC characteristics see
“74HC/HCT/HCU/HCMOS Logic Family Specifications”
.
Output capability: standard
ICC category: MSI
Note to HCT types
The value of additional quiescent supply current (∆ICC) for unit load of 1 is given in the family specifications.
To determine ∆ICC per input, multiply this value by the unit load coefficient shown in the table below.
INPUT UNIT LOAD COEFFICIENT
MR 0.95
CP 0.80
CEP 0.25
Dn0.25
CET 1.05
PT 0.30
December 1990 9
Philips Semiconductors Product specification
Presettable synchronous BCD decade
counter; asynchronous reset 74HC/HCT160
AC CHARACTERISTICS FOR 74HCT
GND = 0 V; tr=t
f= 6 ns; CL= 50 pF
PACKAGE OUTLINES
See
“74HC/HCT/HCU/HCMOS Logic Package Outlines”
.
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HCT VCC
(V) WAVEFORMS
+25 −40 to +85 −40 to +125
min. typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
CP to Qn
25 43 54 65 ns 4.5 Fig. 8
tPHL propagation delay
CP to TC 28 48 60 72 ns 4.5 Fig. 8
tPLH propagation delay
CP to TC 23 39 49 59 ns 4.5 Fig. 8
tPHL propagation delay
MR to Qn
27 50 63 75 ns 4.5 Fig. 9
tPHL propagation delay
MR to TC 30 50 63 75 ns 4.5 Fig. 9
tPHL propagation delay
CET to TC 17 35 44 53 ns 4.5 Fig. 10
tPLH propagation delay
CET to TC 9 17 21 26 ns 4.5 Fig. 10
tTHL/ tTLH output transition time 7 15 19 22 ns 4.5 Figs 8 and 10
tWclock pulse width
HIGH or LOW 16 8 20 24 ns 4.5 Fig. 8
tWmaster reset pulse width
LOW 20 11 25 30 ns 4.5 Fig. 9
trem removal time
MR to CP 20 9 25 30 ns 4.5 Fig. 9
tsu set-up time
Dn to CP 18 10 25 30 ns 4.5 Fig. 11
tsu set-up time
PE to CP 30 18 44 53 ns 4.5 Fig. 11
tsu set-up time
CEP, CET to CP 50 30 63 75 ns 4.5 Fig. 12
thhold time
Dn to CP 0−8 0 0 ns 4.5 Figs 11 and 12
thhold time
PE to CP 0−13 0 0 ns 4.5 Figs 11 and 12
thhold time
CEP, CET to CP 0−21 0 0 ns 4.5 Figs 11 and 12
fmax maximum clock pulse
frequency 16 28 13 11 MHz 4.5 Fig. 8
Philips Semiconductors - PIP - 74HC/HCT160; Presettable synchronous BCD decade counter; asynchronous reset
Philips Semiconductors Home
Product
catalog
Buy
online
MySemiconductors
Contact
Products
•MultiMarket
Semiconductors
•Product Selector
•Catalog by
Function
•Catalog by
System
•Cross-reference
•Packages
•End of Life
information
•Distributors Go
Here!
•Models
•SoC solutions
Product Information
74HC/HCT160;
Presettable
synchronous BCD
decade counter;
asynchronous reset
Information as of 2003-04-22
My.Semiconductors.COM.
Your personal service from
Philips Semiconductors.
Please register now !
Stay informed
Use right mouse button to
download datasheet
Download datasheet
General description Features Applications Datasheet
Block diagram Buy online Support & tools Email/translate
Products & packages Parametrics Similar products
top
General description
The 74HC/HCT160 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC standard no. 7A.
The 74HC/HCT160 are synchronous presettable decade counters which feature an internal look-ahead carry and can
be used for high-speed counting.
Synchronous operation is provided by having all flip-flops clocked simultaneously on the positive-going edge of the
clock (CP).
