hmi_comfort_v2_quick_install_guide_page_1.eps 1 08.10.2018 09:21:01 Bediengerat einbauen Mounting the HMI device HMI 1 Bediengerat anschlieen Connecting the HMI device HMI 2 2.1 Wichtiger Hinweis - Important information - 1.1 Wichtiger Hinweis - Important information - Dieses Dokument ist lediglich eine Montageanleitung. Sicherheitshinweise, sowie die vollstandige Montage und Inbetriebnahme sind in der Betriebsanleitung beschrieben. This document provides simple installation instructions. Complete installation, commisioning and safety instructions are described in the operating instructions manual. ! VORSICHT Stellen Sie sicher, dass alle Anschlusskabel auerhalb des Bediengerats ausreichend zugentlastet sind. ! CAUTION Ensure that you install sufficient strain relief for all connection cables on the outside of the HMI device. ! HMI https://support.industry.siemens.com/cs/ ww/en/ps/22193/man 2.2 Potenzialausgleich - Equipotential bonding - 1.2 Zulassige Einbaulagen - Valid Mounting positions - All Comfort Panels Comfort Panels Touch 1 6 mm 0 C 40 C 0 C - 35 0 0 C 35 C 0 C 40 C 0 C 0- 3 5 4 40 C 55 C (15" devices, with restrictions)* 50 C (15" devices) 45 C (19"-22" devices) 35 C 0-35 0-35 TX 20 0 C 2 5 4 mm 3 * Erweiterter Neigungs- und Umgebungstemperaturbereich Extended inclination and ambient temperature range 1.3 Bediengerat einsetzen - Installing the HMI device - HMI mm Comfort Panel 0.5 2-6 3 Enclosure Type 4X/12 C 16 mm PROFIBUS PROFINET M ! VORSICHT Verlegen Sie Potenzialausgleichs- und Datenleitungen parallel mit minimalem Abstand. Verwenden Sie Leitungsschirme nicht zum Potenzialausgleich. Y CM MY w CY 1 2 CMY h K ! CAUTION Route equipotential bonding conductors and data cables in parallel with minimum clearance. Do not use conductor shields for equipotential bonding. Key Panels ! w y x z y Comfort Panels x Touch Panels y h +1 0 KP1500 450 291 TP1500 396 291 TP1900 465 319 TP2200 542 362 2.3 Stromversorgung anschlieen - Connecting the power supply - Verwenden Sie fur die DC-24-V-Versorgung nur Netzgerate mit sicherer elektrischer Trennung nach IEC 60364-4-41 bzw. HD 384.04.41 (VDE 0100, Teil 410), z. B. gema dem Standard SELV/PELV. For the 24 V DC supply, use only power supply units with safe electrical isolation in accordance with IEC 60364-4-41 or HD 384.04.41 (VDE 0100, Part 410), e.g. conforming to the SELV/PELV standard. DC-24-V IEC 60364-4-41 HD 384.04.41VDE 0100 410 SELV/PELV x z x +1 0 y x 15 y 50 z 10 Minimaler Freiraum zur Beluftung Minimum ventilation clearance 1.4 Bediengerat befestigen - Mounting the HMI device- Mounting clips steel 1 6 mm HMI 12 x 2 1 5 2 3 0,5 x 3 mm ! VORSICHT Drehmoment = 0,5 Nm KP1500 Comfort TP1500 Comfort TP1900 Comfort TP2200 Comfort 4 6 ! CAUTION Torque = 0.5 Nm ! = 0.5 Nm 0/OFF M 7 L+ hmi_comfort_v2_quick_install_guide_page_2.eps 1 08.10.2018 09:21:26 Projekt transferieren Transferring a project 3 3.3 Transfer starten - Starting transfer - 3.1 Projektierungs-PC anschlieen - Connecting a configuring PC - PC ! VORSICHT Beim Transfer eines Projekts wird das aktuelle Projekt auf dem Bediengerat uberschrieben. Falls erforderlich, sichern Sie vor dem Transfer die Daten. 1 ! CAUTION Transferring a project will overwrite the current project on your HMI device. If required, save existing data before the transfer. ! Transfer 2 WinCC HMI Moglichkeiten fur die Datenubertragung Data transmission options https://support.industry.siemens.com/cs/ww/en/view/49313233 1 2 0/OFF 1/ON 3 PC 3 4 LAN PC C 4 5 M Y 1/ON CM MY CY CMY K 3.2 Datenkanal parametrieren - Configuring the data channel - 5 Transfermodus einstellen 1 Setting transfer mode Settings https://support.industry.siemens.com/cs/ww/en/view/49313233 Technische Support-Zentrale Central Technical Support 2 Transfer 4 https://support.industry. siemens.com KP1500 Comfort TP1500 Comfort TP1900 Comfort TP2200 Comfort Reparatur und Ersatzteile Service and spare parts https://support.industry. siemens.com/sc/de/en/sc Bediengerat einbauen Mounting the HMI device HMI Bediengerat anschlieen Connecting the HMI device 3 PN/IE SIMATIC HMI 09/2018 A5E41474422-AB HMI Projekt transferieren Transferring a project