Updated September 23, 2014. ©2014 ADLINK Technology, Inc. All Rights Reserved. All specications are subject to change without further notice.
CompactPCI
Timer/Counter
10-CH General Purpose Timer/Counter & 8-CH DIO Cards
PCI/cPCI-8554
Features
■ Supports a 32-Bit 5 V PCI bus (PCI-8554)
■ 3U Eurocard form factor, CompactPCI compliant
(PICMG 2.0 R3.0) (cPCI-8554)
■ Onboard four 8254 programmable timer/counter chips
■ 10-CH independent 16-Bit down counters
■ 1-CH 32-Bit cascaded timer
■ Onboard 8 MHz clock source
■ Four programmable clock sources for each timer/counter
■ Programmable de-bounce filters for external clock &
external interrupt inputs
■ Programmable interrupt sources
■ 8-CH TTL digital inputs & 8-CH TTL digital outputs
■ +12 V and +5 V power available on the connector
■ Onboard resettable fuses for power output protection
■Supported Operating System
•Windows 7/8 x64/x86, Linux
■Driver and SDK
•LabVIEW, MATLAB, C/C++, Visual Basic,
Visual Studio.NET
■Software Utility
•AD-Logger
Programmable De-bounce Filters for External Clocks
■
Number of channels: 11
■
Filtered inputs: external clock, external interrupt
■
Glitch rejection pulse width: 4 periods of the
debounce clock
■
De-bounce clock: up to 2 MHz, programmable
Interrupt
■
Number of interrupt sources: 2
■
Sources: external interrupt input and output of
counter #12
Digital I/O
■
Number of channels: 8 inputs and 8 outputs
■
Compatibility: 5 V/TTL
■
Data transfers: programmed I/O
General Specifications
■
I/O connector: One 100-pin SCSI-II female
■
Operating temperature: 0˚C to 60˚C (32
˚F
to 140
˚F
)
■
Storage temperature: -20˚C to 80˚C (-4
˚F
to 176
˚F
)
■
Relative humidity: 5% to 95%, non-condensing
■
Power requirements
■
Dimensions (not including connectors)
134 mm x 107 mm (5.22” x 4.17”) (PCI-8554)
160 mm x 100 mm (6.24” x 3.9”) (cPCI-8554/8554R)
Device
PCI-8554/cPCI-8554
+5 V
350 mA typical
Terminal Boards & Cables
■DIN-100S-01
Terminal Board with One 100-pin SCSI-II Connector and
DIN-Rail Mounting (Cables are not included. For more
information about mating cables, please refer to P3-48/49.)
Note:
Legacy DIN-502S can be replaced by two DIN-50S-01
and ACL-10252-1 (100-Pin to two 50-Pin Cable, 1 M)
Ordering Information
■ PCI-8554
10-CH General Purpose Timer/Counter & 8-CH
DIO Card
■ cPCI-8554
12-CH 16-Bit Timer/Counter & Digital I/O Card
Specifications
General-Purpose Timer/Counters
■
Number of channels: 10
■
Counter width: 16 Bit
■
Compatibility: 5 V/TTL
■
Base clock available: 8 MHz or external clock up to 10 MHz
■
Programmable clock sources
•cascaded 32-Bit timer output
•external clock
•timer/counter output of the last channel
•Onboard 8 MHz clock
Cascaded Timer
■
Number of channels: 1
■
Counter width: 32 Bit
■
Compatibility: 5 V/TTL
■
Base clock available: 8 MHz, fixed
PCI-8554
cPCI-8554
3-47 www.adlinktech.com
