SMT inductors SIMID series, SIMID 2220-A Series/Type: B82442A Date: March 2008 %BUB4IFFU (c) EPCOS AG 2008 . Reproduction, publication and dissemination of this p ublication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. SMT inductors, SIMID series B82442A SIMID 2220-A Size 2220 (EIA) or 5650 (IEC) Rated inductance 1 NH to 10000 NH Rated current 25 mA to 1800 mA Construction Upright ferrite drum core Laser-welded winding Flame-retardant molding Features Temperature range up to 150 C Current handling capability up to 1.8 A High inductance ratings Qualified to AEC-Q200 Suitable for lead-free reflow soldering as referenced in JEDEC J-STD 020C RoHS-compatible Applications Filtering of supply voltages, coupling, decoupling DC/DC converters Automotive electronics Telecommunications (e.g. blocking filter for 12- and 16-kHz counting pulses) Consumer electronics Industrial electronics Terminals Base material CuSn6 Layer composition Cu, Ag, Sn (lead-free)1) Electro-plated Marking Marking on component: Manufacturer, L value (in nH), tolerance of L value (coded), date of manufacture (YWWD) Minimum data on reel: Manufacturer, ordering code, L value, quantity, date of packing Delivery mode and packing unit 12-mm blister tape, wound on 330-mm reel Packing unit: 1500 pcs./reel 1) Ni-barrier-plated terminals on request (B82442A*50). Please read Cautions and warnings and Important notes at the end of this document. 2 03/08 SMT inductors, SIMID series B82442A SIMID 2220-A Dimensional drawing and layout recommendation 3.50.11) A 0.70.2 1) B C D B 0.7 min.1) 5+0.3 0.15 max. IND0053-6 5.6+0.3 A B C D 4.5 2.0 4.0 8.0 5+0.3 Marking 1) Soldering area Dimensions in mm IND0088-3-E Taping and packing Reel 120.3 20.05 _0 12.4 +1.5 <_ 6.0 1.60.1 80.1 621.5 IND0350-S Direction of unreeling IND0564-H-E Dimensions in mm Please read Cautions and warnings and Important notes at the end of this document. 130.2 _2 330 +0 1.5+0.1 <_ 7.2 Component 18.4 max. 5.50.1 40.1 1.750.1 Blister tape 3 03/08 SMT inductors, SIMID series B82442A SIMID 2220-A Technical data and measuring conditions Rated inductance LR Measured with impedance analyzer Agilent 4294A at frequency fL, 0.1 V, 20 C Q factor Qmin Measured with impedance analyzer Agilent 4294A at frequency fQ, 20 C Rated temperature TR 105 C Rated current IR Maximum permissible DC with inductance decrease L/L0 10% and temperature increase of 20 K at rated temperature Self-resonance frequency fres,min Measured with network analyzer Agilent 8753D, 20 C DC resistance Rmax Measured at 20 C Solderability (lead-free) Sn95.5Ag3.8Cu0.7: (245 5) C, (5 0.3) s Wetting of soldering area 90% (based on IEC 60068-2-58) Resistance to soldering heat 260 C, 40 s (as referenced in JEDEC J-STD 020C) Climatic category 55/150/56 (to IEC 60068-1) Storage conditions Mounted: -55 C ... +150 C Packaged: -25 C ... +40 C, 75% RH Weight Approx. 0.4 g Please read Cautions and warnings and Important notes at the end of this document. 4 03/08 SMT inductors, SIMID series B82442A SIMID 2220-A Characteristics and ordering codes LR Ordering code1)2) f L; f Q IR Rmax fres,min MHz mA MHz 10 7.96 1800 0.024 95 B82442A1102K000 1.2 10 7.96 1700 0.028 70 B82442A1122K000 1.5 10 7.96 1600 0.032 55 B82442A1152K000 1.8 10 7.96 1400 0.040 47 B82442A1182K000 2.2 10 7.96 1300 0.048 42 B82442A1222K000 2.7 10 7.96 1200 0.056 37 B82442A1272K000 3.3 10 7.96 1120 0.064 34 B82442A1332K000 3.9 10 7.96 1050 0.072 32 B82442A1392K000 4.7 10 7.96 950 0.088 29 B82442A1472K000 5.6 10 7.96 880 0.104 26 B82442A1562K000 6.8 10 7.96 810 0.120 24 B82442A1682K000 8.2 10 7.96 750 0.144 22 B82442A1822K000 