SinglFuseTM SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse E n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer SMD design n Surface mount packaging for automated assembly SF-0603SPxxxM Series - Time Lag Multilayer Surface Mount Fuses Electrical Characteristics Model SF-0603SP100M-2 SF-0603SP150M-2 SF-0603SP200M-2 SF-0603SP250M-2 SF-0603SP300M-2 SF-0603SP350M-2 SF-0603SP400M-2 SF-0603SP450M-2 SF-0603SP500M-2 SF-0603SP600M-2 SF-0603SP700M-2 SF-0603SP800M-2 Rated Current (Amps) 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 8.00 Fusing Time Open within 1~120 sec. at 200 % rated current Resistance () Typ.*** 0.200 0.100 0.052 0.041 0.031 0.021 0.017 0.015 0.013 0.010 0.008 0.006 Rated Voltage Interrupting Rating DC 32 V DC 32 V 50 A DC 32 V 80 A *** Resistance value measured with 10 % rated current at 25 C ambient. Tolerance 25 %. **** Melting I2t calculated at 0.001 second pre-arcing time. Typical I2t (A2s) **** 0.093 0.18 0.32 0.63 0.87 1.20 2.30 2.70 3.20 4.00 5.00 7.00 Reliability Testing No. 1 Soldering heat resistance Test Requirement DCR change 10 % No mechanical damage Test Condition 2 Solderability Minimum 95 % coverage One dip at 245 C for 5 seconds 3 Thermal shock DCR change 10 % No mechanical damage 100 cycles between -65 C and +125 C 4 Moisture resistance 5 Salt spray 6 Mechanical vibration 7 8 One dip at 260 C for 60 seconds DCR change 15 % No excessive corrosion 10 cycles DCR change 10 % No excessive corrosion 48 hour exposure, 5 % salt solution Mechanical shock DCR change 10 % No mechanical damage 1500 G, 0.5 ms, half-sine shocks Life No electrical "opens" during testing Voltage drop change shall be less than 20 % of initial value DCR change 10 % No mechanical damage 0.4 inch D.A. or 30 G between 5-3000 Hz Test Reference MIL-STD-202 Method 210 MIL-STD-202 Method 208 MIL-STD-202 Method 107 MIL-STD-202 Method 106 MIL-STD-202 Method 101 MIL-STD-202 Method 204 MIL-STD-202 Method 213 80 % rated current (75 % for < 1 A fuses) Refer to STP for 2000 hours at ambient temperature document between +20 C and +30 C Agency Recognition UL File Number..................................................... E198545 Asia-Pacific: Tel: +886-2 2562-4117 * Email: asiacus@bourns.com EMEA: Tel: +36 88 520 390 * Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 * Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. "SinglFuse" is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SinglFuseTM SF-0603SPxxxM Series Applications n Portable memory n Cell phones n LED lighting n LCD monitors n Rechargeable battery packs n Power tools n Disk drives n Battery chargers n PDAs n Set-top boxes n Digital cameras n Industrial controllers n MP3 players n Battery Management Systems (BMS) SF-0603SPxxxM Series - Time Lag Multilayer Surface Mount Fuses Environmental Characteristics Operating Temperature................................................................................................................................................................. -55 C to +125 C Storage Conditions Temperature............................................................................................................................................................................... +5 C to +35 C Humidity.........................................................................................................................................................................................40 % to 75 % Shelf Life..........................................................................................................................................................2 years from manufacturing date Moisture Sensitivity Level....................................................................................................................................................................................... 