(R) This capacitor series was designed for AC and pulsing applications. The units are rated for 135 VRMS and 67 VRMS (to 400 Hz), but may also be used for all DC applications up to 200 VDC and 400 VDC respectively. A wide range of sizes and styles is available. You can choose from axiallead wrap and fill in oval and round configurations or rectangular epoxy case with axial and radial leads. Two types of dielectric material are used: metallized polypropylene and polypropylene and foil. Metallized versions are offered in all styles. METALLIZED POLYPROPYLENE CAPACITORS 935 SERIES Polypropylene and foil capacitors may also be specified in all standard styles. All capacitors feature extended foil construction and standard tin-coated copper-clad steel leads. Nickel, copper, dumet and other special leads are available. Protective clear wrap is offered on all wrap and fill units. The potting material and endfills of Electrocube's capacitors meet or exceed the flammability requirements of UL94VO. Dimensional variations for all MFD values are available with the same volume to meet your design requirements. SPECIFICATIONS Temperature: -55C to +85C at rated voltage; to +105C TYPICAL DIELECTRIC CHARACTERISTIC CURVES 300 VDC and 600 VDC on 67 VAC, 135 VAC and 270 VAC respectively at 25C for a period not to exceed 1 minute; current limited to 5 mA. DC Life Tests*: Will withstand the application of 138 VDC, 280 VDC and 560 VDC, respectively, on the 67 VRMS, 135 VRMS and 270 VRMS parts at 105C for 250 hrs., with not more than 1 failure in in 12 permitted, current limited to 5 mA. Dissipation Factor: Shall not exceed 0.1% at 25C for values to 1 mfd; 0.2% for values over 1 mfd. % CAPACITANCE CHANGE with 50% voltage derating. Dielectric Voltage Test: Will withstand the application of 150 VDC, Dielectric Absorption: Shall not exceed 0.1% at 25C per and dissipation factor shall be 1000 Hz for values up to 1 mfd and 120 Hz for values of 1.0 mfd and up. Insulation Resistance: At DC voltages of 100 VDC (67 VAC), 200 VDC (135 VAC), 400 VDC (270 VAC), 1000 VDC (660 VAC), units shall meet the minimum values below: *For DC life test criteria, consult the factory. NOTES: For information regarding insulating sleeves, mountings, special terminals, non-standard leads, circuit connections and other hardware, please consult factory. For styles and ratings not shown, or for unusual requirements necessitated by special circuit applications (including higher IR or lower DF), consult the factory direct. All Electrocube film capacitors have endfills and tape that meet or exceed the flammability requirements of UL94V0. (R) INSULATION RESISTANCE (MEGOHMS TIMES MICROFARADS) Acceptance Criteria: Measurement frequency for capacitance % DISSIPATION FACTOR MIL-C-19978. 