ATC 700 E Series NPO Porcelain High RF Power Multilayer Capacitors * Case E Size (.380" x .380") * Capacitance Range 1 pF to 2200 pF * High Q * Ultra-Stable NPO Performance * Low ESR/ESL * High RF Current/Voltage * High RF Power * High Reliability * Extended WVDC up to 7200 VDC * Available with Encapsulation Option* ELECTRICAL AND MECHANICAL SPECIFICATIONS ATC, the industry leader, offers new improved ESR/ESL performance for the 700 E Series RF Capacitors. This high Q multilayer capacitor is ultra-stable under high RF current and voltage applications with NPO performance. High density porcelain construction provides a rugged, hermetic package. ATC offers an encapsulation option for applications requiring extended protection agains arc-over and corona. Typical functional applications: Bypass, Coupling, Tuning, Impedance Matching and DC Blocking. Typical circuit applications: HF/RF Power Amplifiers, Transmitters, Antenna Tuning, Plasma Chambers and Medical (MRI coils). QUALITY FACTOR (Q): *For leaded styles only See Capacitance Values Table, page 2. ENVIRONMENTAL TESTS ATC 700 E Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. Greater than 10,000 (1 pF to 1000 pF) @ 1 MHz. Greater than 10,000 (1100 pF to 2200 pF) @ 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): 0 30 PPM/C (-55C to +125C) INSULATION RESISTANCE (IR): 1 pF to 2200 pF: 105 Megohms min. @ +25C at 500 VDC. 104 Megohms min. @ +125C at 500 VDC. WORKING VOLTAGE (WVDC): DIELECTRIC WITHSTANDING VOLTAGE (DWV): * See page 2. RETRACE: Less than (0.02% or 0.02 pF), whichever is greater. AGING EFFECTS: None THERMAL SHOCK: PIEZOELECTRIC EFFECTS: None MIL-STD-202, Method 107, Condition A. (No capacitance variation with voltage or pressure). MOISTURE RESISTANCE: CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is MIL-STD-202, Method 106. greater. LOW VOLTAGE HUMIDITY: OPERATING TEMPERATURE RANGE: MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. TERMINATION STYLES: From -55C to +125C (No derating of working voltage). LIFE TEST: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. MIL-STD-202, Method 108, for 2000 hours, at 125C. Voltage applied. 1 pF to 680 pF: at WVDC 820 pF to 2200 pF: 120% of WVDC TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 10 lbs. min., 25 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-943 Rev. D 2/05 ATC 700 E Capacitance Values CAP. CODE CAP. (pF) 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 TOL. C, D RATED WVDC STD. EXT. 3600 7200 J, K, M CAP. CODE CAP. (pF) 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 RATED WVDC STD. EXT. TOL. 3600 CAP. CODE CAP. (pF) 331 391 471 561 681 821 102 122 152 182 222 330 390 470 560 680 820 1000 1200 1500 1800 2200 7200 J, K, M RATED WVDC TOL. 3600 2500 J, K, M 1000 5000 3600 VRMS = 0.707 x WVDC * * * * SPECIAL VALUES, TOLERANCES, MATCHING, AND CAPACITOR ASSEMBLIES ARE AVAILABLE. ATC'S CUSTOM POWER CAPACITOR ASSEMBLY CATALOG, ATC # 001-900 LISTS ASSEMBLY OPTIONS. EXTENDED WORKING VOLTAGES ARE AVAILABLE FOR COMMERCIAL ORDERS ONLY. ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY. pF to 680 pF: 120% of rated WVDC for 5 secs. * DWV: 1820 pF to 2200 pF: 150% of rated WVDC for 5 secs. CAPACITANCE TOLERANCE Code C J D K M Tol. 0.25 pF 0.5 pF 5% 10% 20% ATC PART NUMBER CODE ATC700 E 39 1 K W 3600 X C Series Packaging C - ATC Waffle-pack (Standard) B - Bulk Packaging (packed in plastic bags) I - Special Packaging. Consult Factory Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. Laser Marking WVDC Capacitance Tolerance Termination Code The above part number refers to a 700 E Series (case size E) 390 pF capacitor, K tolerance (10%), 3600 WVDC, with W termination (Tin /Lead, Solder Plated over Nickel Barrier), laser marking and Waffle-packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N 2 w Consult factory for additional performance data. T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w For additional information and catalogs contact your ATC representative or call direct at (631) 622-4700. C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC 700 E Capacitors: Mechanical Configurations ATC ATC SERIES TERM. & CASE CODE SIZE E 700E W/T IS A TERMINATION SURFACE LENGTH (L) Y W W L Solder Plate E 700E BODY DIMENSIONS Inches (mm) OUTLINES CASE SIZE & TYPE T Y P W L Pellet T T W Lead-Free Solderable Nickel Barrier L T CA W E Gold Chip L T .380 +.040 -.010 (9.65 +1.02 -0.25) Heavy Tin/Lead Coated, over Nickel Barrier Termination Lead-Free and RoHS Compliant Tin Plated over Nickel Barrier Termination Lead-Free and RoHS Compliant .380 .010 (9.65 0.25) LL MS WL .170 (4.32) max. .040 (1.02) max. W Microstrip L T AR WL W Axial Ribbon L 700E LL * * AW W L Axial Wire Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 1.0 (25.4) min. LL * * RW * Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 2.25 (57.2) min. T E 700E (0.25 0.13) Leads are Attached with High Temperature Solder. .380 +.035 -.010 (9.65 +0.89 -0.25) T E T L