VS-6ESH01HM3
www.vishay.com Vishay Semiconductors
Revision: 06-Jul-17 1Document Number: 95703
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Hyperfast Rectifier, 6 A FRED Pt®
FEATURES
• Hyperfast recovery time, reduced Qrr, and soft
recovery
• 175 °C maximum operating junction temperature
• Specified for output and snubber operation
• Low forward voltage drop
• Low leakage current
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• AEC-Q101 qualified, meets JESD 201 class 2 whisker test
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION / APPLICATIONS
State of the art hyperfast recovery rectifiers specifically
designed with optimized performance of forward voltage
drop and hyperfast recovery time.
The planar structure and the platinum doped life time control
guarantee the best overall performance, ruggedness, and
reliability characteristics.
These devices are intended for use in snubber, boost,
lighting, piezo-injection, as high frequency rectifiers and
freewheeling diodes.
The extremely optimized stored charge and low recovery
current minimize the switching losses and reduce power
dissipation in the switching element.
PRIMARY CHARACTERISTICS
IF(AV) 6 A
VR100 V
VF at IF0.74 V
trr (typ.) 28 ns
TJ max. 175 °C
Package SMPC (TO-277A)
Circuit configuration Single
Anode 1
Anode 2
Cathode
K
SMPC (TO-277A)
K
2
1
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Peak repetitive reverse voltage VRRM 100 V
Average rectified forward current IF(AV) TSp = 160 °C 6 A
Non-repetitive peak surge current IFSM TJ = 25 °C 150
Operating junction and storage temperatures TJ, TStg -55 to +175 °C
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Breakdown voltage,
blocking voltage
VBR,
VRIR = 100 μA 100 - -
V
Forward voltage VF
IF = 6 A - 0.87 0.94
IF = 6 A, TJ = 125 °C - 0.74 0.8
Reverse leakage current IR
VR = VR rated - - 2 μA
TJ = 125 °C, VR = VR rated - 2 15
Junction capacitance CTVR = 100 V - 43 - pF
VS-6ESH01HM3
www.vishay.com Vishay Semiconductors
Revision: 06-Jul-17 2Document Number: 95703
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Reverse recovery time trr
IF = 1 A, dIF/dt = 50 A/μs, VR = 30 V - 28 -
ns
IF = 0.5 A, IR = 1 A, Irr = 0.25 A - - 25
TJ = 25 °C
IF = 6 A
dIF/dt = 200 A/μs
VR = 160 V
-22-
TJ = 125 °C - 33 -
Peak recovery current IRRM
TJ = 25 °C - 2.4 - A
TJ = 125 °C - 5.0 -
Reverse recovery charge Qrr
TJ = 25 °C - 27 - nC
TJ = 125 °C - 80 -
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Maximum junction and
storage temperature range TJ, TStg -55 - 175 °C
Thermal resistance,
junction to solder pad RthJ-Sp -2.23
°C/W
Thermal resistance,
junction to ambient RthJA -85-
Approximate weight 0.1 g
0.0035 oz.
