!Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors Cat.No.T13E-14 T13E.pdf Aug.10,2012 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant s s s All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). T13E.pdf Aug.10,2012 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 CONTENTS 1 Part Numbering 2 Selection Guide of Ceramic Trimmer Capacitors 3 1 TZR1 Series 4 2 TZS2 Series 8 3 TZY2 Series 12 4 TZV2 Series 16 5 TZC3 Series 20 6 TZW4 Series 24 7 TZB4 Series 27 8 TZ03 Series 32 2 3 4 5 Packaging 37 Recommended Adjustment Tools 39 Qualified Standards 41 6 7 8 Bluetoothr is a registered trademark or trademark of Bluetooth SIG, Inc. in the United States and other countries. T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 o Part Numbering Ceramic Trimmer Capacitors (Part Number) TZ Y2 R 200 A 001 R00 q w e r t y u tTerminal Shape qProduct ID Code Product ID TZ Trimmer Capacitors wSeries/Terminal Code Series/Terminal TZC3, TZW4, TZB4 (SMD Type) B Top Adjustment: TZB4 (SMD Type) E Rear Adjustment: TZB4 (SMD Type) 03 6mm Size Lead Type F Top Adjustment: TZ03 (Lead Type) B4 4mm Size SMD Type N Rear Adjustment: TZ03 (Lead Type) W4 4mm Size SMD Type Please refer to dimensions for terminal details. C3 3mm Size SMD Type S2 2mm Size SMD Type (Height 1.0mm) Y2 2mm Size SMD Type (Height 1.25mm) Code Individual Specifications V2 2mm Size SMD Type (Height 1.45mm) 001 TZR1, TZS2, TZY2, TZW4 Standard Type R1 1mm Size SMD Type (Height 0.90mm) 110 TZV2, TZC3 Standard Type eTemperature Characteristics Code Temperature Characteristics Z NP0ppm/C yIndividual Specifications 169 TZ03 Standard Type A10 TZB4 No-cover Film Standard Type B10 TZB4 with Cover Film Standard Type uPackaging R N750ppm/C K N1000ppm/C Code P N1200ppm/C B00 Bulk R00 Reel (Taping o180mm) R01* Reel (Taping o330mm) Please refer to ratings for tolerance of temperature characteristics. rMaximum Capacitance Expressed by three-digit alphanumerics. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. 2 A Terminal Shape Top Adjustment: TZR1, TZS2, TZY2, TZV2, * TZB4 only. Packaging T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Selection Guide of Ceramic Trimmer Capacitors Mounting Method? Surface Mount Reflow Height 0.90mm max. Height 1.7mm max. TZR1 TZC3 1.5(W) x 1.7(L) 3.2(W) x 4.5(L) Height 1.00mm max. PCB Insertion Flow Manual Insertion Height 3.2mm max. Height 5.3mm max. TZB4_A 4.0(W) x 4.5(L) (with cover film) 6.0(W) x 6.0(L) Height 3.2mm max. TZB4_B TZS2 TZB4_A 2.2(W) x 2.7(L) 4.0(W) x 4.5(L) 4.0(W) x 4.5(L) (with cover film) TZ03_N 6.0(W) x 6.0(L) TZB4_E Height 1.25mm max. TZB4_B TZY2 TZ03_F 4.0(W) x 4.5(L) (with cover film) 4.0(W) x 4.5(L) 2.5(W) x 3.2(L) Height 1.45mm max. TZB4_E 4.0(W) x 4.5(L) TZV2 2.3(W) x 3.2(L) High Frequency Power Height 2.6mm max. TZW4 4.2(W) x 5.2(L) All Ceramic Trimmer Capacitor products comply with RoHS and ELV. 3 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Ceramic Trimmer Capacitors 1 TZR1 Series c Features 1.7 1. Ultra-small and thin with external dimensions of 1.5(W)x1.7(L)x0.85(H)mm (80% less in volume than the current product). 2. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after reflow soldering. 3. Suitable for high frequency circuit due to high self-resonant frequency (6.2GHz of TZR1Z010 at 1.0pF setting). 0.9 max. 1.5 (Depth;0.15) 0.45 0.2 0.35 ( Tolerance:in 0.1 mm ) c Applications 1. Bluetoothr 2. Crystal oscillators 3. Crystal filters 4. Hand radios 5. Miniature tuner packs (FM Radio, TV) 6. Remote keyless entry systems 7. Pagers Part Number C min. (max.) (pF) C max. (pF) TC Rated Voltage Withstanding Voltage TZR1Z010A001 0.55 1.0 +100/-0% NP0300ppm/C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZR1Z1R5A001 0.7 1.5 +100/-0% NP0300ppm/C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZR1Z040A001 1.5 4.0 +100/-0% NP0500ppm/C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZR1R080A001 3.0 8.0 +100/-0% N750500ppm/C 300min. at 1MHz, Cmax. 25Vdc 55Vdc Insulation Resistance: 10000M ohm Torque: 0.1 to 1.0mNm Operating Temperature Range: -25 to +85C c Construction Cover Metal Rotor Monolithic Stator 4 Q T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Temperature Characteristics TZR1Z010 +8 +6 +4 +2 65 0 0 -10 Z1R5 (NP0300 ppm/C) Cap. Change (%) Cap. Change (%) Z010 (NP0300 ppm/C) -25 85 0 -10 45 -4 +8 +6 +4 +2 -2 45 -4 Temp. (C) -6 -6 -8 -8 -10 -10 -12 -12 Temp. (C) TZR1R080 R080 (N750500 ppm/C) Cap.Change (%) Cap.Change (%) Z040 (NP0500 ppm/C) +8 +6 +4 +2 -10 0 -2 +6 +4 20 Temp.(C) +2 20 -25 -10 45 85 65 0 -2 0 45 -4 +8 85 65 0 85 20 TZR1Z040 -25 65 0 -25 20 -2 1 TZR1Z1R5 -4 Temp.(C) -6 -6 -8 -8 -10 -10 -12 -12 c Frequency Characteristics TZR1Z010 TZR1Z1R5 Z010 10000 10000 1000 1000 100 Z1R5 100 0.55pF set 0.7pF set Q Q 10 10 1.0pF set 1.5pF set 1 2 4 6 Frequency (GHz) 8 2 4 6 Frequency (GHz) TZR1R080 Z040 R080 1000 100 1000 100 Q 10 10 500 0 TZR1Z040 1000 1 0 10 1000 1500 2000 Frequency (MHz) 2500 8 10 1000 100 100 10 10 Q 1 500 1000 1500 Frequency (MHz) Capacitance (pF) 0 Capacitance (pF) 0 1 2000 5 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. c Land Pattern 2.2 0.5 1.2 Tolerance: 0.1 in mm c Temperature Profile Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) T5 T4 T3 T2 Temperature (C) Temperature (C) 1 T1 t2 Limit Profile t3 Standard Profile t1 T3 T2 t1 time (s) Standard Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. t2 T1 Heating Temp. (T2) Time (t2) 220C 30 to 60sec. Standard Profile time (s) Standard Profile Peak Cycle temperature of reflow (T3) 2453C 2 times Temp. (T1) Time (t1) Temp. (T2) Time (t2) Peak temperature (T3) 150C 60 to 120sec. 183C 30sec. 230 +5/-0C Pre-heating Heating Cycle of reflow 1 time Limit Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. Heating Temp. (T4) 230C Time (t3) Peak Cycle temperature of reflow (T5) 30 to 50sec. 260 +5/-0C 2 times Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output Cycle of soldering iron 35010C 3sec. max. 30W max. 1 time c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. T13E.pdf Aug.10,2012 c Notice (Soldering and Mounting) 1. Soldering (1) TZR1 series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 100 micro m to 150 micro m and the dimension of land pattern should be Murata's standard land pattern used at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to flux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply flux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed metal rotor or contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. 