10 10 2.52 690 0.168 19 B82442A1103K000 12 10 2.52 630 0.20 17 B82442A1123K000 15 10 2.52 580 0.24 16 B82442A1153K000 18 10 2.52 530 0.29 14 B82442A1183K000 22 10 2.52 480 0.35 13 B82442A1223K000 27 10 2.52 440 0.42 11.5 B82442A1273K000 10 2.52 400 0.50 10.5 B82442A1333+000 10 2.52 370 0.58 9.5 B82442A1393+000 47 10 2.52 340 0.68 8.5 B82442A1473+000 56 10 2.52 310 0.80 7.8 B82442A1563+000 68 10 2.52 290 0.96 7.0 B82442A1683+000 82 10 2.52 270 1.12 6.4 B82442A1823+000 100 20 0.796 250 1.28 6.0 B82442A1104+000 120 20 0.796 230 1.52 5.4 B82442A1124+000 150 20 0.796 210 1.76 4.8 B82442A1154+000 180 20 0.796 190 2.24 4.4 B82442A1184+000 Tolerance Qmin H 1.0 10% 33 5% 39 10% ^ ^ K J ^ K Closer tolerances on request. Higher currents possible at temperatures <TR on request. Sample kit available. Ordering code: B82442X001 For more information refer to chapter "Sample kits". 1) Replace the + by the code letter for the required inductance tolerance. 2) For Ni-barrier-plated terminals replace the last two digits "00" by "50". Please read Cautions and warnings and Important notes at the end of this document. 5 03/08 SMT inductors, SIMID series B82442A SIMID 2220-A Characteristics and ordering codes LR Ordering code1)2) f L; f Q IR Rmax fres,min MHz mA MHz 20 0.796 170 2.72 3.9 B82442A1224+000 20 0.796 155 3.36 3.6 B82442A1274+000 330 20 0.796 140 3.92 3.2 B82442A1334+000 390 20 0.796 130 4.64 2.9 B82442A1394+000 470 20 0.796 120 5.60 2.6 B82442A1474+000 560 20 0.796 110 6.80 2.4 B82442A1564+000 680 20 0.796 100 8.00 2.2 B82442A1684+000 820 20 0.796 90 10.4 2.0 B82442A1824+000 1000 30 0.252 85 12.0 1.8 B82442A1105+000 1200 30 0.252 75 13.6 1.5 B82442A1125+000 1500 30 0.252 70 16.0 1.4 B82442A1155+000 1800 30 0.252 60 24.0 1.3 B82442A1185+000 2200 30 0.252 55 28.0 1.2 B82442A1225+000 2700 30 0.252 45 44.0 1.1 B82442A1275+000 3300 30 0.252 40 48.0 1.0 B82442A1335+000 3900 30 0.252 38 56.0 1.0 B82442A1395+000 4700 30 0.252 36 62.4 0.9 B82442A1475+000 5600 30 0.252 33 68.0 0.8 B82442A1565+000 6800 30 0.252 30 88.0 0.7 B82442A1685+000 8200 30 0.252 28 100 0.6 B82442A1825+000 10000 30 0.0796 25 120 0.5 B82442A1106+000 Tolerance Qmin H 220 5% 270 10% ^ J ^ K For telecommunications in blocking filter for 12- and 16-kHz counting pulses 980 3% 8 0.016 85 15 1.8 B82442A1984A000 1450 8 0.016 70 20 1.4 B82442A1145A500 2600 6 0.012 45 43 1.1 B82442A1265A000 3050 8 0.016 45 45 0.9 B82442A1305A500 5330 6 0.012 34 66 0.8 B82442A1535A300 ^ A Closer tolerances on request. Higher currents possible at temperatures <TR on request. Sample kit available. Ordering code: B82442X001 For more information refer to chapter "Sample kits". 1) Replace the + by the code letter for the required inductance tolerance. 2) For Ni-barrier-plated terminals replace the last two digits "00" by "50". Please read Cautions and warnings and Important notes at the end of this document. 6 03/08 SMT inductors, SIMID series B82442A SIMID 2220-A Inductance L versus DC load current IDC measured with LCR meter Agilent 4275A, typical values at 20 C Impedance |Z| versus frequency f measured with impedance analyzer Agilent 4191A/4194A, typical values at 20 C IND0089-B 10 6 B82442A | Z | 10 5 L 10 4 10 4 10 3 10 3 10 2 10 2 10 1 1 H 10 H 100 H 1000 H 10000 H 10 1 10 0 5 10 10 6 10 7 10 B82442A 10000 H 1000 H 100 H 10 H 1 H 10 0 8 Hz 10 f 10 9 _1 10 _2 10 _1 10 0 A 10 1 I DC Q factor versus frequency f measured with impedance analyzer Agilent 4191A/4194A, typical values at 20 C 80 IND0090-9 10 5 H Current derating Iop/IR versus ambient temperature TA (rated temperature TR = 105 C) IND0091-4 IND0092-V-E 1.2 B82442A Iop