GEG.2E.240.LC - LEMO - Datasheet.Directory

unipole & multipole

connectors

No reproduction or use without express permission of editorial or pictorial content, in any manner.

LEMO reserve the right at all times to modify and improve specifications without any notification.

1www.lemo.com

®®

LEMO unipole and multipole connectors

Table of Contents

This catalogue gives the complete description of LEMO unipole and multipole type connectors. The LEMO manufacturing

programme has been extended to almost 40 series divided into 7 product families with specific mating and environmental

characteristics. Each series includes a wide variety of plug, socket, coupler and bridge plug models, available in contact

configurations adapted to all round cables, including up to 114 conductors, and a maximum diameter of 30 mm.

Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened and designed to

guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electro-

magnetic compatibility (EMC) is important.

3 steps to select the right connector ................................................................................................................................................................................ 3

B Series (indoor, keyed)

Part Numbering system ........................................................................................................................................................................................ 13

Metal Housing models ........................................................................................................................................................................................... 14

Elbow socket models ............................................................................................................................................................................................. 25

Plastic housing models .......................................................................................................................................................................................... 28

Watertight or vacuumtight models ......................................................................................................................................................................... 30

Bridge models ........................................................................................................................................................................................................ 34

Threaded-latching models ..................................................................................................................................................................................... 35

Alignment Key and Polarized Keying System ........................................................................................................................................................ 36

K Series (outdoor, keyed)

Part Numbering system ......................................................................................................................................................................................... 38

Metal Housing models ........................................................................................................................................................................................... 39

Watertight or vacuumtight models ......................................................................................................................................................................... 47

Alignment Key and Polarized Keying System ........................................................................................................................................................ 49

T Series (outdoor, keyed)

Part Numbering system ......................................................................................................................................................................................... 52

Metal Housing models ........................................................................................................................................................................................... 53

Watertight or vacuumtight models ......................................................................................................................................................................... 55

Plastic housing models .......................................................................................................................................................................................... 56

B, K and T Series Insert configuration, Housings, Insulators, Contacts, Collets, Variant .................................................................................... 57

S Series (indoor, stepped insert)

Part Numbering system ........................................................................................................................................................................................ 75

Metal Housing models ........................................................................................................................................................................................... 76

Elbow socket models ............................................................................................................................................................................................. 87

Plastic housing models .......................................................................................................................................................................................... 89

Watertight or vacuumtight models ......................................................................................................................................................................... 91

E Series (outdoor, stepped insert)

Part Numbering system ......................................................................................................................................................................................... 94

Metal Housing models ........................................................................................................................................................................................... 95

Watertight or vacuumtight models ....................................................................................................................................................................... 101

S, and E Series Insert configuration, Housings, Insulators, Contacts, Collets, Variant ...................................................................................... 103

M Series (outdoor, keyed).............................................................................................................................................................................................. 123

F Series (outdoor, keyed) .............................................................................................................................................................................................. 125

Spare parts ...................................................................................................................................................................................................................... 127

Accessories .................................................................................................................................................................................................................... 137

Tooling ............................................................................................................................................................................................................................. 151

Panel cut-outs and PCB drilling pattern ....................................................................................................................................................................... 157

Cable assembly (B, K, T, S and E series)....................................................................................................................................................................... 169

Technical characteristics............................................................................................................................................................................................... 182

Product safety notice ..................................................................................................................................................................................................... 198

2 www.lemo.com

®®

Precision modular connectors to suit your application

Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull

connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in

more than 80 countries with the help of over 40 subsidiaries and distributors.

Over 75000 connectors

The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of

handling cable diameters up to 30 mm and for up to 114 contacts.

This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most

markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommuni-

cations and military.

LEMO’s Push-Pull Self-Latching Connection System

The LEMO self-latching system allows the connector

to be mated by simply pushing the plug axially into

the socket.

This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute

security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.

UL Recognition

LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO

connector, cable and your equipment) will be easier because LEMO connectors are recognized.

CE marking

CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or

several European safety directives. CE marking applies to complete products or equipment, but not to electrome-

chanical components, such as connectors.

RoHS

LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parlia-

ment and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical

and electronic equipment marketed in Europe.

Once firmly latched, connection cannot be broken by

pulling on the cable or any other component part other

than the outer release sleeve.

When required, the connector is disengaged by a

single axial pull on the outer release sleeve.

This first disengages the latches and then withdraws

the plug from the socket.

3www.lemo.com

®®

lStep 1: Select connector series

Select the appropriate LEMO connector series according to the environmental parameters that will affect your device

or cable such as indoor, outdoor, temperature range, ingress protection of the mated connector and of your device.

Use the table shown on page 4.

Part number coding

B, K, T, S or E

lStep 2: Select connector size

Use the section (mm2) or the AWG of your cable wire to select the optimal contact diameter (values vary between

solder, crimp or print contact), see page 8.

Use this optimal contact diameter to determine the right connector size as well as the insert configuration, see page 6.

0, 1, 2, 3, 4, 5 or 6

lStep 3: Complete the part number

Now that you know the series, as well as the insulator configuration, complete the part numbering system with the help

of the following table.

Model Series Contact Collet Variant

Housing

material

Insert

configuration Insulator

material

14 14 57 64 64 64 67 71

39 39 57 64 64 64 68 71

53 53 57 64 64 64 70 71

76 76 103 112 112 112 115 121

95 95 103 112 112 112 119 121

B Series (indoor, keyed)

K Series (outdoor, keyed)

T Series (outdoor, keyed)

S Series (indoor, stepped insert)

E Series (outdoor, stepped insert)

3 steps to select the right connector

Note: Figures in the above table refer to the catalogue pages.

Part number coding

.. .

4 www.lemo.com

®®

Series

Environment

Ingress protection 1)

Ingress protection 2)

Temperature range

Latching

Shell sizes

Insulator type

Contact type

Features

Page

00 multipole

BK T 00 unipole

S

Solder, crimp or print Solder, crimp or print

Push-Pull self-latching

8 metal

and 4 plastic 6 metal 7 metal

and 5 plastic 6 metal

Multipole

E

11 to 36 37 to 50 73 to 92 93 to 102

Unipole or multipole

hermaphroditic

indoor indoor outdoor or

harsh environment

IP50 IP66 to IP68 IP50 IP66 to IP68

- 55 to 250°C - 55 to 200°C - 55 to 250°C - 55 to 200°C

IP50 to IP68

vacuumtight IP66 to IP68

vacuumtight IP50 to IP68

vacuumtight IP66 to IP68

vacuumtight

13 keyways 9 keyways Stepped insert

LEMO unipole and multipole connectors

The standard keyed Series (B, 00)

The characteristic feature of these connector series is a keying system which allows higher contact density and prevents all

errors in alignment. The various keying alternatives prevent unwanted cross mating of otherwise similar connectors. It is

also possible to use crimp contacts to reduce cable assembly time. These connector series, include the 0B to 5B range as

well as the 00 multipole, some vacuumtight models are also available.

The watertight keyed Series (K, T)

These series are watertight when mated and assembled to an appropriate cable. They include the 0K to 5K series and the

TT to 3T series, available in the same types as the 0B to 5B series.

The standard Series (S, 00)

The characteristic feature of these connector series is the hermaphroditic insulator in the multipole version. They include

principally the 0S to 6S series, as well as the 00 unipole series.

The watertight Series (E)

These series are watertight when mated and assembled to an appropriate cable. They include the 0E to 6E series and are

available in the same types as the S series.

outdoor or harsh environment

5 metal

51 to 56

4 keyways

Note:

1) Mated connector. See ingress protection code p. 5. 2) Your device. For selection of connectors for watertight and vacuumtight devices, see p. 5.

Step 1: Select Connector Series

5www.lemo.com

®®

Selection of connectors for watertight or vacuumtight devices

LEMO B and S series are rated IP50 only when mated. LEMO E, K and T series are rated IP66 (and over) only when

mated. If a device must be watertight or vacuumtight when the connectors are unmated, it is important to select a water-

tight or vacuumtight socket. You can consider the following two situations:

Fig. 1 Fig. 2

FGG plug K series

EGG socket K series FGG plug B series

HGG socket B series

epoxy

resin seal

your device

Definition of Ingress Protection (IP code)

IEC 60529 outlines an international classification system

for the sealing effectiveness of enclosures of electrical

equipment against the intrusion into the equipment of for-

eign bodies (i.e. tools, dust, fingers) and moisture. This

classification system utilizes the letters «IP» (Ingress Pro-

tection) followed by two digits.

Example: IP 50 = IP 5 0

IP letter code

1st digit

2nd digit

Degrees of protection - First digit

The first digit of the IP code indicates the degree to which

persons are protected against contact with moving parts

and the degree that equipment is protected against solid

foreign bodies intruding into an enclosure.

Degrees of protection - Second digit

The second digit indicates the degree of protection of the

equipment inside the enclosure against the harmful entry

of various forms of moisture (e.g. dripping, spraying, sub-

mersion, etc.)

First digit description

Code

your device

A) Figure 1 shows a typical outdoor device. To ensure this

device retains IP66 or above when connectors are

unmated, it is important to choose a watertight socket

from B, S, E, K or T series.

B) Figure 2 shows a device which is subjected to pressure

difference such as a near vacuum or pressurized gas

and must exhibit no leakage. To ensure the device

maintains its sealing, the socket is additionally tested for

helium leakage (according MIL 1344A).

Check temperature range (see section on pages 30, 47, 55, 91 and 101).

No special protection0

Protection from a large part of the body such as hand

or from solid objects greater than 50 mm in diameter

1

Protection against objects not greater than 80 mm in length

and 12 mm in diameter

2

Protection from entry by tools, wires, etc.,

with a diameter or thickness greater than 2.5 mm

3

Protection from entry by solid objects

with a diameter or thickness greater than 1.0 mm

4

Protection from the amount of dust that would interfere

with the operation of the equipment

5

Dust-tight6

–7

–8

Second digit description

Code

No special protection0

Protection from vertically dripping water1

Protection from dripping water when tilted up to 15°2

Protection from sprayed water3

Protection from splashed water4

Protection from water projected from a nozzle5

Protection against heavy seas, or powerful jets of water6

Protection against temporary immersion7

Protection against complete continuous submersion in water8

0.5 0.9 1.3 2.0 3.0 6.0 0.9 1.3 1.6 2.0 4.0 6.0

0.5 0.9 1.3 1.6 2.0 0.7 0.9 1.3 2.0 3.0 6.0/4.0 6.0

0.5 0.7 0.9 1.3 2.0 3.0 4.0 0.7 0.9 1.3 2.0 3.0 4.0 8.0

0.35 0.7 0.9 1.3 1.6 0.9/0.7 1.3 2.0/1.3 3.0/2.0 4.0/3.0

0.35 0.5 0.7 1.3 1.6 2.0 0.7 1.3 1.3 2.0 3.0

0.5 0.7 1.3 1.6 2.0 1.3/0.9 1.3 2.0/1.3

0.7 0.9 1.3 0.9 1.3 1.3 3.0

0.5 1.3/2.0 1.3

0.5 0.9 1.3 1.6 3.0 0.9 1.3 1.3 2.0

0.35 0.7 0.7 0.9 1.3 0.9 1.3 2.0 4.0/5.0

0.9 1.3

0.5 0.7 0.9 2.0 0.9 1.3 3.0/2.0

0.5 0.7 0.9 0.9 2.0 0.9 0.9 2.0 3.0

0.7 0.9 0.9 0.9 3.0/1.6 4.0

0.7

0.7 0.9 1.6 0.9 1.6 3.0

0.5 0.7 0.9 3.0/1.6

0.7 0.9 0.9 1.6

0.5 0.7

1.3

1.6

2.0

3.0 3.0

4.0 4.0 4.0

6.0 6.0

12.0

6 www.lemo.com

®

Number of contacts

00-TT

0B-0K-0T

1B-1K-1T

XB

2B-2K-2T

3B-3K-3T

4B-4K

5B-5K

00

0S-0E

1S-1E

2S-2E

3S-3E

4S-4E

5S-5E

6S-6E

Series

Insert configuration

113

116

120

130

140

160

112

Select the right connector size and insert configuration

To be able to select the right connector size (0 to 6), it is important to define the contact diameter (ø A).

Find out the available contact diameter (ø A) of the LEMO connector depending on the number of contacts required and

depending on the rating required (see pages 57 to 63 and 103 to 111).

The following table shows the contact diameter (ø A).

Unipole

302

303

304

305

306

307

308

309

310

312

313

314

316

318

319

320

322

324

326

1

2

3

4

5

6

7

8

9

10

12

13

14

16

18

19

20

22

24

26

Multipole

Step 2: Select Connector Size

7www.lemo.com

®®

Number of contacts

Insert configuration

330

332

336

340

344

348

350

354

360

362

364

372

106

Note: 1)2.0 is for 6S series, for 6E the values are 1.3 and 5.0.

Multipole

30

32

36

40

44

48

50

54

60

62

64

72

106

00-TT

0B-0K-0T

1B-1K-1T

XB

2B-2K-2T

3B-3K-3T

4B-4K

5B-5K

00

0S-0E

1S-1E

2S-2E

3S-3E

4S-4E

5S-5E

6S-6E

Series

0.7 0.9 1.3 1.3 2.0

0.5 2.0

1.3 2.01)

0.7 1.3 1.3 2.0

1.3

0.7 1.3 1.3 2.0

0.9

1.6

0.9 1.3

1.3

0.9

8 www.lemo.com

®®

Verify if the selected contact diameter (ø A) of the LEMO connector fits to your cable wire diameter (AWG number or

max. available section).

Note:

1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).

2) for 00/TT multipole series.

3) for S, E series.

4) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductor

diameter is smaller than ø C.

5) for 00 /TT multipole series or for 0B/0T and 1B/1T series with male contacts.

6) for 0B.302/0B.303, 0K.302/0K.303 and 0T.302/0T.303 ø C = 1.0 mm, AWG max 20, section max (mm2) 0.50.

7) for 00/TT and 1B/1K/1T series, according to manufacturing and plating tolerance ø C min = 0.43 mm.

Verify the fitting to your wire

Conductor

Solid Stranded

AWG Section (mm2)

min. max. min. max.

Fr1)

(N)

AWG

max. Section

max.

(mm2)

Contact

ø A ø C Form

(mm) (mm) per fig.

0.55) 0.45 1

0.7 0.80 1

0.7 0.45 2

0.9 1.10 1

0.9 0.80 2

0.9 0.45 2

1.3 1.40 1

1.3 1.10 2

1.3 0.80 2

1.6 1.90 1

1.6 1.40 2

2.0 2.40 1

2.0 1.90 2

3.0 3.20 1

4.0 4.00 1

Notes

l

– – 32 28 0.035 0.09 12

– – 26 224) 0.140 0.34 22

– – 32 28 0.035 0.09 22

– – 24 20 0.250 0.50 30

– – 26 224) 0.140 0.34 30

– – 32 28 0.035 0.09 30

– – 20 18 0.500 1.00 40

– – 24 20 0.250 0.50 40

– – 26 224) 0.140 0.34 40

– – 18 144) 1.000 1.50 50

– – 22 18 0.340 1.00 50

– – 16 124) 1.500 2.50 65

– – 18 14 1.000 1.50 65

– – 14 104) 2.500 4.00 75

– – 12 10 4.000 6.00 90

28 0.09 – 30 – 0.05 –

28 0.09 – 28 – 0.09 –

24 0.25 – 26 – 0.14 –

22 0.34 – 224) – 0.34 –

226) 0.346) – 224)6) – 0.346) –

20 0.50 – 204) – 0.50 –

16 1.00 – 18 – 1.00 –

14 1.50 – 16 – 1.50 –

10 4.00 – 12 – 4.00 –

10 6.00 – 10 – 6.00 –

– – – 8 – 10.00 –

– – – 4 – 21.00 –

– – – 0 – 50.00 –

l

0.35 0.40 –

0.52) 0.402) –

0.5 0.457) –

0.73) 0.603) –

0.7 0.80 –

0.9 0.806) –

1.3 1.00 –

1.6 1.40 –

2.0 1.80 –

3.0 2.70 –

4.0 3.70 –

5.0 5.20 –

6.0 5.20 –

8.0 7.00 –

12.0 11.50 –

Contact type

ø A

ø C

ø A

ø C

ø A

ø C

ø A ø C

fig. 1

fig. 2

Solder

Crimp

lFirst choice alternative lSpecial order alternative

9www.lemo.com

®®

Note:

1) for multipole only.

2) for unipole only.

3) for these series the maximum cable diameter require models with oversized cable collet (type K).

Cable diameter range (mm)

Collet for fitting

Collet

a bend relief

min. max. min. max.

Cable diameter range (mm)

Collet for fitting

Collet

a bend relief

min. max. min. max.

SeriesSeries

Verify if the selected connector size fits to your cable diameter.

Verify the fitting to your cable

1.3 4.4 1.3 4.4

1.3 6.23) 1.3 6.23)

1.4 8.73) 1.4 8.73)

1.3 10.53) 1.3 10.53)

2.6 13.03) 2.6 13.03)

4.1 22.03) 4.1 13.0

6.1 30.0 – –

11.1 30.0 – –

002)

0S

1S

2S

3S

4S

5S

6S

1.0 5.0 1.0 5.0

1.3 8.53) 1.3 8.53)

1.3 10.53) 1.3 10.53)

2.6 15.03) 2.6 15.03)

4.8 23.53) 4.8 15.0

9.6 23.5 – –

13.0 30.0 – –

0E

1E

2E

3E

4E

5E

6E

Cable diameter range (mm)

Collet for fitting

Collet

a bend relief

min. max. min. max.

Series

1.4 3.5 1.4 3.5

1.4 5.6 1.4 5.2

2.2 7.6 2.2 7.2

4.4 8.0 4.4 7.0

1.4 9.9 1.4 9.2

4.2 11.9 4.2 11.0

4.9 16.0 4.9 15.0

9.6 25.0 9.6 15.5

001)

0B

1B

XB

2B

3B

4B

5B

1.0 5.0 1.0 5.0

1.3 8.53) 1.3 8.53)

1.3 10.53) 1.3 10.53)

2.6 15.03) 2.6 15.03)

4.6 23.53) 4.6 15.0

9.6 23.5 – –

0K

1K

2K

3K

4K

5K

2.4 3.0 2.4 3.0

1.0 5.0 1.0 5.0

1.3 6.5 1.3 6.5

1.3 8.5 1.3 8.5

2.6 10.5 2.6 10.5

TT

0T

1T

2T

3T

L dimensions and C are detailed in the section on PCB drilling pattern.

See page 163 and 167.

L dimensions and C are detailed in the section on PCB drilling pattern.

See page 164 and 168.

l

ø A ø C

ø C

ø A

L

ø C

L

ø A

Print

Print (elbow)

Verify if the selected contact diameter (ø A) of the LEMO connector fits to your cable wire diameter (AWG number or

max. available section).

Verify the fitting to your wire

Conductor

Solid Stranded

AWG Section (mm2)

min. max. min. max.

Fr1)

(N)

AWG

max. Section

max.

(mm2)

Contact

ø A ø C Form

(mm) (mm) per fig.

Notes

Contact type

Note: 1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).

10 www.lemo.com

®®

T SERIES (watertight)

K SERIES (watertight)

B SERIES

FIG

*

FGG

FFG

FGG

FEG

FNG

JGG

FDG

EJG

*

R



EPG

EZG

CFF, CRG

PHG

PNG

FGGFGG

FGY

FTG

*

ENG

ENY

FAG FWG EGG

EHG

EKG

*

ENG

ESG

*

EEG

ECG

EFG

ECG

EYG

XPF

*

XBG, EXG

PEG

PKG

PFG

S



YHG

HCG

HGG HHG

HNG HMG

HEG FVG

FVB

ESG

XRB

FHG

FKG

*

FPG

FSG

FMG

*

B Series

B series connectors provide the following main features:

– security of the Push-Pull self-latching system – multipole types 2 to 64 contacts

– solder, crimp or print contacts (straight or elbow) – high packing density for space savings

– multiple key options to avoid cross mating – keying system («G» key standard)

of similar connectors for connector alignment

– 360° screening for full EMC shielding.

Fixed plugs Straight plugs Fixed sockets Free sockets

Elbow plugs

Fixed sockets

Fixed coupler

Fixed socketsStraight plugs

Elbow sockets

Bridge plugsPlug with two

parallel sockets

Plastic housing models (page 28)

Metal housing models (page 14)

Bridge models (page 34)

Elbow socket models (page 25)

Fixed plug Fixed sockets Fixed coupler

Watertight or vacuumtight models (page 30)

Straight plugs Fixed socket

Elbow socket

Threaded-latching models (page 35)

12 www.lemo.com

®

Note: * Contact LEMO for details.

1

345

2

6

7

4

3

6

7

5

2

1

4

3

6

5

7

2

1

1 6 5427 3

13www.lemo.com

®®

Part Section Showing Internal Components

Fixed socket

outer shell

earthing crown

retaining ring

hexagonal nut

locking washer

insulator

female contact

Straight plug

outer shell

latch sleeve

collet nut

split insert carrier

insulator

male contact

collet

FGG.1B.306.CLAD62 = straight plug with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell in chrome-plated

brass, PEEK insulator, male solder contacts, D type collet for 6.0 mm diameter cable.

EGG.1B.306.CYM = fixed socket, nut fixing, with key (G), 1B series, multipole type with 6 contacts, outer shell in chrome-plated brass,

PEEK extended insulator, female crimp contacts.

RJG.1B.306.CLA = straight fixed coupler with keys (J) at the flange end and key (G) at the other end, 1B series, multipole type with 6

contacts, outer shell in chrome-plated brass, PEEK insulator, male-female contacts.

PHG.1B.306.CLLD62Z = free socket with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell in chrome-

plated brass, PEEK insulator, female solder contacts, D type collet for 6.0 mm diameter cable and nut for fitting a bend relief.

Fixed socket

Part Numbering System

Plug F G G 1B

Cable ø: (page 67)

Collet type: (page 67)

Variant: (page 71)

3 0 6

Insert configuration: (page 57)

Alignment key: (page 36)

Model: (page 14)

Series: (page 14)

C L A D 6 2

Contact: (page 64)

Insulator: (page 64)

Housing: (page 64)

Variant: (page 71)

...

Free socket Z

P H G 1B 3 0 6 C L L D 6 2

.. .

E G G 1B 3 0 6 C Y M

.. .

Coupler R J G 1B 3 0 6 C L A

.. .

14 www.lemo.com

~M

~L

ø A

S 1

S 2

~M

~L

S 1

ø A

Note: 1) the surface design of the 00 series is different.

Metal housing models

Technical Characteristics

Electrical

Note:

the various tests have been carried out with FGG and EGG connector

pairs, with chrome-plated brass shell and PEEK insulator.

Detailed electrical characteristics, as well as materials and treatment are

presented in the chapter Technical Characteristics on page 182.

1) see page 189, contact resistance after mating cycles. See page 185,

mechanical endurance latching force.

2) for chrome plated product (« C » material code).

Mechanical and Climatical

Characteristics Value Standard

> 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 55° C, + 250° C

10-2000 Hz, 15g IEC 60512-4 test 6d

100 g, 6 ms IEC 60512-4 test 6c

> 1000h IEC 60512-6 test 11f

IP 50 IEC 60529

55/175/21 IEC 60068-1

Endurance1)

Humidity

Temperature range

Resistance to vibrations

Shock resistance

Salt spray corrosion test2)

Protection index (mated)

Climatical category

Characteristics Value Standard

> 75 dB IEC 60169-1-3

> 40 dB IEC 60169-1-3

Shielding

efficiency

FGG Straight plug, key (G) or keys (A…M and R), cable collet

FGG Straight plug, key (G) or keys (A…M), cable collet and nut for fitting a bend relief 2)

Note: 1) the surface design of the 00 series is different.

M1 Cable assembly (page 169)

6.4 28.5 20.5 5.5 5

9.5 36.0 26.0 8.0 7

12.0 43.0 32.0 10.0 9

13.0 44.0 33.5 11.0 10

15.0 50.0 38.0 13.0 12

18.0 58.0 43.0 15.0 14

25.0 75.0 57.0 21.0 20

35.0 103.0 78.0 31.0 30

Dimensions (mm)

A L M S1 S2

FGG 001)

FGG 0B

FGG 1B

FGG XB

FGG 2B

FGG 3B

FGG 4B

FGG 5B

Reference

Model Series

M1 Cable assembly (page 169)

6.4 28.7 20.7 5.5 6

9.5 35.0 25.0 8.0 7

12.0 42.0 31.0 10.0 9

13.0 47.5 37.0 11.0 10

15.0 49.0 37.0 13.0 12

18.0 56.5 41.5 15.0 15

25.0 71.0 53.0 21.0 20

Dimensions (mm)

A L M S1 S2

FGG 001)

FGG 0B

FGG 1B

FGG XB

FGG 2B

FGG 3B

FGG 4B

Reference

Model Series

at 10 MHz

at 1 GHz

Note: 2) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

®®

15www.lemo.com

®®

~M

~L

ø A

S 1

S 2

~M

~L

ø A

S 1

S 2

~M

~L

ø A

B

S 2 S 1

N

Note: cable material: stainless steel with Polyamide sheath.

M4 Cable assembly (page 171)

M1 Cable assembly (page 169)

JGG 0B

Reference

Model Series

JGG Straight plug, short version, key (G), cable collet

9.5 32 22 8 7

Dimensions (mm)

A L M S1 S2

FFG Straight plug, non-latching, key (G) or keys (A…M), cable collet

9.5 36 26 8 7

12.0 43 32 10 9

15.0 50 38 13 12

18.0 58 43 15 14

25.0 75 57 21 20

Dimensions (mm)

A L M S1 S2

FFG 0B

FFG 1B

FFG 2B

FFG 3B

FFG 4B

Reference

Model Series

9.5 15.5 36.0 26.0 140 8 7

12.0 18.0 43.0 32.0 140 10 9

15.0 21.0 49.0 37.0 160 13 12

18.0 25.0 58.0 43.0 190 15 14

25.0 32.0 75.0 57.0 230 21 20

35.0 42.0 103.0 78.0 300 31 30

Dimensions (mm)

A B L M N S1 S2

FNG 0B

FNG 1B

FNG 2B

FNG 3B

FNG 4B

FNG 5B

Reference

Model Series

FNG Straight plug, key (G) or keys (A…M and R), cable collet and lanyard release

16 www.lemo.com

®®

S 1

E maxi

S 3

e

ø B

ø A

M

N

L maxi

P9 Panel cut-out (page 157)

Note: 1) maximum length with crimp contacts

~M

~L

ø A

S 1

S 2

M2 Cable assembly (page 171)

FDG Straight plug, long version, key (G) or keys (A…L), cable collet

12 68 57 10 9

15 79 67 13 12

Dimensions (mm)

A L M S1 S2

FDG 1B

FDG 2B

Reference

Model Series

14.0 12.4 M9x0.6 1.8 22.5 14.5 19.5 8.2 11

18.0 15.8 M12x1.0 2.9 24.9 17.0 24.8 10.5 14

19.5 19.2 M15x1.0 4.1 28.6 18.0 27.3 13.5 17

25.0 25.0 M18x1.0 4.2 32.1 23.0 31.5 16.5 22

Dimensions (mm)

A B e E L M N1) S1 S3

FWG Fixed plug, nut fixing, key (G) or keys (A…L)

FWG 0B

FWG 1B

FWG 2B

FWG 3B

Reference

Model Series

S 2

~M

~L

S 1

ø A

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

M1 Cable assembly (page 169)

FEG Straight plug, key (G) or keys (A…L), cable collet, front seal and nut for fitting a bend relief 1)

(IP 54 protection index when mated)

11.0 35.0 25.0 8 7

13.5 42.0 33.0 10 9

16.5 48.0 36.0 13 12

19.0 56.5 41.5 15 15

Dimensions (mm)

A L M S1 S2

FEG 0B

FEG 1B

FEG 2B

FEG 3B

Reference

Model Series

17www.lemo.com

®®

M3 Cable assembly (page 169)

M

ø A

~H

S 2

L

D

S 1

S 3

M3 Cable assembly (page 169)

M

L

~H

ø A

S 2

S 3

S 1

7.5 18 24.5 16.5 6.5 5 5.3

9.5 23 30.0 20.0 8.0 7 8.0

12.0 29 36.0 25.0 11.0 9 10.0

15.0 35 41.5 29.5 13.5 12 13.0

Dimensions (mm)

A H L M S1 S2 S3

FPG 00

FPG 0B

FPG 1B

FPG 2B

Reference

Model Series

FPG Elbow (90°) plug, key (G) or keys (A…M and R), cable collet

19 10 37 50 35 17 14 15

26 15 52 67 49 22 20 21

36 21 74 90 65 32 30 31

Dimensions (mm)

A D H L M S1 S2 S3

FHG 3B

FHG 4B

FHG 5B

Reference

Model Series

FHG Elbow (90°) plug, key (G) or keys (A…M and R), cable collet

ø A

e

ø B

S 3

S 1

N

M

E maxi

L maxi

Note: The 5B series is delivered without locking washer or tapered washer

and with a round nut.

P1 Panel cut-out (page 157)

8 10.2 M7x0.5 2.9 18.1 9.0 15.0 6.3 9

10 12.4 M9x0.6 4.2 20.8 11.5 18.9 8.2 11

14 15.8 M12x1.0 5.4 25.2 12.5 21.6 10.5 14

18 19.2 M15x1.0 6.0 28.7 13.8 23.9 13.5 17

22 25.0 M18x1.0 5.8 32.1 17.0 30.2 16.5 22

29 34.0 M25x1.0 6.8 37.1 20.5 34.7 23.5 30

40 40.0 M35x1.0 6.8 47.1 28.0 42.8 33.5 –

Dimensions (mm)

A B e E L M N1) S1 S3

FAG Fixed plug, non-latching, nut fixing, key (G) or keys (A…M and R)

FAG 00

FAG 0B

FAG 1B

FAG 2B

FAG 3B

FAG 4B

FAG 5B

Reference

Model Series

M

L

~H

ø A

S 1

S 2

M5 Cable assembly (page 170)

8.0 18.1 24.8 16.8 5 7

10.0 22.4 30.3 20.3 7 9

12.0 26.4 36.5 25.5 9 11

16.5 34.5 44.0 32.0 12 15

Dimensions (mm)

A H L M S1 S2

FSG 00

FSG 0B

FSG 1B

FSG 2B

Reference

Model Series

FSG Anglissimo right angle plug, key (G) or keys (A…M), cable collet

Note: 1) maximum length with crimp contacts.

18 www.lemo.com

®®

ø A

e

ø B

S 3

S 1

E maxi

N

M

L maxi

Note: The 5B series is delivered without locking washer or tapered washer

and with a round nut.

P1 Panel cut-out (page 157)

ø A

e

ø B

S 1

E maxi

S 3 M

L maxi

N

Note:

1) maximum length with crimp contacts.

2) for the 1B series the earthing tag is on the same side of the key.

P1 Panel cut-out (page 157)

8 10.2 M7x0.5 6.0 15.5 1.0 13.7 6.3 9

10 12.4 M9x0.6 7.0 20.7 1.2 19.1 8.2 11

14 15.8 M12x1.0 7.5 23.0 1.5 21.1 10.5 14

18 19.2 M15x1.0 8.5 26.7 1.8 24.6 13.5 17

22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22

28 34.0 M25x1.0 12.0 35.7 2.5 34.1 23.5 30

Dimensions (mm)

A B e E L M N1) S1 S3

ENG Fixed socket with earthing tag, nut fixing, key (G) or keys (A…M)

ENG 00

ENG 0B

ENG 1B2)

ENG 2B

ENG 3B

ENG 4B

Reference

Model Series

8 10.2 M7x0.5 2.0 15.5 8.5 13.7 6.3 9

10 12.4 M9x0.6 2.0 19.5 12.5 19.1 8.2 11

14 15.8 M12x1.0 4.0 21.7 12.0 21.1 10.5 14

18 19.2 M15x1.0 5.1 22.7 12.5 24.6 13.5 17

22 25.0 M18x1.0 7.1 30.7 13.5 30.3 16.5 22

40 40.0 M35x1.0 2.5 43.5 28.0 38.5 33.5 –

Dimensions (mm)

A B e E L M N1) S1 S3

EHG Fixed socket, nut fixing, key (G) or keys (A…M and R), and protruding shell

EHG 00

EHG 0B

EHG 1B

EHG 2B

EHG 3B

EHG 5B

Reference

Model Series

e

ø B

S 1

E maxi

S 3

N

M

L maxi

ø A

Note: The 5B series is delivered with a tapered washer and a round nut.

P1 Panel cut-out (page 157)

8 10.2 M7x0.5 6.0 15.5 1.0 13.7 6.3 9

10 12.4 M9x0.6 7.0 20.7 1.2 19.1 8.2 11

14 15.8 M12x1.0 7.5 23.0 1.5 21.1 10.5 14

16 19.0 M14x1.0 7.0 23.5 1.5 20.0 12.5 17

18 19.2 M15x1.0 8.5 26.7 1.8 24.6 13.5 17

22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22

28 34.0 M25x1.0 12.0 35.7 2.5 34.1 23.5 30

40 40.0 M35x1.0 11.0 43.5 3.0 39.6 33.5 –

Dimensions (mm)

A B e E L M N1) S1 S3

EGG Fixed socket, nut fixing, key (G) or keys (A…M and R)

EGG 00

EGG 0B

EGG 1B

EGG XB

EGG 2B 2)

EGG 3B

EGG 4B

EGG 5B

Reference

Model Series

Note: 1) maximum length with crimp contacts.

2) EGG.2B.304.CLL and EGG.2B.307.CLL are UL 508A under file E119802.

Note: 1) maximum length with crimp contacts.

19www.lemo.com

®®

ø A

e

ø B

S 1

N

P

M

L maxi

E maxi

S 2

Note: The 3B, 4B and 5B series are delivered with a conical nut.

The 5B series is delivered without locking washer or tapered washer.

P1 Panel cut-out (page 157)

ø A

e

ø B

S 3

N

M

L maxi

E maxi

S 1

Note: The 3B, 4B and 5B series are delivered with a conical nut.

The 5B series is delivered with a tapered washer and a round nut.

ø A

e

ø B

N

P

M

L maxi

E maxi

S 2

P2 Panel cut-out (page 157)

Note: 1) maximum length with crimp contacts.

P1 Panel cut-out (page 157)

10 9.5 M7x0.5 2.3 15.5 2.5 13.7 6.0 6.3 7.5

12 12.5 M9x0.6 2.4 20.7 2.5 19.1 6.3 8.2 9.0

16 16.0 M12x1.0 6.5 23.0 3.5 21.1 11.0 10.5 13.0

20 20.0 M15x1.0 4.3 26.7 3.5 24.6 9.0 13.5 15.0

24 25.0 M18x1.0 6.1 30.7 4.5 28.1 12.0 16.5 20.0

30 32.1 M25x1.0 10.6 35.7 4.5 34.1 16.5 23.5 26.0

41 40.0 M35x1.0 13.5 43.5 5.0 39.6 19.5 33.5 38.0

Dimensions (mm)

A B e E L M N1) P S1 S2

EEG 00

EEG 0B

EEG 1B

EEG 2B

EEG 3B

EEG 4B

EEG 5B

Reference

Model Series

EEG Fixed socket, nut fixing, key (G) or keys (A…M and R) (back panel mounting)

12 12.5 M9x0.6 5.5 20.7 2.5 19.1 9 8

Dimensions (mm)

A B e E L M N1) P S2

EFG Fixed socket, nut fixing, key (G) or keys (A…M), with two flats on the shell and O-ring

(back panel mounting)

EFG 0B

Reference

Model Series

10 10.2 M7x0.5 4.3 13.7 2.5 13.7 6.3 9

12 12.4 M9x0.6 5.5 20.7 2.5 19.1 8.2 11

16 15.8 M12x1.0 6.0 23.0 3.5 21.1 10.5 14

18 19.0 M14x1.0 6.0 23.5 3.5 20.0 12.5 17

20 19.2 M15x1.0 6.5 26.7 3.5 24.6 13.5 17

24 25.0 M18x1.0 9.0 30.7 4.5 28.1 16.5 22

30 34.0 M25x1.0 10.0 35.7 4.5 32.6 23.5 30

41 40.0 M35x1.0 9.0 43.5 5.0 39.6 33.5 –

Dimensions (mm)

A B e E L M N1) S1 S3

ECG Fixed socket with two nuts, key (G) or keys (A…M and R) (back panel mounting)

ECG 00

ECG 0B

ECG 1B

ECG XB

ECG 2B

ECG 3B

ECG 4B

ECG 5B

Reference

Model Series

Note: 1) maximum length with crimp contacts.

20 www.lemo.com

®®

ø A

ø 0.7

N

3H

B

K

ø 0.5

PCB drilling pattern (pages 160 and 163)

P15 P16

+

Note: The 3B series is delivered with a conical nut.

P17 PCB drilling pattern (page 164)

P1 Panel cut-out (page 157)

ø A

e

ø B

S 3

N

M

S 1

E maxi

2

20 mini

L

ø A

e

ø B

S 3

N

L

M

E maxi

S 1

Note: The 3B, 4B and 5B series are delivered with a conical nut.

The 5B series is delivered with a tapered washer and a round nut.

P15 PCB drilling pattern (page 160)

P1 Panel cut-out (page 157)

10 10.2 M7x0.5 4.3 2.5 13.7 6.3 9

12 12.4 M9x0.6 5.5 2.5 16.1 8.2 11

16 15.8 M12x1.0 6.0 3.5 19.8 10.5 14

18 19.0 M14x1.0 6.0 3.5 20.0 12.5 17

20 19.2 M15x1.0 6.5 3.5 21.8 13.5 17

24 25.0 M18x1.0 9.0 4.5 25.8 16.5 22

30 34.0 M25x1.0 10.0 4.5 29.8 23.5 30

41 40.0 M35x1.0 9.0 5.0 36.8 33.5 –

Dimensions (mm)

A B e E M N S1 S3

ECG Fixed socket with two nuts, key (G) or keys (A…F and R) and straight contact for printed circuit

(back panel mounting)

ECG 00

ECG 0B

ECG 1B

ECG XB

ECG 2B

ECG 3B

ECG 4B

ECG 5B

Reference

Model Series

12 12.4 M9x0.6 5.5 2.5 18.3 8.2 11

16 15.8 M12x1.0 6.0 3.5 20.3 10.5 14

20 19.2 M15x1.0 6.5 3.5 22.3 13.5 17

24 25.0 M18x1.0 9.0 4.5 25.8 16.5 22

Dimensions (mm)

A B e E M S1 S3

ECG Fixed socket with two nuts, key (G) or keys (A…F) with elbow (90°) contact for printed circuit

(back panel mounting)

ECG 0B

ECG 1B

ECG 2B

ECG 3B

Reference

Model Series N

max

EZG Straight socket for printed circuit, key (G) or keys (A, B)

6.8 7 5.08 7 14

Dimensions (mm)

A B H K N

EZG 00

Reference

Model Series

Note: This contact type is available for Ell socket models fitted with

female contacts.

Length «L» depends on the number of contacts, see table on page 163.

Note: this female contact type is available for all back panel mounting

socket models.

Length «L» depends on the number of contacts, see PCB drilling pattern

on page 164. For male contacts, sockets are available upon request, with

J, K or L keys.

LN

ø A

K

M 1.6

H

B

Note:

Length «L» depends on the number of contacts, see table on page 163.

PCB drilling pattern (pages 160 and 163)

P15 P16

+

21www.lemo.com

®®

L

ø A

e

P

9

M

E maxi

N

S 1

ø C

M 1.6

D

B

PCB drilling pattern (pages 160 and 163)

P15 P16

+

Note: Length «L» depends on the number of contacts, see page 163.

P1 Panel cut-out 0B and 2B series (page 157)

P10 Panel cut-out 1B series (page 157)

EZG Straight socket for printed circuit, key (G) or keys (A…F)

9 10 7.62 8 15.0

11 12 7.62 8 19.0

14 15 10.16 9 22.5

Dimensions (mm)

A B H K N

EZG 0B

EZG 1B

EZG 2B

Reference

Model Series

EYG Fixed socket for printed circuit, nut fixing, key (G) or keys (A…F) (back panel mounting)

12 10 12.5 7.62 M9x0.6 2.6 2.5 15.0 6.0 8.2

14 12 16.0 7.62 M11x0.5 5.0 3.5 19.0 10.0 –

20 15 19.5 10.16 M15x1.0 7.5 3.5 22.5 13.5 13.5

Dimensions (mm)

A B C D e E M N P S1

EYG 0B

EYG 1B

EYG 2B

Reference

Model Series

S 2

~L

S 1

ø A

PHG Free socket, key (G) or keys (A…M and R), cable collet

Note: 1) the surface design of the 00 series is different.

M1 Cable assembly (page 169)

6.8 26.0 5.5 5

9.5 35.5 8.0 7

12.5 40.5 10.0 9

13.0 46.0 11.0 10

16.5 47.0 13.0 12

19.0 56.0 15.0 14

26.0 73.0 21.0 20

36.0 99.0 31.0 30

Dimensions (mm)

A L S1 S2

PHG 001)

PHG 0B

PHG 1B

PHG XB

PHG 2B

PHG 3B

PHG 4B

PHG 5B

Reference

Model Series

22 www.lemo.com

®®

~L

S 2 S 1

ø A

Note: 1) the surface design of the 00 series is different.

PHG Free socket, key (G) or keys (A…M), cable collet and nut for fitting a bend relief 2)

M1 Cable assembly (page 169)

6.8 34.0 5.5 6

9.5 34.5 8.0 7

12.5 39.5 10.0 9

13.0 49.5 11.0 10

16.5 46.0 13.0 12

19.0 54.5 15.0 15

26.0 69.0 21.0 20

Dimensions (mm)

A L S1 S2

PHG 001)

PHG 0B

PHG 1B

PHG XB

PHG 2B

PHG 3B

PHG 4B

Reference

Model Series

~L

ø A

B

S 2 S 1

N

Note: cable material: stainless steel with Polyamide sheath.

M1 Cable assembly (page 169)

12.4 18.4 40.5 140 10 9

16.5 22.5 47.0 160 13 12

19.0 26.0 56.0 190 15 14

26.0 33.0 73.0 230 21 20

36.0 43.0 99.0 300 31 30

Dimensions (mm)

A B L N S1 S2

PNG 1B

PNG 2B

PNG 3B

PNG 4B

PNG 5B

Reference

Model Series

PNG Free socket, nut fixing, key (G) or keys (A…L and R), cable collet with lanyard release

Note: 2) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

23www.lemo.com

®®

~L

ø A

e

S 3

S 1

M

E maxi

ø B

S 2

P1 Panel cut-out (page 157)

Note: the 5B series is delivered with a tapered washer and a round nut.

ø A

e

ø B

S 3 M

E maxi

S 1

S 2

~L

Note: the 3B, 4B and 5B series are delivered with a conical nut.

The 5B series is delivered with a tapered washer and a round nut.

P1 Panel cut-out (page 157)

M1 Cable assembly (page 169)

8 10.2 M7x0.5 6.5 26.0 1.0 6.3 5 9

10 12.4 M9x0.6 7.0 35.5 1.2 8.2 7 11

14 15.8 M12x1.0 7.5 40.5 1.5 10.5 9 14

18 19.2 M15x1.0 8.5 47.0 1.8 13.5 12 17

22 25.0 M18x1.0 11.5 56.0 2.0 16.5 14 22

28 34.0 M25x1.0 12.0 73.0 2.5 23.5 20 30

40 40.0 M35x1.0 11.0 99.0 3.0 33.5 30 –

Dimensions (mm)

A B e E L M S1 S2 S3

PKG Fixed socket, nut fixing, key (G) or keys (A…M and R), cable collet

PKG 00

PKG 0B

PKG 1B

PKG 2B

PKG 3B

PKG 4B

PKG 5B

Reference

Model Series

10 10.2 M7x0.5 5.3 26.0 2.5 6.3 5 9

12 12.4 M9x0.6 5.0 35.5 2.5 8.2 7 11

16 15.8 M12x1.0 5.0 40.5 3.5 10.5 9 14

20 19.2 M15x1.0 6.5 47.0 3.5 13.5 12 17

24 25.0 M18x1.0 9.0 56.0 4.5 16.5 14 22

30 34.0 M25x1.0 11.0 73.0 4.5 23.5 20 30

41 40.0 M35x1.0 10.0 99.0 5.0 33.5 30 –

Dimensions (mm)

A B e E L M S1 S2 S3

PFG Fixed socket, with two nuts, key (G) or keys (A…M and R), cable collet (back panel mounting)

PFG 00

PFG 0B

PFG 1B

PFG 2B

PFG 3B

PFG 4B

PFG 5B

Reference

Model Series

P1 Panel cut-out (page 157)

Note: the 4B series has an o-ring on the flange.

M1 Cable assembly (page 169)

24 25 M18x1.0 5.0 56 4.5 12 16.5 14 20

32 34 M25x1.0 12.5 73 5.0 20 23.5 20 27

Dimensions (mm)

A B e E L M P S1 S2 S4

PEG Fixed socket, nut fixing, key (G) or keys (A…L), cable collet (back panel mounting)

PEG 3B

PEG 4B

Reference

Model Series

S 2

~L

S 1 M

P

e

ø A

ø B

S 4

E maxi

M1 Cable assembly (page 169)

24 www.lemo.com

®®

L

S 3 M

ø A

ø B

e

S 1

E maxi

Note:

1) only available with two contacts.

2) RGG.0B only available from 3 till 5 contacts.

3) RGG.1B only available till 7 contacts.

For this fixed coupler, the first contact type mentioned is always the one at the flange end. On request,

these couplers can be produced in other series, with other keys.

RGG

GG

GJ

JG

RJG

RGJ

AK

RAK

GM

RGM

P4 Panel cut-out (page 157)

Alignment key see page 36.

Example

Plug with key G RGJ Plug with key J

Contacts Dimensions (mm)

Type A B e E L M S1 S3

RGG1) 0B

RGG2) 0B

RJG 0B

RGJ 0B

RAK 0B

RGM 0B

RGG3) 1B

RJG 1B

RGJ 1B

RJG 2B

RGJ 2B

RGJ 3B

RGJ 4B

Reference

Model Series

female – female 12 13.8 M10x0.75 8.0 34 2.0 9.0 12

female – female 12 13.8 M10x0.75 8.0 43 2.0 9.0 12

male – female 12 13.8 M10x0.75 8.0 34 2.0 9.0 12

female – male 12 13.8 M10x0.75 8.0 34 2.0 9.0 12

female – female 16 19.2 M14x1.00 8.5 47 2.5 12.5 17

male – female 16 19.2 M14x1.00 8.5 39 2.5 12.5 17

female – male 16 19.2 M14x1.00 8.5 39 2.5 12.5 17

male – female 20 21.5 M16x1.00 12.0 44 4.0 15.0 19

female – male 20 21.5 M16x1.00 12.0 44 4.0 15.0 19

female – male 25 27.0 M20x1.00 32.0 53 4.0 18.5 24

female – male 34 34.0 M25x1.00 50.0 65 4.0 23.5 30

RllFixed coupler, nut fixing, key (G) or keys (A and J) at the flange end and keys (J, K or M) at the other end

25www.lemo.com

Types

Technical Characteristics

123

654

123

54

302

303

304

305

306

1

2

34

5

0B, 1B00

1

2

3

4

5

1

23

1

23

4

1

2

34

5

6

123

7

654

2

1

34

8

765

307

00

12

3

0B, 1B

00

12

43

0B, 1B

3081B

1

2

34

5

6

7

1

2

3

45

6

8

7

3090B

1

2

1

2

0B, 1B

3101B

18

45

6

7

3

29

10

1

9

23

6

4

10

87 5

18

45

6

7

3

29

1

9

23

6

4

87 5

43

12

00

54

3

12

3

12

Note:

1) see calculation method, caution and suggested standard on page 190.

Series Series Type

Note:

numbering sequence shown is for female contacts (G keying),

for inverted contacts please contact factory.

Elbow socket models

Types

Electrical

Materials and Treatment

Note:

The surface treatment standards are as follows:

– Nickel: SAE AMS QQ N 290. – Gold: ISO 27874

Material

Surface

Treat. (µm)

Cu Ni Au

Housing

Metallic parts

Earthing crown

Insulator

Female contact

Component

PPS –

Brass 0.5 3 –

Bronze 0.5 3 –

PEEK –

Bronze 0.5 3 1.5

EPG-XBG 00

EPG-EXG 0B

EPG-EXG 1B

EPG 1B

Model Series

Test voltage

(kV rms)1)

Contact-contact

Test voltage

(kV rms)1)

Contact-shell

Rated

current (A)1)

1.00 1.00 2.0

1.45 1.20 4.5

1.70 1.60 4.5

1.30 1.10 4.5

1.25 1.20 4.5

1.25 1.20 2.5

1.00 1.00 2.0

0.60 0.50 1.5

1.70 1.45 4.5

1.60 1.85 4.5

1.70 1.80 4.5

1.30 1.55 4.5

1.35 1.45 4.5

1.45 1.45 2.0

1.30 1.30 2.0

1.00 1.00 1.5

1.00 1.30 1.0

302-303-304-305

302

303

304

305

306

307

309

302

303

304

305

306

307

308

310

314

®®

P18 PCB drilling pattern (page 165)

P19 PCB drilling pattern (page 165)

L

ø A

H

3.0 (00)

3.2 (0B-1B) I

K

N

M 1.6 D

ø 0.7

R

ø 0.5 (00)

ø 0.7 (0B-1B)

26 www.lemo.com

EPG Elbow (90°) socket for printed circuit, key (G) or keys (A…F) (solder or screw fixing)

11 21 7.7 14.3 19 36 15.4

Dimensions (mm)

A D H I K L N

EPG.1B.314.NLN

Part number

EPG Elbow (90°) socket for printed circuit, key (G) or keys (A…F) (solder or screw fixing)

Note: to replace the 4 ground pins by 4 screws (M1.6) add an «S» to the end of the

part number. (e.g.: EPG.1B.314.NLNS)

L

ø A

H

3 I

K

N

M 1.6 D

ø 0.7 ø 0.6

12.7

P20 PCB drilling pattern (page 165)

Note: In the 0B and 1B series, it is possible to replace the 4

ground pins by 4 screws (M1.6) add an «S» to the end of the

part number. (e.g.: EPG.0B.307.HLNS)

P18 PCB drilling pattern 00 series (page 165)

P19 PCB drilling pattern 0B, 1B series (page 165)

6.8 11.5 3.5 7.0 8.7 19 7.1 5.08

9.0 14.6 6.7 12.6 13.3 25 11.7 7.62

11.0 16.6 7.5 14.0 13.3 27 12.6 7.62

Dimensions (mm)

A D H I K L N R

EPG.00.302.HLN

EPG.00.303.HLN

EPG.00.304.HLN

EPG.00.305.HLN

EPG.0B.302.HLN

EPG.0B.303.HLN

EPG.0B.304.HLN

EPG.0B.305.HLN

EPG.0B.306.HLN

EPG.0B.307.HLN

EPG.0B.309.HLN

EPG.1B.302.HLN

EPG.1B.303.HLN

EPG.1B.304.HLN

EPG.1B.305.HLN

EPG.1B.306.HLN

EPG.1B.307.HLN

EPG.1B.308.HLN

EPG.1B.310.HLN

Part number

®®

27www.lemo.com

®®

L

K

H

M

S 3

ø A

e

E maxi

D

I

ø B

M 1.6

R

N

3.0 (00)

3.2 (0B-1B)

ø 0.5 (00)

ø 0.7 (0B-1B)

Note: In the 0B and 1B series, it is possible to replace the 4

ground pins by 4 screws (M1.6) add an «S» to the end of the

part number. (e.g.: EXG.0B.307.HLNS).

