XW1147B PLCC-4 Type White LED Features Package PLCC-4 Type, Diffused pale yellow resin Product features Outer Dimension 3.5 x 2.8 x 1.9mm( L x W x H ) Temperature range Storage Temperature : -40 100 Operating Temperature : -30 85 Spatial distribution characteristics. ( : 120deg) No lead package and lead-free soldering compatible RoHS compliant Chromaticity coordinates x = 0.31TYP., y = 0.32TYP. (Condition : IF=20mA) Spatial distribution 120 deg. Die materials InGaN Optical efficiency 19 lm/W Rank grouping parameter Sorted by luminous intensity and chromaticity per rank taping Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Reflow soldering, TTW (Through The Wave) soldering and manual soldering Taping and reel 2,000pcs per reel in a 8mm width tape. (Standard) Reel diameter: 180mm ESD 1kV (HBM) Recommended Applications Cellular Phone, Mobile Equipment, Amusement Equipment, Other General Applications 2005.3.31 Page 1 XW1147B PLCC-4 Type White LED Color and Luminous Intensity Part No. XW1147B Material InGaN Emitted Color Lens Color White Pale Yellow Luminous Intensity Luminous Flux (lm) Iv (mcd) MIN. TYP. IF TYP. IF 400 500 20 1.4 20 Note : The above luminous intensity(Iv) is the setup values of the sorting machine. (Tolerance : IV... 10%) 2004.07.1 Page 2 XW1147B PLCC-4 Type White LED Absolute Maximum Ratings Item Symbol Absolute Maximum Ratings Unit Power Dissipation Pd 120 mW Forward Current IF 30 mA Pulse Forward Current 1 IFRM 100 mA Derating (Ta=67.5 or higher) 0.50 mA/ 1.67 mA/ V Reverse Voltage VR 5 Operating Temperature T opr -30 +85 Storage Temperature Tstg -40 +100 1 IFRMMeasurement condition : Pulse Width 2005.8.18 1ms., Duty 1/20. Page 3 XW1147B PLCC-4 Type White LED Electro-Optical Characteristics Item Forward Voltage Condition IF=20mA Reverse Current VR =5V Half Intensity Angle IF=20mA Chromaticity Coordinates IF=20mA 2004.07.1 Symbol Characteristics Unit TYP. 3.7 MAX. 4 MAX. 50 TYP. 120 deg. x TYP. 0.31 - y TYP. 0.32 - VF IR V Page 4 XW1147B PLCC-4 Type White LED Luminous Intensity Rank Intensity Tolerance each Rank : +/-10% Rank C D E I V mc d Condition MIN. MAX. 400 475 475 565 IF=20mA 565 672 Please contact our sales staff concerning rank designation. 2004.07.1 Page 5 XW1147B PLCC-4 Type White LED Sorting Chart for Chromaticity Coordinates Chromaticity Coordinates Tolerance Each Rank : +/-0.02 LEFT DOWN point LEFT UP point RIGHT UP point RIGHT UP point Rank x y x y x y x y 1 0.280 0.248 0.264 0.267 0.283 0.305 0.296 0.276 2c 0.287 0.295 0.283 0.305 0.304 0.330 0.307 0.315 2d 0.296 0.276 0.287 0.295 0.307 0.315 0.311 0.294 2e 0.307 0.315 0.304 0.330 0.330 0.360 0.330 0.339 2f 0.311 0.294 0.307 0.315 0.330 0.339 0.330 0.318 3 0.330 0.318 0.330 0.360 0.361 0.385 0.356 0.351 Please contact our sales staff concerning rank designation. 2004.07.1 Page 6 XW1147B PLCC-4 Type White LED Technical Data Relative Intensity vs. Wave Length Spatial Distribution Example Relative Intensity vs.=Wavelength Condition:IF 20mA T a=25 /Condition : IF=10mA 1.2 Ta=25 Condition: Ta=25 VUB / Relative Intensity Relative Intensity 1.2 VUG 1.0 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.00 400 350 400 450 450 500 500 550 600 550 650 700 600 750 / Wavelength[nm] Wave Length[nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Condition:Ta=25 Condition:Ta=25 1.5 / Relative Intensity 10 Relative Intensity Fo rward C u rre n t IF (m A) 100 1 1.0 0.5 0.1 0.0 0.01 2.0 2.5 3.0 3.5 Forward Voltage VF(V) 2004.07.1 4.0 4.5 0 5 10 15 20 25 30 Forward Current IF(mA) Page 7 XW1147B PLCC-4 Type White LED Technical Data Ambient Temperature vs Relaitive Intensity Ambient Temperature vs. Maximum Forward Current Repeatition Frequency : f Condition:IF=20mA 10.0 Duty=5% 100 80 Duty=10% 60 Duty=20% Re lative In te n sity Maximum Forward Current : IF MAX. (mA) 120 50Hz Duty=50% 1.0 40 DC 20 0.1 0 -30 -40 -10 10 30 