PRELIMINARY DATA SHE
ET
|
OCTOBER 28
, 2007
1
of
6
For more information on this and other products:
Contact Sales at Emcore 626-293-3400, or visit www.emcore.com.
Applications
High Performance Supertrunking Links
High Power Distribution Networks
Fiber Deep Architectures
FTTx Networks
Features
Full Function High Power Fiber Optic
Amplifier Ready for Integration
Low Noise Figure (Typ < 6 dB)
Total Input Power Range: –10 dBm to
+12 dBm
Total Output Power: +27 dBm to
+35 dBm (Optical Output Power
Splitter is Optional For These Units)
Standard RS-232 Communications
Low Electrical Power Consumption
Input / Output Isolation > 40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
The ORTEL PONA 3000 Series Fiber Optical Amplifier Module is an
ideal building block for OEM system integrators. The family of PONA
3000 Optical Amplifiers is designed to meet the most demanding
noise performance requirements of CATV and FTTx applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 3000 series optical amplifiers provide optical
isolation on the input and output of the gain block for stable, low noise
operation. The input and output optical signal power levels are
detected for monitoring and control. The input optical signal is
amplified with active gain control for a constant output power level, or
with active output power control for constant gain mode. The PONA
3000 series optical amplifiers also provide monitoring functions and
associated alarms for all vital characteristics. The optical output of the
PONA 3000 series optical amplifiers can be split into number of ports
by an optional internal splitter.
PONA3000 series includes AC/DC power supply, front panel, optical
splitters, network card and all necessary connectors.
PONA 3000 Series Erbium Doped Fiber Amplifier
PRELIMINARY DATA SHE
ET
|
OCTOBER 28
, 2007
2
of
6
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
Specifications
PROPERTY UNIT LIMIT PONA MODELS COMMENT
Product Code 3027 3030 3032 3035
PERFORMANCE (note 1)
Operating Input Power Pin
(dBm) Max +12 +12 +12 +12
Operating Input Power Pin
(dBm) Min -10 -10 -10 -10
Output Power Po (dBm) 27.0 30.0 32.0 35.0 Nominal (note 2)
Noise Figure NF (dB) Typ/Max 5.5/6.0 5.5/6.0 5.5/6.0 5.5/6.0 (note 3)
Static Gain Flatness GF (dB) Max +/-1.0 +/-1.0 +/-1.0 +/-1.0 (note 4)
Dynamic Gain Flatness (dB) Max +/-2.00 +/-2.00 +/-2.25 +/-2.50 (note 5)
Output Power Stability (dB) Max +/- 0.25 +/- 0.25 +/-0.25 +/- 0.25 (note 6)
Power Consumption
(steady state regime) Psys (W) Max 40
25 50
30 65
40 80
50 50
o
C Case (premium)
50
o
C Case (economy)
(note7)
Remnant pump power to output Prp (dBm) Nom. <-30 <-30 <-30 <-30
Notes:
1) Unless stated otherwise all specifications apply over the full temperature range and humidity
2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value
3) Measured @ 25°C, ΣPin = 0 dBm
4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C
6) Stability over polarization and temperature
7) Premium version – PONA with cooled, Telcordia qualified pumps
Economy version – PONA with uncooled pumps
Physical
GENERAL PROPERTY REQUIREMENT COMMENTS
Operating Wavelength 1545 ~ 1562nm Standard
Operating Case Temperature 0°C to 50°C Standard
Storage Temperature -40°C to 85°C Standard
Operating Humidity 20% to 85% Non-condensing
Voltage Supply Range
85 VAC to 265 VAC 50/60 Hz
-36 to -60 V DC
AC version
DC version
*(Redundant Power Supply is
Available by Customer Request)
Optical Connectors See ordering information User Specified
Dimensions In Inches 19.0”W x 14.76”D x 3.44”H 19’’ Rack Mounted, 2 RU
PRELIMINARY DATA SHE
ET
|
OCTOBER 28
, 2007
3
of
6
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
Block Diagram: Cladding Pump Technology
Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and
multi-mode pump lasers) to produce cost effective high power optical amplification. This technology
enables the development of higher power EDFAs-something that is cost prohibitive when using
standard erbium fiber and single mode pumps.