P18 PCB drilling pattern 00 series (page 165)

P19 PCB drilling pattern 0B, 1B series (page 165)

P2 Panel cut-out 00, 0B series (page 157)

P10 Panel cut-out 1B series (page 157)

10 10.211.5 M7x0.5 2.1 3.5 7.0 8.7 19 2.5 7.1 5.08 9

12 12.414.6 M9x0.6 4.5 6.7 12.6 13.3 25 2.5 11.7 7.62 11

14 15.016.6M11x0.5 7.5 7.5 14.0 13.3 27 3.5 12.6 7.62 13

Dimensions (mm)

A B D e E H I K L M N R S3

EXG Elbow (90°) socket for printed circuit with two nuts, key (G) or keys (A…F) (solder or screw fixing)

(back panel mounting)

XBG Elbow (90°) socket fixing nut for printed circuit, key (G) or keys (A, B) (back panel mounting)

XBG.00.302.HLN

XBG.00.303.HLN

XBG.00.304.HLN

EXG.0B.302.HLN

EXG.0B.303.HLN

EXG.0B.304.HLN

EXG.0B.305.HLN

EXG.0B.306.HLN

EXG.0B.307.HLN

EXG.0B.309.HLN

EXG.1B.302.HLN

EXG.1B.303.HLN

EXG.1B.304.HLN

EXG.1B.305.HLN

EXG.1B.306.HLN

EXG.1B.307.HLN

EXG.1B.308.HLN

EXG.1B.310.HLN

Part number

28 www.lemo.com

®

ø A

~M

~L

S 2

M1 Cable assembly (page 169)

ø A

~M

~L

S 2

Note on availability

These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The

design, including a latch sleeve and a metal earthing crown, guarantees EMC screening efficiency to meet most requirements.

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

Standard

Value

PEEK PSU PPSU

M1 Cable assembly (page 169)

Mechanical and Climatical

Technical Characteristics

Plastic housing models

Characteristics

natural (beige) white or grey cream –

> 5000 cycles > 5000 cycles > 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C –

- 50° C/+ 250° C - 50° C/+ 150° C - 50° C/+ 180° C –

> 200 cycles ~20 cycles > 100 cycles IEC 60601-1 § 44.7

very good limited good –

Colour

Endurance1)

Humidity

Temperature range

Sterilization resistance2)

Resistance to solvents

FGG Straight plug, key (G or J), cable collet, PEEK outer shell

11.0 37.4 27.4 8

13.5 43.0 32.0 10

19.0 62.0 47.0 15

26.0 78.5 60.5 20

Dimensions (mm)

A L M S2

FGG 0B

FGG 1B

FGG 3B

FGG 4B

Reference

Model Series

FGG Straight plug, key (G or J), cable collet, PEEK outer shell and nut for fitting a bend relief 1)

13.5 42.2 31.2 10

26.0 83.2 65.2 20

for all collet type

only from collet M82 and up

Dimensions (mm)

A L M S2

FGG 1B

FGG 4B

Reference

Model Series

Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force. 2) Steam sterilization.

29www.lemo.com

®

~M

~L

ø A

S 2

M1 Cable assembly (page 169)

FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell

16.5 50.5 39.5 13

19.0 58.0 43.0 15

26.0 76.2 58.2 20

Dimensions (mm)

A L M S2

FGY 2B

FGY 3B

FGY 4B

Reference

Model Series

~M

~L

ø A

S 2

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

M1 Cable assembly (page 169)

FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell and nut for fitting a bend relief 1)

16.5 49.5 38.5 13

19.0 56.5 41.5 15

26.0 74.4 56.4 20

Dimensions (mm)

A L M S2

FGY 2B

FGY 3B

FGY 4B

Reference

Model Series Note on availability

only for collet M42 and up

only for collet D62 and up

only for collet D82 and up

ø A

e

ø B

S 1

E maxi

S 3 M

L maxi

N

Note: 1) maximum length with crimp contacts.

P1 Panel cut-out (page 157)

11 12.5 M9x0.6 6.4 20.7 1.8 16.5 8.2 11

14 15.8 M12x1.0 7.5 23.0 1.5 21.1 10.5 14

22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22

28 34.0 M25x1.0 12.0 35.7 2.5 32.6 23.5 30

Dimensions (mm)

A B e E L M N1) S1 S3

ENG Fixed socket with earthing tag, nut fixing, key (G or J), PEEK outer shell

ENG 0B

ENG 1B

ENG 3B

ENG 4B

Reference

Model Series

ø A

e

ø B

S 1

E maxi

S 3 M

L maxi

N

Note: 1) maximum length with crimp contacts.

Other models with plastic outer shell are available on request.

P1 Panel cut-out (page 157)

18 19.2 M15x1.0 8.5 26.7 1.8 24.6 13.5 17

22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22

28 34.0 M25x1.0 12.0 35.7 2.5 32.6 23.5 30

Dimensions (mm)

A B e E L M N1) S1 S3

ENY Fixed socket with earthing tag, nut fixing, keys (Y), PSU or PPSU outer shell

ENY 2B

ENY 3B

ENY 4B

Reference

Model Series

30 www.lemo.com

Mechanical and Climatical

Technical Characteristics

These plug, socket and coupler models allow the device on which they are fitted to reach a protection index of IP68 as

per IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military,

laboratory equipment, aviation, etc.

These models are identified by a letter «P» at the end of the reference.

Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at

the end of the part number (certificate on request).

Epoxy resin is used to seal these models.

Watertight or vacuumtight models

Characteristics Value Standard

> 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 20° C/+ 100° C

- 20° C/+ 80° C

> 1000h IEC 60512-6 test 11f

20/80/21 IEC 60068-1

< 10-7 mbar.l.s-1 IEC 60512-7 test 14b

Endurance1)

Humidity

Temperature range

Salt spray corrosion test4)

Climatical category

Leakage rate (He)2)

Characteristics Value Standard

60 bar IEC 60512-7 test 14d

40 bar IEC 60512-7 test 14d

30 bar IEC 60512-7 test 14d

15 bar IEC 60512-7 test 14d

5 bar IEC 60512-7 test 14d

Maximum operating

pressure3)

Dimensions (mm)

A B e E L M S1 S3

YHG Fixed plug, nut fixing, non-latching, key (G) or keys (A…M)

YHG 0B

YHG 1B

YHG 2B

YHG 3B

Reference

Model Series

13 12.4 M9x0.6 2.4 24.1 14.2 8.2 11

16 15.8 M12x1.0 3.9 28.0 16.2 10.5 14

19 19.2 M15x1.0 5.5 33.1 17.8 13.5 17

22 25.0 M18x1.0 5.1 38.2 22.2 16.5 22

S 3 M

L maxi

e

ø B

ø A

S 1

E maxi

Note: this model does not include an O-ring behind the flange, it ensures

only IP61 protection index. Consequently, it is not vacuumtight. Water-

tightness (when mated) is only ensured with HHG and HCG sockets.

P9 Panel cut-out (page 157)

00

0B

1B

2B

3B

4B

5B

00 to 1B

2B to 5B

Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.

2) only for vacuumtight models. Residual traces of grease used during (He) leak testing are on the o-ring. Please contact us for further details.

3) this value corresponds to the maximum allowed pressure difference for the assembled socket. 4) for chrome plated product (« C » material code).

®®

31www.lemo.com

®®

S 3

L maxi

M

ø A

e

ø B

S 1

E maxi

Note: the 5B series is delivered with a tapered washer and a round nut.

P9 Panel cut-out (page 157)

11 10.2 M7x0.5 8.0 18.0 1.5 – 9

13 12.4 M9x0.6 7.0 21.5 3.0 8.2 11

18 15.8 M12x1.0 7.0 26.6 4.5 10.5 14

20 19.2 M15x1.0 8.0 31.6 4.0 13.5 17

25 25.0 M18x1.0 11.5 36.1 4.0 16.5 22

34 34.0 M25x1.0 11.0 43.1 4.0 23.5 30

45 40.0 M35x1.0 11.0 53.6 5.0 33.5 –

Dimensions (mm)

A B e E L M S1 S3

HGG Fixed socket, nut fixing, key (G) or keys (A…M and R), watertight or vacuumtight

HGG 00

HGG 0B

HGG 1B

HGG 2B

HGG 3B

HGG 4B

HGG 5B

Reference

Model Series

P9 Panel cut-out (page 157)

ø A

e

ø B

S 3

S 1

L maxi

M

E maxi

P9 Panel cut-out (page 157)

Note: this model ensures watertightness (IP66) in the mating area when

mated with FGG or similar plug.

Dimensions (mm)

A B e E L M S1 S3

HNG Fixed socket, nut fixing, with earthing tag, key (G) or keys (A…M), watertight or vacuumtight

HNG 0B

Reference

Model Series

13 12.4 M9x0.6 7 21.5 3 8.2 11

e

ø B

S 3

S 1

L maxi

M

E maxi

ø A

Dimensions (mm)

A B e E L M S1 S3

HHG Fixed socket, nut fixing, key (G) or keys (A…M), watertight or vacuumtight (watertight when mated)

HHG 0B

HHG 1B

HHG 2B

HHG 3B

Reference

Model Series

13 12.4 M9x0.6 7.0 24.5 4.8 8.2 11

18 15.8 M12x1.0 7.0 30.3 5.2 10.5 14

22 19.2 M15x1.0 8.0 35.6 6.0 13.5 17

25 25.0 M18x1.0 11.5 41.3 7.2 16.5 22

32 www.lemo.com

®

ø A

e 1

ø B

L maxi

M

P

F maxi

S 1 E maxi

e

ø C

P3 Panel cut-out (page 157)

Note: this model ensures watertightness (IP66) in the mating area when mated with

FGG or similar plug.

HCG Fixed socket, nut fixing, key (G) or keys (A…M), watertight or vacuumtight (watertight when mated)

(back panel mounting)

18 18 12.0 M14x1.0 M9x0.6 3.9 1.0 24.5 3.5 7.5 12.5

20 20 14.5 M16x1.0 M12x1.0 6.2 2.0 30.3 3.5 10.0 14.5

24 24 17.5 M19x1.0 M14x1.0 6.7 1.5 35.6 3.5 11.3 17.0

Dimensions (mm)

A B C e e1 E F L M P S1

HCG 0B

HCG 1B

HCG 2B

Reference

Model Series

ø A

e

ø B

S1S2

L maxi

M

E maxi

P

P9 Panel cut-out (page 157)

Dimensions (mm)

A B e E L M P S1 S2

HEG Fixed socket, nut fixing, key (G) or keys (A…M), watertight or vacuumtight (back panel mounting)

HEG 00

HEG 0B

HEG 1B

HEG 2B

Reference

Model Series

10 11 M7x0.5 2.5 18.2 2.5 6.0 6.3 –

12 13 M9x0.6 5.5 21.5 2.5 9.0 8.2 –

16 18 M12x1.0 6.5 26.6 3.5 11.0 10.5 –

20 20 M15x1.0 5.0 31.6 3.5 9.6 13.5 15

P9 Panel cut-out (page 157)

ø A

e

ø B

S1

L maxi

M

E maxi

P

Note: 1) the surface design of the 2B series is different.

Dimensions (mm)

A B e E L M P S1

HMG Fixed socket with earthing tag, nut fixing, key (G) or keys (A…M), watertight or vacuumtight

(back panel mounting)

HMG 00

HMG 0B

HMG 1B

HMG 2B1)

HMG 3B

Reference

Model Series

10 11 M7x0.5 2.5 18.0 2.5 6.0 6.3

12 13 M9x0.6 5.5 21.5 2.5 9.0 8.2

16 18 M12x1.0 5.5 26.6 3.5 11.0 10.5

20 20 M15x1.0 5.5 31.6 3.5 9.6 13.5

24 25 M18x1.0 7.5 36.1 4.5 14.0 16.5

Note: The 3B series is delivered with a conical nut and without washer.

33www.lemo.com

®®

E maxi

S 3

ø A

S 1 M

ø B

e

L

Note: The 5B series is delivered with a round nut.

SGJ

GJ

JG

SJG

KA

SKA

LB

SLB

AK

SAK

BL

SBL

P4 Panel cut-out (page 157)

P9 Panel cut-out 1B series (page 157)

Alignment key see page 36.

Example

Plug with key G SGJ Plug with key J

Contacts Dimensions (mm)

Type A B e E L M S1 S3

SGJ 0B

SJG 0B

SGJ 1B

SJG 1B

SGJ 2B

SJG 2B

SGJ 3B

SJG 3B

SAK 3B

SBL 3B

SAK 4B

SBL 4B

SGJ 4B

SJG 4B

SGJ 5B

SJG 5B

SKA 5B

SLB 5B

SAK 5B

SBL 5B

Reference

Model Series

female – male 14 13.8 M10x0.75 17 34 2.0 9.0 12

male – female 14 13.8 M10x0.75 17 34 2.0 9.0 12

female – male 17 15.8 M12x1.00 28 39 2.5 10.5 14

male – female 17 15.8 M12x1.00 28 39 2.5 10.5 14

female – male 20 21.5 M16x1.00 25 44 4.0 15.0 19

male – female 20 21.5 M16x1.00 25 44 4.0 15.0 19

female – male 25 27.0 M20x1.00 30 53 4.0 18.5 24

male – female 25 27.0 M20x1.00 30 53 4.0 18.5 24

female – male 25 27.0 M20x1.00 30 53 4.0 18.5 24

female – male 34 34.0 M25x1.00 50 65 4.0 23.5 30

male – female 34 34.0 M25x1.00 50 65 4.0 23.5 30

female – male 45 40.0 M35x1.00 58 80 5.0 33.5 –

male – female 45 40.0 M35x1.00 58 80 5.0 33.5 –

female – male 45 40.0 M35x1.00 58 80 5.0 33.5 –

SllFixed coupler, nut fixing, key (G) or keys (A, B, J, K and L) at the flange end and key (G)

or keys (A, B, J, K and L) at the other end, watertight or vacuumtight

Note: for this fixed coupler, the first contact type mentioned is always the one at the flange end. On

request these couplers can be produced in other series, with other keys.

A

B

H

N

M maxi

L maxi

Technical Characteristics

Note: the last letter of the part number indicates the colour of the housing.

Ex. G (standard) is grey. To obtain another colour, replace this letter by

the letter corresponding to the selected colour (see table on page 72).

Mechanical and Climatical

Note: in order to provide the user with a coding system, the bridge plug

housing, the double panel washers and the bend reliefs are available in

nine colours.

Electrical

Polyamide –

Brass 0.5 3 – –

Brass 0.5 3 0.3 –

PEEK –

Brass 0.5 3 – 1.0

Bronze 0.5 3 – 1.5

Plastic housing

Metallic parts

Insulator

Male contact

Female contact

Component

Surface treat. (µm)

Cu Ni Cr Au

Materials and Treatment

Material

Note: the surface treatment standards are as follows:

– Nickel: SAE AMS QQ N 290, chrome: SAE AMS 2460, gold: ISO 27874

Series

Audio-Mono

Audio-Stereo

Test voltage

(kV rms) 1) 2)

Rated

current (A)

0B l – 1.05 4

0B l – 0.80 4

0B – l 0.40 2

1B l – 1.25 5

1B – l 0.80 3

CFF CRG

34 www.lemo.com

®®

Characteristics Value Standard

> 1000 cycles IEC 60512-5 test 9a

maximum 90° C

Endurance1)

Working temperature

Characteristics Value Standard

< 6 mΩ IEC 60512-2 test 2aContact resistance

CFF.0B.302.PLCG

CRG.0B.302.PLEG

CFF.0B.303.PLCG

CRG.0B.303.PLEG

CRG.0B.306.PLEG

CFF.1B.303.PLCG

CRG.1B.303.PLEG

CFF.1B.306.PLCG

CRG.1B.306.PLEG

Part number

CFF Bridge plug with two non-latching plugs

CRG Bridge plug with two non-latching plugs, and monitoring socket, key (G) or keys (A…M)

CFF-CRG 0B

CFF-CRG 1B

Model Series

13.5 14 27.5 37.2 27.2 22.5

15.0 20 35.0 42.0 31.0 22.0

Dimensions (mm)

A B H L M N

Bridge models

Note:

1) see calculation method, caution and suggested standard on page 190.

2) lowest measured value; contact to contact or contact to shell.

Note: 1) see page 189, contact resistance after mating cycles. See page

185, mechanical endurance latching force.

35www.lemo.com

®®

ø A

M

L

N

M 3.2 mini 1)

L maxi

ø A

e

ø B

E maxi

ø C

Note: 1)minimum length of free thread to ensure mating.

Note: 1) minimum length of free thread to ensure mating.

L

ø A

e

M

P

3.2 mini 1)

I3

2 x M 1.4

2.051.2

5.5

= =

8

Note: to be ordered with nut for fitting a bend relief to obtain the rating

IP 64.

S1S2

~L

~M

ø A

P2 Panel cut-out (page 157)

P2

P18

Panel cut-out (page 157)

PCB drilling pattern for contact only (page 165)

FVG Straight plug, key (G) or keys (B), cable collet

9 28.5 24 5 8

Dimensions (mm)

A L M S1 S2

FVG 00

Reference

Model Series

Threaded-latching models

ESG Fixed socket with two round nuts, key (G) or keys (B), long threaded shell (back panel mounting)

9 9 9.5 M7x0.5 3.2 15.5 2 13.7

Dimensions (mm)

A B C e E L M N

ESG 00

Reference

Model Series

Note: part number for microphone applications: FVB.00.303.NLAE24.

After assembly the special bend relief GMF.00.018.Dl(to be ordered

separately) is to be fitted.

FVB Straight plug, keys (B), short shell for special cable crimping and for fitting a bend relief

9 20 15.4

Dimensions (mm)

A L M

FVB 00

Reference

Model Series

XRB Elbow (90°) socket for printed circuit, keys (B), short shell with one nut, screw fixing (back panel mounting)

10 M7x0.5 7 14 2.5 7

Dimensions (mm)

A e I L M P

XRB 00

Reference

Model Series

36 www.lemo.com

®

α

β

δ

γ

β

(

5

B

)

Note: FTG, FGY, ENY models are not available with all the keys. Please consult pages corresponding to these models.

For Rll models see explanation on page 24 and for Sll models see explanation on page 33.

Front view of a socket

δ

α

γ

β

Front view of a socket

l

l1)

male female

female male

male female

Contact type

Plug Socket Note

Alignment Key and Polarized Keying System

B series connector model part numbers are composed of three letters. The LAST LETTER indicates the key position and

the contact type (male or female).

Series

00 0B 1B

Angles

Nb of

keys

Alignment Key (B series)

Ref.

1 – 0° 0° 0°

2 α 30° 30° 30°

2 α 60° 60° 60°

2 α – 90° 90°

2 β – 135° 135°

2 β – 145° 145°

2 β – 155° 155°

2 γ 45° 45° 45°

2 γ – 70° 70°

2 γ – 80° 80°

2 δ – 110° –

3 – – – –

G

A

B

C

D

E

F

J

K

L

M

Y

Series

XB 2B 3B 4B 5B

Angles

Nb of

keys

Ref.

1 – 0° 0° 0° 0° 0°

2 α 30° 30° 30° 30° 30°

2 α – 45° 45° 45° 45°

2 α – 60° 60° 60° 60°

2 γ – 95° 95° 95° 95°

2 β 120° 120° 120° 120° 120°

2 β – 145° 145° 145° 145°

2 α – 37.5° 37.5° 37.5° 37.5°

2 α – 52.5° 52.5° 52.5° 52.5°

2 γ – 70° 70° 70° 70°

2 – – – – – –

3 β – 112.5° 126° 112.5° –

3 γ – 100° 102° 147.5° –

G

A

B

C

D

E

F

J

K

L

M

Y

l

male female

Contact type

Plug Socket Note

Series

00 0B 1B

Angles

Nb of

keys

Ref.

5 α – – –

5 β – – –

5 γ – – –

5 δ – – –

R

Series

XB 2B 3B 4B 5B

Angles

Nb of

keys

Ref.

5 α – – – – 95°

5 β – – – – 115°

5 γ – – – – 20°

5 δ – – – – 30°

R

Note: 1) only FGY and ENY models are available.

l

First choice alternative

l

Special order alternative

37www.lemo.com

K Series

K series connectors have been specifically designed for outdoor applications.

They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,

free socket, fixed socket or coupler. All models of this series are watertight when mated to give a protection index of IP68

as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP66 otherwise).

K series connectors have the same insulators as the B series and have the following main features:

– security of the Push-Pull latching system – watertight connection (IP 68/IP 66)

– multipole types 2 to 64 contacts – solder, crimp or print (straight or elbow) contacts

– keying system («G» key standard) – multiple key options to avoid cross mating

for connector alignment of similar connectors

– 360° screening for full EMC shielding – high packing density for space savings

– rugged housing for extreme working conditions.

FGG

EGG EBG

PHG

EDG

ENG

HGG S••

FNG

EHG

FXG

FAG

PHG

PBG

TGL*

FTG*

PKG

HEG

EEG

PEG

EEG

HMG

EVG*

FHG

FPG

Straight plugs Fixed sockets Free sockets

Fixed sockets

Free coupler

T-plug

with sockets (90°)

Fixed plugs

Elbow plug

Watertight or vacuumtight models (page 47)

Metal housing models (page 39)

Fixed sockets Fixed coupler

Note: * Contact LEMO for details.

®®

38 www.lemo.com

®®

Part Section Showing Internal Components

4

3

1

2

5

6

7

1

477

32

563 7 641911 12

8 2

4

3

1

2

5

6

7

8

9

10

11

12

10 5

Fixed socket

outer shell

earthing crown

retaining ring

hexagonal nut

insulator

female contact

o-ring

Straight plug

outer shell

latch sleeve

inner shell

retaining ring

collet nut

split insert carrier

insulator

male contact

earthing cone

collet

gasket

washer

FGG.3K.310.CLAC65 = straight plug with key (G) and cable collet, 3K series, multipole type with 10 contacts, outer shell in chrome-

plated brass, PEEK insulator, male solder contacts, C type collet for 6.5 mm diameter cable.

EGG.3K.310.CYM = fixed socket, nut fixing, with key (G), 3K series, multipole type with 10 contacts, outer shell in chrome-plated brass,

PEEK extended insulator, female crimp contacts.

SLG.3K.310.TLAPV = fixed coupler, nut fixing, keys (L) on the flange end and key (G) at the other end, 3K series, multipole type with

10 contacts, outer shell in stainless steel, PEEK insulator, male-female contacts, vacuumtight.

PHG.3K.310.CLLC65Z = free socket with key (G) and cable collet, 3K series, multipole type with 10 contacts, outer shell in chrome-

plated brass, PEEK insulator, female solder contacts, C type collet for 6.5 mm diameter cable and nut for fitting a bend relief.

Fixed socket

Part Numbering System

Plug

F G G 3K

Cable ø: (page 68)

Collet type: (page 68)

Variant: (page 71)

3 1 0

Insert configuration: (page 57)

Alignment key: (page 49)

Model: (page 39)

Series: (page 39)

C L A C 6 5

Contact: (page 64)

Insulator: (page 64)

Housing: (page 64)

Variant: (page 71)

...

Free socket Z

P H G 3K 3 1 0 C L L C 6 5

.. .

E G G 3K 3 1 0 C Y M

.. .

Coupler PV

S L G 3K 3 1 0 T L A

.. .

®®

39www.lemo.com

~M

~L

ø A

S 2

ø B

S 1

S 2

~M

~L

ø A

Note: 1) correspond to K type of collet, the fitting of oversize collets onto

this model allows them to be fitted to the cables that can be accommodated

by the next housing size up (see page 68).

M2 Cable assembly (page 173)

M1 Cable assembly (page 172)

Metal housing models

Technical Characteristics

Electrical

Note:

the various tests have been carried out with FGG and EGG connector

pairs, with chrome-plated brass shell, PEEK insulator and silicone O-ring.

Detailed electrical characteristics, as well as materials and treatment are

presented in the chapter Technical Characteristics on page 182.

1) see page 189, contact resistance after mating cycles. See page 185,

mechanical endurance latching force.

2) minimum operating temperature is -20°C for sockets fitted with an FPM

(Viton®) O-ring.

3) IP68 achieved providing that the cable is perfectly circular and that

assembly process ensures a high integrity seal.

4) for chrome plated product (« C » material code).

Mechanical and Climatical

Characteristics Value Standard

> 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 55° C, + 200° C

10-2000 Hz, 15g IEC 60512-4 test 6d

100 g, 6 ms IEC 60512-4 test 6c

> 1000h IEC 60512-6 test 11f

IP 68/IP 66 IEC 60529

50/175/21 IEC 60068-1

Endurance1)

Humidity

Temperature range2)

Resistance to vibrations

Shock resistance

Salt spray corrosion test4)

Protection index (mated)3)

Climatical category

Value Standard

> 95 dB IEC 60169-1-3

> 80 dB IEC 60169-1-3

11 34 23.0 8

13 42 28.0 9

16 52 36.0 12

19 61 41.0 15

25 71 50.5 19

38 92 67.0 30

Dimensions (mm)

A L M S2

FGG 0K

FGG 1K

FGG 2K

FGG 3K

FGG 4K

FGG 5K

Reference

Model Series

FGG Straight plug, key (G) or keys (A to F, L and R), cable collet

13 14.5 60.0 46 12 12

16 17.0 68.0 52 15 15

19 22.0 85.0 65 19 19

25 36.0 119.5 99 30 32

Dimensions (mm)

A B L M S1 S2

FGG 1K

FGG 2K

FGG 3K

FGG 4K

Reference

Model Series

FGG Straight plug, key (G) or keys (A to F, L and R), cable collet and oversize cable collet 1)

Characteristics

Shielding

efficiency

at 10 MHz

at 1 GHz

40 www.lemo.com

®®

~M

~L

S 2

ø A

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

~M

~L

ø A

B

N

S 2

FGG Straight plug, key (G) or keys (A to F, L and R),cable collet and nut for fitting a bend relief 1)

M1 Cable assembly (page 172)

11 34 23.0 7

13 42 28.0 9

16 52 36.0 12

19 60 40.0 15

25 71 50.5 19

Dimensions (mm)

A L M S2

FGG 0K

FGG 1K

FGG 2K

FGG 3K

FGG 4K

Reference

Model Series

Note: cable material: stainless steel with Polyamide sheath

M1 Cable assembly (page 172)

16 22 52 36.0 160 12

25 32 71 50.5 230 19

Dimensions (mm)

A B L M N S2

FNG 2K

FNG 4K

Reference

Model Series

FNG Straight plug, key (G) or keys (A to F and L), cable collet and lanyard release

FXG Fixed plug with round flange, key (G) or keys (A to F, L and R) and screw fixing

38 22.5 3.4 20.6 61 10.0 30.0 15

47 28.5 3.4 27.0 71 11.0 32.0 19

65 42.5 4.4 38.0 100 12.5 38.5 30

Dimensions (mm)

A B G H L M P S2

FXG 3K

FXG 4K

FXG 5K

Reference

Model Series

H

ø G

ø A

~ L

S 2

P

ø B

M

Note: this model does not include an O-ring behind the flange, it allows

the device on which it is fitted to reach only IP50 protection index.

It does not have a cable collet.

P6 Panel cut-out (page 159)

41www.lemo.com

®®

L maxi

ø A

e

ø B

S 3

S 1

E maxi

M

N

P1 Panel cut-out (page 159)

~M

~L

ø A

~H

S 1

S 2

S 3

D

Note: The 1K series is delivered with a locking washer.

The 5K series is delivered with a round nut.

M3 Cable assembly (page 172)

20 21.5 M16x1.0 2.3 22.6 16.0 22.5 14.5 19

25 27.0 M20x1.0 4.5 33.6 18.0 28.3 18.5 24

31 34.0 M24x1.0 4.0 34.3 22.5 33.8 22.5 30

37 40.5 M30x1.0 4.0 35.3 23.0 36.3 28.5 36

55 54.0 M45x1.5 4.0 43.5 28.5 42.3 42.5 –

Dimensions (mm)

A B e E L M N1) S1 S3

FAG Fixed plug, nut fixing, non-latching, key (G) or keys (A to F, L and R)

FAG 1K

FAG 2K

FAG 3K

FAG 4K

FAG 5K

Reference

Model Series

11 7.3 25 36 25 9 8 8

13 8.7 33 42 28 11 9 10

16 10.2 40 51 35 14 12 13

Dimensions (mm)

A D H L M S1 S2 S3

FPG 0K

FPG 1K

FPG 2K

Reference

Model Series

FPG Elbow (90°) plug, key (G) or keys (A to F, L and R), cable collet

~M

~L

ø A

~H

S 1

S 2

S 3

D

M3 Cable assembly (page 172)

21.0 11.5 47 60 40.0 18 15 15

27.5 15.5 57 72 51.5 24 19 20

Dimensions (mm)

A D H L M S1 S2 S3

FHG 3K

FHG 4K

Reference

Model Series

FHG Elbow (90°) plug, key (G) or keys (A to F, L and R), cable collet

Note: 1) maximum length with crimp contacts.

42 www.lemo.com

®®

ø A

e

ø B

S 3

S 1

N

M

E maxi

L maxi

Note: The 5K series is delivered with a round nut.

P1 Panel cut-out (page 159)

18 19.2 M14x1.0 6 21.7 4.0 20.1 12.5 17

20 21.5 M16x1.0 9 27.0 4.5 25.1 14.5 19

25 27.0 M20x1.0 9 30.7 5.0 28.6 18.5 24

31 34.0 M24x1.0 11 36.2 6.0 33.6 22.5 30

37 40.5 M30x1.0 9 40.2 6.5 38.6 28.5 36

55 54.0 M45x1.5 10 47.5 9.0 43.6 42.5 –

Dimensions (mm)

A B e E L M N1) S1 S3

EGG Fixed socket, nut fixing, key (G) or keys (A to F, L and R)

EGG 0K

EGG 1K

EGG 2K

EGG 3K

EGG 4K

EGG 5K

Reference

Model Series

ø A

e

ø B

S 3

S 1

N

M

E maxi

L maxi

ø A

e

ø B

N

P

M

E maxi

L maxi

S 1

Note: The 3K and 4K series are delivered with a conical nut.

P1 Panel cut-out (page 159)

Note: 1) maximum length with crimp contacts.

P1 Panel cut-out (page 159)

31 34 M24x1.0 11.3 36.2 6 33.6 22.5 30

Dimensions (mm)

A B e E L M N1) S1 S3

ENG Fixed socket, nut fixing, key (G) or keys (A to F, L and R) and earthing tag

ENG 3K

Reference

Model Series

18.0 18 M14x1.0 3.4 21.7 3.5 20.1 7.0 12.5

20.0 20 M16x1.0 6.2 27.0 3.5 25.1 10.0 14.5

25.0 25 M20x1.0 5.0 30.7 3.5 28.6 10.0 18.5

30.0 31 M24x1.0 7.5 36.2 4.5 33.6 12.0 22.5

41.5 37 M30x1.0 6.0 40.2 7.0 38.6 13.5 28.5

Dimensions (mm)

A B e E L M N1) P S1

EEG Fixed socket, nut fixing, key (G) or keys (A to F, L and R) (back panel mounting)

EEG 0K

EEG 1K

EEG 2K

EEG 3K

EEG 4K

Reference

Model Series

Note: 1) maximum length with crimp contacts.

43www.lemo.com

®®

ø A

e

ø B

P

M

E maxi

S 1

2

20 mini

N

L

H

A

ø G

M

N

L

ø B

F

Note: 1) maximum length with crimp contacts.

P7 Panel cut-out (page 159)

Note: length «L» depends on the number of contacts, see PCB drilling

pattern page 164.

P17 PCB drilling pattern (page 164)

P1 Panel cut-out (page 159)

18 18 M14x1.0 3.4 3.5 19.3 7 12.5

20 20 M16x1.0 6.2 3.5 24.3 10 14.5

25 25 M20x1.0 5.0 3.5 26.6 10 18.5

30 31 M24x1.0 7.5 4.5 31.3 12 22.5

Dimensions (mm)

A B e E M N P S1

EEG Fixed socket, nut fixing, key (G) or keys (A to F and R) with elbow (90°) contacts for printed circuit

(back panel mounting)

EEG 0K

EEG 1K

EEG 2K

EEG 3K

Reference

Model Series

29 23 3 3.4 23 36.2 6.0 32.6

37 30 3 3.4 29 40.2 6.5 36.6

54 45 4 4.4 44 47.5 8.0 42.1

Dimensions (mm)

A B F G H L M N1)

EBG 3K

EBG 4K

EBG 5K

Reference

Model Series

EBG Fixed socket with square flange, key (G) or keys (A to F, L and R) and screw fixing

ø A

e

ø B

P

M

E maxi

S 1

N

L

Note: The 3K and 4K series are delivered with a conical nut.

P15 PCB drilling pattern (page 160)

P1 Panel cut-out (page 159)

18.0 18 M14x1.0 3.4 3.5 17.6 7.0 12.5

20.0 20 M16x1.0 6.2 3.5 23.8 10.0 14.5

25.0 25 M20x1.0 5.0 3.5 25.8 10.0 18.5

30.0 31 M24x1.0 7.5 4.5 31.3 12.0 22.5

41.5 37 M30x1.0 6.0 7.0 34.3 13.5 28.5

Dimensions (mm)

A B e E M N P S1

EEG Fixed socket, nut fixing, key (G) or keys (A to F and R) with straight print contacts for printed circuit

(back panel mounting)

EEG 0K

EEG 1K

EEG 2K

EEG 3K

EEG 4K

Reference

Model Series

Note: this contact type is available for Ell socket models fitted with female

contact.

Length «L» depends on the number of contacts, see table page 163.

Note: The 3K series is delivered with a conical nut.

44 www.lemo.com

®®

H

A

ø G

M

N

L

ø B

ø C

F

Note: 1) maximum length with crimp contacts.

P7 Panel cut-out (page 159)

EDG Fixed socket with square flange, key (G) or keys (A to F, L and R), protruding shell and earthing tag,

screw fixing

29 18 23 3 3.4 23 36.2 22.5 32.6

Dimensions (mm)

A B C F G H L M N1)

EDG 3K

Reference

Model Series

ø B

e

ø A

M

N

E maxi

L maxi

S 4

S 1S 3

Note: 1) maximum length with crimp contacts.

P1 Panel cut-out (page 159)

18 19.2 M14x1.0 1.5 21.7 10.5 20.1 12.5 17 15

20 21.5 M16x1.0 1.5 27.0 15.5 25.1 14.5 19 17

25 27.0 M20x1.0 1.5 30.7 17.0 27.1 18.5 24 20

Dimensions (mm)

A B e E L M N1) S1 S3 S4

EHG 0K

EHG 1K

EHG 2K

Reference

Model Series

EHG Fixed socket, nut fixing, key (G) or keys (A to F and L), protruding shell

~L

ø A

S 2

M1 Cable assembly (page 172)

13 34.0 8

15 45.0 9

19 54.0 12

23 65.0 15

29 75.5 19

42 95.0 30

Dimensions (mm)

A L S2

PHG 0K

PHG 1K

PHG 2K

PHG 3K

PHG 4K

PHG 5K

Reference

Model Series

PHG Free socket, key (G) or keys (A to F, L and R), cable collet

®®

45www.lemo.com

15 14.5 63 12 12

19 17.0 70 15 15

23 22.0 89 19 19

29 36.0 124 30 32

Dimensions (mm)

A B L S1 S2

PHG 1K

PHG 2K

PHG 3K

PHG 4K

Reference

Model Series

PHG Free socket, key (G) or keys (A to F, L and R), cable collet and oversize cable collet 1)

~L

ø A

ø B

S 1

S 2

M2 Cable assembly (page 173)

Note: 1) correspond to K type of collet, the fitting of oversize collets onto

this model allows them to be fitted to the cables that can be accommodated

by the next housing size up (see page 68).

~L

ø A

S 2

M1 Cable assembly (page 172)

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

13 34.0 7

15 45.0 9

19 54.0 12

23 64.0 15

29 75.5 19

Dimensions (mm)

A L S2

PHG 0K

PHG 1K

PHG 2K

PHG 3K

PHG 4K

Reference

Model Series

PHG Free socket, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief 1)

ø A

e

ø B

S 3

S 1

M

E maxi

~L

S 2

P1 Panel cut-out (page 159)

Note: the 5K series is delivered with a round nut.

M1 Cable assembly (page 172)

18 19.2 M14x1.0 9.0 35.2 4.0 12.5 8 17

20 21.5 M16x1.0 9.5 46.2 4.5 14.5 9 19

25 27.0 M20x1.0 9.0 54.5 5.0 18.5 12 24

31 34.0 M24x1.0 11.5 65.7 6.0 22.5 15 30

37 40.5 M30x1.0 9.0 75.5 6.5 28.5 19 36

55 54.0 M45x1.5 15.0 98.0 9.0 42.5 30 –

Dimensions (mm)

A B e E L M S1 S2 S3

PKG Fixed socket, nut fixing, key (G) or keys (A to F, L and R), cable collet

PKG 0K

PKG 1K

PKG 2K

PKG 3K

PKG 4K

PKG 5K

Reference

Model Series

46 www.lemo.com

®®

ø A

e

ø B

M

P

E maxi

S 1

~L

S 2

H

A

ø G

M

~L

ø C

F

S 2

ø B

P7 Panel cut-out (page 159)

M1 Cable assembly (page 172)

PBG Fixed socket, key (G) with square flange, cable collet and screw fixing

29 19 23 3 3.4 23 65 22.5 15

Dimensions (mm)

A B C F G H L M S2

PBG 3K

Reference

Model Series

P1 Panel cut-out (page 159)

Note: the 3K series is delivered with a conical nut.

M1 Cable assembly (page 172)

18 18 M14x1.0 5.0 34 3.5 8.5 12.5 8

20 20 M16x1.0 6.5 45 3.5 10.0 14.5 9

25 25 M20x1.0 4.0 54 3.5 7.5 18.5 12

30 31 M24x1.0 7.5 65 4.5 12.0 22.5 15

Dimensions (mm)

A B e E L M P S1 S2

PEG Fixed socket, nut fixing, key (G) or keys (A to F, L and R), cable collet (back panel mounting)

PEG 0K

PEG 1K

PEG 2K

PEG 3K

Reference

Model Series

®®

47www.lemo.com

ø A

e

ø B

S 3

S 1

M

E maxi

L maxi

Mechanical and Climatical

Technical Characteristics

These socket and coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC

60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory

equipment, aviation, etc.

These models are identified by a letter «P» at the end of the reference.

Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at

the end of the part number (certificate on request).

Epoxy resin is used to seal these models.

Note: the 5K series is delivered with a round nut.

P1 Panel cut-out (page 159)

Watertight or vacuumtight models

Value Standard

> 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 20° C/+ 100° C

- 20° C/+ 80° C

> 1000h IEC 60512-6 test 11f

20/80/21 IEC 60068-1

< 10-7 mbar.l.s-1 IEC 60512-7 test 14b

Value Standard

60 bar IEC 60512-7 test 14d

40 bar IEC 60512-7 test 14d

30 bar IEC 60512-7 test 14d

15 bar IEC 60512-7 test 14d

5 bar IEC 60512-7 test 14d

Dimensions (mm)

A B e E L M S1 S3

HGG Fixed socket, nut fixing, key (G) or keys (A to F and L), watertight or vacuumtight

HGG 0K

HGG 1K

HGG 2K

HGG 3K

HGG 4K

HGG 5K

Reference

Model Series

18 19.2 M14x1.0 5.5 23.0 4.0 12.5 17

20 21.5 M16x1.0 9.0 30.0 4.5 14.5 19

25 27.0 M20x1.0 13.0 33.7 5.0 18.5 24

31 34.0 M24x1.0 16.0 41.7 6.0 22.5 30

37 40.5 M30x1.0 14.0 49.2 6.5 28.5 36

55 54.0 M45x1.5 10.0 55.7 9.0 42.5 –

Characteristics

Maximum operating

pressure3)

0K

1K

2K

3K

4K

5K

Characteristics

Endurance1)

Humidity

Temperature range

Salt spray corrosion test4)

Climatical category

Leakage rate (He)2)

0K-1K

2K to 5K

ø A

e

ø B

M

P

E maxi

L maxi

S 1

P1 Panel cut-out (page 159)

Dimensions (mm)

A B e E L M P S1

HEG Fixed socket, nut fixing, key (G) or keys (A to F and L), watertight or vacuumtight (back panel mounting)

HEG 0K

HEG 1K

HEG 2K

Reference

Model Series

18 18 M14x1.0 3.4 23.0 3.5 7 12.5

20 20 M16x1.0 6.2 30.0 3.5 10 14.5

25 25 M20x1.0 5.0 33.7 3.5 10 18.5

Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.

2) only for vacuumtight models. Residual traces of grease used during (He) leak testing are on the o-ring. Please contact us for further details.

3) this value corresponds to the maximum allowed pressure difference for the assembled socket. 4) for chrome plated product (« C » material code).

48 www.lemo.com

®®

ø A

e

ø B

S 3 S 1

L

M

E maxi

Contacts Dimensions (mm)

Type A B e E L M S1 S3

Note: for this fixed coupler, the first contact type mentioned is always the one at the flange end.

On request, these couplers can be produced in other series, with other keys.

SGL

SLG

SLC

GL

LG

LC

P1 Panel cut-out (page 159)

Alignment key see page 49.

Example

Plug with key G

SGL

Plug with key L

SGL 2K

SLG 2K

SLG 3K

SLG 4K

SLC 4K

SLG 5K

SLC 5K

Reference

Model Series

female – male 25 27.0 M20x1.0 25 52.4 5.0 18.5 24

male – female 25 27.0 M20x1.0 25 52.4 5.0 18.5 24

male – female 31 34.0 M24x1.0 33 64.0 6.0 22.5 30

male – female 37 40.5 M30x1.0 48 74.0 6.5 28.5 36

male – female 55 54.0 M45x1.5 58 88.0 9.0 42.5 –

SllFixed coupler, nut fixing, key (G) or keys (L) at the flange end, and key (G) or keys (C or L)

at the other end, watertight or vacuumtight

Note: The 5K series is delivered with a round nut.

ø A

e

ø B

M

P

E maxi

L maxi

S 1

HMG Fixed socket with earthing tag, nut fixing, key (G) or keys (A to F and L),

watertight or vacuumtight (back panel mounting)

P1 Panel cut-out (page 159)

Dimensions (mm)

A B e E L M P S1

HMG 1K

HMG 2K

Reference

Model Series

20 20 M16x1.0 6.2 30.0 3.5 10 14.5

25 25 M20x1.0 5.0 33.7 3.5 10 18.5

49www.lemo.com

®®

l

α

β

δ

γ

Note: Sll and TGL models are not available with all the keys. For Sll models see explanation on page 48.

Please consult the pages corresponding to these models.

l First choice alternative

lSpecial order alternative

Front view of a socket

male female

female male

δ

α

γ

β

Front view of a socket

Contact type

Plug Socket

Note

Alignment Key and Polarized Keying System

K series connector model part numbers are composed of three letters. The LAST LETTER indicates the key position and

the contact type (male or female).

Series

0K 1K 2K 3K 4K 5K

Angles

Nb of

keys

Alignment Key (K series)

Ref.

1 – 0° 0° 0° 0° 0° 0°

2 α 30° 30° 30° 30° 30° 30°

2 α 45° 45° 45° 45° 45° 45°

2 α 60° 60° 60° 60° 60° 60°

2 γ 95° 95° 95° 95° 95° 95°

2 β 120° 120° 120° 120° 120° 120°

2 β 145° 145° 145° 145° 145° 145°

2 γ 75° 75° 75° 75° 75° 75°

G

A

B

C

D

E

F

L

l

male female

Contact type

Plug Socket

Note

Series

0K 1K 2K 3K 4K 5K

Angles

Nb of

keys

Ref.

5 α – – – 95° – –

5 β – – – 115° – –

5 γ – – – 35° – –

5 δ – – – 25° – –

R

50 www.lemo.com

®®

51www.lemo.com

T Series

T series connectors have been specically designed for outdoor applications. They include an inner sleeve and seals to

prevent penetration of solids or liquids.This series is watertight when mated to give a protection index of IP68 as per IEC

60529 standard and have the following main features:

– IP68 mated – Same mounting hole as B sockets

– Push-Pull self-latching system – Black-chrome plated brass and plastic outershell

– Mechanical key (FGG) with multiple keys available

to avoid cross-mating – Multipole types 2 to 32 contacts

– High packing density for space savings – For cables 1.0 up to 10.5 mm

– 360° shielding for full EMC shielding – Solder, crimp or print contacts

– Compatible with existing B sockets

FGG

PHG

EGG

EEG

HGG HEG

FFG

FGG EGG HMG

Straight plugs Fixed sockets Free sockets

Metal housing models (page 53)

Straight plug Fixed socket

Plastic housing models (page 56)

Fixed sockets

Watertight or vacuumtight models (page 55)

1

37

2

462 5 4 1 6 9

5

63 7 8 10

Fixed socket

outer shell

earthing crown

hexagonal nut

insulator

female contact

o-ring

locking washer

4

3

6

5

1

2

7

Straight plug

outer shell

latch sleeve

inner shell

insulator

male contact

split insert carrier

earthing cone

gasket

collet

collet nut

4

3

6

5

1

2

7

8

9

10

Part Section Showing Internal Components

®®

www.lemo.com

Insert conguration (page 57)

Series

Model (page 54)

Alignment key (page 52)

Fixed socket

Insulator: PEEK

L = for solder or print contact

Y = for crimp contact

Insulator: PEEK

L = for solder contact

Y = for crimp contact

E G G 1 T 3 0 6 C L L

. . .

EGG.1T.306.CLL = xed socket, nut xing, with key (G), 1T series, multipole type with 6 contacts, outer shell in chrome-plated brass,

PEEK insulator, female solder contacts.

Z

F G G 1 T

Insert conguration (page 57)

Cable ø (page 70)

Collet type (page 70)

Housing:

C = Chrome plated brass

K = Black Chrome plated brass

B = POM (black)

Variant

3 0 6

Series

Model (page 53)

Alignment key (page 52)

C L A C 4 0

Contact:

A = male solder

L = female solder

C = male crimp

M = female crimp

Plug and free socket

Variant

. . .

FGG.1T.306.CLAC40Z = Straight plug with key (G) and cable collet for bend relief, 1T series, multipole type with 6 contacts, outer shell

in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 4.0 mm diameter cable and nut for tting a bend relief.

Part Numbering System

Contact:

L = female solder

A = male solder

M = female crimp

C = male crimp

N = female print

D = male print

V = female elbow print

Housing:

C = Chrome plated brass

K = Black Chrome plated brass

B = POM

5 2

Alignment Key

Key

G

A

J

L

D

Contact type

Plug Socket

male female

female male

G

A

D

L

J

®®

53www.lemo.com

Note:

1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.

2) operating temperature is -20°C, +80°C for watertight or vacuumtight models tted with an FPM (Viton®) o-ring and Epoxy.

3) IP68 achieved providing that the cable is perfectly circular and that assembly process ensures a high integrity seal.

4) average value.

5) depending of the size.

6) for chrome plated product (« C » material code).

Technical Characteristics

Electrical

Note:

the various tests have been carried out with FGG and EGG connector

pairs, with chrome-plated brass shell and PEEK insulator.

Detailed electrical characteristics, as well as materials and treatment are

presented in the chapter Technical Characteristics on page 182.

Mechanical and Climatical

Characteristics Value Standard

> 3000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 55° C, + 200° C / (-20°C, +80°C)

10-2000 Hz, 15g IEC 60512-4 test 6d

100 g, 6 ms IEC 60512-4 test 6c

> 1000h IEC 60512-6 test 11f

IP 68/IP 66 IEC 60529

From 85 N up to 300 N

50/175/21 IEC 60068-1

Endurance 1)

Humidity

Temperature range 2)

Resistance to vibrations

Shock resistance

Salt spray corrosion test 6)

Protection index (mated) 3)

Latching retention force 4) 5)

Climatical category

Value Standard

> 75 dB IEC 60169-1-3

> 40 dB IEC 60169-1-3

Metal housing models

7.0 33.2 25.2 5.5 5

9.5 39.0 29.0 7.5 7

12.0 46.0 35.0 11.0 9

15.0 55.0 43.0 14.0 12

18.8 64.0 49.0 16.0 14

Dimensions (mm)

A L M S1 S2

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

~M

~L

ø A

S 1

S 2

~M

~L

ø A

S 1

S 2

FGG Straight plug, cable collet

7.0 32.7 24.7 5.5 6

9.5 38.0 28.0 7.5 7

12.0 45.0 34.0 11.0 9

15.0 54.0 42.0 14.0 12

18.8 62.0 47.0 16.0 15

Dimensions (mm)

A L M S1 S2

FGG TT

FGG 0T

FGG 1T

FGG 2T

FGG 3T

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

FGG Straight plug, cable collet and nut for tting a bend relief 1)

FGG TT

FGG 0T

FGG 1T

FGG 2T

FGG 3T

Characteristics

Shielding

efciency

at 10 MHz

at 1 GHz

M1 Cable assembly (page 174)

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

®®

54 www.lemo.com

~M

~L

ø A

S 1

S 2

FFG Straight plug, non latching, cable collet

~L

ø A

S 1

S 2

7.0 32.0 5.5 5

9.5 38.0 8.0 7

12.0 43.5 10.0 9

15.0 52.0 14.0 12

18.8 61.5 16.0 14

Dimensions (mm)

A L S1 S2

PHG TT

PHG 0T

PHG 1T

PHG 2T

PHG 3T

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

PHG Free socket, cable collet

7.0 33.2 25.2 5.5 5

9.5 39.0 29.0 8.0 7

12.0 46.0 35.0 10.0 9

15.0 55.0 43.0 13.0 12

18.8 64.0 49.0 16.0 14

Dimensions (mm)

A L M S1 S2

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

FFG TT

FFG 0T

FFG 1T

FFG 2T

FFG 3T

E maxi

N

L maxi

M

ø A

e

ø B

S 1

S 2

EGG Fixed socket, nut xing

EGG TT

EGG 0T

EGG 1T

EGG 2T

EGG 3T

Reference

Model Series

10.0 10.2 M7x0.5 5.5 16.0 1.2 13.5 6.3 9

12.0 12.5 M9x0.6 6.0 21.0 1.5 19.1 8.2 11

15.5 16.0 M12x1.0 6.0 23.0 1.8 21.5 10.5 14

18.5 19.6 M15x1.0 7.5 26.5 1.8 24.6 13.5 17

23.5 25.1 M18x1.0 9.6 30.1 2.5 25.0 16.5 22

Dimensions (mm)

A B e E L M N1) S1 S2

~L

ø A

S 1

S 2

PHG Free socket, cable collet and nut for tting a bend relief 1)

Note: 1) maximum length with crimp contacts.

7.0 31.5 5.5 6

9.5 37.0 8.0 7

12.0 42.5 10.0 9

15.0 51.0 14.0 12

18.8 60.0 16.0 15

Dimensions (mm)

A L S1 S2

PHG TT

PHG 0T

PHG 1T

PHG 2T

PHG 3T

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

P1 Panel cut-out (page 157)

M1 Cable assembly (page 174)

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

®®

55

ø A

L maxi

E maxi

N

P

e

ø B

S 1

EEG Fixed socket, nut xing, back panel mounting

EEG TT

EEG 0T

EEG 1T

EEG 2T

EEG 3T

Reference

Model Series

10.0 10.0 M7x0.5 4.5 16.0 13.5 7 6.3

12.0 12.0 M9x0.6 6.5 21.0 19.1 9 8.2

15.5 16.0 M12x1.0 6.5 23.0 21.5 10 10.5

18.5 20.0 M15x1.0 7.5 26.5 24.6 11 13.5

23.5 24.0 M18x1.0 7.5 30.1 25.0 12 16.5

Dimensions (mm)

A B e E L N1) P S1

Watertight or vacuumtight models

L maxi

N

ø A

E maxi

e

M

ø B

S 1

S 2

HGG Fixed socket, nut xing, watertight or vacuumtight

Reference

Model Series

HGG.0T.305.CLLP (5 contacts, resin potted)

HGG.0T.305.CLLPV (5 contacts, resin potted and vacuumtight tested)

These models are identied by a letter «P» at the end of the reference. Most of these models are also available in a vacuum-

tight version. Such models are identied by an additional letter «V» at the end of the part number (certicate on request).