Marking device Case style SMPC (TO-277A) NEH1
0.1
1
10
100
0.2 0.4 0.6 0.8 1.0 1.2 1.4
IF- Instantaneous Forward Current (A)
VF- Forward Voltage Drop (V)
TJ= 150°C
TJ= 25 °C
TJ= 175 °C
TJ= 125°C
VR - Reverse Voltage (V)
I
R
- Reverse Current (μA)
0.001
0.01
0.1
1
10
100
0 255075100
25 °C
125 °C
150 °C
175 °C
VS-6ESH01HM3
www.vishay.com Vishay Semiconductors
Revision: 06-Jul-17 3Document Number: 95703
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 4 - Maximum Allowable Case Temperature
vs. Average Forward Current
Fig. 5 - Forward Power Loss Characteristics
Fig. 6 - Typical Reverse Recovery Time vs. dIF/dt
Fig. 7 - Typical Stored Charge vs. dIF/dt
Note
(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 5);
PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = rated VR
10
100
1000
0255075100
CT- Junction Capacitance (pF)
VR- Reverse Voltage (V)
155
160
165
170
175
180
01234567
Allowable Case Temperature (°C)
IF(AV) - Average Forward Current (A)
Square wave (D = 0.50)
80 % rated VRapplied
See note (1)
DC
0
1
2
3
4
5
6
7
0246810
Average Power Loss (W)
IF(AV) - Average Forward Current (A)
D = 0.02
D = 0.05
D = 0.1
D = 0.2
D = 0.5
DC
RMS limit
0
5
10
15
20
25
30
35
40
45
100 1000
trr (ns)
dIF/dt (A/μs)
25 °C
125 °C
IF= 6 A
0
20
40
60
80
100
120
140
100 1000
Q
rr
(nC)
dI
F
/dt (A/μs)
125 °C
25 °C
IF= 6 A
VS-6ESH01HM3
www.vishay.com Vishay Semiconductors
Revision: 06-Jul-17 4Document Number: 95703
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 8 - Transient Thermal Impedance, Junction to Case
Fig. 9 - Transient Thermal Impedance, Junction to Ambient
Fig. 10 - Reverse Recovery Waveform and Definitions
0.01
0.1
1
10
0.00001 0.0001 0.001 0.01 0.1 1 10 100
ZthJC - Thermal Impedance (°C/W)
t1- Rectangular Pulse Duration (s)
Single pulse
Typical, junction to case
Steady state value (DC)
0.01
0.1
1
10
100
0.00001 0.0001 0.001 0.01 0.1 1 10 100
ZthJA - Thermal Impedance (°C/W)
t1- Rectangular Pulse Duration (s)
Single pulse
Typical, junction to ambient
Steady state value (DC)
Q
rr
0.5 I
RRM
di
(rec)M
/dt
0.75 I
RRM
I
RRM
t
rr
t
b
t
a
I
F
di
F
/dt
0
(1)
(2)
(3)
(4)
(5)
(1) diF/dt - rate of change of current
through zero crossing
(2) IRRM - peak reverse recovery current
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(4) Qrr - area under curve dened by trr
and IRRM
trr x IRRM
2
Qrr =
(5) di(rec)M/dt - peak rate of change of
current during tb portion of trr
VS-6ESH01HM3
www.vishay.com Vishay Semiconductors
Revision: 06-Jul-17 5Document Number: 95703
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION TABLE
ORDERING INFORMATION (Example)
PREFERRED P/N QUANTITY PER REEL MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION
VS-6ESH01HM3/86A 1500 1500 7" diameter plastic tape and reel
VS-6ESH01HM3/87A 6500 6500 13" diameter plastic tape and reel
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95570
Part marking information www.vishay.com/doc?95565
Packaging information www.vishay.com/doc?88869
SPICE model www.vishay.com/doc?96111
2-Current rating (6 = 6 A)
3- Circuit configuration:
4- S = SMPC package
5- Process type,
H = hyperfast recovery
6- Voltage code (01 = 100 V)
- H = AEC-Q101 qualified
7
- M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free
8
Device code
51 32 4 6 87
VS- 6 E S H 01 M3H
1- Vishay Semiconductors product
E = single diode
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 03-Sep-14 1Document Number: 95570
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TO-277A (SMPC)
DIMENSIONS in inches (millimeters)
Conform to JEDEC® TO-277A
0.016 (0.40)
0.006 (0.15)
0.047 (1.20)
0.039 (1.00)
0.146 (3.70)
0.134 (3.40)
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
0.173 (4.40)
0.049 (1.24)
0.037 (0.94)
0.053 (1.35)
0.041 (1.05)
0.030 (0.75) NOM.
0.084 (2.13) NOM.
0.155 (3.94)
NOM.
Mounting Pad Layout
0.268
(6.80)
0.186 (4.72)
MIN.
0.050 (1.27)
MIN.
0.041
(1.04)
0.055 (1.40)
MIN.
0.189 (4.80)
MIN.
0.187 (4.75)
0.175 (4.45)
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
0.171 (4.35)
0.167 (4.25)
K
2
1
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
