UPR1E102MHH - NICHICON - Datasheet.Directory

517D

www.vishay.com Vishay Sprague

Revision: 08-Oct-13 1Document Number: 42053

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Aluminum Capacitors

+ 105 °C, General Purpose Miniature, Radial Lead

FEATURES

• High CV per case size

•Low cost

• Solvent resistant construction

(through 100 WVDC)

• Life test to 2000 h at + 105 °C

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

QUICK REFERENCE DATA

DESCRIPTION VALUE

Nominal case size 

Ø D x L in mm

0.197" x 0.433" [5.0 x 11.0]

to 0.709" x 1.575" [18.0 x 40.0]

Operating temperature

- 55 °C to + 105 °C

(6.3 WVDC to 100 WVDC)

- 40 °C to + 105 °C

(160 WVDC to 250 WVDC)

Rated capacitance range, CR0.47 μF to 15 000 μF

Tolerance on CR± 20 %

Rated voltage range, UR6.3 WVDC to 250 WVDC

Termination 2 radial leads

Life validation test at 105 °C

2000 h:  CAP ± 20 % from

initial measurement.

 DF 2 x initial specified limit.

 DCL  initial specified limit.

Shelf life at 105 °C

1000 h:  CAP ± 20 % from initial

measurement.

 DF 2 x initial specified limit.

 DCL  initial specified limit.

DC leakage current

Rated voltage for 1 min for

6.3 WVDC to 100 WVDC units:

I < 0.03 CV or 4 μA

(whichever is greater).

Rated voltage for 2 min for

6.3 WVDC to 100 WVDC units:

I < 0.04 CV or 3 μA

(whichever is greater).

Rated voltage for 1 min for

160 WVDC to 250 WVDC units:

I < 0.1 CV + 40 μA and CV > 1000;

I < 0.04 CV + 100 μA

and CV > 1000

RIPPLE CURRENT MULTIPLIERS

TEMPERATURE

AMBIENT TEMPERATURE MULTIPLIERS

+ 70 °C 1.78

+ 85 °C 1.4

+ 105 °C 1.0

FREQUENCY (Hz)

WVDC CAP. (μF) 50 to

100 to

120

300 to

400 1 kHz  10 kHz

6.3 to

100

0 to 47 0.75 1 1.35 1.57 2.00

100 to 470 0.80 1 1.23 1.34 1.50

1000 to

22 000 000 0.85 1 1.10 1.13 1.15

160 to

250 0.47 to 100 0.80 1 1.25 1.40 1.60

LOW TEMPERATURE PERFORMANCE

MAXIMUM IMPEDANCE RATIO Z(T)/Z(+ 20 °C)

MAXIMUM AT 120 Hz

RATED VOLTAGE

(WVDC)Z - 25 °C/Z + 20 °C Z - 40 °C/Z + 20 °C

6.3 4.0 8.0

10.0 3.0 6.0

16.0 2.0 4.0

25.0 to 100.0 2.0 3.0

160.0 to 200.0 2.0 4.0

250.0 4.0 6.0

DIMENSIONS in inches [millimeters]

CASE

CODE

NOMINAL CASE SIZE

D x L

LEAD SPACING

NOMINAL LEAD DIAMETER

TYPICAL WEIGHT

(g)

JA 0.197 x 0.433 [5.0 x 11.0] 0.079 [2.0] 0.020 [0.50] 0.44

AA 0.248 x 0.433 [6.3 x 11.0] 0.098 [2.5] 0.020 [0.50] 0.63

BB 0.315 x 0.453 [8.0 x 11.5] 0.138 [3.5] 0.024 [0.60] 1.03

CC 0.394 x 0.492 [10.0 x 12.5] 0.197 [5.0] 0.024 [0.60] 1.53

CD 0.394 x 0.630 [10.0 x 16.0] 0.197 [5.0] 0.024 [0.60] 1.86

CG 0.394 x 0.787 [10.0 x 20.0] 0.197 [5.0] 0.024 [0.60] 2.48

DG 0.492 x 0.787 [12.5 x 20.0] 0.197 [5.0] 0.024 [0.60] 3.98

DK 0.492 x 0.984 [12.5 x 25.0] 0.197 [5.0] 0.024 [0.60] 5.27

517D

www.vishay.com Vishay Sprague

Revision: 08-Oct-13 2Document Number: 42053

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ELECTROLYTIC CAPACITOR WITH CUT OR FORMED LEADS in inches [millimeters]

Notes

• Coding of cut or formed lead to be added to the end of type number in 15th position (with position 14 coded “6”).