3366 Pomona Blvd. * Pomona, CA 91768 * TEL: (909) 595-4037 * FAX: (909) 595-0186 e-mail: esales@electrocube.com * Internet: www.electrocube.com * (IR: 9/99) METALLIZED POLYPROPYLENE CAPACITORS 935 SERIES (R) SERIES NO. 931A 932A (R) DESCRIPTION FLAME RETARDANT EPOXY CASE, RECTANGULAR AXIAL LEADS FLAME RETARDANT EPOXY CASE, RECTANGULAR RADIAL LEADS 935B FLAME RETARDANT WRAP AND FILL, OVAL 935D FLAME RETARDANT WRAP AND FILL, ROUND 3366 Pomona Blvd. * Pomona, CA 91768 * TEL: (909) 595-4037 * FAX: (909) 595-0186 e-mail: esales@electrocube.com * Internet: www.electrocube.com * (IR: 9/99) METALLIZED POLYPROPYLENE 931A SERIES (R) EPOXY CASE RECTANGULAR CONFIGURATION For max. T, W and L dimensions, allow + .010". LEAD LENGTH: 1.5" MIN. 100 VOLT DC/67 VAC DIMENSIONS MFD LEAD SIZE 200 VOLT DC/135 VAC DIMENSIONS PART NO. T W L (AWG) PART NO. T W L .0010 931A1B102* .17 .27 .49 24 931A1C102* .17 .29 .0015 931A1B152* .17 .27 .49 24 931A1C152* .17 .0022 931A1B222* .17 .27 .49 24 931A1C222* .0033 931A1B332* .17 .27 .49 24 .0047 931A1B472* .17 .27 .49 .0068 931A1B682* .17 .27 .0082 931A1B822 .17 .010 931A1B103* .015 LEAD SIZE 400 VOLT DC/270 VAC DIMENSIONS (AWG) PART NO. .42 24 .29 .42 .17 .29 931A1C332* .17 24 931A1C472* .49 24 .27 .49 .17 .27 931A1B153* .17 .022 931A1B223* .033 LEAD SIZE T W L (AWG) 931A1E102* .17 .29 .42 24 24 931A1E152* .17 .29 .42 24 .42 24 931A1E222* .17 .29 .42 24 .29 .42 24 931A1E332* .17 .29 .42 24 .17 .29 .42 24 931A1E472* .17 .29 .42 24 931A1C682* .17 .29 .42 24 931A1E682* .17 .29 .42 24 24 931A1C822* .17 .29 .42 24 931A1E822* .17 .29 .55 24 .49 24 931A1C103* .17 .29 .42 24 931A1E103* .17 .29 .55 24 .27 .49 24 931A1C153* .17 .29 .55 24 931A1E153* .23 .36 .55 24 .17 .27 .49 24 931A1C223* .17 .29 .55 24 931A1E223* .23 .36 .55 24 931A1B333* .17 .29 .55 24 931A1C333* .17 .29 .55 24 931A1E333* .29 .42 .55 24 .047 931A1B473* .17 .29 .55 24 931A1C473* .23 .36 .55 24 931A1E473* .29 .42 .67 24 .068 931A1B683* .17 .29 .55 24 931A1C683* .23 .36 .55 24 931A1E683* .29 .42 .67 24 .082 931A1B823 .17 .29 .55 24 931A1C823* .29 .42 .55 24 931A1E823* .29 .42 .82 22 .10 931A1B104* .23 .36 .55 24 931A1C104* .29 .42 .55 24 931A1E104* .39 .54 .82 22 .15 931A1B154* .23 .36 .55 24 931A1C154* .29 .42 .67 24 931A1E154* .39 .54 .82 22 .22 931A1B224* .29 .42 .55 24 931A1C224* .29 .42 .82 24 931A1E224* .39 .54 1.04 22 .33 931A1B334* .29 .42 .67 24 931A1C334* .39 .54 .82 22 931A1E334* .39 .54 1.24 22 .47 931A1B474* .29 .42 .82 24 931A1C474* .39 .54 1.04 22 931A1E474* .56 .72 1.24 20 .68 931A1B684* .39 .54 .82 22 