General-purpose Operational Amplifiers /Comparators TROPHY SERIES Comparators LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Description The Universal Standard family LM393 / LM339/ LM2903 / LM2901 monolithic ICs integrate two/four independent comparators on a single chip and feature high gain, low power consumption, and an operating voltage range from 2[V] to 36[V] (single power supply). No.11094EBT03 TROPHY SERIES Dual LM393 family LM393DR LM393PWR LM393DGKR Quad LM2903 family LM339 family LM2903DR LM2903PWR LM2903DGKR LM2903VQDR LM2903VQPWR LM339DR LM339PWR LM2901 family LM2901DR LM2901PWR LM2901VQDR LM2901VQPWR Features 1) Operating temperature range Commercial Grade LM339/393 family : 0[] to + 70[] Extended Industrial Grade LM2903/2901 family : -40[] to +125[] 2) Open collector output 3) Single / dual power supply compatible 4) Low supply current 0.8[mA] typ. (LM393/339/2903/2901 family) 5) Low input-bias current: 25[nA] typ. 6) Low input-offset voltage: 2[mV] typ. 7) Differential input voltage range equal to maximum rating 8) Low output saturation voltage 9) TTL,MOS,CMOS compatible output Pin Assignment 1OUT 1IN- 1 2 1IN+ 3 GN D 4 8 7 1OUT 1 14 OUT3 2OUT 2 13 OUT4 Vcc 3 12 GND Vcc 2OUT 6 2IN- 5 2IN+ LM393DR LM2903DR LM2903VQDR TSSOP8 LM393PW R LM2903PW R LM2903VQPW R www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. LM393DGKR LM2903DGKR 11 4IN+ 2IN+ 5 10 4IN- 1IN- 6 9 3IN+ 8 3IN- 7 SOIC14 LM339DR LM2901DR LM2901VQDR 1/17 4 MSOP8/VSSOP8 2IN- 1IN+ SOIC8 TSSOP14 LM339PW R LM2901PW R LM2901VQPW R 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Absolute Maximum Ratings (Ta=25) Parameter Symbol Supply Voltage Ratings LM393 family LM339 family LM2903 family LM2901 family Unit Vcc-GND +36 V Vid 36 V Input Differential Voltage Common-mode Input Vicm Operating Temperature Topr Storage Temperature Range Tstg -65 to +150 Tj +150 Maximum Junction Temperature -0.3 to +36 0 to +70 V -40 to +125 Electric Characteristics LM393/339 family(Unless otherwise specified, Vcc=+5[V]) Limits Parameter Temperature Symbol range 25 Input Offset Voltage (*1) Input Offset Current (*1) Input Bias Current (*1) Common-mode Input Voltage Range Min. Typ. Max. Min. Typ. Max. 2 7 2 7 IOL Supply Current ICC 88 nA VO=1.4[V] 88 nA VO=1.4[V] 88 9 25 5 50 5 50 Full range 250 150 25 25 250 25 250 Full range 400 400 25 Vcc-1.5 Vcc-1.5 Full range Vcc-2.0 Vcc-2.0 25 25 200 25 200 V/mA 25 0.1 0.1 nA VID=1[V],VO=5[V] Full range 1 1 A VID=1[V],VO=30[V] 25 150 400 150 400 mV VID=-1[V],IOL=4[mA] 89 Full range 700 700 25 6 6 16 mA VID=-1[V],VOL=1.5[V] 89 25 0.8 1 0.8 2 V 88 Vcc=15[V] VO=1.4 to 11.4[V], RL15[k],VRL=15[V] 88 89 RL=,Vcc=5V mA Full range Tre Vcc=5 to 30[V],VO=1.4[V] VIC=VIC(min) 9 VOL Low Level Output Current mV VICR IOH Fig. No. IIB High Level Output Current condition Full range IIO AVD Response Time Unit LM339 family VIO Large Signal Differential Voltage Amplification Low Level Output Voltage LM393 family 2.5 1.3 1.3 0.3 0.3 s 25 89 RL=,Vcc=30[V] RL=5.1[k],VRL=5[V],CL=15pF VIN=100[mVp-p], overdrive=5[mV] RL=5.1[k],VRL=5[V], CL=15pF VIN=TTL-Level input step Vref=1.4[V] 89 (*1) Absolute value www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 2/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note LM2903/2901 family(Unless otherwise specified, Vcc=+5[V]) Limits Parameter Symbol Temperature range 25 Input Offset Voltage (*2) Input Offset Current (*2) Input Bias Current (*2) Common-mode Input Voltage Range Min. Typ. Max. 2 7 2 7 15 15 25 5 50 5 50 Full range 200 200 25 25 250 25 250 Full range 500 500 25 Vcc-1.5 Vcc-1.5 Full range Vcc-2.0 Vcc-2.0 25 25 100 25 100 25 0.1 Full range 1 25 150 25 Full range IOL 25 ICC 25 IIO IIB VOL Tre Condition Fig. No mV Vcc=5 to MAX),VO=1.4[V] VIC=VIC (min) 88 nA VO=1.4[V] 88 nA VO=1.4[V] 88 V 88 V/mV Vcc=15[V],VOUT=1.4 to 11.4[V], RL15[k],VRL=15[V] 88 0.1 nA VID=1[V], VOH=5[V] 1 A VID=1[V], VOH=MAX 400 150 500 150 400 150 400 mV VIN(-)=1[V],VIN(+)=0[V] ISINK4[mA] 89 700 700 6 16 6 16 mA VID=-1[V], VOL=1.5[V] 89 0.8 2 0.8 2 VICR LM2901(*3) Response Time Max. IOH Supply Current Typ. High Level Output Current Low Level Output Current Min. Full range AVD LM2901V(*3) Unit LM2901 family VIO Large Signal Differential Voltage Amplification Low Level Output Voltage LM2903 family 89 RL=,Vcc=5V mA 1 2.5 1 2.5 1.3 1.3 0.3 0.3 s 25 89 RL=,Vcc=MAX(*7) RL=5.1[],VRL=5[V],CL=15pF VIN=100[mVp-p], Overdrive=5[mV] RL=5.1[k],VRL=5[V], CL=15pF VIN=TTL-Level input step Vref=1.4[V] 89 (*2) Absolute value (*3) Supply Voltage Maximum Value LM2901DR, LM2901PWR MAX=30[V], LM2901VQDR, LM2901VQPWR MAX=32[V] www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 3/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Reference