1 (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breaking. (3) Use a pick-up nozzle of a suitable dimension. (1.1-1.2mm external diameter and 0.8-0.9mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) c Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. *Recommended screwdriver for manual adjustment MURATA: KMDR160 2. When adjusting with a screwdriver, do not apply excessive force (preferably 0.5 N [Ref: 50gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 7 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Ceramic Trimmer Capacitors TZS2 Series c Features 2.7 2.2 1.0 0.6 0.20 Depth 1. Ultra-small and thin type with external dimensions of 2.2(W)x2.7(L)x0.95(H)mm (30% less in volume than the current product). 2. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after reflow soldering. 3. Pierced square hole allows for high resistance to tuning force and in-process automatic adjustment. 1.0max. 2 0.4 Tolerance: 0.1 in mm c Applications 1. Crystal oscillators 2. Crystal filters 3. Hand radios 4. Cordless telephones 5. Cellular telephones 6. Tuner packs 7. Pagers 8. Remote keyless entry systems 9. PHS 10. Radar detectors 11. W-LAN 12. Compact radios 13. Headphone stereos C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZS2Z060A001 3.0 6.0 +100/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZS2Z100A001 3.5 10.0 +100/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZS2R200A001 7.0 20.0 +100/-0% N750500ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc Part Number Insulation Resistance: 10000M ohm Torque: 0.5 to 5.0mNm Operating Temperature Range: -25 to +85C c Construction Cover Metal Rotor Monolithic Stator 8 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Temperature Characteristics TZS2Z060 TZS2Z100 Z100 (NP0300 ppm/C) Cap.Change (%) Cap.Change (%) Z060 (NP0300 ppm/C) +8 +6 +4 +2 65 0 -25 -10 +4 45 -10 0 65 20 -2 2 Temp.(C) 0 -25 -4 +6 +2 85 20 -2 0 +8 85 45 -4 Temp.(C) -6 -6 -8 -8 -10 -10 -12 -12 TZS2R200 Cap.Change (%) R200 (N750500 ppm/C) +8 +6 +4 +2 20 -25 -10 0 Temp.(C) 45 65 85 0 -2 -4 -6 -8 -10 -12 c Frequency Characteristics TZS2Z060 TZS2Z100 Z100 1000 100 100 Q 10 1 10 1000 1000 100 100 10 10 Q Capacitance (pF) 1000 Capacitance (pF) Z060 1 500 1000 1500 Frequency (MHz) 2000 200 400 600 800 1000 Frequency (MHz) Continued on the following page. 9 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Continued from the preceding page. c Frequency Characteristics TZS2R200 R200 1000 1000 100 100 10 10 2 Capacitance (pF) Q 1 200 400 600 800 1000 Frequency (MHz) c Land Pattern 3.2 1.0 2.1 Tolerance: 0.1 in mm c Temperature Profile Reflow Soldering Profile wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) T5 T4 T3 T2 Temperature (C) Temperature (C) qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) T1 t2 Limit Profile t3 Standard Profile t1 T3 T2 t1 time (s) Standard Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. t2 T1 Heating Temp. (T2) Time (t2) 220C 30 to 60sec. Standard Profile time (s) Standard Profile Peak Cycle temperature of reflow (T3) 2453C 2 times Temp. (T1) Time (t1) Temp. (T2) Time (t2) Peak temperature (T3) 150C 60 to 120sec. 183C 30sec. 230 +5/-0C Pre-heating Heating Cycle of reflow 1 time Limit Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. Heating Temp. (T4) 230C Time (t3) Peak Cycle temperature of reflow (T5) 30 to 50sec. 260 +5/-0C 2 times Soldering Iron Standard Profile 10 Temperature of soldering iron tip Soldering time Soldering iron power output Cycle of soldering iron 35010C 3sec. max. 30W max. 1 time T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above 2 c Notice (Soldering and Mounting) 1. Soldering (1) TZS2 series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 100 micro m to 150 micro m and the dimension of land pattern should be Murata's standard land pattern used at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to flux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply flux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed metal rotor or contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) Use a pick-up nozzle of a suitable dimension. (1.8mm external diameter and 1.3mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) c Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA: KMDR050 (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT050 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 11 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Ceramic Trimmer Capacitors TZY2 Series c Features 1.0 2.50.2 1.25max. 0.95 0.45 0.5 1.4 3 3.20.2 1. Small and thin size with external dimensions of 2.5(W)x3.2(L)x1.25max.(H)mm. 2. New shape of cover can improve the flux invasion compared with current products. 3. Improvement of the adhesion between rotor and stator leads to superior stability. 4. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after reflow soldering. 