PTN
Vishay Thin Film
Document Number: 60026 For technical questions, contact: thin-film@vishay.com www.vishay.com
Revision: 23-Jan-09 55
Commercial Thin Film Chip Resistors
SURFACE MOUNT
CHIPS
These chip resistors are available in both “top side” and
“wraparound” termination styles in a variety of sizes. They
incorporate self passivated, enhanced Tantalum Nitride
films, to give superior performance on moisture resistance,
voltage coefficient, power handling and resistance stability.
The terminations consist of an adhesion layer, a leach
resistant nickel barrier, and solder coating. This product will
out-perform all requirements of characteristic H of
MIL-PRF-55342.
CONSTRUCTION
FEATURES
Lead (Pb)-free or Sn/Pb terminations available
Moisture resistant
High purity alumina substrate
Non-standard values available
Will pass + 85 °C, 85 % relative humidity and
10 % rated power
100 % visual inspected per MIL-PRF-55342
Very low noise and voltage coefficient (< - 30 dB)
Non-inductive
Laser-trimmed tolerances to ± 0.1 %
Wraparound resistance less than 10 mΩ
Epoxy bondable termination available
TYPICAL PERFORMANCE
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
* Pb containing terminations are not RoHS compliant, exemptions may apply
Actual Size
1505
Adhesion layer
High Purity
Alumina Substrate
Nickel barrie
r
Solder
coating
Passivation
T antalum Nitride
Resistive Film
ABS
TCR 25
TOL 0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Tantalum nitride
Absolute TCR ± 25 ppm/°C, ± 50 ppm/°C, ± 100 ppm/°C - 55 °C to + 125 °C
Absolute Tolerance ± 1.0 %, ± 0.5 % and ± 0.1 % + 25 °C
Operating Temperature Range - 55 °C to + 125 °C
Noise < - 25 dB
CASE SIZE POWER RATING (mW) MAX. WORKING VOLTAGE RESISTANCE RANGE - (Ω)
0402 50 75 20 - 35K
0502 100 75 20 - 65K
0505 150 75 20 - 130K
0603 150 75 10 - 80K
0805 (1), 0705 (1) 200 100 10 - 301K
1005 250 100 10 - 301K
1010 500 150 50 - 600K
1206 400 200 10 - 1M
1505 400 150 10 - 1M
2208 750 150 10 - 1.75M
2010 800 200 10 - 2M
2512 1000 200 10 - 3M
Available
Pb-free
RoHS*
COMPLIANT
PTN
Vishay Thin Film Commercial Thin Film Chip Resistors
www.vishay.com For technical questions, contact: thin-film@vishay.com Document Number: 60026
56 Revision: 23-Jan-09
SURFACE MOUNT
CHIPS
DIMENSIONS in inches
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
CASE SIZE TERM L W T D E
0402 B 0.042 ± 0.008 0.022 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.010 ± 0.005
0502 B 0.055 ± 0.006 0.025 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005
0505 B 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005
0603 B 0.064 ± 0.006 0.032 ± 0.005 0.020 Max. 0.012 ± 0.005 0.015 ± 0.005
0805 (1), 0705 (1) B 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1005 B 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1010 B 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1206 B 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010
1505 B 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
2010 B 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2208 B 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2512 B 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
ENVIRONMENTAL TESTS (VISHAY PERFORMANCE VS. MIL-PRF-55342 REQUIREMENTS)
ENVIRONMENTAL TEST LIMITS MIL-PRF-55342
CHARACTERISTIC “H”
TYPICAL VISHAY
PERFORMANCE
Resistance Temperature Characteristic ± 50 ppm/°C ± 35 ppm/°C
Max. Ambient Temp. at Rated Wattage + 70 °C + 70 °C
Max. Ambient Temp. at Power Derating + 150 °C + 150 °C
Thermal Shock ΔR± 0.25 % ± 0.040 %
Low Temperature Operation ΔR ± 0.25 % ± 0.005 %
Short Time Overload ΔR ± 0.10 % ± 0.010 %
High Temperature Exposure ΔR± 0.20 % ± 0.150 %
Resistance to Bonding Exposure ΔR± 0.25 % ± 0.005 %
Moisture Resistance ΔR± 0.40 % ± 0.029 %
Life + 70 °C at 1000 hours ΔR± 0.50 % ± 0.035 %
Insulation Resistance Ω10 000 Minimum > 100 000 MΩ
D
W
L
T
E
PTN
Commercial Thin Film Chip Resistors Vishay Thin Film
Document Number: 60026 For technical questions, contact: thin-film@vishay.com www.vishay.com
Revision: 23-Jan-09 57
SURFACE MOUNT
CHIPS
FILM LOAD LIFE STABILITY (at + 125 °C) DERATING CURVE
0.1 %
0.06 %
0.05 %
0.04 %
0.03 %
0.02 %
0.01 %
0.006 %
0.005 %
0.004 %
0.003 %
0.002 %
0.001 %
1000 1200 1400 1600 1800 2000
Time in h at + 125 °C
Maximum
Absolute
Change
800600400200
Ambient Temperature °C
0 70 125 150
0
20
40
60
80
100
Percent of Rated Power
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PTN1206E1002BBT1 (preferred part number format)
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING
PTN 0402
0502
0505
0603
0805
1005
1010
1206
1505
2208
2010
2512
E = ± 25 ppm/°C
H = ± 50 ppm/°C
K = ± 100 ppm/°C
< 50 Ω
± 100 ppm/°C
best
The first 3 digits
are significant
figures and the
last digit specifies
the number of
zeros to follow.
“R” designates
the decimal point.
Example:
10R0 = 10 Ω
1000 = 100 Ω
1001 = 1 kΩ
B = ± 0.1 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
B = Wraparound
Sn/Pb solder
63 % Sn/ 37 % Pb
w/ nickel barrier
G = Wraparound Au
over Ni (gold)
termination
epoxy bondable
RoHS compliant - e4
S = Wraparound lead
(Pb)-free solder
96.5 % Sn/3.0 %Ag/
0.5 % Cu
RoHS compliant - e1
BS = BULK
100 Min 1 Mult
WS = WAFFLE
100 Min 1 Mult
TAPE AND REEL
T0 = 100 Min 100 Mult
T1 = 1000 Min 1000 Mult
T3 = 300 Min 300 Mult
T5 = 500 Min 500 Mult
TF = Full Reel
TS = 100 Min 1 Mult
Historical Part Number example: PTN0805H8801BBT
PTN 0805 H 8801 B B T
STYLE CASE SIZE TCR
CHARACTERISTIC
OHMIC VALUE TOLERANCE TERMINATION PACKAGING
06E1 02B01 BT1NPT 2
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.