RCWPM (Military M/D55342) Vishay Dale Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM FEATURES * Fully conforms to the requirements of MIL-PRF-55342 * Established reliability - verified failure rate; M, P, R, S and T levels * Construction is sulfur impervious against a high sulfur environment (ASTM B 809-95 test method) * 100 % group A screening per MIL-PRF-55342 * Termination style B - tin/lead wraparound over nickel barrier * Operating temperature range is - 55 C to + 150 C * For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale's RCWPM Jumper (Military M32159) datasheet * Halogen-free according to IEC 61249-2-21 definition MECHANICAL SPECIFICATIONS Resistive element Encapsulation Substrate Termination Solder finish Ruthenium oxide Epoxy 96 % alumina Solder-coated nickel barrier Tin/lead solder alloy STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL MIL MIL-PRF-55342 SPEC. TERM. STYLE SHEET CASE SIZE RCWPM-0502 RM0502 01 B 0502 RCWPM-550 RM0505 02 B 0505 RCWPM-5100 RM1005 03 B 1005 RCWPM-5150 RM1505 04 B 1505 RCWPM-7225 RM2208 05 B 2208 RCWPM-575 RM0705 06 B 0705 (3) RCWPM-1206 RM1206 07 B 1206 RCWPM-2010 RM2010 08 B 2010 RCWPM-2512 RM2512 09 B 2512 RCWPM-1100 RM1010 10 B 1010 RCWPM-0402 RM0402 11 B 0402 RCWPM-0603 RM0603 12 B 0603 RCWPM-0302 RM0302 13 B 0302 POWER MAX. TEMPERATURE RESISTANCE RATING WORKING TOLERANCE COEFFICIENT (2) RANGE P70 C VOLTAGE (1) % ppm/C W V 1 to 9.1 2, 5, 10 300 0.05 40 10 to 22M 1, 2, 5, 10 100, 300 1 to 9.1 2, 5, 10 300 0.125 40 10 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.20 75 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.15 125 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.225 175 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.15 50 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.25 100 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.80 150 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 1.0 200 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.50 75 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 9.1 2, 5, 10 300 0.05 30 10 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.10 50 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 9.1 2, 5, 10 300 0.04 15 10 to 22M 1, 2, 5, 10 100, 300 Notes * DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on this drawing as follows: RATING RES. RANGE RES. TOL. TEMP. COEF. MAX. WORKING DSCC DRAWING VISHAY DALE TERM. POWER VOLTAGE (1) P70 C % ppm/C NUMBER MODEL W V 10 to 46.4 1, 5 47 to 1M This drawing can be viewed at: www.dscc.dla.mil/Programs/MilSpec/listDwgs.asp?DocType=DSCCdwg. Continuous working voltage shall be P x R or maximum working voltage, whichever is less. Characteristics: K = 100 ppm/C; M = 300 ppm/C. MIL case size 0705 and EIA case size 0805 are dimensionally the same. 07009 (1) (2) (3) Document Number: 31010 Revision: 23-Feb-11 RCWP-0201 B 0.05 For technical questions, contact: ff2aresistors@vishay.com 200 100 30 www.vishay.com 1 RCWPM (Military M/D55342) Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342M02B10E0RWB (preferred part number format) M 5 MIL STYLE 5 3 4 SPEC. SHEET CHARACTERISTICS D55342 applies to Style 07 (RM1206) only. 2 M 0 TERMINATION STYLE 2 B 1 VALUE AND TOLERANCE E 0 FAILURE RATE (see Standard B = Pre-tinned (see Tolerance Electrical nickel barrier, and Multipliers Specifications wraparound table) table) K = 100 ppm M = 300 ppm 0 R W PACKAGING (1) C = Non-ER M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h T = Space level M55342 applies to all other styles. B SPECIAL TP = Tin/lead, Blank = Standard T/R (full) (Dash number) (Up to 1 digits) TN = Tin/lead, T/R (full), w/ESD T = Space level (-98) UL = Tin/lead, T/R single lot date code S3 = Tin/lead, T/R (1000 pieces) SV = Tin/lead, T/R (1000 pieces), w/ESD WB = Tin/lead, tray WA = Tin/lead, tray, w/ESD WL = Tin/lead, tray, single lot date code S2 = Tin/lead, T/R (500 pieces) SU = Tin/lead, T/R (500 pieces), w/ESD S6 = Tin/lead, T/R (300 pieces) ST = Tin/lead, T/R (300 pieces), w/ESD Historical Part Numbering: M55342M02B10E0R (will continue to be accepted) M55342 M 02 B 10E0 R WB MIL STYLE CHARACTERISTICS SPEC. SHEET TERMINATION STYLE VALUE AND TOLERANCE FAILURE RATE PACKAGING CODE Note (1) Products with space level failure rates are only offered in packaging codes with ESD overpack and labeling. For all other failure rates, the ESD pack codes are an optional type of packaging. RESISTANCE TOLERANCE AND MULTIPLIERS TOLERANCE MULTIPLIER VALUE RANGE () M 1 1 to 9xx K N 1000 1K to 9xxK L P 1 000 000 1M to 22M 1% 2% 5% 10 % D G J E H F T Examples: www.vishay.com 2 11D3 = 11.3 1 % 10E0 = 10 k 1 % 332D = 332 1 % 2F21 = 2.21 M 1 % 51G0 = 51 2 % 10H0 = 10 k 2 % 33H0 = 33 k 2 % 22T0 = 22 M 2 % 15J0 = 15 5 % 10K0 = 10 k 5 % 560K = 560 k 5 % 8L20 = 8.2 M 5 % 10M0 = 10 10 % 10N0 = 10 k 10 % 2P70 = 2.7 M 10 % 8P20 = 8.2 M 10 % For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010 Revision: 23-Feb-11 RCWPM (Military M/D55342) Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM Vishay Dale DIMENSIONS in inches (millimeters) D C B A E VISHAY DALE MODEL MIL-PRF-55342 STYLE MIL SPEC. SHEET A (LENGTH) B (WIDTH) C (HEIGHT) D (TOP TERM) E (BOTTOM TERM) RCWPM-0502 RM0502 01 0.055 0.005 (1.40 0.13) 0.023 0.003 (0.58 0.08) 0.015 0.003 (0.38 0.08) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) RCWPM-550 RM0505 02 0.055 0.005 (1.40 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) RCWPM-5100 RM1005 03 0.105 0.005 (2.67 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) RCWPM-5150 RM1505 04 0.155 0.005 (3.94 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) RCWPM-7225 RM2208 05 0.230 0.005 (5.84 0.13) 0.075 0.005 (1.91 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) RCWPM-575 RM0705 06 0.080 0.005 (2.03 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.016 0.008 (0.41 0.20) 0.015 0.005 (0.38 0.13) RCWPM-1206 RM1206 07 0.125 0.005 (3.18 0.13) 0.063 0.005 (1.60 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) RCWPM-2010 RM2010 08 0.197 0.006 (5.00 0.15) 0.098 0.005 (2.49 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) RCWPM-2512 RM2512 09 0.250 0.005 (6.35 0.13) 0.124 0.005 (3.15 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) RCWPM-1100 RM1010 10 0.105 0.005 (2.67 0.13) 0.100 0.005 (2.54 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) RCWPM-0402 RM0402 11 0.039 0.003 (0.99 0.08) 0.020 0.003 (0.51 0.08) 0.013 0.003 (0.33 0.08) 0.010 0.005 (0.25 0.13) 0.010 0.005 (0.25 0.13) RCWPM-0603 RM0603 12 0.063 0.005 (1.60 0.13) 0.032 0.005 (0.81 0.13) 0.018 0.005 (0.46 0.13) 0.012 0.005 (0.30 0.13) 0.015 0.005 (0.38 0.13) RCWPM-0302 RM0302 13 0.034 0.004 (0.86 0.10) 0.021 0.003 (0.53 0.08) 0.013 0.003 (0.33 0.08) 0.007 0.005 (0.18 0.13) 0.008 0.005 (0.20 0.13) 0.024 0.002 (0.61 0.05) 0.012 0.002 (0.30 0.05) 0.009 0.002 (0.23 0.05) 0.006 0.003 (0.15 0.08) 0.006 + 0.002 - 0.004 (0.15 + 0.05 - 0.10) RCWP-0201 Rated Power in % DERATING CURVE 120 100 80 CAGE CODE: 91637 and SH903 60 40 20 0 - 55 - 25 0 25 Document Number: 31010 Revision: 23-Feb-11 50 75 100 125 150 175 70 Ambient Temperature in C For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1