5. Suitable for high frequency circuit due to high self-resonant frequency (4.8GHz of TZY2Z010 at 1.0pF setting). (Tolerance:in0.1 mm) c Applications 1. Crystal oscillators 2. Crystal filters 3. Pagers 4. Cordless telephones 5. PHS 6. Hand radios 7. Cellular telephones 8. Watches 9. Remote keyless entry systems 10. W-LAN 11. Radar detectors 12. Compact radios 13. DVD 14. Burglarproof devices 15. Headphone stereos C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZY2Z010A001 0.5 1.0 +100/-0% NP0300ppm/C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZY2Z2R5A001 0.65 2.5 +100/-0% NP0300ppm/C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZY2Z030A001 1.5 3.0 +100/-0% NP0300ppm/C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2Z060A001 2.5 6.0 +100/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2Z100A001 3.0 10.0 +100/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2R200A001 4.5 20.0 +100/-0% N750500ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2R250A001 5.5 25.0 +100/-0% N750500ppm/C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2K450A001 8.0 45.0 +100/-0% N1000500ppm/C 300min. at 1MHz, Cmax. 25Vdc 55Vdc Part Number Insulation Resistance: 10000M ohm Torque: 0.5 to 5.0mNm c Construction Cover Metal Rotor Monolithic Stator 12 Operating Temperature Range: -25 to +85C T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Temperature Characteristics TZY2Z010 TZY2Z100 Z100 (NP0300 ppm/C) Cap.Change (%) Cap. Change (%) Z010 (NP0300 ppm/C) +8 +6 +4 +2 -10 0 +4 +2 Temp.(C) 0 65 20 -2 +6 Temp. (C) 0 -25 +8 85 -25 45 -10 -4 0 65 20 -2 85 45 -4 -6 -6 -8 -8 -10 -10 -12 -12 3 TZY2R200 TZY2K450 K450 (N1000500ppm/C) +8 +6 +4 Temp.(C) +2 20 -25 -10 45 65 +10 +8 +6 +4 +2 20 85 0 -2 0 +12 Cap. Change (%) Cap.Change (%) R200 (N750500 ppm/C) 25 0 -4 45 65 Temp. (C) 85 0 -2 -4 -6 -6 -8 -8 -10 -10 -12 -12 c Frequency Characteristics TZY2Z010 TZY2Z100 Z010 Z100 1000 1000 100 100 10 10 1000 100 Q 0.5pF set Capacitance (pF) Q 10 1.0pF set 1 0 2 4 Frequency (GHz) 6 8 1 200 400 600 800 1000 Frequency (MHz) Continued on the following page. 13 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Continued from the preceding page. c Frequency Characteristics TZY2R200 TZY2K450 R200 K450 1000 100 100 Capacitance (pF) Q 10 3 1 1000 1000 100 100 10 10 Capacitance (pF) 1000 Q 10 200 400 600 800 1 1000 200 400 600 800 Frequency (MHz) Frequency (MHz) c Land Pattern 4.0 1.2 2.4 Tolerance: 0.1 in mm c Temperature Profile Reflow Soldering Profile wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) T5 T4 T3 T2 Temperature (C) Temperature (C) qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) T1 t2 Limit Profile t3 Standard Profile t1 T3 T2 t1 time (s) Standard Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. t2 T1 Heating Temp. (T2) Time (t2) 220C 30 to 60sec. Standard Profile time (s) Standard Profile Peak Cycle temperature of reflow (T3) 2453C 2 times Temp. (T1) Time (t1) Temp. (T2) Time (t2) Peak temperature (T3) 150C 60 to 120sec. 183C 30sec. 230 +5/-0C Pre-heating Heating Cycle of reflow 1 time Limit Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. Heating Temp. (T4) 230C Time (t3) Peak Cycle temperature of reflow (T5) 30 to 50sec. 260 +5/-0C 2 times Soldering Iron Standard Profile 14 Temperature of soldering iron tip Soldering time Soldering iron power output Cycle of soldering iron 35010C 3sec. max. 30W max. 1 time T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above 3 c Notice (Soldering and Mounting) 1. Soldering (1) TZY2 series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 120 micro m to 170 micro m and the dimension of land pattern should be Murata's standard land pattern used at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to flux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply flux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed metal rotor or contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) Use a pick-up nozzle of a suitable dimension. (1.8mm external diameter and 1.3mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) c Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. (1) Recommended screwdriver for manual adjustment ENGINEER INC.: DA-89 (Murata P/N is KMDR060) (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT060 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 15 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Ceramic Trimmer Capacitors TZV2 Series c Features 3.20.2 0.5 Depth 0.2 4 1.0 2.30.2 1. Small size with external dimensions of 2.3(W)x3.2(L)x1.45max.(H)mm. 2. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after reflow soldering. 3. Designed for automatic placement in surface mount applications. 4. Funnel shaped metal case enables in-process automatic adjustment. Marking(6pF) 1.4 1.45max. Marking(10pF) Tolerance: 0.1 in mm c Applications 1. Crystal oscillator 2. Crystal filters 3. Hand radios 4. Cordless telephones 5. Cellular telephones 6. Tuner packs 7. Pagers 8. Remote keyless entry systems 9. PHS 10. Radar detectors 11. W-LAN 12. Compact radios 13. Headphone stereos 14. DVD 15. Burglarproof devices C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZV2Z2R5A110 0.65 2.5 +100/-0% NP0300ppm/C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZV2Z030A110 1.5 3.0 +100/-0% NP0300ppm/C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZV2Z060A110 2.5 6.0 +100/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZV2Z100A110 3.0 10.0 +100/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZV2R200A110 4.5 20.0 +100/-0% N750500ppm/C 500min. at 1MHz, Cmax. 25Vdc 55Vdc Part Number Insulation Resistance: 10000M ohm Torque: 1.0 to 9.8mNm Operating Temperature Range: -25 to +85C c Construction Cover Spring Washer Metal Rotor Monolithic Stator 16 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Temperature Characteristics TZV2Z2R5 TZV2Z060 Z060 (NP0300 ppm/C) Cap.Change (%) Cap.Change (%) Z2R5 (NP0300 ppm/C) +8 +6 +4 +2 -10 -2 0 +6 +4 Temp.