(1) Formed lead.

(2) Lead thickness Ø d depends on capacitor specification.

EK 0.630 x 0.984 [16.0 x 25.0] 0.295 [7.5] 0.031 [0.80] 7.72

EN 0.630 x 1.24 [16.0 x 31.5] 0.295 [7.5] 0.031 [0.80] 9.90

ER 0.630 x 1.40 [16.0 x 35.5] 0.295 [7.5] 0.031 [0.80] 11.10

FR 0.709 x 1.40 [18.0 x 35.5] 0.295 [7.5] 0.031 [0.80] 13.04

FV 0.709 x 1.575 [18.0 x 40.0] 0.295 [7.5] 0.031 [0.80] 15.74

DIMENSIONS in inches [millimeters]

FORMING METHOD FORMED LEAD CODE DIMENSIONS

DSX (Max.)

Formed and cut F

0.197 [5.0] 0.197 [5.0] 0.059 [1.5]

0.248 [6.3] 0.197 [5.0] 0.098 [2.5]

0.315 [8.0] 0.197 [5.0] 0.098 [2.5]

Cut C

0.394 [10.0] 0.197 [5.0] -

0.492 [12.5] 0.197 [5.0] -

0.630 [16.0] 0.295 [7.5] -

0.709 [18.0] 0.295 [7.5] -

Snap-in S

0.197 [5.0] 0.197 [5.0] 0.059 [1.5]

0.248 [6.3] 0.197 [5.0] 0.059 [1.5]

0.315 [8.0] 0.197 [5.0] 0.059 [1.5]

0.394 [10.0] 0.197 [5.0] -

0.492 [12.5] 0.197 [5.0] -

0.630 [16.0] 0.295 [7.5] -

0.709 [18.0] 0.295 [7.5] -

DIMENSIONS in inches [millimeters]

CASE

CODE

NOMINAL CASE SIZE

D x L

LEAD SPACING

NOMINAL LEAD DIAMETER

TYPICAL WEIGHT

(g)

0.033 ± 0.006

[0.85 ± 0.15] 0.039 ± 0.008

[1.0 ± 0.2]

0.197 ± 0.20

[5.0 ± 0.5] D0.197 ± 0.20

[5.0 ± 0.5]

0.177

[4.5]

0.177

[4.5]

F (1)

(4, 5, 6.3, 8) (10, 12.5, 16, 18)

Code S

0.177

[4.5]

Code C

Ø d (2)

DS ± 0.20 [0.5]

F (1) F (1)

Code F

0.177

[4.5]

0.197 ± 0.20

[5.0 ± 0.5]

Ø d (2) Ø d (2) Ø d (2)

Code S Code S

Code S

517D

www.vishay.com Vishay Sprague

Revision: 08-Oct-13 3Document Number: 42053

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• The ammo pack code is to be added at the end of type number in the 14th and 15th position as 8P. To specify formed, cut or snap-in leads

and for tape and ammo, both positions 14 and 15 of the type number must be filled in with the proper codes.

(1) Except 0.394" [10.0 mm] and 0.492" [12.5 mm] diameter have straight unformed leads.

