BAS116TT1G Switching Diode Features * * * * Low Leakage Current Applications Medium Speed Switching Times Available in 8 mm Tape and Reel These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant http://onsemi.com 3 CATHODE 1 ANODE MAXIMUM RATINGS (TA = 25C) Symbol Max Unit Continuous Reverse Voltage VR 75 V Peak Forward Current IF 200 mA IFM(surge) 500 mA Rating Peak Forward Surge Current Total Device Dissipation, FR-4 Board (Note 1) TA = 25C Derated above 25C Thermal Resistance, Junction-to-Ambient (Note 1) Total Device Dissipation, FR-4 Board (Note 2) TA = 25C Derated above 25C Thermal Resistance, Junction-to-Ambient (Note 2) Junction and Storage Temperature Range 3 1 THERMAL CHARACTERISTICS Characteristic MARKING DIAGRAM 2 CASE 463 SOT-416 STYLE 2 AE MG G 1 Symbol PD Max Unit 225 mW 1.8 mW/C 555 C/W 360 mW 2.9 mW/C RqJA 345 C/W TJ, Tstg -55 to +150 C RqJA PD AE M G = Specific Device Code = Date Code = Pb-Free Package ORDERING INFORMATION Device Package Shipping BAS116TT1G SOT-416 (Pb-Free) 3000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-4 @ Minimum Pad 2. FR-4 @ 1.0 x 1.0 Inch Pad (c) Semiconductor Components Industries, LLC, 2011 September, 2011 - Rev. 1 1 Publication Order Number: BAS116TT1/D BAS116TT1G ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit V(BR) 75 - Vdc Reverse Voltage Leakage Current (VR = 75 Vdc) Reverse Voltage Leakage Current (VR = 75 Vdc, TJ = 150C) IR - - 5.0 80 nAdc Forward Voltage (IF = 1.0 mAdc) Forward Voltage (IF = 10 mAdc) Forward Voltage (IF = 50 mAdc) Forward Voltage (IF = 150 mAdc) VF - - - - 900 1000 1100 1250 mV Diode Capacitance (VR = 0 V, f = 1.0 MHz) CD - 2.0 pF Reverse Recovery Time (IF = IR = 10 mAdc) (Figure 1) trr - 3.0 ms OFF CHARACTERISTICS Reverse Breakdown Voltage (IBR = 100 mAdc) 820 W +10 V 2.0 k 100 mH tr 0.1 mF IF tp IF t trr 10% t 0.1 mF 90% DUT 50 W INPUT SAMPLING OSCILLOSCOPE 50 W Output Pulse Generator 1. 2. 3. iR(REC) = 1.0 mA IR VR OUTPUT PULSE (IF = IR = 10 mA; MEASURED at iR(REC) = 1.0 mA) INPUT SIGNAL A 2.0 kW variable resistor adjusted for a Forward Current (IF) of 10 mA. Input pulse is adjusted so IR(peak) is equal to 10 mA. tp trr Figure 1. Recovery Time Equivalent Test Circuit TYPICAL CHARACTERISTICS 1.2 CT, TOTAL CAPACITANCE (pF) IF, FORWARD CURRENT (mA) 1,000 100 150C 10 25C -55C 1 0.1 0 0.2 0.4 0.6 0.8 1.0 TA = 25C 1.0 0.8 0.6 0.4 0.2 0 1.2 0 10 20 30 40 50 60 VF, FORWARD VOLTAGE (V) VR, REVERSE VOLTAGE (V) Figure 2. Forward Voltage Figure 3. Capacitance http://onsemi.com 2 70 80 BAS116TT1G PACKAGE DIMENSIONS SC-75/SOT-416 CASE 463-01 ISSUE F -E- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 2 3 b 3 PL 0.20 (0.008) e -D- DIM A A1 b C D E e L HE 1 M D HE C 0.20 (0.008) E INCHES NOM MAX 0.031 0.035 0.002 0.004 0.008 0.012 0.006 0.010 0.063 0.067 0.031 0.035 0.04 BSC 0.004 0.006 0.008 0.061 0.063 0.065 MIN 0.027 0.000 0.006 0.004 0.059 0.027 STYLE 2: PIN 1. ANODE 2. N/C 3. CATHODE A L MILLIMETERS MIN NOM MAX 0.70 0.80 0.90 0.00 0.05 0.10 0.15 0.20 0.30 0.10 0.15 0.25 1.55 1.60 1.65 0.70 0.80 0.90 1.00 BSC 0.10 0.15 0.20 1.50 1.60 1.70 A1 SOLDERING FOOTPRINT* 0.356 0.014 1.803 0.071 0.787 0.031 0.508 0.020 1.000 0.039 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 3 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BAS116TT1/D