(C) 0 -25 +8 +2 85 -25 45 -10 -4 -8 -10 -12 -12 TZV2Z100 TZV2R200 R200 (N750500 ppm/C) Cap.Change (%) Cap.Change (%) Z100 (NP0300 ppm/C) +8 +6 +4 +2 +8 +6 65 20 +2 20 -25 85 -10 0 45 4 +4 Temp.(C) 0 -2 Temp.(C) -6 -10 0 45 -4 -8 -10 85 20 -2 0 -6 -25 65 0 65 20 Temp.(C) 45 65 85 0 -2 -4 -4 -6 -6 -8 -8 -10 -10 -12 -12 c Frequency Characteristics TZV2Z2R5 TZV2Z060 1000 1000 1000 100 100 100 100 10 10 Q 10 10 1 Capacitance (pF) 1000 Q 1 500 1000 1500 2000 Frequency (MHz) 2500 3000 500 1000 1500 Capacitance (pF) Z060 Z2R5 2000 Frequency (MHz) Continued on the following page. 17 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Continued from the preceding page. c Frequency Characteristics TZV2Z100 TZV2R200 R200 Z100 1000 100 100 10 10 1 1000 100 100 10 10 Q Capacitance (pF) Q 1000 Capacitance (pF) 1000 1 200 400 600 800 1000 200 400 800 1000 c Land Pattern 4.0 1.2 2.4 Tolerance: 0.1 in mm c Temperature Profile Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) T5 T4 T3 T2 Temperature (C) Temperature (C) 4 600 Frequency (MHz) Frequency (MHz) T1 t2 Limit Profile t3 Standard Profile t1 T3 T2 t1 time (s) Standard Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. t2 T1 Heating Temp. (T2) Time (t2) 220C 30 to 60sec. Standard Profile time (s) Standard Profile Peak Cycle temperature of reflow (T3) 2453C 2 times Temp. (T1) Time (t1) Temp. (T2) Time (t2) Peak temperature (T3) 150C 60 to 120sec. 183C 30sec. 230 +5/-0C Pre-heating Heating Cycle of reflow 1 time Limit Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. Heating Temp. (T4) 230C Time (t3) Peak Cycle temperature of reflow (T5) 30 to 50sec. 260 +5/-0C 2 times Soldering Iron Standard Profile 18 Temperature of soldering iron tip Soldering time Soldering iron power output Cycle of soldering iron 35010C 3sec. max. 30W max. 1 time T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above c Notice (Soldering and Mounting) 1. Soldering (1) TZV2 series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 120 micro m to 170 micro m and the dimension of land pattern should be Murata's standard land pattern used at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to flux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply flux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed metal rotor or contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) Use a pick-up nozzle of a suitable dimension. (1.8mm external diameter and 1.3mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) 4 c Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. (1) Recommended screwdriver for manual adjustment VESSEL: No.9000 -0.9x30 (Murata P/N : KMDR020) (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT020 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 19 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Ceramic Trimmer Capacitors 1. Small size with external dimension of 3.2(W)x4.5(L)x1.6(H)mm. 2. Color coded stator permits easy identification of capacitance and reduces mounting errors. 3. Can be adjusted with conventional adjustment tools having a thickness of 0.5mm. 4. Designed for automatic placement in surface mount applications. 5. Heat resistant resin withstands reflow soldering temperatures. 0.8 0.75 c Features 3.2 TZC3 Series 0.5 2.5 dia. 1.6 0.35 4.5 0.8 4.5 0.6 0.6 Tolerance: 0.1 in mm c Applications 5 1. Compact radios 2. Headphones 3. Pagers 4. Portable radio equipment 5. Hybrid ICs 6. Cellular telephones 7. Cordless telephones 8. Remote keyless entry systems Part Number C min. (max.) (pF) C max. (pF) TZC3Z030A110 1.4 3.0 +50/-0% NP0300ppm/C 300min. at 1MHz, Cmax. 100Vdc 220Vdc TZC3Z060A110 2.0 6.0 +50/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZC3R100A110 3.0 10.0 +50/-0% N750300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White TZC3P200A110 5.0 20.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Red TZC3P300A110 6.5 30.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Green Insulation Resistance: 10000M ohm TC Torque: 1.5 to 9.8mNm c Construction Center axis Rotor spring terminal Ceramic plate Stator (One molded injection with stator terminal) Stator terminal 20 Q Rated Voltage Withstanding Voltage Stator/Case Color Operating Temperature Range: -25 to +85C Brown T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Temperature Characteristics TZC3Z030 TZC3Z060 Z060 (NP0300 ppm/C) Cap.Change (%) Cap.Change (%) Z030 (NP0300 ppm/C) +8 +6 +4 Temp.(C) +8 +6 +4 -25 20 0 -10 45 -2 85 -25 65 -10 0 20 -2 -4 -4 -6 -6 -8 -8 -10 -10 -12 -12 TZC3R100 -10 0 Cap.Change (%) Cap.Change (%) -25 +6 +4 20 -2 65 85 P200 (N1200500ppm/C) +8 45 45 TZC3P200 R100 (N750300 ppm/C) +2 0 Temp.(C) +2 0 +2 0 65 +8 +6 +4 +2 0 85 Temp.(C) -25 -10 0 45 65 20 -2 -4 -4 -6 -6 -8 -8 -10 -10 -12 -12 85 Temp.(C) 5 c Frequency Characteristics TZC3Z030 TZC3Z060 1000 100 100 10 10 1 Capacitance (pF) Q 1000 Q 1000 1000 100 100 10 10 Capacitance (pF) Z060 Z030 1 100 500 1000 1500 Frequency (MHz) 2000 100 500 1000 1500 2000 Frequency (MHz) Continued on the following page. 21 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Continued from the preceding page. c Frequency Characteristics TZC3R100 TZC3P200 R100 1000 100 100 10 10 Q 1000 1000 100 100 10 10 Capacitance (pF) 1000 Capacitance (pF) Q P200 1 1 200 400 600 800 200 1000 400 600 800 1000 Frequency (MHz) Frequency (MHz) c Land Pattern +0 5.0 -0.5 3.30.1 1.00.1 5 Tolerance: 0.1 in mm c Temperature Profile Reflow Soldering Profile wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) T5 T4 T3 T2 Temperature (C) Temperature (C) qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) T1 t2 Limit Profile t3 Standard