TAPING SPECIFICATIONS in inches [millimeters]

TAPED CAPACITORS FOR AUTOMATIC INSERTION SYSTEMS in inches [millimeters]

PACKAGING LEAD CODE

14th AND 15th DIGITS OF PN

SPECIFICATION LEAD SPACE CAPACITOR SIZES AVAILABLE

LEAD STYLE

Ammo pack 8P Formed lead (1) 0.197 [5.0]

0.197 x 0.433 [5.0 x 11.0] to

0.492 x 0.787 [12.5 x 25.0]

Case codes JA, AA, BB, CC, CD, DG, DK

DIMENSIONS in inches [millimeters]

ITEM

CASE SIZE

(Diameter x Length)

FORMED LEAD TYPE STRAIGHT LEAD TYPE

0.197 x 0.433

[5.0 x 11.0]

0.248 x 0.433

[6.3 x 11.0]

0.315 x 0.452

[8.0 x 11.5]

0.394 [10.0]

(Dia.)

0.492 [12.5]

(Dia.)

Ø d - Lead-wire diameter 0.020 [0.5] 0.020 [0.5] 0.024 [0.6] 0.024 [0.6] 0.024 [0.6]

P - Pitch of component 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.591 [15.0]

P0 - Feed hole pitch 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.591 [15.0]

F - Lead-to-lead distance 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0]

K - Clinch height 0.098 [2.5] 0.098 [2.5] 0.157 [4.0] - -

H - Height of component from tape center 0.728 [18.5] 0.728 [18.5] 0.787 [20.0] 0.728 [18.5] 0.630 [16.0]

H0 - Lead-wire clinch height 0.630 [16.0] 0.630 [16.0] 0.630 [16.0] - -

W - Tape width 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0]

W0 - Hold down tape width 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] 0.512 [13.0]

D0 - Feed hole diameter 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0]

t - Total tape thickness 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7]

Ø d

Formed Lead Type

517D

www.vishay.com Vishay Sprague

Revision: 08-Oct-13 4Document Number: 42053

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ORDERING EXAMPLE

Electrolytic capacitor 517D series: 517D 107M 6R3 JA 6 A E3

PACKING AND LEAD STYLES

6A Bulk; uncut leads

6C Bulk; cut leads

6F Bulk; formed and cut leads

6S Bulk; snap-in leads

8P Ammopack, (cases codes JA, AA, BB, CC, CD, CG, DG only)

DESCRIPTION

CODE EXPLANATION

517D Product type

107 Capacitance value (100 μF)

M Tolerance (M = ± 20 %)

6R3 Voltage rating at 85 °C (6R3 = 6.3 V)

JA Can size (see dimensions table)

6 Packaging (bulk)

A Lead style (uncut)