Epoxy resin is used to seal these models. The temperature range is -20°C / +80°C.

Part Number Example

10.0 10.2 M7x0.5 5.5 18.0 1.2 15.0 6.3 9

12.0 12.5 M9x0.6 6.5 22.0 1.5 18.5 8.2 11

15.5 16.0 M12x1.0 6.0 26.0 1.8 21.5 10.5 14

18.5 19.6 M15x1.0 8.0 30.5 1.8 25.0 13.5 17

Dimensions (mm)

A B e E L M N1) S1 S2

HGG TT

HGG 0T

HGG 1T

HGG 2T

Note: 1) maximum length with crimp contacts.

P1 Panel cut-out (page 157)

P9 Panel cut-out (page 157)

Characteristics Value Standard

60 bar IEC 60512-7 test 14d

40 bar IEC 60512-7 test 14d

Maximum operating

pressure7)

TT

0T

1T

2T

Note:

1) see page 189, contact resistance after mating cycles. See page 185,

mechanical endurance latching force.

2) operating temperature is -20°C, +80°C for watertight or vacuumtight

models tted with an FPM (Viton®) o-ring and Epoxy.

3) IP68 achieved providing that the cable is perfectly circular and that

assembly process ensures a high integrity seal.

4) average value.

5) depending of the size.

6) for chrome plated product (« C » material code).

7) this value corresponds to the maximum allowed pressure difference for

the assembled socket.

Technical Characteristics

Mechanical and Climatical

Characteristics Value Standard

> 3000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

-20°C, +80°C

10-2000 Hz, 15g IEC 60512-4 test 6d

100 g, 6 ms IEC 60512-4 test 6c

> 1000h IEC 60512-6 test 11f

IP 68/IP 66 IEC 60529

From 85 N up to 300 N

50/175/21 IEC 60068-1

< 10-7 mbar.l.s-1 IEC 60512-7 test 14b

Endurance 1)

Humidity

Temperature range 2)

Resistance to vibrations

Shock resistance

Salt spray corrosion test 6)

Protection index (mated) 3)

Latching retention force 4) 5)

Climatical category

Leakage rate (He)

®®

56 www.lemo.com

Plastic housing models

~L

ø A

~M

S 2

FGG 0T

FGG 1T

Reference

Model Series

1.0 5.0

1.3 6.5

Cable ø

min. max.

FGG Straight plug, cable collet and nut for tting a bend relief, POM outer shell 1)

EGG Fixed socket, nut xing, POM outer shell

E maxi

N

L maxi

M

ø A

e

ø B

S 1

S 2

EGG 0T

EGG 1T

Reference

Model Series

12.0 12.5 M9x0.6 6.0 21.0 1.5 19.1 8.2 11

15.5 16.0 M12x1.0 6.0 23.0 1.8 21.5 10.5 14

Dimensions (mm)

A B e E L M N1) S1 S2

9.7 38.5 28.5 8

13.0 45.0 34.0 10

Dimensions (mm)

A L M S2

ø A

L maxi

N

E maxi

P

e

ø B

S 1

HMG Fixed socket with earthing tag, nut xing, watertight or vacuumtight, back panel mounting

HMG TT

HMG 0T

HMG 1T

HMG 2T

Reference

Model Series

10.0 10.0 M7x0.5 4.5 18.0 15.0 7 6.3

12.0 12.0 M9x0.6 6.5 22.0 18.5 9 8.2

15.5 16.0 M12x1.0 6.5 26.0 21.5 10 10.5

18.5 20.0 M15x1.0 7.5 30.5 25.0 11 13.5

Dimensions (mm)

A B e E L N P S1

P9 Panel cut-out (page 157)

M1 Cable assembly (page 174)

Note: 1) maximum length with crimp contacts.

P1 Panel cut-out (page 157)

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

ø A

L maxi

N

E maxi

P

e

ø B

S 1

HEG Fixed socket, nut xing, watertight or vacuumtight, back panel mounting

HEG TT

HEG 0T

HEG 1T

HEG 2T

Reference

Model Series

10.0 10.0 M7x0.5 4.5 18.0 15.0 7 6.3

12.0 12.0 M9x0.6 6.5 22.0 18.5 9 8.2

15.5 16.0 M12x1.0 6.5 26.0 21.5 10 10.5

18.5 20.0 M15x1.0 7.5 30.5 25.0 11 13.5

Dimensions (mm)

A B e E L N P S1

P9 Panel cut-out (page 157)

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)4)

Contact-shell

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)4)

Contact-shell

Rated current (A)1)

57www.lemo.com

®®

0.5 l l l l 30 32 28

0.9 l l l l 20 32 20

1.3 l l l l 20 26 18

2.0 l l l l 16 18 12

3.0 l l l – 12 14 10

6.0 l – – – 8 – –

00-TT

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

5B-5K

Insert configuration (B, K and T series)

302

1.00 0.95 1.15 1.20 3.5

1.00 1.05 1.45 1.20 10.02)

1.50 1.35 1.70 1.45 15.03)

2.10 1.75 2.85 2.70 25.03)

2.10 1.55 2.30 1.80 35.0

3.60 2.95 – – 50.0

2

0.5 l l l l 30 32 28

0.9 l l l l 20 32 20

1.3 l l l l 20 26 18

1.6 l l l l 18 22 14

2.0 l l l l 16 18 12

00-TT

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

303

0.80 0.95 1.35 1.10 3.0

1.20 0.90 1.70 1.60 8.02)

1.30 1.55 1.60 1.85 12.0

2.40 1.85 1.90 1.90 17.03)

1.90 1.50 3.20 2.65 25.0

3

0.5 l l l l 30 32 28

0.7 l l l l 22 32 22

0.9 l l l l 22 32 20

1.3 l l l l 20 26 18

2.0 l l l l 16 18 12

3.0 l l l – 12 14 10

4.0 l l l – 10 12 10

00-TT

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

4B-4K

5B-5K

304

0.80 0.65 1.05 1.05 2.0

0.85 0.70 1.35 1.10 7.02)

1.35 1.45 1.70 1.80 10.02)

1.85 1.85 2.20 2.20 15.03)

1.45 1.25 2.50 2.20 19.0

2.10 1.50 1.80 1.20 30.0

2.95 2.65 3.20 2.40 35.0

4

0.35 l – l – 30 – –00-TT

305 0.70 1.00 – – 1.7

5

Multipole

Reference

Solder contacts

Crimp contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type Solder

contact Crimp

contact

AWG

Crimp

14

2

3

1 4

23

l First choice alternative

lSpecial order alternative Note: 1) see calculation method, caution and suggested standard on page 190.

2) rated current = 6A for socket with elbow (90°) contact for printed circuit.

3) rated current = 12A for socket with elbow (90°) contact for printed circuit.

4) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).

Series

58 www.lemo.com

®®

0.7 l l l l 22 32 22

0.9 l l l l 22 32 20

1.3 l l l l 20 26 18

1.6 l l l l 18 22 14

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

305

1.00 0.70 1.25 1.20 6.52)

1.25 1.15 1.30 1.55 9.02)

1.75 1.60 2.15 2.15 14.03)

1.90 1.25 2.40 1.75 19.0

5

0.5 l l4) l l 28 32 28

0.7 l l l l 22 32 22

0B-0K-0T

1B-1K-1T

306 0.85 0.65 1.40 1.20 2.5

1.05 1.20 1.35 1.45 7.02)

6

0.35 l – – – 30 – –

1.3 l l l l 20 26 18

1.6 l l l l 18 22 14

2.0 l l l – 16 18 12

00-TT

2B-2K-2T

3B-3K-3T

4B-4K

306

0.60 0.75 – – 1.5

1.35 1.45 2.00 2.35 12.0

1.60 1.15 1.90 1.80 17.0

2.00 1.75 2.75 2.40 24.0

6

0.5 l l4) l l 28 32 28

0.7 l l l l 22 32 22

1.3 l l l l 20 26 18

1.6 l l l l 18 22 14

2.0 l l l – 16 18 12

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

4B-4K

307

0.80 0.70 1.40 1.20 2.5

0.95 1.05 1.45 1.45 7.02)

1.75 1.60 1.95 2.15 11.0

1.70 1.25 2.00 2.05 15.0

2.00 1.80 1.50 1.35 20.0

7

Multipole

0.7 l l l l 22 32 221B-1K-1T

308 0.95 1.15 1.30 1.30 5.0

8

0.9 l l l l 22 32 20

1.3 l l l l 20 26 18

2B-2K-2T

3B-3K-3T

308 1.50 1.25 1.95 1.95 10.02)

1.65 1.15 1.85 1.75 13.0

8

l First choice alternative

lSpecial order alternative Note: 1) see calculation method, caution and suggested standard on page 190.

2) rated current = 6A for socket with elbow (90°) contact for printed circuit.

3) rated current = 12A for socket with elbow (90°) contact for printed circuit.

4) available only for connectors fitted with male contacts.

5) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)5)

Contact-shell

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)5)

Contact-shell

Rated current (A)1)

Reference

Solder contacts

Crimp contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type Solder

contact Crimp

contact

AWG

Crimp

14

2

3

14

23

Series

®®

59www.lemo.com

3B-3K-3T

309 6.0

1.35 1.05 1.10 1.05

15.0

8x1.3  20 26 18

l l l –

1x2.0  16 18 12

9

Multipole

0.5 l l3) l l 28 32 280B-0K-0T

309 0.60 0.50 1.00 0.85 2.0

9

0.5 l l3) l l 28 32 28

0.9 l l l l 22 32 20

1.3 l l l l 20 26 18

1.6 l l l–18 22 14

3.0 l l l–12 14 10

1B-1K-1T

2B-2K-2T

3B-3K-3T

4B-4K

5B-5K

310

0.90 1.50 1.20 1.80 2.5

1.45 1.30 1.80 2.10 8.02)

1.25 0.90 1.50 1.80 12.0

1.85 1.30 1.90 1.95 17.0

2.35 2.30 2.65 3.20 20.0

10

0.35 l – l – 30 – –0B-0K-0T

312 0.80 1.00 – – 1.5

12

0.7 l – l –22 32 22XB

312 1.35 1.65 – – 5.0

12

0.7 l l l l 22 32 22

0.9 l l l l 22 32 20

1.3 l l l–20 26 18

2B-2K-2T

3B-3K-3T

4B-4K

312

1.25 1.35 1.65 2.00 7.02)

1.45 1.00 1.65 1.85 9.0

1.45 1.60 1.90 1.85 12.0

12

lFirst choice alternative

Special order alternative

Note: 1) see calculation method, caution and suggested standard on page 190.

2) rated current = 6A for socket with elbow (90°) contact for printed circuit.

3) available only for connectors fitted with male contacts.

4) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)4)

Contact-shell

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)4)

Contact-shell

Rated current (A)1)

Reference

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type Solder

contact Crimp

contact

AWG

Crimp

Series

Solder contacts

Crimp contacts

14

2

3

1 4

23

®®

60 www.lemo.com

0.7 l l l l 22 32 22

0.9 l l l l 22 32 20

0.9 l l l –22 32 20

2.0 l l l–16 18 12

2B-2K-2T

3B-3K-3T

4B-4K

5B-5K

316

0.95 1.25 1.55 1.75 6.0

1.20 0.85 1.80 1.50 8.0

1.35 1.50 2.30 2.10 10.0

1.85 1.95 2.45 3.05 12.0

16

Multipole

0.7 l l l l 22 32 22

0.9 l l l l 22 32 20

2B-2K-2T

3B-3K-3T

318

0.85 1.20 1.45 2.10 5.5

1.20 1.05 1.85 1.60 7.0

18

0.7 l l l l 22 32 222B-2K-2T

319 0.95 1.25 1.55 1.65 5.0

19

0.7 l l l l 22 32 223B-3K-3T

320 1.00 0.90 1.35 1.55 6.0

20

0.5 l l3) l l28 32 281B-1K-1T

316 0.80 1.25 0.95 1.60 1.5

16

0.5 l l3) l l 28 32 28

0.7 l l l l 22 32 22

0.9 l l l l 22 32 20

2.0 l l l–16 18 12

1B-1K-1T

2B-2K-2T

3B-3K-3T

5B-5K

314

0.80 1.20 0.95 1.60 2.0

1.15 1.35 1.55 1.55 6.52)

1.20 1.20 1.80 1.65 9.02)

2.10 2.00 2.85 2.95 18.0

14

lFirst choice alternative

Special order alternative

Note: 1) see calculation method, caution and suggested standard on page 190.

2) rated current = 6A for socket with elbow (90°) contact for printed circuit.

3) available only for connectors fitted with male contacts.

4) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)4)

Contact-shell

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)4)

Contact-shell

Rated current (A)1)

Reference

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type Solder

contact Crimp

contact

AWG

Crimp

Series

Solder contacts

Crimp contacts

14

2

3

1 4

23

®®

61www.lemo.com

0.9 l l l –22 32 20

1.6 l l l–18 22 14

4B-4K

5B-5K

320

1.35 1.00 1.05 0.95 8.0

1.90 1.70 2.20 2.40 10.0

20

0.5 l – l – 28 – –XB

322 0.50 0.90 – – 1.5

22

0.7 l l l l22 32 223B-3K-3T

322 1.00 0.90 1.70 1.45 5.5

22

Multipole

0.7 l l l l 22 32 22

0.9 l l l –22 32 20

3B-3K-3T

4B-4K

324

0.95 0.80 1.35 1.35 4.0

1.20 1.45 1.80 2.05 7.0

24

0.5 l – l l 28 – –

0.7 l l l l 22 32 22

2B-2K-2T

3B-3K-3T

326

0.95 1.30 – – 2.0

0.95 0.70 1.50 1.30 4.0

26

0.7 l l l l 22 32 22

0.9 l l l –22 32 20

1.3 l l l–20 26 18

3B-3K-3T

4B-4K

5B-5K

330

0.80 0.70 1.35 1.20 3.5

0.95 0.85 1.75 1.45 5.0

1.45 1.60 2.05 2.45 8.0

30

lFirst choice alternative

Special order alternative

Note: 1) see calculation method, caution and suggested standard on page 190.

2) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)2)

Contact-shell

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)2)

Contact-shell

Rated current (A)1)

Reference

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type Solder

contact Crimp

contact

AWG

Crimp

Series

Solder contacts

Crimp contacts

14

2

3

1 4

23

®®

62 www.lemo.com

332

32

Multipole

0.5 l – l l 28 – –2B-2K-2T 0.80 1.20 – – 1.5

332

32

0.7 l l l l 22 32 223B-3K 0.75 0.70 – – 3.0

0.7 l l l –22 32 22

1.3 l l l–20 26 18

4B-4K

5B-5K

340

0.90 0.90 1.30 1.30 2.0

1.30 1.45 2.00 1.95 7.0

40

348

48

0.7 l l l –22 32 224B-4K 0.70 0.70 1.00 1.00 1.5

348

48

1.3 l l l –20 26 185B-5K 1.20 1.10 2.00 1.55 6.0

350

50

0.9 l l l –22 32 205B-5K 1.30 1.60 1.20 1.45 6.0

lFirst choice alternative

Special order alternative

Note: 1) see calculation method, caution and suggested standard on page 190.

2) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)2)

Contact-shell

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)2)

Contact-shell

Rated current (A)1)

Reference

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type Solder

contact Crimp

contact

AWG

Crimp

Series

Solder contacts

Crimp contacts

14

2

3

1 4

23

63www.lemo.com

®®

354

54

Multipole

0.9 l l l – 22 32 205B-5K 1.15 1.55 2.00 2.10 5.0

364

64

0.9 l l l – 22 32 205B-5K 1.30 1.55 1.35 1.85 3.0

l First choice alternative

lSpecial order alternative Note: 1)see calculation method, caution and suggested standard on page 190.

2) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)2)

Contact-shell

Test voltage (kV rms)1)

Contact-contact

Test voltage (kV rms)2)

Contact-shell

Rated current (A)1)

Reference

Solder contacts

Crimp contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type Solder

contact Crimp

contact

AWG

Crimp

14

2

3

14

23

Series

C

N

K

S

T

U

L

X

G

P

R

H

P

Outer shell and collet nut Latch sleeve + earthing crown Other metallic components

Material Surf. treatment Material Surf. treatment Material Surf. treatment

64 www.lemo.com

®®

Brass chrome brass/bronze nickel 2) brass nickel l

Brass nickel brass/bronze nickel 2) brass nickel l

Brass black chrome 3) brass/bronze nickel 2) brass nickel l

Stainless steel – brass/bronze nickel 2) brass nickel l

Stainless steel – stainless steel – brass nickel l

Stainless steel – stainless steel – stainless steel – l

Aluminium alloy anodized brass/bronze nickel 2) brass nickel 1) l

Aluminium alloy nickel anthracite brass/bronze nickel 2) brass nickel l

PEEK (natural) – brass/bronze nickel 2) brass nickel Only for FGG and ENG (B series) l

PSU – brass/bronze nickel 2) brass nickel Only for FGY and ENY (B series) 1) l

PPSU – brass/bronze nickel 2) brass nickel Only for FGY and ENY (B series) 1) l

PPS/brass –/nickel brass/bronze nickel 2) brass nickel Only for elbow sockets (B series) l

PA.6 – brass/bronze nickel 2) brass nickel Only for CRF and CRG bridge plug 1) l

Remarks Note

Note: detailed characteristics of these materials and treatments are presented on page 182.

1) see «variant» for the colour.

2)in the K series, the latch sleeve is chrome-plated.

3) surface not conductive use socket with earthing tag (ENland HMlmodel) to carry shield.

Note: detailed characteristics of these materials are presented on page 187.

Crimping characteristics

– practical, quick contact fixing outside the insulator

– possible use at high temperature

– need to order specific tools

– no risk of heating the insulator during the conductor-

contact fixing

– high tensile strength

– totally lead-free solution

Soldering characteristics

– no need to order specific tools, a simple soldering iron

is sufficient

– ideal for very small and fragile conductors

– contacts with solder cups to allow the solder to flow

Note: see page 188 for more information.

Housings (B, K and T series)

Contacts (B, K and T series)

Insulators (B, K and T series)

Y

L

Ref. Material Contact type Remarks Note

PEEK Crimp extended design, with contacts that recess into insulator l

PEEK Solder or print l

Ref.

lFirst choice alternative

lSpecial order alternative

Conductor

Solid Stranded

AWG Section (mm2)

min. max. min. max.

Fr1)

(N)

AWG

max. Section

max.

(mm2)

65www.lemo.com

®

Contacts reference for plugs, free or fixed sockets

Contact

ø A ø C Form

(mm) (mm) per fig.

0.54) 0.45 1

0.7 0.80 1

0.7 0.45 2

0.9 1.10 1

0.9 0.80 2

0.9 0.45 2

1.3 1.40 1

1.3 1.10 2

1.3 0.80 2

1.6 1.90 1

1.6 1.40 2

2.0 2.40 1

2.0 1.90 2

3.0 3.20 1

4.0 4.00 1

Notes

l

ø A

ø C

ø A

ø C

Contact type

– – 32 28 0.035 0.09 12

– – 26 223) 0.140 0.34 22

– – 32 28 0.035 0.09 22

– – 24 20 0.250 0.50 30

– – 26 223) 0.140 0.34 30

– – 32 28 0.035 0.09 30

– – 20 18 0.500 1.00 40

– – 24 20 0.250 0.50 40

– – 26 223) 0.140 0.34 40

– – 18 143) 1.000 1.50 50

– – 22 18 0.340 1.00 50

– – 16 123) 1.500 2.50 65

– – 18 14 1.000 1.50 65

– – 14 103) 2.500 4.00 75

– – 12 10 4.000 6.00 90

ø A

ø C

ø A ø C

fig. 1

fig. 2

Solder

Crimp

28 0.09 – 30 – 0.05 –

28 0.09 – 28 – 0.09 –

22 0.34 – 223) – 0.34 –

225) 0.345) – 223)5) – 0.345) –

20 0.50 – 203) – 0.50 –

16 1.00 – 18 – 1.00 –

14 1.50 – 16 – 1.50 –

10 4.00 – 12 – 4.00 –

10 6.00 – 10 – 6.00 –

– – – 8 – 10.00 –

l

0.35 0.40 –

0.52) 0.402) –

0.5 0.456) –

0.7 0.80 –

0.9 0.805) –

1.3 1.00 –

1.6 1.40 –

2.0 1.80 –

3.0 2.70 –

4.0 3.70 –

6.0 5.20 –

A L

C M

B P

C M

B P

G U

C M

B P

G U

C M

B P

C M

B P

C M

Reference

Male Female

Contacts reference for couplers Rll, Sll and TGL

Contact type Remarks

Male - Female contact configuration is explained on page 24, 33, 48

Female - Male contact configuration is explained on page 24, 33, 48

Female - Female contact configuration is explained on page 24

A

L

M

Ref.

Note:

1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).

2) for 00/TT multipole series.

3) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductor

diameter is smaller than ø C.

4) for 00 /TT multipole series or for 0B/0T and 1B/1T series with male contacts.

5) for 0B.302/0B.303, 0K.302/0K.303 and 0T.302/0T.303 ø C = 1.0 mm, AWG max 20, section max (mm2) 0.50.

6) for 00/TT and 1B/1K/1T series, according to manufacturing and plating tolerance ø C min = 0.43 mm.

lFirst choice alternative

l

Special order alternative

66 www.lemo.com

®®

Conductor

Solid Stranded

AWG Section (mm2)

min. max. min. max.

Fr1)

(N)

AWG

max. Section

max.

(mm2)

Contacts reference for plugs, free or fixed sockets

Contact

ø A ø C Form

(mm) (mm) per fig.

Notes

Contact type

Reference

Male Female

L dimensions and C are detailed in the section on PCB drilling pattern.

See page 163.

L dimensions and C are detailed in the section on PCB drilling pattern.

See page 164.

ø A ø C

ø C

ø A

L

ø C

L

ø A

Note: 1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).

lFirst choice alternative lSpecial order alternative

l

Print

Print (elbow)

D N

V V

67www.lemo.com

®®

D and M type collets for B series

ø B

ø A

ø B

ø A

D type

M type

Note: all dimensions are in millimetres.

1) these collets cannot be used for connector models with nut for fitting a bend relief. No bend relief available for this cable size.

2) the inner diameter of the smallest bend relief available is 2.5 mm (in TPU) / 1.7mm (in silicone).

3) for 0B bend relief.

4) for 1B bend relief.

5) for 2B bend relief.

6) for 4B bend relief.

7) the inner diameter of the largest bend relief available is 14.5 mm.

Collets (B, K and T series)

00 2.2 – 2.2 1.4

2.7 – 2.7 > 2.2

3.5 2.8 3.5 > 2.7

Collet ø Cable ø

ø A ø B max. min.

D 22

D 27

D 35

0B 2.1 – 2.2 1.4

3.2 – 3.2 > 2.2

4.2 – 4.2 > 3.2

5.2 4.7 5.2 > 4.2

5.6 4.7 5.6 > 5.2

2)

1)

D 22

D 32

D 42

D 52

D 56

1B 2.7 – 2.7 > 2.2

3.1 – 3.1 > 2.7

4.2 – 4.2 3.1

5.2 – 5.2 > 4.2

6.2 – 6.2 > 5.2

7.2 6.2 7.2 > 6.2

7.6 6.9 7.6 > 7.2 1)

M 27

M 31

D 42

D 52

D 62

D 72

D 76

XB 5.2 7.2 5.0 4.4

6.2 7.2 6.0 5.4

7.2 7.2 7.0 6.4

8.2 7.2 8.0 7.4 1)

D 52

D 62

D 72

D 82

2B 2.1 – 2.2 1.4

3.1 – 3.2 > 2.2

4.2 – 4.2 > 3.2

5.2 – 5.2 > 4.2

6.2 – 6.2 > 5.2

7.2 – 7.2 > 6.2

8.2 – 8.2 > 7.2

9.2 8.6 9.2 > 8.2

9.9 8.6 9.9 > 9.2

3)

1)

M 21

M 32

D 42

D 52

D 62

D 72

D 82

D 92

D 99

Reference

Type Code

Notes

3B 5.2 – 5.2 > 4.2

6.2 – 6.2 4.9

7.7 – 7.7 > 6.2

9.2 – 9.2 > 7.7

10.2 – 10.0 > 9.2

11.0 – 11.0 > 10.1

12.0 10.2 11.9 10.8

4)

1)

Collet ø Cable ø

ø A ø B max. min.

M 52

D 62

D 72

D 92

D 10

D 11

D 12

4B 6.2 – 6.2 > 5.2

7.2 – 7.2 > 6.2

8.2 – 8.2 > 7.2

9.2 8.6 9.2 > 8.2

10.8 – 10.5 9.1

12.3 – 12.0 10.6

13.8 12.5 13.5 12.1

15.3 12.5 15.0 13.6

16.3 12.5 16.0 15.1

5)

6)

7)

1)

M 62

M 72

M 82

M 92

D 10

D 12

D 13

D 15

D 16

5B 11.8 – 11.5 9.6

13.8 – 13.5 11.6

15.8 – 15.5 13.6

17.8 – 17.5 15.6

19.8 – 19.5 17.6

21.8 – 21.5 19.6

23.8 21.8 23.5 21.6

25.3 21.8 25.0 23.6

7)

1)

D 11

D 13

D 15

D 17

D 19

D 21

D 23

D 25

Reference

Type Code

Notes

®®

68 www.lemo.com

C and K type collets for K series

Note: all dimensions are in millimetres.

1) the inner diameter of the smallest bend relief available is 2.5 mm

(in TPU) / 1.7mm (in silicone).

2) the inner diameter of the largest bend relief available is 14.5 mm.

3) for 2B bend relief.

4) for 3B bend relief.

5) for 4B bend relief.

C type

K type

oversize

cable collet

ø B

ø A

ø B

ø A

0K 1.6 – 1.2 1.0

1.6 – 1.5 1.3

2.1 – 2.0 1.6

3.1 – 2.5 2.1

3.1 – 3.0 2.6

4.2 4.2 3.5 3.1

4.2 4.2 4.0 3.6

5.2 5.2 4.5 4.1

5.2 5.2 5.0 4.6

1)

Collet ø Cable ø

ø A ø B max. min.

C 10

C 15

C 20

C 25

C 30

C 35

C 40

C 45

C 50

1K 1.6 – 1.5 1.3

2.2 – 2.0 1.6

3.2 – 2.5 2.1

3.2 – 3.0 2.6

4.2 – 3.5 3.1

4.2 – 4.0 3.6

5.2 – 4.5 4.1

5.2 – 5.0 4.6

6.2 6.2 5.5 5.1

6.2 6.2 6.0 5.6

7.2 6.7 6.5 6.1

7.2 – 7.0 6.6

8.2 8.2 7.5 7.1

8.2 8.2 8.0 7.6

9.2 8.6 8.5 8.1

3)

C 15

C 20

C 25

C 30

C 35

C 40

C 45

C 50

C 55

C 60

C 65

K 70

K 75

K 80

K 85

Reference

Type Code Notes

2K 7.2 – 7.0 6.6

8.2 8.2 7.5 7.1

8.2 8.2 8.0 7.6

9.2 8.6 8.5 8.1

9.2 – 9.0 8.6

10.2 10.2 9.5 9.1

10.2 10.2 10.0 9.6

11.2 10.6 10.5 10.1

4)

Collet ø Cable ø

ø A ø B max. min.

C 70

C 75

C 80

C 85

K 90

K 95

K 10

K 11

Reference

Type Code Notes

2K 2.2 – 1.5 1.3

2.2 – 2.0 1.6

3.2 – 2.5 2.1

3.2 – 3.0 2.6

4.2 – 3.5 3.1

4.2 – 4.0 3.6

5.2 – 4.5 4.1

5.2 – 5.0 4.6

6.2 – 5.5 5.1

6.2 – 6.0 5.6

7.2 – 6.5 6.1

C 15

C 20

C 25

C 30

C 35

C 40

C 45

C 50

C 55

C 60

C 65

3K 3.2 – 3.0 2.6

4.2 – 3.5 3.1

4.2 – 4.0 3.6

5.2 – 4.5 4.1

5.2 – 5.0 4.6

6.2 – 5.5 5.1

6.2 – 6.0 5.6

7.2 – 6.5 6.1

7.2 – 7.0 6.6

8.2 – 7.5 7.1

8.2 – 8.0 7.6

9.2 – 8.5 8.1

9.2 – 9.0 8.6

10.2 10.2 9.5 9.1

10.2 10.2 10.0 9.6

11.2 10.6 10.5 10.1

12.3 – 12.0 10.6

13.8 13.8 12.8 12.1

13.8 13.8 13.5 12.9

15.3 15.3 14.0 13.6

15.3 15.3 15.0 14.1

5)

2)

C 30

C 35

C 40

C 45

C 50

C 55

C 60

C 65

C 70

C 75

C 80

C 85

C 90

C 95

C 10

C 11

K 11

K 12

K 13

K 14

K 15

69www.lemo.com

®®

C and K type collets for K series

C type

K type

oversize

cable collet

ø B

ø A

ø B

ø A

4K 6.3 – 5.0 4.6

6.3 – 5.5 5.1

6.3 – 6.0 5.6

7.3 – 6.5 6.1

7.3 – 7.0 6.6

8.3 – 7.5 7.1

8.3 – 8.0 7.6

9.3 – 8.5 8.1

9.3 – 9.0 8.6

10.8 – 9.5 9.1

10.8 – 10.5 9.6

12.3 – 12.0 10.6

13.8 13.8 12.8 12.1

13.8 13.8 13.5 12.9

15.3 15.3 14.0 13.6

15.3 15.3 15.0 14.1

17.8 – 16.5 15.6

17.8 – 17.5 16.6

19.8 – 18.5 17.6

19.8 – 19.5 18.6

21.8 – 20.5 19.6

21.8 – 21.5 20.6

23.8 23.8 22.5 21.6

23.8 23.8 23.5 22.6

2)

1)

Collet ø Cable ø

ø A ø B max. min.

C 50

C 55

C 60

C 65

C 70

C 75

C 80

C 85

C 90

C 95

C 10

C 11

C 12

C 13

C 14

C 15

K 16

K 17

K 18

K 19

K 20

K 21

K 22

K 23

Reference

Type Code Notes

5K 11.8 – 10.5 9.6

11.8 – 11.5 10.6

13.8 – 12.5 11.6

13.8 – 13.5 12.6

15.8 – 14.5 13.6

15.8 – 15.5 14.6

17.8 – 16.5 15.6

17.8 – 17.5 16.6

19.8 – 18.5 17.6

19.8 – 19.5 18.6

21.8 – 20.5 19.6

21.8 – 21.5 20.6

23.8 23.8 22.5 21.6

23.8 23.8 23.5 22.6

1)

Collet ø Cable ø

ø A ø B max. min.

C 10

C 11

C 12

C 13

C 14

C 15

C 16

C 17

C 18

C 19

C 20

C 21

C 22

C 23

Reference

Type Code Notes

Note: all dimensions are in millimetres.

1) these collets cannot be used for connector models with nut for fitting a bend relief. No bend relief available for this cable size.

2) the inner diameter of the largest bend relief available is 14.5 mm.

®®

70 www.lemo.com

C and K type collets for T series

C type

1.2 1.0

1.5 1.3

2.0 1.6

2.5 2.1

3.0 2.6

3.5 3.1

4.0 3.6

4.5 4.1

5.0 4.6

5.5 5.1

6.0 5.6

6.5 6.1

Cable ø (mm)

max. min.

Cable ø (mm)

max. min.

3.0 2.6

3.5 3.1

4.0 3.6

4.5 4.1

5.0 4.6

5.5 5.1

6.0 5.6

6.5 6.1

7.0 6.6

7.5 7.1

8.0 7.6

8.5 8.1

9.0 8.6

9.5 9.1

10.0 9.6

10.5 10.1

12.0 10.6

12.8 12.1

13.5 12.9

14.0 13.6

15.0 14.1

1.5 1.3

2.0 1.6

2.5 2.1

3.0 2.6

3.5 3.1

4.0 3.6

4.5 4.1

5.0 4.6

5.5 5.1

6.0 5.6

6.5 6.1

7.0 6.6

7.5 7.1

8.0 7.6

8.5 8.1

4.5 4.1

5.0 4.6

5.5 5.1

6.0 5.6

6.5 6.1

7.0 6.6

7.5 7.1

8.0 7.6

8.5 8.1

9.0 8.6

9.5 9.1

10.0 9.6

10.5 10.1

2.6 2.4

3.0 2.7

TT C 27

C 31

0T C 10

C 15

C 20

C 25

C 30

C 35

C 40

C 45

K 50

K 55

K 60

K 65

1T C 15

C 20

C 25

C 30

C 35

C 40

C 45

C 50

C 55

C 60

C 65

K 70

K 75

K 80

K 85

Reference

Type Code

2T C 45

C 50

C 55

C 60

C 65

C 70

C 75

C 80

C 85

K 90

K 95

K 10

K 11

Reference

Type Code

3T C 30

C 35

C 40

C 45

C 50

C 55

C 60

C 65

C 70

C 75

C 80

C 85

C 90

C 95

C 10

C 11

K 11

K 12

K 13

K 14

K 15 5)

4)

Notes

1)

2)

3)

Notes

Note: all dimensions are in millimetres.

1) the inner diameter of the smallest bend relief available is 2.5 mm (in TPU) / 1.7 mm (in silicone).

2) for 1B bend relief.

3) for 2B bend relief.

4) for 3B bend relief.

5) the inner diameter of the largest bend relief available is 14.5 mm.

1.5 1.3

2.0 1.6

2.5 2.1

3.0 2.6

3.5 3.1

4.0 3.6

2T C 15

C 20

C 25

C 30

C 35

C 40

®®

71www.lemo.com

Bend relief for B series models with collet

Need to be ordered

GMA.00.lll.ll

GMB.00.lll.ll

D 22 to 35

GMA.0B.lll.ll D 22 to 52

00

Need to be ordered

separately

(see pages 145 and 146)

Z

0B Z

Ref.

Collet

Type Code

Variant

(B, K and T series)

1B Z

GMA.1B.lll.ll

M 27 and 31

D 42 to 72

GMA.1B.lll.ll D 52 to 72

XB Z

2B Z

GMA.0B.lll.ll

GMA.2B.lll.ll

M 21 and 32

D 42 to 92

3B Z

GMA.1B.lll.ll

GMA.3B.lll.ll

M 52

D 62 to 10

4B Z

GMA.2B.lll.ll

GMA.4B.lll.ll

M 62 to 82

M 92

D 10 to 15 1)

GMA.4B.lll.ll D 11 to 15 1)

5B Z

Bend relief for K series models with collet

Need to be ordered

GMA.0B.lll.ll C 10 to 50

0K

Need to be ordered

separately

(see pages 145 and 146)

Z

Ref.

Collet

Type Code

1K Z

GMA.1B.lll.ll

GMA.2B.lll.ll

C 15 to 65

K 70 to 85

2K Z

GMA.2B.lll.ll

GMA.3B.lll.ll

C 15 to 85

K 90 to 10

3K Z

GMA.3B.lll.ll

GMA.4B.lll.ll

C 30 to 10

K 11 to 15 2)

GMA.4B.lll.ll

C 50 to 15 3)

4K Z

GMA.4B.lll.ll C 10 to 14

5K Z

Bend relief for T series models with collet

Need to be ordered

GMB.00.lll.ll C 27 and 31

TT

Need to be ordered

separately

(see pages 145 and 146)

Z

Ref.

Collet

Type Code

Need to be ordered

separately

(see pages 145 and 146)

Ref.

Collet

Type Code

1T Z

GMA.1B.lll.ll

GMA.2B.lll.ll

C 15 to 65

K 70 to 85

2T Z

GMA.2B.lll.ll

GMA.3B.lll.ll

C 15 to 85

K 90 to 10

3T Z

GMA.3B.lll.ll

GMA.4B.lll.ll

C 30 to 10

K 11 to 15 4)

Note: all dimensions are in millimetres.

1) for D15 see page 67.

2) for K15 see page 68.

3) for C15 see page 69.

Note: all dimensions are in millimetres.

4) for K15 see page 70.

0T Z

GMA.0B.lll.ll

GMA.1B.lll.ll

C 10 to 45

K 50 to 65

72 www.lemo.com

®®

Bridge plug and plastic shell Aluminium alloys

PSU PPSU PA.6 Anodized colour Anodized colour

for bend relief collet nut

Watertight and vacumtight socket and coupler

models (B, K and T series)

Colour of the bridge plug shells and connectors shell made of plastic material and aluminium alloys

Colour

Note: other anodizing colours are available for

connectors with collet nut for bend relief. Please

consult us.

O-ring and gasket material (K and T series)

Standard connectors are delivered with silicone o-ring and

gaskets. The vacuumtight models, identified with the letter

«PV», are delivered with Viton®gaskets. Other gaskets

material can be delivered upon special request.

A

B

G

J

M

N

R

S

T

V

L

X

F

Ref.

l l

l

l l

l

l l

l

blue

white

grey

yellow

brown

black

red

orange

natural

green

black

natural

cream

B P PV

Reference

Watertight Vacuumtight

YHl, HGl, HNl, HHl,

HCl, HEl, HMl, Sll

K P PV HGl, HEl, Sll

T P PV HGl, HEl, HMl

Model

H

E

D

Ref. O-ring material

FPM (Viton®)

EPDM

FPM (Viton®) and collet nut for bend relief

S SERIES

E SERIES (watertight)

FTA*

HGP

HGW

EWB

FFA, FFP*

FFA

FFF

FFS

FZP*

FAA

FFB

PCA, PCP*

PCA

PSS

PZP*

SWH

RAD

RMA

FFE

FFL*

ERN

FFL

ERA

ERC

ERN

EBD*

EBS*

ERS*

EBC*

ECP

ERD

EEP

PSA, PSP

EHP

EPL EXP

HCP

FFA, FFP

FFP

FLA

FLM

FLS

FGZ PGZ

74 www.lemo.com

®®

S series connectors have main features as follows:

– security of the Push-Pull self-latching system – solder or print contacts (straight or elbow)

– unipole types transmitting current up to 230 A – polarisation by stepped insert (half-moon)

and multipole types with up to 106 contacts fitted with male and female contacts

– 360° screening for full EMC shielding.

Watertight or vacuumtight models (page 91)

Elbow socket models (page 87)

Plastic housing models (page 89)

Fixed socketsFixed socketStraight plugs

New design models (page 86)

Free socketsStraight plugs

Fixed coupler

Straight plugs Fixed sockets Free sockets

Fixed sockets

T-plug

Fixed plug

Elbow plugs

Elbow sockets

Free coupler

Fixed coupler

S Series

Metal housing models (page 76)

Note: * Contact LEMO for details.

75www.lemo.com

®®

Part Section Showing Internal Components

143

6528

4

3

1

2

6

5

7

8

4

3

1

2

6

5

7

8

15

47

23

687

Fixed socket

outer shell

earthing crown

retaining ring

hexagonal nut

locking washer

insulator

male contact

female contact

Straight plug

outer shell

latch sleeve

collet nut

centre-piece

insulator

male contact

female contact

collet

FFA.1S.304.CLAC32 = straight plug with cable collet, 1S series, multipole type with 4 contacts, outer shell in chrome-plated brass,

PEEK insulator, 2 male and 2 female solder contacts, C type collet for a 3.2 mm diameter cable.

ERA.1S.304.CLL = fixed socket, nut fixing, 1S series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK insulator,

2 female and 2 male solder contacts.

RAD.1S.304.CLL = straight coupler, nut fixing, 1S series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK

insulator, 2 female and 2 male contacts each end.

PCA.1S.304.CLLC32Z = free socket, with cable collet, 1S series, multipole type with 4 contacts, outer shell in chrome-plated brass,

PEEK insulator, 2 female and 2 male solder contacts, C type collet for a 3.2 mm diameter cable and nut for fitting a bend relief.

Fixed socket

Part Numbering System

Plug

F F A 1S

Cable ø: (page 115)

Collet type: (page 115)

Variant: (page 121)

3 0 4

Insert configuration: (p. 103)

Model: (page 76)

Series: (page 76)

C L A C 3 2

Contact: (page 112)

Insulator: (page 112)

Housing: (page 112)

Variant: (page 121)

...

Free socket Z

P C A 1S 3 0 4 C L L C 3 2

.. .

E R A 1S 3 0 4 C L L

.. .

Coupler

R A D 1S 3 0 4 C L L

.. .

®®

76 www.lemo.com

S 2

~M

~L

ø A

S 2 S 1

~M

~L

ø A

ø B

Note: 1) correspond to K type of collet, the fitting of oversize collets onto

this model allows them to be fitted to the cables that can be accommodated

by the next housing size up (see page 115).

M2 Cable assembly (pages 175 and 178)

Metal housing models

Technical Characteristics

Electrical

Note:

The various tests have been carried out with FFA and ERA connector

pairs, with chrome-plated brass shell and PEEK insulator.

Detailed electrical characteristics, as well as materials and treatment are

presented in the chapter Technical Characteristics on page 182.

1) see page 189, contact resistance after mating cycles. See page 185,

mechanical endurance latching force.

2) for chrome plated product (« C » material code).

Mechanical and Climatical

M1 Cable assembly (pages 175 to 177)

Characteristics Value Standard

> 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 55° C, + 250° C

10-2000 Hz, 15g IEC 60512-4 test 6d

100 g, 6 ms IEC 60512-4 test 6c

> 1000h IEC 60512-6 test 11f

IP 50 IEC 60529

55/175/21 IEC 60068-1

Endurance1)

Humidity

Temperature range

Resistance to vibrations

Shock resistance

Salt spray corrosion test2)

Protection index (mated)

Climatical category

Value Standard

> 75 dB IEC 60169-1-3

> 40 dB IEC 60169-1-3

6.4 26.0 18.0 4.5

9.0 34.5 24.5 6.5

12.0 42.5 31.5 8.5

14.8 52.0 40.0 11.0

17.8 61.0 46.0 14.0

24.8 77.0 59.0 19.0

35.0 103.0 78.0 29.0

46.0 106.0 81.0 38.0

Dimensions (mm)

A L M S2

FFA 00

FFA 0S

FFA 1S

FFA 2S

FFA 3S

FFA 4S

FFA 5S

FFA 6S

Reference

Model Series

FFA Straight plug, cable collet

6.4 8.0 34.0 26.0 7.0 6.5

9.0 10.0 45.5 35.5 9.0 8.5

12.0 13.0 57.0 46.0 12.0 11.0

14.8 18.0 67.0 55.0 14.0 14.0

17.8 21.0 85.0 70.0 19.0 19.0

24.8 31.8 107.0 89.0 28.5 29.0

35.0 41.8 138.0 113.0 37.5 38.0

Dimensions (mm)

A B L M S1 S2

FFA 00

FFA 0S

FFA 1S

FFA 2S

FFA 3S

FFA 4S

FFA 5S

Reference

Model Series

FFA Straight plug with oversize cable collet 1)

Characteristics

Shielding

efficiency

at 10 MHz

at 1 GHz

77www.lemo.com

®®

S 2

~M

~L

ø A

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

M1 Cable assembly (pages 175 and 176)

6.4 26.0 18.0 6

9.0 34.5 24.5 7

12.0 42.5 31.5 9

14.8 52.0 40.0 12

17.8 61.0 46.0 14

24.8 77.0 59.0 20

Dimensions (mm)

A L M S2

FFA 00

FFA 0S

FFA 1S

FFA 2S

FFA 3S

FFA 4S

Reference

Model Series

FFA Straight plug, cable collet and nut for fitting a bend relief 1)

S 2

~M

~L

ø A

~M

~L

S 2

Note: nut for fitting a bend relief (available only for size 1S).

M1 Cable assembly (pages 175 and 176)

9.0 36.8 26.8 6.5

12.0 45.0 34.0 8.5

14.8 55.5 43.5 11.0

17.8 65.0 50.0 14.0

Dimensions (mm)

A L M S2

FFB 0S

FFB 1S

FFB 2S

FFB 3S

Reference

Model Series

FFB Straight plug, cable collet and safety locking ring

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

M1 Cable assembly (pages 175 and 176)

7.4 26.0 18.0 6

10.0 34.5 24.5 7

13.0 42.5 31.5 9

16.0 52.0 40.0 12

19.0 61.0 46.0 14

Dimensions (mm)

A L M S2

FFE 00

FFE 0S

FFE 1S

FFE 2S

FFE 3S

Reference

Model Series

FFE Straight plug, cable collet, front seal and nut for fitting a bend relief 1) (protected to IP54 when mated)

78 www.lemo.com

®®

M

L maxi

ø B

E maxi

e

S 1

S 3

ø A

Note: 1) unipole model

M

L

ø A

S 2S 1

S 2

~M

~L

ø A

Note: Model available only with crimp backnut E31 similar to 00.250 series.

P1 Panel cut-out (page 158)

P2 Panel cut-out 6S series (page 158)

M5 Cable assembly (page 175)

M1 Cable assembly (pages 175 and 176)

6.4 26.0 18.0 4.5

9.0 34.5 24.5 6.5

12.0 42.5 31.5 8.5

14.8 52.0 40.0 11.0

Dimensions (mm)

A L M S2

FFF 00

FFF 0S

FFF 1S

FFF 2S

Reference

Model Series

FFF Straight plug, non-latching, cable collet

6.4 31 23 5.5 5.5

Dimensions (mm)

A L M S1 S2

FFS 00

Reference

Model Series

FFS Straight plug for cable crimping

8 10.2 M7x0.5 2.0 – 15.5 9.0 6.3 9

10 12.4 M9x0.6 2.0 18.5 18.0 11.2 8.2 11

14 15.8 M12x1.0 2.5 22.5 21.7 12.5 10.5 14

18 19.2 M15x1.0 4.0 25.0 25.3 13.8 13.5 17

22 25.0 M18x1.0 4.0 31.0 29.0 17.0 16.5 22

28 34.0 M25x1.0 2.5 35.5 39.0 20.5 23.5 30

40 40.0 M35x1.0 2.5 45.0 – 28.0 33.5 –

54 54.0 M48x1.5 2.5 45.0 – 28.0 – –

Dimensions (mm)

A B e E L L1) M S1 S3

FAA 00

FAA 0S

FAA 1S

FAA 2S

FAA 3S

FAA 4S

FAA 5S

FAA 6S

Reference

Model Series

FAA Fixed plug non-latching, nut fixing

79www.lemo.com

®®

~H

L

M

ø A

S 1

S 2

M3 Cable assembly (pages 175 to 177)

Note: FLC.00 model is used for the unipole type.

For 0S, 1S and 2S series use «D» type collet, see page 67.

7.5 16.5 19.5 11.5 4.5 6

9.5 23.0 30.0 20.0 7.0 8

12.0 29.0 36.0 25.0 9.0 10

14.8 35.0 41.5 29.5 12.0 13

Dimensions (mm)

A H L M S1 S2

FLC 00

FLM 0S

FLM 1S

FLM 2S

Reference

Model Series

FLC/FLM Elbow (90°) plug, cable collet

~H

S 1

S 2

L

MA A 1

fig. 1 fig. 2

Note:

fig. 1 is used for the unipole type, fig. 2 is used for the multipole type.

l Maximum operating temperature: 120°C

M3 Cable assembly (pages 175 to 177)

FLA Elbow (90°) plug, cable collet

21 21 44.0 38.5 23.5 15 14

28 28 56.0 49.0 31.0 20 19

– 37 76.5 65.0 40.0 30 29

– 48 94.0 81.0 56.0 40 38

Dimensions (mm)

A A1 H L M S1 S2

FLA 3S

FLA 4S

FLA 5S

FLA 6S

Reference

Model Series

H

M

L

A

Note: Model available only with crimp backnut E31 similar to 00.250 series.

l Maximum operating temperature: 120°C

M6 Cable assembly (page 175)

9 16 17.5 9.5

Dimensions (mm)

A H L M

FLS 00

Reference

Model Series

FLS Elbow (90°) plug for cable crimping

80 www.lemo.com

®®

ø B

e

S 1

S 3

ø A

E maxi

L maxi

M

F

L maxi

ø B

e

S 1

S 3

ø A

E maxi

M

Note: 1) unipole model

P1 Panel cut-out (page 158)

L maxi

ø B

E maxi

e

S 1

S 3

ø A

M

Note: 1)unipole model.

P1 Panel cut-out (page 158)

8 10.2 M7x0.5 5.5 – 14.5 1.0 6.3 9

10 12.4 M9x0.6 7.0 17.5 18.0 1.2 8.2 11

14 15.8 M12x1.0 7.5 21.0 20.5 1.5 10.5 14

18 19.2 M15x1.0 8.5 24.5 23.5 1.8 13.5 17

22 25.0 M18x1.0 11.5 29.0 27.5 2.0 16.5 22

28 34.0 M25x1.0 12.0 34.0 33.5 2.5 23.5 30

40 40.0 M35x1.0 15.5 45.0 78.5 3.0 33.5 –

54 54.0 M48x1.5 16.0 45.0 – 3.5 45.5 –

Dimensions (mm)

A B e E L L1) M S1 S3

ERA 00

ERA 0S

ERA 1S

ERA 2S

ERA 3S

ERA 4S

ERA 5S

ERA 6S

Reference

Model Series

ERA Fixed socket, nut fixing

10 12.4 M9x0.6 7.0 19.3 19.3 1.2 8.2 11

14 15.8 M12x1.0 7.5 22.4 22.4 1.5 10.5 14

18 19.2 M15x1.0 8.5 26.3 26.3 1.8 13.5 17

22 25.0 M18x1.0 11.5 29.8 29.8 2.0 16.5 22

Dimensions (mm)

A B e E L L1) M S1 S3

ERN 0S

ERN 1S

ERN 2S

ERN 3S

Reference

Model Series

ERN Fixed socket, nut fixing, with earthing tag

Note: 1) unipole model.

P1 Panel cut-out (page 158)

8 10.2 M7x0.5 5.5 1.6 – 14.5 1.0 6.3 9

10 12.4 M9x0.6 7.0 2.0 17.5 18.0 1.2 8.2 11

14 15.8 M12x1.0 7.5 2.5 20.2 20.5 1.5 10.5 14

Dimensions (mm)

A B e E F L L1) M S1 S3

ERC Fixed socket, nut fixing with slot in the flange

ERC 00

ERC 0S

ERC 1S

Reference

Model Series

Note: The 5S series is delivered with a tapered washer and a round nut.

The 6S series is delivered without a locking washer and with a round nut.

81www.lemo.com

®®

M

L maxi

ø B

E maxi

e

S 3

ø A

S 1

Note: 1) unipole model

P2 Panel cut-out (page 158)

P1 Panel cut-out 0S series (page 158)

EHP Fixed socket, nut fixing, protruding shell

10 12.4 M9x0.6 2.0 20.5 18.0 12.5 8.2 11

14 15.8 M12x1.0 3.5 20.2 20.5 12.0 – 14

22 25.0 M18x1.0 4.0 29.0 29.0 18.7 – 22

Dimensions (mm)

A B e E L L1) M S1 S3

EHP 0S

EHP 1S

EHP 3S

Reference

Model Series

ø A

S 2

L maxi

M

P

S 1

ø B

E maxi

e

Note: 1) unipole model.