Profile t1 T3 T2 t1 time (s) Standard Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. t2 T1 Heating Temp. (T2) Time (t2) 220C 30 to 60sec. Standard Profile time (s) Standard Profile Peak Cycle temperature of reflow (T3) 2453C 2 times Temp. (T1) Time (t1) Temp. (T2) Time (t2) Peak temperature (T3) 150C 60 to 120sec. 183C 30sec. 230 +5/-0C Pre-heating Heating Cycle of reflow 1 time Limit Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. Heating Temp. (T4) 230C Time (t3) Peak Cycle temperature of reflow (T5) 30 to 50sec. 260 +5/-0C 2 times Soldering Iron Standard Profile 22 Temperature of soldering iron tip Soldering time Soldering iron power output Cycle of soldering iron 35010C 3sec. max. 30W max. 1 time T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above c Notice (Soldering and Mounting) 1. Soldering (1) TZC3 series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 150 micro m to 200 micro m and the dimension of land pattern should be Murata's standard land pattern used at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to flux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply flux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed metal rotor or contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. (8) When soldering the TZC3 series, the solder should not flow into the staking part of the substrate. If such flow does occur, driver slot rotation will be damaged. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) Use a pick-up nozzle of a suitable dimension. (2.5mm external diameter and 1.5mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) c Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. (1) Recommended screwdriver for manual adjustment Standard type --> MURATA: KMDR010 Cross slot type --> VESSEL: NO.9000+1.7x30 (Murata P/N is KMDR080) (2) Recommended screwdriver bit for automatic adjustment Standard type --> MURATA: KMBT010 Cross slot type --> VESSEL: No.CA-11 (Murata P/N is KMBT080) 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 23 5 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Ceramic Trimmer Capacitors TZW4 Series c Features 5.20.2 4.20.2 2.6 max. 0.6 1.6 0.4 Depth 1. To meet high power application due to withstanding voltage 550Vdc. 2. Extremely high self-resonant frequency. (More than 3GHz at rated Cmax.) 3. Typical application: Impedance matching for Cellular Base Station. 4. High Q value in more than VHF, UHF and Microwave bands. (More than 200 in 500MHz, C max.) 5. Available for pick and place machine. Possible thinner design due to 2.6mm low profile. 6. Non-electrical contact construction (rotor as middle electrode) provides high reliability. 7. Compact size: 4.2(W)x5.2(L)x2.6max.(H)mm. 2.80.2 3.0 2.2 +0.1 0.3 -0.2 0.1 ( Tolerance: ) in mm c Applications 1. Transmitting power amplifier for Cellular base station 2. Transmitting amplifier for PHS base station 3. High frequency electric circuit 4. High power radio transmission 5. Transponder amplifier for cable TV Part Number 6 C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZW4Z010A001 0.4 1.0 +50/-0% NP0150ppm/C 200min. at 500MHz, Cmax. 250Vdc 550Vdc TZW4Z1R5A001 0.4 1.5 +100/-0% NP0150ppm/C 200min. at 500MHz, Cmax. 250Vdc 550Vdc Insulation Resistance: 10000M ohm Torque: 1.5 to 10.0mNm Operating Temperature Range: -55 to +125C c Construction Cover Metal Rotor Monolithic Stator 24 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. c Temperature Characteristics c Frequency Characteristics TZW4Z1R5 TZW4Z1R5 Cap.Change (%) Z1R5 (NP0150 ppm/C) 1000 +6 +4 +2 -25 -10 0 Z1R5 +8 Temp. (C) 0 -55 Aug.10,2012 20 45 -2 65 85 105 125 1.5pF set 100 -4 -6 -8 Q -10 -12 10 1 500 1000 1500 2000 2500 3000 Frequency (MHz) c Land Pattern 7.0 2.5 4.4 Tolerance: 0.1 in mm 6 c Temperature Profile Reflow Soldering Profile wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) T5 T4 T3 T2 Temperature (C) Temperature (C) qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) T1 t2 Limit Profile t3 Standard Profile t1 T3 T2 t1 time (s) Standard Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. t2 T1 Heating Temp. (T2) Time (t2) 220C 30 to 60sec. Standard Profile time (s) Standard Profile Peak Cycle temperature of reflow (T3) 2453C 2 times Temp. (T1) Time (t1) Temp. (T2) Time (t2) Peak temperature (T3) 150C 60 to 120sec. 183C 30sec. 230 +5/-0C Pre-heating Heating Cycle of reflow 1 time Limit Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. Heating Temp. (T4) 230C Time (t3) Peak Cycle temperature of reflow (T5) 30 to 50sec. 260 +5/-0C 2 times Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output Cycle of soldering iron 35010C 3sec. max. 30W max. 1 time 25 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty/dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above c Notice (Soldering and Mounting) 6 1. Soldering (1) TZW4 series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 150 micro m to 200 micro m and the dimension of land pattern should be Murata's standard land pattern used at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to flux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply flux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed metal rotor or the contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breaking. (3) Use a pick-up nozzle of a suitable dimension. (1.8mm external diameter and 1.1mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. c Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. -Recommended screwdriver for manual adjustment VESSEL : No.9000 -1.3x30 (Murata P/N is KMDR130) 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 26 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. T13E.pdf Aug.10,2012 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Ceramic Trimmer Capacitors TZB4 Series 0.60.1 Depth 0.5 2.40.1 1. Miniature rectangular shape: 4.0(W)x4.5(L)x3.0(H)mm. 2. Color coded case facilitates identification of capacitance range. 