CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1213A-04SO has been designed to provide ESD protection for electronic components or subsystems requiring minimal capacitive loading. This device is ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. A Zener diode is embedded between VP and VN, offering two advantages. First, it protects the VCC rail against ESD strikes, and second, it eliminates the need for a bypass capacitor that would otherwise be needed for absorbing positive ESD strikes to ground. This device will protect against ESD pulses up to 8 kV per the IEC 61000-4-2 standard. This device is particularly well-suited for protecting systems using high-speed ports such as USB 2.0, IEEE1394 (Firewire(R), iLinkt), Serial ATA, DVI, HDMI and corresponding ports in removable storage, digital camcorders, DVD-RW drives and other applications where extremely low loading capacitance with ESD protection are required in a small package footprint. www.onsemi.com SC-74 SO SUFFIX CASE 318F MARKING DIAGRAM VP CH1 CH2 CH3 CH4 VN CM1213A-04SO Features * Four Channels of ESD Protection * Provides ESD Protection to IEC61000-4-2 Level 4 * * * * * * * MARKING DIAGRAM 8 kV Contact Discharge Low Channel Input Capacitance of 0.85 pF Typical Minimal Capacitance Change with Temperature and Voltage Channel Input Capacitance Matching of 0.02 pF Typical is Ideal for Differential Dignals Zener Diode Protects Supply Rail and Eliminates the Need for External By-pass Capacitors Each I/O Pin Can Withstand Over 1000 ESD Strikes* SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free and RoHS Compliant Applications * USB2.0 Ports at 480 Mbps in Desktop PCs, Notebooks and Peripherals * IEEE1394 Firewire(R) Ports at 400 Mbps/800 Mbps * DVI Ports, HDMI Ports in Notebooks, Set Top Boxes, Digital TVs, LCD Displays * Serial ATA Ports in Desktop PCs and Hard Disk Drives * PCI Express Ports * General Purpose High-Speed Data Line ESD Protection 234MG G 1 234 M G = Specific Device Code = Date Code = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device Package Shipping CM1213A-04SO SC-74 (Pb-Free) 3,000 / Tape & Reel SZCM1213A-04SO SC-74 (Pb-Free) 3,000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. *Standard test condition is IEC61000-4-2 level 4 test circuit with each pin subjected to 8 kV contact discharge for 1000 pulses. Discharges are timed at 1 second intervals and all 1000 strikes are completed in one continuous test run. The part is then subjected to standard production test to verify that all of the tested parameters are within spec after the 1000 strikes. (c) Semiconductor Components Industries, LLC, 2014 February, 2018 - Rev. 2 1 Publication Order Number: CM1213A-04SO/D CM1213A-04SO, SZCM1213A-04SO PACKAGE/PINOUT DIAGRAMS Table 1. PIN DESCRIPTIONS Pin Name Type 1 CH1 I/O Description Top View ESD Channel Negative Voltage Supply Rail CH1 1 VN GND 3 CH2 I/O ESD Channel VN 2 4 CH3 I/O ESD Channel CH2 3 5 VP PWR 6 CH4 I/O Positive Voltage Supply Rail 234 2 6 CH4 5 VP 4 CH3 6-Lead SC-74 ESD Channel SPECIFICATIONS Table 2. ABSOLUTE MAXIMUM RATINGS Parameter Rating Units 6.0 V Operating Temperature Range -40 to +85 C Storage Temperature Range -65 to +150 C (VN - 0.5) to (VP + 0.5) V Operating Supply Voltage (VP - VN) DC Voltage at any channel input Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Table 3. STANDARD OPERATING CONDITIONS Parameter Operating Temperature Range Package Power Rating Rating Units -40 to +85 C 225 mW Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 1) Symbol Parameter Conditions Min Typ Max Units 3.3 5.5 V 8.0 mA VP Operating Supply Voltage (VP-VN) IP Operating Supply Current (VP-VN) = 3.3 V VF Diode Forward Voltage IF = 8 mA; TA = 25C 0.90 Channel Leakage Current TA = 25C; VP = 5 V, VN = 0 V 0.1 Channel Input Capacitance At 1 MHz, VIN = 0 V (Note 2) ILEAK CIN DCIO Channel I/O ti I/O Capacitance ESD ESD Protection IEC 61000-4-2 Contact IEC 61000-4-2 Air ISO 10605 330 pF/330 W Contact TA = 25C (Note 3) VCL Channel Clamp Voltage Positive Transients Negative Transients TA = 25C, IPP = 1A, tP = 8/20 mS (Note 2) Dynamic Resistance Positive Transients Negative Transients TA = 25C, IPP = 1A, tP = 8/20 mS (Note 2) RDYN 1.5 V 1.0 mA 2.0 pF pF kV 8 8 8 V +9.9 -1.6 W 0.96 0.5 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. All parameters specified at TA = -40C to +85C unless otherwise noted. 2. VP = 3.3 V, VN grounded. 