Data LM393 family LM393 family LM393 family 1 LM393DGKR LM393PWR 400 LM393DR 200 0 0 25 0.6 0.4 70 0.2 75 100 125 10 20 30 SUPPLY VOLTAGE [V] Fig.1 40 0 OUTPUT SATU RATION VOLT AGE [mV] 25 200 0 2V 300 5V 200 10 20 30 SUPPLY VOLTAGE [V] 36V 100 1.8 1.6 1.4 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [] Fig.4 70 1.0 0.8 0.6 0.4 0 0.2 80 0 2 4 6 8 Fig. 5 Fig. 6 Low Level Output Voltage - Output Sink Current (IOL=4[mA]) (IOL=4[mA]) (VCC=5[V]) LM393 family LM393 family INPUT OFFSET VOLTAGE [mV] 40 30 36V 5V 20 2V 0 LM393 family 8 8 6 6 4 0 2 25 0 -2 70 -4 -6 -8 20 30 40 50 60 70 AMBIEN T TEMPERATURE [] 10 12 14 16 18 20 OUTPUT SINK CURRENT [mA] Output Saturation Voltage - Ambient Temperature Output Saturation Voltage - Supply Voltage 10 25 1.2 0.0 0 40 4 2V 2 5V 0 -2 36V -4 -6 -8 0 80 10 20 30 40 0 Fig. 7 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE [] SUPPLY VOLTAGE [V] Fig. 8 Output Sink Current - Ambient Temperature 80 LM393 family 2.0 0 0 20 30 40 50 60 70 AMBIENT TEMPER ATURE [] Fig. 3 400 0 10 10 Supply Current - Ambient Temperature 500 70 0 5V LM393 family LM393 family OUTPUT SATURATION VOLTAGE [mV] 2V 0.2 Fig.2 500 100 0.4 Supply Current - Supply Voltage Derating Curve 300 0.6 0 0 AMBIENT TEMPERATURE [] . 400 36V 0 70 50 25 LOW LEVEL OUTPUT VOLTAGE [V] 600 0.8 SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] 0.8 INPUT OFFSET VOLTAGE [mV] POWER DISSIPATION [mW] . 0 800 OUTPUT SINK CURR ENT [mA] LM393 family 1 . 1000 Fig. 9 Input Offset Voltage - Supply Voltage Input Offset Voltage - Ambient Temperature (VOUT=1.5[V]) LM393 family . 160 100 0 25 80 60 40 70 20 INPUT OFFSET CURRENT [nA] INPUT BIAS CURRENT [nA] 120 120 36V 100 80 5V 60 40 2V 20 0 10 20 30 40 SUPPLY VOLTAGE [V] Fig. 10 Input Bias Current - Supply Voltage 30 20 0 10 0 25 -10 70 -20 -30 -40 0 0 LM393 family 50 40 140 140 INPUT BIAS CURRENT [nA] LM393 family 160 -50 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [] 80 0 10 20 30 SUPPLY VOLTAGE [V] 40 Fig. 11 Fig. 12 Input Bias Current - Ambient Temperature Input Offset Current - Supply Voltage (*)The data above is ability value of sample, it is not guaranteed. LM393family:0[]~+70[] www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 4/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Reference Data LM393 family 20 10 5V 0 -10 2V -20 -30 -40 -50 25 130 LARGE SIGNAL VOLT AGE GAIN [dB] LARGE SIGNAL VOLTAGE GAIN [dB] 120 110 100 70 0 90 80 70 20 30 40 50 60 70 AMBIENT TEMPERATURE [] 80 0 10 20 30 SUPPLY VOLTAGE [V] Fig. 13 25 100 70 60 40 140 130 120 36V 110 5V 100 90 80 2V 70 60 10 20 30 SUPPLY VOLTAGE [V] 40 0 10 Fig. 16 80 70 0 10 4 3 5mV overdrive 2 20mV overdrive 1 100mV overdrive 80 Large Signal Voltage Gain - Ambient Temperature LM393 family 140 130 120 110 100 90 80 70 60 0 10 20 30 40 50 60 70 AMBIENT TEMPERAT URE [C] 80 Fig. 18 Power Supply Rejection Ratio - Ambient Temperature 5 4 3 5mV overdrive 2 20mV overdrive 100mV overdrive 1 0 0 20 30 40 50 60 70 AMBIENT TEMPERATURE [C] 20 30 40 50 60 70 AMBIENT TEMPERATURE [C] LM393 family . LM393 family RESPONSE TIME (HIGH to LOW) [ ] . . RESPONSE T IME (LOW to HIGH) [s] 80 Common Mode Rejection Ratio - Ambient Temperature 5 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [C] Fig. 17 Common Mode Rejection Ratio - Supply Voltage 0 5V 2V 90 LM393 family POWER SUPPLY REJECTION RAT IO [dB] COMMON MODE REJECTION RATIO[dB] . 140 0 100 Fig. 15 LM393 family 80 110 Fig. 14 160 0 36V 120 40 Large Signal Voltage Gain - Supply Voltage Input Offset Current - Ambient Temperature 120 130 . 10 140 60 60 0 POWER SUPPLY REJECTION RATIO [dB] IN PUT OFFSET CU RRENT [nA] 36V 30 . 140 40 LM393 family LM393 family . LM393 family 50 80 Fig. 19 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [C] 80 Fig. 20 Response Time (Low to High) - Ambient Temperature Response Time (High to Low) -Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[k]) (VCC=5[V],VRL=5[V],RL=5.1[k]) (*)The data above is ability value of sample, it is not guaranteed. LM393family:0[]~+70[] www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 5/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Reference Data LM339 family LM339 family LM339 family . 