3. Designed for automatic placement in surface mount applications. 4. Designed to withstand flux baths and solder baths (with cover film type). 5. Can be temporarily attached to PCB with adhesives (Terminal style A and B). 6. Can be reflow and flow (with cover film type) soldering method. 7. Stable characteristics over a wide frequency range. (Resonant frequency: 1000MHz min. / 6pF) 1.40.1 dia. 4.00.2 c Features 3.00.2 4.50.2 2.70.3 1.20.1 A Type Tolerance: 0.5 in mm 5.0 0.60.1 Depth 0.5 c Applications 4.00.2 2.40.1 1.40.1 dia. 4.50.2 3.00.2 1. Car audio systems 2. Cordless telephones 3. Hybrid ICs 4. Pagers 5. Remote keyless entry systems 6. Tuner packs 7. Surveillance cameras 8. DVD 9. Burglarproof devices 1.20.1 B Type Tolerance: 0.5 in mm 7.0 4.00.2 0.80.1 2.40.1 0.60.1 Depth 0.5 4.50.2 4.00.2 7 3.00.2 7.0 4.8 4.5 E Type Tolerance: 0.5 in mm Part Number C min. (max.) (pF) C max. (pF) TC TZB4Z030pp10 1.4 3.0 +50/-0% NP0200ppm/C 300min. at 1MHz, Cmax 100Vdc 220Vdc TZB4Z060pp10 2.0 6.0 +50/-0% NP0200ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZB4Z100pp10 3.0 10.0 +50/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White TZB4R200pp10 4.5 20.0 +50/-0% N750400ppm/C 500min. at 1MHz, Cmax 100Vdc 220Vdc Red TZB4P300pp10 6.5 30.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax 100Vdc 220Vdc Green TZB4P400pp10 8.5 40.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax 100Vdc 220Vdc Yellow TZB4Z250pp10 4.0 25.0 +100/-0% NP0300ppm/C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black+Marking TZB4R500pp10 7.0 50.0 +100/-0% N750300ppm/C 300min. at 1MHz, Cmax 50Vdc 110Vdc Black+Marking Q Rated Voltage Withstanding Voltage Stator/Case Color Brown Insulation Resistance: 10000M ohm Torque: 1.5 to 9.8mNm Operating Temperature Range: -25 to +85C First blank: Terminal Type Second blank: Cover film codes (A: not provided, B: provided) ex. TZB4Z100A B10: Terminal Type is A, and Cover film is provided. 27 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Construction Cover Film (Cover film type) Rotor Spring Plastic Case - Metal Rotor Ceramic Plate Stator Terminal + Rotor Terminal c Land Pattern/Mounting Holes A Type B Type +0 8.0 - 0.5 +0 7.0 - 0.5 4.00.2 1.60.1 1.60.1 2.40.2 (in mm) (in mm) E Type 8.0 +0 - 0.5 1.20.1 4.20.2 7 3.20.2 dia. (in mm) c Temperature Characteristics TZB4Z060 TZB4Z100 Z100 (NP0300ppm/C) +10 +8 +6 +4 +2 +20 -25 0 0 -2 Cap.Change (%) Cap.Change (%) Z060 (NP0200ppm/C) +55 +85 Temp. (C) +10 +8 +6 +4 +2 +20 -25 0 0 -2 -4 -4 -6 -6 -8 -8 -10 -10 +55 +85 Temp. (C) Continued on the following page. 28 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Continued from the preceding page. c Temperature Characteristics TZB4R200 TZB4R500 +10 +8 +6 +4 +2 +20 -25 R500 (N750300ppm/C) Cap.Change (%) Cap.Change (%) R200 (N750400ppm/C) +55 0 -2 0 +10 +8 +6 +4 +2 +20 +85 Temp. (C) -25 +55 0 -2 0 -4 -4 -6 -6 -8 -8 -10 -10 +85 Temp.(C) c Frequency Characteristics TZB4Z060 TZB4Z100 Z060 1000 100 100 Q 100 100 10 10 1 100 200 300 400 500 600 700 800 900 1000 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) Frequency (MHz) TZB4R200 TZB4R500 R500 R200 100 Q 100 10 10 1 100 200 300 400 Frequency (MHz) 500 600 Capacitance (pF) 1000 1000 Q 1000 1000 100 100 10 10 1 100 200 300 400 7 Capacitance (pF) 1 1000 Q 10 10 1000 Capacitance (pF) 1000 Capacitance (pF) Z100 500 Frequency (MHz) 29 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Temperature Profile Flow Soldering Profile Temperature (C) Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb) T3 T2 Standard Profile t2 Limit Profile T1 Pre-heating Standard Profile t1 Heating Temp. (T1) Time (t1) Temp. (T2) Time (t2) Cycle of reflow 150C 60 to 120sec. 250C 5sec. max. 1 time time (s) Limit Profile Pre-heating s )MMERSE THE BODY IN SOLDER BATH AVAILABLE FOR COVER FILM TYPE Heating Temp. (T1) Time (t1) Temp. (T3) Time (t2) Cycle of reflow 150C 60 to 120sec. 2653C 5sec. max. 2 times Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) Temperature (C) Temperature (C) T5 T3 T2 T4 T1 t2 Limit Profile t3 Standard Profile T3 T2 t1 time (s) t1 Standard Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. t2 T1 Heating Temp. (T2) Time (t2) 220C 30 to 60sec. Standard Profile time (s) Standard Profile Peak Cycle temperature of reflow (T3) 2453C 2 times Temp. (T1) Time (t1) Temp. (T2) Time (t2) Peak temperature (T3) 150C 60 to 120sec. 183C 30sec. 230 +5/-0C Pre-heating Heating Cycle of reflow 1 time Limit Profile Pre-heating Temp. (T1) Time (t1) 150 to 180C 60 to 120sec. Heating Temp. (T4) 230C Time (t3) Peak Cycle temperature of reflow (T5) 30 to 50sec. 260 +5/-0C 2 times s !VAILABLE FOR TERMINAL SHAPE ! " AND % Soldering Iron Standard Profile 7 Temperature of soldering iron tip Soldering time Soldering iron power output Cycle of soldering iron 35010C 3sec. max. 30W max. 1 time c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 30 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. T13E.pdf Aug.10,2012 c Notice (Soldering and Mounting) 1. Soldering (1) Can be soldered by reflow soldering method, flow soldering method, and soldering iron. (2) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 150 micro m to 200 micro m and the dimension of land pattern should be Murata's standard land pattern used at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to flux wicking up. (5) When using soldering iron, the string solder shall be applied to the lower part of the terminal only. Do not apply flux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed rotor or contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the plastic case of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) When bending the terminals, do not apply excessive force to the body of the product to protect the terminal fixing part from damage. (4) Use a pick-up nozzle of a suitable dimension. > Without cover film type - External dimensions of 4.5x4.0mm and 2.5mm bore diameter. > With cover film type - 4.0mm external diameter and 2.0mm bore diameter. 