1 ESD Classification (HBM)............................................................................................................................................................................ Class 6 Typical Part Marking How to Order Construction SF - 0603 SP 100 M - 2 Represents total content. Layout may vary. MASKING LAYER MARKING SinglFuseTM Product Designator SMD Footprint 0603 = 1608 (EIA 0603) size E Fuse Blow Type SP = Time Lag RATED CURRENT (A) M = 4.00 E = 1.00 T = 4.50 G = 1.50 N = 5.00 I = 2.00 O = 6.00 J = 2.50 P = 7.00 K = 3.00 R = 8.00 L = 3.50 FUSE ELEMENT CERAMIC BODY TERMINATION MARKING Rated Current 100 ~ 800 (1.00 A ~ 8.00 A) MASKING LAYER Structure Type M = Multilayer Packaging Quantity Packaging Type - 2 = Tape & Reel 4,000 pieces per 7-inch reel Product Dimensions Recommended Pad Layout 1.6 0.15 (.063 .006) 0.80 0.15 (.031 .006) 0.80 (.031) 1.00 (.039) 0.80 0.15 (.031 .006) 0.80 0.15 (.031 .006) 0.36 0.15 (.014 .006) DIMENSIONS: 2.20 (.087) MM (INCHES) DERATING (%) Current Rating Thermal Derating Curve 105 100 95 90 85 80 75 70 65 60 55 50 -55 -35 -15 5 25 45 65 85 105 125 MAXIMUM OPERATING TEMPERATURE (C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-0603SPxxxM Series - Time Lag Multilayer Surface Mount Fuses Solder Reflow Recommendations Tp TP MAX. RAMP UP RATE = 3 C/s MAX. RAMP DOWN RATE = 6 C/s TL TEMPERATURE (C) TEMPERATURE (C) TL MAX. RAMP PREHEAT AREAUP RATE = 3 C/s MAX. RAMP DOWN RATE = 6 C/s Tsmax Tsmax Tsmin tp tL tp tL PREHEAT AREA ts Tsmin Ts 25 TIME 25 C TO PEAK TIME 25 TIME 25 C TO PEAK TIME Tc -5 C TC -5 C Profile Feature Preheat / Soak: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (ts) from (Tsmin to Tsmax) Pb-Free Assembly 150 C 200 C 60~120 seconds Liquidous Temperature (TL) Time (tL) maintained above TL 217 C 60~150 seconds Ramp Up Rate (TL to Tp) 3 C / second max. Peak Package Body Temperature (Tp) 260 C Time (tp)* within 5 C of the specified classification temperature (Tc) 30 seconds* Time 25 C to Peak Temperature 8 minutes max. Ramp Down Rate (Tp to TL) 6 C / second max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. 10 sec. max. TEMPERATURE (C) Recommended Temperature Profile for Wave Soldering 260 10 sec. max. TEMPERATURE (C) 260 Wave soldering is suitable for 0603 size models. 150 PREHEATING 150 PREHEATING 120 seconds 120 seconds TIME TIME Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-0603SPxxxM Series - Time Lag Multilayer Surface Mount Fuses 3312 - 2 mm SMD Trimming Potentiometer Average I2t vs. t Curves Average Pre-Arcing Time vs. Current Curves 3.50 A A 3.50 3.00 3.00 A A 2.50 2.50 A A 2.00 2.00 A A 1.50 A A 1.50 1.00 A A 1.00 4.00 A A 4.00 4.50 A A 4.50 5.00 A A 5.00 6.00 6.00 A A 7.00 A A 7.00 8.00 A A 8.00 8.00 8.00 A A 7.00 7.00 A A 6.00 6.00 A A 5.00 5.00 A A 4.50 A A 4.50 4.00 4.00 A A 3.50 3.50 A A 3.00 3.00 A A 2.50 2.50 A A 2.00 2.00 A A 1.50 1.50 A A 1.00 1.00 A A 10000 10000 100100 1000 1000 10 10 1 1 I2t (A22s) I2t (A s) PRE-ARCING TIME (SECONDS) PRE-ARCING TIME (SECONDS) 100100 10 10 0.10.1 1 1 0.01 0.01 0.001 0.001 1 1 0.10.1 10 10 CURRENT CURRENT (A)(A) 100100 0.01 0.01 0.001 0.001 0.01 0.01 0.10.1 1 1 10 10 100100 TIME TIME (SECONDS) (SECONDS) REV. C, 01/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-0603SPxxxM Series TapeTrimming and Reel Packaging Specifications 3312 - 2 mm SMD Potentiometer SF-0603SPxxxM Series per EIA 481-2 Tape Dimensions W 8.00 0.10 (.315 .004) P0 4.0 0.10 (.157 .004) P1 4.0 0.10 (.157 .004) P2 2.0 0.05 (.079 .002) 1.00 0.10 (.039 .004) A0 1.80 0.10 (.071 .004) B0 3.5 0.05 (.138 .002) F 1.75 0.10 (.069 .004) E1 1.50 + 0.10 (.059 + .004) D0 PACKAGING: Paper tape, 4,000 pcs. per reel 13.40 0.50 (.539 .020) 0.8 0.6 0.4 0.2 178.00 1.00 (7.008 .039) DIA. 2.20 0.30 (.087 .012) 13.20 +0.3/-0.2 (.520 +.012/-.008) DIA. 0.8 0.6 0.4 0.2 1.20 0.20 (.047 .008) E1 60.20 0.50 (2.370 .020) DIA. D0 1.40 0.20 (.055 .008) P0 P2 W F DIMENSIONS: B0 P1 AO MM (INCHES) KO DIRECTION OF UNREELING Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and (32 ?