High Voltage Chip Resistors - HVCR Features * High Voltage Chip Resistors * Flat Chip Resistors for surface mount applications Dimensions L C C C C T w 0402 0603 0805 1206 2010 2512 L (Length) Inches (mm) 0.040 .002 (1.0 0.05) 0.063 .004 (1.6 0.1) 0.079 .006 (2.0 0.15) 0.126 .006 (3.2 0.15) 0.197 .006 (5.0 0.15) 0.248 .006 (6.3 0.15) W (Width) Inches (mm) 0.020 .001 (0.5 0.02) 0.031 .004 (0.8 0.1) 0.050 .006 (1.25 0.15) 0.063 .006 (1.6 0.15) 0.098 .006 (2.50 0.15) 0.126 .006 (3.2 0.15) T (Thickness) Inches (mm) 0.014 .002 (0.35 .05) 0.018 .004 (0.45 0.1) 0.018 .006 (0.45 0.15) 0.022 .006 (0.56 0.15) 0.022 .006 (0.56 0.15) 0.022 .006 (0.56 0.15) C (End Band) Inches (mm) 0.008 .004 (0.2 0.1) 0.012 .006 (0.30 0.15) 0.014 .006 (0.35 0.15) 0.020 .008 (0.50 0.20) 0.024 .008 (0.60 0.20) 0.024 .008 (0.60 0.20) Structure 3 2 4 5 6 1 Description 1 Substrate Alumina 2 Resistive element Ruthenium Oxide (RuO2) 3 Protective coating Boro-Silicate Glass 4 Inner termination Silver Palladium (Ag-Pd) 5 Inner Plating Nickel (Ni) 6 Outer Plating Solder Plating, 100% matte Tin (Sn) All components in this section are RoHS compliant per the EU directives and definitions. For standard resistance values, please see "EIA Standard Resistance Values" on page 66. 49 5900 Shepherd Mountain Cove * Austin, TX 78730 Phone: 512 / 794-0081 * Fax: 512 / 794-0087 * Toll Free: 800 / 950-8365 e-mail: sales@venkel.com * www.venkel.com Specifications Series Power Rating at 70C Max. Working Voltage Max. Overload Voltage T.C.R. Temperature Coefficient of Resistance (PPM/C) Resistance Range HVCR0402-16W 0.063W *E = P R or 100V whichever is less 200V 10 - 1 Meg : 100 1.02Meg - 10 Meg : 200 10 - 10 Meg HVCR0603-10W 0.10W *E = P R or 100V whichever is less 200V 10 - 1 Meg : 100 1.02 Meg - 10 Meg : 200 10 - 10 Meg HVCR0805-8W 0.125W *E = P R or 300V whichever is less 600V 10 - 1 Meg : 100 1.02 Meg - 10 Meg : 200 10 - 10 Meg HVCR1206-4W 0.25W *E = P R or 500V whichever is less 1000V 10 - 1 Meg : 100 1.02 Meg - 10 Meg : 200 10 - 10 Meg HVCR2010-2W 0.50W *E = P R or 500V whichever is less 1000V 10 - 1 Meg : 100 1.02 Meg - 10 Meg : 200 10 - 10 Meg HVCR2512-1W 1.00W *E = P R or 500V whichever is less 1000V 10 - 1 Meg : 100 1.02 Meg - 10 Meg : 200 10 - 10 Meg Operating Temp. Range is -55C to +155C * DC Resistance Value of zero ohm is 50m ohms max. *E = P R where E = Rated Voltage (V); P = Rated Power (P) and R = Nominal Resistance (). 5900 Shepherd Mountain Cove * Austin, TX 78730 Phone: 512 / 794-0081 * Fax: 512 / 794-0087 * Toll Free: 800 / 950-8365 e-mail: sales@venkel.com * www.venkel.com 50 High Voltage Chip Resistors - HVCR Derating Curve 120 Rated power (%) 100 80 60 40 20 0 30 50 70 90 110 130 150 Ambient temperature (C) 170 How To Order HVCR1206-4W -- 103 J T SERIES 3 DIGIT (J TOL.) e.g. 2R2=2.2 103=10K 4 DIGIT (F TOL.) e.g. 10R2=10.2 1002=10k Jumper 3 zeros PACKAGING T: TAPE Standard Chip Resistor Termination TOLERANCE AT 25C finish is 100% matte Tin (Sn). F: 1% J: 5% (No Tolerance specified for the Zero Ohm) 0603 -- 1% Chip Resistors may not be marked. (For HVCR Series) Please consult your salesperson if marking is required. (See the data sheet on Marking Codes) * E-24 Standard Resistance values that are available in 1%, may be marked with the standard 3-digit code identifier or an alpha numeric code. For the alpha numeric marking see page 67 for details. * NOTE: See page 66 for Standard Resistance Values * NOTE: Other nominal resistance values may also be available, please contact your sales representative for further information. All components in this section are RoHS compliant per the EU directives and definitions. For standard resistance values, please see "EIA Standard Resistance Values" on page 66. 51 5900 Shepherd Mountain Cove * Austin, TX 78730 Phone: 512 / 794-0081 * Fax: 512 / 794-0087 * Toll Free: 800 / 950-8365 e-mail: sales@venkel.com * www.venkel.com Characteristics Item Test Basis: JIS-C-5202 Short-time Overload 2.5 x rated voltage DC for 5 sec. 70C, rated voltage for 1.5 hrs. Load Life on/0.5 hr. off for 1000 hrs. Resistance to Soldering Heat Temperature Cycling Solderability 260C for 10 seconds -55 ~ +125 C, 5 cycles. 230C, 3 seconds, flux applied Specification Requirements 1% +0.5, no arc evidence Typical within 0.4% <1 Meg 2% +0.1; > 1 Meg 3% -- 1% +0.05, no mechanical damage -- 1.0% 95% minimum coverage -- more than 97-98% +125C for 1,000 hours 3% +0.1, no mechanical damage within 0.5% Pull Terminal Strength 500G load for 30 seconds 1% +0.05, no mechanical damage within 0.2% PCB Terminal Strength 1/45mm bend for 10 seconds 1% +0.05, no mechanical damage within 0.2% 1% +0.05, no mechanical damage within 0.2% Dry Heat Resistance Moisture Resistance, Thermal Shock Moisture Load Life Insulation Resistance -55C to +125C, 5 cycles 40C, 95% R.H., 1.5 hr. on, 0.5 hr. off, 1,000 hours for 1 minute for 1 minute Low Temperature Exposure -- Max. Overload Voltage 1.5 times Rated Voltage Voltage Proof <1 Meg 2% +0.1; > 1 Meg 3% -55C for 1,000 hours 10 G more than 10 Meg No breakdown or flashover -- 3% +0.1, no mechanical damage within 0.5% 5900 Shepherd Mountain Cove * Austin, TX 78730 Phone: 512 / 794-0081 * Fax: 512 / 794-0087 * Toll Free: 800 / 950-8365 e-mail: sales@venkel.com * www.venkel.com 52