NEW PRODUCT UPDATE NEW PRODUCT UPDATE NEW PRODUCT UPDATE NEW PRODUCT UPDATE MMCX REVERSE POLARITY reverse polarity MMCX connectors meet the same high quality requirements as the standard Amphenol MMCX products. The product line consists of straight and right angle plugs for various miniature flexible cables including .085 semi-rigid cable. The RP-MMCX line also includes edgecard plugs and jacks ideally suited for PCMCIA cards. Applications: * PCMCIA Cards MMCX Reverse Polarity Micromate Connectors A mphenol introduces new 50 Ohm reverse polarity MMCX connector series. These micromate snap-on connectors provide excellent RF performance for applications up to 6 GHz. These microminiature connectors are designed for use in spread spectrum wireless applications when a non-standard interface has been mandated to comply with the requirements of FCC regulation part 15, section 15.203. These Features * Wireless Applications * Antennas * Wireless LANs * Broadband Communications * Instrumentation * RF Test Ports * Cellular Telephones * Global Positioning Systems (GPS) * Base Stations * Radio Boards * Satellite Reception Terminals Benefits Broadband performance with low reflection DC to 6 GHZ Non-standard interface Capable of 500+ mating cycles Edgecard connectors available in single or tape & reel pkg. Right angle plug has a one-piece body construction Low cost combined with high quality Complies with FCC regulation part 15 sec. 15.203 Machined components provide durability vs. stamped components Tape & reel allows automated placement Provides low cost solution with improved electrical performance AMPHENOL RF - GLOBAL RF SOLUTIONS MMCX REVERSE POLARIT CONNECTORS Y Specifications: Electrical: Environmental: CECC22000 Impedance Frequency Range VSWR Test Requirement 50 DC thru 6 GHz 4.4.1 SMT and Edgecard (Mated Pair) DC-4 GHz 4-6 GHz Temperature Range Temperature Shock Humidity Vibration 1.15 Max 1.40 Max Mechanical Shock Cabled Straight, Semi-rigid Straight, Flex Rt. Angle, Semi-rigid Rt. Angle, Flex 1.15 Max 1.20 Max 1.20 Max 1.25 Max Dielectric Withstanding 4.4.5 Voltage (at sea level) Working Voltage (at sea level) 4.4.4 500 VRMS, 50 Hz Insulation Resistance 4.4.4 500M 4.4.2 4.4.3 10M 5M 170 VRMS, 50 Hz CECC22000 Test Requirement -55C through 155C 4.6.7 MIL-STD-202 method 107 4.6.6 MIL-STD-202 method 103 Condition B 4.6.3 3 cycles, 3 opposite directions 10-150 Hz, 10-60 Hz: 0.75mm/.030.0 in., 60-150 Hz 10G's 4.6.4 MIL-STD-202 method 213, Condition B Mechanical: Engagement Force Disengagement Force Contact captivation Durability (machined) CECC22000 4.5.4 4.5.4 4.5.2 4.7.1 Test Requirement 3.4 lbs. 1.4 lbs. to 3.4 lbs. 2.3 lbs. 500 cycles. Contact Resistance Center Conductor Outer Conductor Ordering Information: Part No. 908-21100-RP Cable Size n/a Description Edgecard Plug 908-21102-RP n/a Edgecard Plug, Offset 908-22100-RP n/a Edgecard Jack 908-22103-RP n/a Edgecard Jack, Offset 908-41200-RP RG 178,196 Straight Plug 908-41300-RP RG 174,188,316 Straight Plug 908-41400-RP RG 405 (.086) Straight Plug 908-41500-RP RD-316 Straight Plug 908-43200-RP RG 178,196 Right Angle Plug 908-43300-RP RG 174,188,316 Right Angle Plug 908-43400-RP RG 405 (.086) Right Angle Plug 908-43500-RP RD-316 Right Angle Plug Material: Connector Part Male contact Female contact Outer Conductor Insulator Standards QQ-C-530 QQ-C-530 QQ-C-530 ASTM-D1457 Material Brass BeCu Brass PTFE Plating Gold Gold Gold -- MMCX Reverse Polarity Interface Specifications Plug Jack One Kennedy Avenue Danbury, Connecticut 06810 Telephone: (203) 743-9272 Fax: (203) 796-2032 www.amphenolrf.com AMPHENOL RF - GLOBAL RF SOLUTIONS