Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FDG6332C_F085 20V N & P-Channel PowerTrench MOSFETs General Description Features * Q1 0.7 A, 20V. The N & P-Channel MOSFETs are produced using Fairchild Semiconductor's advanced PowerTrench process that has been especially tailored to minimize on-state resistance and yet maintain superior switching performance. RDS(ON) = 300 m @ VGS = 4.5 V RDS(ON) = 400 m @ VGS = 2.5 V * Q2 -0.6 A, -20V. RDS(ON) = 420 m @ VGS = -4.5 V RDS(ON) = 630 m @ VGS = -2.5 V These devices have been designed to offer exceptional power dissipation in a very small footprint for applications where the bigger more expensive TSSOP-8 and SSOP-6 packages are impractical. * Low gate charge * High performance trench technology for extremely Applications low RDS(ON) * DC/DC converter * SC70-6 package: small footprint (51% smaller than * Load switch SSOT-6); low profile (1mm thick) * LCD display inverter * Qualified to AEC Q101 * RoHS Compliant S G D D 1 6 2 5 3 4 G Pin 1 S SC70-6 Absolute Maximum Ratings Symbol Complementary o TA=25 C unless otherwise noted Q1 Q2 VDSS Drain-Source Voltage Parameter 20 -20 V VGSS Gate-Source Voltage 12 12 V ID Drain Current 0.7 -0.6 A PD Power Dissipation for Single Operation TJ, TSTG Operating and Storage Junction Temperature Range - Continuous (Note 1) - Pulsed 2.1 (Note 1) Units -2 0.3 W -55 to +150 C 415 C/W Thermal Characteristics RJA Thermal Resistance, Junction-to-Ambient (Note 1) Package Marking and Ordering Information Device Marking Device Reel Size Tape width Quantity .32 FDG6332C_F085 7'' 8mm 3000 units 2009 Fairchild Semiconductor Corporation FDG6332C_F085 Rev C2 (W) FDG6332C_F085 20V N & P-Channel PowerTrench MOSFETs March 2009 Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Source Breakdown Voltage BVDSS TJ Breakdown Voltage Temperature Coefficient IDSS Zero Gate Voltage Drain Current IGSSF /IGSSR Gate-Body Leakage, Forward IGSSF /IGSSR Gate-Body Leakage, Reverse On Characteristics ID = 250 A VGS = 0 V, VGS = 0 V, ID = -250 A ID = 250 A,Ref. to 25C ID = -250 A,Ref. to 25C VDS = 16 V, VGS = 0 V VDS = -16 V, VGS = 0 V VGS = 12 V, VDS = 0 V VGS = 12V , VDS = 0 V Q1 Q2 Q1 Q2 Q1 Q2 20 -20 V 14 -14 mV/C 1 -1 100 100 A V (Note 2) Gate Threshold Voltage Q1 VDS = VGS, ID = 250 A 0.6 1.1 1.5 VDS = VGS, ID = -250 A -0.6 -1.5 VGS(th) TJ Gate Threshold Voltage Temperature Coefficient Q2 Q1 Q2 RDS(on) Static Drain-Source On-Resistance VGS(th) gFS ID(on) nA nA Q2 VGS = -4.5 V, ID = -0.6 A VGS = -2.5 V, ID = -0.5 A VGS=-4.5 V, ID =-0.6 A,TJ=125C -1.2 -2.8 3 180 293 247 300 470 400 Q1 VDS = 5 V ID = 0.7 A 2.8 Q2 VDS = -5 V ID = -0.6A 1.8 Q1 VGS = 4.5 V, VDS = 5 V Q2 VGS = -4.5 V, VDS = -5 V Q1 VDS=10 V, V GS= 0 V, f=1.0MHz 113 Q2 VDS=-10 V, V GS= 0 V, f=1.0MHz 114 Q1 VDS=10 V, V GS= 0 V, f=1.0MHz 34 Q2 VDS=-10 V, V GS= 0 V, f=1.0MHz 24 VDS=10 V, V GS= 0 V, f=1.0MHz 16 Q2 VDS=-10 V, V GS= 0 V, f=1.0MHz 9 Q1 For Q1: VDS =10 V, VGS= 4.5 V, Q1 Forward Transconductance On-State