E3 RoHS compliant indicator

ELECTRICAL DATA AND ORDERING INFORMATION

CAPACITANCE

(μF) PART NUMBER NOMINAL CASE SIZE

D x L

MAX. RIPPLE

AT + 105 °C

120 Hz (mA)

MAX. DF

AT + 20 °C

120 Hz

6.3 WVDC AT + 105 °C, SURGE = 8 V

22.0 517D226M6R3JA6AE3 0.197 x 0.433 [5.0 x 11.0] 34.0 0.26

33.0 517D336M6R3JA6AE3 0.197 x 0.433 [5.0 x 11.0] 50.0 0.26

47.0 517D476M6R3JA6AE3 0.197 x 0.433 [5.0 x 11.0] 65.0 0.26

100.0 517D107M6R3JA6AE3 0.197 x 0.433 [5.0 x 11.0] 100.0 0.26

220.0 517D227M6R3AA6AE3 0.248 x 0.433 [6.3 x 11.0] 165.0 0.26

330.0 517D337M6R3AA6AE3 0.248 x 0.433 [6.3 x 11.0] 200.0 0.26

470.0 517D477M6R3BB6AE3 0.315 x 0.453 [8.0 x 11.5] 280.0 0.26

1000.0 517D108M6R3CC6AE3 0.394 x 0.492 [10.0 x 12.5] 470.0 0.26

2200.0 517D228M6R3DG6AE3 0.492 x 0.787 [12.5 x 20.0] 930.0 0.26

3300.0 517D338M6R3DG6AE3 0.492 x 0.787 [12.5 x 20.0] 1100.0 0.26

4700.0 517D478M6R3EK6AE3 0.630 x 0.984 [16.0 x 25.0] 1320.0 0.26

6800.0 517D688M6R3EK6AE3 0.630 x 0.984 [16.0 x 25.0] 1490.0 0.26

10 000.0 517D109M6R3EN6AE3 0.630 x 1.240 [16.0 x 31.5] 1830.0 0.26

15 000.0 517D159M6R3FR6AE3 0.709 x 1.398 [18.0 x 35.5] 2280.0 0.26

10 WVDC AT + 105 °C, SURGE = 13 V

22.0 517D226M010JA6AE3 0.197 x 0.433 [5.0 x 11.0] 45.0 0.22

33.0 517D336M010JA6AE3 0.197 x 0.433 [5.0 x 11.0] 60.0 0.22

47.0 517D476M010JA6AE3 0.197 x 0.433 [5.0 x 11.0] 75.0 0.22

100.0 517D107M010JA6AE3 0.197 x 0.433 [5.0 x 11.0] 110.0 0.22

220.0 517D227M010AA6AE3 0.248 x 0.433 [6.3 x 11.0] 180.0 0.22

330.0 517D337M010BB6AE3 0.315 x 0.453 [8.0 x 11.5] 255.0 0.22

470.0 517D477M010BB6AE3 0.315 x 0.453 [8.0 x 11.5] 305.0 0.22

1000.0 517D108M010CD6AE3 0.394 x 0.630 [10.0 x 16.0] 570.0 0.22

2200.0 517D228M010DG6AE3 0.492 x 0.787 [12.5 x 20.0] 1010.0 0.22

3300.0 517D338M010DK6AE3 0.492 x 0.984 [12.5 x 25.0] 1220.0 0.22

4700.0 517D478M010EK6AE3 0.630 x 0.984 [16.0 x 25.0] 1410.0 0.22

6800.0 517D688M010EN6AE3 0.630 x 1.240 [16.0 x 31.5] 1610.0 0.22

10 000.0 517D109M010FR6AE3 0.709 x 1.398 [18.0 x 35.5] 1980.0 0.22

15 000.0 517D159M010FV6AE3 0.709 x 1.575 [18.0 x 40.0] 2470.0 0.22

517D

www.vishay.com Vishay Sprague

Revision: 08-Oct-13 5Document Number: 42053

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

16 WVDC AT + 105 °C, SURGE = 20 V

10.0 517D106M016JA6AE3 0.197 x 0.433 [5.0 x 11.0] 35.0 0.18

22.0 517D226M016JA6AE3 0.197 x 0.433 [5.0 x 11.0] 55.0 0.18

33.0 517D336M016JA6AE3 0.197 x 0.433 [5.0 x 11.0] 70.0 0.18

47.0 517D476M016JA6AE3 0.197 x 0.433 [5.0 x 11.0] 85.0 0.18

100.0 517D107M016AA6AE3 0.248 x 0.433 [6.3 x 11.0] 135.0 0.18

220.0 517D227M016BB6AE3 0.315 x 0.453 [8.0 x 11.5] 235.0 0.18

330.0 517D337M016BB6AE3 0.315 x 0.453 [8.0 x 11.5] 285.0 0.18