3. These measurements performed with no external capacitor on VP (VP floating). www.onsemi.com 2 CM1213A-04SO, SZCM1213A-04SO PERFORMANCE INFORMATION Input Channel Capacitance Performance Curves Figure 1. Typical Variation of CIN vs. VIN (f = 1 MHz, VP = 3.3 V, VN = 0 V, 0.1 F Chip Capacitor between VP and VN, 255C) Figure 2. Typical Variation of CIN vs. Temp (f = 1 MHz, VIN = 30 mV, VP = 3.3 V, VN = 0 V, 0.1 F Chip Capacitor between VP and VN) www.onsemi.com 3 CM1213A-04SO, SZCM1213A-04SO PERFORMANCE INFORMATION (Cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 50 Ohm Environment) Figure 3. Insertion Loss (S21) vs. Frequency (0 V DC Bias, VP=3.3 V) Figure 4. Insertion Loss (S21) vs. Frequency (2.5 V DC Bias, VP=3.3 V) www.onsemi.com 4 CM1213A-04SO, SZCM1213A-04SO APPLICATION INFORMATION Design Considerations In order to realize the maximum protection against ESD pulses, care must be taken in the PCB layout to minimize parasitic series inductances on the Supply/Ground rails as well as the signal trace segment between the signal input (typically a connector) and the ESD protection device. Refer to Application of Positive ESD Pulse between Input Channel and Ground, which illustrates an example of a positive ESD pulse striking an input channel. The parasitic series inductance back to the power supply is represented by L1 and L2. The voltage VCL on the line being protected is: VCL = Fwd Voltage Drop of D1 + VSUPPLY + L1 x d(IESD) / dt + L2 x d(IESD) / dt where IESD is the ESD current pulse, and VSUPPLY is the positive supply voltage. An ESD current pulse can rise from zero to its peak value in a very short time. As an example, a level 4 contact discharge per the IEC61000-4-2 standard results in a current pulse that rises from zero to 30 Amps in 1 ns. Here d(IESD)/dt can be approximated by DIESD/Dt, or 30/(1x10-9). So just 10 nH of series inductance (L1 and L2 combined) will lead to a 300 V increment in VCL! Similarly for negative ESD pulses, parasitic series inductance from the VN pin to the ground rail will lead to drastically increased negative voltage on the line being protected. The CM1213A has an integrated Zener diode between VP and VN. This greatly reduces the effect of supply rail inductance L2 on VCL by clamping VP at the breakdown voltage of the Zener diode. However, for the lowest possible VCL, especially when VP is biased at a voltage significantly below the Zener breakdown voltage, it is recommended that a 0.22 mF ceramic chip capacitor be connected between VP and the ground plane. As a general rule, the ESD Protection Array should be located as close as possible to the point of entry of expected electrostatic discharges. The power supply bypass capacitor mentioned above should be as close to the VP pin of the Protection Array as possible, with minimum PCB trace lengths to the power supply, ground planes and between the signal input and the ESD device to minimize stray series inductance. Additional Information See also ON Semiconductor Application Note "Design Considerations for ESD Protection", in the Applications section. L2 POSITIVE SUPPLY RAIL VP CCCCCC CCCCCC CCCCCC CCCCCC CCCCCC CCCCCC D1 0.22 mF ONE CHANNEL D2 OF CM1213 VN VCC PATH OF ESD CURRENT PULSE IESO LINE BEING PROTECTED L1 0A SYSTEM OR CIRCUITRY BEING PROTECTED CHANNEL INPUT 25 A CCCCCC CCCCCC CCCCCC CCCCCC CCCCCC VCL GROUND RAIL CHASSIS GROUND Figure 5. Application of Positive ESD Pulse between Input Channel and Ground www.onsemi.com 5 CM1213A-04SO, SZCM1213A-04SO PACKAGE DIMENSIONS SC-74 CASE 318F-05 ISSUE N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318F-01, -02, -03, -04 OBSOLETE. NEW STANDARD 318F-05. D 6 5 4 2 3 E HE 1 DIM A A1 b c D E e L HE b e 0.05 (0.002) C A L A1 MIN 0.90 0.01 0.25 0.10 2.90 1.30 0.85 0.20 2.50 0 MILLIMETERS NOM MAX 1.00 1.10 0.06 0.10 0.37 0.50 0.18 0.26 3.00 3.10 1.50 1.70 0.95 1.05 0.40 0.60 2.75 3.00 - 10 MIN 0.035 0.001 0.010 0.004 0.114 0.051 0.034 0.008 0.099 0 INCHES NOM 0.039 0.002 0.015 0.007 0.118 0.059 0.037 0.016 0.108 - MAX 0.043 0.004 0.020 0.010 0.122 0.067 0.041 0.024 0.118 10 SOLDERING FOOTPRINT* 2.4 0.094 0.95 0.037 1.9 0.074 0.95 0.037 0.7 0.028 1.0 0.039 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. FireWire is a registered trademark of Apple Computer, Inc. iLink is a trademark of S. J. Electro Systems, Inc. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative CM1213A-04SO/D