Drain Current ID = 250 A,Ref. To 25C ID = -250 A,Ref. to 25C VGS = 4.5 V, ID =0.7 A VGS = 2.5 V, ID =0.6 A VGS = 4.5 V, ID =0.7A,TJ=125C mV/C 300 400 442 m 420 630 700 S A 1 -2 Dynamic Characteristics Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance Q1 Switching Characteristics td(on) Turn-On Delay Time td(off) Turn-On Rise Time Q1 Turn-Off Delay Time Q2 Q1 Q2 tf Qg Qgs Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge pF I D= 1 A RGEN = 6 For Q2: VDS =-10 V, I D= -1 A VGS= -4.5 V, RGEN = 6 5 10 5.5 11 7 14 15 25 ns 9 18 ns 6 12 ns Q1 1.5 3 ns Q2 1.7 1.1 3.4 1.5 nC 1.4 2 Q1 Q2 Q1 Q2 Qgd pF (Note 2) Q2 tr pF Q1 Q2 For Q1: VDS =10 V, VGS= 4.5 V, For Q2: VDS =-10 V, VGS= -4.5 V, I D= 0.7 A RGEN = 6 I D= -0.6 A RGEN = 6 0.24 nC 0.3 0.3 0.4 nC FDG6332C_F085 Rev C2 (W) FDG6332C_F085 20V N & P-Channel PowerTrench MOSFETs Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units Drain-Source Diode Characteristics and Maximum Ratings IS VSD Maximum Continuous Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage Q1 0.25 Q2 -0.25 Q1 VGS = 0 V, IS = 0.25 A (Note 2) 0.74 1.2 Q2 VGS = 0 V, IS = -0.25 A (Note 2) -0.77 -1.2 A V Notes: 1. RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RJA is determined by the user's board design. RJA = 415C/W when mounted on a minimum pad of FR-4 PCB in a still air environment. 2. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% FDG6332C_F085 Rev C2 (W) FDG6332C_F085 20V N & P-Channel PowerTrench MOSFETs Electrical Characteristics 1.8 4 3.0V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE ID, DRAIN CURRENT (A) VGS=4.5V 3.5V 2.5V 3 2 2.0V 1 1.6 VGS = 2.5V 1.4 3.0V 1.2 3.5V 4.0V 0.8 0 0 1 2 3 0 4 1 Figure 1. On-Region Characteristics. 3 4 Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 0.8 1.6 ID =0.7A VGS = 4.5V RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 2 I D, DRAIN CURRENT (A) VDS, DRAIN-SOURCE VOLTAGE (V) 1.4 1.2 1 0.8 ID =0.4A 0.6 TA = 125oC 0.4 o TA = 25 C 0.2 0 0.6 -50 -25 0 25 50 75 100 125 1 150 2 3 4 5 VGS , GATE TO SOURCE VOLTAGE (V) TJ, JUNCTION TEMPERATURE (oC) Figure 3. On-Resistance Variation with Temperature. Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 10 2.5 2 VGS = 0V 25oC IS, REVERSE DRAIN CURRENT (A) o TA = -55 C VDS = 5V I D, DRAIN CURRENT (A) 4.5V 1 125oC 1.5 1 0.5 1 TA = 125oC 25 oC 0.1 -55oC 0.01 0.001 0.0001 0 0.5 1 1.5 2 2.5 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. 3 0 0.2 0.4 0.6 0.8 1 1.2 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDG6332C_F085 Rev C2 (W) FDG6332C_F085 20V N & P-Channel PowerTrench MOSFETs Typical Characteristics: N-Channel 200 VDS = 5V ID = 0.7A f = 1MHz VGS = 0 V 10V 4 15V CAPACITANCE (pF) VGS, GATE-SOURCE VOLTAGE (V) 5 3 2 150 CISS 100 COSS 50 1 CRSS 0 0 0 0.4 0.8 1.2 0 1.6 Figure 7. Gate Charge Characteristics. 10 15 20 Figure 8. Capacitance Characteristics. 