P1 Panel cut-out (page 158)

16 16.0 M12x1.0 6.5 20.2 20.5 3.5 11 10.5 13

20 19.5 M15x1.0 4.3 24.5 23.5 3.5 9 13.5 15

Dimensions (mm)

A B e E L L1) M P S1 S2

EEP Fixed socket, nut fixing (back panel mounting)

EEP 1S

EEP 2S

Reference

Model Series

ø A

e

ø B

S 3

L maxi

M

E maxi

S 1

Note: 1) unipole model.

P1 Panel cut-out (page 158)

12 12.4 M9x0.6 5.5 17.5 18.0 2.5 8.2 11

16 15.8 M12x1.0 6.0 20.2 20.5 3.5 10.5 14

20 19.2 M15x1.0 6.5 24.5 23.5 3.5 13.5 17

24 25.0 M18x1.0 9.0 29.0 27.5 4.5 16.5 22

30 34.0 M25x1.0 10.0 34.0 33.5 4.5 23.5 30

Dimensions (mm)

A B e E L L1) M S1 S3

ERD 0S

ERD 1S

ERD 2S

ERD 3S

ERD 4S

Reference

Model Series

ERD Fixed socket with two nuts (back panel mounting)

Note: The 3S and 4S series are delivered with a conical nut.

®®

82 www.lemo.com

ø A

e

ø B

S 3

N

M

E maxi

S 1

L

Note: this contact type is available for all Ell socket models.

See page 167 for table of available types.

Length «L» depends on the number of contacts, see table on page 167.

ø A

e

ø B

S 3

N

M

S 1

E maxi

2

20 mini

L

Note: The 3S series is delivered with a conical nut.

ø A

e

ø B

S 3

L maxi

M

E maxi

S 1

Note: 1) unipole model.

P1 Panel cut-out (page 158)

P24 PCB drilling pattern (page 168)

P21 PCB drilling pattern (page 166)

12 12.4 M9x0.6 8.5 17.5 18.5 2.5 8.2 11

16 15.8 M12x1.0 10.0 20.2 20.5 3.5 10.5 14

20 19.2 M15x1.0 11.0 24.5 26.0 3.5 13.5 17

24 25.0 M18x1.0 14.0 29.0 30.0 4.5 16.5 22

Dimensions (mm)

A B e E L L1) M S1 S3

ECP 0S

ECP 1S

ECP 2S

ECP 3S

Reference

Model Series

ECP Fixed socket with two nuts, long threaded shell (back panel mounting)

12 12.4 M9x0.6 8.5 2.5 15.0 8.2 11

16 15.8 M12x1.0 10.0 3.5 17.5 10.5 14

20 19.2 M15x1.0 11.0 3.5 20.0 13.5 17

24 25.0 M18x1.0 14.0 4.5 24.0 16.5 22

Dimensions (mm)

A B e E M N S1 S3

ECP 0S

ECP 1S

ECP 2S

ECP 3S

Reference

Model Series

ECP Fixed socket with two nuts, long threaded shell, straight contact for printed circuit (back panel mounting)

12 12.4 M9x0.6 8.5 2.5 15.0 8.2 11

16 15.8 M12x1.0 10.0 3.5 17.5 10.5 14

20 19.2 M15x1.0 11.0 3.5 20.0 13.5 17

24 25.0 M18x1.0 14.0 4.5 24.0 16.5 22

Dimensions (mm)

A B e E M N S1 S3

ECP 0S

ECP 1S

ECP 2S

ECP 3S

Reference

Model Series

ECP Fixed socket with two nuts, long threaded shell, elbow (90°) contacts for printed circuit (back panel mounting)

Note: The 3S series is delivered with a conical nut.

Note: this contact type is available for all back panel mounting socket

types. See page 168 for available types.

Length «L» depends on the number of contacts, see PCB drilling pattern

on page 168.

83www.lemo.com

®®

S 2

~L

ø A

M1 Cable assembly (pages 175 to 177)

6.5 25.0 4.5

8.9 33.5 6.5

11.9 40.5 8.5

14.8 50.0 11.0

17.8 59.0 14.0

24.8 75.0 19.0

34.7 99.0 29.0

46.0 102.0 38.0

Dimensions (mm)

A L S2

PCA 00

PCA 0S

PCA 1S

PCA 2S

PCA 3S

PCA 4S

PCA 5S

PCA 6S

Reference

Model Series

PCA Free socket, cable collet

ø B

S 2 S 1

~L

ø A

S 2

~L

ø A

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

Note: 1) correspond to K type of collet, the fitting of oversize collets onto

this model allows them to be fitted to the cables that can be accommodated

by the next housing size up (see page 115).

M2 Cable assembly (pages 175 and 178)

6.5 8.0 33.0 7.0 6.5

8.9 10.0 44.5 9.0 8.5

11.9 13.0 55.0 12.0 11.0

14.8 18.0 65.0 14.0 14.0

17.8 21.0 83.0 19.0 19.0

24.8 31.8 105.0 28.5 29.0

Dimensions (mm)

A B L S1 S2

PCA 00

PCA 0S

PCA 1S

PCA 2S

PCA 3S

PCA 4S

Reference

Model Series

PCA Free socket with oversize cable collet 1)

M1 Cable assembly (pages 175 and 176)

6.5 25.0 6

8.9 33.5 7

11.9 40.5 9

14.8 50.0 12

17.8 59.0 14

24.8 75.0 20

Dimensions (mm)

A L S2

PCA 00

PCA 0S

PCA 1S

PCA 2S

PCA 3S

PCA 4S

Reference

Model Series

PCA Free socket, cable collet and nut for fitting a bend relief 1)

84 www.lemo.com

®®

ø B

E maxi

e

S 1

S 3

ø A

M

~L

S 2

ø B

E maxi

e

S 1

S 3

ø A

M

~L

S 2

Note: the 5S series is delivered with a tapered washer and a round nut.

The 6S series is delivered without a locking washer and with a round nut.

P1 Panel cut-out (page 158)

M1 Cable assembly (pages 175 and 176)

M1 Cable assembly (pages 175 to 177)

8 10.2 M7x0.5 5.5 25.0 1.0 6.3 4.5 9

10 12.4 M9x0.6 7.0 33.5 1.2 8.2 6.5 11

14 15.8 M12x1.0 7.5 40.5 1.5 10.5 8.5 14

18 19.2 M15x1.0 8.5 50.0 1.8 13.5 11.0 17

22 25.0 M18x1.0 11.5 59.0 2.0 16.5 14.0 22

28 34.0 M25x1.0 12.0 75.0 2.5 23.5 19.0 30

40 40.0 M35x1.0 15.5 99.0 3.0 33.5 29.0 –

54 54.0 M48x1.5 16.0 102.0 3.5 45.5 38.0 –

Dimensions (mm)

A B e E L M S1 S2 S3

PSA 00

PSA 0S

PSA 1S

PSA 2S

PSA 3S

PSA 4S

PSA 5S

PSA 6S

Reference

Model Series

PSA Fixed socket, nut fixing, cable collet

18 19.2 M15x1.0 8.5 50.0 1.8 13.5 11.0 17

22 25.0 M18x1.0 11.5 59.0 2.0 16.5 14.0 22

28 34.0 M25x1.0 12.0 75.0 2.5 23.5 19.0 30

Dimensions (mm)

A B e E L M S1 S2 S3

PSP 2S

PSP 3S

PSP 4S

Reference

Model Series

PSP Fixed socket, nut fixing, cable collet and inner anti-rotating device

L

ø B

E maxi S 1

S 3

ø A

M

S 2

e

Note: Model available only with crimp backnut E31 similar to 00.250 series.

P1 Panel cut-out (page 158)

M5 Cable assembly (page 175)

8 10.2 M7x0.5 5.5 30 1 6.3 5.5 9

Dimensions (mm)

A B e E L M S1 S2 S3

PSS 00

Reference

Model Series

PSS Free socket, nut fixing for cable crimping

85www.lemo.com

®®

ø B

E maxi

e

S 1

S 3

ø A

M

L

~L

ø A

Note: see page 114 for the available plug and contact configurations and

in order to ensure correct contact alignment.

Note: the 5S series is delivered with a tapered washer and a round nut.

P1 Panel cut-out (page 158)

P2 Panel cut-out 4S and 5S series (page 158)

6.4 22.0

8.9 25.0

11.9 28.5

14.8 31.5

17.8 38.5

24.8 46.5

34.7 60.5

Dim. (mm)

A L

RMA 00

RMA 0S

RMA 1S

RMA 2S

RMA 3S

RMA 4S

RMA 5S

Reference

Model Series

RMA Free coupler

RAD 00

RAD 0S

RAD 1S

RAD 2S

RAD 3S

RAD 4S

RAD 5S

Reference

Model Series

RAD Fixed coupler, nut fixing

8 10.2 M7x0.5 5.5 22.0 1.0 6.3 9

10 12.4 M9x0.6 7.0 25.0 1.2 8.2 11

14 15.8 M12x1.0 7.5 28.5 1.5 10.5 14

18 19.2 M15x1.0 8.5 31.5 1.8 13.5 17

22 25.0 M18x1.0 11.5 38.5 2.0 16.5 22

28 34.0 M25x1.0 12.0 46.5 2.5 – 30

40 40.0 M35x1.0 15.5 60.5 3.0 – –

Dimensions (mm)

A B e E L M S1 S2

Note: See page 114 for the available plug and contact configurations

and in order to ensure correct contact alignment.

86 www.lemo.com

®

~M

~L

ø A

S 1

S 2

FGZ Straight plug, cable collet

9.5 36 26 8 7

12.0 43 32 10 9

15.0 50 38 13 12

Dimensions (mm)

A L M S1 S2

FGZ 0S

FGZ 1S

FGZ 2S

Reference

Model Series

S 2

~M

~L

S 1

ø A

FGZ Straight plug, cable collet and nut for fitting a bend relief 1)

9.5 35 25 8 7

12.0 42 31 10 9

15.0 49 37 13 12

Dimensions (mm)

A L M S1 S2

FGZ 0S

FGZ 1S

FGZ 2S

Reference

Model Series

Note: D type collets of the B series are used in this model (see page 67).

M1 Cable assembly (page 169)

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

~L

ø A

S 2 S 1

PGZ Free socket, cable collet

9.5 35.5 8 7

12.5 40.5 10 9

15.0 49.0 13 12

Dim. (mm)

A L S1 S2

PGZ 0S

PGZ 1S

PGZ 2S

Reference

Model Series

Note: D type collets of the B series are used in this model (see page 67).

M1 Cable assembly (page 169)

~L

S 2 S 1

ø A

PGZ Free socket, cable collet and nut for fitting a bend relief 1)

9.5 34.5 8 7

12.5 39.5 10 9

15.0 48.0 13 12

Dim. (mm)

A L S1 S2

PGZ 0S

PGZ 1S

PGZ 2S

Reference

Model Series

Note: D type collets of the B series are used in this model (see page 67).

M1 Cable assembly (page 169)

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

New design models

87www.lemo.com

®®

Elbow socket models

4

1 2 3

6 5 4

1 2 3

5 4

2 3

1

2

1

2

302

303

304

306

305

3

1

2

3

4

5

6

0S, 1S

1S

Types

Technical Characteristics

Types

Test voltage

(kV rms)1)

Rated

current (A)

Electrical

1.20 4.5

0.70 4.5

302-303-304

305-306

Note: 1) see calculation method, caution and suggested standard on

page 190.

Materials and Treatment

Note: 1) not used for all sizes.

The surface treatment standards are as follows:

– Nickel SAE AMS QQ N 290

– Gold: ISO 27874

Series Type

3.2

L

ø A

H

I

K

N

M 1.6

7.62

ø 0.7 D

Note: to replace the 4 ground pins by 4 screws (M1.6) add an «S» to the

end of the part number. (e.g.: EPL.1S.303.HLNS)

P22 PCB drilling pattern (page 168)

Material

Surface

Treat. (µm)

Cu Ni Au

Housing

Metallic parts

Earthing crown

Insulator

Female contact

Component

PPS 1) –

Brass 0.5 3 –

Bronze 0.5 3 –

PEEK –

Bronze 0.5 3 1.5

EPL 0S

EXP 0S

EPL 1S

EXP 1S

EPL 1S

EXP 1S

Model Series

EPL Elbow (90°) socket for printed circuit (solder or screw fixing)

9 14.6 6.7 12.6 13.3 25 11.7

11 16.6 7.5 14.0 13.3 27 12.6

Dimensions (mm)

A D H I K L N

EPL.0S.302.HLN

EPL.0S.303.HLN

EPL.0S.304.HLN

EPL.1S.302.HLN

EPL.1S.303.HLN

EPL.1S.304.HLN

EPL.1S.305.HLN

EPL.1S.306.HLN

Part number

88 www.lemo.com

®®

L

ø A

I

K

N

Ø 1 D

5.08

2.54

3

Note: available only in unipole version.

H

L

I

5.08

7

ø 0.7

ø A

P23 PCB drilling pattern (page 168)

EPL Elbow (90°) socket for printed circuit

6.8 10 7

Dimensions (mm)

A H I

EPL.00.113.NLN

Part number

EPL Elbow (90°) socket for printed circuit

8.8 16 12 9 7.7 22.7 9

Dimensions (mm)

A D H I K L N

EPL.0S.116.DTL

Part number

3.2

L

K

H

M

S 3

ø A

e

E maxi

D

N

I

ø B

M 1.6

ø 0.7

7.62

2.54

Note: to replace the 4 ground pins by 4 screws (M1.6) add an «S» to the end of

the part number. (e.g.: EXP.1S.303.HLNS).

P22 PCB drilling pattern (page 168)

P2 Panel cut-out 0S series (page 158)

P10 Panel cut-out 1S series (page 158)

EXP Elbow (90°) socket for printed circuit with two nuts (solder or screw fixing)

EXP.0S.302.HLN

EXP.0S.303.HLN

EXP.0S.304.HLN

EXP.1S.302.HLN

EXP.1S.303.HLN

EXP.1S.304.HLN

EXP.1S.305.HLN

EXP.1S.306.HLN

Part number

12 12.4 14.6 M9x0.6 6.0 6.7 12.6 13.3 25 2.5 11.7 11

14 15.0 16.6 M11x0.5 7.5 7.5 14.0 13.3 27 3.5 12.6 13

Dimensions (mm)

A B D e E H I K L M N S3

89www.lemo.com

®®

These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The

design, including a latch sleeve and a metal earthing crown, guarantees EMC screening efficiency to meet most requirements.

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

Standard

Value

PEEK POM PSU PPSU

Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force. 2) Steam sterilization

~M

~L

ø A

S 2

M1 Cable assembly (pages 175 and 176)

Mechanical and Climatical

Technical Characteristics

Plastic housing models

Characteristics

natural (beige) black white or grey cream –

> 5000 cycles > 5000 cycles > 5000 cycles > 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C –

- 50° C/+ 250° C - 50° C/+ 115° C - 50° C/+ 150° C - 50° C/+ 180° C –

> 200 cycles none ~20 cycles > 100 cycles IEC 60601-1 § 44.7

very good very good limited good –

Colour

Endurance1)

Humidity

Temperature range

Sterilization resistance2)

Resistance to organic solvents

FFA Straight plug, cable collet, PEEK or POM outer shell

FFP Straight plug, cable collet, PEEK or POM outer shell and inner anti-rotating device

M1 Cable assembly (pages 175 and 176)

7 33.5 25.5 6

12 42.5 31.5 10

15 52.0 40.0 12

18 61.0 46.0 14

Dimensions (mm)

A L M S2

FFA 00

FFP 1S

FFP 2S

FFP 3S

Reference

Model Series

FFP Straight plug, cable collet, PEEK or POM outer shell, inner anti-rotating device

and nut for fitting a bend relief 1)

12 41.5 30.5 10

15 51.0 39.0 12

18 61.0 46.0 14

Dimensions (mm)

A L M S2

FFP 1S

FFP 2S

FFP 3S

Reference

Model Series

S 2

~M

~L

ø A

90 www.lemo.com

®®

L maxi

ø B

e

S 1

S 3

ø A

E maxi

M

Note: 1) unipole model

P1 Panel cut-out (page 158)

ø A

~M

~L

S 2

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

M4 Cable assembly (page 177)

FFL Straight plug, cable collet, with PSU and PPSU outer shell, inner anti-rotating device

and nut for fitting a bend relief 1)

16.5 51.5 39.5 13

Dimensions (mm)

A L M S2

FFL 2S

Reference

Model Series

9 10.2 M7x0.5 5.5 – 14.5 1.0 6.3 9

11 12.4 M9x0.6 6.4 19.3 19.3 1.8 8.2 11

14 15.8 M12x1.0 7.5 22.4 22.4 1.5 10.5 14

18 19.2 M15x1.0 8.5 26.3 26.3 2.0 13.5 17

22 25.0 M18x1.0 11.5 29.8 29.8 2.0 16.5 22

Dimensions (mm)

A B e E L L1) M S1 S3

ERN 00

ERN 0S

ERN 1S

ERN 2S

ERN 3S

Reference

Model Series

ERN Fixed socket, nut fixing, with earthing tag, PEEK or POM outer shell

Note: This model is fitted with a «D or M» type collet system. It is also

adapted for crimp contacts. Available only for multipole.

®®

91www.lemo.com

L maxi

S 3 S 1 M

e

ø B

ø A

E maxi

These socket or coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC

60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory

equipment, aviation, etc.

These models are identified by a letter «P» at the end of the reference.

Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at

the end of the part number (certificate on request).

Epoxy resin is used to seal these models.

Note: 1) unipole model.

Note: vacuumtight version is only available in the 0S series.

L maxi

ø B

E mini/maxi

e

ø A

M

S 3

P11 Panel cut-out (page 158)

P3 Panel cut-out (page 158)

Mechanical and Climatical

Technical Characteristics

Watertight or vacuumtight models

Value Standard

> 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 20° C/ + 100° C

- 20° C/+ 80° C

> 1000h IEC 60512-6 test 11f

20/80/21 IEC 60068-1

< 10-7 mbar.l.s-1 IEC 60512-7 test 14b

Value Standard

60 bar IEC 60512-7 test 14d

40 bar IEC 60512-7 test 14d

30 bar IEC 60512-7 test 14d

15 bar IEC 60512-7 test 14d

5 bar IEC 60512-7 test 14d

Dimensions (mm)

A B e E L L1) M S1 S3

HGP Fixed socket, nut fixing, watertight or vacuumtight

HGP 0S

HGP 1S

HGP 2S

HGP 3S

HGP 4S

HGP 5S

HGP 6S

Reference

Model Series

18 15.8 M12x1.0 11.5 20.5 21.5 4.0 10.5 14

20 19.2 M14x1.0 15.5 25.0 22.0 4.0 12.5 17

20 21.5 M16x1.0 17.0 29.5 28.0 4.0 14.5 19

28 27.0 M20x1.0 18.0 33.0 34.0 6.0 18.5 24

34 34.0 M25x1.0 22.5 39.0 43.0 6.5 23.5 30

45 40.0 M35x1.0 28.0 50.5 78.5 7.5 33.5 –

58 54.0 M48x1.5 22.0 51.0 – 6.0 45.5 –

Dimensions (mm)

A B e L M S3

HGW Fixed socket, nut fixing, with back washer, watertight or vacuumtight

HGW 0S

HGW 1S

Reference

Model Series

10 15 M9x0.6 2 3 20.5 1.2 11

14 18 M12x1.0 2 4 25.0 1.5 14

E

mini E

maxi

Characteristics

Endurance1)

Humidity

Temperature range

Salt spray corrosion test4)

Climatical category

Leakage rate (He)2)

0S-1S

2S-6S

Characteristics

Maximum operating

pressure3)

0S

1S

2S

3S

4S

5S

6S

Note: The 5S and 6S series are delivered with a round nut.

Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.

2) only for vacuumtight models. Residual traces of grease used during (He) leak testing are on the o-ring. Please contact us for further details.

3) this value corresponds to the maximum allowed pressure difference for the assembled socket. 4) for chrome plated product (« C » material code).

92 www.lemo.com

®®

S 4

L maxi

S 3 S 1 M

e

ø B

ø A

E maxi

Note: 1) unipole model

ø A

e

ø B

E maxi

M

S 1

L maxi

P

Note: the 2S and 4S series are delivered with a conical nut.

P3 Panel cut-out (page 158)

Dimensions (mm)

A B e E L L1) M S1 S3 S4

EWB Fixed socket, nut fixing, with two flats on the flange, watertight or vacuumtight

EWB 0S

EWB 1S

EWB 2S

EWB 4S

Reference

Model Series

18 15.8 M12x1.0 11.0 20.5 – 4.0 10.5 14 14

20 19.2 M14x1.0 15.5 25.5 25.5 4.0 12.5 17 16

20 21.5 M16x1.0 17.0 28.0 26.5 4.0 14.5 19 16

34 34.0 M25x1.0 22.5 43.0 – 6.5 23.5 30 27

Dimensions (mm)

A B e E L M P S1

HCP Fixed socket, nut fixing, watertight or vacuumtight (back panel mounting)

HCP 1S

HCP 2S

HCP 4S

Reference

Model Series

18 20 M14x1.0 8.6 25.5 3.5 12.0 –

20 20 M16x1.0 12.5 29.0 3.5 16.5 14.5

27 34 M25x1.0 15.5 41.0 4.5 20.0 23.5

E maxi S 1

ø A

M

ø B

e

L

S 3

Note: The 5S and 6S series are delivered with a round nut.

P4 Panel cut-out (page 158)

14 13.8 M10x0.75 17 34 2.0 9.0 12

17 15.8 M12x1.00 28 39 2.5 10.5 14

20 21.5 M16x1.00 25 44 4.0 15.0 19

25 27.0 M20x1.00 30 53 4.0 18.5 24

34 34.0 M25x1.00 50 65 4.0 23.5 30

45 40.0 M35x1.00 58 80 5.0 33.5 –

58 54.0 M48x1.50 55 81 6.0 45.5 –

Dimensions (mm)

A B e E L M S1 S3

SWH Fixed coupler, nut fixing, watertight or vacuumtight

SWH 0S

SWH 1S

SWH 2S

SWH 3S

SWH 4S

SWH 5S

SWH 6S

Reference

Model Series

Note: see page 114 for the available plug and contact configurations and

in order to ensure correct contact alignment.

93www.lemo.com

®®

E series connectors have been specifically designed for outdoor applications.

They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,

free socket, fixed socket or coupler. All models of these series are watertight when mated and give a protection index of

IP 68 as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP 66 otherwise).

– security of the Push-Pull latching system – watertight connection (IP 68/IP 66)

– unipole types transmitting current up to 230 A – polarization by stepped insert (half-moon)

and multipole types with up to 106 contacts fitted with male and female contacts

– wide range of models satisfying most applications – solder or print contacts (straight or elbow)

– 360° screening for full EMC shielding – rugged housing for extreme working condition.

FFA, FFP*

FFA

FZP*

FFF

FAA

HGP

ERA PCA, PCP*

PCA

PSA

PCA

SWH

ERC

EHP*

ERB*

EBR

RMA

EEP

FLA

FLM

Watertight or vacuumtight models (page 101)

Fixed sockets

Straight plug

Fixed plug

Elbow plug

Straight plugs Fixed sockets Free sockets

Fixed socket

Free coupler

Fixed coupler

E Series

Metal housing models (page 95)

Note: * Contact LEMO for details.

94 www.lemo.com

®®

Part Section Showing Internal Components

4

5

3

6

8

7

1

2

6

7

1

2

5

4

3

8

9

10

11

12

13

57

418832 63 7 6 1 410 12 13

9 8 25

11

Fixed socket

outer shell

earthing crown

retaining ring

hexagonal nut

insulator

male contact

female contact

o-ring

Straight plug

outer shell

latch sleeve

inner shell

retaining ring

collet nut

centre-piece

insulator

male contact

female contact

earthing cone

collet

gasket

washer

FFA.1E.304.CLAC35 = straight plug with cable collet, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass,

PEEK insulator, 2 male and 2 female solder contacts, C type collet for a 3.5 mm diameter cable.

ERA.1E.304.CLL = fixed socket, nut fixing, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK insulator,

2 female and 2 male solder contacts.

RMA.1E.304.CLL = straight coupler, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK insulator, 2

female and 2 male contacts each end.

PCA.1E.304.CLLC35Z = free socket with cable collet, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass,

PEEK insulator, 2 female and 2 male solder contacts, C type collet for a 3.5 mm diameter cable and collet nut for fitting a bend relief.

Fixed socket

Part Numbering System

Plug

F F A 1E

Cable ø: (page 119)

Collet type: (page 119)

Variant: (page 121)

3 0 4

Insert configuration: (p. 103)

Model: (page 95)

Series: (page 95)

C L A C 3 5

Contact: (page 112)

Insulator: (page 112)

Housing: (page 112)

Variant: (page 121)

...

Free socket Z

P C A 1E 3 0 4 C L L C 3 5

.. .

E R A 1E 3 0 4 C L L

.. .

Coupler

R M A 1E 3 0 4 C L L

.. .

®®

95www.lemo.com

~M

~L

ø A

S 2

~M

~L

ø A

S 1

ø B

Note: 1) with key (G)

M2 Cable assembly (pages 179 and 181)

Metal housing models

Technical Characteristics

Electrical

Note: the various tests have been carried out with FFA and ERA connector

pairs, with chrome-plated brass shell, PEEK insulator and silicone O-ring.

Detailed electrical characteristics, as well as materials and treatment are

presented in the chapter Technical Characteristics on page 182.

1) see page 189, contact resistance after mating cycles. See page 185,

mechanical endurance latching force.

2) minimum operating temperature is -20°C for sockets fitted with an FPM

(Viton®) O-ring.

3) IP68 achieved providing that the cable is perfectly circular and that

assembly process ensures a high integrity seal.

4) for chrome plated product (« C » material code).

Mechanical and Climatical

Note: 1) correspond to K type of collet, the fitting of oversize collets onto

this model allows them to be fitted to the cables that can be accommodated

by the next housing size up (see page 119).

M1 Cable assembly (pages 179 to 181)

Characteristics Value Standard

> 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 55° C, + 200° C

10-2000 Hz, 15g IEC 60512-4 test 6d

100 g, 6 ms IEC 60512-4 test 6c

> 1000h IEC 60512-6 test 11f

IP 68/IP 66 IEC 60529

50/175/21 IEC 60068-1

Endurance1)

Humidity

Temperature range2)

Resistance to vibrations

Shock resistance

Salt spray corrosion test4)

Protection index (mated)3)

Climatical category

Value Standard

> 95 dB IEC 60169-1-3

> 80 dB IEC 60169-1-3

11 34 23.0 8

13 42 28.0 9

16 52 36.0 12

19 61 41.0 15

25 71 50.5 19

38 92 67.0 32

47 118 89.0 38

Dimensions (mm)

A L M S2

FFA 0E

FFA 1E

FFA 2E

FFA 3E

FFA 4E

FFA 5E

FGG1) 6E

Reference

Model Series

FFA Straight plug, cable collet

13 14.5 55 41 12 12

16 17.0 65 49 15 15

19 22.0 80 60 19 19

25 36.0 118 84 30 32

Dimensions (mm)

A B L M S1 S2

FFA 1E

FFA 2E

FFA 3E

FFA 4E

Reference

Model Series

FFA Straight plug with oversize cable collet 1)

Characteristics

Shielding

efficiency

at 10 MHz

at 1 GHz

ø A

S 3 M

L maxi

S 1

E maxi

e

ø B

96 www.lemo.com

®®

~M

~L

ø A

S 2

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

~M

~L

ø A

S 2

M1 Cable assembly (pages 179 and 180)

11 34 23.0 7

13 42 28.0 9

16 52 36.0 12

19 60 40.0 15

25 71 50.5 19

Dimensions (mm)

A L M S2

FFA 0E

FFA 1E

FFA 2E

FFA 3E

FFA 4E

Reference

Model Series

FFA Straight plug, cable collet and nut for fitting a bend relief 1)

M1 Cable assembly (pages 179 and 180)

11 34 23 8

13 42 28 9

Dimensions (mm)

A L M S2

FFF 0E

FFF 1E

Reference

Model Series

FFF Straight plug non-latching cable collet

Note: 1) unipole model

P1 Panel cut-out (page 159)

18 19.2 M14x1.0 3.5 19.5 19.5 13.0 12.5 17

20 21.5 M16x1.0 3.5 23.0 23.0 16.0 14.5 19

25 27.0 M20x1.0 4.0 27.0 27.0 18.0 18.5 24

31 34.0 M24x1.0 4.5 32.5 32.5 22.5 22.5 30

Dimensions (mm)

A B e E L L1) M S1 S3

FAA 0E

FAA 1E

FAA 2E

FAA 3E

Reference

Model Series

FAA Fixed plug non-latching, nut fixing

~M

~L

ø A

~H

S 1

S 2

S 3

D

M3 Cable assembly (pages 179 and 180)

FLM Elbow (90°) plug, cable collet

11 7.3 25 36 25 9 8 8

13 8.7 33 42 28 11 9 10

16 10.2 40 51 35 14 12 13

Dimensions (mm)

A D H L M S1 S2 S3

FLM 0E

FLM 1E

FLM 2E

Reference

Model Series

97www.lemo.com

®®

ø A

e

ø B

S 3 M

S 1

E maxi

L maxi

ø A

e

F

ø B

S 3 M

S 1

E maxi

L maxi

Note: 1)unipole model.

2) with key (G).

~M

~L

ø A

H

S 1

S 2

S 3

D

M3 Cable assembly (pages 179 and 180)

FLA Elbow (90°) plug, cable collet

21.0 11.5 47 60 40.0 18 15 15

27.5 15.5 57 72 51.5 24 19 20

Dimensions (mm)

A D H L M S1 S2 S3

FLA 3E

FLA 4E

Reference

Model Series

P1 Panel cut-out (page 159)

18 19.2 M14x1.0 5.5 19.5 20.5 4.0 12.5 17

20 21.5 M16x1.0 9.0 24.0 25.3 4.5 14.5 19

25 27.0 M20x1.0 9.0 28.5 30.0 5.0 18.5 24

31 34.0 M24x1.0 11.0 34.0 35.0 6.0 22.5 30

37 40.5 M30x1.0 9.0 36.0 38.0 6.5 28.5 36

55 54.0 M45x1.5 10.0 44.5 78.0 9.0 42.5 –

65 65.0 M55x2.0 10.5 48.5 – 10.0 52.0 –

Dimensions (mm)

A B e E L L1) M S1 S3

ERA Fixed socket, nut fixing

ERA 0E

ERA 1E

ERA 2E

ERA 3E

ERA 4E

ERA 5E

EGG2) 6E

Reference

Model Series

Note: 1) unipole model.

P1 Panel cut-out (page 159)

18 19.2 M14x1.0 5.5 1.5 19.5 20.5 4.0 12.5 17

31 34.0 M24x1.0 11.0 3.0 34.0 35.0 6.0 22.5 30

37 40.5 M30x1.0 9.0 3.0 36.0 38.0 6.5 28.5 36

Dimensions (mm)

A B e E F L L1) M S1 S3

ERC Fixed socket, nut fixing with slot in the flange

ERC 0E

ERC 3E

ERC 4E

Reference

Model Series

Note: The 5E and 6E series are delivered with a round nut.

ø A

e

ø B

P

E maxi

M

S 1

N

2

20 mini

L

Note: this contact type is available for all back panel mounting socket

types. See page 168 for available types.

Length «L» depends on the number of contacts, see PCB drilling pattern

on page 168.

ø A

e

ø B

P

E maxi

M

S 1

N

L

Note: The 3E series is delivered with a conical nut.

98 www.lemo.com

®®

ø A

e

ø B

P

L maxi

E maxi

M

S 1

Note: the 3E series is delivered with a conical nut.

Note: 1)unipole model

P21 PCB drilling pattern (page 166)

P1 Panel cut-out (page 159)

P24 PCB drilling pattern (page 168)

P1 Panel cut-out (page 159)

18 18 M14x1.0 3.5 19.5 20.5 3.5 7 12.5

20 20 M16x1.0 6.5 24.0 25.3 3.5 10 14.5

25 25 M20x1.0 6.5 28.5 30.0 3.5 10 18.5

30 31 M24x1.0 7.5 34.0 35.0 4.5 12 22.5

Dimensions (mm)

A B e E L L1) M P S1

EEP Fixed socket, nut fixing (back panel mounting)

EEP 0E

EEP 1E

EEP 2E

EEP 3E

Reference

Model Series

18 18 M14x1.0 3.5 3.5 16.0 7 12.5

20 20 M16x1.0 6.5 3.5 21.5 10 14.5

25 25 M20x1.0 6.5 3.5 24.0 10 18.5

30 31 M24x1.0 7.5 4.5 29.5 12 22.5

Dimensions (mm)

A B e E M N P S1

EEP Fixed socket, nut fixing, with straight contact for printed circuit (back panel mounting)

EEP 0E

EEP 1E

EEP 2E

EEP 3E

Reference

Model Series

20 20 M16x1.0 6.5 3.5 21.5 10 14.5

25 25 M20x1.0 6.5 3.5 24.0 10 18.5

Dimensions (mm)

A B e E M N P S1

EEP Fixed socket, nut fixing, with elbow (90°) contacts for printed circuit (back panel mounting)

EEP 1E

EEP 2E

Reference

Model Series

Note: this contact type is available for all Ell socket models.

See page 167 for table of available types.

Length «L» depends on the number of contacts, see PCB drilling pattern

on page 167.

99www.lemo.com

®®

~L

S 2 S 1

ø B

ø A

S 2

ø A

~L

ø A

S 2

Note: 1) correspond to K type of collet, the fitting of oversize collets onto

this model allows them to be fitted to the cables that can be accommodated

by the next housing size up (see page 119).

M2 Cable assembly (page 181)

PCA Free socket, cable collet

15 14.5 58.0 12 12

19 17.0 67.0 15 15

23 22.0 84.0 19 19

29 36.0 109.0 30 32

Dimensions (mm)

A B L S1 S2

PCA 1E

PCA 2E

PCA 3E

PCA 4E

Reference

Model Series

PCA Free socket with oversize cable collet 1)

Note: 1) to order, add a «Z» at the end of the reference.

The bend relief must be ordered separately (see page 145).

M1 Cable assembly (pages 179 and 180)

13 34.0 7

15 45.0 9

19 54.0 12

23 64.0 15

29 75.5 19

Dimensions (mm)

A L S2

PCA 0E

PCA 1E

PCA 2E

PCA 3E

PCA 4E

Reference

Model Series

PCA Free socket, cable collet and nut for fitting a bend relief 1)

Note: 1)with key (G)

M1 Cable assembly (pages 179 to 181)

13 34.0 8

15 45.0 9

19 54.0 12

23 65.0 15

29 75.5 19

42 95.0 32

52 125.0 38

Dimensions (mm)

A L S2

PCA 0E

PCA 1E

PCA 2E

PCA 3E

PCA 4E

PCA 5E

PHG1) 6E

Reference

Model Series

L maxi

ø A

Note: see page 114 for the available plug and contact configurations and

in order to ensure correct contact alignment.

100 www.lemo.com

®®

ø A

e

ø B

S 3 M

E maxi

S 2

L maxi

S 1

Note: The 5E and 6E series are delivered with a round nut.

P1 Panel cut-out (page 159)

M1 Cable assembly (pages 179 to 181)

Dimensions (mm)

A B e E L M S1 S2 S3

PSA Fixed socket, nut fixing, cable collet

PSA 0E

PSA 1E

PSA 2E

PSA 3E

PSA 4E

PSA 5E

PKG1) 6E

Reference

Model Series

18 19.2 M14x1.0 5.5 34.0 4.0 12.5 8 17

20 21.5 M16x1.0 9.0 45.0 4.5 14.5 9 19

25 27.0 M20x1.0 9.0 54.0 5.0 18.5 12 24

31 34.0 M24x1.0 11.0 65.0 6.0 22.5 15 30

37 40.5 M30x1.0 9.0 75.5 6.5 28.5 19 36

51 54.0 M45x1.5 10.0 95.0 9.0 – 32 54

65 65.0 M55x2.0 10.5 125.0 10.0 – 38 –

RMA Free coupler

14 30

16 40

20 44

25 54

30 57

44 67

Dim. (mm)

A L

RMA 0E

RMA 1E

RMA 2E

RMA 3E

RMA 4E

RMA 5E

Reference

Model Series

Note: 1) with key (G).

®®

101www.lemo.com

ø A

e

ø B

S 1

S 3 M

E maxi

L maxi

These socket or coupler models allow the device on which they are fitted to reach a protection index of IP 68 as per IEC 60529.

They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment,

aviation, etc.

These models are identified by a letter «P» at the end of the reference.

Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the

end of the part number (certificate on request).

Epoxy resin is used to seal these models.

Mechanical and Climatical

Technical Characteristics

Note: 1) unipole model.

2) with key (G).

P1 Panel cut-out (page 159)

Watertight or vacuumtight models

Value Standard

> 5000 cycles IEC 60512-5 test 9a

up to 95% at 60° C

- 20° C, + 100° C

- 20° C, + 80° C

> 1000h IEC 60512-6 test 11f

20/80/21 IEC 60068-1

< 10-7 mbar.l.s-1 IEC 60512-7 test 14b

Value Standard

60 bar IEC 60512-7 test 14d

40 bar IEC 60512-7 test 14d

30 bar IEC 60512-7 test 14d

15 bar IEC 60512-7 test 14d

5 bar IEC 60512-7 test 14d

Dimensions (mm)

A B e E L L1) M S1 S3

HGP Fixed socket, nut fixing, watertight or vacuumtight

HGP 0E

HGP 1E

HGP 2E

HGP 3E

HGP 4E

HGP 5E

HGP2) 6E

Reference

Model Series

18 19.2 M14x1.0 5.5 23.5 22.0 4.0 12.5 17

20 21.5 M16x1.0 9.0 29.5 28.0 4.5 14.5 19

25 27.0 M20x1.0 10.5 32.5 28.0 5.0 18.5 24

31 34.0 M24x1.0 15.5 39.5 38.5 6.0 22.5 30

37 40.5 M30x1.0 17.5 43.0 44.0 6.5 28.5 36

55 54.0 M45x1.5 20.0 52.0 76.0 9.0 42.5 –

65 65.0 M55x2.0 20.5 52.0 – 10.0 52.0 –

Characteristics

Endurance1)

Humidity

Temperature range

Salt spray corrosion test 4)

Climatical category

Leakage rate (He)2)

0E-1E

2E-6E

Characteristics

Maximum operating

pressure3)

0E

1E

2E

3E

4E

5E

6E

Note: The 5E and 6E series are delivered with a round nut.

Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.

2) only for vacuumtight models. Residual traces of grease used during (He) leak testing are on the o-ring. Please contact us for further details.

3) this value corresponds to the maximum allowed pressure difference for the assembled socket. 4) for chrome plated product (« C » material code).

E maxi

S 3

ø A

S 1

M

ø B

e

L

Note: 1) with key (G).

102 www.lemo.com

®®

ø B

~M

ø C

~L

N

H 1

H 2

ø A

Note: 1) unipole model.

P6 Panel cut-out (page 159)

P1 Panel cut-out (page 159)

EBR Fixed socket with round flange, watertight, protruding shell and screw fixing

28 15 2.8 11.8 20.4 32.5 28 19 25

Dimensions (mm)

A B C H1 H2 L L1) M N

EBR 2E

Reference

Model Series

18 19.2 M14x1.0 22.5 36.0 4.0 12.5 17

20 21.5 M16x1.0 30.5 47.0 4.5 14.5 19

25 27.0 M20x1.0 28.0 52.4 5.0 18.5 24

31 34.0 M24x1.0 33.0 64.2 6.0 22.5 30

37 40.5 M30x1.0 44.5 70.0 6.5 28.5 36

55 54.0 M45x1.5 47.0 81.0 9.0 42.5 –

65 65.0 M55x2.0 12.0 76.0 10.0 – –

Dimensions (mm)

A B e E L M S1 S3

SWH Fixed coupler, nut fixing, watertight or vacuumtight

SWH 0E

SWH 1E

SWH 2E

SWH 3E

SWH 4E

SWH 5E

SWH1) 6E

Reference

Model Series

Note: This model is only available in a watertight version.

Note: The 5E and 6E series are delivered with a round nut.

Note: See page 114 for the available plug and contact configurations

and in order to ensure correct contact alignment.

1.3 l2) l – – 20 26 18

103www.lemo.com

®®

Insert configuration (S and E series)

Solder contacts

116

120

130

140

160

0.8 1.2 8 00 –

113

1.6 l2) – – – 18 – – 1.5 2.1 12 0S 0E

2.0 l2) – – – 16 – – 1.9 2.7 18 1S 1E

3.0 l – – – 12 – –

1.5 2.1 25

2.1 3.0 30

1S 1E

2S 2E

4.0 l – – – 10 – –

1.7 2.4 40

2.3 3.3 43

3.0 4.2 46

2S 2E

3S 3E

4S –

6.0 l – – – 8 – –

1.7 2.4 65

2.7 3.9 70

3S 3E

4S 4E

12.0 l – – – 0 – – 1.5 2.1 230 5S 5E

112

Unipole

Reference

Number of LV contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

AWG

Crimp

Test voltage (kV rms)1)

Test voltage (kV dc)1)

Rated current (A)1)

Standard

Watertight

Series

1

Contact

type

Note: 1) see calculation method, caution and suggested standard on page 190. 2) also available with inversed contacts: plug = female, socket = male.

lFirst choice alternative lSpecial order alternative

®®

104 www.lemo.com

2

1

2

1

302

1

3

2

3

1

12

43

21

34

5

2

1

3

4

2

3

1

5

2

3

4

5

Multipole

Reference

Number of LV contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

AWG

Crimp

Test voltage (kV rms)1) 2)

Test voltage (kV dc)1) 2)

Rated current (A)1)

Standard

Watertight

Series Contact

type

Solder contacts

Crimp contacts

0.9 l l l l 22 32 20

1.3 l l l l 20 26 18

1.6 l l l l 18 22 14

2.0 l –l– 16 – –

4.0 l –l– 10 – –

6.0 l ––– 8 – –

1.1 1.6 103)

1.2 1.8 153)

1.7 2.4 204)

3.0 4.2 23

2.1 3.0 35

3.7 5.2 50

0S 0E

1S 1E

2S 2E

3S 3E

4S 4E

5S 5E

303

0.7 l l l l 26 32 22

0.9 l l l l 22 32 20

1.3 l l l l 20 26 18

2.0 l –l– 16 – –

3.0 l –l– 12 – –

l – – – – –

1x6.0  8

2x4.0  10

1.0 1.5 73)

1.2 1.8 103)

1.5 2.1 154)

1.5 2.1 20

2.1 3.0 25

3.7 5.2

0S 0E

1S 1E

2S 2E

3S 3E

4S 4E

5S 5E 50

35

1

3 2

1

2 3 6.0 l ––– 8 – – 3.0 4.2 50 – 6E

303

304

0.7 l l l l 26 32 22

0.9 l l l l 22 32 20

1.3 l l l l 20 26 18

2.0 l –l– 16 – –

3.0 l –l– 12 – –

4.0 l ––– 10 – –

8.0 l ––– 4 – –

1.0 1.5 73)

1.2 1.8 103)

1.7 2.4 154)

1.5 2.1 18

2.1 3.0 22

3.7 5.2 35

3.0 4.2 60

0S 0E

1S 1E

2S 2E

3S 3E

4S 4E

5S 5E

6S 6E

305

l l l l 32

1.3 l l l l 20 26 18

l –l– – –

l ––– – –

1.5 2.1

1.5 2.1 134)

1.5 2.1

2.1 3.0

3.0 4.2

1S 1E

2S 2E

3S 3E

4S 4E

5S 5E

103)

73)

18

14

22

16

2x4.0  10

3x3.0 12

2x2.0  16

3x1.3 20

2x3.0  12

3x2.0 16

2x0.9  22 20

3x0.7 26 22

35

25

Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.

3) rated current = 6A for socket with elbow (90°) contacts for printed circuit. 4) rated current = 12A for socket with elbow (90°) contacts for printed circuit.

lFirst choice alternative Special order alternative

®®

105www.lemo.com

65

4

2

1

3

4

56

2

3

1

6

306

0.7 l l l l 26 32 22

1.3 l l4) l l 20 26 18

1.3 l – l – 20 – –

2.0 l –l– 16 – –

3.0 l ––– 12 – –

1.2 1.7 73)

1.5 2.1 12

2.1 3.0 14

2.1 3.0 16

3.0 4.2 25

1S 1E

2S 2E

3S 3E

4S 4E

5S 5E

307

l l l l

1.3 l – l – 20 – –

l –l– – –

0.8 1.2

1.0 1.5 12

2.1 3.0

2S 2E

3S 3E

4S 4E

3x1.3  20 26 18

4x0.9  22 32 20 123)

93)

3x2.0  16

4x1.3  20 16

13

1

3

24

76

5

42

3

1

5

67

7

1

3

2

4

8

76

5

4

2

3

1

5

67

8

308

0.9 l l l l 22 32 20

1.3 l –l l 20 – –

1.3 l –l– 20 – –

3.0 l ––– 12 – –

0.8 1.2 93)

1.0 1.5 10

2.7 3.9 13

2.1 3.0 22

2S 2E

3S 3E

4S 4E

5S 5E

1.3 l –l– 20 – – 2.1 3.0 12 4S 4E

309

9

8

6

7

1

4

25

3

6

79

8

52

4

1

3

9

10

1 9

3

6

2

7

4

5

10

8

4

9

2

7

3

6

1

8

105310

0.9 l l l l 22 32 20

1.3 l – l l 20 – –

0.8 1.2 73)

1.0 1.5 9

2S 2E

3S 3E

310

1.3 l –l– 20 – –

2.0 l ––– 16 – –

2.1 3.0 11

2.1 3.0 18

4S 4E

5S 5E

10

1

4

2

7

9

5

10

8

3

6

52

4

9

7

1

6

8

3

10

Multipole

Reference

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

AWG

Crimp

Test voltage (kV rms)1) 2)

Test voltage (kV dc)1) 2)

Rated current (A)1)

Standard

Watertight

Series Contact

type

Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.

3) rated current = 6A for socket with elbow (90°) contacts for printed circuit. 4) only for FFL model.

lFirst choice alternative Special order alternative

Number of LV contacts

Solder contacts

Crimp contacts

106 www.lemo.com

®®

12

3

2

12

1

11

6

10

7

6

1

11

2

12

3

7

10

0.9 l – l l 22 – – 1.5 2.1 8 3S 3E

312

1

4

2

7

9

5

11

10

12

8

3

6

52

4

9

7

1

11

612

8

3

10

6

1

12

5

2

11

4

3

10

9

8

7

1

6

7

2

5

8

3

4

910

11

12

4

3

13

1

12

7

11

8

7

1

12

3

13

4

8

11

6

8

9

12

13

7

1

4

25

3

1110

9

7

6

1312

8

52

4

1

3

1011

12

13

312

1.3 l – l – 20 – –

4.0 l – – – 10 – –

5.0 l – – – 8 – –

2.1 3.0 9

2.1 3.0 22

4S 4E

6S –

– 6E

2.0 l – – – 16 – – 2.1 3.0 18 5S 5E

312

0.9 l – l l 22 – – 1.5 2.1 8 3S 3E

313

1.3 l – l – 20 – – 2.1 3.0 9 4S –

313

0.9 l – l l 22 – – 1.5 2.1 7 3S 3E

314

4

3

14

1

12

7

11

8

7

1

12

3

14

4

8

11

1

4

2

7

9

5

12

13

11

14

10

8

3

6

52

4

9

7

1

11

14

12

13

6

8

3

10

14

1.3 l – l – 20 – – 2.1 3.0 9 4S 4E

314

Multipole

Reference

Number of LV contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

AWG

Crimp

Test voltage (kV rms)1) 2)

Test voltage (kV dc)1) 2)

Rated current (A)1)

Standard

Watertight

Series Contact

type

Solder contacts

Crimp contacts

Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.

lFirst choice alternative lSpecial order alternative

107www.lemo.com

®®

l – – – – – 1.8 2.4 5S 5E

314

6

1

12

5

2

11

4

3

10 9

8

7

13

14

1

6

7

2

5

8

3

4

9

10

11

12

13

14

41

8

5

129

1613

14

58

912

1316

6

1

12

5

2

11

4

3

109

8

7

14

13

15

16

1

6

7

2

5

8

3

4

9

10

11

12

13

14

16

15

14

16

2x3.0 12

12x2.0 16 20

15

316 0.9 l – l l 22 – –

0.9 l – l – 22 – –

1.0 1.5 7

2.1 3.0 7

3S 3E

4S 4E

2.0 l – – – 16 – – 1.8 2.4 15 5S 5E

316

5

4

3

2

1

8

7

6

12

11

10

9

16

15 14

13

1

2

3

4

5

6

7

8

9

10

11

12

13

14 15

16

3.0 l – – – 12 – – 1.5 2.1 14 – 6E

316

18

1410

1815

41

9

5

1014

1518

14

5

9

8

17

3

2

7

46

16

15

14 12

11

9

10

18

13

5

1

17

6

7

2

5

3

9

10

11

13 14

16

15

18

12

4

8

318 0.9 l – l l 22 – –

0.9 l – l – 22 – –

1.0 1.5 6

2.1 3.0 7

3S 3E

4S 4E

l – – – – – 1.8 2.4 5S 5E

318 2x3.0 12

16x1.6 18 18

11

9

21

5

6

3

13

10

1614

1817

6

12

3

9

5

10

13

1416

1718

18

4.0 l – – – 10 – – 1.2 1.8 16 6S –

318

Multipole

Reference

Number of LV contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

AWG

Crimp

Test voltage (kV rms)1) 2)

Test voltage (kV dc)1) 2)

Rated current (A)1)

Standard

Watertight

Series Contact

type

Solder contacts

Crimp contacts

Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.

lFirst choice alternative lSpecial order alternative

108 www.lemo.com

®®

6

3

1

2018

10

45

11 15

16 17

10

1

3

1820

6

54

1511

17 16

8

18

17

19

20

3

2

7

46

16

15

14 12

11

9

10

13

5

1

17

18

20

19

6

7

2

5

3

9

10

11

1314

16

15

12

4

8

10

1

5

2

6

15

11

19

16

20

6

1

2

5

10

11

15

16

19

20

63

17

7

20

12

21

16

21

11

22

36

20

11

17

16

1

2

12

22

7

21

8

31

2422

12

4 7

13 17

18 21

12

13

2224

8

7 4

17 13

21 18

8

19

18

22

21

20

17

3

2

7

46

16

15

14 12

11

9

10

13

5

1

17

18

20

21

22

19

6

7

2

5

3

9

10

11

13 14

16

15

12

4

8

20

22

24

0.9 l – l – 22 – – 2.1 3.0 7 4S 4E

320

20

1.6 l – – – 18 – – 1.8 2.4 11 5S 5E

320

3.0 l – – – 12 – – 1.5 2.1 14 6S –

320

2

1

14

13

7

6

5

4

3

1211

10

9

8

17

16

15

20 19

18

6

7

8

9

1

2

3

4

5

10

11 12

13

14

15

16

17

18

19 20

20

3.0 l – – – 12 – – 1.5 2.1 14 – 6E

320

22

0.9 l – l – 22 – – 2.1 3.0 7 4S 4E

322

l – – – – – 1.8 2.4 5S 5E

322 2x3.0 12

20x1.6 18 16

9

324

0.9 l – l – 22 – –

1.6 l – – – 18 – –

3.0 l – – – 12 – –

2.1 3.0 7

2.7 3.9 9

1.2 1.8 12

4S 4E

5S 5E

6S –

Multipole

Reference

Number of LV contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

AWG

Crimp

Test voltage (kV rms)1) 2)

Test voltage (kV dc)1) 2)

Rated current (A)1)

Standard

Watertight

Series Contact

type

Solder contacts

Crimp contacts

Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.

lFirst choice alternative lSpecial order alternative

109www.lemo.com

®®

16

2823

3029

12

8

15 9

22

3

22

2328

2930

21

3

9 15

16

8

4

9

5

1

15

10

21

16

2622

3027

1

5

9

4

10

15

16

21

2226

2730

30

9

8

6

5

4

3

2

1

16

15

14

13 12

11

10

21

20

19

18

17

24

2322

7

1

2

4

5

6

7

8

9

10

11

12 13

14

15

16

17

18

19

20

21

2223

24

3

24

3.0 l – – – 12 – – 1.2 1.8 12 – 6E

324

1.3 l – – – 20 – – 1.8 2.4 8 5S 5E

330

2.0 l – – – 16 – – 2.1 3.0 10 6S 6E

330

4

8

5

16

1

9

2417

28

3229

25

1

5

8

9

4

16

1724

25

2932

28

32

2.0 l – – – 16 – – 1.5 2.1 10 – 6E

332

1.3 l – – – 20 – – 1.8 2.4 7 5S 5E

336

19 25

31

32

26

36

1 5

611

1218

25 19

26

36

31

32

5 1

116

1812

36

2.0 l – – – 16 – – 1.5 2.1 8 6S –

336

l – – – – – 1.5 2.1 – 6E

336

31

128

18

2419

29

3330

3634

25

13

74

13

812

13

1924

25

3033

3436

29

18

47

36

51

11

6

2012

30

21

34

33 32

31

35 36

15

6

11

1220

21

30

31

32 33

34

3536

36

30x1.3 20

6x5.0 8 4

22

Multipole

Reference

Number of LV contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

AWG

Crimp

Test voltage (kV rms)1) 2)

Test voltage (kV dc)1) 2)

Rated current (A)1)

Standard

Watertight

Series Contact

type

Solder contacts

Crimp contacts

Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.

lFirst choice alternative lSpecial order alternative

110 www.lemo.com

®®

21 28

29 34

3540

16

712

20

13

28 21

3429

4035

61

127

13

20

40

3731

4338 44

1

72

14

8

2215

3023

3137

3843 44

1

2

7

8

14

1522

2330

340

44

1.3 l – – – 20 – – 1.2 1.8 6 5S 5E

344

348

1.6 l – – – 18 – – 1.5 2.1 5 6S 6E

360

Multipole

Reference

Number of LV contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

AWG

Crimp

Test voltage (kV rms)1) 2)

Test voltage (kV dc)1) 2)

Rated current (A)1)

Standard

Watertight

Series Contact

type

Solder contacts

Crimp contacts

25 32

33 39

40 45

46 48

49

1 3

10 16

24

17

32 25

3933

45 40

48 46

94

31

16 10

17

24

1

7

14

22

31

40

48

55 60

54

47

39

30

21

13

6

13

21

30

39

47

54

60 55

48

40

31

22

14

7

1

48

60

1.6 l – – – 18 – – 1.5 2.1 5 6E

362

15

1

62

72

6156

148

5549

22

41 48

3123

4032

22

1

62

27

5661

814

4955

15

48 41

2331

3240

62

1.3 l – – – 20 – – 1.2 1.8 4 6S 6E

364

1 5

13

6

22

32

4233

5143

14

23

59

6460

52

5 1

6

13

14

23

3342

4351

22

32

52

6064

59

64

1.3 l – – – 20 – – 1.2 1.8 4 6S 6E

372

21

3

10 17

26

3627

37 46

55

63

70

7271

64

56

47

18

9

12

9

17 10

18

2736

46 37

47

56

64

7172

70

63

55

26

3

72

1.3 l – – – 20 – –

2.0 l – – – 16 – –

1.2 1.8 7

1.5 2.1 8

5S 5E

– 6E

1.3 l – – – 20 – –

2.0 l – – – 16 – –

1.2 1.8 6

1.5 2.1 7

5S 5E

6S 6E

Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.

lFirst choice alternative lSpecial order alternative

111www.lemo.com

®®

19

17

26

3627

37 47

5948

60 70

8071

81 89

97

10498

106105

90

18

10

32

2

3

10

18

2736

47 37

4859

70 60

7180

8981

90

98104

105106

97

26

17

9

1

106

106 0.9 l – – – 22 – – 0.8 1.2 2 – 6E

13

114

12 20

3021

31 41

53

42

54 65

7666

7786

95

87

103

106104

96

31

4

11

20 12

2130

41 31

42

53

65 54

6676

8677

87

95

96

104106

103

106

106 0.9 l – – – 22 – – 0.8 1.2 2 6S –

Multipole

Reference

Number of LV contacts

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

AWG

Crimp

Test voltage (kV rms)1) 2)

Test voltage (kV dc)1) 2)

Rated current (A)1)

Standard

Watertight

Series Contact

type

Solder contacts

Crimp contacts

Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.

lFirst choice alternative lSpecial order alternative

112 www.lemo.com

®®

Note: detailed characteristics of these materials and treatments are presented on page 182.