1 400 LM339DR 200 0 25 70 50 75 0.8 SUPPLY CURRENT [mA] 600 0 0 0.8 LM339PWR SUPPLY CURRENT [mA] 25 0.6 0.4 70 0.2 0 100 125 10 20 30 SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [] . Fig.21 Fig.22 Supply Current - Supply Voltage 25 200 0 400 2V 300 5V 200 36V 100 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [] Fig.24 1.6 1.4 25 1.2 70 1.0 0.8 0.6 0.4 0 0.2 80 0 2 4 6 8 Fig. 25 Fig. 26 Low Level Output Voltage - Output Sink Current (IOL=4[mA]) (IOL=4[mA]) (VCC=5[V]) LM339 family LM339 family 36V 5V 20 2V 10 0 LM339 family 8 8 6 6 INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] 40 30 4 0 2 25 0 -2 70 -4 -6 -8 20 30 40 50 60 70 AMBIEN T TEMPERATURE [] 10 12 14 16 18 20 OUTPUT SINK CURRENT [mA] Output Saturation Voltage - Ambient Temperature Output Saturation Voltage - Supply Voltage OUTPUT SINK CURR ENT [mA] 1.8 0.0 0 40 4 2V 2 5V 0 -2 36V -4 -6 -8 0 80 80 LM339 family 2.0 0 10 20 30 40 50 60 70 AMBIENT TEMPER ATURE [] Supply Current - Ambient Temperature LOW LEVEL OUTPUT VOLTAGE [V] OUTPUT SATU RATION VOLT AGE [mV] OUTPUT SATURATION VOLTAGE [mV] 70 0 10 LM339 family 400 10 20 30 SUPPLY VOLTAGE [V] 2V 0.2 0 500 0 0.4 Fig. 23 LM339 family 500 100 0.6 40 Derating Curve 300 36V 5V 0 0 10 20 30 40 0 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE [] SUPPLY VOLTAGE [V] Fig. 27 Fig. 28 Fig. 29 Output Sink Current - Ambient Temperature Input Offset Voltage - Supply Voltage Input Offset Voltage - Ambient Temperature (VOUT=1.5[V]) LM339 family . 160 LM339 family 160 40 140 INPUT BIAS CURRENT [nA] 140 120 100 0 25 80 60 40 70 120 80 40 0 0 10 20 30 40 SUPPLY VOLTAGE [V] Fig. 30 Input Bias Current - Supply Voltage 5V 60 20 0 36V 100 20 LM339 family 50 INPUT OFFSET CURRENT [nA] POWER DISSIPATION [mW] . 800 INPUT BIAS CURRENT [nA] LM339 family 1 1000 2V 30 20 0 10 0 25 -10 70 -20 -30 -40 -50 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [] 80 0 10 20 30 SUPPLY VOLTAGE [V] 40 Fig. 31 Fig. 32 Input Bias Current - Ambient Temperature Input Offset Current - Supply Voltage (*)The data above is ability value of sample, it is not guaranteed. LM339family:0[]~+70[] www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 6/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Reference Data LM339 family 20 10 5V 0 -10 2V -20 -30 -40 -50 130 LARGE SIGNAL VOLT AGE GAIN [dB] LARGE SIGNAL VOLTAGE GAIN [dB] IN PUT OFFSET CU RRENT [nA] 36V 30 . 140 40 LM339 family LM339 family . LM339 family 50 25 120 110 100 70 0 90 80 70 60 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [] 80 140 130 36V 120 110 100 5V 2V 90 80 70 60 0 10 20 30 SUPPLY VOLTAGE [V] Fig. 33 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [C] Fig. 34 Fig. 35 Large Signal Voltage Gain - Supply Voltage Large Signal Voltage Gain - Ambient Temperature 80 . Input Offset Current - Ambient Temperature 0 40 LM339 family 120 25 0 100 80 70 60 40 140 130 120 36V 110 5V 100 90 80 2V 70 60 0 10 20 30 SUPPLY VOLTAGE [V] 40 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [C] Fig. 36 4 3 5mV overdrive 2 20mV overdrive 1 100mV overdrive 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [C] 80 Fig. 39 130 120 110 100 90 80 70 60 0 10 20 30 40 50 60 70 AMBIENT TEMPERAT URE [C] 80 Power Supply Rejection Ratio - Ambient Temperature . LM339 family 5 RESPONSE TIME (HIGH to LOW) [ ] . . LM339 family 140 Fig. 38 Common Mode Rejection Ratio - Ambient Temperature 5 0 80 Fig. 37 Common Mode Rejection Ratio - Supply Voltage RESPONSE T IME (LOW to HIGH) [s] POWER SUPPLY REJECTION RATIO [dB] 140 LM339 family LM339 family POWER SUPPLY REJECTION RAT IO [dB] COMMON MODE REJECTION RATIO[dB] . 160 4 3 5mV overdrive 2 20mV overdrive 100mV overdrive 1 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [C] 80 Fig. 40 Response Time (Low to High) - Ambient Temperature Response Time (High to Low) -Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[k]) (VCC=5[V],VRL=5[V],RL=5.1[k]) (*)The data above is ability value of sample, it is not guaranteed. BA10393F:-40[]~+70[] (*)BA10393F:-40[]+85[] www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 7/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Reference Data LM2903 family LM2903 family SUPPLY CURRENT [mA] 800 600 LM2903PT 600 LM2903DGKR 400 400 LM2903DT 200 LM2903 family LM2903 family 200 1.6 1.6 1.4 1.4 SUPPLY CURRENT [mA] POWER DISSIPATION POWER DISSIPATION Pd [mV] [mW] 800 1000 1.2 1.0 25 -40 0.8 0.6 0.4 0.2 25 25 50 50 75 75 100 100 125 125 AMBIENT TEMPERTURE [] AMBIENT TEMPERATURE 10 . 