470.0 517D477M016CC6AE3 0.394 x .0492 [10.0 x 12.5] 395.0 0.18

1000.0 517D108M016CG6AE3 0.394 x 0.787 [10.0 x 20.0] 700.0 0.18

2200.0 517D228M016DK6AE3 0.492 x 0.984 [12.5 x 25.0] 1150.0 0.18

3300.0 517D338M016EK6AE3 0.630 x 0.984 [16.0 x 25.0] 1350.0 0.18

4700.0 517D478M016EN6AE3 0.630 x 1.240 [16.0 x 31.5] 1560.0 0.18

6800.0 517D688M016FR6AE3 0.709 x 1.398 [18.0 x 35.5] 1750.0 0.18

10 000.0 517D109M016FV6AE3 0.709 x 1.575 [18.0 x 40.0] 2170.0 0.18

25 WVDC AT + 105 °C, SURGE = 32 V

4.7 517D475M025JA6AE3 0.197 x .0433 [5.0 x 11.0] 24.0 0.16

10.0 517D106M025JA6AE3 0.197 x 0.433 [5.0 x 11.0] 39.0 0.16

22.0 517D226M025JA6AE3 0.197 x 0.433 [5.0 x 11.0] 60.0 0.16

33.0 517D336M025JA6AE3 0.197 x 0.433 [5.0 x 11.0] 75.0 0.16

47.0 517D476M025JA6AE3 0.197 x 0.433 [5.0 x 11.0] 90.0 0.16

100.0 517D107M025AA6AE3 0.248 x 0.433 [6.3 x 11.0] 145.0 0.16

220.0 517D227M025BB6AE3 0.315 x 0.453 [8.0 x 11.5] 250.0 0.16

330.0 517D337M025CC6AE3 0.394 x 0.492 [10.0 x 12.5] 355.0 0.16

470.0 517D477M025CD6AE3 0.394 x 0.630 [10.0 x 16.0] 470.0 0.16

1000.0 517D108M025DG6AE3 0.492 x 0.787 [12.5 x 20.0] 855.0 0.16

2200.0 517D228M025EK6AE3 0.630 x 0.984 [16.0 x 25.0] 1230.0 0.16

3300.0 517D338M025EN6AE3 0.630 x 1.240 [16.0 x 31.5] 1450.0 0.16

4700.0 517D478M025FR6AE3 0.709 x 1.398 [18.0 x 35.5] 1660.0 0.16

35 WVDC AT + 105 °C, SURGE = 44 V

4.7 517D475M035JA6AE3 0.197 x 0.433 [5.0 x 11.0] 27.0 0.13

10.0 517D106M035JA6AE3 0.197 x 0.433 [5.0 x 11.0] 44.0 0.13

22.0 517D226M035JA6AE3 0.197 x 0.433 [5.0 x 11.0] 65.0 0.13

33.0 517D336M035JA6AE3 0.197 x 0.433 [5.0 x 11.0] 85.0 0.13

47.0 517D476M035AA6AE3 0.248 x 0.433 [6.3 x 11.0] 115.0 0.13

100.0 517D107M035BB6AE3 0.315 x 0.453 [8.0 x 11.5] 190.0 0.13

220.0 517D227M035CC6AE3 0.394 x 0.492 [10.0 x 12.5] 325.0 0.13

330.0 517D337M035CD6AE3 0.394 x 0.630 [10.0 x 16.0] 440.0 0.13

470.0 517D477M035CG6AE3 0.394 x 0.787 [10.0 x 20.0] 580.0 0.13

1000.0 517D108M035DK6AE3 0.492 x 0.984 [12.5 x 25.0] 995.0 0.13

2200.0 517D228M035EN6AE3 0.630 x 1.240 [16.0 x 31.5] 1450.0 0.13

3300.0 517D338M035FR6AE3 0.709 x 1.398 [18.0 x 35.5] 1660.0 0.13

4700.0 517D478M035FV6AE3 0.709 x 1.575 [18.0 x 40.0] 2030.0 0.13

ELECTRICAL DATA AND ORDERING INFORMATION

CAPACITANCE

(μF) PART NUMBER NOMINAL CASE SIZE

D x L

MAX. RIPPLE

AT + 105 °C

120 Hz (mA)

MAX. DF

AT + 20 °C

120 Hz

517D

www.vishay.com Vishay Sprague

Revision: 08-Oct-13 6Document Number: 42053

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

50 WVDC AT + 105 °C, SURGE = 63 V

0.47 517D474M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 7.0 0.10