1) see «variant» for the colour.

2)in the E series, the latch sleeve is chrome-plated.

3) surface not conductive use socket with earthing tag (ERN model) to carry shield.

Note: detailed characteristics of these materials are presented on page 187.

lFirst choice alternative lSpecial order alternative

Crimping characteristics

– practical, quick contact fixing outside the insulator

– possible use at high temperature

– need to order specific tools

– no risk of heating the insulator during the conductor-

contact fixing

– high tensile strength

– totally lead-free solution

Soldering characteristics

– no need to order specific tools, a simple soldering iron

is sufficient

– ideal for very small and fragile conductors

– contacts with solder cups to allow the solder to flow

Note: see page 188 for more information.

C

D

N

K

S

T

U

L

B

G

P

R

H

Outer shell and collet nut Latch sleeve + earthing crown Other metallic components

Material Surf. treatment Material Surf. treatment Material Surf. treatment Remarks Note

Housings (S and E series)

Contacts (S and E series)

Insulators (S and E series)

L

Y

T

V

N

Ref. Material Contact type Remarks Note

PEEK Solder or print l

PEEK Crimp l

PTFE Solder only for unipole types l

FEP Solder only for multipole types of the S or E series l

PI Solder only for multipole types of the S or E series l

PA6.6 Solder material for 5S/5E and 6S/6E series multipole inserts l

Ref.

lFirst choice alternative

lSpecial order alternative

Brass chrome brass/bronze nickel 2) brass nickel l

Brass gold-plated brass/bronze nickel 2) brass nickel l

Brass nickel brass/bronze nickel 2) brass nickel l

Brass black chrome 3) brass/bronze nickel 2) brass nickel l

Stainless steel – brass/bronze nickel 2) brass nickel l

Stainless steel – stainless steel – brass nickel l

Stainless steel – stainless steel – stainless steel – l

Aluminium alloy anodized brass/bronze nickel 2) brass nickel 1) l

POM (black) – brass/bronze nickel 2) brass nickel Only for FFP, ERN and PCP (S series) l

PEEK (natural) – brass/bronze nickel 2) brass nickel Only for FFP, ERN and PCP (S series) l

PSU – brass/bronze nickel 2) brass nickel Only for FFL (S series) 1) l

PPSU – brass/bronze nickel 2) brass nickel Only for FFL (S series) 1) l

PPS/brass –/nickel brass/bronze nickel 2) brass nickel Only for EPL and EXP (S series) l

113www.lemo.com

®®

Conductor

Solid Stranded

AWG Section (mm2)

min. max. min. max.

Fr1)

(N)

AWG

max. Section

max.

(mm2)

Contacts reference for plugs, free or fixed sockets

Contact

ø A ø C Form

(mm) (mm) per fig.

0.7 0.80 1

0.7 0.45 2

0.9 1.10 1

0.9 0.80 2

0.9 0.45 2

1.3 1.40 1

1.3 1.10 2

1.3 0.80 2

1.6 1.90 1

1.6 1.40 2

2.0 2.40 1

2.0 1.90 2

Notes

l

ø A

ø C

ø A

ø C

Contact type

– – 26 222) 0.140 0.34 22

– – 32 28 0.035 0.09 22

– – 24 20 0.250 0.50 30

– – 26 222) 0.140 0.34 30

– – 32 28 0.035 0.09 30

– – 20 18 0.500 1.00 40

– – 24 20 0.250 0.50 40

– – 26 222) 0.140 0.34 40

– – 18 142) 1.000 1.50 50

– – 22 18 0.340 1.00 50

– – 16 122) 1.500 2.50 65

– – 18 14 1.500 1.50 65

L dimensions and C are detailed in the section on PCB drilling pattern.

See page 167.

L dimensions and C are detailed in the section on PCB drilling pattern.

See page 168.

ø A

ø C

ø A ø C

ø C

ø A

L

ø C

L

ø A

fig. 1

fig. 2

Solder

l

Crimp

Print

Print (elbow)

28 0.09 – 28 – 0.09 –

24 0.25 – 26 – 0.14 –

22 0.34 – 222) – 0.34 –

20 0.50 – 202) – 0.50 –

16 1.00 – 18 – 1.00 –

14 1.50 – 16 – 1.50 –

10 4.00 – 12 – 4.00 –

10 6.00 – 10 – 6.00 –

– – – 8 – 10.00 –

– – – 4 – 21.00 –

– – – 0 – 50.00 –

l

0.5 0.45 –

0.7 0.60 –

0.9 0.80 –

1.3 1.00 –

1.6 1.40 –

2.0 1.80 –

3.0 2.70 –

4.0 3.70 –

5.0 5.20 –

6.0 5.20 –

8.0 7.00 –

12.0 11.50 –

A L

D N

V V

C M

B P

C M

B P

G U

C M

B P

G U

C M

B P

C M

B P

Reference

Male Female

Note: 1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).

2) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter.

Make sure that the maximum conductor diameter is smaller than ø C.

lFirst choice alternative lSpecial order alternative

114 www.lemo.com

®®

1 2

3

21

3

2

5

1

64

1

2

5

3

46

2 1

3

1 2

3

1

2

5

3

46

3

2

5

1

64

Unipole Unipole

Multipole

(odd)

Multipole

(even)

Unipole

Multipole

(odd)

Multipole

(even)

AMale - Female

Contacts reference for fixed and free couplers RMA, RAD and SWH

MFemale - Female

LFemale - Male

Use of plugs for mating with RAD, RMA and SWH couplers

Unipole type:

Reference M for coupling two identical plugs fitted with male contact (contact reference A).

Reference L for coupling a plug fitted with male contacts (contact reference A) at the flange end for RAD and SWH and

an inverted plug fitted with female contacts (contact reference L) at the other end.

Reference A for the inverted version of code L.

Multipole type:

Reference L for coupling a standard plug (contact reference A) at the flange end for RAD and SWH and an inverted plug

(contact reference as indicated in the above table) at the other end.

Reference M for coupling two standard plugs (contact type A).

Only available for RAD and RMA models.

Note: 1) this connector combination does not allow for contact numbering. One of the plugs has to be cable mounted in a way to ensure correct

signal continuity.

LA

Reference for plug

A

L

A1)

A

A1)

Reference for plug

Contacts reference for coupler and plug with socket

Contact type Remarks

Male - Female contact configuration is explained below

Female - Male contact configuration is explained below

Female - Female contact configuration is explained below

A

L

M

Ref.

115www.lemo.com

®®

Collets (S and E series)

00 1.7 1.5 1.7 1.3

2.2 – 2.2 > 1.7

2.7 – 2.7 > 2.2

3.1 2.7 3.1 > 2.7

3.7 – 3.7 > 3.2

4.2 3.7 4.4 > 3.7

2.7 – 2.6 2.2

3.1 – 3.0 2.6

2)

Collet ø Cable ø

ø A ø B max. min.

C 17

C 22

C 27

C 31

K 37

K 42

L 27

L 31

0S 2.2 – 2.2 1.3

3.2 – 3.2 > 2.2

3.7 – 3.7 > 3.2

4.4 3.7 4.4 > 3.7

5.2 – 5.2 > 4.2

5.7 5.2 5.7 > 5.2

6.2 5.2 6.2 > 5.7

2.2 – 2.2 1.3

3.2 – 3.2 > 2.2

3.7 – 3.7 > 3.2

4.4 – 4.3 3.5

4.8 – 4.8 4.4

3)

2)

1) 2)

C 22

C 32

C 37

C 44

K 52

K 57

K 62

L 22

L 32

L 37

L 44

L 48

Reference

Type Code Notes

1S 2.2 – 2.2 1.2

3.2 – 3.2 > 2.2

4.2 – 4.2 > 3.2

5.2 – 5.2 > 4.2

6.2 – 6.2 > 5.2

6.6 – 6.5 5.9

2)

1) 2)

Collet ø Cable ø

ø A ø B max. min.

L 22

L 32

L 42

L 52

L 62

L 66

Reference

Type Code Notes

C, K and L type collets for S series

C type

L type

(non EMC)

ø B

ø A

K type

oversize

cable collet

ø B

ø A

Note: All dimensions are in millimetres.

1) these collets cannot be used for connectors models with nut for fitting a bend relief. 2) these collets cannot be used for elbow connectors. 3) the inner

diameter of the smallest bend relief available is 2.5 mm.

2S 2.7 – 2.7 1.3

3.2 – 3.2 > 2.5

4.2 – 4.2 > 3.2

5.2 – 5.2 > 4.2

6.2 – 6.2 > 5.2

7.2 6.7 7.2 > 6.2

8.2 6.7 8.2 > 7.2

8.7 6.7 8.7 > 8.2

9.7 9.0 9.7 > 8.7

10.5 9.0 10.5 > 9.5

3.2 – 3.2 2.5

4.2 – 4.2 > 3.2

5.2 – 5.2 > 4.2

6.2 – 6.2 > 5.2

7.2 – 7.2 > 6.2

8.2 – 8.2 > 7.2

8.7 – 8.7 > 8.2

2)

1) 2)

C 27

C 32

C 42

C 52

C 62

C 72

C 82

C 87

K 97

K 11

L 32

L 42

L 52

L 62

L 72

L 82

L 87

1S 2.2 – 2.2 1.4

3.2 – 3.2 > 2.2

4.2 – 4.2 > 3.2

5.2 – 5.2 > 4.2

5.7 5.2 5.7 > 5.2

6.2 5.2 6.2 > 5.7

7.2 – 7.2 > 6.2

8.2 6.7 8.2 > 7.2

8.7 6.7 8.7 > 8.2

C 22

C 32

C 42

C 52

C 57

C 62

K 72

K 82

K 87

116 www.lemo.com

®®

Note: All dimensions are in millimetres.

1) these collets cannot be used for connectors models with nut for fitting a bend relief.

2) these collets cannot be used for elbow connectors.

3S 4.2 7.7 4.2 2.6

5.7 7.7 5.7 4.3

7.2 7.7 7.2 5.8

8.7 8.7 8.7 7.3

9.7 9.0 9.7 8.8

10.5 9.0 10.5 9.8

12.2 – 12.0 11.1

13.2 12.2 13.0 12.1

4.2 – 4.2 2.6

5.7 – 5.7 > 4.2

7.2 – 7.2 > 5.7

8.7 – 8.7 > 7.2

9.7 – 9.7 > 8.7

10.7 – 10.7 > 9.7

2)

1) 2)

Collet ø Cable ø

ø A ø B max. min.

C 42

C 57

C 72

C 87

C 97

C 11

K 12

K 13

L 42

L 57

L 72

L 87

L 97

L 11

Reference

Type Code Notes Collet ø Cable ø

ø A ø B max. min.

Reference

Type Code Notes

C, K and L type collets for S series

C type

L type

(non EMC)

ø B

ø A

K type

oversize

cable collet

ø B

ø A

4S 12.2 – 12.0 11.1

13.2 12.2 13.0 12.6

14.2 – 14.0 13.1

15.2 – 15.0 14.1

16.2 – 16.0 15.1

17.2 – 17.0 16.1

18.2 – 18.0 17.1

19.2 – 19.0 18.1

20.2 19.7 20.0 19.1

21.2 19.7 21.0 20.1

22.2 19.7 22.0 21.1

5.2 – 5.0 4.1

6.2 – 6.0 5.1

7.2 – 7.0 6.1

8.2 – 8.0 7.1

9.2 – 9.0 8.1

10.2 – 10.0 9.1

11.2 – 11.0 10.1

12.2 – 12.0 11.1

13.2 – 13.0 12.6

1)

2)

C 12

C 13

K 14

K 15

K 16

K 17

K 18

K 19

K 20

K 21

K 22

L 52

L 62

L 72

L 82

L 92

L 10

L 11

L 12

L 13

4S 5.2 – 5.0 4.1

6.2 – 6.0 5.1

7.2 – 7.0 6.1

8.2 – 8.0 7.1

9.2 – 9.0 8.1

10.2 – 10.0 9.1

11.2 – 11.0 10.1

C 52

C 62

C 72

C 82

C 92

C 10

C 11

117www.lemo.com

®®

Note: All dimensions are in millimetres.

The 5S.112 is only available with L type of collet.

1) these collets cannot be used for connectors models with nut for fitting a bend relief.

2) these collets cannot be used for elbow connectors.

Collet ø Cable ø

ø A ø B max. min.

Reference

Type Code Notes

5S 7.2 – 7.0 6.1

8.2 – 8.0 7.1

9.2 – 9.0 8.1

10.2 – 10.0 9.1

11.2 – 11.0 10.1

12.2 – 12.0 11.1

13.2 – 13.0 12.1

14.2 – 14.0 13.1

15.2 – 15.0 14.1

16.2 – 16.0 15.1

17.2 – 17.0 16.1

18.2 – 18.0 17.1

19.2 – 19.0 18.1

20.2 19.7 20.0 19.1

21.2 19.7 21.0 20.1

22.2 19.7 22.0 21.1

23.2 – 23.0 22.1

24.2 – 24.0 23.1

25.2 – 25.0 24.1

1)

C 72

C 82

C 92

C 10

C 11

C 12

C 13

C 14

C 15

C 16

C 17

C 18

C 19

C 20

C 21

C 22

K 23

K 24

K 25

Collet ø Cable ø

ø A ø B max. min.

Reference

Type Code Notes

5S 26.2 – 26.0 25.1

27.2 – 27.0 26.1

28.2 27.2 28.0 27.1

29.2 27.2 29.0 28.1

30.2 27.2 30.0 29.1

9.2 – 9.0 8.1

10.2 – 10.0 9.1

11.2 – 11.0 10.1

12.2 – 12.0 11.1

13.2 – 13.0 12.1

14.2 – 14.0 13.1

15.2 – 15.0 14.1

16.2 – 16.0 15.1

17.2 – 17.0 16.1

18.2 – 18.0 17.1

19.2 – 19.0 18.1

20.2 – 20.0 19.1

21.2 – 21.0 20.1

1)

1) 2)

K 26

K 27

K 28

K 29

K 30

L 92

L 10

L 11

L 12

L 13

L 14

L 15

L 16

L 17

L 18

L 19

L 20

L 21

C, K and L type collets for S series

C type

L type

(non EMC)

ø B

ø A

K type

oversize

cable collet

ø B

ø A

118 www.lemo.com

®®

Note: All dimensions are in millimetres.

1) these collets cannot be used for connectors models with nut for fitting a bend relief.

2) these collets cannot be used for elbow connectors..

Collet ø Cable ø

ø A ø B max. min.

Reference

Type Code Notes

6S 12.2 – 12.0 11.1

13.2 – 13.0 12.1

14.2 – 14.0 13.1

15.2 – 15.0 14.1

16.2 – 16.0 15.1

17.2 – 17.0 16.1

18.2 – 18.0 17.1

19.2 – 19.0 18.1

20.2 – 20.0 19.1

21.2 – 21.0 20.1

22.2 – 22.0 21.1

23.2 – 23.0 22.1

24.2 – 24.0 23.1

25.2 – 25.0 24.1

26.2 – 26.0 25.1

27.2 – 27.0 26.1

28.2 27.2 28.0 27.1

29.2 27.2 29.0 28.1

30.2 27.2 30.0 29.1

1)

C 12

C 13

C 14

C 15

C 16

C 17

C 18

C 19

C 20

C 21

C 22

C 23

C 24

C 25

C 26

C 27

C 28

C 29

C 30

Collet ø Cable ø

ø A ø B max. min.

Reference

Type Code Notes

6S 12.2 – 12.0 11.1

13.2 – 13.0 12.1

14.2 – 14.0 13.1

15.2 – 15.0 14.1

16.2 – 16.0 15.1

17.2 – 17.0 16.1

18.2 – 18.0 17.1

19.2 – 19.0 18.1

20.2 – 20.0 19.1

21.2 – 21.0 20.1

22.2 – 22.0 21.1

23.2 – 23.0 22.1

24.2 – 24.0 23.1

25.2 – 25.0 24.1

26.2 – 26.0 25.1

27.2 – 27.0 26.1

28.2 – 28.0 27.1

29.2 – 29.0 28.1

30.2 – 30.0 29.1

1) 2)

L 12

L 13

L 14

L 15

L 16

L 17

L 18

L 19

L 20

L 21

L 22

L 23

L 24

L 25

L 26

L 27

L 28

L 29

L 30

C, K and L type collets for S series

C type

L type

(non EMC)

ø B

ø A

K type

oversize

cable collet

ø B

ø A

119www.lemo.com

®®

C and K type collets for E series

C type

ø B

ø A

K type

oversize

cable collet

ø B

ø A

Note: all dimensions are in millimetres.

1) the inner diameter of the smallest bend relief available is 2.5 mm.

2) the inner diameter of the largest bend relief available is 14.5 mm.

3) for 2B bend relief.

4) for 3B bend relief.

5) for 4B bend relief.

0E 1.6 – 1.2 1.0

1.6 – 1.5 1.3

2.1 – 2.0 1.6

3.1 – 2.5 2.1

3.1 – 3.0 2.6

4.2 4.2 3.5 3.1

4.2 4.2 4.0 3.6

5.2 5.2 4.5 4.1

5.2 5.2 5.0 4.6

1)

Collet ø Cable ø

ø A ø B max. min.

C 10

C 15

C 20

C 25

C 30

C 35

C 40

C 45

C 50

1E 1.6 – 1.5 1.3

2.2 – 2.0 1.6

3.2 – 2.5 2.1

3.2 – 3.0 2.6

4.2 – 3.5 3.1

4.2 – 4.0 3.6

5.2 – 4.5 4.1

5.2 – 5.0 4.6

6.2 6.2 5.5 5.1

6.2 6.2 6.0 5.6

7.2 6.7 6.5 6.1

7.2 – 7.0 6.6

8.2 8.2 7.5 7.1

8.2 8.2 8.0 7.6

9.2 8.6 8.5 8.1

3)

C 15

C 20

C 25

C 30

C 35

C 40

C 45

C 50

C 55

C 60

C 65

K 70

K 75

K 80

K 85

Reference

Type Code Notes

2E 7.2 – 7.0 6.6

8.2 8.2 7.5 7.1

8.2 8.2 8.0 7.6

9.2 8.6 8.5 8.1

9.2 – 9.0 8.6

10.2 10.2 9.5 9.1

10.2 10.2 10.0 9.6

11.2 10.6 10.5 10.1

4)

Collet ø Cable ø

ø A ø B max. min.

C 70

C 75

C 80

C 85

K 90

K 95

K 10

K 11

Reference

Type Code Notes

2E 2.2 – 1.5 1.3

2.2 – 2.0 1.6

3.2 – 2.5 2.1

3.2 – 3.0 2.6

4.2 – 3.5 3.1

4.2 – 4.0 3.6

5.2 – 4.5 4.1

5.2 – 5.0 4.6

6.2 – 5.5 5.1

6.2 – 6.0 5.6

7.2 – 6.5 6.1

C 15

C 20

C 25

C 30

C 35

C 40

C 45

C 50

C 55

C 60

C 65

3E 3.2 – 3.0 2.6

4.2 – 3.5 3.1

4.2 – 4.0 3.6

5.2 – 4.5 4.1

5.2 – 5.0 4.6

6.2 – 5.5 5.1

6.2 – 6.0 5.6

7.2 – 6.5 6.1

7.2 – 7.0 6.6

8.2 – 7.5 7.1

8.2 – 8.0 7.6

9.2 – 8.5 8.1

9.2 – 9.0 8.6

10.2 10.2 9.5 9.1

10.2 10.2 10.0 9.6

11.2 10.6 10.5 10.1

12.3 – 12.0 10.6

13.8 13.8 12.8 12.1

13.8 13.8 13.5 12.9

15.3 15.3 14.0 13.6

15.3 15.3 15.0 14.1

5)

2)

C 30

C 35

C 40

C 45

C 50

C 55

C 60

C 65

C 70

C 75

C 80

C 85

C 90

C 95

C 10

C 11

K 11

K 12

K 13

K 14

K 15

120 www.lemo.com

®®

C and K type collets for E series

C type

ø B

ø A

K type

oversize

cable collet

ø B

ø A

Collet ø Cable ø

ø A ø B max. min.

Reference

Type Code Notes

4E 6.3 – 5.0 4.8

6.3 – 5.5 5.1

6.3 – 6.0 5.6

7.3 – 6.5 6.1

7.3 – 7.0 6.6

8.3 – 7.5 7.1

8.3 – 8.0 7.6

9.3 – 8.5 8.1

9.3 – 9.0 8.6

10.8 – 9.5 9.1

10.8 – 10.5 9.6

12.3 – 12.0 10.6

13.8 13.8 12.8 12.1

13.8 13.8 13.5 12.9

15.3 15.3 14.0 13.6

15.3 15.3 15.0 14.1

17.8 – 16.5 15.6

17.8 – 17.5 16.6

19.8 – 18.5 17.6

19.8 – 19.5 18.6

21.8 – 20.5 19.6

21.8 – 21.5 20.6

23.8 23.8 22.5 21.6

23.8 23.8 23.5 22.6

2)

1)

C 50

C 55

C 60

C 65

C 70

C 75

C 80

C 85

C 90

C 95

C 10

C 11

C 12

C 13

C 14

C 15

K 16

K 17

K 18

K 19

K 20

K 21

K 22

K 23

Collet ø Cable ø

ø A ø B max. min.

Reference

Type Code Notes

5E 11.8 – 10.5 9.6

11.8 – 11.5 10.6

13.8 – 12.5 11.6

13.8 – 13.5 12.6

15.8 – 14.5 13.6

15.8 – 15.5 14.6

17.8 – 16.5 15.6

17.8 – 17.5 16.6

19.8 – 18.5 17.6

19.8 – 19.5 18.6

21.8 – 20.5 19.6

21.8 – 21.5 20.6

23.8 23.8 22.5 21.6

23.8 23.8 23.5 22.6

1)

C 10

C 11

C 12

C 13

C 14

C 15

C 16

C 17

C 18

C 19

C 20

C 21

C 22

C 23

6E 14.2 – 14.0 13.0

15.2 – 15.0 14.1

15.7 – 15.5 14.6

16.7 – 16.5 15.6

18.2 – 18.0 17.1

23.2 – 21.5 20.6

23.2 – 22.0 21.1

23.2 – 23.0 22.1

27.2 – 27.0 26.1

30.2 – 30.0 29.5

1)

C 14

C 15

C 16

C 17

C 18

C 21

C 22

C 23

C 27

L 30

Note: all dimensions are in millimetres.

1) these collets cannot be used for connector models with nut for fitting a bend relief. No bend relief available for this cable size.

2) the inner diameter of the largest bend relief available is 14.5 mm.

121www.lemo.com

®®

Bend relief for S series models with collet

Need to be ordered

Bend relief for E series models with collet

Need to be ordered

separately

(see pages 145 and 146)

Ref.

Collet

Type Code

Variant (S and E series)

00 Z

GMA.00.0ll.Dl

GMA.0B.0ll.Dl

GMA.00.0ll.Dl

C 17 to 31

K 37 to 42

L 27 to 31

0S Z

GMA.0B.0ll.Dl

GMA.1B.0ll.Dl

GMA.0B.0ll.Dl

C 32 to 44

K 52 to 62

L 32 to 48

1S Z

GMA.1B.0ll.Dl

GMA.2B.0ll.Dl

GMA.1B.0ll.Dl

C 32 to 62

K 72 to 87

L 32 to 66

2S Z

GMA.2B.0ll.Dl

GMA.3B.0ll.Dl

GMA.2B.0ll.Dl

C 42 to 87

K 97 to 11

L 42 to 87

3S Z

GMA.3B.0ll.Dl

GMA.4B.0ll.Dl

GMA.3B.0ll.Dl

C 57 to 97

K 12 to 13

L 57 to 97

4S Z

GMA.4B.0ll.Dl

C 82 to 13

L 82 to 13

GMA.0B.lll.ll

C 10 to 50

0E

Need to be ordered

separately

(see pages 145 and 146)

Z

Ref.

Collet

Type Code

1E

2E

3E Z

GMA.3B.lll.ll

GMA.4B.lll.ll

C 30 to 10

K 11 to 15 1)

GMA.4B.lll.ll

C 50 to 15 2)

4E Z

GMA.4B.lll.ll

C 10 to 14

5E Z

Z

GMA.1B.lll.ll

GMA.2B.lll.ll

C 15 to 65

K 70 to 85

Z

GMA.2B.lll.ll

GMA.3B.lll.ll

C 15 to 85

K 90 to 10

Note: all dimensions are in millimetres.

1) for K15 see page 119.

2) for C15 see page 120.

122 www.lemo.com

®®

Plastic shell Aluminium alloys

PSU PPSU PA.6 Anodized colour Anodized colour

for bend relief collet nut

Colour of connectors shell made of plastic material and aluminium alloys

Colour

Note: other anodizing colours are available for

connectors with collet nut for bend relief. Please

consult us.

A

B

G

J

M

N

R

S

T

V

L

X

F

Ref.

l l

l

l l

l

l l

l

blue

white

grey

yellow

brown

black

red

orange

natural

green

black

natural

cream

Watertight and vacumtight socket and coupler models (S and E series)

O-ring and gasket material (E series)

Standard connectors are delivered with silicone o-ring and gaskets. The vacuumtight models, identified with the letter

«PV», are delivered with Viton®gaskets. Other gaskets material can be delivered upon special request.

S P PV

Reference

Watertight Vacuumtight

EWB, HCP, HGP,

HGW, SWH

E P PV EBR, HGP, SWH

Model

H

E

D

Ref. O-ring material

FPM (Viton®)

EPDM

FPM (Viton®) and collet nut for bend relief

123www.lemo.com

®®

M Series

Fixed socketsStraight plugs

EGFree sockets

PM

PMPMPM

PHPHEG

PHFGFGFGFAFAFAFM

FMFixed sockets Fixed socketStraight plugs

FMFMFWFWFWFXFXFX

FMFixed sockets Free socketsStraight plugs

PB

PBPBPV

PV

PFPFECECEDED

HEPEPE

EGFGEGEG

PHFGED

The M Series connector offers a new innovative design for avionics, aerospace, military, security, motorsport and heavy

duty applications.

Made of high-strength aluminium, this connector is one of the lightest and most compact of the LEMO product line.

A one-grip ratchet screw system enables quick and secure coupling of the connectors. The arctic grip makes it easy to

manipulate the connector while wearing gloves or when the connector is located in a difficult to access area.

Features

– Ratchet-coupling mechanism – Quick mating: less than 3/4 turn to seat

– Compact design for space savings – Lightweight

– Oil and fuel resistant – High vibration and shock resistance

– 360° screening for full EMC shielding – Sealed to IP68 when mated

– Colour coding / keying – Reverse gender configuration

– Scoop proof – Pin configuration from 2 to 114 contacts

– Threaded for MIL-DTL-38999L backshell

Metal housing models

Watertight

model

(unmated)

USB models

Fibre optic models

124 www.lemo.com

®®

outer shell

o-ring

hexagonal nut

insulator

female contact

earthing crown

4

5

6

1

3

2

outer shell

insulator

male contact

rear seal

tightening screw

ratchet mechanism

spring

1

3

2

4

5

6

7

Fixed socket Straight plug

21

3

46

52

3

17 5 6 4

Note: 1) anthracite colour / 48 hours salt fog resistance. 2) anthracite colour / 500 hours salt fog resistance RoHS 2/REACH.

Part Section Showing Internal Components

FMN.1M.305.XLC = straight plug with key (N), 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium

alloy, PEEK insulator, male crimp contacts

PMN.1M.305.XLMT = free socket with key (N), 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium

alloy, PEEK insulator, female crimp contacts and mold stop.

HEN.1M.305.XLNP = fixed socket, nut fixing, with key (N), 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-

plated aluminium alloy, PEEK insulator, female print contacts, watertight.

FGN.1M.305.XLCM = straight plug with key (N), arctic grip, 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-

plated aluminium alloy, PEEK insulator, male crimp contacts and with MIL-DTL-38999L thread for additional backshell (not supplied).

Free socket

Part Numbering System

Plug

F M N 1M 3 0 5

Insert configuration

Housing:

C = Chrome-plated brass

X = Nickel-plated aluminium alloy 1)

I = NiCorAlTMNickel

fluorocarbon polymer

aluminium alloy 2)

Alignment key

Model

Series

X L C

Contact

Insulator:

L = PEEK (multipole)

R = PEEK (mixed multipole)

Variant:

T = Mold stop

P = Potted

M= MIL-DTL-38999L shell thread

...

M

F G N 1M 3 0 5 X L C

.. .

T

P M N 1M 3 0 5 X L M

.. .

Fixed socket P

H E N 1M 3 0 5 X L N

.. .

More informations on: https://www.lemo.com/catalog/ROW/UK_English/M_series.pdf

125www.lemo.com

®®

Free socket

Fixed sockets

Straight plugs

Straight plug Fixed socket

FGl

FNl

EGl

EEl

EFl

ECl

EClEDl

EHl

FGlEHlHElHEl

PEl

PHl

PBl

The F series connectors have been specially developed to meet the most demanding requirements in terms of dimen-

sions, weight and watertightness. Our manufacturing programme includes now 8 series. This series provides customers

with many features and benefits including:

– push-pull self-latching system for safe connection

– sealed to IP67 for environmental protection when mated according to IEC 60529

– compact scoop-proof design and use of aluminium alloy

– high shock and vibration resistance

– multipole types with 2 to 68 contacts or multifibre optic or mixed FO + LV in 2F series

– crimp or print contacts (straight or elbow)

– keys ensuring ease of blind mating

– colour coded key options for system security.

The F series connectors are available in 3 different materials:

– for high shock and vibration resistance, LEMO recommends using Y code material (with beryllium copper latch sleeve).

– for environmental resistance and latching cycle endurance, LEMO recommends using the C code material

(brass outershell).

– for lightweight and latching cycle endurance, LEMO recommends using X code material (aluminium shell).

– for lightweight and salt spray corrosion resistance, LEMO recommends using I code material (aluminium shell).

Each series includes several models of plugs and sockets available in contact configur ations adapted to all round cables,

including up to 68 conductors, and a maximum diameter of 34 mm. Since LEMO connectors are perfectly screened and

designed to guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications

where electromagnetic compatibility (EMC) is important. A large number of accessories as well as tooling for cable

assembly are available.

Metal housing models

Models for fibre optic Watertight models

F Series

126 www.lemo.com

®®

FGN.0F.305.YLC = straight plug with key (N), 0F series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium

alloy, beryllium copper latch sleeve, PEEK insulator, male crimp contacts.

HEN.0F.305.XLNP = fixed socket, nut fixing, with key (N), 0F series, multipole type with 5 contacts, outer shell in anthracite nickel-plated

aluminium alloy, PEEK insulator, female print contacts, watertight.

PHN.0F.305.XLM = free socket with key (N), 0F series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium

alloy, PEEK insulator, female crimp contacts.

Free socket

Part Numbering System

Plug F G N 0F 3 0 5

Insert configuration

Alignment key

Model

Series

Y L C

T 66 Z

Contact4)

Insulator: L = PEEK

Housing

Variant3)

Variant:

F = reduced unlatching force1)

S = o-ring & gasket in silicone2)

T = f.o. cable adapter and ø5)

Z = collet nut for bend relief

.. .

P H N 0F 3 0 5 X L M

.. .

Fixed socket P

H E N 0F 3 0 5 X L N

.. .

outer shell

earthing crown

insulator

female contact

rear seal

front nut

4

5

6

3

1

2

Straight socket

outer shell

latch sleeve

insulator

male contact

gasket

rear seal

4

3

5

6

1

2

Straight plug

41

2

36

5535

4

12 6

or

Note: 1) for straight plug only. 2) with shell material code X or Y. 3) potting for HElonly. 4) HElavailable only with print contacts (straight or elbow).

5) connectors for fibre-optic are delivered without the fibre optic contacts, they must be ordered separately.

Part Section Showing Internal Components

More informations on: https://www.lemo.com/catalog/ROW/UK_English/f_series.pdf

SPARE PARTS

®®

128 www.lemo.com

ø (mm) Cond. AWG

A C min. max.

Fig.

Types

302 / 303 / 304 0.5 0.45 1 32 28

302 / 303

304 / 305

306 / 307 / 309

1.10 1 24 20

0.9 0.80 2 26 22

0.45 2 32 28

0.80 1 26 22

0.7

0.45 2 32 28

0.5 0.45 1 32 28

302 / 303

304 / 305

306 / 307 / 308

310 / 314 / 316

1.40 1 20 18

1.3

1.10 2 24 20

1.10 1 24 20

0.9

0.80 2 26 22

0.80 1 26 22

0.7

0.45 2 32 28

0.5 0.45 1 32 28

2.40 1 16 12

2.0

1.90 2 18 14

1.90 1 18 14

1.6

1.40 2 22 18

1.40 1 20 18

1.3 1.10 2 24 20

0.80 2 26 22

1.10 1 24 20

0.9 0.80 2 26 22

0.45 2 32 28

0.80 1 26 22

0.7

0.45 2 32 28

FGG.00.554.ZZC EGG.00.654.ZZM

FGG.0B.560.ZZC EGG.0B.660.ZZM

FGG.0B.561.ZZC EGG.0B.661.ZZM

FGG.0B.562.ZZC EGG.0B.662.ZZM

FGG.0B.555.ZZC EGG.0B.655.ZZM

FGG.0B.556.ZZC EGG.0B.656.ZZM

FGG.0B.554.ZZC –

FGG.1B.565.ZZC EGG.1B.665.ZZM

FGG.1B.566.ZZC EGG.1B.666.ZZM

FGG.1B.560.ZZC EGG.1B.660.ZZM

FGG.1B.561.ZZC EGG.1B.661.ZZM

FGG.1B.555.ZZC EGG.1B.655.ZZM

FGG.1B.556.ZZC EGG.1B.656.ZZM

FGG.1B.554.ZZC –

FGG.2B.575.ZZC EGG.2B.675.ZZM

FGG.2B.576.ZZC EGG.2B.676.ZZM

FGG.2B.570.ZZC EGG.2B.670.ZZM

FGG.2B.571.ZZC EGG.2B.671.ZZM

FGG.2B.565.ZZC EGG.2B.665.ZZM

FGG.2B.566.ZZC EGG.2B.666.ZZM

FGG.2B.567.ZZC EGG.2B.667.ZZM

FGG.2B.560.ZZC EGG.2B.660.ZZM

FGG.2B.561.ZZC EGG.2B.661.ZZM

FGG.2B.562.ZZC EGG.2B.662.ZZM

FGG.2B.555.ZZC EGG.2B.655.ZZM

FGG.2B.556.ZZC EGG.2B.656.ZZM

Contact part number

Male Female

302

303

304 / 305

306 / 307

308 / 310

312 / 314 / 316

318 / 319

Insulator part number

Male contact Female contact

FGG.00.30l.YL EGG.00.40l.YL

FGG.0B.30l.YL EGG.0B.40l.YL

FGG.0B.30l.YL –

FGG.1B.30l.YL EGG.1B.40l.YL

FGG.1B.3ll.YL –

FGG.2B.302.YL EGG.2B.402.YL

FGG.2B.303.YL EGG.2B.403.YL

FGG.2B.30l.YL EGG.2B.40l.YL

FGG.2B.3ll.YL EGG.2B.4ll.YL

Spare parts for crimp contacts

0B

0K

0T

00

TT

0S

1S

1B

1K

1T

2B

2K

2T

302

304

1.40 1 20 18

1.3

1.10 2 24 20

1.10 1 24 20

0.9

0.80 2 26 22

FGG.1B.565.ZZC EGG.1B.665.ZZM

FGG.1B.566.ZZC EGG.1B.666.ZZM

FGG.1B.560.ZZC EGG.1B.660.ZZM

FGG.1B.561.ZZC EGG.1B.661.ZZM

– –

302

303 / 304

1.10 1 24 20

0.9 0.80 2 26 22

0.45 2 32 28

0.80 1 26 22

0.7

0.45 2 32 28

FGG.0B.560.ZZC EGG.0B.660.ZZM

FGG.0B.561.ZZC EGG.0B.661.ZZM

FGG.0B.562.ZZC EGG.0B.662.ZZM

FGG.0B.555.ZZC EGG.0B.655.ZZM

FGG.0B.556.ZZC EGG.0B.656.ZZM

– –

®®

129www.lemo.com

These positioners are suitable for use with both manual

and pneumatic crimping tools according to the MIL-C-

22520/7-01 standard.

male female

ø A ø C

Fig. 1

ø A ø C

Fig. 2

FGG

EGG

FGG

EGG

Note: a wide variation of strand number and diameter

combinations are quoted as being AWG, some of which

do not have a large enough cross section to guarantee

a crimp as per either MIL-C-22520/1-01 or /7-01.

DCE Positioners ø 0.5-0.7-0.9-1.3 mm 3)

DCE.91.050.0VC DCE.91.050.0VM

DCE.91.090.BVC DCE.91.090.BVM

DCE.91.090.AVC DCE.91.090.AVM

DCE.91.070.BVC DCE.91.070.BVM

DCE.91.050.BVC DCE.91.050.BVM

DCE.91.131.BVC DCE.91.131.BVM

DCE.91.091.BVC DCE.91.091.BVM

DCE.91.071.BVC DCE.91.071.BVM

DCE.91.051.BVC DCE.91.051.BVM

DCE.91.202.BVCM

DCE.91.162.BVCM

DCE.91.132.BVC DCE.91.132.BVM

DCE.91.132.CVC DCE.91.132.CVM

DCE.91.092.BVC DCE.91.092.BVM

DCE.91.092.AVC DCE.91.092.AVM

DCE.91.072.BVC DCE.91.072.BVM

Positioners part number 3)

Male contact Female contact

Note: these turrets can be used with manual crimping

tool according to MIL-C-22520/1-01 standard.

DCE Turret for ø 1.6-2.0-3.0-4.0 mm 3)

male female

Note: each insulator can be used both for crimp con-

tacts of normal shape (fig. 1) or with reduced crimp

barrel (fig. 2).

FGG-EGG Insulators

FGG-EGG Crimp contacts

Tools for crimp contacts

DCF Automatic extraction tools

Extractors part

number for male/

female contacts

DCF.91.050.2LT

DCF.91.090.2LT

DCF.92.070.3LT

DCF.91.050.2LT

DCF.91.131.2LT

DCF.91.090.2LT

DCF.91.070.2LT

DCF.91.050.2LT

DCC.91.202.5LA 1)

DCF.91.162.2LT

DCF.91.131.2LT

DCF.91.090.2LT

DCF.91.070.2LT 2)

Types

302 / 303 / 304

302 / 303

304 / 305

306 / 307 / 309

302 / 303

304 / 305

306 / 307 / 308

310 / 314 / 316

302

303

304 / 305

306 / 307

308 / 310

312 / 314 / 316

318 / 319

FGG EGG

DCE.91.131.BVC DCE.91.131.BVM

DCE.91.091.BVC DCE.91.091.BVM

–

302

304

DCE.91.090.BVC DCE.91.090.BVM

DCE.91.090.AVC DCE.91.090.AVM

DCE.91.070.BVC DCE.91.070.BVM

DCF.93.090.4LT

DCF.91.070.2LT

302

303 / 304

0B

0K

0T

00

TT

0S

1S

1B

1K

1T

2B

2K

2T

Note:

1) this model is thumb-operated.

2) for inverted contacts, please use DCF.92.070.3LT instead.

3) please consult page 132 for the corresponding crimping tools.

Note: (not valid for FAl and FWl models)

130 www.lemo.com

®®

FGG.3B.580.ZZC EGG.3B.680.ZZM

FGG.3B.575.ZZC EGG.3B.675.ZZM

FGG.3B.576.ZZC EGG.3B.676.ZZM

FGG.3B.570.ZZC EGG.3B.670.ZZM

FGG.3B.571.ZZC EGG.3B.671.ZZM

FGG.3B.565.ZZC EGG.3B.665.ZZM

FGG.3B.566.ZZC EGG.3B.666.ZZM

FGG.3B.560.ZZC EGG.3B.660.ZZM

FGG.3B.561.ZZC EGG.3B.661.ZZM

FGG.3B.562.ZZC EGG.3B.662.ZZM

FGG.3B.555.ZZC EGG.3B.655.ZZM

FGG.3B.556.ZZC EGG.3B.656.ZZM

302

303 / 304 / 309

305 / 306 / 307

308 / 309 / 310

312 / 314

316 / 318

320 / 322 / 324

326 / 330

3.0 3.20 1 14 10

2.40 1 16 12

2.0

1.90 2 18 14

1.90 1 18 14

1.6

1.40 2 22 18

1.40 1 20 18

1.3

1.10 2 24 20

1.10 1 24 20

0.9 0.80 2 26 22

0.45 2 32 28

0.80 1 26 22

0.7

0.45 2 32 28

FGG.3B.302.YL EGG.3B.402.YL

FGG.3B.30l.YL 1) EGG.3B.40l.YL 1)

FGG.3B.30l.YL EGG.3B.40l.YL

FGG.3B.3ll.YL 1) EGG.3B.4ll.YL 1)

FGG.3B.3ll.YL EGG.3B.4ll.YL

Note:

1) for 309 type the insulator part number is FGG.3B.309.ML (male contact) and EGG.3B.409.ML (female contact).

2) for 350 type the insulator part number is FGG.5B.350.ML (male contact) and EGG.5B.409.ML (female contact).

FGG.4B.580.ZZC EGG.4B.680.ZZM

FGG.4B.575.ZZC EGG.4B.675.ZZM

FGG.4B.576.ZZC EGG.4B.676.ZZM

FGG.4B.570.ZZC EGG.4B.670.ZZM

FGG.4B.571.ZZC EGG.4B.671.ZZM

FGG.4B.565.ZZC EGG.4B.665.ZZM

FGG.4B.566.ZZC EGG.4B.666.ZZM

FGG.4B.560.ZZC EGG.4B.660.ZZM

FGG.4B.561.ZZC EGG.4B.661.ZZM

FGG.4B.555.ZZC EGG.4B.655.ZZM

FGG.4B.556.ZZC EGG.4B.656.ZZM

304

306 / 307

310

312

316 / 320

324 / 330

340 / 348

3.0 3.20 1 14 10

2.40 1 16 12

2.0

1.90 2 18 14

1.90 1 18 14

1.6

1.40 2 22 18

1.40 1 20 18

1.3

1.10 2 24 20

1.10 1 24 20

0.9

0.80 2 26 22

0.80 1 26 22

0.7

0.45 2 32 28

FGG.4B.304.YL EGG.4B.404.YL

FGG.4B.30l.YL EGG.4B.40l.YL

FGG.4B.310.YL EGG.4B.410.YL

FGG.4B.312.YL EGG.4B.412.YL

FGG.4B.3ll.YL EGG.4B.4ll.YL

306

1.40 1 20 18

1.3 1.10 2 24 20

0.80 2 26 22

FGG.2B.565.ZZC EGG.2B.665.ZZM

FGG.2B.566.ZZC EGG.2B.666.ZZM

FGG.2B.567.ZZC EGG.2B.667.ZZM

– –

ø (mm) Cond. AWG

A C min. max.

Fig.

Types

Contact part number

Male Female

Insulator part number

Male contact Female contact

Spare parts for crimp contacts

FGG.5B.582.ZZC EGG.5B.682.ZZM

FGG.5B.580.ZZC EGG.5B.680.ZZM

FGG.5B.575.ZZC EGG.5B.675.ZZM

FGG.5B.576.ZZC EGG.5B.676.ZZM

FGG.5B.570.ZZC EGG.5B.670.ZZM

FGG.5B.571.ZZC EGG.5B.671.ZZM

FGG.5B.565.ZZC EGG.5B.665.ZZM

FGG.5B.566.ZZC EGG.5B.666.ZZM

FGG.5B.567.ZZC EGG.5B.667.ZZM

FGG.5B.560.ZZC EGG.5B.660.ZZM

FGG.5B.561.ZZC EGG.5B.661.ZZM

304

310

314 / 316

320

330 / 340 / 348

350 / 354 / 364

4.0 4.00 1 12 10

3.0 3.20 1 14 10

2.40 1 16 12

2.0

1.90 2 18 14

1.90 1 18 14

1.6

1.40 2 22 18

1.40 1 20 18

1.3 1.10 2 24 20

0.80 2 26 22

1.10 1 24 20

0.9

0.80 2 26 22

FGG.5B.304.ML EGG.5B.404.ML

FGG.5B.310.YL EGG.5B.410.YL

FGG.5B.3ll.YL EGG.5B.4ll.YL

FGG.5B.320.YL EGG.5B.420.YL

FGG.5B.3ll.YL EGG.5B.4ll.YL

FGG.5B.3ll.YL 2) EGG.5B.4ll.YL 2)

2S

3B

3K

3T

4B

4K

5B

5K

®®

131www.lemo.com

DCE.91.303.BVCM

DCE.91.203.BVCM

DCE.91.163.BVCM

DCE.91.133.BVC DCE.91.133.BVM

DCE.91.093.BVC DCE.91.093.BVM

DCE.91.093.BVG 3) DCE.91.093.BVU 3)

DCE.91.073.BVC DCE.91.073.BVM

Note:

1) this model is thumb-operated.

2) please consult page 132 for the corresponding crimping tools.

3) «G» and «U» positioners for reduced crimp barrel (see page 65 - fig. 2 for contact type

details).

DCF.91.303.5LT

DCC.91.202.5LA 1)

DCF.91.163.5LT

DCF.91.133.5LT

DCF.91.093.5LT

DCF.92.070.3LT

302

303 / 304 / 309

305 / 306 / 307

308 / 309 / 310

312 / 314

316 / 318

320 / 322 / 324

326 / 330

DCE.91.304.BVCM

DCE.91.204.BVCM

DCE.91.164.BVCM

DCE.91.134.BVC DCE.91.134.BVM

DCE.91.094.BVC DCE.91.094.BVM

DCE.91.074.BVC DCE.91.074.BVM

DCF.91.303.5LT

DCC.91.202.5LA 1)

DCF.91.163.5LT

DCF.91.133.5LT

DCF.91.093.5LT

DCF.91.073.5LT

DCE.91.132.BVC DCE.91.132.BVM

DCE.91.132.CVC DCE.91.132.CVM

–306

Positioners part number 2)

Male contact Female contact

Tools for crimp contacts

Extractors part

number for male/

female contacts

Types

304

306 / 307

310

312

316 / 320

324 / 330

340 / 348

DCE.91.405.BVCM

DCE.91.305.BVCM

DCE.91.205.BVCM

DCE.91.165.BVCM

DCE.91.135.BVC DCE.91.135.BVM

DCE.91.135.BVG DCE.91.135.BVU

DCE.91.095.BVC DCE.91.095.BVM

DCF.91.405.5LT

DCF.91.303.5LT

DCC.91.202.5LA 1)

DCF.91.163.5LT

DCF.91.133.5LT

DCF.91.093.5LT

304

310

314 / 316

320

330 / 340 / 348

350 / 354 / 364

2S

3B

3K

3T

4B

4K

5B

5K

These positioners are suitable for use with both manual

and pneumatic crimping tools according to the MIL-C-

22520/7-01 standard.

male female

DCE Positioners ø 0.5-0.7-0.9-1.3 mm 2)

Note: these turrets can be used with manual crimping

tool according to MIL-C-22520/1-01 standard.