3. Cleaning [with cover film type] Isopropyl alcohol and ethyl alcohol are available material for cleaning. If you use any other type of solvent, please evaluate performance in your application. Moreover, please confirm that no damage has occurred to the trimmer capacitor after cleaning in your conditions. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) c Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA: KMDR010 (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT010 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. 4. Do not break the cover film before the completion of PCB mounting, soldering, and cleaning. 5. Do not clean the trimmer capacitor after the cover film has been broken. 6. To break the cover film, first turn the screwdriver more than 360, and set the capacitance value. (Inserting the screwdriver only will not break the cover film.) 7 c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 31 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Ceramic Trimmer Capacitors TZ03 Series c Features 2.50.2 dia. 0.50.2 Depth 0.5 min. 4 6 dia. 1. Color coded case facilitates identification of capacitance range. 2. Sealed construction prevents the penetration of flux and dust. 3. Available in two adjustment styles: Top/Rear. 4. Cross-shaped (+) slot enables automatic adjustment. 4.8 6 .05 1.00.1 3.3 0 c Applications F Type 1. Car audio systems 2. Car clocks 3. Stereos 4. Radio cassette tape recorders 5. Cordless telephones 6. Video games 7. Compact radio equipment 8. Remote keyless entry systems 9. Burglarproof devices 0.2 0.2 1.00.1 5 0.0 5 6.6 Tolerance: 0.5 in mm 2.50.2 dia. 4.0 6.0 dia. 0.50.2 Depth 0.5 min. 6.0 7.8 6.4 1.20.1 3.0 4.8 3.4 5 0.2 5 0.2 0.0 0.0 5 1.00.1 3.0 N Type Tolerance: 0.5 in mm 8 Part Number C min. (max.) (pF) C max. (pF) TC Q TZ03Z2R3p169 1.25 2.3 +50/-0% NP0200ppm/C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Black TZ03Z050p169 1.5 5.0 +50/-0% NP0200ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03Z070p169 2.0 7.0 +50/-0% NP0200ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03Z100p169 2.7 10.0 +50/-0% NP0200ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03R200p169 4.2 20.0 +50/-0% N750300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Red TZ03R300p169 5.2 30.0 +50/-0% N750300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Green TZ03P450p169 6.8 45.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Yellow TZ03P600p169 9.8 60.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Brown TZ03Z500p169 6.0 50.0 +100/-0% NP0300ppm/C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Orange Rated Voltage Withstanding Voltage Stator/Case Color TZ03R900p169 9.0 90.0 +100/-0% N750300ppm/C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black+Dot TZ03R121p169 10.0 120.0 +100/-0% N750300ppm/C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black Insulation Resistance: 10000M ohm Torque: 2.0 to 14.7mNm A blank column is filled with terminal type codes. 32 Operating Temperature Range: -25 to +85C T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 c Construction c Mounting Holes F Type N Type 3 0. 1 di a. 1.10.1 1.30.1 1. 1. 3 0. 1 di a. 3 dia. 3 3.3 5 Tolerance: 0.5 in mm (Tolerance:in0.5 mm) c Temperature Characteristics TZ03Z070 TZ03R200 Z070 (NP0200ppm/C) +6 Cap.Change (%) +6 +4 +4 +2 +2 55 85 -25 0 0 0 -2 -2 Temp. (C) -4 -4 -6 -6 TZ03P600 TZ03Z500 P600 (N1200500ppm/C) +6 +4 +8 +6 +4 +2 20 0 0 -2 -4 +2 55 8 Z500 (NP0300ppm/C) Cap.Change (%) +8 -25 85 Temp. (C) 55 85 20 85 Temp. (C) Cap.Change (%) 0 55 20 20 -25 Cap.Change (%) R200 (N750300ppm/C) -25 0 0 -2 Temp. (C) -4 -6 -6 -8 -8 -10 -10 Continued on the following page. 33 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Continued from the preceding page. c Temperature Characteristics TZ03R121 +8 +6 +4 Cap.Change (%) R121 (N750300ppm/C) +2 20 -25 0 55 0 -2 85 Temp. (C) -4 -6 -8 -10 c Frequency Characteristics TZ03Z070 TZ03R200 R200 1000 100 100 Q 10 1000 100 100 10 10 Q 10 1 1000 100 200 300 400 500 600 700 800 900 1000 1 100 200 300 400 Capacitance (pF) 1000 Capacitance (pF) Z070 500 Frequency (MHz) Frequency (MHz) TZ03P450 TZ03P600 P600 1000 100 100 Q 10 10 1 100 200 300 Frequency (MHz) 400 500 1000 1000 100 100 10 10 Q 1 100 200 300 400 Capacitance (pF) 8 1000 Capacitance (pF) P450 500 Frequency (MHz) Continued on the following page. 34 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Continued from the preceding page. c Frequency Characteristics TZ03R900 1000 1000 100 100 10 10 Q 1 100 200 300 400 Capacitance (pF) R900 500 Frequency (MHz) c Temperature Profile Flow Soldering Profile Temperature (C) Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb) T3 T2 Standard Profile t2 Heating T1 Limit Profile Standard Profile t1 Pre-heating Heating Temp. (T1) Time (t1) Temp. (T2) Time (t2) Cycle of reflow 150C 60 to 120sec. 250C 5sec. max. 1 time time (s) Pre-heating Limit Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T3) Time (t2) Cycle of reflow 150C 60 to 120sec. 2653C 5sec. max. 2 times Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output Cycle of soldering iron 35010C 3sec. max. 30W max. 1 time c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Open the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackaging. 7. Do not store under direct sunlight. 8. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above 8 35 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. c Notice (Soldering and Mounting) 1. Soldering (1) TZ03 series can be soldered by flow soldering method and soldering iron. Do not use reflow soldering method. (2) Soldering conditions Refer to the temperature profile. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The dimension of mounting hole should be Murata's standard mounting hole used at flow soldering. The amount of solder is critical. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to flux wicking up. (4) When using soldering iron, the string solder shall be applied to the lower part of the terminal only. Do not apply flux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed rotor or the contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the plastic case of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (5) Our recommended chlorine content of string solder is 0.5wt% max. (6) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Use the suitable PCB holes that are the same pitch as the terminal of the trimmer capacitor. If it does not fit the terminal, excessive stress may be applied to the terminal and the trimmer capacitor may deviate from the specified characteristics. (3) Do not apply bending stress more than 10.0N (Ref: 1kgf) after the trimmer capacitor has been mounted on the PCB. (4) Mount trimmer capacitor in contact with PCB. (5) When bending the terminals, do not apply excessive force to the body of the product to protect the terminal fixing part from damage. 3. Cleaning Isopropyl alcohol and ethyl alcohol are available material for cleaning. If you use any other type of solvents, please evaluate performance in your application. Moreover, please confirm that no damage has occurred to the trimmer capacitor after cleaning in your conditions. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) c Notice (Handling) 8 1. Use suitable screwdrivers that fit comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA: KMDR010 (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT010 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 36 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. T13E.pdf Aug.10,2012 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Packaging c Minimum Quantity Minimum Quantity (pcs.) Part Number o180mm Reel o330mm Reel Bulk TZR1 3000 - 500 TZS2 3000 - 500 TZY2 2000 - 500 TZV2 2000 - 500 TZC3 1000 - 500 TZW4 500 - 100 TZB4 500 2500 500 TZ03 - - 1000 c Tape Dimensions TZR1 Series TZS2 Series 2.00.1 4.00.1 4.00.1 1.250.2 +0.1 1.5 -0 dia. 3.00.2 3.50.1 0.250.1 8.00.3 1.750.1 2.00.2 3.50.1 1.5 +0.1 -0 dia. 0.250.1 8.00.3 1.050.2 4.00.1 1.750.1 2.00.1 4.00.1 2.50.2 1.80.2 (in mm) (in mm) TZY2/TZV2 Series 1.5 +0.1 - 0 dia. t 4.0 2 4 0.3 5.5 4.90.2 8.00.2 3.5 A 3.60.2 2.00.2 120.3 A 0.25 1.75 2.0 1.75 1.5 +0.1 - 0 dia. TZC3 Series A-Across section A A A-Across section 3.60.2 8 2.70.2 t=TZY2 (TZVY2) : 1.60.2 TZV2 (TZV02) : 1.90.2 4.0 Tolerance : 0.1 in mm Tolerance: 0.1 in mm TZW4 Series TZB4 Series A 8 4.6 4 .0 A 5.5 1.75 2.0 120.2 5.6 5.5 A 8.0 0.3 4.8 7.5 4 1.75 2 +0.1 1.5 - 0 dia. 2.6 A-Across section 3.550.2 0.30.1 12.00.3 1.5 +0.1 - 0 dia. 1.8 A-Across section A 4.3 Tolerance: 0.1 in mm Direction of feed Tolerance: 0.1 in mm Continued on the following page. 37 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Packaging Continued from the preceding page. c Reel Dimensions (180mm diameter) TZR1/TZS2/TZY2/TZV2 Series TZC3/TZW4/TZB4 Series 2.00.5 21.00.8 dia. 50 min. 13.00.5 dia. 50 min. 13.00.5 dia. 2.00.5 21.00.8 dia. 9.01.0 13.01.0 13.01.0 1782 dia. 1782 dia. (in mm) (in mm) c Reel Dimensions (330mm diameter) TZB4 Series 50 min. 13.00.5 dia. 2.00.5 21.00.8 dia. 13.51.0 17.51.0 3282 dia. (in mm) 38 17.01.0 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Recommended Adjustment Tools Please use the following recommended screwdrivers. You can order these drivers using the part numbers below. Although you can also adjust the capacitance value using commercial products, please use one with the same head size as the driver listed below. c For Manual Adjustment Series MURATA Model Number Manufacturer's Model Number Shape 80 1.5 TZR1 KMDR160 MURATA MFG. KMDR160 Bit shape: Minus (0.3x0.13) (in mm) 80 1.5 TZS2 KMDR050 MURATA MFG. KMDR050 Bit shape: Square (0.54x0.54) (in mm) 108 18 TZY2 KMDR060 ENGINEER INC. DA-89 Bit shape: Minus (0.8x0.35) (in mm) 125 15 TZV2 KMDR020 VESSEL MFG. 9000 0.9-30 NO.9000 -0.9g30 Bit shape: Minus (0.9x0.4) (in mm) 122 TZC3 TZB4 50 20 KMDR010 TZ03 MURATA MFG. KMDR010 Bit shape: Minus (2.2x0.4) (in mm) 125 15 TZW4 KMDR130 VESSEL MFG. CERAMIC BLADE ELECTRONICS NO.9000 -1.3g30 Bit shape: Minus (1.3x30) 9000 1.3-30 (in mm) Continued on the following page. 39 T13E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Aug.10,2012 Recommended Adjustment Tools Continued from the preceding page. c For Automatic Adjustment Series MURATA Model Number Manufacturer's Model Number Shape 20 2 KMBT050 MURATA MFG. KMBT050 1.8 dia. TZS2 Bit shape: Square (0.54x0.54) (in mm) 25 0.6 KMBT060 MURATA MFG. KMBT060 Bit shape: Minus (0.56x0.25) 2.4 dia. TZY2 (in mm) 25 0.6 KMBT020 MURATA MFG. KMBT020 Bit shape: Minus (0.9x0.4) 2.4 dia. TZV2 (in mm) TZC3 TZB4 TZ03 KMBT010 MURATA MFG. KMBT010 Bit shape: Minus (2.2x0.4) 2.2 dia. 30 (in mm) 40 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. T13E.pdf Aug.10,2012 Qualified Standards The products listed herein have been produced by a QS9000 and ISO9001 certified factory MURATA FACTORY Sabae Murata Mfg. Co., Ltd. No ODCs (Ozone Depleting Chemicals) are used on any Murata trimmer potentiometers. 41 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. T13E.pdf Aug.10,2012