1.0 517D105M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 12.0 0.10

2.2 517D225M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 18.0 0.10

3.3 517D335M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 25.0 0.10

4.7 517D475M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 30.0 0.10

10.0 517D106M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 50.0 0.10

22.0 517D226M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 75.0 0.10

33.0 517D336M050M6AE3 0.248 x 0.433 [6.3 x 11.0] 105.0 0.10

47.0 517D476M050AA6AE3 0.248 x 0.433 [6.3 x 11.0] 125.0 0.10

100.0 517D107M050BB6AE3 0.315 x 0.453 [8.0 x 11.5] 210.0 0.10

220.0 517D227M050CD6AE3 0.394 x 0.630 [10.0 x 16.0] 400.0 0.10

330.0 517D337M050CG6AE3 0.394 x 0.787 [10.0 x 20.0] 535.0 0.10

470.0 517D477M050DG6AE3 0.492 x 0.787 [12.5 x 20.0] 730.0 0.10

1000.0 517D108M050EK6AE3 0.630 x 0.984 [16.0 x 25.0] 1110.0 0.10

2200.0 517D228M050FR6AE3 0.709 x 1.398 [18.0 x 35.5] 1530.0 0.10

63 WVDC AT + 105 °C, SURGE = 79 V

4.7 517D475M063JA6AE3 0.197 x 0.433 [5.0 x 11.0] 34.0 0.09

10.0 517D106M063JA6AE3 0.197 x 0.433 [5.0 x 11.0] 55.0 0.09

22.0 517D226M063AA6AE3 0.248 x 0.433 [6.3 x 11.0] 90.0 0.09

33.0 517D336M063AA6AE3 0.248 x 0.433 [6.3 x 11.0] 110.0 0.09

47.0 517D476M063BB6AE3 0.315 x 0.453 [8.0 x 11.5] 155.0 0.09

100.0 517D107M063CC6AE3 0.394 x .0492 [10.0 x 12.5] 260.0 0.09

220.0 517D227M063CG6AE3 0.394 x 0.787 [10.0 x 20.0] 465.0 0.09

330.0 517D337M063DG6AE3 0.492 x 0.787 [12.5 x 20.0] 650.0 0.09

470.0 517D477M063DK6AE3 0.492 x 0.984 [12.5 x 25.0] 800.0 0.09

1000.0 517D108M063EN6AE3 0.630 x 1.240 [16.0 x 31.5] 1200.0 0.09

2200.0 517D228M063FV6AE3 0.709 x 1.575 [18.0 x 40.0] 1840.0 0.09

100 WVDC AT + 105 °C, SURGE = 125 V

0.47 517D474M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 10.0 0.08

1.0 517D105M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 15.0 0.08

2.2 517D225M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 22.0 0.08

3.3 517D335M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 29.0 0.08

4.7 517D475M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 37.0 0.08

10.0 517D106M100AA6AE3 0.248 x 0.433 [6.3 x 11.0] 65.0 0.08

22.0 517D226M100BB6AE3 0.315 x 0.453 [8.0 x 11.5] 115.0 0.08

33.0 517D336M100CC6AE3 0.394 x 0.492 [10.0 x 12.5] 160.0 0.08

47.0 517D476M100CD6AE3 0.394 x 0.630 [10.0 x 16.0] 220.0 0.08

100.0 517D107M100DG6AE3 0.492 x 0.787 [12.5 x 20.0] 385.0 0.08

220.0 517D227M100EK6AE3 0.630 x 0.984 [16.0 x 25.0] 590.0 0.08

330.0 517D337M100EK6AE3 0.630 x 0.984 [16.0 x 25.0] 720.0 0.08

470.0 517D477M100EN6AE3 0.630 x 1.240 [16.0 x 31.5] 875.0 0.08

1000.0 517D108M100FV6AE3 0.709 x 1.575 [18.0 x 40.0] 1320.0 0.08