DCE Turret for ø 1.6-2.0-3.0-4.0 mm 2)

male female

Note: each insulator can be used both for crimp con-

tacts of normal shape (fig. 1) or with reduced crimp

barrel (fig. 2).

FGG-EGG Insulators

DCF Automatic extraction tools

FGG EGG

Note: (not valid for FAl and FWl models)

ø A ø C

Fig. 1

ø A ø C

Fig. 2

FGG

EGG

FGG

EGG

Note: a wide variation of strand number and diameter

combinations are quoted as being AWG, some of which

do not have a large enough cross section to guarantee

a crimp as per either MIL-C-22520/1-01 or /7-01.

FGG-EGG Crimp contacts

®®

132 www.lemo.com

Pneumatic crimping tools

1) According to specification MIL-C-22520/7-01.

2) According to specification MIL-C-22520/1-01.

Manual crimping tools

Fig. A

Fig. B

Crimping tools for electrical contacts

LEMO

DANIELS

ASTRO

Supplier

DPC.91.701.V1) DPC.91.101.A2) DPC.91.102.V

MH8601) AF82) M300BT

6163361) 6157082) –

Part number

contact ø 0.5-0.7 contact ø 1.6-2.0 contact ø 3.0-4.0

0.9-1.3 (Fig. A) (Fig. B) (Fig. B)

According to specification MIL-C-22520/7-01.

For LEMO contacts ø 0.5-0.7-0.9-1.3 mm

LEMO

BALMAR

BUCHANAN

SupplierPart number

DPC.91.701.C

85230

621101

0B-0K

to

3B-3K

Series

Note:

extractor for FAl of the 4B/4K and 5B/5K still need to be determinated.

DCF Automatic extraction tools for crimp contacts (for FAl and FWl models)

Contact

ø A

(mm)

DCF.92.162.3LT

DCF.92.131.3LT

DCF.92.090.3LT

DCF.92.070.3LT

1.6

1.3

0.9

0.7

Extractors part

number for male

and female contacts

133www.lemo.com

®®

Spare parts

ø C L

ø A

Note: sockets of series 5B and 5S are always supplied with a tapered

washer. To order this accessory separately, use the above part numbers.

The panel cut out diameters are larger when using tapered washer.

ø C L

ø A

Note: to order this accessory separately, use the above part numbers.

l Material: Nickel-plated bronze (3 µm)

l Material: Nickel-plated brass (3 µm)

GBA Locking washers

00-TT

0S-0B-0T

1S-1B-1T

XB

1E-1K

2S-2B-2T

3S-3B-3T

4S-4B

Series

GBA.00.250.FN

GBA.0S.250.FN

GBA.1S.250.FN

GBA.0E.250.FN

GBA.1E.250.FN

GBA.2S.250.FN

GBA.3S.250.FN

GBA.4S.250.FN

Part number

9.5 7.1 1.0

12.5 9.1 1.0

16.0 12.1 1.0

19.6 14.1 1.2

21.8 16.1 1.2

19.5 15.1 1.2

25.0 18.1 1.4

32.0 25.1 1.4

Dimensions (mm)

A C L

GBB Tapered washers

00

0S-0B

1S-1B

2S-2B

3S-3B

4S-4B

5S-5B

Series

GBB.00.250.LN

GBB.0S.250.LN

GBB.1S.250.LN

GBB.2S.250.LN

GBB.3S.250.LN

GBB.4S.250.LN

GBB.5S.250.LN

Part number

9 7.1 2.0

11 9.1 2.5

15 12.1 3.5

18 15.1 4.0

22 18.1 4.5

28 25.2 5.0

40 35.2 7.5

Dimensions (mm)

A C L

e

ø A

ø B

L

ø B

L

e

ø A

l Material: Chrome-plated brass (Ni 3 µm + Cr 0.3 µm)

Model 2

Model 1

Note: 00, TT, 0B, 0T, 0S, 1B, 1T, 1S, 2B, 2T and 2S series fixed and

free sockets for back panel mounting are always delivered with this notched

nut. To order this accessory separately, use the above part numbers.

GEG Notched nut

1

2

1

2

Model

GEG.00.240.LC

GEG.0S.240.LC

GEG.0E.240.LC

GEG.1S.240.LC

GEG.1E.240.LC

GEG.1S.242.LC

GEG.2S.240.LC

GEG.2S.241.LC

GEG.2E.240.LC

Part number

8.6 10 M7 x 0.5 2.5

10.5 12 M9 x 0.6 2.5

15.8 18 M14 x 1.0 3.5

14.0 16 M12 x 1.0 3.5

17.5 20 M16 x 1.0 3.5

12.1 14 M11 x 0.5 3.5

17.5 20 M15 x 1.0 3.5

20.5 24 M19 x 1.0 3.5

22.5 25 M20 x 1.0 3.5

Dimensions (mm)

A B e L

®®

134 www.lemo.com

eL

A

øB

Note: to order this part separately, use the above part numbers. The last letters «LN» of the part number refer to the nut material and treatment. If a nut

in aluminium alloy or stainless steel is desired, replace the last letters of the part number by «PT» or «AZ» respectively.

l Material: Nickel-plated brass (3 µm), natural anodized aluminium alloy,

stainless steel

GEA Hexagonal nuts

00-TT

0S-0B-0T

0S-0B

0E-0K

1S-1B-XB

1S-1B-1T

1B

1E-1K

2S-2B

2S-2B-2T

2E-2K

3S-3B-3T

3E-3K

4S-4B

4E-4K

Series

GEA.00.240.LN

GEA.0S.240.LN

GEA.0S.241.LN

GEA.0E.240.LN

GEA.1S.240.LN

GEA.1S.241.LN

GEA.1E.240.LN

GEA.2S.240.LN

GEA.2E.240.LN

GEA.3S.240.LN

GEA.3E.240.LN

GEA.4S.240.LN

GEA.4E.240.LN

Part number

9 10.2 M7 x 0.50 2.0

11 12.4 M9 x 0.60 2.0

12 13.8 M10 x 0.75 2.5

17 19.2 M14 x 1.00 2.5

14 15.8 M12 x 1.00 2.5

13 14.8 M11 x 0.50 2.5

19 21.5 M16 x 1.00 3.0

17 19.2 M15 x 1.00 2.7

24 27.0 M20 x 1.00 4.0

22 25.0 M18 x 1.00 3.0

30 34.0 M24 x 1.00 5.0

30 34.0 M25 x 1.00 5.0

36 40.5 M30 x 1.00 7.0

Dimensions (mm)

A B e L

eL

ø B

A

Note: 3B, 3K, 3T, 3S, 3E, 4B, 4K, 4S, 4E, 5B, 5K, 5S, 5E, 6S and 6E series

fixed and free sockets for back panel mounting are always delivered with

a conical nut. To order this accessory separately, use the part numbers

in the adjacent table.

l Material: Chrome-plated brass (Ni 3 µm + Cr 0.3 µm)

GEC Conical nuts

GEC.00.240.LC

GEC.0S.240.LC

GEC.0E.240.LC

GEC.1S.240.LC

GEC.1S.241.LC

GEC.1S.242.LC

GEC.2S.240.LC

GEC.2S.241.LC

GEC.2E.240.LC

GEC.3S.240.LC

GEC.3E.240.LC

GEC.4S.240.LC

GEC.4K.241.LC

GEC.5S.240.LC

Part number

8 10.0 M7 x 0.5 2.5

10 12.0 M9 x 0.6 2.5

16 18.0 M14 x 1.0 3.0

13 16.0 M12 x 1.0 3.2

17 20.0 M16 x 1.0 4.0

12 14.0 M11 x 0.5 3.2

17 20.0 M15 x 1.0 3.8

20 24.0 M19 x 1.0 5.8

22 25.0 M20 x 1.0 5.0

20 24.0 M18 x 1.0 4.5

27 30.0 M24 x 1.0 4.5

27 30.0 M25 x 1.0 4.5

32 35.5 M30 x 1.0 5.0

37 41.0 M35 x 1.0 5.0

Dimensions (mm)

A B e L

135www.lemo.com

®®

eL

ø A

Note: 5B, 5K, 5S, 5E, 6S and 6E series sockets are always supplied with

model 2 round nuts. To order this accessory separately, use the part

numbers in the adjacent table.

eL

ø A

Model 1

Model 2

l Material: Nickel-plated brass (3 µm)

GEB Round nuts

1

2

Model

GEB.00.240.LN

GEB.0S.240.LN

GEB.0E.240.LN

GEB.1S.240.LN

GEB.1E.240.LN

GEB.2S.240.LN

GEB.2B.240.LN

GEB.3S.240.LN

GEB.4S.240.LN

GEB.5S.240.LN

GEB.5E.240.LN

GEB.6S.241.LN

GEB.6E.240.LN

Part number

9.0 M7 x 0.50 4.0

11.0 M9 x 0.60 4.0

18.0 M14 x 1.00 5.0

14.0 M12 x 1.00 5.0

20.0 M16 x 1.00 5.0

18.0 M15 x 1.00 5.5

17.5 M15 x 0.75 2.5

22.0 M18 x 1.00 5.5

28.0 M25 x 1.00 6.0

40.0 M35 x 1.00 8.0

54.0 M45 x 1.50 8.0

54.0 M48 x 1.50 8.0

65.0 M55 x 2.00 9.0

Dimensions (mm)

A e L

136 www.lemo.com

®®

ACCESSORIES

TOOLING

®®

B

L

ø A

N

Note: 1) the tolerance on this dimension is ± 5 mm.

This cap is available only with an alignment key (G). Upon request this

cap can be supplied in black and the last letter «G» of the part number

should be replaced with «N».

Fitting the cord

Slide the plug into the loop of the cord.

Place the loop into the groove in front of the collet nut and

tighten the loop.

l Body material: Polyoxymethylene (POM) grey (or black)

l Cord material: Polyamide 6, grey (or black)

l Gasket material: Silicone rubber

l Maximum operating temperature: 100°C

l Watertightness: IP51 according to IEC 60529

L

B

sliding loop

ø A

N

l Body material: Nickel-plated brass (Ni 3µm)

l Lanyard material: Stainless steel

l Crimp ferrule material: Nickel-plated brass + polyolefin

l O-ring material: Silicone rubber or FPM

l Maximum operating temperature: 135°C

l Watertightness: IP68 according to IEC 60529 for E series

Note: 1) the tolerance on this dimension is ± 5 mm.

The last letter «S» of the part number stands for the material of the O-ring

(silicone rubber). O-ring’s made from FPM are also available; if required,

replace the letter «S» by «V».

138 www.lemo.com

Accessories

BFG Plug caps

00

0S-0B

1S-1B

2S-2B

3S-3B

Series

BFG.00.100.PCSG

BFG.0B.100.PCZG

BFG.1B.100.PCZG

BFG.2B.100.PCSG

BFG.3B.100.PCSG

Part number

7.5 9.8 10.0 60

9.5 12.0 12.2 85

12.0 15.0 13.8 85

15.0 18.0 15.0 85

18.5 22.0 18.5 95

Dimensions (mm)

A B L N1)

BFA Plug caps

0E

1E

2E

3E

4E

4S

5E

5S

6S

Series

BFA.0E.100.NAS

BFA.1E.100.NAS

BFA.2E.100.NAS

BFA.3E.100.NAS

BFA.4E.100.NAS

BFA.4S.100.NAS

BFA.5E.100.NAS

BFA.5S.100.NAS

BFA.6S.100.NAS

Part number

14.0 6 12.5 85

16.0 6 15.5 85

19.5 6 17.5 85

23.0 6 22.0 120

29.0 10 22.5 120

25.0 10 22.2 120

44.0 10 27.0 150

36.0 10 30.2 150

46.0 10 33.0 150

Dimensions (mm)

A B L N1)

®®

26 31 155

139www.lemo.com

L

B

ø A

N

ø 3.5

l Body material: Nickel-plated brass (Ni 3µm)

l Lanyard material: Stainless steel

l Crimp ferrule material: Nickel-plated brass + polyolefin

l O-ring material: Silicone rubber or FPM

l Maximum operating temperature: 135°C

l Watertightness: IP68 according to IEC 60529 for E and K series

Note: 1) the tolerance on this dimension is ± 5 mm.

This cap is available only with an alignment key (G). The last letter «S»

of the part number stands for the material of the O-ring (silicone rubber).

O-ring’s made from FPM are also available; if required, replace the letter

«S» by «V».

L

B

sliding loop

ø A

N

l Body material: Nickel-plated brass (Ni 3µm)

l Lanyard material: Stainless steel

l Crimp ferrule material: Nickel-plated brass + polyolefin

l O-ring material: Silicone rubber or FPM

l Maximum operating temperature: 135°C

l Watertightness: IP68 according to IEC 60529 for E and K series

Note: 1) the tolerance on this dimension is ± 5 mm.

This cap is available only with an alignment key (G). The last letter «S»

of the part number stands for the material of the O-ring (silicone rubber).

O-ring’s made from FPM are also available; if required, replace the letter

«S» by «V».

BFG Plug caps with key (G)

0K

1K

2K

3K

4B

4K

5B

5K

6E

Series

BFG.0K.100.NAS

BFG.1K.100.NAS

BFG.2K.100.NAS

BFG.3K.100.NAS

BFG.4B.100.NAS

BFG.4K.100.NAS

BFG.5B.100.NAS

BFG.5K.100.NAS

BFG.6E.100.NAS

Part number

14.0 6 12.5 85

16.0 6 15.5 85

19.5 6 17.5 85

23.0 6 22.0 120

25.0 10 20.2 120

29.0 10 22.5 120

36.0 10 27.2 150

44.0 10 27.0 150

54.0 10 31.0 150

Dimensions (mm)

A B L N1)

BHG Plug caps, nut fixing or flange

0K

1K

2K

3K

4B

4K

5B

5K

6E

Series

BHG.0K.100.NAS

BHG.1K.100.NAS

BHG.2K.100.NAS

BHG.3K.100.NAS

BHG.4B.100.NAS

BHG.4K.100.NAS

BHG.5B.100.NAS

BHG.5K.100.NAS

BHG.6E.100.NAS

Part number

14.0 6 12.5 85

16.0 6 15.5 85

19.5 6 17.5 85

23.0 6 22.0 120

25.0 10 20.2 120

29.0 10 22.5 120

36.0 10 27.2 150

44.0 10 27.0 150

54.0 10 31.0 150

Dimensions (mm)

A B L N1)

ø A

L

N

l Material: black ALCRYN®

l Lanyard material: Stainless steel

l Crimp ferrule material: Stainless steel AISI 304 + polyolefin

Note: 1) the tolerance on this dimension is ± 5 mm.

These caps are suitable for use with any alignment key configuration.

BFG Plug cap

3K

Series

BFG.3K.100.EAN

Part number

Dimensions (mm)

A L N1)

®®

140 www.lemo.com

ø A

L

N

ø 3.2

l Material: black ALCRYN®

l Lanyard material: Stainless steel

l Crimp ferrule material: Stainless steel AISI 304 + polyolefin

Note: 1) the tolerance on this dimension is ± 5 mm.

These caps are suitable for use with any alignment key configuration.

L

M

B

ø A

N

ø 3.5

Note: 1) the tolerance on this dimension is ± 5 mm.

These caps are suitable for use with any alignment key configuration. On

request this cap can be supplied in black. If so, replace the last letter «G»

of the part number by «N».

l Body material: Polyoxymethylene (POM) grey (or black)

l Cord material: Polyamide 6, grey (or black)

l Gasket material: Silicone rubber

l Maximum operating temperature: 100°C

l Watertightness: IP61 according to IEC 60529

26 31 120

BHA Plug cap

3K

Series

BHA.3K.100.EAN

Part number

Dimensions (mm)

A L N1)

BRA Blanking caps for fixed sockets and free straight sockets

00

0S-0B

1S-1B

2S-2B

3S-3B

Series

BRA.00.200.PCSG

BRA.0B.200.PCSG

BRA.1B.200.PCSG

BRA.2B.200.PCSG

BRA.3B.200.PCSG

Part number

7.5 9.8 9.0 3.5 60

10.0 12.5 11.0 4.8 60

14.0 17.0 13.5 5.6 60

18.0 21.0 14.5 6.0 60

22.0 25.5 17.0 7.0 60

Dimensions (mm)

A B L M N1)

Note: 1) the tolerance on this dimension is ± 5 mm.

These caps are suitable for use with any alignment key configuration. The

last letter «S» of the part number stands for the O-ring material (silicone

rubber). O-ring’s made from FPM are also available; if required, replace

the letter «S» by «V».

l Body material: Nickel-plated brass (Ni 3 µm)

l Lanyard material: Stainless steel

l Crimp ferrule material: Nickel-plated brass + polyolefin

l O-ring material: Silicone rubber or FPM

l Maximum operating temperature: 135°C

l Watertightness: IP61 according to IEC 60529 for S series

ø A

M

N

B

ø 3.5

L

BRE Blanking caps for fixed sockets

8 7.5 8.8 3.5 60

10 9.5 10.5 4.5 85

14 11.0 12.5 5.0 85

18 12.0 14.0 6.0 85

22 14.0 18.0 8.0 120

28 20.0 23.0 10.0 120

40 22.0 30.0 12.0 150

54 22.0 30.0 12.0 150

57 24.0 31.5 14.0 150

Dimensions (mm)

A B L M N1)

00

0S-0B

1S-1B

2S-2B

3S-3B

4S-4B

5S-5B

6S

6E

Series

BRE.00.200.NAS

BRE.0S.200.NAS

BRE.1S.200.NAS

BRE.2S.200.NAS

BRE.3S.200.NAS

BRE.4S.200.NAS

BRE.5S.200.NAS

BRE.6S.200.NAS

BRE.6E.200.NAS

Part number

®®

141www.lemo.com

Note: 1) the tolerance on this dimension is ± 5 mm.

These caps are suitable for use with any alignment key configuration. The

last letter «S» of the part number stands for the O-ring material (silicone

rubber). O-ring’s made from FPM are also available; if required, replace

the letter «S» by «V».

l Body material: Nickel-plated brass (Ni 3 µm)

l Lanyard material: Stainless steel

l Crimp ferrule material: Nickel-plated brass + polyolefin

l O-ring material: Silicone rubber or FPM

l Maximum operating temperature: 135°C

l Watertightness: IP68 according to IEC 60529

B

ø A

M

ø 3.5

L

N

BRE Blanking caps for fixed sockets

15.0 10 15.0 4 85

17.0 12 20.0 6 85

20.5 14 24.0 8 85

24.0 14 28.0 8 120

30.0 20 30.5 10 120

44.0 22 37.0 12 150

Dimensions (mm)

A B L M N1)

0K-0E

1K-1E

2K-2E

3K-3E

4K-4E

5K-5E

Series

BRE.0K.200.NAS

BRE.1K.200.NAS

BRE.2K.200.NAS

BRE.3K.200.NAS

BRE.4K.200.NAS

BRE.5K.200.NAS

Part number

ø A

L

M

N

ø 3.2

l Material: black ALCRYN®

l Lanyard material: Stainless steel

l Crimp ferrule material: Stainless steel AISI 304 + polyolefin

Note: 1) the tolerance on this dimension is ± 5 mm.

These caps are suitable for use with any alignment key configuration.

ø A

L

M

N

l Material: black ALCRYN®

l Lanyard material: Stainless steel

l Crimp ferrule material: Stainless steel AISI 304 + polyolefin

Note: 1) the tolerance on this dimension is ± 5 mm.

These caps are suitable for use with any alignment key configuration.

BRA Blanking caps for fixed sockets

3K

4K

Series

BRA.3K.200.EAN

BRA.4K.200.EAN

Part number

26 27 14.5 120

31 31 17.0 120

Dimensions (mm)

A L M N1)

BRF Blanking caps for free sockets

3K

Series

BRF.3K.200.EAN

Part number

26 27 14.5 155

Dimensions (mm)

A L M N1)

®®

142 www.lemo.com

L

M

B

ø A

N

Fitting the cord

Slide the socket into the loop of the cord.

Place the loop into the groove in front of the collet nut.

Tighten the loop.

Note: 1) the tolerance on this dimension is ± 5 mm.

On request this cap is available in black. If required, replace the last letter

«G» of the part number by «N».

l Body material: Polyoxymethylene (POM) grey (or black)

l Cord material: Polyamide 6, grey (or black)

l Gasket material: Silicone rubber

l Maximum operating temperature: 100°C

l Watertightness: IP61 according to IEC 60529

Note: 1) the tolerance on this dimension is ± 5 mm.

These caps are suitable for use with any alignment key configuration. The

last letter «S» of the part number stands for the O-ring material (silicone

rubber). O-ring’s made from FPM are also available; if required, replace

the letter «S» by «V».

l Body material: Nickel-plated brass (Ni 3 µm)

l Lanyard material: Stainless steel

l Crimp ferrule material: Nickel-plated brass + polyolefin

l O-ring material: Silicone rubber or FPM

l Maximum operating temperature: 135°C

l Watertightness: IP61 according to IEC 60529 for S series

ø A

M

sliding loop

B

L

N

BRD Blanking caps for free sockets

00

0S-0B

1S-1B

2S-2B

3S-3B

Series

BRD.00.200.PCSG

BRD.0B.200.PCSG

BRD.1B.200.PCSG

BRD.2B.200.PCSG

BRD.3B.200.PCSG

Part number

7.5 9.8 9.0 3.5 85

10.0 12.5 11.0 4.8 85

14.0 17.0 13.5 5.6 85

18.0 21.0 14.5 6.0 85

22.0 25.5 17.0 7.0 95

Dimensions (mm)

A B L M N1)

BRF Blanking caps for free sockets

8 7.5 8.8 3.5 85

10 9.5 10.5 4.5 85

14 11.0 12.5 5.0 85

18 12.0 14.0 6.0 85

22 14.0 18.0 8.0 120

28 20.0 23.0 10.0 120

40 22.0 30.0 12.0 150

54 22.0 30.0 12.0 150

Dimensions (mm)

A B L M N1)

00

0S-0B

1S-1B

2S-2B

3S-3B

4S-4B

5S-5B

6S

Series

BRF.00.200.NAS

BRF.0S.200.NAS

BRF.1S.200.NAS

BRF.2S.200.NAS

BRF.3S.200.NAS

BRF.4S.200.NAS

BRF.5S.200.NAS

BRF.6S.200.NAS

Part number

®®

143www.lemo.com

ø A

N

B

M

L

sliding loop

Note: 1) the tolerance on this dimension is ± 5 mm.

These caps are suitable for use with any alignment key configuration. The

last letter «S» of the part number stands for the O-ring material (silicone

rubber). O-ring’s made from FPM are also available; if required, replace

the letter «S» by «V».

l Body material: Nickel-plated brass (Ni 3 µm)

l Lanyard material: Stainless steel

l Crimp ferrule material: Nickel-plated brass + polyolefin

l O-ring material: Silicone rubber or FPM

l Maximum operating temperature: 135°C

l Watertightness: IP68 according to IEC 60529

BRF Blanking caps for free sockets

15.0 10 15.0 4 85

17.0 12 20.0 6 85

20.5 14 24.0 8 85

24.0 14 28.0 8 120

30.0 20 30.5 10 120

44.0 22 37.0 12 150

Dimensions (mm)

A B L M N1)

0K-0E

1K-1E

2K-2E

3K-3E

4K-4E

5K-5E

Series

BRF.0K.200.NAS

BRF.1K.200.NAS

BRF.2K.200.NAS

BRF.3K.200.NAS

BRF.4K.200.NAS

BRF.5K.200.NAS

Part number

M

ø A L

ø C

B

Note: On request, this cap is available in black, blue or white. If so replace

the last letter «G» of the part number by «N», «A» or «B».

E maxi

N

l Body material: PSU

l Gasket material: FKM

l Spring material: Stainless steel

l Axes material: Nickel-plated brass

l Maximum operating temperature: 100°C

l Watertightness: IP61 according to IEC 60529

BRR Spring loaded dust caps for ERA, ERN and EGl sockets or PSA and PKl fixed sockets

11.0 13.3 9.0 5.8 5.0 1.2 15.3

14.2 17.1 12.0 6.0 6.3 1.5 20.3

18.6 22.4 15.2 6.5 8.2 2.0 26.2

22.5 26.5 18.2 9.0 8.8 2.5 30.8

Dimensions (mm)

A B C E L M N

0S-0B

1S-1B

2S-2B

3S-3B

Series

BRR.0S.200.PZVG

BRR.1S.200.PZVG

BRR.2S.200.PZVG

BRR.3S.200.PZVG

Part number

M

ø A L

ø C

B

N

l Cap material: Polyoxymethylene (POM) grey

l Body material: Nickel-plated brass

l Gasket material: Silicone rubber

l Spring material: Stainless steel

l Axes material: Nickel-plated brass

l Maximum operating temperature: 100°C

l Watertightness: IP61 according to IEC 60529

Note: Use Allen key (0.9 mm flat) to secure cap on connector.

BRR Spring loaded dust cap for EDl and EBl fixed sockets

29 29 23 8.1 3 33.2

Dimensions (mm)

A B C L M N

3K

Series

BRR.3K.200.PZSG

Part number

®®

144 www.lemo.com

N

ø A

L

B

sliding loop

BFG Blanking caps for plugs (T series)

7.0 4.3 9.0 60

9.5 5.0 11.0 85

12.0 6.3 12.4 85

15.0 6.4 13.8 85

18.8 6.4 17.6 120

Dimensions (mm)

A B L N1)

N

ø 3.5

ø A

L

B

BHG Blanking caps for fixed plugs (T series)

l Body material: Chrome-plated brass (Ni 3 µm)

l Lanyard material: Stainless steel

l Crimp ferrule material: Nickel-plated brass + polyolefin

l O-ring material: Silicone

l Maximum operating temperature: 135°C

l Watertightness: IP68 according to IEC 60529

BFG.TT.100.CAS

BFG.0T.100.CAS

BFG.1T.100.CAS

BFG.2T.100.CAS

BFG.3T.100.CAS

Part number

BHG.TT.100.CAS

BHG.0T.100.CAS

BHG.1T.100.CAS

BHG.2T.100.CAS

BHG.3T.100.CAS

Part number

N

ø 3.5

ø A

L

M

B

BRE Blanking caps for sockets (T series)

N

ø A

L

M

B

sliding loop

BRF Blanking caps for free sockets (T series)

7.0 4.3 10.4 2.4 60

9.5 5.0 13.2 3.2 85

12.0 6.3 15.1 4.2 85

15.0 6.4 17.1 5.2 85

18.8 6.4 21.2 6.4 120

Dimensions (mm)

A B L M N1)

l Body material: Chrome-plated brass (Ni 3 µm)

l Lanyard material: Stainless steel

l Crimp ferrule material: Nickel-plated brass + polyolefin

l Maximum operating temperature: 135°C

l Watertightness: IP68 according to IEC 60529

BRF.TT.200.CAZ

BRF.0T.200.CAZ

BRF.1T.200.CAZ

BRF.2T.200.CAZ

BRF.3T.200.CAZ

Part number

BRE.TT.200.CAZ

BRE.0T.200.CAZ

BRE.1T.200.CAZ

BRE.2T.200.CAZ

BRE.3T.200.CAZ

Part number

Note: 1) the tolerance on this dimension is ± 5 mm.

145www.lemo.com

®

A bend relief made from thermoplastic polyurethane elas-

tomer can be fitted over LEMO plugs and sockets that are

supplied with nut for fitting such bend relief.

They are available in nine different colours match with the

GRA insulating washers (see page 149).

Use the part numbers shown below to order this accessory

separately.

Note: 1) Design may differ from other bend relief, model without stripes. The «GMD» are thin bend reliefs (for very flexible cables).

The last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page 146

and replace the letter «G» by the letter of the required colour. See also detailed information for each series: B series on page 71; K series on page 71;

T series on page 71; S series on page 121; E series on page 121.

L

ø A

Main characteristics

lMaterial: TPU (Thermoplastic Polyurethane)

lTemperature range in dry atmosphere: -40°C +80°C

1.2 22 1.1 1.4

1.8 22 1.8 2.1

2.5 22 2.5 2.8

2.8 22 2.8 3.1

3.2 22 3.2 3.5

2.5 22 2.5 2.8

2.8 22 2.8 3.1

3.2 22 3.2 3.5

GMA.00.012.DG 1)

GMA.00.018.DG 1)

GMB.00.025.DG 1)

GMB.00.028.DG 1)

GMB.00.032.DG 1)

GMD.00.025.DG 1)

GMD.00.028.DG 1)

GMD.00.032.DG 1)

Bend relief Cable ø

A L min. max.

4.0 36 4.0 4.5

4.5 36 4.5 5.0

5.0 36 5.0 5.5

6.0 36 6.0 6.5

7.0 36 7.0 7.7

7.8 36 7.8 8.8

GMA.2B.040.DG

GMA.2B.045.DG

GMA.2B.050.DG

GMA.2B.060.DG

GMA.2B.070.DG

GMA.2B.080.DG 1)

4.5 42 4.5 5.2

6.0 42 6.0 6.9

7.0 42 7.0 7.9

8.0 42 8.0 8.9

9.0 42 9.0 10.0

GMA.3B.050.DG 1)

GMA.3B.060.DG

GMA.3B.070.DG

GMA.3B.080.DG

GMA.3B.090.DG

Part number

Bend relief Cable ø

A L min. max.

Part number

Note: all dimensions are in millimetres.

2.5 24 2.5 2.9

3.0 24 3.0 3.4

3.5 24 3.5 3.9

4.0 24 4.0 4.4

4.5 24 4.5 5.2

GMA.0B.025.DG

GMA.0B.030.DG

GMA.0B.035.DG

GMA.0B.040.DG 1)

GMA.0B.045.DG 1)

2.5 30 2.5 2.9

3.0 30 3.0 3.4

3.5 30 3.5 3.9

4.0 30 4.0 4.4

4.5 30 4.5 4.9

5.4 30 5.4 6.0

6.5 30 6.5 7.0

GMA.1B.025.DG

GMA.1B.030.DG

GMA.1B.035.DG

GMA.1B.040.DG

GMA.1B.045.DG

GMA.1B.054.DG

GMA.1B.065.DG 1)

GMlBend relief (TPU)

Series Series

8.0 60 8.0 9.0

10.0 60 10.0 10.9

11.0 60 11.0 11.9

12.0 60 12.0 13.0

13.5 60 13.5 14.5

GMA.4B.080.DG 1)

GMA.4B.010.DG 1)

GMA.4B.011.DG 1)

GMA.4B.012.DG 1)

GMA.4B.013.DG 1)

00-TT

1B-XB

1S

1E-1K-1T

0B

0S

0E-0K-0T

2B

2S

2E-2K-2T

3S

3B

3E-3K-3T

4S

4B

4E-4K

5E-5K

®®

146 www.lemo.com

Note: the selection of pigments, which should remain

stable at high temperature, is limited by the new regu-

lations. For this reason, some colours will be a shade

different from those used for Desmopan bend reliefs. The

selected solutions represent the best possible compromise.

A bend relief has been designed for connectors used in

applications at high temperature or requiring vapour ster-

ilization.

These bend reliefs are different from previous ones as for

their material, a silicone elastomer which is noted for its

retention of flexibility over a wide temperature range. They

are available in nine colours.

Use the part numbers shown below to order this accessory

separately.

Main characteristics

lMaterial: Silicone elastomer VMQ

lTemperature range in dry atmosphere: -60°C +200°C

lTemperature range in water steam: +140°C

Note: The last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page

146 and replace the letter «G» by the letter of the required colour. See also detailed information for each series: B series on page 71; K series on page

71; T series on page 71; S series on page 121; E series on page 121.

blue

white

grey

A

B

G

Colour

Ref.

yellow

brown

black

J

M

N

Colour

Ref.

red

orange

green

R

S

V

Colour

Ref.

L

ø A

Bend relief Cable ø

A L min. max.

4.0 41 4.0 4.4

4.5 41 4.5 5.0

5.1 41 5.1 5.6

5.7 41 5.7 6.2

6.3 41 6.3 7.0

7.1 41 7.1 7.9

8.0 41 8.0 9.0

GMA.2B.040.RG

GMA.2B.045.RG

GMA.2B.051.RG

GMA.2B.057.RG

GMA.2B.063.RG

GMA.2B.071.RG

GMA.2B.080.RG

Part number

Bend relief Cable ø

A L min. max.

Part number

1.7 27 1.7 2.4

2.5 27 2.5 2.9

3.0 27 3.0 3.4

3.5 27 3.5 3.9

4.0 27 4.0 4.4

4.5 27 4.5 5.2

GMA.0B.018.RG

GMA.0B.025.RG

GMA.0B.030.RG

GMA.0B.035.RG

GMA.0B.040.RG

GMA.0B.045.RG

2.5 34 2.5 2.9

3.0 34 3.0 3.4

3.5 34 3.5 3.9

4.0 34 4.0 4.4

4.5 34 4.5 5.0

5.1 34 5.1 5.6

5.7 34 5.7 6.2

6.3 34 6.3 7.0

GMA.1B.025.RG

GMA.1B.030.RG

GMA.1B.035.RG

GMA.1B.040.RG

GMA.1B.045.RG

GMA.1B.051.RG

GMA.1B.057.RG

GMA.1B.063.RG

GMA Bend relief (Silicone)

Series Series

1B

1S

1E-1K-1T

0B

0S

0E-0K-0T

2B

2S

2E-2K-2T

147www.lemo.com

®®

L

ø A

lMaterial: Elastomer rubber black colour

lOperating temperature: -30°C to +120°C

L

ø A

Overall bend reliefs, type GMF for plugs and GMP for sockets offer optimum protection against mechanical damage and

give a protection index of IP65 according to IEC 60529 (mated position). These bend reliefs slide easily over the connector

shell and are positioned by slightly pressing the bend relief backnut.

The special design of the bend relief for plug provides for easy use of the push-pull self-latching system.

– The overall bend relief shall be installed over plug or free socket fitted with a nut for bend relief.

– The typical applications are shown below.

– The overall bend relief can be cut at different length depending on cable diameter.

Plug-free socket

Plug-fixed socket

Optimum protection is offered only when using

front panel mounting fixed sockets

PCA FFA S series

PHG FGG B series

ERA FFA S series

EGG FGG B series

GMlOverall bend relief for plugs and sockets

11.0 60.5 1.0 3.5

16.0 72.0 2.5 6.2

22.0 95.0 5.0 8.2

GMF.0B.035.060EN

GMF.1B.062.072EN

GMF.2B.082.095EN

Bend relief Cable ø

A L min. max.

Part number

GMF Bend relief for straight plug

0S-0B

1S-1B

2S-2B

Series

lMaterial: Elastomer rubber black colour

lOperating temperature: -30°C to +120°C

11.0 69.0 1.0 3.5

16.0 80.0 2.5 6.2

21.0 102.5 5.0 8.2

GMP.0B.035.069EN

GMP.1B.062.079EN

GMP.2B.082.102EN

Bend relief Cable ø

A L min. max.

Part number

GMP Bend relief for free socket

0S-0B

1S-1B

2S-2B

Series

148 www.lemo.com

®®

ø 31

ø

35

ø 31

131

160

BA C DE

ø 31

17

ø 35

156

160

ø

BA C D E

lMaterial: Black EPDM

– 8.0 8.9

A 9.0 9.9

B 10.0 11.4

C 11.5 12.9

D 13.0 14.9

E 15.0 16.5

GMF.4K.080.EANZ

admissible ø (mm)

min. max.

Part number

GMF Bend relief with cap for plug

Series

4E

4K

For

models

FFA

FGG

Cut

lMaterial: Black EPDM

– 8.0 8.9

A 9.0 9.9

B 10.0 11.4

C 11.5 12.9

D 13.0 14.9

E 15.0 16.5

GMP.4K.080.EANZ

admissible ø (mm)

min. max.

Part number

GMP Bend relief with cap for free socket

Series

4E

4K

For

models

PCA

PHG

Cut

M

~L

S 1 S 2

E maxi

S 3

e

ø B

ø A

Note: ll = collet cable diameter of the B series. For cable diameter refer

to page 67. Other surface treatment available.

The cable collet system stands for both screened and unscreened cables.

It can be delivered with a nut for fitting a bend relief it you add a «Z» at

the end of the part number.

6.5 8.1 M5x0.5 1.5 16 4.0 5 6 7

12.0 12.5 M9x0.6 5.0 26 7.5 11 9 11

17.0 19.5 M15x1.0 8.1 30 12.0 – 14 17

Dimensions (mm)

A B e E L M S1 S2 S3

GSC Lead-through with cable collet

GSC.00.290.CDll

GSC.1S.290.NDll

GSC.3S.290.NDll

Part number

149www.lemo.com

®®

E maxi

S

M

ø A

L

ø B

T

l Material: Polyamide

l Maximum operating temperature: 90° C

Note: the last letter «G» of the part number indicates the colour grey for

the insulating washer. To obtain an insulating washer of another colour,

refer to the table above and change the letter «G» of the part number to

the corresponding letter of the colour required. For the panel cut-out,

please consult chapter «Panel cut-out» on page 158.

Sockets or plugs mounted on panels can be fitted with insulating washers. The nine colours available combined with those

for the bend reliefs makes colour coding possible.

Note: insulating washers for series 5B are available on request.

Caution: these insulating washers can be used with fixed and free sockets

with across flat dimension S1 equivalent to the S dimension of the washer.

GRA Insulating washers

10.0 8.8 4.5 1.8 1.0 6.4 8.0

12.0 10.8 6.0 1.8 1.0 8.3 9.9

16.0 13.8 6.5 1.8 1.0 10.6 12.2

21.1 17.9 7.3 2.3 1.3 13.6 16.2

25.0 21.8 10.3 2.2 1.2 16.7 20.2

31.9 28.7 10.5 2.5 1.5 23.6 27.1

Dimensions (mm)

A B E L M S T

00

0S-0B

1S-1B

2S-2B

3S-3B

4S-4B

Series

GRA.00.269.GG

GRA.0S.269.GG

GRA.1S.269.GG

GRA.2S.269.GG

GRA.3S.269.GG

GRA.4S.269.GG

Part number

blue

white

grey

A

B

G

ColourRef.

yellow

brown

black

J

M

N

ColourRef.

red

orange

green

R

S

V

ColourRef.

l Material: CuSnZn plated brass (2 µm)

GCA Earthing washer

00-TT

0S-0B-0T

0E-0K

1S-1B-1T

1E-1K

2S-2B-2T

2E-2K

3S-3B-3T

4S-4B

4E-4K

5S-5B

Series

GCA.00.255.LT

GCA.0S.255.LT

GCA.0E.255.LT

GCA.1S.255.LT

GCA.1E.255.LT

GCA.2S.255.LT

GCA.2E.255.LT

GCA.3S.255.LT

GCA.4S.255.LT

GCA.4E.255.LT

GCA.5S.255.LT

Part number

9.5 7.1 0.4 18.2

13.0 9.1 0.4 22.0

17.0 14.1 0.5 27.5

17.0 12.2 0.5 27.5

20.0 16.2 0.5 32.0

20.0 15.2 0.5 32.0

25.0 20.2 0.5 39.0

25.0 18.2 0.5 39.0

35.0 25.6 0.6 50.0

35.0 30.6 0.6 50.0

42.0 35.1 0.3 57.5

Dimensions (mm)

A B L N

ø A

L

N

ø B

150 www.lemo.com

®®

M

ø B

N

H

R

L

S

E maxi

l Material: Polyamide

l Maximum operating temperature: 90° C

Note: the last letter «G» of the washer’s part number indicates the colour

grey. For other colours, refer to the above table and replace letter «G»

by the one corresponding to the colour required. For the panel cut-out,

please consult chapter «Panel cut-out» on page 158.

Double panel washers have been designed to make the drilling of panel holes easier for mounting fixed and free sockets.

The combination of the nine different colours of the double panel washers and of the bend reliefs makes colour coding

possible.

Caution: these double panel washers can be used with fixed or free sock-

ets with across flat dimension S1 equivalent to the S dimension of the

washer.

GRC Double panel washers

10.9 5 14 2.5 1.5 26.5 12.5 8.3

13.9 5 20 3.3 1.8 34.5 14.5 10.6

Dimensions (mm)

B E H L M N R S

0S-0B

1S-1B

Series

GRC.0S.260.HG

GRC.1B.260.HG

Part number

blue

white

grey

A

B

G

Colour

Ref.

yellow

brown

black

J

M

N

Colour

Ref.

red

orange

green

R

S

V

Colour

Ref.

151www.lemo.com

®®

N

L

ø B

Tooling

DCG Spanners for hexagonal nuts

N

L

ø B

l Material: blackened steel

DCG.91.149.0TN

DCG.91.161.1TN

DCG.91.201.4TN

DCG.91.231.7TN

DCG.91.282.2TN

Part number

14 40 50

16 45 52

20 52 65

23 62 68

28 76 73

Dimensions (mm)

B L N

GEA.00.240.LN

GEA.0S.240.LN

GEA.1S.240.LN

GEA.2S.240.LN

GEA.3S.240.LN

Part number

of the nut

N

L max

ø B

DCA Spanners for hexagonal nuts with locator for flats on socket thread

l Material: blackened steel

DCA.91.149.0TN

DCA.91.161.1TN

DCA.91.201.4TN

DCA.91.231.7TN

DCA.91.282.2TN

Part number

14 65 50

16 73 52

20 85 65

23 100 68

28 120 73

Dimensions (mm)

B L N

GEA.00.240.LN

GEA.0S.240.LN

GEA.1S.240.LN

GEA.2S.240.LN

GEA.3S.240.LN

Part number

of the nut

DCB Spanners for round nuts

l Material: blackened steel

DCB.91.119.0TN

DCB.91.131.1TN

DCB.91.161.4TN

DCB.91.201.8TN

DCB.91.242.2TN

Part number

11 40 50

13 45 50

16 52 65

20 62 65

24 76 70

Dimensions (mm)

B L N

GEB.00.240.LN

GEB.0S.240.LN

GEB.1S.240.LN

GEB.2S.240.LN

GEB.3S.240.LN

Part number

of the nut

www.lemo.com

®®

10.1 12.8 124 48.3

12.1 14.8 124 49.3

16.1 21.0 124 51.9

20.1 22.8 129 53.5

Dimensions (mm)

A B L N

L

N

ø A

ø B

DCH Spanners for conical nuts

l Material: dark grey polyurethane

DCH.91.101.PN

DCH.91.121.PN

DCH.91.161.PN

DCH.91.201.PN

Part number

GEC.00.240.LC

GEC.0S.240.LC

GEC.1S.240.LC

GEC.2S.240.LC

Part number

of the nut

10.1 12.8 124 48.3

12.1 14.8 124 49.3

18.1 22.8 129 53.1

16.1 21.0 124 51.2

20.1 22.8 129 53.5

14.1 18.6 124 51.2

20.1 22.8 129 53.5

24.1 30.8 134 52.6

25.1 32.8 134 55.5

Dimensions (mm)

A B L N

L

N

ø A

ø B

DCH Spanners for notched nuts

l Material: blue polyurethane

DCH.91.101.PA

DCH.91.121.PA

DCH.91.181.PA

DCH.91.161.PA

DCH.91.201.PA

DCH.91.141.PA

DCH.91.201.PA

DCH.91.241.PA

DCH.91.251.PA

Part number

GEG.00.240.LC

GEG.0S.240.LC

GEG.0E.240.LC

GEG.1S.240.LC

GEG.1E.240.LC

GEG.1S.242.LC

GEG.2S.240.LC

GEG.2S.241.LC

GEG.2E.240.LC

Part number

of the nut

M

L

N

S1

l Material: chrome-plated steel

DCP Flat spanners for collet nut

DCP.99.040.TC

DCP.99.045.TC

DCP.99.050.TC

DCP.99.055.TC

DCP.99.060.TC

Part number

70 0.95 10.5 4.0

70 2.00 10.5 4.5

78 2.00 12.6 5.0

78 2.00 12.6 5.5

78 2.00 12.6 6.0

Dimensions (mm)

L M N S1

152

153www.lemo.com

®®

N

M

L

S1

S2

DCP Set of flat spanners for collet nuts

95 2.5 21 8.1 7.1

95 2.5 25 10.1 9.1

115 3.0 30 13.1 12.1

115 3.0 35 15.1 14.1

130 3.0 44 21.1 20.1

130 3.0 54 31.1 30.1

Dimensions (mm)

L M N S1 S2

DCP.91.001.TN

DCP.91.023.TN

DCP.91.045.TN

Part number

l Material: blackened steel

0B

1B

2B-2K

3B-3K

4B

5B

Series

N

M

L

S1

S2

0

0T0T

1

0T

1T

DCP Set of flat spanners for collet nuts

95 2.5 21 7.55 7.05

95 2.5 25 11.05 9.05

115 3.0 30 14.05 12.05

115 3.0 35 16.05 14.05

Dimensions (mm)

L M N S1 S2

0T

1T

2T

3T

Series

DCP.0T.110.TN

DCP.2T.110.TN

Part number

l Material: blackened steel

NM

L

11.0515.05

12.05

7.05

5.05 9.05

DCP Set of flat spanners for FSlretaining ring & collet nuts

DCP.91.FSG.TN

Part number

l Material: blackened steel

00-0B-1B-2B

Series

72 2 24

Dimensions (mm)

L M N

154 www.lemo.com

®®

ø B N

L

DCL Spanners for assembling plugs with 2 latches

10 45 13.5

12 47 17.0

14 52 19.0

Dimensions (mm)

B L N

DCL.91.105.0TK

DCL.91.127.0TK

DCL.91.149.0TK

Part number

l Material: blackened steel

00

0S

1S

Series

ø B N

L

DCN Spanners for assembling plugs with 3 latches

9 42 12

12 47 17

14 53 19

20 74 22

Dimensions (mm)

B L N

DCN.91.905.0TK

DCN.91.125.0TK

DCN.91.149.0TK

DCN.91.201.5TK

Part number

l Material: blackened steel

00

0S

1S

3S

Series

S1

DCD Torque wrench for collet nut

DCD.00.003.PA045

DCD.00.003.PA050

DCD.00.003.PA060

DCD.0B.005.PA070

DCD.0B.005.PA080

DCD.0E.007.PA070

DCD.0E.007.PA080

DCD.0S.005.PA065

DCD.1B.015.PA090

DCD.1E.008.PA090

DCD.1S.015.PA085

DCD.2B.025.PA120

DCD.2E.020.PA120

DCD.2S.025.PA110

DCD.3B.040.PA140

DCD.3B.040.PA150

DCD.3E.030.PA150

DCD.4B.070.PA200

DCD.4E.050.PA190

Part number

00

0B

0E/0K

0S

1B

1E/1K

1S

2B

2E/2K

2S

3B

3E/3K

4B

4E/4K

Series

4.5

5.0

6.0

7.0

8.0

7.0

8.0

6.5

9.0

8.5

12.0

11.0

14.0

15.0

20.0

19.0

S1

(mm)

0.25

0.50

0.70

0.50

1.50

0.80

1.50

2.50

2.00

2.50

4.00

3.00

7.00

5.00

Torque

(Nm)

155www.lemo.com

®®

ø B

ø A

220

L

ø A

The plug end must be held in the pliers whilst the nut is

tightened with the flat spanner.

Example for use

Spanner Pliers DPF

DCL Assembly tool for FVB.00.303.NLA plugs

5 165

Dim. (mm)

A L

DCL.91.516.5TK

Part number

00

Series

DPF Pliers for assembling plugs (series K and E)

10 –

– 12

15 –

– 18

Dim. (mm)

A B

0E-0K

1E-1K

2E-2K

3E-3K

Series

DPF.91.001.TA

DPF.91.023.TA

Part number

DTA Taps

M7 x 0.5

M9 x 0.6

00

0S-0B

Series Thread

DTA.99.700.5Z

DTA.99.900.6Z

Part number

156 www.lemo.com

®®

157www.lemo.com

®®

P1 P2 P3 P4 P5 P6 P8

ø A1) B L ø A L ø A B L ø A B L ø A2) L ø A B H ø A B C

P9 P10

ø A B L ø A L

L mini

B + 0 . 1

0

ø A

+ 0.1

0

P1-P3-P4-P9

L mini

ø A

P2-P5-P10-P11

H

ø A + 0 . 1

0

B + 0 . 1

0

P6-P7

ø A + 0 . 1

0

B + 0 . 1

0

ø C

120° x 3

P8

Series Torque (Nm)

Metal shell Plastic shell4)

Cut-out types

Mounting nut torque

Note: 3) in series 1B use P9.

B and T series

Panel cut-outs

Model

ECG

EEG

EGG

EFG

EHG

EJG

Type

P1

P2

P1

P5

Model

EKG

ENG

ENY

ESG

EXG

EYG

Type

P1

P1/P2

P2/P10

P1/P10

Model

FAG

FWG

HCG

HEG

HGG

HHG

Type

P1

P9

P3

P9

Model

HMG

HNG

PEG

PFG

PKG

Rl l

Type

P9

P1

P4

Model

Sl l

XBG

XPF

XRB

YHG

Type

P4/P93)

P2

P9

1.0 0.4

2.5 0.4

4.5 0.7

5.0 –

6.0 0.8

9.0 1.0

12.0 5.0

17.0 –

00-TT

0B-0T

1B-1T

XB

2B-2T

3B-3T

4B

5B

Series

7.1 6.4 12.5 7.1 11.5 – – – – – – – – – – – – – – 7.1 – 12 – –

9.1 8.3 14.5 9.1 13.5 14.1 12.6 20.1 10.1 9.1 15.0 8.30 10.5 – – – – – – 9.1 8.3 15 – –

12.1 10.6 18.5 – – 16.1 14.6 22.0 14.1 12.6 21.0 11.17 14.0 – – – – – – 12.1 10.6 19 11.1 17

14.1 12.6 21.5 – – – – – – – – – – – – – – – – – – – – –

15.1 13.6 22.5 – – 19.2 17.1 28.0 16.1 15.1 23.0 13.95 18.0 – – – – – – 15.1 13.6 23 – –

18.2 16.6 27.0 – – – – – 20.2 18.6 29.5 – – – – – – – – 18.2 16.6 27 – –

25.2 23.6 36.0 – – – – – 25.2 23.6 36.1 – – – – – – – – 25.2 23.6 36 – –

35.2 33.6 44.0 – – – – – 35.2 33.6 47.1 – – 3.3 35.2 34 2.8 35.2 47 35.2 33.6 47 – –

00-TT

0B-0T

1B-1T

XB

2B-2T

3B-3T

4B

5B

Note: 4) these values apply when metal shell are mounted with insulating washer.

Note: 1) when using the tapered washer (GBB) a round hole apply 00-TT: ø 7.6 mm / 0B-0T: ø 9.6 mm / 1B-1T: ø 12.6 mm / 2B-2T: ø 15.7 mm /

3B-3T: ø 18.8 mm / 4B: ø 26 mm / 5B: ø 36 mm (tolerance: 0/+0.02). 2)tolerance: 0/+0.02

www.lemo.com

®®

P1 P2 P3 P4 P5 P6 P7

ø A1) B L ø A L ø A B L ø A B L ø A2) L ø A B H ø A B H

P10 P11

ø A L ø A L

S series

Note: 3) in series 6S use P2. 4) use only ø A in 1S series. 5) in series 4S and 5S use P2.

