Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called"TAIYO YUDEN' s official sales channel"). It is only applicable to the products purchased from any of TAIYO YUDEN's official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to"Foreign Exchange and Foreign Trade Control Law"of Japan,"U.S. Export Administration Regulations", and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 12 notice_e-01 CHIP ANTENNAS REFLOW FEATURES APPLICATIONS Compact and Low-profile Bluetooth(R), Wireless LAN, GPS, WiMAX, ZigBee, UWB Wide bandwidth and High Gain Stable temperature characteristics ORDERING CODE A F AH AF 2 1 6 Electrode Code With Plating Blank space 2 4 5 Dimensions (case size)mm 212 2.0x1.25 216 2.5x1.6 816 8.0x1.6 316 3.2x1.6 083 8.0x3.0 104 10.0x4.0 086 8.0x6.0 Type Multilayer Antenna Helical Antenna M 0 0 Special Code Inverted F Mono Pole Mono Pole N (Dual) F M FrequencyMHz 1574.3971576.443 24002500 31008000 1. Describe Center Frequency 2. Lower Frequency for Dualband T T example 1575 2450 5550 1 Packaging Tape & Reel Spec Code 01 S1 Applicable to AH104F EXTERNAL DIMENSIONS/STANDARD QUANTITY AH 212M Type, AF 216M Type, AF 816M Type, AF 116M Type AH 316M Type AH 083F Type AH 104N Type AH 086M Type E AH 104F Type Standard Quantity (pcs) Embossed Tape Type L W T E a b c AF 216M AF 816M AH212M AH 316M AH 083F AH 104F AH 104N AH 086M 2.50.2 80.2 20.3 3.20.15 0.1 80.3 100.3 100.3 80.3 1.60.2 1.60.2 1.250.2 1.60.15 30.3 40.3 40.3 60.3 1.60.2 1.60.2 0.850.2 0.50.1 10.3 10.3 10.3 10.3 0.50.3 0.50.3 0.50.3 0.50.2 3.10.3 2.50.3 30.3 1.80.2 1.0 min. 10.3 10.3 0.80.3 10.3 1.150.3 10.3 1.50.3 2000 4000 3000 1000 2000 1000 Unit : mm (inch) PART NUMBERS Applications GPS W-LAN (2.4GHz Bluetooth(R) WiMAX2.5GHz ZigBee W-LAN 2.4GHz5GHz UWB & WiMAX 3.5GHz Ordering Code AF 816M157502 AH 316M157501 AF 216M245001 AH 212M245001 AH 316M245001 AH 083F245001 AH 104F2450S1 AH 104F2650S1 AH 104N2450D1 AH 086M555003 External Dimensions (mm) 8.0x1.6x1.6 3.2x1.6x0.5 2.5x1.6x1.6 2.0x1.25x0.85 3.2x1.6x0.5 8.0x3.0x1.0 10.0x4.0x1.0 10.0x4.0x1.0 10.0x4.0x1.0 8.0x6.0x1.0 Center Frequency (MHz) 1575 1575 2450 2450 2450 2450 2450 2650 2450/5400 5550 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 190 12 chipantenna01_e-01 ELECTRICAL CHARACTERISTICSTYPICAL CHARACTERISTICS Typical Characteristics on Taiyo Yuden evaluation board AF 816M157502 11 ZX-Plane X Z XY-Plane X -X -Z Y X Bandwidth: 180MHz (VSWR: less than 2) Z -X -Y -Y Y Vertical polarization Vertical polarization 1.325 1.575 1.825 Horizontal polarization -Z Horizontal polarization X Typical characteristics of radiation pattern@1.575GHz Typical characteristics of VSWR AH 316M157501 ZX-Plane X Z XY-Plane X -X -Z X Bandwidth: 90MHz (VSWR: less than 2) -X -Y Z -Y Y Vertical polarization 1.325 1.575 Vertical polarization Horizontal polarization 1.825 -Z Horizontal polarization X Typical characteristics of radiation pattern@1.575GHz Typical characteristics of VSWR AF 216M245001 ZX-Plane X Z XY-Plane X -X -Z Y -X X 440MHz Z -Y Y -Y Vertical polarization Vertical polarization Horizontal polarization -Z HIGH FREQUENCY PRODUCTS Y Horizontal polarization X Typical characteristics of radiation pattern@2.45GHz Typical characteristics of VSWR AH 212M245001 ZX-Plane X Z XY-Plane X -X -Z Y X Bandwidth: 260MHz (VSWR: less than 2) 1950 2450 2950 Typical characteristics of VSWR -X -Z Z Y -Y Vertical polarization Horizontal polarization -Y Vertical polarization Horizontal polarization X Typical characteristics of