20 30 Fig. 42 100 25 -40 0 20 30 50 75 100 125 150 LM2903 family 2 200 1.8 150 2V 100 5V 50 36V 1.6 1.4 1.2 25 125 1 0.8 105 0.6 0.4 0.2 -40 0 0 40 -50 -25 SUPPLY VOLTAGE [V] 0 25 50 75 100 125 0 150 2 4 6 8 10 12 14 16 18 Fig. 45 Fig. 46 Output Saturation Voltage - Supply Voltage Output Saturation Voltage - Ambient Temperature Low Level Output Voltage - Output Sink Current (IOL=4[mA]) (IOL=4[mA]) (VCC=5[V]) 5V 36V 20 2V 10 0 8 8 6 6 4 INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] 40 30 LM2903 family LM2903 family LM2903 family -40 2 0 25 -2 105 125 -4 -6 -25 0 25 50 75 100 125 150 4 2V 2 0 5V -2 36V -4 -6 -8 -8 -50 20 OUTPUT SINK CURRENT [mA] SUPPLY VOLTAGE [V] Fig. 44 OUTPUT SINK CURRENT [mA] 25 Supply Current - Ambient Temperature OUTPUT VOLTAGE [V] 105 0 LM2903 family MAXIMUM OUTPUT VOLTAGE [mV] MAXIMUM OUTPUT VOLTAGE [mV] 125 -25 Fig. 43 LM2903 family 10 -50 AMBIENT TEMPERATURE [] Supply Current - Supply Voltage 200 0 2V SUPPLY VOLTAGE [V] [] Fig. 41 50 0.4 40 Derating Curve 150 5V 0.6 0.0 0 150 150 36V 0.8 125 0.0 00 1.0 0.2 105 00 1.2 0 10 20 30 -50 40 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE [] SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [] Fig. 47 Fig. 48 Fig. 49 Output Sink Current - Ambient Temperature Input Offset Voltage - Supply Voltage Input Offset Voltage - Ambient Temperature (VOUT=1.5[V]) LM2903 family LM2903 family 50 140 140 40 120 -40 100 25 80 60 40 105 20 INPUT OFFSET CURRENT[nA] 160 INPUT BIAS CURRENT [nA] INPUT BIAS CURRENT [nA] LM2903 family 160 120 100 36V 80 60 40 5V 20 2V 125 0 5 10 15 20 25 30 35 SUPPLY VOLTAGE [V] Fig. 50 Input Bias Current - Supply Voltage 20 -40 25 10 0 -10 105 125 -20 -30 -40 0 0 30 -50 -50 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE [] Fig. 51 Input Bias Current - Ambient Temperature 0 10 20 30 40 SUPPLY VOLTAGE [V] Fig. 52 Input Offset Current - Supply Voltage (*)The data above is ability value of sample, it is not guaranteed.LM2903family:-40[]+125[] www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 8/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Reference Data LM2903 family LM2903 family 140 40 30 20 2V 10 0 -10 5V -20 36V -30 -40 -50 130 LARGE SINGAL VOLTAGE GAIN [dB] 140 LARGE SINGAL VOLTAGE GAIN [dB] INPUT OFFSET CURRENT [nA] LM2903 family LM2903 family 50 105 125 120 110 100 25 -40 90 80 70 60 -50 -25 0 25 50 75 100 125 150 0 10 AMBIENT TEMPERATURE [] 20 30 130 36V 120 110 100 80 70 60 -50 40 5V 15V 90 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE [] SUPPLY VOLTAGE [V] Fig. 53 Fig. 54 Fig. 55 Input Offset Current - Ambient Temperature Large Signal Voltage Gain - Supply Voltage Large Signal Voltage Gain - Ambient Temperature 125 80 25 -40 60 40 0 10 20 30 40 125 36V 100 75 5V 2V 50 25 0 -25 0 25 Fig. 56 50 75 160 140 120 100 80 60 25 50 100 125 150 -1 0 1 75 2 3 Input Offset Voltage - Input Voltage (VCC=5V) LM2903 family 3 2 -40 25 1 0 -100 100 125 150 105 -80 -60 -40 5 Fig. 58 4 125 4 INPUT VOLTAGE [V] 5 AMBIENT TEMPERATURE [] -20 0 OVER DRIVE VOLTAGE [V] 5 4 3 100mV overdrive 20mV overdrive 5mV overdrive 2 1 0 -50 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE [] Fig. 59 Fig. 60 Power Supply Rejection Ratio - Ambient Temperature Response Time (Low to High) - Over Drive Voltage Response Time (Low to High) - Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[k]) (VCC=5[V],VRL=5[V],RL=5.1[k]) RESPONSE TIME (HIGH TO LOW)[s] 5 4 3 125 105 2 25 Fig. 61 LM2903 family LM2903 family RESPONSE TIME (HIGH TO LOW)[s] -4 LM2903 family RESPONSE TIME (LOW TO HIGH)[s] POWER SUPPLY REJECTION RATIO [dB] 180 0 -2 Fig. 57 LM2903 family -25 125 0 Common Mode Rejection Ratio - Ambient Temperature 200 -50 -40 2 AMBIENT TEMPERATURE [] SUPPLY VOLTAGE [V] Common Mode Rejection Ratio - Supply Voltage 105 25 4 -6 -50 RRESPONSE TIME (LOW TO HIGH)[s] 105 100 6 150 INPUT OFFSET VOLTAGE [mV] 120 COMMON MODE REJECTION RATIO [dB] COMMON MODE REJECTION RATIO [dB] 140 LM2903 family LM2903 family LM2903 family 160 -40 1 5 4 100mV overdrive 3 20mV overdrive 5mV overdrive 2 1 0 0 0 20 40 60 80 100 OVER DRIVE VOLTAGE [V] Fig. 62 -50 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE [] Fig. 63 Response Time (High to Low) - Over Drive Voltage Response Time (High to Low) - Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[k]) (VCC=5[V],VRL=5[V],RL=5.1[k]) (*)The data above is ability value of sample, it is not guaranteed. LM2903family:-40[]+125[] www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 9/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Reference Data LM2901 family LM2901 family 1000 1000 LM2901 family 2.0 LM290PWR 600 600 400 400 LM2901DR 200 200 1.4 25 1.6 -40 1.4 1.2 1.0 0.8 0.6 125 0.4 0 25 50 25 75 50 100 75 125 100 125 AMBIENT TEMPERATURE [] AMBIENT TEMPERATURE [] 0 150 150 10 20 Fig. 64 30 0 25 50 100 25 -40 0 30 100 125 150 Supply Current - Ambient Temperature LM2901 family 2 1.8 150 2V 100 5V 36V 50 1.6 1.4 25 125 1.2 1 0.8 105 0.6 0.4 0.2 -40 0 0 20 75 Fig. 66 OUTPUT VOLTAGE [V] 105 40 -50 -25 SUPPLY VOLTAGE [V] 0 25 50 75 100 125 0 150 2 4 6 8 10 12 14 16 Fig. 68 Output Saturation Voltage - Ambient Temperature Low Level Output Voltage - Output Sink Current (IOL=4[mA]) (IOL=4[mA]) (VCC=5[V]) 8 5V 36V 20 2V 10 0 8 INPUT OFFSET VOLTAGE [mV] INPUT OFFSET VOLTAGE [mV] 30 LM2901 family LM2901 family 40 6 4 -40 2 0 25 -2 105 125 -4 -6 0 25 50 75 100 125 150 6 4 2V 