%BUB4IFFU%BUB4IFFU
© EPCOS AG 2008 . Reproduction, publication and dissemination of this p ublication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors
SIMID series, SIMID 2220-A
Series/Type: B82442A
Date: March 2008
203/08
Please read Cautions and warnings and
Important notes at the end of this document.
Size 2220 (EIA) or 5650 (IEC)
Rated inductance 1
N
H to 10000
N
H
Rated current 25 mA to 1800 mA
Construction
■Upright ferrite drum core
■Laser-welded winding
■Flame-retardant molding
Features
■Temperature range up to 150 °C
■Current handling capability up to 1.8 A
■High inductance ratings
■Qualified to AEC-Q200
■Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020C
■RoHS-compatible
Applications
■Filtering of supply voltages, coupling, decoupling
■DC/DC converters
■Automotive electronics
■Telecommunications
(e.g. blocking filter for 12- and 16-kHz counting pulses)
■Consumer electronics
■Industrial electronics
Terminals
■Base material CuSn6
■Layer composition Cu, Ag, Sn (lead-free)1)
■Electro-plated
Marking
■Marking on component:
Manufacturer, L value (in nH),
tolerance of L value (coded), date of manufacture (YWWD)
■Minimum data on reel:
Manufacturer, ordering code, L value, quantity, date of packing
Delivery mode and packing unit
■12-mm blister tape, wound on 330-mm ∅ reel
■Packing unit: 1500 pcs./reel
1) Ni-barrier-plated terminals on request (B82442A*50).
B82442ASMT inductors, SIMID series
SIMID 2220-A
303/08
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawing and layout recommendation
Taping and packing
Blister tape Reel
Dimensions in mm
IND0088-3-E
0.7±0.2
1)
1)
3.5±0.1
5+0.3
5.6+0.3 5+0.3
0.15 max.
0.7 min.
1)
Marking
1) Soldering area
IND0053-6
C
D
B
A
B
ABCD
4.5 2.0 4.0 8.0
Dimensions in mm
IND0564-H-E
4±0.1
2±0.05
1.75±0.1
<
_
7.2
1.5+0.1
8±0.1 1.6±0.1
5.5±0.1
12±0.3
6.0
<
_
Direction of unreeling
Component
IND0350-S
62±1.5
18.4 max. 13±0.2
+0
2
330
_
12.4 0
+1.5
_
B82442ASMT inductors, SIMID series
SIMID 2220-A
403/08
Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and measuring conditions
Rated inductance LRMeasured with impedance analyzer Agilent 4294A
at frequency fL, 0.1 V, 20 °C
Q factor Qmin Measured with impedance analyzer Agilent 4294A
at frequency fQ, 20 °C
Rated temperature TR105 °C
Rated current IRMaximum permissible DC with inductance decrease
ΔL/L0 ≤10% and temperature increase
of ≤ 20 K at rated temperature
Self-resonance frequency fres,min Measured with network analyzer Agilent 8753D, 20 °C
DC resistance Rmax Measured at 20 °C
Solderability (lead-free) Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s
Wetting of soldering area ≥ 90%
(based on IEC 60068-2-58)
Resistance to soldering heat 260 °C, 40 s (as referenced in JEDEC J-STD 020C)
Climatic category 55/150/56 (to IEC 60068-1)
Storage conditions Mounted: –55 °C … +150 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Weight Approx. 0.4 g
B82442ASMT inductors, SIMID series
SIMID 2220-A
503/08
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics and ordering codes
Closer tolerances on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82442X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50”.
LR
μH
Tolerance Qmin fL; fQ
MHz
IR
mA
Rmax
Ω
fres,min
MHz
Ordering code1)2)
1.0 ±10% K 10 7.96 1800 0.024 95 B82442A1102K000
1.2 10 7.96 1700 0.028 70 B82442A1122K000
1.5 10 7.96 1600 0.032 55 B82442A1152K000
1.8 10 7.96 1400 0.040 47 B82442A1182K000
2.2 10 7.96 1300 0.048 42 B82442A1222K000
2.7 10 7.96 1200 0.056 37 B82442A1272K000
3.3 10 7.96 1120 0.064 34 B82442A1332K000
3.9 10 7.96 1050 0.072 32 B82442A1392K000
4.7 10 7.96 950 0.088 29 B82442A1472K000
5.6 10 7.96 880 0.104 26 B82442A1562K000
6.8 10 7.96 810 0.120 24 B82442A1682K000
8.2 10 7.96 750 0.144 22 B82442A1822K000
10 10 2.52 690 0.168 19 B82442A1103K000
12 10 2.52 630 0.20 17 B82442A1123K000
15 10 2.52 580 0.24 16 B82442A1153K000
18 10 2.52 530 0.29 14 B82442A1183K000
22 10 2.52 480 0.35 13 B82442A1223K000
27 10 2.52 440 0.42 11.5 B82442A1273K000
33 ±5% J
±10% K
10 2.52 400 0.50 10.5 B82442A1333+000
39 10 2.52 370 0.58 9.5 B82442A1393+000
47 10 2.52 340 0.68 8.5 B82442A1473+000
56 10 2.52 310 0.80 7.8 B82442A1563+000
68 10 2.52 290 0.96 7.0 B82442A1683+000
82 10 2.52 270 1.12 6.4 B82442A1823+000
100 20 0.796 250 1.28 6.0 B82442A1104+000
120 20 0.796 230 1.52 5.4 B82442A1124+000
150 20 0.796 210 1.76 4.8 B82442A1154+000
180 20 0.796 190 2.24 4.4 B82442A1184+000
^
^
^
B82442ASMT inductors, SIMID series
SIMID 2220-A
603/08
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics and ordering codes
Closer tolerances on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82442X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50”.