Note: 6) these values apply when metal shell are mounted with insulating washer. 1 N = 0.102 kg

Series Torque (Nm)

Metal shell Plastic shell6)

Cut-out types

Mounting nut torque

Model

EBC

EBD

EBS

ECP

EEP

EHP

Type

P6

P7

P1

P2/P1

Model

ERA

ERC

ERD

ERN

ERS

EXP

Type

P1

P2

P2/P10

Model

EWB

FAA

HCP

HGP

HGW

PSA

Type

P3

P1/P23)

P34)

P3

P11

P1

Model

PSP

PSS

RAD

SWH

Type

P1

P1/P25)

P4

2.5 0.4

4.5 0.7

6.0 0.8

9.0 1.0

12.0 5.0

17.0 –

22.0 –

0S

1S

2S

3S

4S

5S

6S

Series

00

0S

1S

2S

3S

4S

5S

6S

7.1 6.4 12.5 7.1 11.5 – – – – – – – – – – – – – –

9.1 8.3 14.5 9.1 13.5 12.1 10.6 20.0 10.1 9.1 15 – – – – – – – –

12.1 10.6 18.5 12.1 19.0 14.1 12.6 21.0 12.1 10.6 18 11.92 15.5 3.3 12.1 12.7 2.7 11.1 12.4

15.1 13.6 22.5 15.1 21.5 16.1 14.6 22.0 16.1 15.1 23 – – 3.3 15.1 15.5 – – –

18.2 16.6 27.0 18.2 27.0 20.2 18.6 30.0 20.2 18.6 29 – – 3.3 18.2 18.0 – – –

25.2 23.6 36.0 25.2 34.0 25.2 23.6 36.0 25.2 23.6 36 – – – – – – – –

35.2 33.6 44.0 35.2 44.0 35.2 33.6 47.0 35.2 33.6 47 – – 4.4 35.2 36.8 – – –

48.3 45.6 58.0 48.3 58.0 48.3 45.6 60.0 48.3 45.6 60 – – – – – – – –

– – – –

– – 9.1 16

11.1 17 12.1 19

– – – –

H

øA

L mini

Panel cut-out for mounting with double panel washer

(S-B series)

GRC

B + 0 . 1

0

ø A

+ 0.1

0

Panel cut-out for mounting with insulating washer

(S-B series)

Note: for nut tightening torques please refer to the corresponding series in the table on page 157.

GRA

Dimensions (mm)

ø A H L

Series

0S-0B

1S-1B

11 14 13.5

14 20 17.0

Dim. (mm)

ø A B

Series

00

0S-0B

1S-1B

2S-2B

3S-3B

4S-4B

8.9 8.1

10.9 10.0

13.9 12.3

18.0 16.3

21.9 20.3

29.1 27.4

Note: 1) when using the tapered washer (GBB) a round hole apply 00: ø 7.6 mm / 0S: ø 9.6 mm / 1S: ø 12.6 mm / 2S: ø 15.7 mm / 3S: ø 18.8 mm /

4S: ø 26 mm / 5S: ø 36 mm (tolerance: 0/+0.02). 2) tolerance: 0/+0.02

158

159www.lemo.com

®®

P1 P6 P7

ø A B L ø A B H ø A B H

L mini

B + 0 . 1

0

ø A

+ 0.1

0

P1

H

ø A + 0 . 1

0

B + 0 . 1

0

P6-P7

Series

Cut-out types

Mounting nut torque

Note: 2) for this model dimension B = 18.1. 3) for this model dimension B = 19.1.

K series

Model

EBG

EDG

EEG

EGG

EHG

Type

P7

P72)

P1

Model

ENG

EVG

FAG

FXG

HEG

Type

P1

P6

P1

Model

HGG

PBG

PEG

PKG

Sl l

Type

P1

P73)

P1

5

7

9

12

17

22

0K

1K

2K

3K

4K

5K

Series

0K

1K

2K

3K

4K

5K 1 N = 0.102 kg

Torque

(Nm)

14.1 12.6 20.5 – – – – – –

16.1 14.6 22.5 – – – – – –

20.2 18.6 29.0 – – – – – –

24.2 22.6 35.5 3.5 22.6 20.6 3.5 23.1 23.0

30.2 28.6 43.0 3.5 28.6 27.0 3.5 30.1 29.0

45.2 42.6 57.0 4.5 42.6 38.0 4.5 45.1 44.0

P1 P6

ø A B L ø A B H

E series

Series

0E

1E

2E

3E

4E

5E

6E

14.1 12.6 20.5 – – –

16.1 14.6 22.5 – – –

20.2 18.6 29.0 2.9 15.1 11.8x20.4

24.2 22.6 35.5 – – –

30.2 28.6 43.0 – – –

45.2 42.6 57.0 – – –

55.3 52.1 68.0 – – –

Cut-out types E series

Model

EBR

EEP

EHP

ERA

ERB

ERC

Type

P6

P1

Model

FAA

HGP

PSA

PSP

SWH

Type

P1

Series

Mounting nut torque

5

7

9

12

17

22

27 1 N = 0.102 kg

Torque

(Nm)

0E

1E

2E

3E

4E

5E

6E

®®

160 www.lemo.com

PCB drilling pattern

Fixed socket with straight print contact (B-K-T series) P15

ø A

ø B

1

2

302

ø A

ø B

C°

1

3

2

303

ø A

ø B

C°

51

3

4

2

305

ø A

ø B

C°

16

5

3

7

4

2

307

ø A

ø B

C°

41

32

304

ø A

ø B

C°

61

5

34

2

306

ø A

ø B

C°

1

3 6

7

8

4 5

2

308

ø A

ø B

C°

51

3

6

4

2

306

C°

ø A

ø B

1

5

3 7

8

9

64

2

309

ø A

ø B

C°

1

5

3 7

8

64

2

308

Dimensions

A B

Series

00-TT

0B-0K-0T

1B-1K-1T

2B-2K-2T

0.6 1.2

0.8 2.2

0.8 2.8

0.8 4.4

Dimensions

A B C

Series

00-TT

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

0.6 1.35 120°

0.8 2.30 120°

0.8 3.00 120°

0.8 4.60 120°

0.8 5.60 120°

Dimensions

A B C

Series

00-TT

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

0.6 1.6 45°

0.6 2.5 45°

0.8 3.1 45°

0.8 5.0 45°

0.8 6.2 45°

Dimensions

A B C

Series

00-TT 0.5 1.7 72°

Dimensions

A B C

Series

0B-0K-0T

1B-1K-1T

0.6 3.0 60°

0.8 3.7 60°

Dimensions

A B C

Series

2B-2K-2T

3B-3K-3T

0.8 5.6 72°

0.8 7.1 72°

Dimensions

A B C

Series

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

0.6 3.00 60°

0.8 3.70 60°

0.8 5.80 60°

0.8 7.08 60°

Dimensions

A B C

Series

1B-1K-1T  0.8 3.8 51°26’

Dimensions

A B C

Series

2B-2K-2T

3B-3K-3T

0.8 6.4 45°

0.8 7.5 45°

Dimensions

A B C

Series

0B-0K-0T

3B-3K-3T

0.6 3.2 45°

0.8 7.5 45°

ø A

ø B

C°

1

4

5

3

2

305 Dimensions

A B C

Series

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

0.6 2.8 72°

0.8 3.4 72°

0.8 5.2 72°

0.8 6.7 72°

A A

Note: contact numbering is for female contact version only.

®®

161www.lemo.com

H

ø B

C°

D°

ø A

1 8

54

9

10 63

2 7

310 Series

1B-1K-1T

2B-2K-2T

3B-3K-3T

 0.6 3.95 45° 22°30’1.40

 0.8 6.30 45° 22°30’2.15

 0.8 7.90 45° 22°30’2.80

Dimensions

A B C D H

D°

ø A

120°

ø H

ø B

C°

312 Series

0B-0T 0.5 3.3 40° 20° 1.25

Dimensions

A B C D H

0.6 8.8 45°25°43’22°30’ 5

D°

72°

ø A

ø B

ø H

316

ø A

ø B

ø H

C°

D°

ø E

324

ø H

ø B

ø A

D°

E°

C°

322 Dimensions

A B C D E H

E°

C°

D°

ø A

ø B

ø H

318

D°

C°

ø A

E°

ø B

ø H

319

E°

D°

72°

ø A

ø B

ø H

316

ø A

ø H

ø B

D°

C°

320

ø B

ø H

ø A

E°

D°

51°25’

322

Dimensions

A B D H

Series

1B-1K-1T  0.6 4.4 32°44’ 2.00

Series

2B-2K-2T

3B-3K-3T

4B-4K

 0.8 6.6 32°44’16°22’3.10

 0.8 8.4 32°44’16°22’3.86

 0.6 10.5 32°44’16°22’5.00

Dimensions

A B D E H Series

2B-2K-2T

3B-3K-3T

0.8 6.7 60° 30° 15° 3.50

0.8 8.4 60° 30° 15° 4.34

Dimensions

A B C D E H

Series

2B-2K-2T 0.8 6.7 60° 30° 15° 3.5

Dimensions

A B C D E H

Series

XB  0.6 5.7 25°42’12°51’ 3.1

Dimensions

A B D E H

Series

3B-3K-3T

4B-4K

0.6 8.6251°26’27°42’4.78

0.611.0051°26’27°42’6.00

Dimensions

A B C D H

Series

3B-3K-3T

4B-4K

0.6 8.845°25°43’1.85.30

0.611.145°25°43’2.26.65

Dimensions

A B C D E H

Series

3B-3K-3T

D°

ø A

ø H

ø B

C°

312

36°

C°

ø H

ø B

ø A

314

Series

2B-2K-2T

3B-3K-3T

 0.8 6.50 45° 22°30’2.80

 0.8 8.20 45° 22°30’3.40

Dimensions

A B C D H

Series

1B-1K-1T

2B-2K-2T

3B-3K-3T

0.6 4.4 90° 1.90

0.8 6.5 90° 2.65

0.8 8.2 90° 3.40

Dimensions

A B C H

D°

ø A

ø H

ø B

C°

312 Series

XB  0.8 5.40 45° 22°30’2.40

Dimensions

A B C D H

ø 4.2

ø 1.6

ø 7

ø 0.6

40°

25°43'

120°

2B-2K-2T.326

ø 5.6

ø 2.1

ø 9

ø 0.6

40°

25°43'

120°

3B-3K-3T.326

Note: contact numbering is for female contact version only.

®®

162 www.lemo.com

90°

ø 0.6

2.6

ø 5.7

2.2

ø 9

11°15'

36°

2

°

3

0

'

3B-3K-3T.330

18°

27°42'

51°26'

ø 0.6

ø 7.94

ø 4.24

ø 11.64

4B-4K.340

7°30'

11°15'

ø 0.6

15°

22°30'

ø 14.2

ø 9

ø 3.8

ø 19.4

36°

5B-5K.354

ø 0.6

60°

27°41'32''

ø 14.96

ø 10.08

ø 5.05

ø 19.84

1

3

°

5

1

'

1

8

°

5

7

'

5B-5K.364

ø 7.0

ø 7.2

ø 0.6

7.4

ø 3.1

ø 11.4

90°

11°15'

36°

2

°

3

0

'

4B-4K.330

ø 0.6

ø 13.73

ø 8.36

ø 3.1

24°

40°

15°40'

120°

ø 19.2

5B-5K.350

120°

40°

24°

ø 0.6

ø 8.65

ø 5.3

17°8'34''

ø 12

ø 2

4B-4K.348

Note: all views are from the side of the socket.

36°

ø 2.2

ø 0.6

4.6

ø 7

72°

21°11'

2B-2K-2T.332

21°11’

32°44’

2.2

ø 0.6

ø 5.7

ø 9

2.6

3B-3K.332

163www.lemo.com

®®

Length of straight print contacts

(for socket Ell)

ø C

L

ø C

L

Dimensions

ø C L

Models

EZG/EYG XPF

ø C L ø C L

Note: This table does not apply for socket Hll; socket EHland plugs FAl/FWl.

Length of straight print contacts

(for socket EZG/EYG/XPF)

EllEZG/EYG/XPF

ø A

B

EYG-EZG

Fixed socket for printed circuit (B series) P16

ø A

B

XPF.0B

Note: Mounting torque for screws: 0.1 Nm. 1) to solder. 2) to screw.

Holes for fixing the housing

Series

00

0B

1B

2B

0.81) 5.08

1.72) 7.62

1.72) 10.16

Dimensions

A B Series

0B 1.7 5.08

Dimensions

A B

Type

302/303/304

0.5 3.0

302/303

304/305/306/307/309

312

0.7 3.2

0.5 3.2

0.4 3.0

302/303/304/305/306/307/308

310/314/316

0.7 3.0

0.5 4.0

312

322

0.7 3.0

0.5 3.0

302/303/304/305/306/307

308/310/312/314/316/318/319

326/332

0.7 3.0

0.5 3.0

303/304/305/306/307/308/309

310/312/314/316/318

320/322/324/326/330/332

0.7 3.0

0.5 5.0

316/320/324/330/340/348

0.5 5.0

348

350/354/364

0.7 5.0

0.5 5.0

302/303

304/305

306/307/309

0.7 4.5 – –

0.5 4.5 0.7 3.0

0.5 3.0 – –

302/303/304/305/306/307/308

310/314/316

0.7 3.8 – –

0.5 3.8 – –

302/303/304/305/306/307/308

310/312/314/316/318/319

0.7 5.5 – –

Type

0B

0K

0T

00

TT

1B

1K

1T

2B

2K

2T

3B

3K

3T

5B

5K

4B

4K

XB

0B

1B

2B

®®

164 www.lemo.com

ø 0.7

2.542.54

2.54 2.542.54

2.54

7

12

9

8

1

5

4

2

6

11

10

3

2B-2K-2T / 3B-3K-3T.312

ø 0.7

2.542.54

1.27

2.54 2.54

9

11

2

7

13

4

8

14

12

3

10

1

6

5

1B-1K-1T / 2B-2K-2T.314

ø 0.7

ø 0.9

(3B-3K)

2.542.54

2.54

8

1

2

7

3

6

5

4

2B-2K-2T / 3B-3K-3T.308

ø 0.7

ø 0.9

(3B-3K)

2.542.54

1.27

2.54

7

9

2

6

10

3

8

1

5

4

1B-1K-1T / 2B-2K-2T /

3B-3K-3T.310

Fixed socket with elbow print contact (B-K-T series) P17

ø A

2.54

1 2

302

ø A

LL

2.54

3

2

1

303

ø 0.7

2.542.54

1.27

1

5 4

2 3

0B-0K-0T.305

ø 0.7

2.542.54

1.27

1

5

2

3

4

1B-1K-1T.305

ø 0.9

2.542.54

1

5 4

2 3

2B-2K-2T.305

ø A

L

2.54

4 3

1 2

304

ø 0.7

2.542.54

1.27

2.542.54

5

2

3

4

1

6

0B-0K-0T / 1B-1K-1T.306

A A

ø 0.7

2.542.54

1.27

7

5

2

6

1

4

3

0B-0K-0T / 1B-1K-1T.307

ø 0.9

2.542.54

1.27

7

5

2

3

4

1

6

2B-2K-2T.307

ø 0.9

2.542.54

1.27

5

1

4

6

2

3

2B-2K-2T / 3B-3K-3T.306

ø 0.7

2.542.54

0.92

7 6

1 8

2 3

5

4

1B-1K-1T.308

Series

00-TT

0B-0K-0T

1B-1K-1T

2B-2K-2T

3B-3K-3T

0.6 2.54

0.7 2.54

0.9 3.50

0.9 2.54

Dimensions

A L

Series

00-TT

0B-0K-0T

1B-1K-1T

2B-2K-2T

0.6 1.27

0.7 1.27

0.9 1.27

0.9 2.54

Dimensions

A L

Series

00-TT

0B-0K-0T

1B-1K-1T

2B-2K-2T

0.6

0.7

0.9

Dim.

A

ø 0.7

2.542.54

1.27

2.54 2.54

9

11

2

7

13

4

8

14

12

3

10

1

6

5

3B-3K-3T.314

ø 0.7

2.542.54

1.27

2.54 2.54

89

4

5

2

12

10

11

1

3

15

14

7

6

16

13

2B-2K-2T / 3B -3K-3T.316

ø 0.7

1.27

9

4

14

18

10

11

13

17

15

712

1 6

52

8

16

3

1.27

2B-2K-2T.318

591

ø 0.6

2.542.54

1.27

4

6

3

7

2

8

0B-0K-0T.309

Note: contact numbering is for female contact version only.

®®

165www.lemo.com

Fixed socket with elbow print contact (B-K-T series) P17

2.542.54

1.27

2.54 2.54

ø 0.7

12

22

15

16

3

10

20

19

18

5

11

21

23

24

17

4

9

8

7

6

13

14

1

2

3B-3K-3T.324

26

25

21

17

4

11

ø 0.6

2.542.54

1.27

2.54 2.54

14

1

23

15

13

2

22

3

24

16

12

20

5

19

18

10

2.54

8

7

9

6

26

25

21

17

4

11

ø 0.7

2.542.54

1.27

2.54 2.54

14

1

23

15

13

2

22

3

24

16

12

20

5

19

18

10

2.54

8

7

9

6

ø 0.7

2.542.54

1.27

2.54 2.54 2.54

23

6

18

17

26

16

1

22

21

10

7

15

2

9

8

30

28

11

24

5

29

20

12

25

4

27

19

13

2.54

3

14

ø 0.7

2.542.54

1.27

2.54 2.54

13

1

2

12

14

15

3

9

8

7

6

11

20

16

4

10

19

17

18

5

3B-3K-3T.320

2B-2K-2T.326 3B-3K-3T.326 3B-3K-3T.330

ø 0.7

1.27

9

4

14

18

10

11

13

17

15

712

1 6

52

8

1619

3

1.27

2B-2K-2T.319

ø 0.7

5.082.54

1.27

2.54

17

4

14

13

18

12

1

16

15

8

5

11

2

7

6

9

3

10

3B-3K-3T.318

Elbow socket (90°) for printed circuit (B series) P18 P19 P20

7.62 ø 0.8

2.54

7.62

ø 0.8

2.54

ø 0.8

==

ø 0.6

1.27

5.08

1.9

ø 0.8

==

ø 0.6

0.63

1.27

5.08

1.9

ø 0.8

1.27

ø 0.6

5.08

1.27

1.9

ø 0.8

1.27

ø 0.6

5.08

1.27

2.54

P18 - EPG.00.302 - XBG.00.302

XRB.00.3021)

P18 - EPG.00.3032) - XBG.00.3032)

XRB.00.3031)

P18 - EPG.00.304 - XBG.00.304

XRB.00.3041)

P18 - EPG.00.305 P19 - EPG-EXG (0B/1B.302)

Solder mount

7.62

2.54

ø 1.7

7.62

ø 0.8

2.54

P19 - EPG-EXG (0B/1B.302)

Screw mount

Note: 1) for the XRB.00 series the holes for shell fixing are different (see p. 35).

2) the dimensions for the EPG.00.303.HLN and XBG.00.303.HLN models are given on page 26. For other models please contact factory.

A A

Note: contact numbering is for female contact version only.

32

29

25

20

5

13

ø 0.6

2.542.54

1.27

2.54 2.54 2.54

17

1

16

2

27

18

15

3

26

4

28

19

14

2.54

23

22

11

7

10

9

8

31

30

24

21

6

12

2B-2K-2T.332

ø 0.7

2.54

1.27

2.54 2.54 2.54

19

18

28

17

1

16

2

25

6

31

22

12

27

4

29

20

14

2.54

3

15

32

30

26

21

5

10

9

8

24

23

11

7

13

2.54

3B-3K.332

®®

166 www.lemo.com

Elbow socket (90°) for printed circuit (B series) P18 P19 P20

7.62 ø 0.8

2.54

7.62

ø 0.8

2.54

P19 - EPG-EXG (0B/1B.306)

Solder mount

7.62 ø 0.8

2.54

1.27

7.62

ø 0.8

1.27

2.54

P19 - EPG-EXG (0B/1B.307)

Solder mount

7.62

2.54

ø 1.7

7.62

ø 0.8

2.54

P19 - EPG-EXG (0B/1B.306)

Screw mount

12.7

1.27

2.54

1.27

12.7

ø 0.8

ø 0.7

P20 - EPG.1B.314

Solder mount

12.7

1.27

2.54

1.27

12.7

ø 1.7

ø 0.7

P20 - EPG.1B.314

Screw mount

7.62

2.54

ø 1.7

1.27

7.62

ø 0.8

1.27

P19 - EPG-EXG (1B.310)

Screw mount

7.62

2.54

ø 1.7

1.27

7.62

ø 0.8

1.27

2.54

P19 - EPG-EXG (0B/1B.307)

Screw mount

7.62

2.54

ø 1.7

1.27

7.62

ø 0.8

1.27

P19 - EPG-EXG (1B.308)

Screw mount

7.62

2.54

ø 1.7

1.27

7.62

ø 0.8

1.27

P19 - EPG-EXG (0B.309)

Screw mount

7.62 ø 0.8

2.54

1.27

7.62

ø 0.8

1.27

P19 - EPG-EXG (1B.308)

Solder mount

7.62 ø 0.8

2.54

1.27

7.62

ø 0.8

1.27

P19 - EPG-EXG (0B.309)

Solder mount

7.62 ø 0.8

2.54

1.27

7.62

ø 0.8

1.27

P19 - EPG-EXG (1B.310)

Solder mount

ø A

ø B

302

ø A

ø B

C°

303

Fixed socket with straight print contact (S-E series) P21

Dimensions

A B C

Series

0S-0E

1S-1E

2S-2E

0.6 2.8 45°

0.8 3.5 45°

0.8 5.5 60°

Dimensions

A B

Series

0S-0E

1S-1E

2S-2E

0.8 2.2

0.8 3.0

0.8 4.5

7.62 ø 0.8

2.54

7.62

ø 0.8

2.54

P19 - EPG-EXG (0B/1B.305)

Solder mount

7.62

2.54

ø 1.7

7.62

ø 0.8

2.54

P19 - EPG-EXG (0B/1B.305)

Screw mount

7.62 ø 0.8

2.54

7.62

ø 0.8

2.54

P19 - EPG-EXG (0B/1B.303)

Solder mount

7.62 ø 0.8

2.54

7.62

ø 0.8

2.54

P19 - EPG-EXG (0B/1B.304)

Solder mount

7.62

2.54

ø 1.7

7.62

ø 0.8

2.54

P19 - EPG-EXG (0B/1B.303)

Screw mount

7.62

2.54

ø 1.7

7.62

ø 0.8

2.54

P19 - EPG-EXG (0B/1B.304)

Screw mount

®®

167www.lemo.com

Fixed socket with straight print contact (S-E series) P21

Note: all views are from the side of the socket.

ø 0.8

FE

C°

D°

60°

307

6 x 1.2

ø 0.8

1.3

3.2

3S-3E.314

6 x 1.2

ø 0.8

1.3

3.2

3S-3E.312

8 x 1

ø 0.8

1.2

2.9

3S-3E.316

8 x 1

ø 0.8

1.2

2.9

3S-3E.318

6 x 1.2

ø 0.8

1.3

3.2

3S-3E.313

ø A

ø B

C°

D°

308

E

ø B

C°

D°

ø A

310

Dimensions

C D E F

Series

2S-2E

3S-3E

 45° 22°30’ 2.75 3.25

 45° 22°30’ 3.25 3.90

Dimensions

A B C D

Series

2S-2E

3S-3E

 0.8 6.5 45° 22°30’

 0.8 7.8 45° 22°30’

Series

2S-2E

3S-3E

 0.8 6.5 45° 22°30’1.25

 0.8 7.8 45° 22°30’1.50

Dimensions

A B C D E

ø A

ø B

C°

304

ø A

ø B

C°

D°

305

ø A

ø B

C°

306

Dimensions

A B C

Series

0S-0E

1S-1E

2S-2E

0.6 2.8 45°

0.8 3.5 45°

0.8 5.0 45°

Dimensions

A B C D

Series

1S-1E

2S-2E

0.8 3.5 60° 45°

0.8 5.5 60° 60°

Dimensions

A B C

Series

1S-1E

2S-2E

3S-3E

0.8 3.5 60°

0.8 5.5 60°

0.8 6.5 60°

Dimensions

ø C L

Length of straight print contacts (for socket Ell)

ø C

L

Note: This table does not apply for HGP and EHP sockets and for FAA plugs.

Type

302

303/304

0.7 3.0

0.5 3.0

302

303/304/305

305/306

0.7/1.5 3.0/5.0

0.7 3.0

0.5 3.0

303/304/305/306/307/308/310

0.7 3.0

Dimensions

ø C L

Type

305/306/307/308/310

312/313/314/316/318

0.7 3.0

0S

0E

1S

1E

2S

2E

3S

3E

168 www.lemo.com

®®

A A

ø A

2.54

1 2

302

ø A

B

2.54

C

1

2

3

303

ø A

B

2.54

1

2

4

3

304

Fixed socket with elbow print contact (S-E series) P24

ø A

2.542.54

3 4

1

2

5

305

ø A

2.4 2.4

2.54

1

2

3

6

5

4

306

Series

0S-0E

1S-1E

2S-2E

0.7 2.0

0.7 3.5

0.9 3.5

Dimensions

A B

Series

0S-0E

1S-1E

0.7

0.9

Dim.

A

Series

1S-1E

2S-2E

0.7

0.9

Dim.

A

Series

1S-1E

2S-2E

0.7

0.9

Dim.

A

Series

0S-0E

1S-1E

0.7 2.00 1.00

0.7 2.48 1.24

Dimensions

A B C

7.62

2.54 2.54

2.542.54

2.54

7.62

ø 1.7

7.62 ø 0.8

2.54 2.54

2.542.54

2.54

7.62

P22 - EPL - EXP

Solder mount

P22 - EPL - EXP

Screw mount

Elbow socket (90°) for printed circuit (S series) P22 P23

==

2.54

ø 0.8

5.08

P23 - EPL.00.113

==

2.54

ø 1.1

5.08

P23 - EPL.0S.116

Note: all dimensions are in millimetres.

ø 0.7

6

2.542.54

2.5

1.75

2.54

2

3

7

6

1

4

8

5

2S-2E.308

ø 0.7

2.542.54

1.27

2

3

4

1

5

7

6

2S-2E.307

ø 0.7

2.542.54

1.2

2.54

1

2

3

12

13

14

4 8

5 9

6 10

7 11

ø 0.7

2.542.54

1.2 1.2

2.4

2.54

1

2

3

4

13

14

15

16

5 9

6 10

7 11

8 12

3S-3E.314 3S-3E.316

ø 0.7

1.2 1.2

2.542.54

2.4

2.54

1

2

11

12

3 7

4 8

5 9

6 10

3S-3E.312

ø 0.7

6

2.542.54

1.25

1.75

2.54

2

3

7

6

1

9

4

8

10

5

2S-2E / 3S-3E.310

169www.lemo.com

®®

0.5 7.0 4 2.5 10.0 4 3.0 9.5 4 2.5 12.5 4 3.0

0.35 7.0 4 2.5 – – – 9.5 4 2.5 – – –

0.9 14.5 7 3.5 17.0 7 4.0 19.5 7 3.5 22.0 7 4.0

0.7 14.5 7 3.5 17.0 7 4.0 19.5 7 3.5 22.0 7 4.0

0.5 14.0 7 2.5 18.0 7 3.0 19.0 7 2.5 23.0 7 3.0

0.35 14.0 7 2.5 – – – 19.0 7 2.5 – – –

1.3 14.5 8 3.5 18.0 8 4.0 25.5 8 3.5 28.0 8 4.0

0.9 14.5 8 3.0 18.0 8 4.0 25.5 8 3.0 28.0 8 4.0

0.7 14.5 8 3.0 18.0 8 4.0 25.5 8 3.0 28.0 8 4.0

0.5 16.5 8 2.5 – – – 27.5 8 2.5 – – –

0.7 16.5 7.5 3.5 – – – – – – – – –

0.5 17.5 8 4.0 – – – – – – – – –

2.0 19.0 9 4.0 22.0 9 5.5 30.0 9 4.0 33.0 9 5.5

1.6 19.0 9 3.5 22.0 9 5.5 30.0 9 3.5 33.0 9 5.5

1.3 18.0 9 3.5 20.0 9 4.0 29.0 9 3.5 31.0 9 4.0

0.9 17.0 9 3.0 20.0 9 4.0 28.0 9 3.0 31.0 9 4.0

0.7 17.0 9 3.0 20.0 9 4.0 28.0 9 3.0 31.0 9 4.0

0.5 17.0 9 2.5 – – – 28.0 9 2.5 – – –

3.0 24.0 10 4.5 28.0 10 5.5 35.0 10 4.5 39.0 10 5.5

2.0 23.0 10 4.0 27.0 10 5.5 34.0 10 4.0 38.0 10 5.5

1.6 23.0 10 3.5 27.0 10 5.5 34.0 10 3.5 38.0 10 5.5

1.3 22.0 10 3.5 25.0 10 4.0 33.0 10 3.5 36.0 10 4.0

1.3 3.5 4.0 3.5 4.0

22.0 10 25.0 10 33.0 10 36.0 10

2.0 4.0 5.5 4.0 5.5

0.9 21.0 10 3.0 25.0 10 4.0 32.0 10 3.0 36.0 10 4.0

0.7 21.0 10 3.0 25.0 10 4.0 32.0 10 3.0 36.0 10 4.0

Cable stripping lengths (B series)

elbow plugs (90°) with cable collet, clamping type D or M (solder or crimp contacts)

M3

straight plugs and sockets with cable collet, clamping type D or M (solder or crimp contacts)

M1

Cable assembly (B, K, T, S and E series)

Cable stripping lengths (mm)

M1 M3

Solder Crimp Solder Crimp

L S T L S T L S T L S T

Type

ø contact A

(mm)

00

S

T

L

302/303/304

305/306

0B1)

302/303

304/305

306/307/3092)

312

1B1)

302/303

304/305

306/307/308

310/314/316

XB

312

322

2B

302

303

304/305/306/307

308/310

312/314/316/318/319

326/332

3B

302

303/304

305/306/307

308/310

309

312/314/316/318

320/322/324/326/330/332

Note: 1) In 0B and 1B series, «L» and «S» dimensions shall be increased by 2 mm for the largest collet (D56 in 0B series; D76 in 1B series).

The tolerances on these dimensions are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.

170 www.lemo.com

®

3.0 33.0 12 4.5 36.0 12 5.5 41.0 12 4.5 45.0 12 5.5

2.0 32.0 12 4.0 36.0 12 5.5 41.0 12 4.0 45.0 12 5.5

1.6 32.0 12 3.5 36.0 12 5.5 39.0 12 3.5 43.0 12 5.5

1.3 32.0 12 3.5 36.0 12 4.0 39.0 12 3.5 43.0 12 4.0

0.9 32.0 12 3.0 34.0 12 4.0 39.0 12 3.0 43.0 12 4.0

0.7 32.0 12 3.0 34.0 12 4.0 39.0 12 3.0 43.0 12 4.0

6.0 42.0 18 7.5 – – – 70.0 18 7.5 – – –

4.0 47.0 18 5.5 50.0 18 7.0 75.0 18 5.5 78.0 18 7.0

3.0 47.0 18 4.5 50.0 18 7.0 75.0 18 4.5 78.0 18 7.0

2.0 46.0 18 4.0 49.0 18 5.5 74.0 18 4.0 77.0 18 5.5

1.6 46.0 18 3.5 49.0 18 5.5 74.0 18 3.5 77.0 18 5.5

1.3 45.0 18 3.5 48.0 18 4.0 74.0 18 3.5 77.0 18 4.0

0.9 45.0 18 3.0 48.0 18 4.0 74.0 18 3.0 77.0 18 4.0

4B

304

306/307

310

312

316/320/324/330

340/348

5B1)

302

304

310

314/316

320

330/340/348

350/354/364

Cable stripping lengths (B series)

elbow plugs (90°) with cable collet, clamping type D or M (solder or crimp contacts)

M3

straight plugs and sockets with cable collet, clamping type D or M (solder or crimp contacts)

M1

Cable stripping lengths (mm)

M1 M3

Solder Crimp Solder Crimp

L S T L S T L S T L S T

Type

ø contact A

(mm)

S

T

L

0.5 12.0 4 2.5 15.0 5 3.0

0.35 12.0 4 2.5 – – –

0.9 21.5 7 3.5 24.0 7 4.0

0.7 21.5 7 3.5 24.0 7 4.0

0.5 21.0 7 3.5 24.0 7 3.0

0.35 21.0 7 3.5 – – –

1.3 27.0 8 3.5 32.0 8 4.0

0.9 27.0 8 3.5 32.0 8 4.0

0.7 27.0 8 3.5 32.0 8 4.0

0.5 29.0 8 3.5 – – –

2.0 35.0 9 4.0 38.0 9 5.5

1.6 35.0 9 4.0 38.0 9 5.5

1.3 34.0 9 4.0 36.0 9 4.0

0.9 33.0 9 4.0 36.0 9 4.0

0.7 33.0 9 3.5 36.0 9 4.0

0.5 33.0 9 3.5 – – –

elbow plugs (90°) with cable collet, clamping type D or M (solder or crimp contacts) (FSG model)

M5

Cable stripping lengths (mm)

M5

Solder Crimp

L S T L S T

Type

ø contact A

(mm)

00

S

T

L

302/303/304

305/306

0B

302/303

304/305

306/307/3091)

312

1B

302/303

304/305

306/3072)/308

310/314/3163)

2B

302

303

304/305/306/307

308/310

312/314/316/318/319

326/332

Note: 1) center wire L = 16.5. 2) center wire L = 20.5. 3) 5 center wires L = 20.5.

The tolerances on these dimensions are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.

Note: 1) In 5B series, «L» and «S» dimensions shall be increased by 13 mm for the largest collet (D25).

171www.lemo.com

®

straight plug, short version, clamping type D or M (solder or crimp contacts)

M4

Cable stripping lengths (mm)

M4

Solder Crimp

L S T L S T

Type

ø contact A

(mm)

S

T

L

0.9 9.5 8 3.0 13.0 8 4.0

0.7 9.5 8 3.0 13.0 8 4.0

0.5 10.0 8 2.5 13.5 8 3.0

0B

302/303

304/305

306/307/3092)

straight plug, long version, clamping type D or M (solder or crimp contacts)

M2

Cable stripping lengths (mm)

M2

Solder Crimp

L S T L S T

Type

ø contact A

(mm)

S

T

L

1.3 39.5 8 3.5 43.0 8 4.0

0.9 39.5 8 3.0 43.0 8 4.0

0.7 39.5 8 3.0 43.0 8 4.0

0.5 42.0 8 2.5 – – –

1B1)

302/303

304/305

306/307/308

310/314/316

2.0 49.0 9 4.0 53.0 9 5.5

1.6 49.0 9 3.5 53.0 9 5.5

1.3 48.0 9 3.5 50.0 9 4.0

0.9 47.0 9 3.0 49.0 9 4.0

0.7 47.0 9 3.0 49.0 9 4.0

0.5 47.0 9 2.5 – – –

2B

302

303

304/305/306/307

308/310

312/314/316/318/319

326/332

Note: 1) In 1B series, «L» and «S» dimensions shall be increased by 2 mm for the largest collet (D76 in 1B series).

2) Crimp contacts are available only for connectors fitted with male contacts.

The tolerances on these dimensions are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.

Cable stripping lengths (B series)

®®

172 www.lemo.com

Cable stripping lengths (K series)

straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)

elbow plug (90°) with cable collet, clamping type C (solder or crimp contacts)

M1

M3

S

T

L

0.9 9.5 6 3.5 12.0 6 4.0 22.5 6 3.5 25.0 6 4.0

0.7 9.5 6 3.5 12.0 6 4.0 22.5 6 3.5 25.0 6 4.0

0.5 9.0 6 2.5 13.0 6 4.0 22.0 6 2.5 26.0 6 4.0

0.35 9.0 6 2.5 – – – 22.0 6 2.5 – – –

1.3 11.0 7 3.5 14.5 7 4.0 27.5 7 3.5 31.0 7 4.0

0.9 11.0 7 3.0 14.5 7 4.0 27.5 7 3.0 31.0 7 4.0

0.7 11.0 7 3.0 14.5 7 4.0 27.5 7 3.0 31.0 7 4.0

0.5 13.0 7 2.5 14.0 7 3.0 29.5 7 2.5 – – –

2.0 16.5 8 4.0 19.5 8 5.5 36.0 8 4.0 39.0 8 5.5

1.6 16.5 8 3.5 19.5 8 5.5 36.0 8 3.5 39.0 8 5.5

1.3 15.5 8 3.5 17.5 8 4.0 35.0 8 3.5 37.0 8 4.0

0.9 14.5 8 3.0 17.5 8 4.0 34.0 8 3.0 37.0 8 4.0

0.7 14.5 8 3.0 17.5 8 4.0 34.0 8 3.0 37.0 8 4.0

0.5 14.5 8 2.5 – – – 34.0 8 2.5 – – –

Cable stripping lengths (mm)

M1 M3

Solder Crimp Solder Crimp

L ST L ST L ST L ST

Type

ø contact A

(mm)

0K 302/303

304/305

306/307/3091)

312

1K 302/303

304/305

306/307/308

310/314/316

2K 302

303

304/305/306/307

308/310

312/314/316/318/319

326/332

Note: 1) crimp contacts are available only for connectors fitted with male contacts. The tolerances on these dim. are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.

3.0 19.0 10 4.5 23.0 10 5.5 48.0 10 4.5 53.0 10 5.5

2.0 18.0 10 4.0 22.0 10 5.5 48.0 10 4.0 52.0 10 5.5

1.6 18.0 10 3.5 22.0 10 5.5 48.0 10 3.5 52.0 10 5.5

1.3 17.0 10 3.5 20.0 10 4.0 47.0 10 3.5 50.0 10 4.0

1.3 3.5 4.0 3.5 4.0

17.0 10 20.0 10 47.0 10 50.0 10

2.0 4.0 5.5 4.0 5.5

0.9 16.0 10 3.0 20.0 10 4.0 46.0 10 3.0 50.0 10 4.0

0.7 16.0 10 3.0 20.0 10 4.0 46.0 10 3.0 50.0 10 4.0

3K 302

303/304

305/306/307

308/310

309

312/314/316/318

320/322/324/326/330

3.0 22.0 11 4.5 25.0 11 5.5 52.0 11 4.5 55.0 11 5.5

2.0 21.0 11 4.0 25.0 11 5.5 51.0 11 4.0 55.0 11 5.5

1.6 21.0 11 3.5 25.0 11 5.5 51.0 11 3.5 55.0 11 5.5

1.3 21.0 11 3.5 25.0 11 4.0 51.0 11 3.5 55.0 11 4.0

0.9 21.0 11 3.0 23.0 11 4.0 51.0 11 3.0 53.0 11 4.0

0.7 21.0 11 3.0 23.0 11 4.0 51.0 11 3.0 53.0 11 4.0

6.0 24.0 14 7.5 – – – – – – – – –

4.0 29.0 14 5.5 32.0 14 7.0 – – – – – –

3.0 29.0 14 4.5 32.0 14 7.0 – – – – – –

2.0 28.0 14 4.0 31.0 14 5.5 – – – – – –

1.6 28.0 14 3.5 31.0 14 5.5 – – – – – –

1.3 27.0 14 3.5 30.0 14 4.0 – – – – – –

0.9 27.0 14 3.0 30.0 14 4.0 – – – – – –

4K 304

306/307

310

312

316/320/324/330

340/348

5K 302

304

310

314/316

320

330/340/348

350/354/364

173www.lemo.com

®®

Cable stripping lengths (K series)

Note: the tolerances on these dim. are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.

straight plug and socket with oversize cable collet, clamping type K (solder or crimp contacts)

M2

Cable stripping lengths (mm)

M2

Solder Crimp

L S T L S T

Type

ø contact A

(mm)

S

T

L

1.3 23.5 8 3.5 27.5 8 4.0

0.9 23.5 8 3.0 27.5 8 4.0

0.7 23.5 8 3.0 27.5 8 4.0

0.5 24.5 8 2.5 – – –

1K

302/303

304/305

306/307/308

310/314/316

2.0 29.5 10 4.0 32.5 10 5.5

1.6 29.5 10 3.5 32.5 10 5.5

1.3 28.5 10 3.5 30.5 10 4.0

0.9 27.5 10 3.0 30.5 10 4.0

0.7 27.5 10 3.0 30.5 10 4.0

0.5 27.5 10 2.5 – – –

2K

302

303

304/305/306/307

308/310

312/314/316/318/319

326/332

3.0 37.0 11 4.5 41.0 11 5.5

2.0 36.0 11 4.0 40.0 11 5.5

1.6 36.0 11 3.5 40.0 11 5.5

1.3 35.0 11 3.5 38.0 11 4.0

1.3 3.5 4.0

35.0 11 38.0 11

2.0 4.0 5.5

0.9 34.0 11 3.0 38.0 11 4.0

0.7 34.0 11 3.0 38.0 11 4.0

3K

302

303/304

305/306/307

308/310

309

312/314/316/318

320/322/324/326/330

3.0 45.0 14 4.5 48.0 14 5.5

2.0 44.0 14 4.0 48.0 14 5.5

1.6 44.0 14 3.5 48.0 14 5.5

1.3 44.0 14 3.5 48.0 14 4.0

0.9 44.0 14 3.0 46.0 14 4.0

0.7 44.0 14 3.0 46.0 14 4.0

4K

304

306/307

310

312

316/320/324/330

340/348

®®

174 www.lemo.com

Cable stripping lengths (T series)

straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)

M1

S

T

L

0.9 9.5 6 3.5 12.0 6 4.0

0.7 9.5 6 3.5 12.0 6 4.0

0.5 9.0 6 2.5 13.0 6 3.0

0.35 9.0 6 2.5 – – –

1.3 11.0 7 3.5 14.5 7 4.0

0.9 11.0 7 3.0 14.5 7 4.0

0.7 11.0 7 3.0 14.5 7 4.0

0.5 13.0 7 2.5 14.0 7 3.0

2.0 16.5 8 4.0 19.5 8 5.5

1.6 16.5 8 3.5 19.5 8 5.5

1.3 15.5 8 3.5 17.5 8 4.0

0.9 14.5 8 3.0 17.5 8 4.0

0.7 14.5 8 3.0 17.5 8 4.0

0.5 14.5 8 2.5 – – –

Cable stripping lengths (mm)

M1

Solder Crimp

L ST L ST

Type

ø contact A

(mm)

0T 302/303

304/305

306/307/3091)

312

1T 302/303

304/305

306/307/308

310/314/316

2T 302

303

304/305/306/307

308/310

312/314/316/318/319

326/332

Note: 1) crimp contacts are available only for connectors fitted with male contacts. The tolerances on these dim. are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.

3.0 19.0 10 4.5 23.0 10 5.5

2.0 18.0 10 4.0 22.0 10 5.5

1.6 18.0 10 3.5 22.0 10 5.5

1.3 17.0 10 3.5 20.0 10 4.0

1.3 3.5 4.0

17.0 10 20.0 10

2.0 4.0 5.5

0.9 16.0 10 3.0 20.0 10 4.0

0.7 16.0 10 3.0 20.0 10 4.0

3T 302

303/304

305/306/307

308/310

309

312/314/316/318

320/322/324/326/330

0.5 7.0 4 2.5 10.0 4 3.0

0.35 7.0 4 2.5 – – –

TT 302/303/304

305/306

175www.lemo.com

®®

Cable stripping lengths for unipole connectors (S series)

elbow plugs (90°) with cable collet, clamping type C (solder contacts)

M3

straight plugs and sockets with cable collet, clamping type C (solder contacts)

M1

S

T

L

elbow plugs (90°) with cable crimping type E (crimp contacts)

M6

straight plugs and sockets with cable crimping type E (crimp contacts)

M5

1.3 9 4 4 19 5 7 7 4 2 17 5 7

Cable stripping lengths (mm)

M1 M5 M3 M6

Solder Crimp Solder Crimp

L S T L S T L S T L S T

Type

ø contact A

(mm)

00 113

1.6 11 5 4 – – – 8 5 2 – – –

0S 116

2.0 13 8 5 – – – 13 8 2 – – –

3.0 13 8 5 – – – 13 8 2 – – –

1S

120

130

3.0 18 9 6 – – – 15 9 2 – – –

4.0 18 9 6 – – – 15 9 2 – – –

2S

130

140

4.0 21 9 7 – – – 19 9 2 – – –

6.0 21 9 9 – – – 19 9 2 – – –

3S

140

160

4.0 25 9 7 – – – 23 9 2 – – –

6.0 25 9 9 – – – 23 9 2 – – –

4S

140

160

12.0 12 15 12 – – – – – – – – –

5S 112

straight plugs and sockets with oversize cable collet, clamping type K (solder contacts)

M2

S

T

L

1.3 16 4 4

Cable stripping

lengths (mm)

M2

Solder

L S T

Type

ø contact A

(mm)

00 113

1.6 19 5 4

0S 116

2.0 25 8 5

3.0 25 8 5

1S

120

130

3.0 34 9 6

4.0 34 9 6

2S

130

140

4.0 39 9 7

6.0 39 9 9

3S

140

160

4.0 50 9 7

6.0 50 9 9

4S

140

160

®®

176 www.lemo.com

Cable stripping lengths for multipole connectors (S series)

elbow plugs (90°) with cable collet, clamping type C (solder or crimp contacts)

M3

straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)

M1

S

T

L

0.9 10.0 5 3.5 15 5 4.0 10.0 5 3.5 15 5 4.0

0.7 10.0 5 3.5 15 5 4.0 10.0 5 3.5 15 5 4.0

Cable stripping lengths (mm)

M1 M3

Solder Crimp Solder Crimp

L S T L S T L S T L S T

Type

ø contact A

(mm)

0S 302

303/304

1.3 12.5 8 3.5 17 8 4.0 14.5 8 3.5 17 8 4.0

0.9 12.0 8 3.0 17 8 4.0 14.0 8 3.0 17 8 4.0

0.9

12.0 8 3.0 17 8 4.0 14.0 8 3.0 17 8 4.0

0.7

0.7 12.5 8 3.0 17 8 4.0 14.5 8 3.0 17 8 4.0

1S 302

303/304

305

306

1.6 17.0 9 3.5 22 9 5.5 17.0 9 3.5 22 9 5.5

1.3 17.5 9 3.5 22 9 4.0 17.5 9 3.5 22 9 4.0

1.3 3.5 3.5

17.5 9 22 9 4.0 17.5 9 22 9 4.0

0.9 3.0 3.0

0.9 17.0 9 3.0 22 9 4.0 17.0 9 3.0 22 9 4.0

2S 302

303/304/305/306

307

308/310

2.0 20.0 9 4.0 – – – – – – – – –

2.0 4.0

20.0 9 – – – – – – – – –

1.3 3.5

1.3 20.5 9 3.5 – – – – – – – – –

0.9 20.0 9 3.0 – – – – – – – – –

3S 302/303/304

305

306/307/308/310

312/313/314/316/318

4.0 25.0 9 7.0 – – – – – – – – –

3.0 23.5 9 4.5 – – – – – – – – –

3.0 4.5

23.5 9 – – – – – – – – –

2.0 4.0

2.0 21.0 9 4.0 – – – – – – – – –

2.0 4.0

21.0 9 – – – – – – – – –

1.3 3.5

1.3 24.5 9 3.5 – – – – – – – – –

0.9 24.5 9 3.5 – – – – – – – – –

4S 302

303/304

305

306

307

308/309/310/312/313/314

316/318/320/322/324

177www.lemo.com

®®

Cable stripping lengths for multipole connectors (S series)

elbow plugs (90°) with cable collet, clamping type C (solder contacts)

M3

straight plugs and sockets with cable collet, clamping type C (solder contacts)

M1

straight plug with cable collet, clamping type D or M (solder or crimp contacts)

M4

S

T

L

S

T

L

Cable stripping lengths (mm)

M1 M3

Solder Solder

L S T L S T

Type

ø contact A

(mm)

6.0 33.5 22 7.5 33.5 22 7.5

6.0 7.5 7.5

33.5 22 33.5 22

4.0 5.5 5.5

4.0 33.5 22 5.5 33.5 22 5.5

4.0 5.5 5.5

33.5 22 33.5 22

3.0 4.5 4.5

3.0 33.5 22 4.5 33.5 22 4.5

2.0 32.0 22 4.0 32.0 22 4.0

3.0 4.5 4.5

33.5 22 33.5 22

2.0 4.0 4.0

3.0 4.5 4.5

33.5 22 33.5 22

1.6 3.5 3.5

1.6 34.0 22 3.5 34.0 22 3.5

1.3 34.5 22 3.5 34.5 22 3.5

5S

302

303

304

305

306/308

310/312/316

314

318/322

320/324

330/336/340/344/348

8.0 37.0 15 10.0 37.0 15 10.0

4.0 37.0 15 7.0 37.0 15 7.0

3.0 37.0 15 6.0 37.0 15 6.0

2.0 37.0 15 7.0 37.0 15 7.0

1.6 37.0 15 4.5 37.0 15 4.5

1.3 37.0 15 4.0 37.0 15 4.0

0.9 37.0 15 4.0 37.0 15 4.0

6S

304

312/318

320/324

330/336/348

360

364/372

106

Cable stripping lengths (mm)

M4

Solder Crimp

L S T L S T

Type

ø contact A

(mm)

1.6 47.0 9 3.5 52 9 5.5

1.3 47.5 9 3.5 52 9 4.0

1.3 3.5

47.5 9 52 9 4.0

0.9 3.0

0.7 47.0 9 3.0 52 9 4.0

2S

302

303/304/305/306

307

308/310

®®

178 www.lemo.com

Cable stripping lengths for multipole connectors (S series)

straight plugs and sockets with oversize cable collet, clamping type K (solder or crimp contacts)

M2

S

T

L

0.9 19.5 5 3.5 23 5 4.0

0.7 20.0 5 3.5 23 5 4.0

Cable stripping lengths (mm)

M2

Solder Crimp

L S T L S T

Type

ø contact A

(mm)

0S 302

303/304

1.3 24.5 8 3.5 28 8 4.0

0.9 24.0 8 3.0 28 8 4.0

0.9

24.0 8 3.0 28 8 4.0

0.7

0.7 24.5 8 3.0 28 8 4.0

1S 302

303/304

305

306

1.6 33.0 9 3.5 38 9 5.5

1.3 33.5 9 3.5 38 9 4.0

1.3 3.5

33.5 9 38 9 4.0

0.9 3.0

0.9 33.0 9 3.0 38 9 4.0

2S 302

303/304/305/306

307

308/310

2.0 38.0 9 4.0 – – –

2.0 4.0

38.0 9 – – –

1.3 3.5

1.3 38.5 9 3.5 – – –

0.9 38.0 9 3.0 – – –

3S 302/303/304

305

306/307/308/310

312/313/314/316/318

4.0 50.0 9 7.0 – – –

3.0 48.5 9 4.5 – – –

3.0 4.5

48.5 9 – – –

2.0 4.0

2.0 49.0 9 4.0 – – –

2.0 4.0

49.0 9 – – –

1.3 3.5

1.3 49.5 9 3.5 – – –

0.9 49.0 9 3.0 – – –

4S 302

303/304

305

306

307

308/309/310/312/313/314

316/318/320/322/324

6.0 68.5 22 7.5 – – –

6.0 7.5

68.5 22 – – –

4.0 5.5

4.0 68.5 22 5.5 – – –

4.0 5.5

68.5 22 – – –

3.0 4.5

3.0 68.5 22 4.5 – – –

2.0 67.0 22 4.0 – – –

3.0 4.5

68.5 22 – – –

2.0 4.0

3.0 4.5

68.5 22 – – –

1.6 3.5

1.6 69.0 22 3.5 – – –

1.3 69.5 22 3.5 – – –

5S 302

303

304

305

306/308

310/312/316

314

318/322

320/324

330/336/340/344/348

179www.lemo.com

®®

Cable stripping lengths for unipole connectors (E series)

elbow plugs (90°) with cable collet, clamping type C (solder contacts)

M3

straight plugs and sockets with cable collet, clamping type C (solder contacts)

M1

S

T

L

Cable stripping lengths (mm)

M1 M3

Solder Solder

L S T L S T

Type

ø contact A

(mm)

1.6 9 5 4 20 5 4

0E 116

2.0 12 8 5 25 8 5

3.0 13 8 5 25 8 5

1E

120

130

3.0 16 9 6 33 9 6

4.0 15 9 6 33 9 6

2E

130

140

4.0 19 9 7 40 9 7

6.0 20 9 9 40 9 9

3E

140

160

6.0 23 9 9 50 9 9

4E 160

12.0 12 15 12 – – –

5E 112

straight plugs and sockets with oversize cable collet, clamping type K (solder contacts)

M2

S

T

L

Type

1E

120

130

2E

130

140

3E

140

160

4E 160

2.0 25 8 5

3.0 26 8 5

Cable stripping

lengths (mm)

M2

Solder

L S T

ø contact A

(mm)

3.0 28 9 6

4.0 27 9 6

4.0 36 9 7

6.0 37 9 9

6.0 50 9 9

®®

180 www.lemo.com

Cable stripping lengths for multipole connectors (E series)

elbow plugs (90°) with cable collet, clamping type C (solder or crimp contacts)

M3

straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)

M1

S

T

L

0.9 9.0 4 3.5 12 5 4.0 19.5 5 3.5 23 5 4.0

0.7 9.0 4 3.5 12 5 4.0 19.0 5 2.5 23 5 4.0

Cable stripping lengths (mm)

M1 M3

Solder Crimp Solder Crimp

L S T L S T L S T L S T

Type

ø contact A

(mm)

0E 302

303/304

1.3 10.5 6 3.5 15 8 4.0 23.5 8 3.5 28 8 4.0

0.9 10.5 6 3.0 15 8 4.0 23.0 8 3.0 28 8 4.0

0.9

10.5 6 3.0 15 8 4.0 23.0 8 3.0 28 8 4.0

0.7

0.7 10.5 6 3.0 15 8 4.0 23.5 8 3.0 28 8 4.0

1E 302

303/304

305

306

1.6 14.0 9 3.5 19 9 5.5 32.0 9 3.5 37 9 5.5

1.3 14.5 9 3.5 19 9 4.0 32.5 9 3.5 37 9 4.0

1.3 3.5 3.5

14.5 9 19 9 4.0 32.5 9 37 9 4.0

0.9 3.0 3.0

0.9 14.0 9 3.0 19 9 4.0 32.0 9 3.0 37 9 4.0

2E 302

303/304/305/306

307

308/310

2.0 17.0 9 4.0 – – – 38.0 9 4.0 – – –

2.0 4.0 4.0

17.0 9 – – – 38.0 9 – – –

1.3 3.5 3.5

1.3 17.5 9 3.5 – – – 38.5 9 3.5 – – –

0.9 17.0 9 4.0 – – – 38.0 9 3.0 – – –

3E 302/303/304

305

306/307/308/310

312/313/314/316/318

302

303/304

305

306

307

308/309/310/312/313/314

316/318/320/322/324

4.0 23.0 9 7.0 – – – 50.0 9 7.0 – – –

3.0 21.5 9 4.5 – – – 48.5 9 4.5 – – –

3.0 4.5 4.5

21.5 9 – – – 48.5 9 – – –

2.0 4.0 4.0

2.0 22.0 9 4.0 – – – 49.0 9 4.0 – – –

2.0 4.0 4.0

22.0 9 – – – 49.0 9 – – –

1.3 3.5 3.5

1.3 22.5 9 3.5 – – – 49.5 9 3.5 – – –

0.9 22.0 9 4.0 – – – 49.0 9 3.0 – – –

4E

6.0 46.5 15 7.5 – – – – – – – – –

6.0 7.5

46.5 15 – – – – – – – – –

4.0 5.5

4.0 46.5 15 5.5 – – – – – – – – –

4.0 5.5

46.5 15 – – – – – – – – –

3.0 4.5

3.0 46.5 15 4.5 – – – – – – – – –

2.0 45.0 15 4.0 – – – – – – – – –

3.0 4.5

45.5 15 – – – – – – – – –

2.0 4.0

3.0 4.5

45.5 15 – – – – – – – – –

1.6 3.5

1.6 47.0 15 3.5 – – – – – – – – –

1.3 47.5 15 3.5 – – – – – – – – –

5E 302

303

304

305

306/308

310/312/316

314

318/322

320/324

330/336/340/344/348

181www.lemo.com

®®

Cable stripping lengths for multipole connectors (E series)

elbow plugs (90°) with cable collet, clamping type C (solder contacts)

M3

straight plugs and sockets with cable collet, clamping type C (solder contacts)

M1

S

T

L

Cable stripping lengths (mm)

M1 M3

Solder Solder

L S T L S T

Type

ø contact A

(mm)

6.0 70 30 9.0 – – –

8.0 70 30 10.0 – – –

5.0 70 30 8.0 – – –

3.0 70 30 6.0 – – –

2.0 70 30 7.0 – – –

1.3 4.0

70 30 – – –

5.0 8.0

1.6 70 30 4.5 – – –

1.3 70 30 4.0 – – –

0.9 70 30 4.0 – – –

6E

303

304

312

316/320/324

330/332/340/348

336

360/362

364/372

106

straight plugs and sockets with oversize cable collet, clamping type K (solder or crimp contacts)

M2

S

T

L

Cable stripping lengths (mm)

M2

Solder Crimp

L S T L S T

Type

ø contact A

(mm)

1.3 23.5 8 3.5 28 8 4.0

0.9 23.0 8 3.0 28 8 4.0

0.9

23.0 8 3.0 28 8 4.0

0.7

0.7 23.5 8 3.0 28 8 4.0

1E

302

303/304

305

306

1.6 26.0 9 3.5 31 9 5.5

1.3 26.5 9 3.5 31 9 4.0

1.3 3.5

26.5 9 31 9 4.0

0.9 3.0

0.9 26.0 9 3.0 31 9 4.0

2E

302

303/304/305/306

307

308/310

2.0 34.0 9 4.0 – – –

2.0 4.0

34.0 9 – – –

1.3 3.5

1.3 34.5 9 3.5 – – –

0.9 34.0 9 3.0 – – –

3E

302/303/304

305

306/307/308/310

312/313/314/316/318

4.0 50.0 9 7.0 – – –

3.0 48.5 9 4.5 – – –

3.0 4.5

48.5 9 – – –

2.0 4.0

2.0 49.0 9 4.0 – – –

2.0 4.0

49.0 9 – – –

1.3 3.5

1.3 49.5 9 3.5 – – –

0.9 49.0 9 3.0 – – –

4E

302

303/304

305

306

307

308/309/310/312/313/314

316/318/320/322/324

182 www.lemo.com

®®

Outer shell

Brass

In most cases, LEMO connectors have a brass outer shell

which is suitable for most general purpose applications,

including civilian and military. The brass outer shells have

a chrome nickel-plated surface which ensures very good

protection against industrial atmosphere, salt air and most

corrosive agents.