50 70 90 110 -20 0 20 40 60 80 100 Ambient Temperature Ta( ) Ambient Temperature : Ta( ) Ambient Temperature vs Forward Voltage Forward Current vs. Chromaticity Condition:IF=20mA Condition:Ta=25 0.34 4.4 5mA 0.33 4 10mA 3.8 15mA 20mA Fo rward Vo ltage V F(V) 4.2 0.32 3.6 25mA 30mA 3.4 0.31 3.2 3 -40 -20 0 20 40 60 Ambient Temperature Ta( ) 2004.07.1 80 100 0.30 0.300 0.305 0.310 0.315 0.320 Page 8 XW1147B PLCC-4 Type White LED Technical Data Ambient Temperature vs Chromaticity Condition:IF=20mA 0.35 0.34 -30 0.33 0 0.32 25 0.31 85 0.30 0.29 50 0.30 0.31 0.32 0.33 0.34 2004.07.1 Page 9 XW1147B PLCC-4 Type White LED Package Dimensions Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) (Unit: mm) Quantity: 2,000pcs/ reel (standard) 2004.07.1 Page 10 XW1147B PLCC-4 Type White LED Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to room temperature after the first reflow) in order to prevent the LED resin from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6 maximum) TTW (Through The Wave) soldering Conditions Pre-heating 120 60 s (MAX.) (MAX.) Solder Bath Temp. 265 (MAX.) Dipping Time 5 s (MAX.) 1) The dip soldering process shall be 2 times maximum. 2) The product shall be cooled to room temp. before the second dipping process. Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2004.07.1 350 3 s 1 time (MAX.) (MAX.) (MAX.) Page11 XW1147B PLCC-4 Type White LED Reliability Testing Result Reliability Testing Result Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. Storage Life Applicable Standard Testing Conditions High Temp. Storage Life Low Temp. Storage Life Cycled Temp. Humidity Life EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(102) EIAJ ED4701/100(103) EIAJ ED4701/100(105) EIAJ ED4701/200(201) EIAJ ED4701/200(202) EIAJ ED4701/200(203) Resistance to Reflow Soldering EIAJ ED4701/300(301) Preheat : 150 180 (120s Max.) Soldering Temp. : 260 (5s) Moisture Soak : 30 , 70%, 72h Electric Static EIAJ ED4701/300(304) EIAJ ED4701/400(403) Thermal Shock 1 Discharge (ESD) Vibration, Variable Frequency Duration Failure Ta = 25 , IF = 30mA 1,000 h 0/20 Ta = 85 ,IF = 20mA 1,000 h 0/20 Ta = -30 , IF = 30mA 1,000 h 0/20 Ta = 60 , 90%, IF = 30mA 1,000 h 0/20 Ta = 60 , 90% 1,000 h 0/20 200 cycles 0/20 Ta = 100 1,000 h 0/20 Ta = -40 1,000 h 0/20 10 cycles 0/20 2 times 0/20 once each polarity 0/20 2h 0/20 Ta = -40 100 Ta = -10 (each 15min.) 60 , 95%, 24h/cycle C = 100pF, R2 = 1.5K , 2,000V 2 98.1m/s (10G), 100 XYZ each direction 2KHz, 20min. 1 Reference test Failure Criteria Items Symbols Conditions Failure criteria Luminous Intensity Iv IF=20mA Testing Min. Value Spec. Min. Value x 0.5 Forward Voltage VF IF=20mA Testing Max. Value Spec. Max. Value x 1.2 Reverse Current IR VR=5V Testing Max. Value Spec. Max. Value x 2.5 Cosmetic Appearance - - 2005.8.18 No notable, decoloration, deformation and cracking Page12 XW1147B PLCC-4 Type White LED Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products described in the data sheets are made to be used in standard electronic applications such as office automation appliances, communication devices, audio visual, home appliances, and measuring instruments. 5) If the products in the data sheets are to be used for purposes other than the above which requires high level reliability and safety where failure and or malfunction of the product may cause death or other serious effects on the human body such as airplane, space activity, transportation, medical, nuclear), please contact our sales personnel. 6) In order to export the products or technologies described in this data sheet which are under the "Foreign Exchange and Foreign Trade Control Law," it is necessary to first obtain an export permit from the Japanese government. 7) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 8) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2004.07.13 Page13