radiation pattern@2.45GHz This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. chipantenna01_e-01 12 191 ELECTRICAL CHARACTERISTICSTYPICAL CHARACTERISTICS Typical Characteristics on Taiyo Yuden evaluation board AH 316M245001 ZX-Plane X Z XY-Plane X -X -Z Y X Bandwidth: Bandwidth: more 190MHz than 170MHz (VSWR: less than 2) -X -Y Z -Y Y Vertical polarization Vertical polarization 2.0 2.5 3.0 Horizontal polarization -Z Horizontal polarization X Typical characteristics of radiation pattern@2.45GHz Typical characteristics of VSWR AH 083F245001 ZX-Plane X Z XY-Plane X -X -Z Y Bandwidth:150MHz 2 X -X Z -Y Y -Y Vertical polarization Vertical polarization Horizontal polarization -Z Horizontal polarization X Typical characteristics of radiation pattern@2.45GHz Typical characteristics of VSWR AH 104F2450S1 ZX-Plane Z X XY-Plane X -X -Z Y 300MHz X -X Y -Y Z -Y Vertical polarization -Z Typical characteristics of VSWR Horizontal polarization Vertical polarization Horizontal polarization X Typical characteristics of radiation pattern@2.45GHz This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 192 12 chipantenna01_e-01 ELECTRICAL CHARACTERISTICSTYPICAL CHARACTERISTICS Typical Characteristics on Taiyo Yuden evaluation board AH 104N2450D1 ZX-Plane X Z XY-Plane X -X -Z Y -X X Bandwidth:500MHz -Y Z -Y Y Vertical polarization Vertical polarization Horizontal polarization -Z Typical characteristics of VSWR2GHz band Horizontal polarization X Typical characteristics of radiation pattern@2.45GHz ZX-Plane Z X XY-Plane X -X -Z Y -X Z -Y Y Vertical polarization Vertical polarization 4.9 5.4 5.9 Horizontal polarization -Z Typical characteristics of VSWR5GHz band Horizontal polarization X Typical characteristics of radiation pattern@5.25GHz AH 086M555003 ZX-Plane Z X XY-Plane X -X -Z Y -X Z X -Y Y Vertical polarization Vertical polarization 2 3 4 5 6 7 8 9 10 -Z Typical characteristics of VSWR Horizontal polarization -Y HIGH FREQUENCY PRODUCTS X Bandwidth:1200MHz -Y X Horizontal polarization Typical characteristics of radiation pattern@3.96GHz This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. chipantenna01_e-01 12 193 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 194 12 chipantenna01_e-01 PACKAGING Minimum Quantity Leader and Blank Portion Standard Quantity (pcs) Embossed Tape 2000 3000 1000 4000 Type AF216M, AF816M, AH104F, AH104N AH316M AH083F, AH086M AH212M 160mm or more 100mm or more Tape Material Reel size Taping Dimensions Type A B W T AF216M, AH212M AH316M 1782.0 (7.00.08) 50 min. (2.0 min.) 10.01.5 (0.3940.06) 3.0 max. (0.12 max.) AF816M AH083F 1782.0 (7.00.08) 50 min. (2.0 min.) 17.01.0 (0.670.04) 2.5 max. (0.1 max.) AH104F AH104N 3302.0 (13.00.08) 1001.0 (3.940.04) 25.51.0 (1.00.04) 3.0 max. (0.12 max.) AH086M 330 2.0 (13.00.08) 100 1.0 (3.940.04) 17.0 1.0 (0.670.04) 2.5 max. (0.1 max.) Embossed Tape Unit : mm (inch) Top Tape Strength The top tape requires a peel-off force of 0.10.7N in the direction of the arrow as illustrated below. A B C D Insertion Pitch F AF216M 1.850.2 0.0730.008 2.750.2 0.1080.008 80.2 0.3150.008 3.50.1 0.1380.004 40.1 0.1570.004 1.95 0.077 0.3 0.012 AF816M 1.950.2 0.0770.008 8.40.2 0.3310.008 160.3 0.6300.012 7.50.1 0.2960.004 40.1 0.1570.004 2.05 0.081 0.35 0.014 AH316M 1.90.2 0.0750.008 3.50.2 0.1380.008 80.2 0.3150.012 3.50.1 0.1380.004 40.1 0.1570.004 0.85 0.033 0.3 0.012 AH083F 3.350.2 0.1320.008 8.350.2 0.3290.008 160.3 0.6300.012 7.50.1 0.2950.004 80.1 0.3150.004 1.55 0.061 0.3 0.012 