The outputs (Q0 to Q3) of the counters may be preset to a HIGH or LOW level. A LOW level at the parallel enable
input (PE) disables the counting action and causes the data at the data inputs (D0 to D3) to be loaded into the counter
on the positive-going edge of the clock (providing that the set-up and hold time requirements for PE are met). Preset
takes place regardless of the levels at count enable inputs (CEP and CET).
A LOW level at the master reset input (MR) sets all four outputs of the flip-flops (Q0 to Q3) to LOW level regardless
of the levels at CP, PE, CET and CEP inputs (thus providing an asynchronous clear function).
The look-ahead carry simplifies serial cascading of the counters. Both count enable inputs (CEP and CET) must be
HIGH to count. The CET input is fed forward to enable the terminal count output (TC). The TC output thus enabled
will produce a HIGH output pulse of a duration approximately equal to a HIGH level output of Q0. This pulse can be
used to enable the next cascaded stage.
The maximum clock frequency for the cascaded counters is determined by the CP to TC propagation delay and CEP
to CP set-up time, according to the following formula:
fmax = (1) / (tP (max) ( CP to TC) + tSU (CEP to CP) )
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74HC160N.html (1 of 4) [Apr-29-2003 12:09:52 PM]
Submit Query
Philips Semiconductors - PIP - 74HC/HCT160; Presettable synchronous BCD decade counter; asynchronous reset
top
Features
● Synchronous counting and loading
● Two count enable inputs for n-bit cascading
● Positive-edge triggered clock
● Asynchronous reset
● Output capability: standard
● ICC category: MSI
top
Datasheet
Type number Title Publication
release date Datasheet status Page
count File
size
(kB)
Datasheet
74HC/HCT160 Presettable
synchronous BCD
decade counter;
asynchronous reset
12/1/1990 Product
specification 9 60
Download
PDF
File
Download
Additional datasheet info
To complete the device datasheet with package and family information, also download the following PDF files. The
"Logic Package Information" document is required to determine in which package(s) this device is available.
Document Description
1
Download
PDF
File
HCT_FAMILY_SPECIFICATIONS HC/T Family Specifications, The IC06 74HC/HCT/HCMOS Logic
Family Specifications
2
Download
PDF
File
HCT_PACKAGE_INFO HC/T Package Info, The IC06 74HC/HCT/HCMOS Logic Package
Information
3
Download
PDF
File
HCT_PACKAGE_OUTLINES HC/T Package Outlines, The IC06 74HC/HCT/HCMOS Logic
Package Outlines
top
Parametrics
Type number Package Description Propagation
Delay(ns) Voltage No.
of
Pins
Power
Dissipation
Considerations
Logic
Switching
Levels
Output
Drive
Capability
74HC160D SOT109
(SO16)
Presettable
Synchronous
BCD Decade
Counter;
Asynchronous
Reset
15 5 Volts
+16 Low Power or
Battery
Applications CMOS Low
74HC160DB SOT338-1
(SSOP16)
Presettable
Synchronous
BCD Decade
Counter;
Asynchronous
Reset
15 5 Volts
+16 Low Power or
Battery
Applications CMOS Low
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74HC160N.html (2 of 4) [Apr-29-2003 12:09:52 PM]
Philips Semiconductors - PIP - 74HC/HCT160; Presettable synchronous BCD decade counter; asynchronous reset
74HC160N SOT38-1
(DIP16)
Presettable
Synchronous
BCD Decade
Counter;
Asynchronous
Reset
15 5 Volts
+16 Low Power or
Battery
Applications CMOS Low
74HC160PW SOT403-1
(TSSOP16)
Presettable
Synchronous
BCD Decade
Counter;
Asynchronous
Reset
15 5 Volts
+16 Low Power or
Battery