Alternative protective coatings are available to satisfy other

specific environmental conditions:

– electrolytic nickel

– nickel-gold

– nickel-black chrome. After the black chrome treatment,

the part is coated with non conductive protective organic

film.

Stainless steel

For applications where there are severe environmental con-

ditions that may rapidly damage the surface finish, we rec-

ommend using stainless steel. The AISI 303 stainless steel

is a material for general use adapted to most applications

requir ing a product made entirely of stainless metal.

For the nuclear industry where elements are subject to

radiation and to vaporous nitric acid, we offer AISI 304

stainless steel.

Grade AISI 316L is recommended for medical applications,

highly demanding with regard to non-corrosiveness. This

mater ial is also used for connector shells soldered by

electronic beam onto a device made of the same stainless

steel. These parts have no surface treatment.

Aluminium alloy

The aluminium alloy outer shells find numerous applications

where light weight is a predominant factor; such as in the

aeronautics and space industries, and for portable and

mobile equipment.

These materials have high mechanical strength and excellent

resistance to corrosion. The shell surface is protected by

anodizing which is available in six colours: blue, yellow,

black, red, green, and natural.

Technical characteristics

Plastic materials

Some connector model shells can be made of plastic. This

solution offers optimum electrical insulating properties

particularly suitable for medical applications. Black Poly-

oxymethylene (POM) is particularly adapted to products of

the 00 or S series.

Grey or white polysulfone (PSU) and beige PEEK offers

excellent mechanical properties and is suitable for gas or

vapour sterilization.

Some models of the 2B and 3B series are available with

an outer shell of cream-coloured polyphenylsulfone (PPSU).

We recommend this material particularly for applications

where products are to withstand hundreds of vapour

sterilization cycles.

Bridge plug or plugs with parallel sockets are made of

polyamide (PA.6) available in 9 colours: blue, white, grey,

yellow, brown, black, red, orange and green.

Some elbow socket shells for printed circuits are overmoulded

in polyphenilene sulfide (PPS).

Other metallic components

In general, most metallic components are manufactured in

brass. However, bronze or beryllium copper are used where

good elasticity is required (for example: earthing crown).

Depending on the application, these parts have electrolytic

nickel or nickel-gold plating.

These parts can also be manufactured in stainless steel.

Sealing gasket

In general, sealing gaskets are made of silicone rubber

MQ/MVQ. However, for vacuumtight sockets and couplers,

gaskets are made of fluorosilicone rubber (FPM).

Sealing resin

An epoxy resin is used to seal both watertight and vacuumtight

socket and coupler models.

183www.lemo.com

®®

Component

Outer shell,

collet nut, conical nut

or notched nut and oversized collet

Earthing crown

Latch sleeve

Locking washer

Hexagonal or round nut

Other metallic components

O-ring and gaskets

Sealing resin

Material (Standard)

Brass (UNS C 38500)

Stainless steel (AISI 303, 304 or 316L)

Aluminium alloy (AA 6262A or AA 6023)

POM (Delrin®or Ertacetal®), Polyoxymethylene, black

PEEK, Polyether ethercetone, beige

PSU (Udel®), Polysulfone, grey or white

PPSU (Radel®), Polyphenylsulfone, cream

PA.6 (Grilon®), Polyamid

PPS (Ryton®), Polyphenilene sulfide, brown

Bronze (UNS C 54400) or special brass

Beryllium Copper (UNS C 17300)

Stainless steel (AISI 416 or 316L)

Special brass

Stainless steel (AISI 416 or 316L)

Bronze (UNS C 52100)

Brass (UNS C 38500)

Stainless steel (AISI 303, 304 or 316L)

Aluminium alloy (AA 6262A or AA 6023)

Brass (UNS C 38500)

Stainless steel (AISI 303, 304 or 316L)

Silicone MQ/MVQ or FPM/FKM (Viton®)

Epoxy (Araldite®or Stycast®)

0.5 3 0.3 0.5 3 0.5 3 0.5 1

2

without treatment

– – – – 5 – – – – – 1)

anodized

– 2)

– 3)

– 4)

– 5)

– 6)

– – – 0.5 3 0.5 3 1.0 – – 7)

– – – 0.5 3 0.5 3 1.0 – – 8)

without treatment 9)

0.5 3 0.3 0.5 3 0.5 3 0.5 –

–

without treatment 9)

– – – 0.5 3 0.5 3 0.5 – –

without treatment 10)

anodized natural 10)

– – – 0.5 3 0.5 3 0.5 – –

without treatment

– 11)

–

Surface treatment (µm)

chrome nickel gold black chr.

Cu Ni Cr Cu Ni Cu Ni Au Ni Cr

Notes: standards for surface treatment are as follows:

– chrome-plated: SAE AMS 2460

– nickel-plated: SAE AMS QQ N 290, or MIL DTL 32119

– gold-plated: ISO 27874

– black chrome: MIL DTL 14538 with a minimum of 10 µm of lacquer protection

1) anthracite colour (other colours upon request)

2) for FFP, PCP and ERN models of the 0S to 3S series

3) for FFP, PCP and ERN models of the 0S to 3S series and FGG and ENG models of the 1B, 3B and 4B series

4) for the FGY and ENY models of the 2B and 3B series

5) for bridge plugs of the B series

6) for S and B series elbow sockets for printed circuits

7) gold-plating for unipole types

8) used in 00 series free and fixed sockets and couplers

9) AISI 416 steel is used with shells made of AISI 303 or 304

10) delivered with free and fixed sockets with aluminium alloy or stainless steel shell

11) FPM/FKM (Viton®) o-ring and gaskets are installed upon special request. However standard for vacuumtight models.

Materials and Treatments

Notes

184 www.lemo.com

®®

Type

Density

Tensile strength (at 23°C)

Flexurale strength (at 23°C)

Dielectric strength

Volume resis. at 50% HR and 23°C

Surface resistivity

Thermal conductivity

Comparative tracking index

Maxi. continuous service temperature

Min. continuous service temperature

Max. short-time service temperature

Water absorption in 24h at 23°C

Radiation resistance

Flammability rating

Resistance to steam sterilization

ASTM D 792 – 1.4 1.3-1.4 1.24 1.3 1.67 1.14 ~ 1.2 ~1.9 1.58

ASTM D 638/ ISO R527 MPa 70-80 92-142 70 70 121 55 > 9 > 12 16

ASTM D 790/ ISO R178 MPA – 170 106 91 179 75 – – 24

ASTM D 149/IEC 60243 kV/mm 60 19-25 17-20 15 17 35 18-30 – 15

ASTM D 257/IEC 60093 Ω lcm 1015 1016 5x1016 – 1016 1015 1014 – 1014

ASTM D 257 Ω 1013 1015 – – – – – – –

ASTM C 177 W/K lm 0.31 0.25 0.26 – 0.3 – – – 0.8

IEC 60112 V CTI 600 CTI 150 CTI 150 – CTI 200 CTI 600 – – CTI>600

UL 746 °C 90 250 140 180 220 80 200 200 80

UL 746 °C -50 -55 -60 -50 -60 -40 -50 -20 -20

– °C 140 300 160 200 250 150 > 250 300 120

ASTM D 570/ISO R62A % 0.85 0.12 0.3 0.37 < 0.05 > 3 – – 0.25

– Gy1) 8x103

107

105 – > 107

5x103 105

8x104 2x106

ASTM D 635/UL 942) – HB V-0/3.2 V-0/4.4 V-0/1.6 V-0/5V V-2 – – V-0/4

– – bad excel. good excel. excel. bad good good bad

Standard Units POM PEEK PSU PPSU PPS PA.6 Silicone FPM Epoxy

Notes: 1) 1 Gy (Gray) = 100 rad. 2) Depends on material thickness (in mm).

Technical characteristics of plastic materials

ASTM = American Society for Testing Material

ISO = International Standards Organisation

UL = Underwriters Laboratories

IEC = International Electrotechnical Commission

185www.lemo.com

®®

Mechanical latching characteristics

Fv: average latching force.

Fd: average unmating force with axial pull on

the outer shell.

Fa: average pull force with axial pull on the collet nut

Notes: forces were measured on outer shells not fitted with contacts.

Mechanical endurance: 5000 cycles (3000 cycles for T series).

The values were measured according to the standard IEC 60512-7 test 13a.

1N = 0.102 kg.

Fv

Fd

Fa

Series

00 0S 1S 2S 3S 4S 5S 6S

Standard series

Series

0E 1E 2E 3E 4E 5E 6E

Series

00 0B 1B 2B 3B 4B 5B

Series

TT 0K 0T 1K 1T 2K 2T 3K 3T 4K 5K

The electromagnetic compatibility of a device can only be

ensured by meeting a number of basic rules with the design

of the device and by carefully selecting components, cables

and connectors.

Electrical and electronic devices are to be designed to ensure

the following:

a) reduce the emission of generated electromagnetic

disturbance to a level where radios and telecommunication

and other devices can properly function;

b) electromagnetic immunity against electromagnetic

disturbance so that they can properly function.

When selecting a connector, screen or shielding efficiency

and low resistance to electric continuity between the cable

and the connector should be considered.

The design of LEMO connectors with metal shell and earth-

ing crown guarantee optimum shielding efficiency in all

applications where electromagnetic compatibility (EMC) is

critical. The performance of a connector is measured through

shielding efficiency, a value that represents the ratio between

the electromagnetic field on the outside and the inside of

the shell. Our measurements are carried out according to

the IEC 60169-1-3 standard.

Electromagnetic compatibility (EMC)

and shielding efficiency

10 K

20 K

50 K

100 K

1 M

2 M

5 M

10 M

20 M

50 M

100 M

200 M

500 M

1 G

200 K

500 K

FGG + PHG.1B

-35

-30

-25

-20

-15

-10

-5

0

5

110

100

90

80

70

60

50

40

30

(dBOhm) (dB)

(Hz)

FGG + PHG.1K

The performance of S and B series connectors is compa-

rable to the results of measurements carried out on a pair

of FGG + PHG.1B connectors.

The performance of E and K series connectors is compa-

rable to the results of measurements carried out on a pair

of FGG + PHG.1K connectors.

Transfer impedance

Shielding efficiency

Frequency

Force

(N)

Fv

Fd

Fa

9 14 15 17 20 40 60 70

7 9 10 11 14 25 40 55

120 140 250 350 500 650 750 900

Watertight series

Force

(N)

Fv

Fd

Fa

14 16 20 32 65 85 100

9 10 13 25 40 60 75

250 300 400 550 700 800 900

Keyed series

Force

(N)

Fv

Fd

Fa

9 10 14 15 17 39 48

7 8 11 12 14 38 38

100 180 300 300 400 600 800

Keyed watertight series

Force

(N)

Fv

Fd

Fa

14 14 15 16 16 20 20 32 28 65 85

12 9 13 10 14 13 15 25 24 40 60

80 250 130 300 250 400 250 550 400 700 800

186 www.lemo.com

®®

Values with earthing crown and latch sleeve or inner-sleeve nickel-

plated.

Values with gold-plated earthing crown and nickel-plated latch sleeve

or inner sleeve.

mV

A G

Shell electrical continuity:

(measured according to IEC 60512-2 test 2f) R1

R2

Test current: 1A

A = Ammeter

mV = Millivoltmeter

G = Generator

Standard series

mV

A G

Keyed series

mV

A G

Watertight series

Keyed watertight series

Series

00

0S

1S

2S

R1

(mΩ)

3.5

2.8

2.2

1.8

R2

(mΩ)

2.8

1.6

1.5

1.2

Series

3S

4S

5S

6S

R1

(mΩ)

1.6

1.4

1.0

R2

(mΩ)

1.2

1.0

0.5

Series

00

0B

1B

XB

2B

3B

4B

5B

R1

(mΩ)

3.5

2.5

2.2

1.5

Series

TT

0T

1T

2T

3T

4T

5T

R1

(mΩ)

3.5

2.5

2.2

1.5

R2

(mΩ)

2.8

1.3

1.1

0.9

0.7

0.5

0.3

Series R1

(mΩ)

R2

(mΩ)

0E-0K

1E-1K

2E-2K

3E-3K

4E-4K

5E-5K

6E

2.8

2.2

1.8

1.6

1.4

1.0

1.6

1.5

1.2

1.0

0.5

187

www.lemo.com

®

Radiation resistance

PA 6.6

PEEK

PTFE

FEP

PI

Damage Minimum to slight (almost available usable)

Slight to medium (often satisfactory)

Medium to serious (not usable)

Insulator

Plastic material used by LEMO for manufacturing insulators

is selected according to the electric and thermal properties

required for the various connector types.

Characteristics examined for the two connector types are:

Dielectric strength, Comparative tracking index,

Surface and volume resistivity, Radiation resistance,

Continuous service temperature, Water absorption,

Flammability rating, Resistance to hydrocarbon.

Mechanical and Electrical Properties

Mechanical characteristics of thermoplastics, such as PA

6.6, and PEEK, are improved by the addition of glass fibres.

By adding glass fibres in the resin the performance of this

material (mechanical strength and radiation resistance) is

enhanced and water absorption rate is reduced. From an

electric point of view, the addition of glass fibres improves

dielectric strength.

Selection of the insulator

A number of thermoplastics have common characteristics,

some of them are identical with other insulating materials.

In this case, the insulator material is selected according to

the specific difference in features to provide all the required

parameters for the given type.

Note: technical data in this chapter provide general information on plastics

used by LEMO as electrical insulators. LEMO reserves the right to propose

new materials with better technical characteristics, and to withdraw, without

notice, any material mentioned in the present catalogue or any other

publications edited by LEMO S.A. and/or its subsidiaries. LEMO SA and

its subsidiaries use only plastic granules, powder or bars supplied by

specialized companies, and thus cannot in any case take responsibility

with regard to this material.

103 104 105 106 107 108 109 1010

101 102 103 104 105 106 107 108

Radiation dose γ

rads

Gray (Gy)

Type

Dielectric strength

Volume resistivity at 50% RH and 23°C

Surface resistivity

Thermal conductivity

Comparative tracking index

Dielectric constant (106Hz)

Dissipation factor (106Hz)

Maximum continuous service temperature

Maximum short-time service temperature

Minimum continuous service temperature

Water absorption in 24h at 23°C

Radiation resistance

Flammability rating

ASTM D 149 / IEC 60243 kV/mm 15-17 19-25 17.2-24 20 22

ASTM D 257 / IEC 60093 Ω lcm 5.8x1015 1016 1018 > 1016 > 1016

ASTM D 257 / IEC 60093 Ω 1012 1015 1017 > 1016 > 1015

ASTM C 177 W/K lm 0.21 0.25 0.23 0.24 0.35

IEC 60112 V CTI 600 CTI 150 CTI 500 – –

ASTM D 150 / IEC 60250 – 4 3.2-3.5 2-2.1 2.1 3.6

ASTM D 150 / IEC 60250 – – < 0.005 < 0.0003 < 0.001 < 0.0034

UL 746 °C 120 250 260 200 350

– °C 150 300 300 260 480

– °C – -55 -200 -200 –

ASTM D 570 / ISO R624 % < 0.7 < 0.3 < 0.01 < 0.01 0.24

– Gy 5x103 107 2x102 2x104 106

ASTM D 635 / UL 94 – – V-0/3.2 V-0 V-0 –

Standard Units PA6.6 PEEK PTFE FEP PI

Technical characteristics

Designation

chemical commercial

Polyamide (glass fitted) Nylatron®

Polyether Ethercetone Peek®

Polytetrafluorethylene –

Tetrafluorethylene –

Polyimide Vespel®

PA 6.6 – l l

PEEK –

l

l l

l

l l l l l

PTFE ASTM D 1457-83 l l l

FEP ASTM D 2116-81

l l

PI –

l l

Unipole Multipole

00 S E 00 S E B K T

Symbol Standard

l

First choice alternative

l

Special order alternative

Note: values of insulation resistance between contacts are given on page 189.

188 www.lemo.com

®®

Brass – 33) –

Bronze (UNS C 54400)

0.5 3 1.5

Cu-Be (FS QQ-C-530)

Electrical contact

Technical description

The secure reliable electromechanical connection achieved

with LEMO female cylindrical contacts is mainly due to

two important design features :

1. Prod proof entry on the mating side which ensures

perfect concentric mating even with carelessly handled

connectors.

2. The pressure spring, with good elasticity, maintains a

constant even force on the male contact when mated.

The leading edge of the pressure spring preserves the

surface treatment (gold-plated) and prevents undue

wear.

Contact material and treatment

Type

Male crimp

Male print

Surf. treatment (µm)

Material (standard)

Cu Ni Au1)

Brass (UNS C 34500) 0.5 3 1.0

Brass (UNS C 38500) 0.5 3 1.0

Female crimp / print

Au

Ni

Cu

Bronze

or brass

Notes: the standard surface treatment are as follows:

– nickel: SAE AMS QQ N 290 or MIL DTL 32119

– gold: ISO 27874.

1) minimum value

2) for elbow print contacts

3) treatment completed by 6 µm Sn (lead free) tin-plating

LEMO female contacts are made of bronze beryllium (QQ-

C-530) or bronze (UNS C 54400). These materials are chosen

because of their high modulus of elasticity, their excellent

electrical conductivity and a high mechanical strength.

LEMO male solder and print contacts are made of brass

(UNS C 38500). Male crimp contacts are made of brass

(UNS C 34500) or annealed brass (UNS C 38500) with

optimum hardness (HV) for crimping onto the wire.

Gold thickness

female

outside inside

(µm) (%)

1.0 1.5 65

1.0 1.5 70

1.0 1.5 75

Note: P = inspection point

male

(µm)

2.5

P

Contact

ø A

(mm)

Notes: 1) contacts are silver plated

Thickness comparison between the outside and the inside of female contacts

0.35

0.50

0.70

0.90

1.30

1.60

2.00

Gold thickness

female

outside inside

(µm) (%)

1.0 1.5 75

– – –

male

(µm)

Contact

ø A

(mm)

3.00

4.00

5.00

6.00

8.00

12.001)

Cu-Be (FS QQ-C-530) – – –

Stainless steel – – –

Clips

Connection wire2)

189www.lemo.com

®®

Crimp contacts

12

Advantages of crimping

Solder contacts

The conductor bucket of these contacts is machined at an

angle to form a cup into which the solder can flow.

See page 8 for the range of cable dimensions that can be

soldered.

Contact resistance (mΩ)

1000 3000 5000

cycles cycles cycles

8.0 – –

7.5 8.3 8.7

5.6 5.7 6.1

4.1 4.2 4.8

2.8 2.9 3.6

2.9 3.1 3.5

2.6 2.7 3.3

Contact resistance with relation to the number

of mating cyles

(measured according to IEC 60512-2 test 2a)

Average values measured after the mating cycles and

the salt spray test according to IEC 60512-6 test 11f.

Insulation resistance between the contacts

and contact/shell

(measured according to IEC 60512-2 test 3a)

A ø

(mm)

0.35

0.5

0.7

0.9

1.3

1.6

2.0

Contact resistance (mΩ)

1000 3000 5000

cycles cycles cycles

2.0 2.2 3.1

1.6 2.0 2.8

1.4 – –

1.2 – –

0.8 – –

0.7 – –

A ø

(mm)

3.0

4.0

5.0

6.0

8.0

12.0

Multipole Unipole

PEEK PTFE

> 1012 Ω > 1012 Ω

> 1010Ω > 1010Ω

Insulating material

new

after humidity test1)

3

Crimp contacts are available in standard version (form 1)

for mounting maximum size conductors.

For some dimensions, these crimp contacts can be produced

with reduced crimp barrels (form 2) for mounting reduced

size conductors.

Note: 1) 21 days at 95% RH according to IEC 60068-2-3.

The square form crimp method is used (MIL-C-22520F,

class I, type 2) photo 1 for unipole contacts.

For multipole contacts the standard four identer crimp

method is used, MIL-C-22520F, class I, type 1), photo 2.

The crimp method requires a controlled compression to

obtain a symmetrical deformation of the conductor strand

and of the contact material. The radial hole in the side of

the contact makes it possible to check whether the conductor

is correctly positioned within the contact. A good crimping

is characterized by only slightly reduced conductor section

and practically no gap.

For optimum crimping of bronze or brass contacts they are

annealed to relieve internal stress and reduce material

hardening during the crimping process.

Only the crimping zone is annealed with the help of an

induction heating machine designed by the LEMO Research

and Development Department (see photo 3).

– practical, quick contact fixing outside the insulator

– possible use at high temperature

– no risk of heating the insulator during the conductor-

contact fixing

– high tensile strength

Crimp contacts

Fig. 1 Fig. 2

The crimp contacts can be with two forms: a standard crimp

barrel for large conductors (see fig. 1) or with a reduced

crimp barrel for smaller conductors (see fig. 2).

The range of cable dimensions that can be crimped into

our contacts are indicated on the table on page 8.

190 www.lemo.com

®®

Test voltage (Ue) :

(measured according to the IEC 60512-2 test 4a standard)

It corresponds to 75% of the mean breakdown voltage.

Test voltage is applied at 500 V/s and the test duration is

1 minute.

This test has been carried out with a mated plug and socket,

with power supply only on the plug end.

Operating voltage (Us) :

It is proposed according to the following ratio : Us =

Caution:

For a number of applications, safety requirements for

electrical appliances are more severe with regard to

operating voltage.

In such cases operating voltage is defined according

to creepage distance and air clearance) between live parts.

Please consult us for the choice of a connector by indi-

cating the safety standard to be met by the product.

Voltage values are given in the table on insulator types for

each series.

They correspond with values measured at sea level.

They are adapted to all applications up to an altitude of

2000 m.

In case a device is used at a higher altitude, air clearance

between live parts has to be multiplied by the following

coefficients.

It means also that test voltage has to be divided by this

coefficient.

Print contacts

straight elbow

Print contacts are available in straight or elbow versions

for certain connector types, mostly for straight and elbow

socket models. Connection is made on flexible or rigid

printed circuits by soldering.

Straight print contacts are gold-plated which guarantees

optimum soldering, even after long-term storage. However

for wave soldering, we recommend removal the gold-plating

from the contact end on the printed circuit side before

soldering according to the assembly procedures.

Print elbow contacts include a tinned lead free brass wire

crimped into a crimp contact.

Ue

3

(measured according to IEC 60512-3 test 5a)

The specified rated current can be applied simultaneously

to all the contacts.

It corresponds with an average temperature rise of 40°C

of the connector.

The current values are indicated in the table of insulator

types in each series.

For use at higher temperatures acceptable rated current

will be lower. It tends towards zero as the material is used

at the maximum operating temperature accepted for the

insulator.

In most case the current depend on the conductor dimension

(see table on page 196) or on the printed circuit dimension.

Caution:

In general, connectors should not be unmated while

live.

Test voltage

0

50

25%

50%

75%

100%

100 150 200 250

T (°C)

Rated current

For connectors with PEEK insulator, maximum admissible

current will follow the curve below depending on the operating

temperature T.

Rated current (A)

Maximum operating temperature

for the insulator

coefficient

1.00

1.14

1.29

1.48

altitude (m)

2000

3000

4000

5000

191www.lemo.com

®®

Notes:

1) standards for surface treatment are as follows:

– nickel-plated: SAE AMS QQ N 290.

2) available upon special request.

Cable fixing

Cables are fixed into LEMO connectors with cable collet systems. These collets with latches have a design which is very

similar to those used for tool machines. This solution guarantees excellent cable retention and ensures perfectly symmetrical

deformation of the cable.

The 00 multipole series is also available with hexagonal crimping (MIL-C-22520F).

Component

Center piece

Collet

Crimp ferrule

Reducer

Reducing cone

Earthing cone

Metal washer

Material and treatment

Surface treatment (µm)

Material (standard) Nickel1) Gold

Cu Ni Cu Ni Au

Brass (UNS C 38500) 0.5 3 – – –

Copper (UNS C 18700) 0.5 3 0.5 3 0.5

Brass (UNS C 38500) 0.5 3 – – –

Gasket

Silicone MQ/MVQ –

FPM (Viton®)2) –

65

1

7

3 24 1

5

7

6

3

65

8

9

7

B series (D and M cable clamping)

See assembly instructions under www.lemo.com.

Cable clamping system

Type D

Type M

Plug and socket

¿ collet nut

¡ reducing cone

¬ collet

√ reducer

ƒ split insert carriers

≈ insulator + contacts

∆ housing subassy.

Elbow plug

¿ collet nut

¡ reducing cone

¬ collet

√ reducer

ƒ elbow outlet

≈ insert carrier

∆ insulator + contacts

« housing subassy.

» hex cap

192 www.lemo.com

®®

65

1

7

1

76

4 3 2

5

4 3 2

7

1

5

1

6

7

6

5

8

9

K series (C and K cable clamping)

See assembly instructions under www.lemo.com.

Type C

54

732

1

6

Type K

Plug and socket

¿ collet nut

¡ collet

¬ flexible gasket

√ earthing cone

ƒ split insert carriers

≈ insulator + contacts

∆ housing subassy.

Elbow plug

¿ collet nut

¡ collet

¬ flexible gasket

√ earthing cone

ƒ split insert carrier

≈ elbow inner shell

∆ insulator + contacts

« hex cap

» housing subassy.

Plug and socket

¿collet nut

¡collet

¬flexible gasket

√earthing cone

ƒsplit centre-pieces

≈insulator + contacts

∆housing subassy.

w. oversized back

T series (C cable clamping)

See assembly instructions under www.lemo.com.

Plug and socket

¿ collet nut

¡ collet

¬ flexible gasket

√ earthing cone

ƒ split insert carriers

≈ insulator + contacts

∆ housing subassy.

Type C

193www.lemo.com

®®

P ● ●

F ● ●

1

7

1

6

62

4

5

32

5

6

8

7

FLA

45

2

1

6

S series (C, L and K cable clamping)

See assembly instructions under www.lemo.com.

Type K

Type L*

Type C

Plug and socket

¿collet nut

¡collet

¬oversize collet

housing (type K)

√earthing

centre-piece (type C)

ƒsplit centre-pieces

(type K and C)

≈insulator + contacts

∆housing subassy.

Elbow plug

¿collet nut

¡collet

√threaded sleeve

ƒbracket

≈insulator + contacts

∆insulating sleeve

«housing subassy.

* «L» type collet does not allow to connect the screen to

the connector shell. It does not allow full EMC shielding.

8

32

1

7

4

32

4

1

8

7

9

FLA

6

5

8

5

6

5

6

1

E series (C and K cable clamping)

See assembly instructions under www.lemo.com.

Type K

Type C

Plug and socket

¿collet nut

¡collet

¬flexible gasket

√earthing cone

ƒsplit centre-pieces

(type K)

ƒearthing

centre-piece (type C)

≈oversize collet

housing (type K)

≈earthing

centre-piece (type C)

∆insulator + contacts

« housing subassy.

Elbow plug

¿collet nut

¡collet

¬flexible gasket

√earthing cone

ƒsplit insert carrier

≈elbow inner shell

∆insulator + contacts

« hex cap

» housing subassy.

194 www.lemo.com

®®

Maximum metal collet nut tightening torque

Standard series

Series

00 0S 1S 2S 3S 4S 5S 6S

0.25 0.5 1.5 2.5 3 8 10 12

Torque (Nm)

Watertight series

Series

0E 1E 2E 3E 4E 5E 6E

0.7 0.8 2 3 5 8 12

Torque (Nm)

Keyed series

Series

00 0B 1B XB 2B 3B 4B 5B

0.25 0.5 1.5 2.0 2.5 4 7 10

Torque (Nm)

Watertight keyed series

Torque (Nm)

Maximum plastic collet nut tightening torque 1)

Series

00 0S 1S 2S 3S 1B 2B 3B 4B

0.15 0.45 0.50 0.50 1.00 0.50 0.50 1.00 1.50

Torque (Nm)

Note:

1)For applications subject to strong vibration, we recommend fixing the collet nut

with epoxy resin. We recommend to tight to the maximum value. Optimal torque

may depend on cable jacket design.

Maximum elbow plug hex cap tightening torque

Watertight series

Series

0E 1E 2E 3E 4E 5E

0.8 1 1.2 1.5 3 5

Torque (Nm)

Keyed series

Series

00 0B 1B 2B 3B 4B 5B

0.2 0.25 0.5 0.5 1.5 3 5

Torque (Nm)

Watertight keyed series

Series

0K 1K 2K 3K 4K 5K

0.8 1 1.2 1.5 3 5

Torque (Nm) 1N = 0.102 kg

Series

TT 0K 0T 1K 1T 2K 2T 3K 3T 4K 5K

0.25 0.7 0.7 0.8 0.8 2 2 3 3 5 8

195www.lemo.com

®®

Table of American Wire Gauge

AWG

Construction ø wire max Wire section

(mm) (in) (mm2) (sq in)

Strand AWG/

nb strand

Technical tables

Note: 1) not included in the standard

0

1

2

4

6

8

10

12

12 1)

12

14

14 1)

14

16 1)

16

16 1)

16

18 1)

18

259 24 11.277 0.444 52.90 0.0820

817 30 9.702 0.382 41.40 0.0641

259 26 8.89 0.35 33.20 0.0514

133 25 6.9596 0.274 21.5925 0.0335

133 27 5.5118 0.217 13.5885 0.0211

168 30 4.4450 0.175 8.5127 0.0132

133 29 4.3942 0.173 8.6053 0.0133

105 30 3.3020 0.13 5.3204 0.0082

37 26 2.9210 0.115 4.7397 0.0073

1 10 2.6162 0.103 5.2614 0.0082

37 28 2.3114 0.091 2.9765 0.0046

19 25 2.3622 0.093 3.0847 0.0048

7 20 2.5400 0.10 3.6321 0.0056

1 12 2.0828 0.082 3.3081 0.0051

41 30 2.0574 0.081 2.0775 0.0032

19 27 1.8542 0.073 1.9413 0.0030

7 22 2.0828 0.082 2.2704 0.0035

1 14 1.6510 0.065 2.0820 0.0032

65 34 1.5748 0.062 1.3072 0.0020

26 30 1.5748 0.062 1.3174 0.0020

19 29 1.4986 0.059 1.2293 0.0019

7 24 1.5494 0.061 1.4330 0.0022

1 16 1.3208 0.052 1.3076 0.0020

65 36 1.2700 0.05 0.8234 0.0013

42 34 1.2700 0.05 0.8447 0.0013

19 30 1.3208 0.052 0.9627 0.0015

16 30 1.2954 0.051 0.8107 0.0013

7 26 1.2700 0.05 0.8967 0.0014

1 18 1.0414 0.041 0.8229 0.0013

AWG

Construction ø wire max Wire section

(mm) (in) (mm2) (sq in)

Strand AWG/

nb strand

20 1)

20

22

24 1)

24

26

28 1)

28

30

32

34

36

38

40

42 36 1.0160 0.04 0.5320 8.2x10-4

19 32 1.0414 0.041 0.6162 0.0010

10 30 1.0160 0.04 0.5067 7.9x10-4

7 28 0.9906 0.039 0.5631 8.7x10-4

1 20 0.8382 0.033 0.5189 8.0x10-4

19 34 0.8382 0.033 0.3821 5.9x10-4

7 30 0.7874 0.031 0.3547 5.5x10-4

1 22 0.6604 0.026 0.3243 5.0x10-4

42 40 0.6604 0.026 0.2045 3.2x10-4

19 36 0.6858 0.027 0.2407 3.7x10-4

7 32 0.6350 0.025 0.2270 3.5x10-4

1 24 0.5588 0.022 0.2047 3.2x10-4

19 38 0.5588 0.022 0.1540 2.4x10-4

7 34 0.5080 0.02 0.1408 2.2x10-4

1 26 0.4318 0.017 0.1281 2.0x10-4

19 40 0.4318 0.017 0.0925 1.4x10-4

7 36 0.4064 0.016 0.0887 1.4x10-4

1 28 0.3302 0.013 0.0804 1.2x10-4

7 38 0.3302 0.013 0.0568 8.8x10-5

1 30 0.2794 0.011 0.0507 7.9x10-5

7 40 0.2794 0.011 0.0341 5.3x10-5

1 32 0.2286 0.009 0.0324 5.0x10-5

1 34 0.1693 0.007 0.0201 3.1x10-5

1 36 0.127 0.005 0.0127 2.0x10-5

1 38 0.1016 0.004 0.0081 1.3x10-5

1 40 0.078 0.003 0.0049 7.5x10-6

196 www.lemo.com

®®

0.08

0.14

0.25

0.34

0.50

0.75

1.00

1.50

2.50

Maximum current rating for conductor

Maximum current on insulated conductors up to an ambiant temperature of 30° C (from VDE 0100, parts 430 and 532 as

well as other VDE regulations).

Group 2 Group 3

Intens. Intens.

max. A max. A

Nominal

section

mm2

1.0 1.5

2.0 3.0

4.0 5.0

6.0 8.0

9.0 12.0

12.0 15.0

15.0 19.0

18.0 24.0

26.0 32.0

Group 2 Multi-conductor, e. g. solid cable under sheath, shielded cable, lead-sheath cables, …

Group 3 Single conductor and single conductor cable laid on open air in a way to leave at least a

space between them equal to their diameter

Table of wire gauges according to IEC-60228 standard

Conductor no

x Ø (mm) Max Ø Max Ø Section Section

(mm) (in) (mm2) (sq in)

196x0.40

7x2.14

125x0.40

7x1.72

1x4.50

80x0.40

7x1.38

1x3.60

84x0.30

7x1.50

1x2.76

56x0.30

7x0.86

1x2.25

50x0.25

7x0.68

1x1.78

30x0.25

7x0.52

7.50 0.295 25.00 0.0387

6.10 0.240 25.00 0.0387

6.00 0.236 16.00 0.0248

4.90 0.192 16.00 0.0248

4.50 0.177 16.00 0.0248

4.70 0.155 10.00 0.0155

3.95 0.155 10.00 0.0155

3.60 0.141 10.00 0.0155

3.70 0.145 6.00 0.0093

3.15 0.124 6.00 0.0093

2.76 0.108 6.00 0.0093

2.80 0.110 4.00 0.0062

2.58 0.098 4.00 0.0062

2.25 0.082 4.00 0.0062

2.15 0.084 2.50 0.0038

2.04 0.080 2.50 0.0038

1.78 0.070 2.50 0.0038

1.60 0.062 1.50 0.0023

1.56 0.061 1.50 0.0023

Conductor no

x Ø (mm) Max Ø Max Ø Section Section

(mm) (in) (mm2) (sq in)

1x1.40

32x0.20

7x0.43

1x1.15

42x0.15

28x0.20

1x1.00

28x0.15

16x0.20

1x0.80

7x0.25

1x0.60

14x0.15

7x0.20

18x0.10

14x0.10

21x0.07

14x0.10

1.40 0.055 1.50 0.0023

1.35 0.053 1.00 0.0015

1.29 0.050 1.00 0.0015

1.15 0.045 1.00 0.0015

1.20 0.047 0.75 0.0011

1.15 0.045 0.75 0.0011

1.00 0.039 0.75 0.0011

0.95 0.037 0.50 7.7x10-4

0.90 0.035 0.50 7.7x10-4

0.80 0.031 0.50 7.7x10-4

0.75 0.029 0.34 5.2x10-4

0.60 0.023 0.28 4.3x10-4

0.75 0.029 0.25 3.8x10-4

0.65 0.023 0.22 3.4x10-4

0.50 0.019 0.14 2.1x10-4

0.40 0.015 0.11 1.7x10-4

0.40 0.015 0.09 1.3x10-4

197www.lemo.com

®®

Some formulae

Resistance R of a conductor: R = ρl[Ω]

Impedance of coaxial line: Z = llog [Ω]

Signal attenuation: Attenuation = 20 llog [dB]

Where: ρ = conductor resistivity

l = conductor length

A = conductor cross-section

εr = dielectric constant

D = dielectric outer diameter

d = center conductor outer diameter

U1 = input signal voltage

U2 = output signal voltage

l

A

D

d

138

√εr

U1

U2

Conversion of some units:

millimeters into inches: 1 mm = 0.0394 in

inches into millimeters: 1 in = 25.4 mm

centimeters into feet: 1 cm = 0.0328 ft

feet (12 in) into centimeters: 1 ft = 30.48 cm

square centimeters into square inches: 1 cm2 = 0.155 sq in

square inches into square centimeters: 1 sq in = 6.4516 cm2

bar into pounds per square inch: 1 bar = 14.51 psi

bar into Pascal: 1 bar = 105Pa

°C into °F: °F = °Cl1.8 + 32

newtonmeter (Nm) into inch pound (inllb) 1 Nm = 8.85 inllb

mbarllls-1 into Torrllls-1 1 mbarllls-1 = 1.33 Torr llls-1

®®

198 www.lemo.com

PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND

INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.

IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS

SITUATIONS.

1. SHOCK AND FIRE HAZARD

Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue

(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.

Mated components should never be disconnected while live as this may result in an exposed electric arc and local

overheating, resulting in possible damage to components.

2. HANDLING

Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect

components should be rejected or returned to the factory for verification.

Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used

during installation and / or assembly in order to obtain safe and reliable performance.

3. USE

Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general

conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to

eliminate all risk of transmission of such voltages to any exposed metal part of the connector.

4. TEST AND OPERATING VOLTAGES

The maximum admissible operating voltage depends upon the national or international standards in force for the

application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the

catalog however these may be influenced by PC board design and / or wiring harnesses.

The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the

test duration is 1 minute.

5. CE MARKING

CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or

several European safety directives.

CE marking applies to complete products or equipment, but not to electromechanical components, such as

connectors.

6. PRODUCT IMPROVEMENTS

The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior

notification.

7. WARNING (Prop 65 State of California)

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that

cause cancer, birth defects or other reproductive harm. LEMO products are exempt from proposition 65 warnings because

they are manufactured, marketed, and sold solely for commercial and industrial use. For further information, please visit

https://www.lemo.com/quality/LEMO-Prop-65-compliance-declaration.pdf.

Product safety notice

199www.lemo.com

®®

LEMO works constantly to improve the quality of its products; the information and illustrations figuring in this document

may therefore vary and are not binding. In any case, LEMO makes no specific warranty of merchantability, fitness for a

particular purpose, third party components as such or included in assembly, non-infringement, title, accuracy, completeness,

or security. The user is fully responsible for his products and applications using LEMO component.

In no event shall LEMO, its affiliates, officers, agents or employees be liable for any incidental, indirect, special or

consequential damages in connection with the products or services provided by LEMO, including (without limitation) loss

of profits or revenues, interruption of business, loss of use of the products or any associated equipment, materials,

components or products, damages to associated equipment or in combination with other components, materials.

Reproduction of significant portions of LEMO information in LEMO data books or data sheets is permissible only if

reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices.

LEMO is not responsible or liable for such altered documentation. Information of third parties may be subject to additional

restrictions.

Disclaimers

200 www.lemo.com

®®

Notes

No reproduction or use without express permission of editorial or pictorial content, in any manner.

LEMO SA reserves the right to modify and improve specifications, at all times, without any notification.

B S K T E F 00 01 0A 3T 4A 4M 3K.

93C 1D Y 05 5G 2G 2C L H M R N 03 V W T7 P D K/S 01 DIN

LEMO complete product range

Unipole

Multipole

Coaxial 50 Ω

Coaxial 75 Ω

Multi Coaxial

Mixed Coax + LV

Triaxial 50 Ω

Triaxial 75 Ω

Mixed Triax + LV

Quadrax

High Voltage

Multi High Voltage

Mixed HV + LV

Fibre Optic

Multi Fibre Optic

Mixed FO + LV

Thermocouple

Fluidic

Multi Fluidic

Mixed Fluidic + LV

• •

• • • • •

Most frequently used in darker colour • included in this catalogue

B Series Keyed S Series K Series Keyed E Series F Series Keyed 00 Series

01 Series

T Series

0A Series 3T Series 4A Series 4M Series Keyed 3K.93C Series Keyed 1D Series

Y Series 05 Series 5G Series Keyed 2G Series Keyed 2C Series L Series Keyed H Series

M Series Keyed R Series Keyed N Series Keyed 03 Series Keyed V Series W Series Keyed Cable assembly

REDEL T7 Series REDEL P Series Keyed REDEL D Series 01 Series Keyed VAA Series SAA Series TAA Series

LEMO HEADQUARTERS

SWITZERLAND

LEMO SA

Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens

Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com

LEMO SUBSIDIARIES

LEMO DISTRIBUTORS

ARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC,

GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, RUSSIA,

SOUTH AFRICA, SOUTH KOREA, TAIWAN, TURKEY, UKRAINE

www.lemo.com

AUSTRIA

LEMO Elektronik GesmbH

Lemböckgasse 49/E6-3

1230 Wien

Tel: (+43 1) 914 23 20 0

Fax:(+43 1) 914 23 20 11

sales@lemo.at

BRAZIL

LEMO Latin America Ltda

Av. José Rocha Bonﬁm,

214 Salas 224 / 225

Condomínio Praça Capital

Ed. Chicago

Campinas / SP - Brasil 13080-650

Tel: +55 (11) 98689 4736

info-la@lemo.com

CANADA

LEMO Canada Inc

44 East Beaver Creek Road, unit 20

Richmond Hill, Ontario L4B 1G8

Tel: (+1 905) 889 56 78

Fax: (+1 905) 889 49 70

info-canada@lemo.com

CHINA / HONG KONG

LEMO Electronics (Shanghai) Co., Ltd

First Floor, Block E,

18 Jindian Road, Pudong

Shanghai, China, 201206

Tel: (+86 21) 5899 7721

Fax: (+86 21) 5899 7727

cn.sales@lemo.com

DENMARK

LEMO Denmark A/S

Mandal Allé 16A

5500 Middelfart

Tel: (+45) 45 20 44 00

Fax: (+45) 45 20 44 01

info-dk@lemo.com

FRANCE

LEMO France Sàrl

24/28 Avenue Graham Bell

Bâtiment Balthus 4

Bussy Saint Georges

77607 Marne la Vallée Cedex 3

Tel: (+33 1) 60 94 60 94

Fax: (+33 1) 60 94 60 90

info-fr@lemo.com

GERMANY

LEMO Elektronik GmbH

Hanns-Schwindt-Str. 6

81829 München

Tel: (+49 89) 42 77 03

Fax: (+49 89) 420 21 92

info@lemo.de

HUNGARY

REDEL Elektronika Kft

Nagysándor József u. 6-12

1201 Budapest

Tel: (+36 1) 421 47 10

Fax: (+36 1) 421 47 57

info-hu@lemo.com

ITALY

LEMO Italia srl

Viale Lunigiana 25

20125 Milano

Tel: (+39 02) 66 71 10 46

Fax: (+39 02) 37 90 80 46

sales.it@lemo.com

JAPAN

LEMO Japan Ltd

2-7-22, Mita,

Minato-ku, Tokyo, 108-0073

Tel: (+81 3) 54 46 55 10

Fax: (+81 3) 54 46 55 11

lemoinfo@lemo.co.jp

MIDDLE EAST

LEMO Middle East Connectors LLC

Concorde Tower 6th Floor,

Dubai Media City, P.O. Box 126732

Dubai, United Arab Emirates

Tel: +971 55 222 36 77

info-me@lemo.com

NETHERLANDS / BELGIUM

LEMO Connectors Nederland B.V.

Jacques Meuwissenweg 6

2031 AD Haarlem

Tel. +31 23 206 07 01

info-nl@lemo.com

NORWAY / ICELAND

LEMO Norway A/S

Soerumsandvegen 69,

1920 Soerumsand

Tel: (+47) 22 91 70 40

Fax: (+47) 22 91 70 41

info-no@lemo.com

SINGAPORE

LEMO Asia Pte Ltd

4 Leng Kee Road,

#06-09 SiS Building

Singapore 159088

Tel: (+65) 6476 0672

Fax: (+65) 6474 0672

sg.sales@lemo.com

SPAIN / PORTUGAL

IBERLEMO SAU

Brasil, 45, 08402 Granollers

Barcelona

Tel: (+34 93) 860 44 20

Fax: (+34 93) 879 10 77

info-es@lemo.com

SWEDEN / FINLAND

LEMO Nordic AB

Gunnebogatan 30, Box 8201

163 08 Spånga

Tel: (+46 8) 635 60 60

Fax: (+46 8) 635 60 61

info-se@lemo.com

SWITZERLAND

LEMO Verkauf AG

Grundstrasse 22 B, 6343 Rotkreuz

Tel: (+41 41) 790 49 40

ch.sales@lemo.com

UNITED KINGDOM

LEMO UK Ltd

12-20 North Street, Worthing,

West Sussex, BN11 1DU

Tel: (+44 1903) 23 45 43

lemouk@lemo.com

USA

LEMO USA Inc

P.O. Box 2408

Rohnert Park, CA 94927-2408

Tel: (+1 707) 578 88 11

(+1 800) 444 53 66

Fax:(+1 707) 578 08 69

info-US@lemo.com