2 0 5V -2 36V -4 -6 -8 -8 -25 20 Fig. 69 Output Saturation Voltage - Supply Voltage LM2901 family 18 OUTPUT SINK CURRENT [mA] SUPPLY VOLTAGE [V] Fig. 67 OUTPUT SINK CURRENT [mA] -25 AMBIENT TEMPERATURE [] LM2901 family MAXIMUM OUTPUT VOLTAGE [mV] MAXIMUM OUTPUT VOLTAGE [mV] 125 -50 2V -50 200 10 0.4 Fig. 65 LM2901 family 0 5V 0.6 40 Supply Current - Supply Voltage 200 50 36V 0.8 SUPPLY VOLTAGE [V] Derating Curve 150 1.0 0.0 0.0 0 1.2 0.2 105 0.2 00 SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] POWER DISSIPATION [mW] POWER DISSIPATION Pd [mW] 1.8 800 800 LM2901 family 1.6 0 10 AMBIENT TEMPERATURE [] 20 30 -50 40 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE [] SUPPLY VOLTAGE [V] Fig. 70 Fig. 71 Fig. 72 Output Sink Current - Ambient Temperature Input Offset Voltage - Supply Voltage Input Offset Voltage - Ambient Temperature (VOUT=1.5[V]) 120 25 -40 100 80 60 40 105 20 160 50 140 40 INPUT OFFSET CURRENT[nA] INPUT BIAS CURRENT [nA] INPUT BIAS CURRENT [nA] 140 120 100 36V 80 60 40 5V 20 2V 125 0 0 0 5 10 15 20 25 30 35 SUPPLY VOLTAGE [V] LM2901 family LM2901 family LM2901 family 160 30 20 -40 10 25 0 -10 105 125 -20 -30 -40 -50 -50 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE [] 0 10 20 30 40 SUPPLY VOLTAGE [V] Fig. 73 Fig. 74 Fig. 75 Input Bias Current - Supply Voltage Input Bias Current - Ambient Temperature Input Offset Current - Supply Voltage (*)The data above is ability value of sample, it is not guaranteed. LM901family:-40[]+125[] www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 10/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Reference Data LM2901 family LM2901 family 30 20 2V 10 0 -10 36V 5V -20 -30 -40 -50 130 125 105 120 110 100 25 -40 90 80 70 60 -50 -25 0 25 50 75 100 125 150 0 10 AMBIENT TEMPERATURE [] 20 30 Fig. 76 25 -40 60 40 10 20 30 40 125 36V 100 75 5V 2V 50 25 120 100 80 60 75 -25 0 25 50 75 -40 2 125 0 -2 -4 -1 0 3 2 105 125 25 -40 1 0 -80 -60 Fig. 82 -40 -20 0 Fig. 83 Power Supply Rejection Ratio - Ambient Temperature RESPONSE TIME (HIGH TO LOW)[s] 125 105 25 -40 1 3 4 5 Input Offset Voltage - Input Voltage (VCC=5V) LM2901 family 5 4 3 5mV overdrive 100mV overdrive 20mV overdrive 2 1 0 -50 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE [] Fig. 84 Response Time (Low to High) - Over Drive Voltage Response Time (Low to High) - Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[k]) (VCC=5[V],VRL=5[V],RL=5.1[k]) LM2901 family LM2901 family 3 2 Fig. 81 OVER DRIVE VOLTAGE [V] 4 1 INPUT VOLTAGE [V] 4 AMBIENT TEMPERATURE [] 5 105 100 125 150 5 -100 100 125 150 100 125 150 -6 -50 RRESPONSE TIME (LOW TO HIGH)[s] 140 75 LM2901 family RESPONSE TIME (LOW TO HIGH)[s] 160 50 4 AMBIENT TEMPERATURE [] 180 2 25 LM2901 family 0 LM2901 family 50 0 25 Fig. 80 25 -25 6 Common Mode Rejection Ratio - Ambient Temperature 0 60 Fig. 78 Fig. 79 -25 70 Large Signal Voltage Gain - Ambient Temperature Common Mode Rejection Ratio - Supply Voltage -50 80 AMBIENT TEMPERATURE [] 150 SUPPLY VOLTAGE [V] 200 5V 15V 90 -50 40 INPUT OFFSET VOLTAGE [mV] 125 100 0 100 LM2901 family COMMON MODE REJECTION RATIO [dB] COMMON MODE REJECTION RATIO [dB] 140 80 110 Large Signal Voltage Gain - Supply Voltage LM2901 family 105 36V 120 Fig. 77 160 120 130 SUPPLY VOLTAGE [V] Input Offset Current - Ambient Temperature POWER SUPPLY REJECTION RATIO [dB] LARGE SINGAL VOLTAGE GAIN [dB] LARGE SINGAL VOLTAGE GAIN [dB] INPUT OFFSET CURRENT [nA] 140 140 40 RESPONSE TIME (HIGH TO LOW)[s] LM2901 family LM2901 family 50 5 4 100mV overdrive 3 20mV overdrive 5mV overdrive 2 1 0 0 0 20 40 60 80 100 OVER DRIVE VOLTAGE [V] -50 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE [] Fig. 85 Fig. 86 Response Time (High to Low) - Over Drive Voltage Response Time (High to Low) - Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[k]) (VCC=5[V],VRL=5[V],RL=5.1[k]) (*)The data above is ability value of sample, it is not guaranteed. LM901family:-40[]+125[] www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 11/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Circuit Diagram Vcc OUT IN+ IN- GND Fig.87 Circuit Diagram (each Comparator) Measurement circuit 1 NULL Method measurement condition Parameter VF S1 S2 S3 Input Offset Voltage VF1 ON ON Input Offset Current VF2 OFF OFF VF3 OFF ON VF4 ON OFF ON ON Input Bias Current VF5 Large Signal Voltage Gain VF6 Vcc,GND,EK,VICR Unit[V LM2903/LM2901 family Calculation Vcc GND EK VICR LM393/LM339 family GND EK VICR ON 5 to 30 0 -1.4 0 5 to 30 0 -1.4 0 1 ON 5 0 -1.4 0 5 0 -1.4 0 2 5 0 -1.4 0 5 0 -1.4 0 5 0 -1.4 0 5 0 -1.4 0 15 0 -1.4 0 15 0 -1.4 0 15 0 -11.4 0 15 0 -11.4 0 ON ON Vcc 3 4 Calculation 1.Input offset voltage (VIO) Vio 0.1[F] VF1 1+ Rf /Rs [V] S1 2.Input offset current (IIO) 500[k] +15[V ] Ri 10[k] V ICR 3.Input bias current (IIb) RK 500[k] DUT Ri 10[k] [A] S2 2x R i (1+ Rf / Rs) 50[k] NULL S3 RS 50[] VF4 - VF3 0.1[F] RS 50[] [A] Ri (1+ R f / Rs) Ib RK EK Vcc VF2 - VF1 Iio Rf 50[k] GND RL 1000[pF] -15[V ] V VF V RL 4.Large signal differential voltage gain (AVD) AV 20x Log 10x (1+ Rf /Rs) Fig.88 Measurement Circuit1 (each Comparator) [dB] VF6 - VF5 www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 12/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Measurement Circuit2 Switch Condition SW No. Supply Current SW 1 SW 2 SW 3 SW 4 SW 5 SW 6 SW 7 OFF OFF OFF OFF OFF OFF OFF Low Level Output Current VOL=1.5[V] OFF ON ON OFF ON ON OFF Low Level Output Current IOL=4[mA] OFF ON ON OFF OFF OFF ON High Level Output Current VOH=36[V] OFF ON ON OFF OFF OFF ON ON OFF ON ON OFF ON OFF RL=5.1[k] Response Time VRL=5[V] Vcc 5[V] A SW1 SW2 SW3 SW4 SW5 SW6 SW7 GND 0[V] RL A VIN- VIN+ V VRL VOL/VOH Fig.89 Measurement Circuit2 (each channel) Input waveform Input waveform VIN VIN over drive +100[mV] 0[V] 0[V] +100[mV] over drive VUOT VUOT Output waveform Output waveform 5[V] 5[V] 2.5[V] 2.5[V] 0[V] 0[V] Tre LH Tre LH Fig.90 Response Time www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 13/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Description of Electrical Characteristics Described below are descriptions of the relevant electrical terms. Please note that item names, symbols, and their meanings may differ from those on another manufacturer's documents. 1. Absolute maximum ratings The absolute maximum ratings are values that should never be exceeded, since doing so may result in deterioration of electrical characteristics or damage to the part itself as well as peripheral components. 1.1 Power supply voltage (Vcc/GND) Expresses the maximum voltage that can be supplied between the positive and negative power supply terminals without causing deterioration of the electrical characteristics or destruction of the internal circuitry. 1.2 Differential input voltage (VID) Indicates the maximum voltage that can be supplied between the non-inverting and inverting terminals without damaging the IC. 1.3 Input common-mode voltage range (VICR) Signifies the maximum voltage that can be supplied to non-inverting and inverting terminals without causing deterioration of the electrical characteristics or damage to the IC itself. Normal operation is not guaranteed within the input common-mode voltage range of the maximum ratings - use within the input common-mode voltage range of the electric characteristics instead. 1.4 Operating temperature range and storage temperature range (Topr,Tstg) The operating temperature range indicates the temperature range within which the IC can operate. The higher the ambient temperature, the lower the power consumption of the IC. The storage temperature range denotes the range of temperatures the IC can be stored under without causing excessive deterioration of the electrical characteristics. 1.5 Power dissipation (Pd) Indicates the power that can be consumed by a particular mounted board at ambient temperature (25C). For packaged products, Pd is determined by maximum junction temperature and the thermal resistance. 2. Electrical characteristics 2.1 Input offset voltage (VIO) Signifies the voltage difference between the non-inverting and inverting terminals. It can be thought of as the input voltage difference required for setting the output voltage to 0V. 2.2 Input offset current (IIO) Indicates the difference of the input bias current between the non-inverting and inverting terminals. 2.3 Input bias current (IIB) Denotes the current that flows into or out of the input terminal, it is defined by the average of the input bias current at the non-inverting terminal and the input bias current at the inverting terminal. 2.4 Input common-mode voltage range (VICR) Indicates the input voltage range under which the IC operates normally. 2.5 Large signal differential voltage gain (AVD) The amplifying rate (gain) of the output voltage against the voltage difference between the non-inverting and inverting terminals, it is (normally) the amplifying rate (gain) with respect to DC voltage. AVD = (output voltage fluctuation) / (input offset fluctuation) 2.6 Supply current (ICC) Indicates the current of the IC itself that flows under specific conditions and during no-load steady state. 2.7 Low level output current (IOL) Denotes the maximum current that can be output under specific output conditions. 2.8 Low level output voltage (VOL) Signifies the voltage range that can be output under specific output conditions. 2.9 High level output current (IOH) Indicates the current that flows into the IC under specific input and output conditions. 2.10 Response time (tre) The interval between the application of input and output conditions. 2.11 Common-mode rejection ratio (CMRR) Denotes the ratio of fluctuation of the input offset voltage when the in-phase input voltage is changed (DC fluctuation). CMRR = (change of input common-mode voltage) / (input offset fluctuation) 2.12 Power supply rejection ratio (PSRR) Signifies the ratio of fluctuation of the input offset voltage when the supply voltage is changed (DC fluctuation). PSRR = (change in power supply voltage) / (input offset fluctuation) www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 14/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Derating Curves 1000 LM393PWR LM2903PWR/VQPWR 600 POWER DISSIPATION Pd [mW] POWER DISSIPATION Pd [mW] 800 LM393PWR LM2903PWR/VQPWR 400 200 LM393DR LM2903DR/VQDR 0 0 25 50 75 100 125 150 LM339PWR LM2901PWR/VQPWR 800 LM339DR LM2901DR/VQDR 600 400 200 0 0 AMBIENT TEMPERATURE [] 25 50 75 100 125 150 AMBIENT TEMPERATURE [] LM393DR/PWR/DGKR LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR LM2901DR/PWR/VQDR/VQPWR Power Dissipation Power Dissipation Pd[W] ja [/W] Package Pd[W] ja [/W] SOIC8 (*8) 450 3.6 SOIC14 610 4.9 TSSOP8 (*6) 500 470 4.0 TSSOP14 870 7.0 Package MSOP8/VSSOP8 (*7) 3.76 ja = (Tj-Ta)/Pd[/W] ja = (Tj-Ta)/Pd[/W] Fig.91 Derating Curves V cc Precautions 1) Unused circuits When there are unused circuits it is recommended that they be connected as in Fig.92, setting the non-inverting input terminalto a potential within the in-phase input voltage range (VICR). 2) Input terminal voltage Applying GND + 36V to the input terminal is possible without causing deterioration of the electrical characteristics or destruction, irrespective of the supply voltage. However, this does not ensure normal circuit operation. Please note that the circuit operates normally only when the input voltage is within the common mode input voltage range of the electric characteristics. GND Fig.92 Disable circuit example 3) Power supply (single / dual) The op-amp operates when the specified voltage supplied is between Vcc and GND. Therefore, the single supply op-amp can be used as a dual supply op-amp as well. 4) Power dissipation Pd Using the unit in excess of the rated power dissipation may cause deterioration in electrical characteristics due to a rise in chip temperature, including reduced current capability. Therefore, please take into consideration the power dissipation (Pd) under actual operating conditions and apply a sufficient margin in thermal design. Refer to the thermal derating curves for more information. 5) Short-circuit between pins and erroneous mounting Incorrect mounting may damage the IC. In addition, the presence of foreign particles between the outputs, the output and the power supply, or the output and GND may result in IC destruction. 6) Terminal short-circuits When the output and Vcc terminals are shorted, excessive output current may flow, resulting in undue heat generation and, subsequently, destruction. 7) Operation in a strong electromagnetic field Operation in a strong electromagnetic field may cause malfunctions. 8) Radiation This IC is not designed to withstand radiation. 9) IC handing Applying mechanical stress to the IC by deflecting or bending the board may cause fluctuations in the electrical characteristics due to piezoelectric (piezo) effects. 10) Board inspection Connecting a capacitor to a pin with low impedance may stress the IC. Therefore, discharging the capacitor after every process is recommended. In addition, when attaching and detaching the jig during the inspection phase, ensure that the power is turned OFF before inspection and removal. Furthermore, please take measures against ESD in the assembly process as well as during transportation and storage. www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. 15/17 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note Ordering part number L M 2 9 0 3 Family name LM393 LM339 LM2901 LM2903 V Q D R Operating Voltage Package type VQ : Tested to 32V None : Tested to 30V D : SOIC PW : TSSOP DGK : MSOP/VSSOP Packaging and forming specification R: Embossed tape and reel SOIC8 <Tape and Reel information> 4.90.2 (MAX 5.25 include BURR) 6 5 0.45Min. 7 3.90.2 6.00.3 8 4 +6 -4 1 2 3 Tape Embossed carrier tape Quantity 2500pcs Direction of feed ( reel on the left hand and you pull out the tape on the right hand The direction is the 1pin of product is at the upper left when you hold ) 4 0.545 0.20.1 0.175 1.3750.1 S 1.27 0.420.1 1pin 0.1 S Reel (Unit : mm) Direction of feed Order quantity needs to be