931A1C684* .39 .54 1.24 22 931A1ED684* .56 .72 1.24 20 .82 931A1B824* .39 .54 .82 22 931A1C824* .39 .54 1.24 22 931A1E824* .56 .72 1.75 20 1.0 931A1B105* .39 .54 1.24 22 931A1C105* .56 .72 1.24 20 931A1E105* .56 .72 1.75 20 2.0 931A1B205* .56 .72 1.24 20 931A1C205* .56 .72 1.75 20 931A1E205* - - - - 5.0 931A1B505* .56 .72 1.75 20 931A1C505* - - - - 931A1E505* - - - - *Add tolerance designator to complete part number: F = 1%, G = 2%, J = 5%, K = 10%, M = 20% (R) 3366 Pomona Blvd. * Pomona, CA 91768 * TEL: (909) 595-4037 * FAX: (909) 595-0186 e-mail: esales@electrocube.com * Internet: www.electrocube.com * (IR: 9/99) METALLIZED POLYPROPYLENE 932A SERIES (R) EPOXY CASE RECTANGULAR CONFIGURATION For max. T, W and L dimensions, allow +.010". For max. S dimensions, allow +.015". 100 VOLT DC/67 VAC DIMENSIONS MFD PART NO. T W L S LEAD SIZE (AWG) 200 VOLT DC/135 VAC DIMENSIONS PART NO. T W L LEAD SIZE S (AWG) 400 VOLT DC/270 VAC DIMENSIONS PART NO. T W L S LEAD SIZE (AWG) .0010 932A1B102* .18 .30 .42 .300 22 932A1C102* .18 .30 .42 .300 22 932A1E102* .18 .30 .42 .300 22 .0015 932A1B152* .18 .30 .42 .300 22 932A1C152* .18 .30 .42 .300 22 932A1E152* .18 .30 .42 .300 22 .0022 932A1B222* .18 .30 .42 .300 22 932A1C222* .18 .30 .42 .300 22 932A1E222* .18 .30 .42 .300 22 .0033 932A1B332* .18 .30 .42 .300 22 932A1C332* .18 .30 .42 .300 22 932A1E332* .18 .30 .42 .300 22 .0047 932A1B472* .18 .30 .42 .300 22 932A1C472* .18 .30 .42 .300 22 932A1E472* .18 .30 .42 .300 22 .0068 932A1B682* .18 .30 .42 .300 22 932A1C682* .18 .30 .42 .300 22 932A1E682* .18 .30 .42 .300 22 .0082 932A1B822* .18 .30 .42 .300 22 932A1C822* .18 .30 .42 .300 22 932A1E822* .18 .30 .55 .400 22 .010 932A1B103* .18 .30 .42 .300 22 932A1C103* .18 .30 .42 .300 22 932A1E103* .18 .30 .55 .400 22 .015 932A1B153* .18 .30 .42 .300 22 932A1C153* .18 .30 .55 .400 22 932A1E153* .24 .37 .55 .400 22 .022 932A1B223* .18 .30 .42 .300 22 932A1C223* .18 .30 .55 .400 22 932A1E223* .24 .37 .55 .400 22 .033 932A1B333* .18 .30 .55 .400 22 932A1C333* .18 .30 .55 .400 22 932A1E333* .30 .43 .55 .400 22 .047 932A1B473* .18 .30 .55 .400 22 932A1C473* .24 .37 .55 .400 22 932A1E473* .30 .43 .67 .500 22 .068 932A1B683* .18 .30 .55 .400 22 932A1C683* .24 .37 .55 .400 22 932A1E683* .30 .43 .67 .500 22 .082 932A1B823* .18 .30 .55 .400 22 932A1C823* .30 .43 .55 .400 22 932A1E823* .30 .43 .82 .600 22 .10 932A1B104* .24 .37 .55 .400 22 932A1C104* .30 .43 .55 .400 22 932A1E104* .40 .55 .82 .600 20 .15 932A1B154* .24 .37 .55 .400 22 932A1C154* .30 .43 .67 .500 22 932A1E154* .40 .55 .82 .600 20 .22 932A1B224* .30 .43 .55 .400 22 932A1C224* .30 .43 .82 .600 22 932A1E224* .40 .55 1.04 .800 20 .33 932A1B334* .30 .43 .67 .500 22 932A1C334* .40 .55 .82 .600 22 932A1E334* .40 .55 1.24 1.100 20 .47 932A1B474* .30 .43 .82 .600 22 932A1C474* .40 .55 1.04 .800 20 932A1E474* .57 .73 1.24 1.100 20 .68 932A1B684* .40 .55 .82 .600 20 932A1C684* .40 .55 1.24 1.100 20 932A1E684* .57 .73 1.24 1.100 20 .82 932A1B824* .40 .55 .82 .600 20 932A1C824* .40 .55 1.24 1.100 20 932A1E824* .57 .73 1.75 1.600 20 1.0 932A1B105* .40 .55 1.24 1.100 20 932A1C105* .57 .73 1.24 1.100 20 932A1E105* .57 .73 1.75 1.600 20 2.0 932A1B205* .57 .73 1.24 1.100 20 932A1C205* .57 .73 1.75 1.600 20 932A1E205* .63 1.00 1.75 1.600 20 5.0 932A1B505* .57 .73 1.75 1.600 20 932A1C505* - - 932A1E505* - - - - - - - - *Add tolerance designator to complete part number: F = 1%, G = 2%, J = 5%, K = 10%, M = 20% (R) 3366 Pomona Blvd. * Pomona, CA 91768 * TEL: (909) 595-4037 * FAX: (909) 595-0186 e-mail: esales@electrocube.com * Internet: www.electrocube.com * (IR: 9/99) METALLIZED POLYPROPYLENE 935B SERIES (R) WRAP AND FILL OVAL CONFIGURATION For max. T, W and L dimensions, allow +.050". LEAD LENGTH: 2.0" .50" 100 VOLT DC/67 VAC DIMENSIONS MFD .0010 .0015 .0022 .0033 .0047 .0068 .0082 .010 .015 .022 .033 .047 .068 .082 .10 .15 .22 .33 .47 .68 .82 1.0 2.0 5.0 10.0 15.0 20.0 PART NO. T 935B1B102* 935B1B152* 935B1B222* 935B1B332* 935B1B472* 935B1B682* 935B1B822* 935B1B103* 935B1B153* 935B1B223* 935B1B333* 935B1B473* 935B1B683* 935B1B823* 935B1B104* 935B1B154* 935B1B224* 935B1B334* 935B1B474* 935B1B684* 935B1B824* 935B1B105* 935B1B205* 935B1B505* 935B1B106* 935B1B156* 935B1B206* .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .10 .12 .14 .18 .22 .22 .23 .29 .32 .21 .33 .44 .59 .75 .88 W .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .20 .21 .23 .27 .32 .32 .33 .38 .42 .38 .50 .60 .76 .91 1.05 200 VOLT DC/135 VAC LEAD SIZE (AWG) PART NO. .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .65 .78 .78 .78 1.15 1.15 1.65 1.90 1.90 1.90 26 26 26 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 22 22 22 20 20 20 20 935B1C102* 935B1C152* 935B1C222* 935B1C332* 935B1C472* 935B1C682* 935B1C822* 935B1C103* 935B1C153* 935B1C223* 935B1C333* 935B1C473* 935B1C683* 935B1C823* 935B1C104* 935B1C154* 935B1C224* 935B1C334* 935B1C474* 935B1C684* 935B1C824* 935B1C105* 935B1C205* 935B1C505* 935B1C106* 935B1C156* 935B1C206* DIMENSIONS .0010 .0015 .0022 .0033 .0047 .0068 .0082 .010 .015 .022 .033 .047 .068 .082 .10 .15 .22 .33 .47 .68 .82 1.0 2.0 5.0 10.0 15.0 20.0 PART NO. 935B1E102* 935B1E152* 935B1E222* 935B1E332* 935B1E472* 935B1E682* 935B1E822* 935B1E103* 935B1E153* 935B1E223* 935B1E333* 935B1E473* 935B1E683* 935B1E823* 935B1E104* 935B1E154* 935B1E224* 935B1E334* 935B1E474* 