10 10 RDS(ON) LIMIT P(pk), PEAK TRANSIENT POWER (W) ID, DRAIN CURRENT (A) 5 VDS, DRAIN TO SOURCE VOLTAGE (V) Qg , GATE CHARGE (nC) 100s 1ms 1 10ms 100ms 1s VGS = 4.5V SINGLE PULSE RJA = 415oC/W 0.1 DC TA = 25oC 0.01 0.1 1 10 VDS, DRAIN-SOURCE VOLTAGE (V) Figure 9. Maximum Safe Operating Area. 100 SINGLE PULSE RJA = 415C/W TA = 25C 8 6 4 2 0 0.001 0.01 0.1 1 10 100 t 1, TIME (sec) Figure 10. Single Pulse Maximum Power Dissipation. FDG6332C_F085 Rev C2 (W) FDG6332C_F085 20V N & P-Channel PowerTrench MOSFETs Typical Characteristics: N-Channel 2 1.8 VGS = -4.5V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE -3.0V -ID, DRAIN CURRENT (A) -3.5V 1.6 -2.5V 1.2 0.8 -2.0V 0.4 VGS = -2.5V 1.6 1.4 -3.0V 1.2 -3.5V -4.0V -4.5V 1 0.8 0 0 1 2 3 0 4 0.5 Figure 11. On-Region Characteristics. 2 1.2 ID = -0.6A VGS = -4.5V 1.3 RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 1.5 Figure 12. On-Resistance Variation with Drain Current and Gate Voltage. 1.4 1.2 1.1 1 0.9 0.8 ID = -0.3 A 1 0.8 o TA = 125 C 0.6 TA = 25o C 0.4 0.2 0.7 -50 -25 0 25 50 75 100 125 1 150 2 3 4 5 -VGS, GATE TO SOURCE VOLTAGE (V) o TJ, JUNCTION TEMPERATURE ( C) Figure 13. On-Resistance Variation with Temperature. Figure 14. On-Resistance Variation with Gate-to-Source Voltage. 10 2 TA = -55 oC VGS = 0V 25oC -IS, REVERSE DRAIN CURRENT (A) VDS = -5V o -ID, DRAIN CURRENT (A) 1 -ID, DRAIN CURRENT (A) -VDS, DRAIN-SOURCE VOLTAGE (V) 125 C 1.5 1 0.5 1 o TA = 125 C 0.1 o 25 C 0.01 -55oC 0.001 0.0001 0 0.5 1 1.5 2 2.5 -VGS, GATE TO SOURCE VOLTAGE (V) Figure 15. Transfer Characteristics. 3 0 0.2 0.4 0.6 0.8 1 1.2 -VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 16. Body Diode Forward Voltage Variation with Source Current and Temperature. FDG6332C_F085 Rev C2 (W) FDG6332C_F085 20V N & P-Channel PowerTrench MOSFETs Typical Characteristics: P-Channel 160 ID = -0.6A VDS = -5V f = 1MHz VGS = 0 V -10V 4 -15V CAPACITANCE (pF) -VGS, GATE-SOURCE VOLTAGE (V) 5 3 2 120 CISS 80 COSS 40 1 CRSS 0 0 0 0.3 0.6 0.9 1.2 1.5 0 1.8 5 Figure 17. Gate Charge Characteristics. 15 20 Figure 18. Capacitance Characteristics. 10 10 100s RDS(ON) LIMIT 10ms 100ms 1s VGS = -4.5V SINGLE PULSE RJA = 415 oC/W DC 6 4 2 TA = 25oC 0.01 0.1 o TA = 25 C 1ms 1 0.1 SINGLE PULSE o RJA = 415 C/W 8 POWER (W) -ID, DRAIN CURRENT (A) 10 -V DS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) 1 10 -VDS, DRAIN-SOURCE VOLTAGE (V) 0 0.001 100 0.01 0.1 1 10 100 SINGLE PULSE TIME (SEC) Figure 19. Maximum Safe Operating Area. Figure 20. Single Pulse Maximum Power Dissipation. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 1 D = 0.5 RJA(t) = r(t) * RJA RJA = 415 C/W 0.2 0.1 0.1 P(pk) 0.05 t1 0.02 t2 0.01 TJ - TA = P * RJA(t) Duty Cycle, D = t1 / t2 0.01 SINGLE PULSE 0.001 0.0001 0.001 0.01 0.1 1 10 100 t1, TIME (sec) Figure 21. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1. Transient thermal response will change depending on the circuit board design. FDG6332C_F085 Rev C2 (W) FDG6332C_F085 20V N & P-Channel PowerTrench MOSFETs Typical Characteristics: P-Channel ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com