DEMO MANUAL DC1488A LTC2634 Quad 12-Bit SPI VOUT DAC with Internal Reference DESCRIPTION Demonstration circuit 1488A features the LTC(R)2634 quad 12-bit DAC. This device has an integrated, high accuracy, low drift reference. It has a rail-to-rail output buffer and is guaranteed monotonic. This DAC communicates through the simple SPI/MICROWIRE compatible interface. Design files for this circuit board are available at http://www.linear.com/demo L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and QuikEval is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. ANALOG OUTPUTS TO DC590 DEMOBOARD TYPE LTC2634 VARIATION POWER UP FULL SCALE DC1488A-A LZ Zero 2.5V DC1488A-B LMI Mid-Scale 2.5V DC1488A-C HZ Zero 4.096V DC1488A-D HMI Mid-Scale 4.096V dc1488af 1 DEMO MANUAL DC1488A QUICK START PROCEDURE HARDWARE SETUP Connect DC1488A to a DC590 USB serial controller using the supplied 14 conductor ribbon cable. Connect DC590 to a host PC with a standard USB A/B cable. Run the evaluation software supplied with DC590 or download it from www.linear.com. The correct control panel will be loaded automatically. To update DAC values, enter new value in corresponding output text box and press enter. Be sure the DAC is enabled. Analog Connections Complete software documentation is available from the Help menu item, as features may be added periodically. DAC Outputs: The four DAC outputs from the LTC2634 are brought out to turrets labeled VOUTA through VOUTD. These may be connected to external instruments or other circuitry. NOTE: DAC outputs are not in alphabetical order on the circuit board. VREF: The REF turret is connected directly to the reference terminals of the LTC2634. When the integrated reference is being used, the reference voltage may be monitored at this point. An external reference may also be applied to this turret after changing the setting in the QuikEvalTM software. Grounding And Power Connections Power (VCC): Normally DC1488A is powered by the DC590 controller. VCC can be supplied to this turret, however the power supply on DC590 must be disabled! Refer to the DC590 Quick Start Guide for more details on this mode of operation. Grounding: Ground turrets as well as 2 grounding strips are provided. PARTS LIST ITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER 1 3 C1, C3, C4 CAP., X7R, 0.1F, 16V, 10%, 0603 AVX, 0603YC104KAT 2 1 C2 CAP., X5R, 10F, 6.3V, 20%, 0603 AVX, 06036D106MAT 3 10 E1-E10 TESTPOINT, TURRET, 0.095" MILL-MAX, 2501-2-00-80-00-00-07-0 4 1 JP1 0.1" SINGLE ROW HEADER, 3-PIN SAMTEC, TSW-103-07-L-S 5 1 JP1 SHUNT, 0.1" BLK SAMTEC, SNT-100-BK-G 6 1 J1 HEADER, 2X7PIN, 0.079CC MOLEX, 87831-1420 7 2 R1, R2 RES., CHIP, 10k, 1/16W, 1%, 0603 VISHAY, CRCW060310K0FKEA 8 2 R3, R4 RES., CHIP, 4.99k, 1/16W, 1%, 0603 VISHAY, CRCW06034K99FKEA 9 1 U2 IC, 24LC025-I/ST, TSSOP MICROCHIP, 24LC025-I/ST dc1488af 2 DEMO MANUAL DC1488A SCHEMATIC DIAGRAM dc1488af Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights. 3 DEMO MANUAL DC1488A DEMONSTRATION BOARD IMPORTANT NOTICE Linear Technology Corporation (LTC) provides the enclosed product(s) under the following AS IS conditions: This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY and is not provided by LTC for commercial use. As such, the DEMO BOARD herein may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety measures typically found in finished commercial goods. As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic compatibility and therefore may or may not meet the technical requirements of the directive, or other regulations. If this evaluation kit does not meet the specifications recited in the DEMO BOARD manual the kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY THE SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THIS INDEMNITY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user releases LTC from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user's responsibility to take any and all appropriate precautions with regard to electrostatic discharge. Also be aware that the products herein may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). No License is granted under any patent right or other intellectual property whatsoever. LTC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or any other intellectual property rights of any kind. LTC currently services a variety of customers for products around the world, and therefore this transaction is not exclusive. Please read the DEMO BOARD manual prior to handling the product. Persons handling this product must have electronics training and observe good laboratory practice standards. Common sense is encouraged. This notice contains important safety information about temperatures and voltages. For further safety concerns, please contact a LTC application engineer. Mailing Address: Linear Technology 1630 McCarthy Blvd. Milpitas, CA 95035 Copyright (c) 2004, Linear Technology Corporation dc1488af 4 Linear Technology Corporation LT 0411 * PRINTED IN USA 1630 McCarthy Blvd., Milpitas, CA 95035-7417 (408) 432-1900 FAX: (408) 434-0507 www.linear.com (c) LINEAR TECHNOLOGY CORPORATION 2011