Applications CMOS Low
74HCT160D SOT109
(SO16)
Presettable
Synchronous
BCD Decade
Counter;
Asynchronous
Reset; TTL
Enabled
15 5 Volts
+16 Low Power or
Battery
Applications TTL Low
74HCT160N SOT38-1
(DIP16)
Presettable
Synchronous
BCD Decade
Counter;
Asynchronous
Reset; TTL
Enabled
15 5 Volts
+16 Low Power or
Battery
Applications TTL Low
74HCT160PW SOT403-1
(TSSOP16)
Presettable
Synchronous
BCD Decade
Counter;
Asynchronous
Reset; TTL
Enabled
15 5 Volts
+16 Low Power or
Battery
Applications TTL Low
top
Products, packages, availability and ordering
Type number North
American type
number
Ordering code
(12NC) Marking/Packing
Download
PDF
File
Discretes
packing info
Package Device status Buy online
74HC160D 74HC160D 9337 145 10652 Standard Marking
* Bulk Pack,
CECC
SOT109
(SO16) Full production
-
74HC160D-T 9337 145 10653 Standard Marking
* Reel Pack,
SMD, 13", CECC
SOT109
(SO16) Full production
-
74HC160DB 74HC160DB 9351 896 80112 Standard Marking
* Bulk Pack SOT338-1
(SSOP16) Full production
-
74HC160DB-
T 9351 896 80118 Standard Marking
* Reel Pack,
SMD, 13"
SOT338-1
(SSOP16) Full production
-
74HC160N 74HC160N 9336 693 60652 Standard Marking
* Bulk Pack,
CECC
SOT38-1
(DIP16) Full production
-
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74HC160N.html (3 of 4) [Apr-29-2003 12:09:52 PM]
Philips Semiconductors - PIP - 74HC/HCT160; Presettable synchronous BCD decade counter; asynchronous reset
74HC160PW 74HC160PW 9352 624 37112 Standard Marking
* Bulk Pack
SOT403-1
(TSSOP16)
Full production
-
74HC160PW-
T 9352 624 37118 Standard Marking
* Reel Pack,
SMD, 13"
SOT403-1
(TSSOP16)
Full production
-
74HCT160D 74HCT160D 9337 149 90652 Standard Marking
* Bulk Pack,
CECC
SOT109
(SO16) Full production
-
74HCT160D-
T 9337 149 90653 Standard Marking
* Reel Pack,
SMD, 13", CECC
SOT109
(SO16) Full production
-
74HCT160N 74HCT160N 9336 699 90652 Standard Marking
* Bulk Pack,
CECC
SOT38-1
(DIP16) Full production
-
74HCT160PW 74HCT160PW 9352 624 36112 Standard Marking
* Bulk Pack
SOT403-1
(TSSOP16)
Full production
-
74HCT160PW-
T 9352 624 36118 Standard Marking
* Reel Pack,
SMD, 13"
SOT403-1
(TSSOP16)
Full production
-
top
Similar products
Products
similar
to
74HC/HCT160
74HC/HCT160 links to the similar products page containing an overview of products that are similar in
function or related to the type number(s) as listed on this page. The similar products page includes products from the
same catalog tree(s), relevant selection guides and products from the same functional category.
top
Support & tools
Download
PDF
File
HC/T Family Specifications, The IC06 74HC/HCT/HCMOS Logic Family Specifications(date 01-Mar-98)
Download
PDF
File
HC/T User Guide(date 01-Nov-97)
top
Email/translate this product information
● Email this product information.
● Translate this product information page from English to:
The English language is the official language used at the semiconductors.philips.com website and webpages. All
translations on this website are created through the use of Google Language Tools and are provided for convenience
purposes only. No rights can be derived from any translation on this website.
About this Web Site
| Copyright © 2003 Koninklijke Philips N.V. All rights reserved. | Privacy Policy |
| Koninklijke Philips N.V. | Access to and use of this Web Site is subject to the following Terms of Use. |
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74HC160N.html (4 of 4) [Apr-29-2003 12:09:52 PM]
French
Translate