RFM products are now
Murata products.
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 1 of 10 www.murata.com
Electrical Characteristics
Electrical Connections
Characteristic Sym Notes Min Typ Max Units
Center Frequency fC390.0 MHz
1 dB Bandwidth BW116.0 MHz
Maximum Insertion Loss, 383.1 to 396.9 MHz ILMAX 1.4 2.4
dB
Amplitude Ripple, p-p, 383.1 to 396.9 MHz 1.0
Rejection Referenced to Insertion Loss at 390.0 MHz:
DC to 370 MHz 32 35
400 to 490 MHz 32 35
490 to 890 MHz 42 45
890 to 1390 MHz 63 66
1390 to 1790 MHz 55 58
1790 to 2000 MHz 53 56
Source Impedance ZS50
Balanced Load Impedance ZL150
Case Style SM3838-8 3.8 x 3.8 mm Nominal Footprint
Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 889, YWWS
Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel
Reel Size 13 Inch 3000 Pieces/Reel
Connection Terminals
Single-ended Port 6
Balanced Port 1, 3
Case Ground 4, 5, 7, 8
No Connection 2
• 383.1 to 396.9 MHz Filter
• Optimized for use with the TRC105 Transceiver
• Balanced 150 ohm IC Interface
• Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating Value Units
Input Power Level +15 dBm
DC Voltage ±5 V
Operating Temperature Range -40 to +85 °C
Storage Temperature Range in Tape and Reel -40 to +85 °C
390 MHz
SAW Filter
RF3606D
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external
impedance matching design. See Application Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter are subject to change.
5. US and international patents may apply.
6. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd.
Pb
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
NOTES:
SM3838-8
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 2 of 10 www.murata.com
5
6
781
3
2
R F 3 6 0 6 D
50 ohm
Antenna
T R C 1 0 5
3 1
3 2
0 . 0 4 7 µ F
V D D _ P A
R F 3 6 0 6 D - T R C 1 0 5 A p p l i c a t i o n C i r c u i t
4
47 nH
4 7 n H
F a i r - R i t e
2506031217YO bead
220 nH
68 nH
470 pF
5
6
781
3
2
R F 3 6 0 6 D
50 ohm
R F 3 6 0 6 D 5 0 O h m T u n i n g N e t w o r k
36 nH
450 ohm
36 nH
7 p F
9 p F
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 3 of 10 www.murata.com
RF3606D Broadband Response, 200 to 2000 MHz
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 4 of 10 www.murata.com
RF3606D Response, 290 to 490 MHz
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 5 of 10 www.murata.com
RF3606D Response, 340 to 440 MHz
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 6 of 10 www.murata.com
RF3606D Passband Response
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 7 of 10 www.murata.com
RF3606D Input Impedance Plot
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 8 of 10 www.murata.com
RF3606D Balanced Output Impedance Plot
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 9 of 10 www.murata.com
Case Dimensions
Dimension mm Inches
Min Nom Max Min Nom Max
A3.6 3.8 4.0 0.142 0.150 0.157
B3.6 3.8 4.0 0.142 0.150 0.157
C0.90 1.00 1.1 0.035 0.040 0.043
D0.80 0.90 1.0 0.031 0.035 0.040
E0.90 1.00 1.10 0.035 0.040 0.043
F0.50 0.60 0.70 0.020 0.024 0.028
G2.39 2.54 2.69 0.090 0.100 0.110
H1.40 1.75 2.05 0.055 0.069 0.080
Materials
Solder Pad
Plating 0.3 to 1.0 μm Gold over 1.27 to 8.89 μm Nickel
Lid Plating 2.0 to 3.0 μm Nickel
Body Al2O3 Ceramic
Pb Free
8-Terminal Ceramic Surface-Mount Case
3.8 X 3.8 mm Nominal Footprint
TOP VIEW BOTTOM VIEW
PCB Footprint
889
YWWS
©2010-2015 by Murata Electronics N.A., Inc.
RF3606D (R) 6/2/15 Page 10 of 10 www.murata.com
Tape and Reel Specifications
“B “
Nominal Size Quantity Per Reel
Inches millimeters
7 178 500
13 330 3000
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao 4.25 mm
Bo 4.25 mm
Ko 1.30 mm
Pitch 8.0 mm
W 12.0 mm
PIN #1
USER DIRECTION OF FEED