AH104F, AH104N 4.350.2 0.1710.008 10.350.2 0.4070.008 240.3 0.9450.012 11.50.1 0.4350.004 80.1 0.3150.004 1.55 0.061 0.3 0.012 AH086M 6.250.2 0.2460.008 8.260.2 0.3250.008 160.3 0.6300.012 7.50.1 0.2960.004 120.1 0.4730.004 1.3 0.051 0.3 0.012 AH212M 1.50.2 0.0590.008 2.30.2 0.0910.008 80.3 0.3150.012 3.50.1 0.1380.004 40.1 0.1570.004 1.5 0.059 0.3 0.012 Type Chip Cavity Tape Widthness Tape Thickness MAX. K T Unit : mm (inch) This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. chipan_reli_e-01 12 chipan_reli-PRP1 RELIABILITY DATA 1. Operating Temperature Range Specified Value 2. Storage Temperature Range Specified Value Test Methods and Remarks with being taped, 2040 2080 4085 3. Solderability Specified Value At least 90% of immersed terminal surface is covered by new solder. Test Methods and Remarks Solder temperature : 2305 Duration : 31 sec. Preconditioning : Preheating at 150 after immersion into flux. 4. Thermal Shock Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks 1 hour of recovery after 10 times of 30min.immersion alternately at 40 and 85 of temperature,followed by evaluating electrical characteristics. 5. High Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks 1 hour of recovery under standard condition after 96 hours recovery with 85 of temperature, followed by evaluating electrical characteristics. 6. Low Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks 1 hour of recovery under standard condition after 96 hours recovery with 40 of temperature, followed by evaluating electrical characteristics. 7. Humidity Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks 1 hour of recovery under standard condition after 96 hours recovery with 60 of temperature, 9095% relative humidity followed by evaluating electrical characteristics. 8. Resistance to Reflow Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. chipan_reli-PRP2 12 chipan_reli_e-01 PRECAUTIONS 1. PCB Design Land pattern design Please do not arrange the surface and inside layer pattern near the antenna mounting area. Land pattern design Land pattern dimension examples and recommended antenna land pattern Precautions AF216M/816M AH316M Type AF216M AF816M AH212M AH083F AH104F AH104N AH086M L 2.5 8 2 Dimensions P 1.5 7 1 a 3 5 3 Unit : mm Technical Considerations 2. Soldering Conditions of Reflow soldering (for reference) Pb Free Reflow Profile Reflow profile Technical Considerations Components should be preheated to within 100 to 130 from soldering temperature. Assured to be reflow soldering for 2 times. Note : The above profiles are the maximum allowable soldering condition, therefore these profiles are not always recommended. 3. Storage Conditions Storage conditions 1. The Products should not be used in the following environments : exposure to special gases such as (C12, NH3, SOx, NOx) exposure to volatile gas or inflammable gas exposure to a lot of dust exposure to water or condensation Precautions exposure to direct sanlight or freezing 2. The Products should be kept in the following conditions : Temperature : 1040 Humidity : 70RH max. 3. The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before actual usage. Please contact our offices for further details of specifications. All of the standard values listed here are subject to change without notice due to technical improvements. Therefore, please check the specifications carefully before use. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. chipan_reli-PRP3 12 chipan_reli_e-01