LUCKY LIGHT LL-S150WC DATA SHEET QC: Part No. ENG: LL-S150WC Spec No. Prepared By: S/N-02011105D Page 1 of 4 LUCKY LIGHT Features High intensity 3.2*1.1*1.6mm(1206,SMD) package Wide viewing angle General purpose leads Reliable and rugged Package Dimension: Part NO. Chip Material Lens Color Source Color LL-S150WC GaInN Water Clear White Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.10(.004") unless otherwise specified. 3. Specifications are subject to change without notice 4. Caution in ESD: Siatic Electricity and surge damages the LED. lt is recommend to use a wrist band or anti-electrostatic glove when handling the LED.All devices, equipment and machinery must be properly grounded. Part No. LL-S150WC Spec No. S/N-02011105D Page 2 of 4 LUCKY LIGHT Absolute Maximum Ratings at Ta=25 Parameter MAX. Unit Power Dissipation 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA Continuous Forward Current 35 mA Derating Linear From 50 0.4 mA/ 5 V Reverse Voltage Operating Temperature Range -40 to +80 Storage Temperature Range -40 to +80 Lead Soldering Temperature [4mm(.157") From Body] 260 for 5 Seconds Electrical Optical Characteristics at Ta=25 Parameter Luminous Intensity Viewing Angle Symbol Min. Typ. Max. Unit Test Condition Iv --- 400 --- mcd If=20mA (Note 1) 21/2 --- 140 --- Deg Note 2 x= X Re d = X + Y + Z Re d + Green + Blue x 0.20 0.27 0.34 --- IF=20mA (Note 3) y= Green Y = X + Y + Z Re d + Green + Blue y 0.20 0.27 0.35 --- IF=20mA (Note 3) Forward Voltage VF 2.8 3.6 4.0 V IF=20mA Reverse Current IR --- --- 100 A VR=5V Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. It use many parameters that correspond to the CIE 1931 2. X,Y, and Z are CIE 1931 2values of Red, Green and Blue content of the measurement. Part No. LL-S150WC Spec No. S/N-02011105D Page 3 of 4 LUCKY LIGHT Typical Electrical / Optical Characteristics Curves (25 Ambient Temperature Unless Otherwise Noted) CIE 1931 Chromaticity Diagram Forward Current vs Forward Voltage Forward Current IF(mA) 35 30 25 20 15 10 5 0 2.5 2.75 3 3.25 3.5 3.75 Forward Voltage VF(V) Relative Luminous Intensity vs Forward Current Relative Intensity (LOP@20mA=1) 3 2.5 2 1.5 1 0.5 0 0 5 10 15 20 25 30 35 Forward Current IF(mA) Part No. LL-S150WC Spec No. S/N-02011105D Page 4 of 4