SMAJ5.0e3 to SMAJ440CAe3 400W Transient Voltage Suppressor (TVS) protection device Main product characteristics VWM 5.0V - 440V VBR(min) - VBR(max) 6.40V - 543V IPP 41.7A - 0.6A VCL(MAX) 9.6V - 713V PPP 400W RoHS COMPLIANT DO-214AC (SMA) Description and applications This device has the ability to clamp dangerous high voltage, short term transients such as produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. Response time of clamping action is virtually instantaneous. As a result, they may also be used effectively for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4 or for inductive switching environments and induced RF. They can also be used for protecting other sensitive components from secondary lightning effects per IEC61000-4-5 and class levels defined herein. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. * RoHS compliant (2002/95/EC), MSL level 1 (J-STD-020) * Qualified to automotive grade - AEC Q101 * Bi-directional devices are denoted by the suffixes C or CA, electrical characteristics apply in both directions. Maximum ratings and characteristics(1) Symbol PPPM IPPM Peak power dissipation with a 10/1000s waveform (2)(3) (fig.1) (2) Value Unit 400 W See next table A 1.0 W 40 A 3.5 / 5.0 V 30 C/W 120 C/W RJL Peak pulse current with a 10/1000s waveform (fig. 3) Steady state power dissipation at TL = 75C, lead lengths 0.375" (9.5mm) (3) Non repetitive peak forward surge current (8.3ms single half sine wave) unidirectional only (4) Maximum instantaneous forward voltage at 25A for unidirectional only (5) Typical thermal resistance junction to lead RJA Typical thermal resistance junction to ambient TSTG Storage temperature -55 to +150 C TJ Junction temperature -55 to +150 C PM(AV) IFSM VF (1) (2) (3) (4) (5) Parameter All ratings at 25C unless specified otherwise Non-repetitive current pulse, per Fig. 3 and derated above TA = 25C per Fig. 2. rating is 300W above 78V. Mounted on copper pad area of 0.2" x 0.2" (5.0mm x 5.0mm) Mounted on minimum recommended pad layout VF=3.5V for devices of VBR < 220V and VF=5.0V maximum for devices of VBR > 220V Copyright (c) 2010 Mar Rev C www.Microsemi.com 1/6 SMAJ5.0e3 to SMAJ440CAe3 400W Transient Voltage Suppressor (TVS) protection device Electrical characteristics(1) DEVICE SMAJ5.0e3 / SMAJ5.0Ce3 SMAJ5.0Ae3 / SMAJ5.0CAe3 (5) SMAJ6.0e3 / SMAJ6.0Ce3 SMAJ6.0Ae3 / SMAJ6.0CAe3 SMAJ6.5e3 / SMAJ6.5Ce3 SMAJ6.5Ae3 / SMAJ6.5CAe3 SMAJ7.0e3 / SMAJ7.0Ce3 SMAJ7.0Ae3 / SMAJ7.0CAe3 SMAJ7.5e3 / SMAJ7.5Ce3 SMAJ7.5Ae3 / SMAJ7.5CAe3 SMAJ8.0e3 / SMAJ8.0Ce3 SMAJ8.0Ae3 / SMAJ8.0CAe3 SMAJ8.5e3 / SMAJ8.5Ce3 SMAJ8.5Ae3 / SMAJ8.5CAe3 SMAJ9.0e3 / SMAJ9.0Ce3 SMAJ9.0Ae3 / SMAJ9.0CAe3 SMAJ10e3 / SMAJ10Ce3 SMAJ10Ae3 / SMAJ10CAe3 SMAJ11e3 / SMAJ11Ce3 SMAJ11Ae3 / SMAJ11CAe3 SMAJ12e3 / SMAJ12Ce3 SMAJ12Ae3 / SMAJ12CAe3 SMAJ13e3 / SMAJ13Ce3 SMAJ13Ae3 / SMAJ13CAe3 SMAJ14e3 / SMAJ14Ce3 SMAJ14Ae3 / SMAJ14CAe3 SMAJ15e3 / SMAJ15Ce3 SMAJ15Ae3 / SMAJ15CAe3 SMAJ16e3 / SMAJ16Ce3 SMAJ16Ae3 / SMAJ16CAe3 SMAJ17e3 / SMAJ17Ce3 SMAJ17Ae3 / SMAJ17CAe3 SMAJ18e3 / SMAJ18Ce3 SMAJ18Ae3 / SMAJ18CAe3 SMAJ20e3 / SMAJ20Ce3 SMAJ20Ae3 / SMAJ20CAe3 SMAJ22e3 / SMAJ22Ce3 SMAJ22Ae3 / SMAJ22CAe3 BREAKDOWN (2) MAXIMUM MAXIMUM PEAK MAXIMUM TEST VOLTAGE , VBR STAND-OFF STANDBY PULSE CLAMPING VBR (V) @ IT (mA) CURRENT IT VOLTAGE VWM CURRENT (4) ID CURRENT (3) IPP VOLTAGE VC (V) (V) (mA) (A) @ VWM (A) @ IPP Device marking code UNI BI MAD MAE MAF MAG MAH MAK MAL MAM MAN MAP MAQ MAR MAS MAT MAU MAV MAW MAX MAY MAZ MBD MBE MBF MBG MBH MBK MBL MBM MBN MBP MBQ MBR MBS MBT MBU MBV MBW MBX MWD MWE MWF MWG MWH MWK MWL MWM MWN MWP MWQ MWR MWS MWT MWU MWV MWW MWX MWY MWZ MXD MXE MXF MXG MXH MXK MXL MXM MXN MXP MXQ MXR MXS MXT MXU MXV MXW MXX Min Max 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 7.82 7.07 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 800 800 800 800 500 500 200 200 100 100 50 50 10 10 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 41.7 43.5 35.1 38.8 32.5 35.7 30.1 33.3 28.0 31.0 26.7 29.4 25.2 27.8 23.7 26.0 21.3 23.5 19.9 22.0 18.2 20.1 16.8 18.6 15.5 17.2 14.9 16.4 13.9 15.4 13.1 14.5 12.4 13.7 11.2 12.3 10.2 11.3 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 (1) All ratings at 25C unless specified otherwise (2) VBR measured after IT applied for 300s, IT=square wave pulse or equivalent (3) Surge current waveform per Fig.3 and derated per Fig.2 (4) For bidrectional types with VWM of 10 volts and less, the ID limit is doubled (5) For the bidirectional SMAJ5.0CA, the maximum VBR is 7.25V Copyright (c) 2010 Mar Rev C www.Microsemi.com 2/6 SMAJ5.0e3 to SMAJ440CAe3 400W Transient Voltage Suppressor (TVS) protection device Electrical characteristics (cont.)