THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT DATA SHEET CRYSTAL CONTROLLED OSCILLATORS 14 PIN 5.0V HCMOS VCXO SURFACE MOUNT GULL WING HIGH FREQUENCY CW 0632 JHV54-150G 34.368M ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature TABLE 1.0 UNITS MINIMUM -55 NOMINAL - MAXIMUM 125 UNITS C Supply Voltage (Vcc) -0.5 - 7 Vdc Control Voltage (Vc) -0.5 - 7 Vdc NOTE MODEL SPECIFICATIONS MODEL NUMBER TABLE 2.0 JHV51-xxxG Frequency Stability: -25 - 25 ppm 1 JHV52-xxxG Frequency Stability: -50 - 50 ppm 1 JHV53-xxxG Frequency Stability: -100 - 100 ppm 1 JHV54-xxxG Frequency Stability: -20 - 20 ppm 1 JHV55-xxxG Frequency Stability: -10 - 10 ppm Pullability Codes (xxx - Add code to the Model Number) 1 TABLE 3.0 050 Frequency Pullability: 25 - - ppm 2 100 Frequency Pullability: 50 - - ppm 2 150 Frequency Pullability: 75 - - ppm 2 160 Frequency Pullability: 80 - - ppm 2 200 Frequency Pullability: 100 - - ppm 2, 3 300 Frequency Pullability: 150 - - ppm OPERATING SPECIFICATIONS MINIMUM NOMINAL MAXIMUM UNITS (Fo) 30 - 100 MHz 0 - 70 C Supply Voltage (Vcc) 4.75 5.0 5.25 Vdc Supply Current < 50 MHz (Icc) - - 35 mA Supply Current > 50 MHz (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 ps rms Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset - -90 -100 -125 -135 1 - ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz MINIMUM NOMINAL MAXIMUM UNITS 0.5 2.0 -15 15 2.5 2.5 50K - 4.5 3.0 15 - Vdc Vdc % Ohm KHz NOMINAL - MAXIMUM 15 0.5 UNITS pF Vdc Vdc - 8 mA mA Frequency Range Operating Temperature Range INPUT CHARACTERISTICS PARAMETER Control Voltage Range Center Frequency Monotonic Linearity Input Impedance (Vc) Modulation Bandwidth (3dB) HCMOS OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) (Voh) (Vol) (High) (Low) (Ioh) (Ioh) -8 - Current (52.1 to 100 MHz) (High) (Ioh) -16 - - mA (52.1 to 100 MHz) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% (Low) (Ioh) 40 - 50 - 16 60 3 mA % nS 45 50 55 % Optional Duty Cycle: measured at 50% Vcc PACKAGE CHARACTERISTICS Package Solder Process NOTE DESCRIPTION The Connor-Winfield JHV5xxxxG series is a 5.0V HCMOS, 14 Pin DIP hermetically sealed gull wing surface mount package , Voltage Controlled Crystal Oscillator (VCXO). Based on a fundamental crystal design the JHV5x-xxxG is designed for phased lock loop applications requiring low jitter and tight frequency stability. FEATURES TABLE 5.0 NOTE TABLE 6.0 MINIMUM 4.5 - Current (30 to 52 MHz) (30 to 52 MHz) 2, 4 TABLE 4.0 PARAMETER JHV51-xxxG Series JHV52-xxxG Series JHV53-xxxG Series JHV54-xxxG Series JHV55-xxxG Series NOTE 5.0V OPERATION FREQUENCY RANGE: 30 to 100 MHz FREQUENCY STABILITY JHV51-xxxG SERIES 25PPM JHV52-xxxG SERIES 50PPM JHV53-xxxG SERIES 100PPM JHV54-xxxG SERIES 20PPM JHV55-xxxG SERIES 10PPM TEMPERATURE RANGE: 0 to 70C LOW JITTER <1ps RMS SURFACE MOUNT GULL WING HERMETICALLY SEALED PACKAGE RoHS COMPLIANT / LEAD FREE ORDERING INFORMATION 5 TABLE 7.0 Hermetically sealed, metal package. RoHS Compliant / Lead free, see the solder profile on page 2. JHV54-150G - 034.368M Specifications subject to change without notice. DATA SHEET #: Vx598 PAGE 1 OF 2 REV: 00 DATE: 01/10/08 a Copyright 2008 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT DATA SHEET CRYSTAL CONTROLLED OSCILLATORS Note: 1) Frequency stability vs. change in temperature, referenced to frequency measured at 25C with control voltage @ 2.50Vdc. 2) Referenced to Fo @ 25C. Positive Slope. 3) +/-100ppm frequency deviation is not available above 75 MHz. 4) +/-150ppm frequency deviation is not available above 50 MHz. 5) Add "S" to the end of the part number, Example: JHV54-150GS-034.368M. Example Part Number JHV54 - 150G - 34.368 MHz GULL WING 75 Pin Connections Test Circuit 15pF Suggested Pad Layout Package Outline Solder Profile Temperature 260C 260C 220C 180C 150C 120C 0 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. Dimensional Tolerance: .008" (.2mm) Specifications subject to change without notice. DATA SHEET #: Vx598 PAGE 2 OF 2 REV: 00 DATE: 01/10/08 a Copyright 2008 Connor-Winfield all rights reserved.