LR
μH
Tolerance Qmin fL; fQ
MHz
IR
mA
Rmax
Ω
fres,min
MHz
Ordering code1)2)
220 ±5% J
±10% K
20 0.796 170 2.72 3.9 B82442A1224+000
270 20 0.796 155 3.36 3.6 B82442A1274+000
330 20 0.796 140 3.92 3.2 B82442A1334+000
390 20 0.796 130 4.64 2.9 B82442A1394+000
470 20 0.796 120 5.60 2.6 B82442A1474+000
560 20 0.796 110 6.80 2.4 B82442A1564+000
680 20 0.796 100 8.00 2.2 B82442A1684+000
820 20 0.796 90 10.4 2.0 B82442A1824+000
1000 30 0.252 85 12.0 1.8 B82442A1105+000
1200 30 0.252 75 13.6 1.5 B82442A1125+000
1500 30 0.252 70 16.0 1.4 B82442A1155+000
1800 30 0.252 60 24.0 1.3 B82442A1185+000
2200 30 0.252 55 28.0 1.2 B82442A1225+000
2700 30 0.252 45 44.0 1.1 B82442A1275+000
3300 30 0.252 40 48.0 1.0 B82442A1335+000
3900 30 0.252 38 56.0 1.0 B82442A1395+000
4700 30 0.252 36 62.4 0.9 B82442A1475+000
5600 30 0.252 33 68.0 0.8 B82442A1565+000
6800 30 0.252 30 88.0 0.7 B82442A1685+000
8200 30 0.252 28 100 0.6 B82442A1825+000
10000 30 0.0796 25 120 0.5 B82442A1106+000
For telecommunications in blocking filter for 12- and 16-kHz counting pulses
980 ±3% A 8 0.016 85 15 1.8 B82442A1984A000
1450 8 0.016 70 20 1.4 B82442A1145A500
2600 6 0.012 45 43 1.1 B82442A1265A000
3050 8 0.016 45 45 0.9 B82442A1305A500
5330 6 0.012 34 66 0.8 B82442A1535A300
^
^
^
B82442ASMT inductors, SIMID series
SIMID 2220-A
703/08
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent 4191A/4194A, typical values at 20 °C
Q factor versus frequency f
measured with impedance analyzer
Agilent 4191A/4194A, typical values at 20 °C
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4275A,
typical values at 20 °C
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = 105 °C)
IND0089-B
10
f
10 10 10 10Hz
Ω
59876
0
10
10
1
10
2
10
3
10
4
10
5
10
6
1 µH
10 µH
100 µH
1000 µH
10000 µH
B82442A
Z||
IND0091-4
10
f
10 10 10 10Hz
Q
48765
0
20
40
60
80
1 µH
10 µH
100 µH
1000 µH
10000 µH
B82442A
IND0090-9
10
I
A
µH
L
10
100
101
102
103
104
105
10 0
10 1
10
DC
10000 µH
1000 µH
100 µH
10 µH
1 µH
_
1
_
12
_
B82442A
IND0092-V-E
00
0.2
0.4
0.6
0.8
1.0
1.2
I
R
op
I
A
T
20 40 60 80 100 120 160
B82442A
C
B82442ASMT inductors, SIMID series
SIMID 2220-A
803/08
Cautions and warnings
■Please note the r ecommendations in our Induc tors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■If the c omponents are to be washe d varnished it is necessary to check whether th e washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In partic ular, it is poss ible for w ashing varni sh agent resid ues to have a
negative effect in the long-term on wire insulation.
■The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is nec essary to check whether the po tting material us ed atta cks or de stroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■Ferrites are sensitive to direct im pact. Thi s can ca use the core material to flake, or lea d to
breakage of the core.
■Even for customer-specific products, conclusive validation of t he component in the c ircuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
9 03/09
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the s uitability of our products for
certain areas of application. These statem ents are based on our knowledge of typical
requirements that are often place d on our products in the areas of a pplication concerned. We
nevertheless e xpressly po int out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failu re of an el ectronic co mponent could endange r human l ife or he alth (e.g. in ac cident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or othe r action tak en by the customer (e.g. in stallation of protec tive
circuitry or redundancy) that no injury or da mage is sustained by third parties in the e vent of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to s atisfy c ertain technical requirements, some of the products de scribed in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they a re classed as haz ardous). Useful in formation on thi s wil l be fo und i n o ur
Material D ata Sheets on the Internet (w ww.epcos.com/material). Should yo u have any mo re
detailed questions, please contact our sales offices.
5. We constantly strive to imp rove our prod ucts. Consequently, the products desc ribed in this
publication may cha nge fr om time to time . The s ame is true of th e corresponding product
specifications. P lease c heck therefore to what extent produ ct des criptions and spec ifications
contained in this publication are still applicable before or when you place an order.
We a lso reserve the r ight t o discontinue production and delivery of products.
Consequently, we can not guarantee that al l products named in thi s publication will always be
available.
The aforeme ntioned does n ot apply in the c ase o f indiv idual agreem ents dev iating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “Ge neral Terms of Delivery for Products and Services in the E lectrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorC ap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, S IKOREL,
SilverCap, SIMDAD, SIM ID, SineFormer, SIOV, SIP5D , SIP 5K, Therm oFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.