TOSHIBA TLGE160 TENTATIVE TOSHIBA LED LAMP InGaAP GREEN LIGHT EMISSION PANEL CIRCUIT INDICATOR Unit in mm e 3mm DIAMETER (T1-3/ 4) = e InGaAeP GREEN LED lg e = All Plastic Mold Type. 5 Colorless Clear Lens 2\+ @ Low Drive Current, High Intensity Green Light Emission be Recommended Forward Current : Ip=15~20mA (DC) & e =All Plastic Molded Lens, Provides an Excellent ON-OFF + Contrast Ratio. FE e Fast Response Time, Capable of Pulse Operation. = High Power Luminous Intensity , . 1. ANODE @ APPLICATIONS : Suitable for Outdoor Message Signboard, 2 CATHODE Safety equipment, etc. yer JEDEC EIAJ = MAXIMUM RATINGS (Ta = 25C) TOSHIBA 4-3E1A CHARACTERISTIC SYMBOL | RATING | uNrr | Weight : 031g Forward Current (DC) Ip 50 mA Reverse Voltage VR 4 Vv Power Dissipation Pp 140 mW Operating Temperature Range Topr 30~85 C Storage Temperature Range Tstg 40~120 C 961001EACI @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1999-02-16 1/3 TOSHIBA TLGE160 ELECTRO-OPTICAL CHARACTERISTICS (Ta = 25C) CHARACTERISTIC SYMBOL TEST CONDITION MIN. | TYP. | MAX. | UNIT Forward Voltage VE Ip=20mA 2.27| 2.8 Vv Reverse Current IR VR=4vV 50 | A Luminous Intensity Iy Ip=20mA (Note) 850 | 3000; | med Peak Emission Wavelength Ap Ip=20mA 574] nm Spectral Line Half Width AA Ip=20mA 11); nm Dominant Wavelength Ad Ip=20mA 571 | nm (Note) Rank selection carried out under next range respectively, although it needs +15% additionary for guaranteed limits. S : 1000-2000med, T : 1800-8600med, U : 3200-6400mcd. PRECAUTION Please be careful of the followings. @ Soldering temperature : 260C MAX. Soldering time : 3s MAX. (Soldering portion of lead : up to 2mm from the body of the device) forming stress to the resin. Soldering should be performed after lead forming. If the lead is formed, the lead should be formed up to 5mm from the body of the device without 1999-02-16 2/3 TOSHIBA IF VF Ta=25C FORWARD CURRENT Ip (mA) 1.6 1.8 2.0 2.2 2.4 2.6 2.8 FORWARD VOLTAGE Vp () Iy - Te RELATIVE LUMINOUS INTENSITY Iy 20 0 20 40 60 80 CASE TEMPERATURE Te (C) RADIATION PATTERN Ta=25C 40 40 50 CS SAIPAN ZS MIE ZX 70 LEE MESES RELATIVE LUMINOUS INTENSITY LUMINOUS INTENSITY Iy (mcd) ALLOWABLE FORWARD CURRENT Ip (mA) TLGE160 Iy IF 10000 5000) Ta=25C 3000 1000 500 300 100 50 30 10 1 3 5 10 30050 100 FORWARD CURRENT Ip (mA) RELATIVE LUMINOUS INTENSITY A Ip=20mA Ta=25C 520 540 560 580 600 620 640 WAVE LENGTH A (nm) Ip Ta 0 20 40 60 80 100 AMBIENT TEMPERATURE Ta (C) 1999-02-16 3/3