(1) DEVICE SMAJ24e3 / SMAJ24Ce3 SMAJ24Ae3 / SMAJ24CAe3 SMAJ26e3 / SMAJ26Ce3 SMAJ26Ae3 / SMAJ26CAe3 SMAJ28e3 / SMAJ28Ce3 SMAJ28Ae3 / SMAJ28CAe3 SMAJ30e3 / SMAJ30Ce3 SMAJ30Ae3 / SMAJ30CAe3 SMAJ33e3 / SMAJ33Ce3 SMAJ33Ae3 / SMAJ33CAe3 SMAJ36e3 / SMAJ36Ce3 SMAJ36Ae3 / SMAJ36CAe3 SMAJ40e3 / SMAJ40Ce3 SMAJ40Ae3 / SMAJ40CAe3 SMAJ43e3 / SMAJ43Ce3 SMAJ43Ae3 / SMAJ43CAe3 SMAJ45e3 / SMAJ45Ce3 SMAJ45Ae3 / SMAJ45CAe3 SMAJ48e3 / SMAJ48Ce3 SMAJ48Ae3 / SMAJ48CAe3 SMAJ51e3 / SMAJ51Ce3 SMAJ51Ae3 / SMAJ51CAe3 SMAJ54e3 / SMAJ54Ce3 SMAJ54Ae3 / SMAJ54CAe3 SMAJ58e3 / SMAJ58Ce3 SMAJ58Ae3 / SMAJ58CAe3 SMAJ60e3 / SMAJ60Ce3 SMAJ60Ae3 / SMAJ60CAe3 SMAJ64e3 / SMAJ64Ce3 SMAJ64Ae3 / SMAJ64CAe3 SMAJ70e3 / SMAJ70Ce3 SMAJ70Ae3 / SMAJ70CAe3 SMAJ75e3 / SMAJ75Ce3 SMAJ75Ae3 / SMAJ75CAe3 SMAJ78e3 / SMAJ78Ce3 SMAJ78Ae3 / SMAJ78CAe3 SMAJ85e3 / SMAJ85Ce3 SMAJ85Ae3 / SMAJ85CAe3 BREAKDOWN (2) MAXIMUM MAXIMUM PEAK MAXIMUM TEST VOLTAGE , VBR STAND-OFF STANDBY PULSE CLAMPING VBR (V) @ IT (mA) CURRENT IT VOLTAGE VWM CURRENT (4) ID CURRENT (3) IPP VOLTAGE VC (V) (V) (mA) (A) @ VWM (A) @ IPP Device marking code UNI BI MBY MBZ MCD MCE MCF MCG MCH MCK MCL MCM MCN MCP MCQ MCR MCS MCT MCU MCV MCW MCX MCY MCZ MRD MRE MRF MRG MRH MRK MRL MRM MRN MRP MRQ MRR MRS MRT MRU MRV MXY MXZ MYD MYE MYF MYG MYH MYK MYL MYM MYN MYP MYQ MYR MYS MYT MYU MYV MYW MYX MYY MYZ MZD MZE MZF MZG MZH MZK MZL MZM MZN MZP MZQ MZR MZS MZT MZU MZV Min Max 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 66.7 71.1 71.1 77.8 77.8 83.3 83.3 86.7 86.7 94.4 94.4 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 58.4 52.8 61.1 55.3 65.1 58.9 69.3 62.7 73.3 66.3 78.7 71.2 81.5 73.7 86.9 78.6 95.1 86.0 102 92.1 106 95.8 115 104 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 9.3 10.3 8.6 9.5 8.0 8.8 7.5 8.3 6.8 7.5 6.2 6.9 5.6 6.2 5.2 5.8 5.0 5.5 4.7 5.2 4.4 4.9 4.2 4.6 3.9 4.3 3.7 4.1 3.5 3.9 3.2 3.5 3.0 3.3 2.9 3.2 2.0 2.2 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 (1) All ratings at 25C unless specified otherwise (2) VBR measured after IT applied for 300s, IT=square wave pulse or equivalent (3) Surge current waveform per Fig.3 and derated per Fig.2 (4) For bidrectional types with VWM of 10 volts and less, the ID limit is doubled Copyright (c) 2010 Mar Rev C www.Microsemi.com 3/6 SMAJ5.0e3 to SMAJ440CAe3 400W Transient Voltage Suppressor (TVS) protection device Electrical characteristics (cont.)(1) DEVICE SMAJ90e3 / SMAJ90Ce3 SMAJ90Ae3 / SMAJ90CAe3 SMAJ100e3 / SMAJ100Ce3 SMAJ100Ae3 / SMAJ100CAe3 SMAJ110e3 / SMAJ110Ce3 SMAJ110Ae3 / SMAJ110CAe3 SMAJ120e3 / SMAJ120Ce3 SMAJ120Ae3 / SMAJ120CAe3 SMAJ130e3 / SMAJ130Ce3 SMAJ130Ae3 / SMAJ130CAe3 SMAJ150e3 / SMAJ150Ce3 SMAJ150Ae3 / SMAJ150CAe3 SMAJ160e3 / SMAJ160Ce3 SMAJ160Ae3 / SMAJ160CAe3 SMAJ170e3 / SMAJ170Ce3 SMAJ170Ae3 / SMAJ170CAe3 SMAJ180Ae3 / SMAJ180CAe3 SMAJ200Ae3 / SMAJ200CAe3 SMAJ220Ae3 / SMAJ220CAe3 