MEMS Flow Rate Sensor D6F-W@A1 A Compact Sensor That Uses OMRON's Unique Flow Path Structure for Highperformance Flow Rate Measurement. Anti-dust performance enhanced by OMRON's unique three-dimensional flow path structure. High accuracy of 5% FS. RoHS Compliant Ordering Information Absolute Maximum Ratings Sensor Flow rate Model number 0 to 1 m/s D6F-W01A1 0 to 4 m/s D6F-W04A1 Minimum order 25 Cable (Order Separately) Contact SZH-002T-P0.5 Wires AWG 26 (Length 200 mm) Housing ZHR-3 Model number Item Symbol Rating Unit Power supply voltage Vcc 26.4 VDC Output voltage Vout 6 VDC D6F-W CABLE Connections Performance 2. Vout. 3. GND. 1. Vcc. Item Model number Flow rate D6F-W01A1 0 to 1 m/s D6F-W04A1 0 to 4 m/s This is the flow rate at 25C and 1 atmosphere. Case material Operating conditions Enlarged view Thermoplastic resin Pin No. 1: Vcc 2: Vout 3: GND Connectors S3B-ZR-SM2-TF (Made by J.S.T. Mfg. Co., Ltd.) Applicable fluid Air Operating temperature -10 to 60C (with no condensation or icing) Operating humidity 85% max. (with no condensation or icing) Storage temperature -40 to 80C (with no condensation or icing) Use the following connectors from J.S.T. Mfg. Co., Ltd. to connect the D6F. Storage humidity 85% max. (with no condensation or icing) Contacts and Wires Contacts: SZH-002T-P 0.5 Power supply voltage 10.8 to 26.4 VDC Wires: AWG28 to AWG26 Output signal Analog output: 1 to 5 VDC, Load resistance: 10 k (non-linear output) or Contacts: SZH-003T-P 0.5 Current consumption Without load: Vcc = 12 to 24 VDC, Vss = 0 V, 25 C, 15 mA max. Wires: AWG32 to AWG28 Housing: ZHR-3 Insulation resistance Between Sensor outer cover and lead terminals: 20 M min. (at 500 VDC) Withstand voltage Between Sensor outer cover and lead terminals: 500 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) Note: The flow rate is the value calculated from the mass flow rate in OMRON's specified 48-mm-dia. wind tunnel. It does not indicate the flow rate determined by the Measurement Law of Japan. Confirm operation in the application environment before using the D6F. 1 D6F-W@A1 D6F-W@A1 Dimensions (Unit: mm) Sensor D6F-W01A1 D6F-W04A1 9 3.20.2 20 1.2 2.6 8 Two, R: 1.6 2.6 1.2 R: 4 Two, M3 screws 8 4.20.2 IN OUT 30.50.05 5 39 24 5 30.50.2 19.5 OUT 4 2-dia. holes, Depth: 2.5 3.2 0.2 dia. 7 R: 4 Cable (Order Separately) D6F-W CABLE 51 153 3010 10010 5010 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A184-E1-01 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Electronic Components Company Semiconductor Division H.Q. Micro Devices Division 686-1 Ichimiyake, Yasu, Shiga, 520-2326 JAPAN Tel: (81)77-587-7486/Fax: (81)77-587-7503 Printed in Japan 0109