ELECTRICAL DATA AND ORDERING INFORMATION

CAPACITANCE

(μF) PART NUMBER NOMINAL CASE SIZE

D x L

MAX. RIPPLE

AT + 105 °C

120 Hz (mA)

MAX. DF

AT + 20 °C

120 Hz

517D

www.vishay.com Vishay Sprague

Revision: 08-Oct-13 7Document Number: 42053

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

160 WVDC AT + 105 °C, SURGE = 200 V

0.47 517D474M160AA6AE3 0.248 x 0.433 [6.3 x 11.0] 12.0 0.15

1.0 517D105M160AA6AE3 0.248 x 0.433 [6.3 x 11.0] 17.0 0.15

2.2 517D225M160AA6AE3 0.248 x 0.433 [6.3 x 11.0] 25.0 0.15

3.3 517D335M160BB6AE3 0.315 x 0.453 [8.0 x 11.5] 36.0 0.15

4.7 517D475M160BB6AE3 0.315 x 0.453 [8.0 x 11.5] 43.0 0.15

10.0 517D106M160CC6AE3 0.394 x 0.492 [10.0 x 12.5] 70.0 0.15

22.0 517D226M160CG6AE3 0.394 x 0.787 [10.0 x 20.0] 130.0 0.15

33.0 517D336M160DG6AE3 0.492 x 0.787 [12.5 x 20.0] 180.0 0.15

47.0 517D476M160DK6AE3 0.492 x 0.984 [12.5 x 25.0] 220.0 0.15

100.0 517D107M160EK6AE3 0.630 x 0.984 [16.0 x 25.0] 330.0 0.15

220.0 517D227M160FR6AE3 0.709 x 1.398 [18.0 x 35.5] 500.0 0.15

200 WVDC AT + 105 °C, SURGE = 250 V

0.47 517D474M200AA6AE3 0.248 x 0.433 [6.3 x 11.0] 12.0 0.15

1.0 517D105M200AA6AE3 0.248 x 0.433 [6.3 x 11.0] 17.0 0.15

2.2 517D225M200AA6AE3 0.248 x 0.433 [6.3 x 11.0] 25.0 0.15

3.3 517D335M200BB6AE3 0.315 x 0.453 [8.0 x 11.5] 36.0 0.15

4.7 517D475M200CC6AE3 0.394 x 0.492 [10.0 x 12.5] 50.0 0.15

10.0 517D106M200CD6AE3 0.394 x 0.630 [10.0 x 16.0] 80.0 0.15

22.0 517D226M200CG6AE3 0.394 x 0.787 [10.0 x 20.0] 140.0 0.15

33.0 517D336M200DK6AE3 0.492 x 0.984 [12.5 x 25.0] 198.0 0.15

47.0 517D476M200DK6AE3 0.492 x 0.984 [12.5 x 25.0] 220.0 0.15

100.0 517D107M200EN6AE3 0.630 x 1.240 [16.0 x 31.5] 335.0 0.15

220.0 517D227M200FV6AE3 0.709 x 1.575 [18.0 x 40.0] 515.0 0.15

250 WVDC AT + 105 °C, SURGE = 300 V

0.47 517D474M250AA6AE3 0.248 x 0.433 [6.3 x 11.0] 12.0 0.15

1.0 517D105M250AA6AE3 0.248 x 0.433 [6.3 x 11.0] 17.0 0.15

2.2 517D225M250BB6AE3 0.315 x 0.453 [8.0 x 11.5] 29.0 0.15

3.3 517D335M250CC6AE3 0.394 x 0.492 [10.0 x 12.5] 42.0 0.15

4.7 517D475M250CC6AE3 0.394 x 0.492 [10.0 x 12.5] 50.0 0.15

10.0 517D106M250CG6AE3 0.394 x 0.787 [10.0 x 20.0] 88.0 0.15

22.0 517D226M250DK6AE3 0.492 x 0.984 [12.5 x 25.0] 155.0 0.15

33.0 517D336M250DK6AE3 0.492 x 0.984 [12.5 x 25.0] 190.0 0.15

47.0 517D476M250EK6AE3 0.630 x 0.984 [16.0 x 25.0] 230.0 0.15

100.0 517D107M250FR6AE3 0.709 x 1.398 [18.0 x 35.5] 340.0 0.15

ELECTRICAL DATA AND ORDERING INFORMATION

CAPACITANCE

(μF) PART NUMBER NOMINAL CASE SIZE

D x L

MAX. RIPPLE

AT + 105 °C

120 Hz (mA)

MAX. DF

AT + 20 °C

120 Hz

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.