+( 3$2".++$"3(5$+8:.41-2; Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change 6(3'.43-.3("$2$122'.4+#"'$"*%.1 -#.!3 (-3'$+ 3$231$+$5 -3(-%.1, 3(.- -#5$1(%83' 324"'(-%.1, 3(.-(2"411$-3 and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R)/1.#4"3(- 42$1 //+(" 3(.-, 85 18 %1.,3'$# 3 2'$$3"' 1 "3$1(23("2 -#/ 1 ,$3$12#4$3.(3'$".,!(- 3(.-.%3'$.41-2(R) product with other components (-3'$42$1<2 //+(" 3(.-.1((3'$$-5(1.-,$-3.%3'$42$1 //+(" 3(.-(32$+%'$"' 1 "3$1(23("2 -#/ 1 ,$3$12.% .41-2(R) /1.#4"3 +2." - -##.5 18(-#(>$1$-3 //+(" 3(.-2 -# "34 +/$1%.1, -"$, 85 18.5$13(,$2$122'.4+# +6 825$1(%8 the actual performance of the Bourns(R)/1.#4"3(-3'$(12/$"(="#$5("$2 -# //+(" 3(.-2 -#, *$3'$(1.6-(-#$/$-#$-3 )4#&,$-321$& 1#(-&3'$ ,.4-3.% ##(3(.- +3$23, 1&(-3.#$2(&-(-3.3'$(1#$5("$.1 //+(" 3(.-3.".,/$-2 3$%.1 #(>$1$-"$2!$36$$-+ !.1 3.18 -#1$ +6.1+#".-#(3(.-2 -+$22.41-2' 2$7/+("(3+8#$2(&- 3$# -(-#(5(#4 +.41-2(R) product as meeting the requirements of a particular industry 23 -# 1#$& .1 / 13("4+ 104 +(=" 3(.-$&+(23$#.11$".&-(9$#.41-2(2-.31$2/.-2(!+$%.1 -8 % (+41$.% -(-#(5(#4 +.41-2(R)/1.#4"33.,$$33'$1$04(1$,$-32.%24"'(-#4231823 -# 1#.1/ 13("4+ 104 +(=" 3(.-2$12 of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to 3'$(1#$5("$2.1 //+(" 3(.-2 Bourns(R)/1.#4"32 1$-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$#%.142$(--4"+$ 1+(%$2 5(-&+(%$"1(3(" +.1+(%$2423 (-(-& //+(" 3(.-2-.1(- -8.3'$1 //+(" 3(.-26'$1$% (+41$.1, +%4-"3(.-, 81$24+3(-/$12.- +(-)418#$ 3'.12$5$1$/1./$138 .1$-5(1.-,$-3 +# , &$-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2 on a case-by-case basis, use of any Bourns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ourns(R)23 -# 1#/1.#4"32 1$-.33$23$#3.".,/+86(3'-(3$#3 3$2$#$1 +5( 3(.-#,(-(231 3(.-23 -# 1#2&$-$1 ++8 .1 -8.3'$1&$-$1 ++8$04(5 +$-3&.5$1-,$-3 +.1& -(9 3(.-23 -# 1# //+(" !+$3./1.#4"32#$2(&-$#.1, -4% "341$#%.1 42$(- (1"1 %3.12/ "$ //+(" 3(.-2.41-2$7/1$22+8(#$-3(=$2.41-2(R) standard products that are suitable for use in aircraft .12/ "$ //+(" 3(.-2.-24"'/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2(R) standard /1.#4"3(- - (1"1 %3.12/ "$ //+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 3 the user's sole risk. '$42$ -#+$5$+.%3$23(-& //+(" !+$3..41-2(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R)"423.,/1.#4"32 1$2/$"( ++8#$2(&-$#!2$-3 61(33$- &1$$,$-3!$36$$-.41-2 -#3'$42$11$& 1#(-&3'$42$ -#+$5$+.%24"'3$23(-&3'$ !.5$/1.5(2(.-2 //+(" !+$3..41-2(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R)/1.#4"32.13$"'-.+.&8%.142$(- "3(5(3($26'("'(-5.+5$3'$ #$2(&-#$5$+./,$-3/1.#4"3(.-42$.123."*/(+(-&.%-4"+$ 1"'$,(" +.1!(.+.&(" +6$ /.-2.1,(22(+$2-.12' ++3'$842$ Bourns(R)/1.#4"32.13$"'-.+.&8(- -8% "(+(386'("'$-& &$2(- "3(5(3($21$+ 3(-&3.24"'#$5("$2'$%.1$&.(-&1$231("3(.-2 //+83. ++42$2 -# //+(" 3(.-23' 35(.+ 3$- 3(.- +.1(-3$1- 3(.- +/1.'(!(3(.-2(-"+4#(-&$,! 1&.2.1(-3$1- 3(.- + 1$&4+ 3(.-2413'$1.41-2(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without /1(.1 43'.1(9 3(.-%1.,.41-2 -#.13'$.5$1-,$-3!$1$2.+#31 -2%$11$#.11$$7/.13$#3. -8/ 138-.3$+(&(!+$ 3.1$"$(5$".,,.#(3($22.%36 1$ -#3$"'-(" +# 3 .3'$, 7(,4,$73$-3/$1,(33$#!8 //+(" !+$+ 6.41-2#(2"+ (,2( -8 -# +++( !(+(38%.12/$"( +/4-(3(5$".-2$04$-3( + (-"(#$-3 +.1(-#(1$"3# , &$2.1+.231$5$-4$2.1+.23/1.=32 -#(( -8 -# ++(,/+($#6 11 -3($2(-"+4#(-&(,/+($#6 11 -3($2 .%=3-$22%.1/ 13("4+ 1/41/.2$-.-(-%1(-&$,$-3 -#,$1"' -3 !(+(38 bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf