MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Vishay Beyschlag Professional Thin Film Leaded Resistors FEATURES * Available in standard version or CECC version (approved according to EN 140101-806) * Advanced thin film technology * Power dissipation rating up to 1 W * Excellent overall stability: Class 0.25 * Wide professional range: 0.22 to 22 M * Lead (Pb)-free solder contacts * Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes * Compliant to RoHS directive 2002/95/EC * AEC-Q200 qualified available DESCRIPTION MBA/SMA 0204, MBB/SMA 0207 and MBE/SMA 0414 professional leaded thin film resistors are the general purpose resistor for all fields of professional electronics where reliability and stability is of major concern. Typical applications include industrial, telecommunication and medical equipment. APPLICATIONS * Industrial * Telecommunication * Medical equipment METRIC SIZE DIN 0204 0207 0414 A B D CECC TECHNICAL SPECIFICATIONS DESCRIPTION MBA/SMA 0204 CECC Size Resistance Range MBB/SMA 0207 MBE/SMA 0414 A B D 0.22 to 10 M; 0 0.22 to 22 M; 0 0.22 to 22 M Resistance Tolerance 5 %; 1 %; 0.5 % Temperature Coefficient 50 ppm/K; 25 ppm/K Operation Mode Long term Standard Long term Standard Long term Standard Climatic Category (LCT/UCT/Days) 55/125/56 55/155/56 55/125/56 55/155/56 55/125/56 55/155/56 0.25 W 0.4 W 0.4 W 0.6 W 0.65 W 1.0 W Rated Dissipation, P70 Operating Voltage, Umax. AC/DC 200 V 125 C Film Temperature Max. Resistance Change at P70 for Resistance Range, R/R max., After: 350 V 155 C 1 to 332 k 125 C 500 V 155 C 1 to 1 M 125 C 155 C 1 to 2.4 M 1000 h 0.25 % 0.5 % 0.25 % 0.5 % 0.2 % 0.4 % 8000 h 0.5 % 1.0 % 0.5 % 1.0 % 0.4 % 0.8 % 225 000 h 1.5 % - 1.5 % - 1.2 % - Permissible Voltage Against Ambient (Insulation): 1 Minute; Uins 300 V 500 V 800 V Continuous 75 V 75 V 75 V Failure Rate: FITobserved 0.1 x 10-9/h 0.1 x 10-9/h 0.1 x 10-9/h Notes * MB_ series has been merged with the related SMA series to form one series "MB_/SMA__" * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. www.vishay.com 22 For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766 Revision: 23-Jul-10 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION - STANDARD PRODUCTS (1) PART NUMBER: MBB02070C1001FCT00 M B B 0 2 0 7 0 C 1 0 0 1 F C T 0 0 MODEL/SIZE VARIANT TCR/MATERIAL VALUE TOLERANCE PACKAGING (2) SPECIAL MBA0204 = MBA/SMA 0204 MBB0207 = MBB/SMA 0207 MBE0414 = MBE/SMA 0414 0 = Neutral N = RB Radial 5 mm for MBB/SMA0207 S = UB Radial 2.5 mm for MBB/SMA0207 I = L0 Welding joint not lacquered for MBB/SMA 0207 B = KL Lacquered welding joint for MBA/SMA 0204 D = 25 ppm/K C = 50 ppm/K Z = Jumper 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 2 = *102 8 = *10-2 3 = *103 9 = *10-1 4 = *104 0 = *100 5 = *105 1 = *101 6 = *106 0000 = Jumper D = 0.5 % F=1% J=5% Z = Jumper CT C1 RP R2 R4 N4 00 = Standard CT 1K0 PRODUCT DESCRIPTION: MBB/SMA 0207-50 1 % CT 1K0 MBB/SMA 0207 - 50 1% MODEL/SIZE TCR TOLERANCE VARIANT PACKAGING (2) RESISTANCE MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 25 ppm/K 50 ppm/K 0.5 % 1.0 % 5.0 % RB UB L0 KL CT C1 RP R2 R4 N4 1K0 = 1 k 51R1 = 51.1 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - STANDARD PRODUCTS RESISTANCE VALUE (3) DESCRIPTION TCR 50 ppm/K (1) TOLERANCE MBA/SMA 0204 5% 0.22 to 0.91 MBB/SMA 0207 0.22 to 0.91 11 M to 22 M MBE/SMA 0414 0.22 to 0.91 2% - 0.22 to 0.91 - 1% 1 to 10 M 1 to 10 M 1 to 22 M 0.5 % 10 to 475 k 10 to 1 M 10 to 2.4 M 1% 10 to 475 k 10 to 1 M 10 to 2.4 M 0.5 % 10 to 475 k 10 to 1 M 10 to 2.4 M - 10 m; Imax. = 3.0 A 10 m, Imax. = 5.0 A - 25 ppm/K Jumper Notes (1) Standard products are not CECC approved (2) Please refer to table PACKAGING for complete information (3) Resistance value to be selected from E24 series for 5 %, 2 % tolerance, from E24/E96 series for 1 % tolerance and from E24/E192 for 0.5 % tolerance * Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability * The PART NUMBER shown above is to facilitate the unified part numbering system for ordering products Document Number: 28766 Revision: 23-Jul-10 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 23 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION - CECC APPROVED PRODUCTS (1) PART NUMBER: MBB0207VC1001FCT00 M B B 0 2 0 7 V C 1 0 0 1 F C T 0 0 MODEL/SIZE VARIANT TCR/MATERIAL VALUE TOLERANCE PACKAGING (2) SPECIAL MBA0204 = MBA/SMA 0204 MBB0207 = MBB/SMA 0207 MBE0414 = MBE/SMA 0414 V = CECC 06 D = 25 ppm/K C = 50 ppm/K Z = Jumper 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 2 = *102 8 = *10-2 3 = *103 9 = *10-1 4 = *104 0 = *100 5 = *105 1 = *101 6 = *106 0000 = Jumper D = 0.5 % F=1% J=5% Z = Jumper CT C1 RP R2 00 = Standard L0 = Welding joint not lacquered for MBB/SMA 0207 KL = Lacquered welding joint for MBA/SMA 0204 PRODUCT DESCRIPTION: MBB/SMA 0207-50 1 % CECC 06 CT 1K0 MBB/SMA 0207 - 50 1% CECC 06 CT 1K0 MODEL/SIZE TCR TOLERANCE VARIANT PACKAGING (2) RESISTANCE MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 25 ppm/K 50 ppm/K 0.5 % 1.0 % 5.0 % CECC 06 CECC 06 L0 CECC 06 KL CT C1 RP R2 1K0 = 1 k 51R1 = 51.1 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - CECC APPROVED PRODUCTS RESISTANCE VALUE (3) DESCRIPTION TCR (1) TOLERANCE MBA/SMA 0204 5% 0.22 to 0.91 50 ppm/K MBB/SMA 0207 0.22 to 0.91 11 M to 22 M MBE/SMA 0414 0.22 to 0.91 1% 1 to 10 M 1 to 10 M 1 to 22 M 0.5 % 10 to 332 k 10 to 1 M 10 to 2.43 M 1% 10 to 475 k 10 to 1 M 10 to 2.43 M 0.5 % 10 to 332 k 10 to 1 M 10 to 2.43 M - 10 m; Imax. = 3.0 A 10 m, Imax. = 5.0 A - 25 ppm/K Jumper Notes (1) Approval is according to EN 140101-806, version A (2) Please refer to table PACKAGING for complete information (3) Resistance value to be selected from E24 series for 5 %, 2 % tolerance, from E24/E96 series for 1 % tolerance and from E24/E192 for 0.5 % tolerance * Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability * The PART NUMBER shown above is to facilitate the unified part numbering system for ordering products * Radial version (RB, UB) cannot be qualified according to CECC so these can only be ordered as standard products www.vishay.com 24 For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766 Revision: 23-Jul-10 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors Vishay Beyschlag PACKAGING - Axial products REEL TAPING ACC. IEC 60286-1 BOX TAPING ACC. IEC 60286-1 MODEL PIECES CODE PIECES CODE MBA/SMA 0204 5000 RP 1000 5000 C1 CT MBB/SMA 0207 5000 RP 1000 5000 C1 CT MBE/SMA 0414 2500 R2 1000 C1 DIMENSIONS D L I M I d DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions Dmax. (mm) Lmax. (mm) dnom. (mm) Imin. (mm) Mmin. (mm) MASS (mg) MBA/SMA 0204 1.6 3.6 0.5 29.0 5.0 125 MBB/SMA 0207 2.5 6.5 0.6 28.0 10.0 (1) 220 MBE/SMA 0414 4.2 11.9 0.8 31.0 15.0 700 TYPE Note (1) For 7.5 M < 10.0 mm, use version MBB/SMA 0207 ... L0 (welding joint not lacquered) Document Number: 28766 Revision: 23-Jul-10 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 25 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors Vishay Beyschlag PACKAGING - Radial products REEL TAPING ACC. IEC 60286-2 BOX TAPING ACC. IEC 60286-2 MODEL PIECES CODE PIECES CODE 4000 R4 4000 N4 MBB/SMA 0207 RB MBB/SMA 0207 UB MBB/SMA 0207 WITH RADIAL TAPING LEAD SPACING (UB = 2.5 mm), SIZE 0207 DIMENSIONS in millimeters P Insulated Pitch of components P 12.7 1.0 Lead spacing F 2.5 + 0.6, - 0.1 Width of carrier tape W 18.0 + 1.0, - 0.5 Body to hole center H 18.0 2.0 Height for cutting (max.) L 11 Height for bending C 2.5 + 0, - 0.5 Height for insertion (max.) H1 32 Pitch of components P 12.7 1.0 Lead spacing F 5.0 + 0.6, - 0.1 Width of carrier tape W 18.0 + 1.0, - 0.5 Body to hole center H 18.0 2.0 Lead crimp to hole center H0 16.0 0.5 Height for cutting (max.) L 11 Height for bending C 2.5 + 0, - 0.5 Height for insertion (max.) H1 32 C 3 max. H1 F H L W Direction of unreeling LEAD SPACING (RB = 5.0 mm), SIZE 0207 DIMENSIONS in millimeters P Insulated C H L 3 max. H1 F H0 W Direction of unreeling www.vishay.com 26 For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766 Revision: 23-Jul-10 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors DESCRIPTION Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body and conditioned to achieve the desired temperature coefficient. Plated steel termination caps are firmly pressed on the metallized rods. A special laser is used to achieve the target value by smoothly cutting a helical groove in the resistive layer without damaging the ceramics. Connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. The resistor elements are covered by a light blue protective coating designed for electrical, mechanical and climatic protection. Four or five color code rings designate the resistance value and tolerance in accordance with IEC 60062. The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1 or for the radial versions in accordance to IEC 60286-2. ASSEMBLY Vishay Beyschlag * 2000/53/EC End of Vehicle Life Directive (ELV) and Annex II (ELVII) * 2002/95/EC Restriction of the Substances Directive (RoHS) use of Hazardous * 2002/96/EC Waste Electrical and Electrical Equipment Directive (WEEE) APPROVALS The resistors (CECC version) are approved within the IECQ-CECC Quality Assessment System for Electronic Components to the detail specification EN 140101-806 which refers to EN 60115-1 and EN 140100 and the variety of environmental test procedures of the IEC 60068 series. Conformity is attested by the use of the CECC logo ( ) as the Mark of Conformity on the package label for the CECC version. Vishay BEYSCHLAG has achieved "Approval of Manufacturer" in accordance with IEC QC 001002-3, clause 2. The release certificate for "Technology Approval Schedule" in accordance with CECC 240001 based on IEC QC 001002-3, clause 6 is granted for the Vishay BEYSCHLAG manufacturing process. The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Excellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping. RELATED PRODUCTS The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth has been proven under extensive testing. For a corelated range of precision TCR and tolerance specifications see the datasheet: The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. This product family of leaded thin film resistors for professional applications is complemented by Zero Ohm Jumpers. * "Precision Thin Film