PRODUCT DATASHEET Asia Pacific Region +85231026623 ENERGIZER NH22-175 Specifications Classification: Chemical System: Rechargeable Nickel-Metal Hydride (NiMH) Nominal Voltage: Rated Capacity: 8.4 Volts 175 mAh (to 5.5 volts) Based on 35 mA (0.2C) discharge rate Typical Weight: Typical Volume: Terminals: Jacket: 42.0 grams 22.0 cubic centimeters Snap Plastic Label Industry Standard Dimensions (millimeters) 17.50 15.50 9V 12.95 12.45 Internal Resistance: 26.50 24.50 The internal resistance of the cell varies with state of charge, as follows: Cell Charged Cell 1/2 Discharged 1000 milliohms 1500 milliohms (tolerance of 20% applies to above values) 46.40 Maximum 48.50 46.50 AC Impedance (No Load): The impedance of the charged cell varies with frequency, as follows: Frequency (Hz) Typical Discharge Characteristics 1000 Typical Performance at 21C Cell Voltage 8.0 Above values based on AC current set at 1.0 ampere. Value tolerances are 20%. 17.5 mA (0.1C) 7.5 7.0 Operating and Storage Temperatures: 6.5 35 mA (0.2C) 6.0 To maintain maximum performance, observe the following general guidelines regarding environmental conditions. 5.5 0 3 6 9 12 Hours of Discharge Typical Performance at 21C 8.0 Cell Voltage Impedance (milliohms) (Charged Cell) 950 0C to 40C 0C to 50C -20C to 30C 6520% Operating at extreme temperatures, will significantly impact battery cycle life. 7.5 87.5 mA (0.5C) 7.0 Charge: Discharge: Storage: Humidity: 6.5 350 mA (1.0C) 6.0 5.5 0.0 0.3 0.6 0.9 1.2 1.5 Hours of Discharge Important Notice This datasheet contains typical information specific to products manufactured at the time of its publication. (c)Energizer Holdings, Inc. - Contents herein do not constitute a warranty. Form No. EBC - 8919AP-A Page 1 of 1