J
DO NOT
SCALE FROM
THIS PRINT
HTST-1XX-XX-XX-D-XX-XX
No OF POSITIONS
-02 (STRAIGHT ONLY)
-03 THRU -18, -20, -24,
-25, -28, -30, -32 & -36
-D: DOUBLE ROW
(USE HTST-XX-D)
LEAD STYLE
SEE TABLE 1
& TABLE 2
PLATING SPECIFICATION
-G: GOLD - .000010 Au (CONTACT AREA) OVER .000050 Ni
-T: TIN - .000200 Sn OVER .000050 Ni
-S: SELECTIVE - .000030 Au (CONTACT AREA) OVER .000050 Ni
-L: LIGHT SELECTIVE - .000010 Au (CONTACT AREA),
.000200 Sn ON TAIL, OVER .000050 Ni
-H: HEAVY GOLD - .000030 Au (CONTACT AREA) OVER .000050 Ni
-F: FLASH SELECTIVE - .000003 Au (CONTACT AREA),
.000200 Sn ON TAIL, OVER .000050 Ni
-P: GOLD FLASHED PALLADIUM NICKEL - .000003 Au OVER .000030 PdNi
(CONTACT AREA), .000150 Sn ON TAIL, OVER .000050 Ni
-TM: MATTE TIN - .00010 TO .00030 MATTE TIN OVER .000050 TO .00012 Ni
-SM: SELECTIVE HEAVY GOLD, MATTE TIN TAIL - (SEE -S,& -TM)
-FM: FLASH SELECTIVE GOLD, MATTE TIN TAIL - (SEE -F,& -TM)
-LM: SELECTIVE LIGHT GOLD, MATTE TIN TAIL - (SEE -L,& -TM)
OPTION
BLANK: STRAIGHT (STYLES -04 & -05 N/A)
-RA: RIGHT ANGLE (STYLES -01, -02 & -03 N/A)
-LL: LOCKING LEAD (STRAIGHT ONLY)
-LA: -RA OPTION WITH -LL OPTION
ROW SPECIFICATION
-XX: INDICATES POSITION OMITTED
POLARIZATION OPTION
((No OF POS x .100) + .300) REF
[2.54] [7.62]
((No OF POS x .100) + .200) REF
[2.54] [5.08]
.250 6.35
REF
.100
REF
2.54
.100 2.53
.365 9.27
REF
FIG. 1
HTST-111-01-XX-D-LL SHOWN
04
02
03
01
C
L
.160[4.06] REF (-03 POS)
.200[5.08] REF (ALL OTHER POS)
.015 0.38
REF
.350 8.89
REF
.025
SQ
0.64
REF (TYP)
"A"
"A"
POS #1 INDICATOR
HTST-XX-D
SEE NOTE 6
"A"
(SEE NOTE 4)
.250 6.35
REF
*
.04 1.0
(TYP)
.165
REF
4.19
GOLD PLATE
(SEE NOTE 3)
'B'
SECTION "A"-"A"
SEE NOTE 4
.010[0.25]
.000[0.00]
TERMINAL
(SEE TABLE 1)
C1
C2
*
.0080 0.203
*
.019
MIN
0.49
DETAIL 'B'
SCALE 6 : 1
C3
L
C
= CRIMP LOCATION
-LL & -LA CRIMP LOCATIONS
EVEN POS
ODD POS
.250
REF
6.35
.130 3.30
REF
C
* DIMENSIONS APPLY WHEN USING -LL OPTION ONLY
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
HIGH TEMP TOP SHROUD TERMINAL STRIP
BY:
HTST-1XX-XX-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/16/04
2
1
SHEET SCALE: 1.5:1
INSULATOR: ZENITE 5145, COLOR: NATURAL
ALTERNATE MATERIAL: VECTRA V143LC
COLOR: NATURAL
TERMINAL: PHOS BRONZE
F:\DWG\MISC\MKTG\HTST-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. TERMINAL PUSHOUT FORCE: 3 lbs.
3. ASSEMBLE GOLD PLATED END AS SHOWN.
4. TERMINALS TO BE FLUSH TO .010[.25] BELOW
TOP OF SHROUD.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION J
2
MAX SWAY
(TYP)
04
02
03
01
C
L
-RA & -LA OPTIONS
(HTST-111-04-XX-D-LA SHOWN)
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
FIG. 2
SEE NOTE 4
C4
*
.04
(TYP)
1.0
(SEE TABLE 2)
"B"
*
.0080 0.203
(TYP)
.035
±.010
(TYP)
0.89
±0.25
.100 2.54
90°
C6
C5
TERMINAL #2
(SEE TABLE 2)
TERMINAL #1
(SEE TABLE 2)
C7
(SEE TABLE 2)
"B" REF
"D"
(SEE NOTE 4)
.035
±.010
0.89
±0.25
(TYP)
90°
TERMINAL #2
(SEE TABLE 2)
TERMINAL #1
(SEE TABLE 2)
IN-PROCESS 2
C8
.010[0.25]
.000[0.00]
(SEE TABLE 2)
"C"
TERMINAL #1
(SEE TABLE 2)
IN-PROCESS 1
.010[0.25]
.000[0.00]
TUBE PACKAGING VIEW FOR
04 & 05 LEAD STYLES
* DIMENSIONS APPLY WHEN USING -LA OPTION ONLY
SHEET OF
HIGH TEMP TOP SHROUD TERMINAL STRIP
BY:
HTST-1XX-XX-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/16/04
2
2
SHEET SCALE: 2:1
REVISION J
F:\DWG\MISC\MKTG\HTST-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