multiple of the minimum quantity. SOIC14 <Tape and Reel information> 8.650.1 (Max 9.0 include BURR) 0.65 0.15 1 1PIN MARK Tape Embossed carrier tape Quantity 2500pcs Direction of feed ( reel on the left hand and you pull out the tape on the right hand The direction is the 1pin of product is at the upper left when you hold ) 7 0.175 0.075 S +0.05 0.22 -0.03 1.375 0.075 1.65MAX 0.515 1.050.2 8 6.0 0.2 3.9 0.1 14 4 +6 -4 +0.05 0.42 -0.04 1.27 0.08 S 0.08 M 1pin Reel (Unit : mm) Direction of feed Order quantity needs to be multiple of the minimum quantity. TSSOP8 <Tape and Reel information> 3.00.1 (MAX 3.35 include BURR) 7 6 0.5 0.15 3 2500pcs Direction of feed ( reel on the left hand and you pull out the tape on the right hand 4 1PIN MARK The direction is the 1pin of product is at the upper left when you hold ) 1.00.2 2 Embossed carrier tape Quantity +0.05 0.145 -0.03 1.0 0.05 S 0.1 0.05 1.2MAX 1 0.525 Tape 5 6.4 0.2 4.4 0.1 8 44 0.08 S +0.05 0.245 -0.04 0.08 M 1pin 0.65 (Unit : mm) www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. Reel 16/17 Direction of feed Order quantity needs to be multiple of the minimum quantity. 2011.06 - Rev.B LM393DR/PWR/DGKR,LM2903DR/PWR/DGKR/VQDR/VQPWR LM339DR/PWR,LM2901DR/PWR/VQDR/VQPWR Technical Note TSSOP14 <Tape and Reel information> 5.00.1 (Max 5.35 include BURR) 4 4 14 1 Tape Embossed carrier tape Quantity 2500pcs Direction of feed ( reel on the left hand and you pull out the tape on the right hand The direction is the 1pin of product is at the upper left when you hold ) 7 1PIN MARK +0.05 0.145 -0.03 0.10.05 S 1.00.05 1.2MAX 0.55 1.00.2 0.50.15 6.40.2 4.40.1 8 0.08 S +0.05 0.245 -0.04 0.65 0.08 1pin M Reel (Unit : mm) Direction of feed Order quantity needs to be multiple of the minimum quantity. MSOP / VSSOP8 <Tape and Reel information> 3.00.1 (MAX 3.35 include BURR) 6 5 0.45 0.15 2 3 4 1PIN MARK Tape Embossed carrier tape Quantity 2500pcs Direction of feed ( reel on the left hand and you pull out the tape on the right hand The direction is the 1pin of product is at the upper left when you hold ) 0.95 0.2 1 +0.05 0.145 -0.03 0.525 0.10.05 S 0.850.05 1.1MAX 7 3.0 0.1 4.9 0.2 8 44 0.08 S +0.05 0.32 -0.04 0.08 M 1pin 0.65 (Unit : mm) www.rohm.com (c) 2011 ROHM Co., Ltd. All rights reserved. Reel 17/17 Direction of feed Order quantity needs to be multiple of the minimum quantity. 2011.06 - Rev.B Datasheet Notice Precaution on using ROHM Products 1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you (Note 1) , transport intend to use our Products in devices requiring extremely high reliability (such as medical equipment equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property ("Specific Applications"), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM's Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASS CLASSb CLASS CLASS CLASS CLASS 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM's Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual ambient temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used; if flow soldering method is preferred, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification Notice - GE (c) 2014 ROHM Co., Ltd. All rights reserved. Rev.002 Datasheet Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use. Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label QR code printed on ROHM Products label is for ROHM's internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since our Products might fall under controlled goods prescribed by the applicable foreign exchange and foreign trade act, please consult with ROHM representative in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. ROHM shall not be in any way responsible or liable for infringement of any intellectual property rights or other damages arising from use of such information or data.: 2. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the information contained in this document. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties. Notice - GE (c) 2014 ROHM Co., Ltd. All rights reserved. Rev.002 Datasheet General Precaution 1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents. ROHM shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny ROHM's Products against warning, caution or note contained in this document. 2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior notice. Before purchasing or using ROHM's Products, please confirm the la test information with a ROHM sale s representative. 3. The information contained in this doc ument is provi ded on an "as is" basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccur acy or errors of or concerning such information. Notice - WE (c) 2014 ROHM Co., Ltd. All rights reserved. Rev.001