Sample FTTx Architecture
ONT
EDFA
20 outputs of 20
dBm
WDM
RF
OLT
Homes
Businesses
Multi
Dwelling Units
Splitter
ONT
Video
1490nm
1310nm
1550nm
20 Km
1550nm
Tx
- Voice
- Data
- Video
Data
Voice
Splitter
Splitter
Splitter
ONT
ONT
ONT
ONT
ONT
ONT
ONT
ONT
ONT
ONT
ONTONT
EDFA
20 outputs of 20
dBm
WDM
RF
OLT
Homes
Businesses
Multi
Dwelling Units
Splitter
ONTONT
VideoVideo
1490nm
1310nm
1550nm
20 Km
1550nm
Tx
- Voice
- Data
- Video
DataData
VoiceVoice
Splitter
Splitter
Splitter
ONTONT
ONTONT
ONTONT
ONTONT
ONTONT
ONTONT
ONTONT
ONTONT
ONTONT
ONTONT
980 nm
pump Output
Monitor
Input
monitor Multi-mode
pumps
Drive
Electronics
Er Er/Yb Assembly
Input
Hybrid Filter / Isolator Isolator 1% Tap
980 nm
pump Output
Monitor
Input
monitor Multi-mode
pumps
Drive
Electronics
Er Er/Yb Assembly
Input
Hybrid Filter / Isolator Isolator 1% Tap
PRELIMINARY DATA SHE
ET
|
OCTOBER 28
, 2007
4
of
6
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
Outline Drawing AC and DC versions shown below with 8-port option
5
of
6
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PRELIMINARY DATA SHE
ET
|
OCTOBER 28
, 2007
PONA3000 Series High Power EDFA
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV
laser product based on the maximum optical output power shown below. During use as intended, the
laser energy is fully contained within the fiber network such that there is no accessible laser radiation
and would meet the requirements for a Class I laser product. The laser product report has been
submitted to the CDRH and the accession number is expected by October 2006.
Wavelength = 1545 ~ 1562 nm (dependant on input source)
Maximum Output Power = 3.2 W (single output, 35 dBm model)
6
of
6
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PRELIMINARY DATA SHE
ET
|
OCTOBER 28
, 2007
PONA3000 Series High Power EDFA
Ordering Information
*
PONA30 - - - -
Class:
Premium: Utilizes cooled pump lasers
Economy: Utilizes uncooled pump lasers
* PONA3000 series with one or two optical outputs will have special high power output optical connector(s) and
optical bulkhead(s)
For exact model number, please contact your Sales Representative.
Qualifications
FCC: Subpart B. Part 15, class “A” Unintentional Radiators
CE: EN50083-2, 19995 with Amendment 1, which Incorporates EN 55013 Radiated and
Conducted Emissions
EN 61000-4-3 Radiated Immunity
EN 55020 Conducted Immunity
EN 61000-3-2 Harmonics
All Components Meet Telcordia GR-1312 and GR-486 Standards (Except Pumps in
Economy Class).
EN 61000-3-2 Harmonics
Fit Rate:
90% Level of Confidence < 2000 @ 30°C Premium PONA 3035
90% Level of Confidence < 3500 @ 30°C Economy PONA 3035
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.
Power
Level Connector
Options # of Output
Ports Class Input Voltage
27: 27 dBm SC: SC/APC 01: 1 port P: Premium AC: 90-260 VAC 50/60 Hz
30: 30 dBm FC: FC/APC 02: 2 ports E: Economy DC: -48 VDC
32: 32 dBm EC: E2000/APC 04: 4 ports 2DC: Redundant DC
35: 35 dBm TC: SC/UPC 08: 8 ports
GC: FC/UPC 16: 16 ports
20: 20 ports
-
-