Radial Wire High Purity Silver Leads (8.89 0.25) TL = .010 .005 LL 700E Gold Plated over Nickel Barrier Termination LL = .750 (19.05) min. WL = .350 .010 TL E MATERIALS Tin /Lead, Solder Plated over Nickel Barrier Termination TL E 700E OVERLAP (Y) .380 +.015 -.010 (9.65 +0.38 -0.25) .380 +.015 -.010 (9.65 +0.38 -0.25) Y 700E THICKNESS (T) .380 +.015 -.010 (9.65 +0.38 -0.25) Y E 700E WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS W Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. A M E R I C A N 3 T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC 700 E Capacitors: Non-Magnetic Mechanical Configurations BODY DIMENSIONS Inches (mm) OUTLINES ATC ATC SERIES TERM. & CASE CODE SIZE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) E WN W Non-Mag Solder Plate L T E PN W Non-Mag Pellet L T W Non-Mag Lead-Free Solderable Barrier L T 700E WL W Non-Mag Microstrip L T .170 (4.32) max. High Purity Silver Leads .040 (1.02) max. LL = .750 (19.05) min. WL = .350 .010 (8.89 0.25) TL = .010 .005 LL WL W L E T LL * * BN Non-Mag Axial Wire W L (0.25 0.13) Leads are Attached with High Temperature Solder. .380 +.035 -.010 (9.65 +0.89 -0.25) * Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 2.25 (57.2) min. T Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 1.0 (25.4) min. LL 700E E RN Non-Mag Radial Wire * * T L W Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. Suggested Mounting Pad Dimensions T L W L W 9 3 K 391K 1 T Horizontal Electrode Orientation Vertical Mount Vertical Electrode Orientation B A Case E B Horizontal Mount Pad Size Normal A Min. B Min. C Min. D Min. .185 .050 .325 .425 High Density .165 .030 .325 .385 Normal .405 .050 .325 .425 High Density .385 .030 .325 .385 C D A M E R I C A N 4 T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-8366-4318 * sales@atceramics-asia.com . c o m TRIM LINE AN Non-Mag Axial Ribbon 700E Tin Plated over Non-Magnetic Barrier Termination TL E 700E Lead-Free and RoHS Compliant .380 .010 (9.65 0.25) LL MN Heavy Tin/Lead Coated, over Non-Magnetic Barrier Termination -0.25) TL E Tin/Lead, Solder Plated over Non-Magnetic Barrier Termination .380 +.015 -.010 (9.65 +0.38 Y TN MATERIALS -0.25) E 700E OVERLAP (Y) .380 +.040 -.010 (9.65 +1.02 Y 700E THICKNESS (T) .380 +.015 -.010 (9.65 +0.38 -0.25) Y 700E WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS ATC 700 E Performance Data ESR VS. CAPACITANCE ATC SERIES 700, CASE E Q VS. CAPACITANCE ATC SERIES 700,700, CASE E E ATC SERIES CASE 100000 1 30 MHz 0.1 30 MHz Q ESR (Ohms) 10000 1000 (Typical) (Typical) 0.01 1 10 100 1 1000 100 TRIM LINE CAPACITANCE (pF) (1.0 pF to 400 pF) 1000 100 10 CAPACITANCE (pF) (1.0 pF to 400 pF) ESR VS. CAPACITANCE ATC SERIES 700, CASE E Q VS. CAPACITANCE ATC SERIES 700, CASE E , 0.1 ) 1000 30MHz 0.01 QQ ( ESR (Ohms) 30 MHz 100 (Typical) (Typical) 0.001 100 1000 10 100 10000 1000 CAPACITANCE (pF) (430 pF to 2200 pF) CAPACITANCE (pF) (430 pF to 2200 pF) A M E R I C A N 5 T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w 10000 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-8366-4318 * sales@atceramics-asia.com . c o m ATC 700 E Performance Data SERIES RESONANCE VS. CAPACITANCE ATC SERIES 700, CASE E CAPACITANCE CHANGE VS. TEMPERATURE ATC SERIES 700, CASE E 10000 1 TCC= 0 30 PPM/C % CHANGE IN CAPACITANCE FREQUENCY (MHz) 0.8 1000 100 (Typical) 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 -1 10 1 10 100 1000 -55 10000 25 45 65 85 105 CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE E CURRENT RATING VS. CAPACITANCE ATC SERIES700, 700,CASE CASEE E ATC SERIES 125 100 The current rating is based on an 85 C mounting surface with a thermal resistance of 12 C/W. A power dissipation of 5 W will result in a case temperature of 125 C. RMS CURRENT (Amps) RMS CURRENT (Amps) 5 CAPACITANCE (pF) The current rating is based on a 65C mounting surface and a device thermal resistance () of 12C/W. A power dissipation of 5W will result in a case temperature of 125C. 10 0.1 1 -15 TEMPERATURE (D C) TEMPERATURE (Degrees C) 100 1 -35 30 MHz 10 MHz 2 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 10 100 10 MHz 30 MHz 10 2 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 1 100 1000 1000 10000 CAPACITANCE (pF) (430 pF to 2200 pF) CAPACITANCE (pF) (1.0 pF to 400 pF) CURRENT RATING VS. CAPACITANCE ATC SERIES 700, CASE E, EXTENDED VOLTAGE 100 RMS CURRENT (Amps) The current rating is based on an 85 C mounting surface with a thermal resistance of 12 C/W. A power dissipation of 5 W will result in a case temperature of 125 C. 10 30 MHz 10 MHz 2 MHz 1 Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 0.1 1 10 100 1000 CAPACITANCE CAPACITANCE (pF) (1.0 pF to 180 pF) Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. A 10/03). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/aboutatc/terms_conditions_sale.html ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. (c) 1996 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-943 Rev. D 2/05