SMAJ250Ae3 / SMAJ250CAe3 SMAJ300Ae3 / SMAJ300CAe3 SMAJ350Ae3 / SMAJ350CAe3 SMAJ400Ae3 / SMAJ400CAe3 SMAJ440Ae3 / SMAJ440CAe3 BREAKDOWN (2) MAXIMUM MAXIMUM PEAK MAXIMUM TEST VOLTAGE , VBR STAND-OFF STANDBY PULSE CLAMPING VBR (V) @ IT (mA) CURRENT IT VOLTAGE VWM CURRENT (4) ID CURRENT (3) IPP VOLTAGE VC (V) (V) (mA) (A) @ VWM (A) @ IPP Device marking code UNI BI MRW MRX MRY MRZ MSD MSE MSF MSG MSH MSK MSL MSM MSN MSP MSQ MSR MST MSV MSX MSZ MTE MTG MTK MTM MZW MZX MZY MZZ MVD MVE MVF MVG MVH MVK MVL MVM MVN MVP MVQ MVR MVT MVV MVX MVZ MUE MUG MUK MUM Min Max 100 100 111 111 122 122 133 133 144 144 167 167 178 178 189 189 201 224 246 279 335 391 447 492 122 111 136 123 149 135 163 147 176 159 204 185 218 197 231 209 222 247 272 309 371 432 494 543 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 180 200 220 250 300 350 400 440 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.9 2.1 1.7 1.9 1.5 1.7 1.4 1.6 1.3 1.4 1.1 1.2 1.0 1.2 0.99 1.09 1.4 1.2 1.1 1.0 0.8 0.7 0.6 0.6 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 292 324 356 405 486 567 648 713 (1) All ratings at 25C unless specified otherwise (2) VBR measured after IT applied for 300s, IT=square wave pulse or equivalent (3) Surge current waveform per Fig.3 and derated per Fig.2 (4) For bidrectional types with VWM of 10 volts and less, the ID limit is doubled Copyright (c) 2010 Mar Rev C www.Microsemi.com 4/6 SMAJ5.0e3 to SMAJ440CAe3 400W Transient Voltage Suppressor (TVS) protection device Copyright (c) 2010 Mar Rev C www.Microsemi.com 5/6 SMAJ5.0e3 to SMAJ440CAe3 400W Transient Voltage Suppressor (TVS) protection device Mechanical Characteristics Physical dimensions Package materials & information Footprint dimensions Case : Epoxy meets UL94V-0 Electrode finish : Matte Sn plating fully RoHS compliant Terminals : solderable per MIL-STD-750, Method 2026 Marking code : See electrical characteristics table and example below: POLARITY : For unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal TVS operation. Ordering information Product order code Package Weight Base qty Delivery mode DO-214AC (SMA) 0.002oz. 0.064g 5000 Tape and reel (13 inch) SMAJxxxxe3/TR13 For example : SMAJ18CAe3/TR13 or SMAJ6.8Ae3/TR13 Commercial Business Unit Microsemi Corporation Microsemi Commercial Offshore de Macau Limitada Avenida Doutor Mario Soares Bank of China Building, 18/F, Unit D Macau SAR Copyright (c) 2010 Mar Rev C Please refer to www.microsemi.com for the terms and conditions of purchase www.Microsemi.com 6/6