Product data sheet
09 45 151 1120
RJI RJ45 PN plug Cat5, 4p IDC straight
RJI RJ45 PN plug Cat5, 4p IDC straight
Image is for illustration purposes only. Please refer to product description.
Part number 09 45 151 1120
Specification RJI RJ45 PN plug Cat5, 4p IDC straight
HARTING eCatalogue https://b2b.harting.com/09451511120
Identification
Category Connectors
Series HARTING RJ Industrial®
Element Cable connector
Specification Straight
Version
Termination method IDC termination
Shielding Fully shielded, 360° shielding contact
Number of contacts 4
Technical characteristics
Conductor cross-section 0.1...0.32 mm²
Conductor cross-section AWG 27 ... AWG 22
Wire outer diameter 1.6 mm
Limiting temperature -40...+70°C
Mating cycles ≥750
Degree of protection acc. to IEC 60529 IP20
Cable diameter 4.5 ... 9 mm
Transmission characteristics Cat. 5Class D up to 100 MHz
Data rate 10Mbit/s
100Mbit/s
Page1/2 | Creation date2021-02-25 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to
the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com