DBL(S)- Series
Page <1> 07/07/08 V1.1
DBL
Dimensions : Inches (Millimetres)
Features:
•Glass passivated junction.
•Ideal for printed circuit board.
•Reliable low cost construction utilizing moulded plastic technique.
•High temperature soldering guaranteed: 260°C/10 seconds/0.375 inch
(9.5mm) lead length at 5 lbs., (2.3kg) tension.
•Small size, simple installation.
pure tin plated terminal, lead free. leads solderable per MIL-STD-202,
Method 208.
•High surge current capability.
DBLS
DBL(S)- Series
Page <2> 07/07/08 V1.1
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Type Number Symbol
DBL
101G
DBL
102G
DBL
103G
DBL
104G
DBL
105G
DBL
106G
DBL
107G
Units
DBLS
101G
DBLS
102G
DBLS
103G
DBLS
104G
DBLS
105G
DBLS
106G
DBLS
107G
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000
VMaximum RMS Voltage VRMS 35 70 140 280 420 560 700
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000
Maximum Average Forward Rectified Current
at TA= 40°C I (AV) 1.0
A
Peak Forward Surge Current, 8.3ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
IFSM 50
Maximum Instantaneous Forward Voltage
at 1.0A VF1.1 V
Maximum DC Reverse Current at TA= 25°C
at Rated DC Blocking Voltage at TA= 125°C IR10
500
µA
µA
Typical Junction Capacitance Cj25 pF
Typical Thermal Resistance (Note 1) RθJA
RθJL
40
15 °C/W
Operating Temperature Range TJ
-55 to +150 °C
Storage Temperature Range TSTG
Notes : 1. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted
on PCB with 0.2 x 0.2 inches (5 x 5mm) Copper Pads.
2. DBLS for Surface Mount Package.
DBL(S)- Series
Page <3> 07/07/08 V1.1
Ratings and Characteristic Curves (DBL 101G thru DBL 107G)
Maximum Derating Curve for Output
Rectified Current
Average Forward Current (A)
Ambient Temperature (°C)
Typical Reverse Characteristics
Per Bridge Element
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
Maximum Non-repetitive Peak Forward
Surge Current
Peak Forward Surge Current (A)
Number of Cycles at 60Hz
Typical Junction Capacitance Per
Bridge Element
Capacitance (pF)
Reverse Voltage (V)
DBL(S)- Series
Page <4> 07/06/08 V1.1
Part Number Table
Description Part Number
Bridge Rectifier, 1A, 100V DBL102G
Bridge Rectifier, 1A, 200V DBL103G
Bridge Rectifier, 1A, 400V DBL104G
Bridge Rectifier, 1A, 600V DBL105G
Bridge Rectifier, 1A, 800V DBL106G
Bridge Rectifier, 1A, 1000V DBL107G
Bridge Rectifier, 1A, 50V DBLS101G
Bridge Rectifier, 1A, 100V DBLS102G
Bridge Rectifier, 1A, 200V DBLS103G
Bridge Rectifier, 1A, 400V DBLS104G
Bridge Rectifier, 1A, 600V DBLS105G
Bridge Rectifier, 1A, 800V DBLS106G
Bridge Rectifier, 1A, 1000V DBLS107G
Typical Forward Characteristics
Per Bridge Element
Instantaneous Forward Current (A)
Forward Voltage (V)
For enquiries from all other markets
DBL(S)- Series
Page <5> 07/07/08 V1.1
Notes:
International Sales Offices:
AUSTRALIA – Farnell
Tel No: ++61 1300 361 005
Fax No: ++61 1300 361 225
FRANCE – Farnell
Tel No: ++ 33 474 68 99 99
Fax No: ++ 33 474 68 99 90
NORWAY – Farnell
Tel No: 800 146 70
Fax No: 800 146 76
AUSTRIA – Farnell
Tel No: ++ 43 662 2180 680
Fax No: ++ 43 662 2180 670
GERMANY – Farnell
Tel No: ++ 49 89 61 39 39 39
Fax No: ++ 49 89 613 59 01
PORTUGAL – Farnell
Tel No: ++ 34 93 475 8804
Fax No: ++ 34 93 474 5288
RUSSIA – Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ESTONIA – Farnell
Tel No: ++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
NETHERLANDS
– Farnell
Tel No: ++ 31 30 241 7373
Fax No: ++ 31 30 241 7333
UK – Farnell
Tel No: ++ 44 8701 200 200
Fax No: ++ 44 8701 200 201
SINGAPORE
–
Farnell-Newark
Tel No: ++ 65 6788 0200
Fax No: ++ 65 6788 0300
HONG KONG
–
Farnell-Newark
Tel No: ++ 852 2268 9888
Fax No: ++ 852 2268 9899
HUNGARY
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
BELGIUM – Farnell
Tel No: ++ 32 3 475 2810
Fax No: ++ 32 3 227 3648
BRAZIL – Farnell-Newark
Tel No: ++ 55 11 4066 9400
Fax No: ++ 55 11 4066 9410
IRELAND – Farnell
Tel No: ++ 353 1 830 9277
Fax No: ++ 353 1 830 9016
INDIA
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ISRAEL – Farnell
Tel No: ++ 180 937 0015
Fax No: ++ 180 937 0014
SPAIN – Farnell
Tel No: 901 20 20 80
Fax No: 901 20 20 90
CHINA – Farnell-Newark
Tel No: ++86 10 6238 5152
Fax No: ++86 10 6238 5022
CZECH REPUBLIC
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ITALY – Farnell
Tel No: ++ 39 02 93 995 200
Fax No: ++ 39 02 93 995 300
SWEDEN – Farnell
Tel No: ++ 46 8 730 50 00
Fax No: ++ 46 8 83 52 62
MALAYSIA –
Farnell-Newark
Tel No: ++ 60 3 7873 8000
Fax No: ++ 60 3 7873 7000
SWITZERLAND
– Farnell
Tel No: ++ 44 204 64 64
Fax No: ++ 44 204 64 54
DENMARK – Farnell
Tel No: ++ 45 44 53 66 44
Fax No: ++ 45 44 53 66 06
UK –CPC
++ 44 8701 202 530
++ 44 8701 202 531
USA –
Newark
Tel No: 800 463 9275
NEW ZEALAND
– Farnell
Tel No: 0800 90 80 80
Fax No: 0800 90 80 81
EXPORT – Farnell
Tel No: ++ 44 8701 200 208
Fax No: ++ 44 8701 200 209
export
FINLAND – Farnell
Tel No: ++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
