FUJITSU SEMICONDUCTOR DATA SHEET DS07-10202-1E High-Frequency Resonator Piezoelectric Resonator (24 to 40 MHz) FAR Family (C4 Series L Type) DESCRIPTION The C4 series (L Type) resonators apply to the frequency range 24 to 60 MHz. They are fabricated on a lithium niobate (LiNaO3) substrate, producing resonators with ultra compact and superior stability due to the high electromechanical coupling coefficient of the material. They use the third overtone resonance, so that they can oscilate at high frequency. They include two loading capacitors inside and their package are chip type for surface mount. It contributes saving space and reducing mount cost. FEATURES * * * * * High frequency (24 to 60 MHz) Surface mount package (SMT) Suitable for the source of microcomputer clock Emboss-typed pack for automatic mounting Superior shock and vibration resistance, preventing damage during automatic mounting PACKAGE FAR Family (C4 series L type) STANDARD CHARACTERISTICS Series C4 Series Parameter Material Lithium Niobate (LiNbO3) Frequency Standard frequency Remarks 24 to 40 MHz See " Standard Frequency" Initial frequency deviation Within 0.5% (M) Temperature characteristic (-30C to +85C) Within 0.5% Capacity of built-in capacitor The 0.3% (K) version can also be produced. Reference temperature: +25C 208 pF (standard) 104 pF are also available. Capacity is specified by Fujitsu, considering matching data with applied IC (mainly microcomputer) Within 0.1% Aging stability Operating temperature -30C to +85C Storage temperature -40C to +100C * Resonant frequency 1 M 24 MHz to 40 MHz IC: MC74HCU04N x 2 * V CC = 5 V DC * R: Resonator * C 1, C 2: Loading capacitators (built-in) R C1 C2 Standard measuring circuit * Serial resonant resistance R 75 OSC 2 C1 C2 75 Measuring instrument: Network analyzer LM FAR Family (C4 series L type) STANDARD FREQUENCY Standard frequency (kHz) Package size Resonant resistance 24,000 kHz 33,869 kHz 40,000 kHz L 75 max. (Symbol: 2) Note: Fujitsu can also develop applicable device in addition to standard devices if it's oscillation frequency is from 24 to 60 MHz. NOTES ON USE * Handle carefully * Solder under the following conditions. 5 seconds max. at 230C (PCB) Recommended preheating is 150C for one minute in order not to apply extreme heat to the resonator. * Avoid extreme fluctuations in temperature. * There is no specific direction in resonator mounting. * Oscillation data should be examined when used in oscillation circuit with micon or other ICs. * This is for reflow solder, not for flow solder. 3 FAR Family (C4 series L type) PART NUMBERING SYSTEM FAR -- C 4 C L -- (1) (2) (3) -- (4) -- (5) (6) (7) (8) (9) (1) Series Series Single crystal Capacitator C4 LiNbO3 With built-in capacitator (2) Package Type Specification Type C CHIP (3) Package Type Specification Size L 5.0 x 4.0 x 1.6 (4) Frequency See " Standard Frequency." (Example) Unit: kHz (Specify in five digits.) 24.0 MHz 24000 (5) Initial Frequency Deviation Specification Deviation K 0.3% M 0.5% (6) Built-in Capacitor Specification Capacitance 0 208 pF 1 104 pF (7) Resonant Resistance 4 Specification Resonant resistance 2 75 max. FAR Family (C4 series L type) (8) User-specific Special Symbols Specification Name -- A to Z Description No specifications, no taping specification No specifications, with taping specification Serial number for custom design (9) Resonant Resistance Specification Description R 12 mm wide tape and reel 5 FAR Family (C4 series L type) MARKING Frequency (MHz) Fujitsu logo 24 Ad F Frequency symbol or customer-specific symbol Lot No. (Date of manufacture, conforms to EIAJ) and serial number The marking color varies with the capacitance of the built-in capacitator. Capacitance Making color 10 pF Yellow 20 pF White Data code (EIAJ standard) is specified as follows in four-year cycle. Year Month Symbol Year Month Symbol Year Month Symbol 1997 2001 6 Year Month Symbol 1 A 1 N 1 a 1 2 B 2 P 2 b 2 3 C 3 Q 3 c 3 4 D 4 R 4 d 4 5 E 5 S 5 e 5 6 F 6 T 6 f 7 G 7 U 8 H 8 V 8 9 J 9 W 9 10 K 10 X 10 10 11 L 11 Y 11 11 12 M 12 Z 12 12 1998 2002 1995 1999 2003 7 1996 2000 2004 r 6 t 7 u 8 j n 9 FAR Family (C4 series L type) PIN ASSIGNMENT (1) (3) (2) (1) (3) (2) 7 FAR Family (C4 series L type) DIMENSIONS 3.3 (0.130) 0.5 (0.020) 0.65 (0.026) 1.6 (0.063) 4.3 (0.169) 0.5 (0.020) 8 1.0 (0.039) 0.8 (0.031) 1.4 (0.055) 0.8 (0.031) 1.0 (0.039) 4.0 (0.157) 5.0 (0.197) Unit: mm (in.) FAR Family (C4 series L type) 0.004 ) 0 5.50.1 5.60.1 (0.2200.004) (0.059 0.3 (0.012) 1.0 4.60.1 (0.1810.004) 1.0 0.039 (0.039 ) 0 0 12.00.3 2.00.1 (0.0790.004) 0.1 0 (0.4720.012) 1.5 (0.2170.004) 4.00.1 (0.1570.004) 1.50.1 (0.0590.004) TAPING FORM AND DIMENSIONS 2.5 (0.098) 8.00.15 (0.3150.006) * Reel dimensions 14.01.5 (0.5500.059) 80 (3.150) 13.00.5 (0.5120.020) 21.00.8 (0.8270.031) R1.0 (0.039) 330 (12.992) 20.5 (0.0790.020) 20.4 Max. (0.802) * Pack quantity Specification Quantity R 3,000 Unit: mm (in.) 9 FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-88, Japan Tel: (044) 754-3763 Fax: (044) 754-3329 North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, U.S.A. Tel: (408) 922-9000 Fax: (408) 432-9044/9045 Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LIMITED #05-08, 151 Lorong Chuan New Tech Park Singapore 556741 Tel: (65) 281-0770 Fax: (65) 281-0220 All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F9703 FUJITSU LIMITED Printed in Japan 24