2SK3720 Ordering number : ENN8173A N-Channel Silicon MOSFET 2SK3720 FM Tuner, VHF-Band Amplifier Applications Features * * * Low noise. High power gain. Small reverse transfer capacitance. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDS 15 Gate-to-Source Voltage VGS 5 V V Drain Current ID 30 mA Allowable Power Dissipation PD Tch 200 mW Channel Temperature 150 C Storage Temperature Tstg --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Drain-to-Source Voltage VDSX Gate-to-Source Leakage Current IGSS Zero-Gate Voltage Drain Current IDSS VGS(off) yfs Cutoff Voltage Forward Transfer Admittance Input Capacitance Ciss Reverse Transfer Capacitance Crss Power Gain PG Noise Figure NF Conditions VGS=--4V, ID=100A VDS=0V, VGS=5V VDS=10V, VGS=0V VDS=10V, ID=100A VDS=10V, VGS=0V, f=1kHz Ratings min typ max 15 V 6.0* 10 nA 12* mA --2.2 11 VDS=10V, VGS=0V, f=1MHz VDS=10V, VGS=0V, f=1MHz VDS=10V, VGS=0V, f=100MHz See specified Test Circuit. VDS=10V, VGS=0V, f=100MHz See specified Test Circuit. Unit 16 V mS 2.4 pF 0.035 pF 35 dB 2.0 dB Marking : KA * : The 2SK3720 is classified by IDSS as follows (unit : mA). Rank 5 6 IDSS 6 to 10 8 to 12 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62005AD MS IM / 31005AD TS IM TA-3941 No.8173-1/4 2SK3720 Package Dimensions unit : mm 7013-012 PG, NF Specified Test Circuit L2 to 20pF IN 0.16 0.5 0.4 3 to 30pF to 20pF L1 to 30pF OUT 1 2 0.95 0.95 0.5 1.5 2.5 0 to 0.1 1.9 2.9 L1 : 1.0mm copper wire 10mm 6T, tap : 2.5T from H side L2 : 1.0mm copper wire 10mm 7T, tap : 4T from H side 1 : Drain 2 : Gate 3 : Source 1.1 0.8 VD VG SANYO : CP ID -- VDS 24 0.2V 12 0V 8 --0.2V --0.4V 4 8 10 Drain-to-Source Voltage, VDS -- V yfs -- VGS VDS=10V 8m A S =10 mA 16 12 8 4 0 --1.5 --1.0 --0.5 0 0.5 1.0 Gate-to-Source Voltage, VGS -- V IT08945 ID S Forward Transfer Admittance, yfs -- mS 20 12 1.5 IT08946 yfs -- ID 3 Forward Transfer Admittance, yfs -- mS 6 8 0 --1.5 0 4 12 4 VGS= --0.8V 2 16 A 16 20 8m 0.4V 0m A 20 S =1 Drain Current, ID -- mA Drain Current, ID -- mA VDS=10V 1.0V 0.8V 24 0 ID -- VGS 28 ID S 28 VDS=10V 2 10 7 5 3 2 --1.0 --0.5 0 0.5 1.0 Gate-to-Source Voltage, VGS -- V 1.5 IT08947 5 7 1.0 2 3 5 7 Drain Current, ID -- mA 10 2 IT08679 No.8173-2/4 2SK3720 VGS(off) -- IDSS 3 Forward Transfer Admittance, yfs -- mS Cutoff Voltage, VGS(off) -- V 2 --1.0 7 5 3 2 --0.1 5 7 16 14 12 10 8 6 2 10 Drain Current, IDSS -- mA 0 Forward Transfer Admittance, yfs -- mS 5 Ciss 2 1.0 5 3 2 0.1 5 Crss 3 2 0 4 8 12 16 20 Drain-to-Source Voltage, VDS -- V 28 24 20 4 NF 2 12 IT08681 16 14 12 10 8 5 7 2 10 Drain Current, IDSS -- mA Allowable Power Dissipation, PD -- mW PG 32 10 18 IT08682 PD -- Ta 240 36 8 VDS=10V VGS=0V ITR00807 VDS=10V f=100MHz 6 yfs -- IDSS 3 24 PG, NF -- ID 40 4 Drain-to-Source Voltage, VDS -- V 20 f=1MHz VGS=0V 3 2 IT08680 Ciss, Crss -- VDS 10 Input Capacitance, Ciss -- pF Reverse transfer Capacitance, Crss -- pF VGS=0V 0 3 Voltage Gain, PG -- dB Noise Figure, NF -- dB yfs -- VDS 18 VDS=10V 200 160 120 80 40 0 0 3 5 7 1.0 2 3 5 Drain Current, ID -- mA 7 10 2 IT08683 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT08977 No.8173-3/4 2SK3720 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2005. Specifications and information herein are subject to change without notice. PS No.8173-4/4