Leaded Resistors", document no. 28767 For products approved to EN 140101-806, version E, with established reliability and failure rate level E7 (Quality factor Q = 0.1), see the datasheet: * "Established Reliability Thin Film Leaded Resistors", document no. 28768 All products comply with GADSL (1) and the CEFIC-EECA-EICTA (2) list of legal restrictions on hazardous substances. This includes full compliance with the following directives: Notes (1) Global Automotive Declarable Substance List, see www.gadsl.org (2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade organisation representing the information and communications technology and consumer electronics), see www.eicta.org/index.php?id=1053&id_article=340 Document Number: 28766 Revision: 23-Jul-10 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 27 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors Vishay Beyschlag Power Dissipation P FUNCTIONAL PERFORMANCE 1 MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 W 0.5 0 - 50 0 50 100 70 C 150 Ambient Temperature amb Power Dissipation P Derating - Standard Operation 1 MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 W 0.5 0 0 - 50 50 100 70 C 150 Ambient Temperature amb Temperature Rise Tr Derating Long Term Operation 80 K 60 40 MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 20 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 W 1.2 Load P Temperature Rise www.vishay.com 28 Rise of surface temperature For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766 Revision: 23-Jul-10 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Pulse Load Pmax. Professional Thin Film Leaded Resistors Vishay Beyschlag MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 100 W 10 1 0.1 10 s 100 s 1 ms 10 ms 100 ms 1s 10 s Pulse Duration ti Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation. Continuous Pulse Load Pmax. Single Pulse MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 100 W 10 1 0.1 10 s 100 s 1 ms 10 ms 100 ms 10 s 1s Pulse Duration ti Maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation. Pulse Voltage U max. Continuous Pulse MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 1 kV 100 V 10 s 100 s 1 ms 10 ms 100 ms 1s 10 s Pulse Duration ti Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation. Pulse Voltage Document Number: 28766 Revision: 23-Jul-10 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 29 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors Test Voltage Vishay Beyschlag 10 kV 1 kV 100 V MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 10 V 10 100 1 k 10 k 100 k 1 M 10 M Resistance Value R Pulse load rating in accordance with IEC 60115-1, 4.27; 1.2 s/50 s; 5 pulses at 12 s intervals; for permissible resistance change 0.5 %. Test Voltage 1.2/50 Pulse 10 kV 1 kV MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 100 V 10 V 10 100 1 k 10 k 100 k 1 M 10 M Resistance Value R Pulse load rating in accordance with IEC 60115-1, 4.27; 10 s/700 s; 10 pulses at 1 minute intervals; for permissible resistance change 0.5 %. Current Noise A1 10/700 Pulse 1 V/V 0.1 MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 0.01 100 1K 10K 100K 1M 10M Resistance Value R Current noise - A1 in accordance with IEC 60195 www.vishay.com 30 For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766 Revision: 23-Jul-10 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors Vishay Beyschlag TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with the following specifications: temperature, upper category temperature; damp heat, steady state, test duration: 56 days) is valid. EN 60115-1, generic specification (includes tests) Unless otherwise specified the following values apply: EN 140100, sectional specification (includes schedule for qualification approval) Temperature: 15 C to 35 C EN 140101-806 (successor of CECC 40101-806), detail specification (includes schedule for conformance inspection) Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). The Test and Requirements table contains only the most important tests. For the full test schedule refer to the documents listed above. The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5202. The tests are carried out in accordance with IEC 60068-2-xx test method and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower category Relative humidity: 45 % to 75 % For performing some of the tests, the components are mounted on a test board in accordance with IEC 60115-1, 4.31. In Test Procedures and Requirements table, only the tests and requirements are listed with reference to the relevant clauses of IEC 60115-1 and IEC 60068-2-xx test methods. A short description of the test procedure is also given. TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2TEST METHOD TEST PROCEDURE Stability for product types: STABILITY CLASS 0.5 STABILITY CLASS 1 STABILITY CLASS 2 1 to 332 k 0.22 to < 1 > 332 k MBB/SMA 0207 1 to 1 M 0.22 to < 1 > 1 M MBE/SMA 0414 1 to 2.4 M 0.22 to < 1 > 2.4 M MBA/SMA 0204 4.5 4.8 Resistance - Temperature coefficient At (20/LCT/20) C and (20/UCT/20) C - Endurance at 70 C: Standard operation mode U = P 70 x R or U = Umax.; 1.5 h ON; 0.5 h OFF - 4.25.3 4.24 5 % R; 1 % R; 0.5 % R - 4.25.1 Endurance at 70 C: Long term operation mode REQUIREMENTS PERMISSIBLE CHANGE (R max.) 50 ppm/K; 25 ppm/K 70 C; 1000 h (0.5 % R + 0.05 ) (1) 0.5 % R 70 C; 8000 h (1 % R + 0.05 ) (2) 1%R 70 C; 1000 h (0.25 % R + 0.05 ) (3) 0.25 % R 70 C; 8000 h ) (4) 0.5 % R U = P 70 x R or U = Umax.; 1.5 h ON; 0.5 h OFF (0.5 % R + 0.05 125 C; 1000 h (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) 1%R - Endurance at upper category temperature 155 C; 1000 h (0.5 % R + 0.05 ) (1 % R + 0.05 ) 2%R 78 (Cab) Damp heat, steady state (40 2) C; 56 days; (93 3) % RH (0.5 % R + 0.05 ) (1 % R + 0.05 ) 2%R Document Number: 28766 Revision: 23-Jul-10 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 31 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors Vishay Beyschlag TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2TEST METHOD TEST PROCEDURE Stability for product types: 4.23 4.23.2 2 (Ba) Climatic sequence: Dry heat Damp heat, cyclic 4.23.3 30 (Db) 4.23.4 1 (Aa) 4.23.5 13 (M) 4.23.6 30 (Db) Damp heat, cyclic - Short time overload 14 (Na) Rapid change of temperature 4.13 4.19 Cold Low air pressure 4.29 45 (XA) Component solvent resistance 4.18.2 20 (Tb) Resistance to soldering heat 4.17 20 (Ta) Solderability 4.22 6 (B4) Vibration 4.7 21 (Ua1) 21 (Ub) 21 (Uc) - 4.40 - 4.16 STABILITY CLASS 0.5 STABILITY CLASS 1 STABILITY CLASS 2 MBA/SMA 0204 1 to 332 k 0.22 to < 1 > 332 k MBB/SMA 0207 1 to 1 M 0.22 to < 1 > 1 M MBE/SMA 0414 1 to 2.4 M 0.22 to < 1 > 2.4 M (0.5 % R + 0.05 ) no visible damage (0.1 % R + 0.01 ) no visible damage (1 % R + 0.05 ) no visible damage (0.25 % R + 0.05 ) no visible damage 2%R no visible damage 0.5 % R no visible damage (0.1 % R + 0.01 ) (0.25 % R + 0.05 ) 0.5 % R (0.5 % R + 0.05 ) (0.5 % R + 0.05 ) (0.5 % R + 0.05 ) 155 C; 16 h 55 C; 24 h; 90 % to 100 % RH; 1 cycle - 55 C; 2 h 8.5 kPa; 2 h; 15 C to 35 C 55 C; 5 days; 95 % to 100 % RH; 5 cycles Room temperature; U = 2.5 x P 70 x R or U = 2 x Umax.; 5 s 30 min at LCT = - 55 C 30 min at UCT= 155 C 5 cycles MBA/SMA 0204: 500 cycles MBB/SMA 0207: 200 cycles MBE/SMA 0414: 100 cycles Isopropyl alcohol + 23 C; toothbrush method Unmounted components; (260 3) C; (10 1) s + 235 C; 2 s solder bath method; SnPb40 + 245 C; 3 s solder bath method; SnAg3Cu0.5 6 h; 10 Hz to 2000 Hz 1.5 mm or 196 m/s2 Robustness of terminations Tensile, bending and torsion Voltage proof URMS = Uins; 60 s IEC 61340-3-1; 3 pos. + 3 neg. MBA/SMA 0204: 2 kV MBB/SMA 0207: 4 kV MBE/SMA 0414: 6 kV Electrostatic discharge (human body model) REQUIREMENTS PERMISSIBLE CHANGE (R max.) Marking legible; no visible damage (0.1 % R + 0.01 ) no visible damage (0.25 % R + 0.05 ) no visible damage 0.5 % R no visible damage Good tinning (> 95 % covered, no visible damage) (0.1 % R + 0.01 ) (0.25 % R + 0.05 ) 0.5 % R (0.1 % R + 0.01 ) (0.25 % R + 0.05 ) 0.5 % R No flashover or breakdown (0.5 % R + 0.05 ) Note (1) (0.4 % R + 0.05 ) for MBE/SMA 0414 (2) (0.8 % R + 0.05 ) for MBE/SMA 0414 (3) (0.2 % R + 0.05 ) for MBE/SMA 0414 (4) (0.4 % R + 0.05 ) for MBE/SMA 0414 www.vishay.com 32 For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766 Revision: 23-Jul-10 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Professional Thin Film Leaded Resistors HISTORICAL 12NC INFORMATION Vishay Beyschlag Resistance Decade * The resistors had a 12-digit numeric code starting with 2312 RESISTANCE DECADE LAST DIGIT 0.1 to 0.999 7 * The subsequent 4 digits indicated the resistor type, specification and packaging; see the 12NC table * The remaining 4 digits indicated the resistance value: 1 to 9.99 8 10 to 99.9 9 100 to 999 1 - The first 3 digits indicated the resistance value 1 k to 9.99 k 2 - The last digit indicated the resistance decade in accordance with resistance decade table 10 k to 99.9 k 3 100 k to 999 k 4 1 M to 9.99 M 5 10 M to 99.9 M 6 Historical 12NC Example The 12NC code of a MBA 0204 resistor, value 47.5 k and TCR 50 with 1 % tolerance, supplied on bandolier in a box of 5000 units was: 2312 905 14753. HISTORICAL 12NC - Resistor type and packaging 2312 ... ..... DESCRIPTION AMMOPACK TYPE TCR 50 ppm/K MBA 0204 25 ppm/K Jumper 50 ppm/K MBB 0207 25 ppm/K Jumper 50 ppm/K MBE 0414 25 ppm/K Document Number: 28766 Revision: 23-Jul-10 REEL TOL. C1 1000 units CT 5000 units R1 1000 units R2 2500 units RP 5000 units 5% 900 3.... 905 3.... 700 3.... - 805 3.... 1% 900 1.... 905 1.... 700 1.... - 805 1.... 0.5 % 900 5.... 905 5.... 700 5.... - 805 5.... 1% 901 1.... 906 1.... 701 1.... - 806 1.... 0.5 % 901 5.... 906 5.... 701 5.... - 806 5.... - 900 90001 905 90001 700 90001 - 805 90001 5% 910 3.... 915 3.... 710 3.... - 815 3.... 1% 910 1.... 915 1.... 710 1.... - 815 1.... 0.5 % 910 5.... 915 5.... 710 5.... - 815 5.... 1% 911 1.... 916 1.... 711 1.... - 816 1.... 0.5 % 911 5.... 916 5.... 711 5.... - 816 5.... - 910 90001 915 90001 710 90001 - 815 90001 5% 920 3.... - - 825 3.... - 1% 920 1.... - - 825 1.... - 0.5 % 920 5.... - - 825 5.... - 1% 921 1.... - - 826 1.... - 0.5 % 921 5.... - - 826 5.... - For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 33 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1