935B1E684* 935B1E824* 935B1E105* 935B1E205* 935B1E505* 935B1E106* 935B1E156* 935B1E206* T .09 .09 .09 .09 .09 .09 .09 .09 .09 .12 .16 .20 .25 .22 .24 .31 .34 .42 .32 .39 .45 .43 .57 .87 1.27 1.40 1.74 W .18 .18 .18 .18 .18 .18 .18 .18 .18 .21 .26 .30 .35 .31 .34 .40 .43 .52 .48 .57 .61 .60 .74 1.04 1.44 1.70 1.91 DIMENSIONS L 400 VOLT DC/270 VAC MFD Available in epoxy case configurations; please consult factory. T .09 .09 .09 .09 .09 .09 .09 .09 .09 .09 .12 .15 .18 .20 .23 .22 .23 .30 .32 .29 .32 .36 .47 .64 .94 1.20 1.37 LEAD SIZE W L (AWG) .18 .18 .18 .18 .18 .18 .18 .18 .18 .18 .21 .24 .28 .30 .32 .32 .33 .39 .41 .45 .49 .53 .64 .81 1.11 1.39 1.54 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .65 .78 .78 .90 1.15 1.15 1.15 1.40 1.90 1.90 1.90 1.90 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 24 22 22 22 20 20 20 20 20 20 600 VOLT DC/440 VAC LEAD SIZE DIMENSIONS LEAD SIZE L (AWG) PART NO. T W L (AWG) .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .65 .65 .65 .78 .78 1.15 1.15 1.15 1.40 1.65 1.90 1.90 2.15 2.15 26 26 26 26 26 26 26 26 24 24 24 24 24 24 22 22 20 20 20 20 20 20 20 20 20 20 20 935B1F102* 935B1F152* 935B1F222* 935B1F332* 935B1F472* 935B1F682* 935B1F822* 935B1F103* 935B1F153* 935B1F223* 935B1F333* 935B1F473* 935B1F683* 935B1F823* 935B1F104* 935B1F154* 935B1F224* 935B1F334* 935B1F474* 935B1F684* 935B1F824* 935B1F105* 935B1F205* 935B1F505* 935B1F106* 935B1F156* 935B1F206* .09 .09 .09 .14 .15 .13 .14 .15 .19 .15 .23 .28 .26 .28 .31 .38 .40 .49 .45 .52 .58 .63 .86 1.16 - .18 .18 .18 .23 .24 .22 .23 .24 .29 .24 .33 .38 .35 .38 .41 .48 .49 .59 .61 .64 .75 .79 1.03 1.33 - .40 .40 .40 .40 .40 .53 .53 .53 .53 .69 .69 .69 .95 .95 .95 .95 1.21 1.21 1.46 1.72 1.72 1.72 1.72 1.96 - 26 26 26 26 26 26 26 26 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 - *Add tolerance designator to complete part number: F = 1%, G = 2%, J = 5%, K = 10%, M = 20% (R) 3366 Pomona Blvd. * Pomona, CA 91768 * TEL: (909) 595-4037 * FAX: (909) 595-0186 e-mail: esales@electrocube.com * Internet: www.electrocube.com * (IR: 9/99) METALLIZED POLYPROPYLENE 935D SERIES (R) WRAP AND FILL ROUND CONFIGURATION LEAD LENGTH: 2.0" .50" For max. D and L dimensions, allow +.050". 100 VOLT DC/67 VAC 200 VOLT DC/135 VAC LEAD SIZE DIMENSIONS MFD .0010 .0015 .0022 .0033 .0047 .0068 .0082 .010 .015 .022 .033 .047 .068 .082 .10 .15 .22 .33 .47 .68 .82 1.0 2.0 5.0 10.0 15.0 20.0 PART NO. 935D1B102* 935D1B152* 935D1B222* 935D1B332* 935D1B472* 935D1B682* 935D1B822* 935D1B103* 935D1B153* 935D1B223* 935D1B333* 935D1B473* 935D1B683* 935D1B823* 935D1B104* 935D1B154* 935D1B224* 935D1B334* 935D1B474* 935D1B684* 935D1B824* 935D1B105* 