3" (76mm) SPECIFICATIONS 1 1/8" (29mm) * Vinyl Badge Holder Material Thickness: 0.020" (0.51mm) (3S) front, & 0.020" (0.51mm) (6S) back Material Tolerance (thickness): 10% Material Color: clear front & matte back OPENING * Includes a 1/8" (3mm) x 9/16" (14mm) punch through slot, and two 3/16" (5mm) diameter hang holes located 3/8" (10mm) from the top 3 7/8" (98mm) 5" (127mm) * 3" (76mm) x 5" (127mm) (Outer Dimension) * Opening located 1 1/8" (29mm) from top * Embossed with Menda & Made In America along the top header CARD INSERT 2 5/8" (67mm) Specifications and procedures are subject to change without notice 1/16" tolerances on dimensions unless specified VERTICAL BADGE HOLDER WITH FLAP CLOSURE, 2 5/8" (67MM) x 3 7/8" (98MM) INSERT SIZE 3651 WALNUT AVENUE, CHINO, CA 91710 PHONE: (909) 627-2453 FAX: (951) 755-8848 WEBSITE: Menda-ID.com (c) 2011 DESCO INDUSTRIES INC. Employee Owned MADE IN AMERICA DRAWING NUMBER 35044 DATE June 2011