Key Features
Performs complete BORSCHT functions for a single channel with
a single device
Internal balanced ringing up to 90 VPK (5 REN up to 4 kft)
Integrated Power Management
Integrated DC-to-DC controller regulates battery voltage to
minimize power dissipation in all operating modes
Programmable linefeed characteristics
Ringing frequency, amplitude, cadence
Trapezoidal and Sinusoidal waveforms
Two-wire AC impedance, transhybrid balance
Constant Current feed (20 to 41 mA)
Ring trip and loop closure threshold
Programmable signal generation
DTMF generation and detection
Metering pulse generation (12/16 kHz)
Enhanced Caller ID (FSK) generation (Type I and Type II)
Tone generation (up to four simultaneous)
G.711 µ-Law/A-Law / 16-bit linear PCM audio
Programmable audio path gains
Loop test and diagnostics support
Integrated loopback modes
Real-time linefeed monitoring
On-chip temperature sensor
PCM and SPI bus digital interfaces
PCM Master and Slave modes supported
On-chip PLL for flexible clocking options including 1
2.000 MHz BCLK operation
3.3V operation
Small Footprint Packages:LQFP-48, QFN-48
Benefits Applications
High integration reduces overall system BOM and footprint
Low power consumption for battery-backup and other
power sensitive applications
High programmability reduces real-time software overhead
Extensive line sensing enables diagnostics support
Analog Telephone Adapter
Voice enabled DSL Modems
Voice enabled Cable Modems
Residential VoIP Gateways / Routers
Integrated Access Devices
Fiber to the Premise/Home (FTTP/H)
Optical Network Terminals (ONT)
Set Top Boxes
Wireless Local Loop, PBX, ISDN NT1/TA
Page 2 of 3Nuvoton - Pro-X Single Programmable Extended CODEC/SLCC
10/23/2008http://www.nuvoton-usa.com/en/content/view/327/554/