935D1B205* 935D1B505* 935D1B106* 935D1B156* 935D1B206* D L .15 .15 .15 .15 .15 .15 .15 .15 .15 .15 .15 .15 .16 .18 .20 .24 .28 .28 .29 .35 .38 .31 .43 .55 .70 .86 .99 (AWG) PART NO. D 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 22 22 22 22 20 20 20 20 935D1C102* 935D1C152* 935D1C222* 935D1C332* 935D1C472* 935D1C682* 935D1C822* 935D1C103* 935D1C153* 935D1C223* 935D1C333* 935D1C473* 935D1C683* 935D1C823* 935D1C104* 935D1C154* 935D1C224* 935D1C334* 935D1C474* 935D1C684* 935D1C824* 935D1C105* 935D1C205* 935D1C505* 935D1C106* 935D1C156* 935D1C206* .15 .15 .15 .15 .15 .15 .15 .15 .15 .15 .18 .21 .24 .26 .29 .28 .29 .36 .38 .39 .43 .47 .57 .74 1.05 1.31 1.48 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .65 .78 .78 .78 1.15 1.15 1.65 1.90 1.90 1.90 400 VOLT DC/270 VAC DIMENSIONS MFD .0010 .0015 .0022 .0033 .0047 .0068 .0082 .010 .015 .022 .033 .047 .068 .082 .10 .15 .22 .33 .47 .68 .82 1.0 2.0 5.0 10.0 15.0 20.0 PART NO. D 935D1E102* 935D1E152* 935D1E222* 935D1E332* 935D1E472* 935D1E682* 935D1E822* 935D1E103* 935D1E153* 935D1E223* 935D1E333* 935D1E473* 935D1E683* 935D1E823* 935D1E104* 935D1E154* 935D1E224* 935D1E334* 935D1E474* 935D1E684* 935D1E824* 935D1E105* 935D1E205* 935D1E505* 935D1E106* 935D1E156* 935D1E206* .15 .15 .15 .15 .15 .15 .15 .15 .15 .18 .22 .26 .31 .28 .30 .37 .39 .48 .43 .49 .55 .54 .68 .98 1.38 - L .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .65 .65 .65 .78 .78 1.15 1.15 1.15 1.40 1.65 1.90 1.90 - DIMENSIONS L .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .65 .78 .78 .90 1.15 1.15 1.15 1.40 1.90 1.90 1.90 1.90 LEAD SIZE (AWG) 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 22 22 22 22 22 20 20 20 20 20 600 VOLT DC/440 VAC LEAD SIZE DIMENSIONS (AWG) PART NO. D 24 24 24 24 24 24 24 24 24 24 24 24 24 24 22 22 22 20 20 20 20 20 20 20 20 - 935D1F102* 935D1F152* 935D1F222* 935D1F332* 935D1F472* 935D1F682* 935D1F822* 935D1F103* 935D1F153* 935D1F223* 935D1F333* 935D1F473* 935D1F683* 935D1F823* 935D1F104* 935D1F154* 935D1F224* 935D1F334* 935D1F474* 935D1F684* 935D1F824* 935D1F105* 935D1F205* 935D1F505* 935D1F106* 935D1F156* 935D1F206* .15 .15 .15 .15 .15 .19 .20 .21 .23 .25 .29 .34 .32 .34 .37 .45 .46 .55 .65 .63 .69 .75 .96 1.24 - L .40 .40 .40 .40 .40 .53 .53 .53 .53 .69 .69 .69 .95 .95 .95 .95 1.21 1.21 1.21 1.71 1.71 1.71 1.96 2.71 - LEAD SIZE (AWG) 24 24 24 24 24 24 24 24 24 24 24 22 22 22 22 22 20 20 20 20 20 20 20 20 - *Add tolerance designator to complete part number: F = 1%, G = 2%, J = 5%, K = 10%, M = 20% (R) 3366 Pomona Blvd. * Pomona, CA 91768 * TEL: (909) 595-4037 * FAX: (909) 595-0186 e-mail: esales@electrocube.com * Internet: www.electrocube.com * (IR: 9/99)