IR Q B82442A 1.0 60 0.8 40 0.6 0.4 20 0 10 4 1 H 10 H 100 H 1000 H 10000 H 10 5 0.2 10 6 10 7 0 Hz 10 8 f 7 0 03/08 20 40 60 80 100 120 C 160 TA Cautions and warnings Please note the r ecommendations in our Induc tors data book (latest edition) and in the data sheets. - Particular attention should be paid to the derating curves given there. - The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing. If the c omponents are to be washe d varnished it is necessary to check whether th e w ashing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In partic ular, it is poss ible for w ashing varni sh agent resid ues to have a negative effect in the long-term on wire insulation. The following points must be observed if the components are potted in customer applications: - Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. - It is nec essary to check whether the po tting material us ed atta cks or de stroys the wire insulation, plastics or glue. - The effect of the potting material can change the high-frequency behaviour of the components. Ferrites are sensitive to direct im pact. Thi s can ca use the core material to flake, or lea d to breakage of the core. Even for customer-specific products, conclusive validation of t he component in the c ircuit can only be carried out by the customer. Please read Cautions and warnings and Important notes at the end of this document. 8 03/08 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the s uitability of our products for certain areas of application. These statem ents are based on our knowledge of typical requirements that are often place d on our products in the areas of a pplication concerned. We nevertheless e xpressly po int out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In cus tomer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failu re of an el ectronic co mponent could endange r human l ife or he alth (e.g. in ac cident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the cu stomer application or othe r acti on tak en by the cu stomer (e.g. in stallation of protec tive circuitry or redundancy) that no injury or da mage is s ustained by third parties in the e vent of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to s atisfy c ertain technical requirements, some of the products de scribed in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they a re classed as haz ardous). Useful in formation on thi s wil l be fo und i n o ur Material D ata Sheets on the Internet (w ww.epcos.com/material). Should yo u have any mo re detailed questions, please contact our sales offices. 5. We constantly strive to imp rove our prod ucts. Consequently, the products desc ribed in this publication may cha nge fr om time to time . The s ame is true of th e corresponding product specifications. P lease c heck therefore to what extent produ ct des criptions and spec ifications contained in this publication are still applicable before or when you place an order. We a lso reserve the r ight t o discontinue production and delivery of products. Consequently, we can not guarantee that al l products named in thi s publication will always be available. The aforeme ntioned does n ot apply in the c ase o f indiv idual agreem ents dev iating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "Ge neral Terms of Delivery for Products and Services in the E lectrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorC ap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, S IKOREL, SilverCap, SIMDAD, SIM ID, SineFormer, SIOV, SIP5D , SIP 5K, Therm oFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 9 03/09